Views: 0 Author: Site Editor Ɣeyiɣi si Wotae: 2026-01-23 Dzɔtsoƒe: Teƒe
{ RFID alo NFC inlay nye elektrɔnik nu vevi si wɔa dɔ le smart card si me kadodo mele o, RFID tag, NFC nuwɔna, mɔɖeɖe ƒe ɖaseɖigbalẽ, ʋuɖoɖo ƒe kaɖi, amedzrodzeƒe ƒe safui kaɖi, nunɔamesi ƒe dzesi, alo nusi do ƒome kplii me. Eƒoa nutome sue si wotsɔ wɔ ɖekae kple antenna si ŋu wotrɔ asi le nyuie ale be nusi wowɔ vɔ la nate ŋu aɖo dze kple nuxlẽla si sɔ alo NFC -dɔwɔnu si sɔ kple kaƒomɔ̃.
Le smart card wɔlawo kple RFID integrators gome la, inlay nyuitɔ tiatia bia nu geɖe wu frequency tiatia ko. Ele be nuƒlelawo nawɔ ɖeka kple frequency, kadodo ƒe ɖoɖowɔɖi, chip ƒomea, antenna ƒe nɔnɔme, inlay ƒe ɖoɖo, nusi tsɔa nu, kaɖi mamlɛtɔ tutu, lamination ƒe ɖoɖo, nuxlẽla ƒe nɔnɔme, RF ƒe dɔwɔwɔ, kple nyonyome-dzikpɔkpɔ ƒe nudidiwo.
Ƒe 2026 ƒe mɔfiame sia ɖe RFID kple NFC inlay ƒomevi veviwo me, alesi prelaminated inlays to vovo tso inlays ƒuƒu kple tsi gbɔ, nusiwo wozãna, nusiwo wòle be adzɔnuwo wɔlawo nado kpɔ, kple nyatakaka siwo wòle be B2B nuƒlelawo nana hafi woawɔ wo le agbɔsɔsɔ gã me.
Inlay nye elektrɔnik-nu si le domedome si me chip kple antenna si wotu alo wotsɔ de nusi wotsɔna tsɔa nu me. Le eƒe wɔwɔme nu la, woate ŋu atsɔe aƒo xlãe emegbe wòazu aŋeka, atrɔe wòazu dzesidenu, atsɔe ade nu bubu me, alo atsɔe aƒo ƒu kple nusiwo wotsɔna léa nu kple mo.
Le smart card wɔwɔ me la, zi geɖe la, wotsɔa RFID inlay si wowɔ do ŋgɔ la ɖoa card layer siwo wota kple Overlay film s dome. Wotsɔa laminated ƒoa stack mamlɛtɔa, fanɛ, ƒoa punch, eye ne wodi la, wotrɔa asi le eŋu alo dea encode me be woawɔ contactless card si wowu enu la.
Nusi wotsɔ blae lae afia alesi nusi wowɔ vɔ la awɔ dɔ si me kadodo aɖeke mele o ƒe akpa gãtɔ. Chip tiatia, antenna geometry, conductor nu, kadodo ƒe nyonyome, RF tuning, substrate ƒe titrime, lamination nɔnɔmewo, kple kaɖi mamlɛtɔ wɔwɔ katã ate ŋu akpɔ ŋusẽ ɖe nuxexlẽ ƒe didime, coupling liƒo, asitsatsa ƒe kakaɖedzi, bending tsitretsitsi, kple subɔsubɔ agbenɔƒe dzi.
Le susu sia ta la, ele be woabu chip kple antenna abe RF-ɖoɖo si sɔ ene . Chip, antenna ƒe lolome, conductor, substrate, card ƒe titrime, nuxlẽla, alo nusiwo ƒo xlãe tɔtrɔ ate ŋu atrɔ resonance eye wòatrɔ dɔwɔwɔ.
RFID Inlay Agbalẽvi
Smart card Prelam inlay
RFID inlays nyea ƒuƒoƒo zi geɖe ɖe LF , HF / NFC , kple UHF hatsotsowo me. Frequency kpɔa ŋusẽ ɖe coupling ƒe nuwɔna, nuxlẽla ƒe xɔtuɖaŋu, antenna ƒe didime, nuxexlẽ ƒe didime, anti-collision ŋutete, kple application ƒe nyonyome dzi vevie.
| Mɔ̃ɖaŋununya | Enuenu | Nuxexlẽ ƒe Nuwɔna Siwo Wozãna | Typical Dɔwɔwɔwo |
|---|---|---|---|
| LF RFID | Zi geɖe la, anɔ abe 125 kHz ene | Nuxexlẽ si te ɖe wo nɔewo ŋu le didiƒe kpui aɖe | Mɔɖeɖe ɖe nu ŋu, dɔwɔƒe ƒe ID, lãwo ƒe dzeside |
| HF / NFC | 13.56 MHz ƒe ʋuʋudedi | Tap alo proximity kadodo le protocol kple antenna nu | Smart cards, ʋuɖoɖo, mɔɖeɖe, NFC , agbalẽdzraɖoƒe kple dzesidenu ƒe ɖoɖowo |
| UHF / TSITSI RFID | Anɔ abe 860–960 MHz le nuto ɖesiaɖe me | Nuxexlẽ si didi wu kple esi me woŋlɔa dzesi geɖe ɖo | Asitsatsa, nudɔdɔwo, nudzraɖoƒewo, nunɔamesiwo kple nuzazãwo ƒe kɔsɔkɔsɔwo yometiti |
LF RFID wozãa inlays zi geɖe le afisiwo wòhiã be woade dzesi nu le didiƒe kpui aɖe, si ŋu kakaɖedzi le. Dɔwɔwɔ siwo bɔ dometɔ aɖewoe nye domenyinu ƒe agbalẽvi siwo wotsɔ kpɔa amewo gbɔe, lãwo ƒe dzesidegbalẽvi, dɔwɔƒewo ƒe dzesidegbalẽvi, kple dedienɔnɔ ƒe ɖoɖo tiatia aɖewo.
Ele be woagblɔ LF ɖoɖowo to chip kple nuxlẽla ƒe nudidi siwo sɔ pɛpɛpɛ zazã me tsɔ wu be woazã frequency ɖeɖeko, elabena ŋkuɖodzinu, UID ƒe nuwɔna, coding, ɖaseɖiɖi, kple nuxlẽla ƒe sɔsɔ to vovo le chip ƒomewo dome.
Wozãa 13.56 MHz HF mɔ̃ɖaŋununya geɖe na smart card siwo ŋu kadodo mele o, mɔɖeɖe ƒe ɖaseɖigbalẽwo, ʋuɖoɖo ƒe gbalẽviwo, agbalẽdzraɖoƒe ƒe ɖoɖowo, sukuxɔ me gbalẽviwo, amedzrodzeƒe ƒe safuiwo, dzesidegbalẽviwo, kple NFC -siwo woate ŋu awɔ dɔ le.
Nuƒleƒe vevi aɖee nye be 13.56 MHz meɖea ɖoɖowɔɖia gɔme o . Dɔwɔwɔwo ateŋu azã ISO /IEC 14443 Ƒomevi A, ISO /IEC 14443 Ƒomevi B, ISO /IEC 15693, NFC Forum Tag Ƒomeviwo, alo dɔwɔwɔ ƒe xɔtuɖoɖo bubu si wodo alɔe.
NFC ISO me. Ele be IC tututu nasɔ kple nuxlẽla, kɔmpiutadziɖoɖo, ŋkuɖodzinu, dedienɔnɔ, kple ɖaseɖigbalẽ ƒe nudidiwo ɣesiaɣi.
UHF RFID wozãa inlays geɖe le nudzraɖoƒewo, nudɔdɔwo, asitsatsa, nudzraɖoƒewo ƒe nuwo wɔwɔ le wo ɖokui si, nunɔamesiwo dzikpɔkpɔ, nuzazãwo ƒe kɔsɔkɔsɔwo yometiti, awuwo ƒe dzesidede, kple dɔ bubu siwo hiã be woade dzesi nu geɖe kabakaba.
To vovo na HF smart-card dɔwɔɖoɖo siwo bɔ la, UHF ƒe dɔwɔwɔ sea veve ŋutɔ le antenna ƒe mɔfiame, nuxlẽla ƒe ŋusẽ, nusiwo ƒo xlãe, tsiwo, gawo, nubablɛwo wɔwɔ, nutome ƒe ɣeyiɣi ƒe sededewo, kple tag ɖoɖo nu. Eyata ele be woaɖo kpe Inlay tiatia dzi le taɖodzinu ƒe nuwɔna ŋutɔŋutɔ dzi ɣesiaɣi si wòanya wɔ.
Vodada siwo bɔ wu le RFID nuƒle me dometɔ ɖekae nye be nàgblɔ '13.56 MHz' alo ' NFC ' ko evɔ màɖe ɖoɖowɔɖi kple chip gɔme o. Adzɔnu eve ate ŋu awɔ dɔ le ɣeyiɣi ɖeka me gake womate ŋu awɔ dɔ kple nuxlẽla, kɔmpiutadziɖoɖo, sedede ɖeka, ŋkuɖodzinu ƒe xɔtuɖaŋu, alo dedienɔnɔ ƒe ɖoɖo ɖeka kokoko o.
| Mɔ̃ɖaŋununya ƒe Mɔfiame | Dzidzenu si bɔ / Positioning | Zãzã si bɔ | Ele be Nuƒlela Naɖo kpe edzi |
|---|---|---|---|
| HF Teteɖeanyi ƒe Kpekpeɖeŋugbalẽvi | ISO /IEC 14443 Ƒomevi A alo Ƒomevi B | Mɔɖeɖe, ʋuɖoɖo, ɖaseɖigbalẽ siwo le dedie | Chip, nuxlẽla, dedienɔnɔ, dɔwɔɖoɖo |
| NFC Tag ƒe dzesi | NFC Forum Ƒomevi 2, Ƒomevi 4, Ƒomevi 5 alo ƒomevi bubu si wodo alɔe | Telefon dzi kadodo, URLwo, ɖaseɖiɖi, adzɔnuwo ƒe nuwɔwɔ | NDEF ŋkuɖodzinu, telefon ƒe ɖekawɔwɔ, dedienɔnɔ kple dɔwɔwɔ |
| HF Nutoa me | ISO /IEC ƒe 15693 | Agbalẽdzraɖoƒe, nunɔamesiwo kple nuto-kaɖi ƒe ɖoɖowo | Nuxlẽla ƒe ɖoɖowɔɖi, antenna ƒe lolome kple taɖodzinu ƒe kadodo ƒe didime |
| UHF RFID | E PC Gen2 / ISO /IEC 18000-63 ƒe nɔnɔmewo | Asitsatsa, nudɔdɔwo kple nudzraɖoƒewo | Nuto, antenna tuning, nuxlẽla, nusiwo wotsɔ wɔe kple wo ɖoɖo |
Nya 'inlay' ƒo nu tso xɔtutu geɖewo ŋu. Ele be nuƒlelawo naɖe eme nenye be woatsɔ akpa si le eme la aƒo ɖe aŋeka me, atrɔe wòazu dzeside si te ŋu nɔa te ɖe nyaƒoɖeamenu nu, alo woatsɔe ade nu bubu me.
| Inlay Ƒomevi | Xɔtuɖaŋu | Gbãtɔ Nuƒlela | Zãzã Gbãtɔ |
|---|---|---|---|
| Prelam inated Inlay ŋkɔ. | Chip kple antenna takpɔkpɔ le plastic ƒuƒoƒo me | Smart-card wɔƒe | Lamination ɖe plastic-kaɖi siwo wowɔ vɔ me |
| Ƒuƒu Inlay | Chip kple antenna le nusi wotsɔna tsɔa nu dzi si me womewɔ aŋenu mamlɛtɔ si sea nyaƒoɖeamenu o | Trɔla, tag wɔla, kaɖi alo adzɔnuwo ƒe ƒuƒoƒo | Embedding, encapsulation alo tɔtrɔ bubu |
| Tsidzadza Inlay | RFID inlay si wona kple nyaƒoɖeamenu-sensitive adhesive kple release liner | Label trɔla alo RFID ƒoƒo ɖekae | RFID dzeside ƒe tɔtrɔ kple dɔwɔwɔ tẽ si sɔ |
| Module Tɔxɛ / Trɔ asi le Inlay | Dɔwɔwɔ-koŋ chip, antenna alo encapsulated xɔtutu | OEM alo ɖoɖo tɔxɛ aɖe ƒe ƒuƒoƒo | Kpekpeɖeŋugbalẽviwo, dzesiwo, dɔwɔƒewo alo nusiwo wotsɔ de eme |
Le smart-card wɔlawo gome la, zi geɖe la RFID inlays siwo wowɔ do ŋgɔe nyea xɔtuɖoɖo si sɔ wu elabena ele be elektrɔnikmɔ̃awo natsi agbe le card lamination, cooling, punching, printing, kple personalization ƒe dɔwɔwɔ siwo kplɔe ɖo me.
Carrier kple prelam nuawo kpɔa ŋusẽ ɖe lamination ƒe nuwɔna, didime ƒe liƒo, asitɔtrɔ le nɔnɔmewo ŋu, dzoxɔxɔ ƒe tsitretsitsi, kaɖi tutu, kple ɣeyiɣi didi ƒe mɔ̃ɖaŋudɔwɔwɔ dzi. Ele be woatia nusi sɔ le agbalẽvi mamlɛtɔ ƒe ƒuƒoƒo nu tsɔ wu be woatiae le gazazã ɖeɖeko nu.
| Nusiwo Wozãna | Viɖe si | Wozãna Typical Dɔwɔwɔ Mɔfiame | Vevietɔ Validation |
|---|---|---|---|
| PET | Dimensional liƒo kple dzoxɔxɔ ƒe tsitretsitsi si ŋu viɖe le | Antenna tsɔla kple lamination xɔtuɖoɖo tiatia aɖewo | Bonding, lamination dzoxɔxɔ kple kaɖi xɔtutu si wowu enu |
| PVC | Wozãnɛ le afisiafi eye wòwɔa ɖeka kple kaɖi ƒe ɖoɖo geɖe siwo wozãna ɖaa | Smart card siwo wozãna ɖaa kple mɔɖeɖegbalẽviwo | Dzoxɔxɔ, nyaƒoɖeamenu, didime ƒe liƒo kple kaɖi ƒe ƒuƒoƒo |
| PETG | Sesẽme kple kaɖi tutu ƒe mɔnukpɔkpɔ bubuwo | Premium kple specialty card tiatia aɖewo | Layer ƒe sɔsɔ kple lamination nɔnɔmewo |
| Polycarbonate si wotsɔ wɔa dɔe | Kpekpeɖeŋugbalẽvi ƒe xɔtuɖaŋu siwo nɔa anyi didina ŋutɔ eye womete ŋu nɔa te ɖe dzoxɔxɔ nu | Dzesidede dɔ siwo le dedie eye wonɔa anyi didi | Dzoxɔxɔ gã ƒe dɔwɔwɔ, antenna takpɔkpɔ kple kaɖi mamlɛtɔ ƒe dzedze |
| Pepa / Fiber tsɔla | Xɔtutu si me kɔ na dzesideŋkɔwo ƒe dɔwɔwɔ tiatia aɖewo | RFID dzesidewo, tikitiwo kple nubablɛ siwo do ƒome kplii | Fafa, adhesive, tɔtrɔ kple agbenɔƒe ƒe nudidiwo |
Chip lae ɖoa ŋkuɖodzinu, ɖoɖowɔɖi, dedienɔnɔ, sedede ƒe ɖoɖo, UID ƒe nuwɔna, nya ɣaɣlawo ƒe ŋutete, dɔwɔwɔ ƒe xɔtuɖaŋu, kple nuxlẽla ƒe sɔsɔ si le nu mamlɛtɔa me ƒe akpa gãtɔ.
Le gɔmedzedze NFC asitsatsa kaɖi gome la, ŋkuɖodzinu ƒe lolome, NDEF ƒe ŋutete, smartphone ƒe sɔsɔ, nyagbegbɔgblɔ ƒe nɔnɔmewo, kple URL ƒe didime ateŋu anɔ vevie. Be nàte ŋu age ɖe eme dedie alo atsɔe ayi teƒe bubu la, dɔwɔnu ƒe faɛlwo, nya ɣaɣlawo, safuiwo dzikpɔkpɔ, ame ŋutɔ ƒe tɔtrɔ, asitsatsa ƒe duƒuƒu, nuxlẽla ƒe xɔtuɖoɖowo, kple ɖaseɖigbalẽ ate ŋu anɔ vevie wu.
IC si le dedie nye dedienɔnɔ ƒe xɔtuɖaŋu ƒe akpa ɖeka ko. Ele be woatrɔ asi le safuiwo wɔwɔ, safuiwo dodo, vovototodedeameme, nuxlẽla ƒe kpeɖodzinana, megbenyawo, mɔɖeɖe ƒe gomenɔamesiwo, kaɖia ƒe ame ŋutɔ tɔ, nudzɔla ƒe ɖoɖowo, kple agbenɔnɔ dzikpɔkpɔ hã ŋu nyuie.
Mele be woaɖɔ RFID alo HF inlay si nye generic le eɖokui si be esɔ na fexexe, dziɖuɖu ƒe ID, mɔzɔzɔ si ŋu wowɔ ɖoɖo ɖo, alo ɖaseɖigbalẽ bubu siwo le dedie ŋutɔ o. Ðoɖo mawo ate ŋu abia be woawɔ chips siwo ŋu woɖo kpee, woawɔ wo ŋudɔ nyuie, woatrɔ asi le wo ŋu dedie, woada asi ɖe ɖoɖoa dzi, woado wo kpɔ le nudokpɔƒe, eye woaxɔ dɔa koŋ ƒe dzeside.
Antenna ƒe wɔwɔme nye mɔ̃ɖaŋudɔwɔwɔ ƒe afɔɖeɖe vevitɔwo dometɔ ɖeka le RFID alo NFC dɔ me. Antenna ƒe didime, tɔtrɔ ƒe xexlẽme, mɔfiala ƒe kekeme, mɔfianu ƒe nu, kadodomɔnu, chip ƒe ŋusẽ, substrate, kaɖi ƒe titrime si wowu enu, kple nuto si ƒo xlãe katã kpɔa ŋusẽ ɖe RF ƒe nuwɔna dzi.
Akɔbli-ka antenna si wotsɔ de eme.
Aluminium antenna si woŋlɔ ɖe edzi.
Akɔbli si woŋlɔ ɖe agbalẽ dzi alo xɔtunu bubu siwo ku ɖe dɔa koŋ ŋu.
Antenna ƒe geometri tɔxɛ siwo wowɔ na taɖodzinu ƒe chip kple nusi wowɔ.
Antenna si wɔa dɔ nyuie abe inlay si le ʋuʋu ɖi ene ateŋu awɔ nu le mɔ bubu nu ne wotsɔe ƒo xlãe le PVC , PETG , alo polycarbonate layers me vɔ. Agbalẽtata ƒe nuŋlɔtsiwo, ga ƒe ŋusẽkpɔɖeamedzi, nusiwo léna ɖe nu ŋu, elektrɔnikmɔ̃ siwo te ɖe wo ŋu, nuxlẽla ƒe antenna ƒe nɔnɔme, kple nu mamlɛtɔ ƒe titrime hã ate ŋu akpɔ ŋusẽ ɖe kadodoa dzi.
Eyata le B2B dɔ veviwo gome la, ele be woalé ŋku ɖe RF ƒe dɔwɔwɔ ŋu le inlay stage kple le card lamination mamlɛtɔ megbe siaa.
Alesi wowɔa dɔae tututu nɔ te ɖe nenye be wozãa antenna siwo ŋu woŋlɔ nu ɖo, ka si wotsɔ de eme, nusiwo wotsɔ de eme ƒuƒu, nusiwo wotsɔ ƒo tsii, alo kaɖi siwo wotsɔ lãgbalẽ wɔe do ŋgɔ dzi. Zi geɖe la, dɔnyala bibiwo ƒe nuwɔwɔ ƒe dɔwɔwɔ lɔa akpa vovovo siwo dzi wokpɔna ɖe eme.
Wozãa mɔ̃ si wotia kple geometry tsɔ wɔa antenna la. Dimensional ƒe nyateƒetoto le vevie elabena tɔtrɔ suewo ate ŋu akpɔ ŋusẽ ɖe inductance, resonance, kple coupling ƒe dɔwɔwɔ dzi.
Wotsɔa elektrikŋusẽ ƒoa IC la ɖe antenna la ŋu to kadodo alo eƒoƒo ƒe mɔnu si sɔ zazã me. Ele be kadodo ƒe nyonyome nate ŋu anɔ te ɖe nusi wowɔ vɔ ƒe tɔtrɔ, lamination, bending, kple eŋudɔwɔwɔ ƒe nɔnɔme siwo ava emegbe nu.
Le smart-card prelaminated inlays gome la, wokpɔa antenna kple chip ƒe wɔwɔme ta le plastic ƒuƒoƒo siwo sɔ me kple multi-card ƒe ɖoɖo si hiã, ŋkɔ ŋɔŋlɔ, agbalẽ ƒe didime, kple eƒe titrime mamlɛtɔ.
Dodokpɔ ateŋu anye chip ƒe dzesidede, elektrikŋusẽ ƒe yiyi, RF ƒe ŋuɖoɖo, nuxexlẽ/ŋɔŋlɔ ƒe dɔwɔwɔ, didime me toto, dzedzeme, bending resistance, lamination simulation, alo project-specific environmental testing.
Ele be woada dɔnyala ƒe inlay kpɔ ɖe nudidi siwo woate ŋu adzidze siwo sɔ na dɔwɔwɔ la nu tsɔ wu be woatsɔ numeɖeɖe siwo wozãna le mɔ gbadza nu abe 'long range' alo 'high quality.'
| Performance Item | Why It Matters | Typical Validation |
|---|---|---|
| RF ƒe Ŋuɖoɖo | Ekpɔa kadodo ƒe liƒo kple nuxlẽla si woɖo taɖodzinu na | Frequency alo coupling dzidzedze kple dɔwɔwɔ ƒe nuxexlẽ dodokpɔ |
| Nuxexlẽ ƒe Adzɔge | Ekpɔa ŋusẽ ɖe zãla ƒe nuteƒekpɔkpɔ kple ɖoɖoa ƒe dɔwɔwɔ dzi | Doe kpɔ kple nuxlẽla, antenna, mɔfiame kple nuto si woɖe fia |
| Chip-Antenna ƒe Kadodo | Kadodo siwo gbɔdzɔ ate ŋu ado kpo nu le lamination alo bending me | Elektrik, mɔ̃ɖaŋu kple dɔwɔwɔ dodokpɔ |
| Agbɔsɔsɔme ƒe Nyateƒetoto | Wohiã na lamination plate kple punching ƒe ŋkɔ ŋɔŋlɔ | Sheet ƒe ɖoɖo kple antenna-teƒe me toto |
| Dzoxɔxɔ Kple Nyaƒoɖeamenu ƒe Tsitretsitsi | Ele be Prelam natsi agbe le kaɖi wɔwɔ me | Lamination-tsatsa ƒe nɔnɔmetata kple nuwuwu-kaɖi dodokpɔ |
| Bending / Mɔ̃ɖaŋununya ƒe Nɔnɔmewɔwɔ | Vevietɔ na agbalẽvi siwo wozãna enuenu | Finished-card flexing kple agbenɔƒe dodokpɔwo |
Mɔɖeɖe ƒe ɖoɖowo ateŋu azã LF teteɖeanyi mɔ̃ɖaŋununya, HF kadodomanɔsitɔwo ƒe chips, alo dedienɔnɔ ƒe dɔwɔnu geɖewo ƒe ɖaseɖigbalẽwo le nuxlẽla ƒe xɔtuɖoɖo kple dedienɔnɔ ƒe xɔtuɖoɖo si woda ɖe eme nu.
Ele be amedzrodzeƒe-kaɖi ƒe dɔwo nawɔ ɖeka kple chip kple inlay la kple gaƒoɖokui ƒe ɖoɖoa, encoder, amedzrodzeƒe-dzikpɔkpɔ ƒe kɔmpiutadziɖoɖo, kaɖi ƒe titrime, agbalẽtatamɔnu, kple gbesiagbe zazã ƒe nɔnɔme.
Zi geɖe la, mɔzɔzɔ kple sukuxɔ me kaɖiwo hiãa asitsatsa kabakaba, kpeɖodzinana dedie, kpekpeɖeŋu nana dɔwɔnu geɖe, nuxlẽla ƒe ɖekawɔwɔ si ŋu kakaɖedzi le, ame ŋutɔ ƒe tɔtrɔ si dzi wokpɔna, kple dɔwɔwɔ ƒe agbenɔƒe didi.
NFC kaɖiwo ateŋu atsɔ smartphones aƒo ƒu ɖe nyatakakadzraɖoƒewo, dijitaal nɔnɔmetatawo, adzɔnuwo ŋuti nyatakakawo, ɖaseɖiɖi ƒe ɖoɖowo, nuteƒewɔwɔ ƒe ɖoɖowo, alo nuteƒekpɔkpɔ bubu siwo wotu ɖe NDEF dzi. Ele be woaɖo kpe chip memory kple telefon ƒe ɖekawɔwɔ dzi hafi woawɔe.
ISO /IEC 15693 HF egbɔkpɔnuwo kple UHF RFID ɖoɖowo wozãna zi geɖe le nunɔamesiwo, agbalẽdzraɖoƒe, asitsaƒewo, ɖoɖowɔwɔ, kple nudzraɖoƒe ƒe nɔnɔme vovovowo me. Tiatia nyuitɔ nɔ te ɖe nuxexlẽ ƒe didime, nudidi siwo hiã be woaxe mɔ ɖe gododo nu, nusiwo woatsɔ awɔ dɔe, nuxlẽla ƒe xɔtuɖoɖo, kple ɖoɖoa ƒe xɔtuɖaŋu dzi.
RFID Kpekpeɖeŋugbalẽvi
HF RFID Smart card
B2B inlay dɔwo hiãna zi geɖe be woatrɔ asi le wo ŋu elabena kaɖidɔwɔƒewo zãa lamination plate vovovowo, punching layouts, finished-card structures, chips, printers, kple reader systems.
Woateŋu atia chip tiatia le ɖoɖowɔɖi, ŋkuɖodzinu, dedienɔnɔ, UID ƒe nudidiwo, nuxlẽla ƒe ɖekawɔwɔ, agbenɔƒe, smartphone ƒe sɔsɔ, dɔwɔɖoɖo ƒe kɔmpiuta dɔwɔɖoɖo, kple dɔa ƒe gazazã nu.
Woate ŋu atrɔ asi le antenna ƒe didime kple etutu ŋu ƒo xlã chip la, kaɖia ƒe lolome, nuxlẽla ƒe nɔnɔme, kaɖia ƒe nu, stack mamlɛtɔ ƒe titrime, kple dɔwɔwɔ si hiã.
Woate ŋu atrɔ asi le agbalẽvi geɖe ƒe ɖoɖowo ŋu be woasɔ kple asisi la ƒe lamination plate, agbalẽtata ƒe ŋkɔ ŋɔŋlɔ, punching machine, kple ewɔwɔ ƒe ɖoɖo. Ele be woatsɔ nɔnɔmetatawo aɖo kpe antenna ƒe nɔƒe kple chip ƒe nɔnɔme dzi hafi woawɔe le agbɔsɔsɔ gã me.
Woateŋu ada PVC , PETG , PET , polycarbonate-compatible, kple dɔ bubu siwo wowɔ koŋ ƒe xɔtuɖoɖowo kpɔ le asisi la ƒe kaɖi mamlɛtɔ ƒe xɔtuɖaŋu kple dɔwɔwɔ ƒe nɔnɔmewo nu.
Bia Trɔtrɔ RFID & NFC Inlay Kpɔɖeŋuwo
Ele be woaɖe nudidi siwo hiã be woakpɔ eƒe nyonyome dzi hafi awɔe. Nyagbɔgblɔ 'wodo 100% kpɔ' mesɔ pɛpɛpɛ o negbe ɖe nudzrala kple asisi lɔ̃ ɖe nɔnɔme siwo tututu wolé ŋku ɖo le teƒe ɖesiaɖe kple dodokpɔ siwo wowɔ to kpɔɖeŋuwo xɔɣi dzi.
Kpɔ IC ƒomevi, UID ƒe nuwɔna le afisi wòsɔ le, lot nyatakaka, ŋkuɖodzinu, ɖoɖowɔɖi, kple dɔwɔwɔ ƒe nɔnɔme siwo hiã la ɖa.
Elektrik dodokpɔwo kpena ɖe ame ŋu wòdea dzesi nutome siwo le ʋuʋu ɖi, kadodo ƒe kuxiwo, chip ƒe gbagbã, kple ŋuɖoɖo siwo mesɔ o hafi inlay la gena ɖe asisi la ƒe kaɖi wɔwɔ ƒe ɖoɖoa me.
Ele be RF ƒe kpeɖodzinana nazã dodokpɔ ƒe nusiwo woɖe fia, nuxlẽlawo, didimewo, mɔfiamewo, ŋusẽ ƒe ɖoɖowo, alo frequency-dzidzenu dɔwɔnuwo le dɔa nu.
Ele be woalé ŋku ɖe agbalẽa ƒe lolome, eƒe titrime, antenna ƒe nɔnɔmetatawo, chip ƒe nɔƒe, eƒe go ƒe nyonyome, ɖiƒoƒo, flitete, kuɖɔ, eƒe nɔnɔmetɔtrɔ, kple ƒuƒoƒo ƒe ɖoɖowɔwɔ ɖe ɖoɖo nu ŋu le ɖoɖo si dzi woda asi ɖo nu.
Le dɔnyala B2B nana gome la, traceability ate ŋu anye chip lot, conductor alo antenna lot, substrate lot, ewɔwɔ ŋkeke, agbalẽ ƒe ɖoɖo, mɔ̃ alo fli, dodokpɔ ƒe ɖoɖowɔɖi, ŋkuléle ɖe nuŋlɔɖiwo, kple packing nyatakakawo.
Inlay ate ŋu ato ŋkuléle ɖe nu ŋu si gbɔna me gake lamination ƒe dzoxɔxɔ si gbɔ eme, nyaƒoɖeamenu, fafa, punching, tata, alo ame ŋutɔ ƒe tɔtrɔ agblẽ nu le eŋu kokoko. Eyata ele be dodokpɔ mamlɛtɔ nanye dodokpɔ le asisi la ƒe nuwɔwɔ ŋutɔŋutɔ megbe.
Dze egɔme kple zazã ƒe nɔnɔme ŋutɔŋutɔ: mɔɖeɖe dzi kpɔkpɔ, amedzrodzeƒe ƒe kaɖi, mɔzɔzɔ ƒe tikiti, NFC dɔwɔgbalẽvi, agbalẽdzraɖoƒe ƒe kaɖi, dɔ si ku ɖe fexexe ŋu, nudzraɖoƒe ƒe dzesi, adzɔnuwo ƒe kpeɖodzi, nunɔamesiwo yometiti, alo dɔwɔnu bubu.
Mègagblɔ zi gbɔ zi geɖe ɖeɖeko o. Na nuxlẽla ƒe ɖoɖowɔɖi si sɔ pɛpɛpɛ, chip ƒe nudidi, NFC Tag Type, alo ɖoɖo si woda ɖe eme le afisiafi si wòanya wɔ le.
Ðe ŋkuɖodzinu, UID, ɖaseɖiɖi, nya ɣaɣla, nyagbe ɣaɣla, gbãtɔ, safui-dzikpɔkpɔ, dɔwɔwɔ ƒe faɛlwo, NDEF nyatakakawo, alo nudidi bubu siwo sɔ na ɖoɖoa gɔme.
Na kaɖi ƒe nu mamlɛtɔ, kaɖi ƒe titrime, agbalẽa ƒe lolome, ɖoɖo, agbalẽtatamɔnu, Overlay film , lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, tsatsam, punching process, kple nu tɔxɛ ɖesiaɖe abe magnetic stripe, signature panel, hologram, alo ga ƒe akpa aɖe.
Le dɔ yeyewo gome la, ele be woawu kpɔɖeŋu ƒe dzeside nu hafi woawɔe le agbɔsɔsɔ gã me. Do inlay la kpɔ kple taɖodzinu xlẽla eye emegbe nàgbugbɔ dodokpɔa awɔ le agbalẽtata, lamination, punching, personalization, kple kpekpe mamlɛtɔ megbe.
Nuwuwu dɔbiagbalẽvi kple asi si woɖo tae.
Ebia zi gbɔ zi geɖe kple ɖoɖowɔɖi.
Chip ƒe kpɔɖeŋu tututu alo chip ƒe tiatia siwo dzi woda asi ɖo.
Nuxlẽla ƒe kpɔɖeŋu alo ɖoɖo ŋuti nyatakaka siwo li xoxo.
Nuxexlẽ ƒe nuwɔna si wobia alo didiƒe si woɖo taɖodzinu na.
Prelam , inlay ƒuƒu, inlay si me tsi le, alo xɔtunu bubu.
PVC , PETG , PET , PC , pepa, alo nu bubuwo.
Agbalẽvi ƒe didime, agbalẽ xatsaxatsa ƒe didime, alo kaɖi ƒe ɖoɖo.
Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.
Lamination ƒe dzoxɔxɔ, nyaƒoɖeamenu, kple ewɔwɔ ƒe ɖoɖo.
Agbalẽtata, punching, encoding, alo ame ŋutɔ ƒe nudidiwo.
Ðaseɖigbalẽ siwo hiã alo sedziwɔwɔ ŋuti nuŋlɔɖiwo.
Kpɔɖeŋu agbɔsɔsɔme kple ƒe sia ƒe alo ɣleti sia ɣleti ƒe agbɔsɔsɔ si wokpɔ mɔ na.
Esi NFC dɔwɔɖoɖowo le kekem ɖe enu le telefon, nuxlẽlawo, kaɖiwo, dzesiwo, dijitaal safuiwo, mɔɖeɖe ƒe ɖoɖowo, kple nusiwo do ƒome kple wo nɔewo geɖe me la, dɔwɔwɔ ɖekae dodokpɔ tso nuwuwu vaseɖe nuwuwu va le vevie wu. Eyata ele be Inlay ƒe dzeside nalɔ nuxlẽla alo mɔ̃ ƒe lãwo ƒe agbenɔnɔ ƒe ɖoɖo ŋutɔŋutɔ ɖe eme ɣesiaɣi si wòanya wɔ.
Dedienɔnɔ ƒe nudidiwo yi edzi le tɔtrɔm, vevietɔ le mɔɖeɖe, dijitaal safuiwo, amenyenye, ʋuɖoɖo, adzɔnuwo ƒe kpeɖodzi, kple dɔwɔnu vevi bubuwo gome. Chip tiatia, megbenyawo ƒe xɔtuɖaŋu, ɖaseɖigbalẽwo ƒe ame ŋutɔ tɔ, safuiwo dzikpɔkpɔ, kple ɖoɖo dodokpɔ ava le vevie wu kpe ɖe ŋutilã me inlay ƒe nyonyome ŋu.
Wole NFC -nuwɔnawo zãm geɖe wu na dijitaal adzɔnuwo ŋuti nyatakakawo, adzɔnu ƒe ŋkɔ ƒe nuwɔwɔ, nyateƒetoto, nuteƒewɔwɔ, babla siwo do ƒome, mɔɖeɖe, kple nuteƒekpɔkpɔ bubu siwo wotu ɖe tap dzi. Esia dzia smartphone ƒe wɔwɔ ɖekae, NDEF ƒe ɖoɖowɔwɔ, scan ƒe teƒe, antenna ƒe wɔwɔme, kple ezãla ƒe nuteƒekpɔkpɔ ƒe vevienyenye ɖe edzi.
Kpekpeɖeŋugbalẽvi kple nusiwo wotsɔ do ƒome kple wo nɔewo wɔlawo yi edzi le xɔtunu siwo le tsɛ wu, mɔ̃wo ƒe nɔnɔme si nyo wu, antenna ƒe nɔnɔme nyuitɔ, kple RFID elektrɔnikmɔ̃wo ƒe ƒoƒo ɖekae nyuie wu ɖe teƒe siwo seɖoƒe li na dim.
Nudidi siwo ku ɖe nusiwo li tegbee ŋu le ŋusẽ kpɔm ɖe nusiwo wotsɔna tsɔa nu, xɔtunu siwo wotsɔ léa nu ɖe nu ŋu, nusiwo wowɔ ƒe kakɛwo, nusiwo wowɔ ƒe kpekpeme, nusiwo woate ŋu azã ake, kple agbenɔƒe ƒe dodokpɔ dzi ɖe edzi. Ele be woatu nyawo ɖe inlay xɔtutu ŋutɔŋutɔ kple nutoa me gbugbɔgazã alo ɖoɖowɔwɔ ƒe nɔnɔme dzi tsɔ wu be woatu nya siwo wozãna le mɔ gbadza nu abe 'eco-friendly.' ene.
Wallis naa RFID prelam inlays, card materials, PVC sheets, PETG sheets, polycarbonate card materials, Overlay film s, kple smart-card wɔwɔ ƒe kuxiwo gbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu na B2B asisiwo.
Woateŋu ada dɔwo kpɔ le ɣeyiɣi si wobia, ɖoɖowɔɖi, chip ƒome, ŋkuɖodzinu, nuxlẽla ƒe ɖekawɔwɔ, dedienɔnɔ ƒe ɖoɖo, kple dɔwɔwɔ nu.
Woate ŋu adzro antenna ƒe wɔwɔme, teƒe si wòle, agbalẽa ƒe ɖoɖo, eƒe didime, eƒe titrime, kple nusi wotsɔ wɔe ƒe wɔwɔme me le kaɖi-wɔwɔ dɔwɔnuwo kple kaɖi mamlɛtɔ tutu nu.
Le dɔ yeyewo gome la, woate ŋu ada kpɔɖeŋuwo kpɔ to asisi la ƒe agbalẽtata, lamination, punching, kple nuxlẽla ƒe nɔnɔme me hafi woaɖo kpe nudɔdɔ gãwo dzi.
Te ɖe Wallis ŋu hena Custom RFID & NFC Inlay s
RFID inlay nye domedome elektrɔnik akpa si me RFID chip kple antenna le alo le eme. Woateŋu atrɔe wòazu smart card, label, tag, ticket, wristband, package, alo nu bubu si ŋu RFID -wɔ dɔ le.
' Inlay ' nye nya si keke ta. Wotrɔ asi le prelaminated inlay ŋu etɔxɛe be wòanye domedome kaɖi-wɔwɔ ƒe agbalẽvi si me wokpɔa chip kple antenna ta le plastic-gbadzɛwo me hafi kaɖi mamlɛtɔ kple punching.
Chip-and-antenna ƒe akpa si wotsɔa nu ƒuƒu wɔe si me womewɔa nu mamlɛtɔ si wotsɔ léa nu ɖe nu ŋu si sea nyaƒoɖeamenu o. Nusi wotsɔ ƒo tsii tsɔa nusi wotsɔna léa nu ɖe nu ŋu si sea nyaƒoɖeamenu kple nusi ɖea asi le eŋu kpena ɖe eŋu hena dzesidenu tɔtrɔ alo esi sɔ tẽe.
Ao, Frequency ɖeɖe mefia NFC ƒe ɖekawɔwɔ o. Ele be woabu chip, kadodo ƒe ɖoɖowɔɖi, NFC Forum Tag Type, data ƒe nɔnɔme, kple smartphone ƒe kpekpeɖeŋu katã ŋu.
Wo ame evea siaa ateŋu awɔ dɔ le 13.56 MHz, gake wonye dzidzenu vovovo siwo me kadodo mele o eye kadodo ƒe nuwɔna kple ɖoɖoa ƒe xɔtuɖoɖowo to vovo. ISO /IEC 14443 do ƒome kple teteɖeanyi kaɖiwo le afisiafi, esime wozãa ISO /IEC 15693 na nuto-kaɖi ƒe dɔwɔwɔwo. Ele be woaɖo kpe nuxlẽla ƒe ɖekawɔwɔ dzi.
Ele be woatia chip la le NDEF ŋkuɖodzinu, URL alo nyatakakawo ƒe lolome, smartphone ƒe sɔsɔ, nyagbe ɣaɣla ƒe nudidiwo, gbãtɔ alo nyateƒetoto ƒe nɔnɔmewo, nuxexlẽ/ŋɔŋlɔ ƒe nudidiwo, kple dɔa ƒe gazazã nu. Ele be woado chip la tututu kpɔ kple telefon siwo woɖo taɖodzinu na hafi woawɔe le agbɔsɔsɔ gã me.
Menye le eɖokui si o. Elektrikŋusẽ ƒe nɔnɔme vovovowo le chip vovovowo ŋu, eye IC tɔtrɔ ate ŋu atrɔ resonance kple RF ƒe dɔwɔwɔ. Ele be woadzidze antenna-chip ƒe ƒuƒoƒoa ahaɖɔe ɖo hafi woawɔe.
Ɛ̃. Prelam inated inlays ateŋu awɔ kple agbalẽ ƒe didime vovovowo, card-array ƒe ɖoɖowo, antenna ƒe nɔƒewo, nuwo, titrime, kple chip tiatia le asisi la ƒe lamination kple punching dɔwɔnuwo nu.
Lamination dzoxɔxɔ, nyaƒoɖeamenu, fafa, punching, agbalẽtata, kple kaɖi mamlɛtɔ ƒe nuzazãwo ate ŋu akpɔ ŋusẽ ɖe antenna, chip ƒe kadodo, resonance, kple RF ƒe dɔwɔwɔ bliboa dzi. Ele be woada asi ɖe prelam si to dodokpɔ gbãtɔ me dzi kokoko be enye agbalẽvi si wowu enu.
Na dɔwɔwɔ, zi gbɔ zi geɖe, ɖoɖowɔɖi, chip ƒe kpɔɖeŋu, nuxlẽla ŋuti nyatakaka, nu, didime, agbalẽa ƒe ɖoɖo, titrime, nuxexlẽ ƒe dɔwɔwɔ si hiã, lamination ƒe nɔnɔmewo, kpɔɖeŋu agbɔsɔsɔme, nudɔdɔ ƒe agbɔsɔsɔ, kple sedziwɔwɔ alo ɖaseɖigbalẽ ŋuti nyatakaka ɖesiaɖe si hiã.
RFID alo NFC inlay nye dɔwɔwɔ ƒe gɔmeɖoanyi na smart card si me kadodo mele o alo nusi do ƒome kplii. Dɔ siwo akpɔ dzidzedze bia be chip, antenna, carrier material, protocol, reader system, RF tuning, card wɔwɔ, ewɔwɔ ƒe ɖoɖo, kple quality-control plan nawɔ dɔ ɖekae abe system ɖeka ene.
Eyata le B2B nuƒlelawo gome la, menye chip si ƒe asi bɔbɔ wu alo nuxexlẽ ƒe didime si wogblɔ be edidi wu koe nye inlay nyuitɔ kekeake o. Enye inlay si naa dɔwɔwɔ li ke le nuxlẽla ƒe nɔnɔme ŋutɔŋutɔ me, tsi agbe le asisi ƒe adzɔnuwo wɔwɔ ƒe ɖoɖoa me, sɔ kple dɔwɔwɔ ƒe ɖoɖowɔɖi kple dedienɔnɔ ƒe nudidiwo, eye woate ŋu awɔe ɣesiaɣi le dzidzenu nu.
RFID & NFC Inlay Nubablɛwo
