RFID Wet Inlay vs Dry Inlay: 10 Nu veviwo & Ƒle Mɔfiame

Wet Inlay vs. Dry Inlay: Gɔmesese Vevi 10 na RFID Nuƒlelawo

RFID tsi inlays kple dry inlays nye akpa vevi siwo wozãna tsɔ wɔa smart labels, NFC stickers, RFID cards, tikitiwo, packaging tags, nunɔamesiwo ƒe dzesiwo kple embedded RFID products. Togbɔ be RFID chip kple antenna le wo ame evea siaa me hã la, wotsɔa wo naa le xɔtuɖoɖo vovovowo me eye woɖo wo na tɔtrɔ ƒe mɔnu vovovowo le anyime.

Le B2B ƒlelawo gome la, mele be woanɔ te ɖe nusi wotsɔ blaa nu le eme dzi ko be woatia nusi wotsɔ blaa nu si me tsi le kple nusi wotsɔ blaa nu ƒuƒui dome o. Tiatia nyuitɔ hã nɔ te ɖe frequency, protocol, chip ƒomea, antenna ƒe didime, tagged nu, taɖodzinu xlẽ didime, adhesive nudidi, lamination ɖoɖo, agbalẽ xatsaxatsa ƒe nɔnɔme, encoding kple mamlɛtɔ nuwɔna xɔtutu.

Mɔfiame sia ɖe vovototo ŋutɔŋutɔ 10 siwo le RFID tsi kple ƒuƒu inlays dome me eye wòfia alesi converters, card wɔlawo, packaging dɔwɔƒewo, RFID integrators kple distributors ateŋu atia inlay nyuitɔ na woƒe wɔwɔ ƒe ɖoɖoa.

1. Vovototo Kae Le Inlay si Wotsɔ Tsi Tsi Kple Inlay Si Dry Dome?

Nukae Nye RFID Wet Inlay?

Zi geɖe la, RFID tsi si wotsɔ blaa nue nyea RFID chip si wobla ɖe antenna si le nusi tsɔa nu ŋu, si wotsɔa nulénu si sea nyaƒoɖeamenu kple nusi ɖea asi le eŋu kpena ɖe eŋu. Woate ŋu atsɔe ana na dɔ siwo wowɔna tẽe siwo sɔ alo woazãe abe akpa si wowu enu afã kple afã ene le RFID ƒe dzesidewo ƒe tɔtrɔ me.

Mele be woabu nusi wotsɔ ƒo tsii le eɖokui si be enye RFID-dzesi si woate ŋu ata si wowu enu o. Asitsatsa ƒe RFID dzesi geɖewo tsɔa pepa, PET, PP alo mo nu bubu aɖe kpena ɖe nusi wotsɔ blae la tame kpe ɖe nusi léa nu mamlɛtɔ, die-cut nɔnɔme, agbalẽtata kple agbalẽ xatsaxatsa ƒe nɔnɔme ŋu.

Nukae Nye RFID Dry Inlay?

RFID dry inlay me la , chip-and-antenna assembly si le PET alo carrier bubu si sɔ dzi si me adhesive mamlɛtɔ si sea nyaƒoɖeamenu kple release-liner xɔtuɖoɖo si wozãna na self-adhesive label mele o.

Zi geɖe la, wotiaa inlays ƒuƒuwo ne woatsɔ laminated, embedded, encapsulated alo atrɔ asi le RFID ƒe akpaa ŋu wòazu nu bubu abe PVC card, PET card, tikiti, asibide, molded component alo RFID label si wowɔ ɖe ɖoɖo nu.

2. Wet Inlay kple Dry Inlay Xɔtutu

3. Wet Inlay, Dry Inlay kple Finished RFID Label Menye Nu ɖeka ma ke o

Vodada siwo bɔ wu le afisi woakpɔe tsoe dometɔ ɖekae nye be woatsɔe be nusi wotsɔ ƒo tsii kple RFID ƒe dzeside si wowɔ vɔ la sɔ. Le dɔnyala bibiwo ƒe ŋkɔwo tɔtrɔ me la, zi geɖe la, wonyea nuwɔwɔ ƒe akpa vovovowo.

4. HF, NFC kple UHF Inlays Bia Mɔ̃ɖaŋununya Tiatia Vovovowo

'Wet' kple 'dry' ɖɔa ŋutilã me inlay xɔtutu. Womeɖea RFID ƒe ɣeyiɣi ƒe didime alo kadodo ƒe ɖoɖowɔɖi me o.

Wallis fifia eƒe susu le eƒe tsi/ƒuƒu inlay nuwɔna vevitɔwo ƒe hatsotso ɖe 13.56 MHz HF/NFC kple 860–960 MHz UHF RFID . LF RFID ateŋu anɔ transponder xɔtuɖaŋu bubuwo hã me, gake mele be woatsɔe le eɖokui si be ezãa tsi/ƒuƒu ƒe xɔtuɖaŋu si sɔ na HF kple UHF dɔwo o.

5. Chip kple Antenna Tiatia Vevie Wu 'Tsi alo Dry' Ðeka

Inlay eve siwo me tsi le ate ŋu awɔ dɔ le mɔ vovovowo nu ŋutɔ ne woƒe gotagome didime sɔ gɔ̃ hã. Nenema kee wòle le inlay ƒuƒu eve hã gome. RF dɔwɔwɔ nɔ te ɖe chip tiatia, antenna geometry, antenna nu, tuning kple mamlɛtɔ dɔwɔwɔ nɔnɔme dzi vevie.

HF kple NFC Chip Ƒome siwo bɔ

Le ɖoɖoa nu la, Wallis ateŋu adzro chip ƒomewo abe NTAG213, NTAG215, NTAG216, MIFARE Ultralight, MIFARE Classic, DESFire, ICODE, F08 kple HF/NFC tiatia bubu siwo sɔ me.

UHF Chip Ƒome siwo bɔ

UHF dɔwo ateŋu azã NXP UCODE, Impinj M730/M750 alo Monza ƒomewo, Alien Higgs kple chip bubu siwo wotia le EPC ŋkuɖodzinu, TID, zãla ƒe ŋkuɖodzinu, seselelãme kple nuxlẽla ƒe nɔnɔme si woɖo be woawɔ nu.

Aluminium kple Akɔbli Antennawo

Woate ŋu azã aluminum kple akɔbli antenna xɔtuɖaŋuwo siaa le alesi wowɔe nu. Ele be tiatia nyuitɔ nabu elektrikŋusẽ ƒe dɔwɔwɔ, ewɔwɔ ƒe ɖoɖo, antenna ƒe nɔnɔme, eƒe titrime, eƒe asitɔtrɔ, lamination ƒe dzoxɔxɔ kple gazazã ŋu.

6. Wet Inlays Nye Nyuitɔ Na Adhesive kple Label-Trɔtrɔ Dɔwɔwɔwo

Zi geɖe la, wolɔ̃a tsi inlays ne converter hiã self-adhesive RFID akpa si woate ŋu aƒo ƒu kple printable mo stock, die-cutting kple roll tɔtrɔ.

Asitsaƒewo kple Awudodo ƒe RFID Ŋkɔwo

Woate ŋu atrɔ UHF tsi inlays woazu awuwo, asitsaƒewo kple nudzraɖoƒewo ƒe dzesiwo hena nudzraɖoƒewo ƒe dzedzeme le wo ɖokui si kple nusiwo wotsɔ dea dzesi nu.

Dɔwɔɖoɖowo Kple Kakɛwo Dzi Kpɔkpɔ

Woate ŋu atsɔ adhesive RFID inlays ade kakɛ ƒe dzesiwo kple logistics labels me, nenye be wotia antenna la na kakɛa me nyawo, nuxlẽla ƒe ɖoɖowɔwɔ kple nuxexlẽ ƒe teƒe si wobia.

NFC Stickers kple Smart Packaging

Woateŋu atrɔ HF/NFC wet inlays wòazu NFC stickers siwo wowɔ vɔ hena adzɔnuwo ŋuti nyatakakawo, dijitaal nyatakakawo, dodoɖeŋgɔ, mɔɖegbalẽwo kple ɖaseɖiɖidɔwo ne wotia chip kple backend system si sɔ.

Atikewo Kple Lãmesẽnyawo Gbɔkpɔha ƒe Ŋkɔwo

RFID ateŋu ado alɔ dzesidede, nudzraɖoƒe kple kpeɖodzinana ƒe dɔwɔwɔ ƒe ɖoɖowo le lãmesẽnyawo kple atikewo ƒe bablawo me, gake ele be woaɖo kpe dzesidenu tutu si wowu, aŋenu, sedede ƒe nudidiwo kple dedienɔnɔ ƒe xɔtuɖaŋu dzi na dɔwɔwɔ si woɖo be woawɔ.

7. Dry Inlays Wotrɔ asi le na Embedding, Lamination kple Bubu Trɔtrɔ

Inlay ƒuƒu naa ablɔɖe geɖe wu dɔwɔƒe si le anyime be wòawɔ kaɖi mamlɛtɔ, tag alo nusi wotsɔ de eme la ƒe nɔnɔmetata elabena meva ɖo abe dzesidenu si sea nyaƒoɖeamenu ƒe xɔtutu si wowu enu ene o.

RFID ƒe Smart Cardwo

Woate ŋu atsɔ ƒuƒu inlays awɔ ɖeka kple PVC, PET, PETG alo PC kaɖi ƒe xɔtuɖoɖo siwo sɔ ne chip ƒe nɔƒe, antenna ƒe didime, kaɖi ƒe titrime bliboa, lamination ƒe dzoxɔxɔ kple punching ƒe ɖoɖo sɔ.

Mɔɖeɖe, Hamevinyenye kple Amedzrodzeƒe ƒe Kpekpeɖeŋugbalẽviwo

Woate ŋu atsɔ nusiwo me kadodo mele o ade mɔɖeɖe, amedzrodzeƒe, nuteƒewɔwɔ kple hamevinyenye ƒe agbalẽvi ƒe ŋutilãwo me ne chip kple protocol sɔ kple nuxlẽla ƒe ɖoɖo si woɖo be woawɔ.

Tiketiwo, Asibidewo kple Nusiwo Wotsɔ De Eme

Woateŋu atsɔ nu ƒuƒuwo hã awɔ ɖeka kple asibidewo, tikitiwo, akpa siwo wotsɔ aŋe wɔe, nubablɛwo ƒe xɔtuɖoɖowo kple transponder siwo wowɔ ɖe ɖoɖo nu afisi wòle be woakpɔ RFID ƒe akpaa ta le nusi wowɔ vɔ la me.

Fexexe ƒe Dɔbiagbalẽviwo Bia be Woawɔ Ðoɖo si Ŋu Ðaseɖigbalẽ Le

Mele be woaɖɔ RFID dry inlay si wozãna le wo ɖokui si be enye gadzraɖoƒe-kaɖi alo fexexe-kaɖi inlay o. Fexexe ƒe dɔbiagbalẽviwo bia chip siwo sɔ, kaɖi tutu si ŋu woɖo kpee, ame ŋutɔ ƒe tɔtrɔ, safuiwo dzikpɔkpɔ, fexexe ƒe ɖoɖo ƒe mɔɖeɖe kple fexexe ƒe ɖoɖo ƒe nudidi siwo sɔ.

8. RFID Xlẽƒe ƒe Agbɔsɔsɔme Nɔ te ɖe Dɔwɔɖoɖo Blibo la dzi

Wet inlay versus dry inlay ɖeɖeko mefiaa nuxexlẽ ƒe didime o. Ya fafɛ ƒe nudokpɔƒe ƒe emetsonu ate ŋu atrɔ ŋutɔ ne wotsɔ nusi wotsɔ blae la de kakɛ, aŋetu, plastik-go, kaɖi ƒe ŋutilã alo nu bubu aɖe me vɔ megbe.

Nu vevi aɖewoe nye:

• Chip ƒe seselelãme

• Antenna ƒe lolome kple eƒe tuning

• Nuxlẽla ƒe ƒomevi kple ŋusẽ si woɖo ɖa

• Nuxlẽla ƒe antenna ƒe polarization

• Tag ƒe mɔfiame

• Nutome UHF ƒe dzidziɖedzi zi gbɔ zi geɖe

• Nusiwo wowɔ kple nusiwo le eme

• Ga alo tsi si te ɖe eŋu

• Tag amewo ƒe agbɔsɔsɔ kple nuxexlẽ-nutome geometry

Standard RFID Inlays kple Ga ƒe Anyigbadzinuwo

Mele be woatsɔ RFID inlay si wozãna ɖaa la abla ɖe ga ŋu tẽ le eɖokui si o. Ga ate ŋu atrɔ asi le antenna ƒe dɔwɔwɔ ŋu alo atrɔe vevie. Zi geɖe la, ga zazãwo bia be woatsɔ tag, spacer, foam alo ferrite ƒe wɔwɔme si ŋu wotrɔ asi le etɔxɛe.

RFID Inlays le Aŋetuwo Kple Tsinuwo Ŋu

Tsi ateŋu atrɔ RF ƒe dɔwɔwɔ hã, vevietɔ na UHF ɖoɖowo. Eyata ele be woado dzesidenu si wowɔ le ya si me mekɔ o me kpɔ le aŋetu alo nugoe mamlɛtɔ si me wode tsii la dzi le teƒe si woɖoe ɖo ŋutɔŋutɔ.

9. Wet Inlay vs. Dry Inlay: B2B tsɔtsɔ sɔ kple wo nɔewo

10. Roll Trɔtrɔ, Encoding kple Quality Control Nya le Bulk Orders

Le dɔwɔƒewo ƒe RFID ƒeƒle gome la, chip ƒe ŋkɔ kple inlay ƒe didime nye nɔnɔmea ƒe akpa aɖe ko. Roll geometry kple tɔtrɔ ƒe nyatakakawo ate ŋu anya nenye be nusi wodzra la zɔna nyuie le nuƒlela ƒe nuwɔƒea.

Agbalẽxatsaxatsa Ŋuti Nyatakaka Veviwo

• Core ƒe didime

• Maximum roll gota didime

• Nyatakakadzraɖoƒe ƒe kekeme

• Inlay gbeɖiɖi ƒe kɔkɔme

• Dometsotso si le inlays dome

• Mɔfiame si le tsatsam

• Agbɔsɔsɔ si le agbalẽ xatsaxatsa ɖeka me

• Splice ƒe sewo

• Bad-tag ƒe dzesidede alo dzesidede

RFID Encoding kple Ame ŋutɔ ƒe Nɔnɔmewɔwɔ

Le mɔ̃ɖaŋununya si wotia nu la, woateŋu atsɔ inlays ana kple nyatakaka dɔwɔwɔ siwo dzi woda asi ɖo abe NDEF URL ŋɔŋlɔ, EPC encoding, serial-number assignment alo nyatakaka bubu siwo asisiwo ɖe.

Ele be woatsɔ chip ƒe kpɔɖeŋu ŋutɔŋutɔ agblɔ ŋkuɖodzinu ƒe ŋutete tsɔ wu be woayɔe abe xexeame katã ƒe NFC alo UHF ŋkuɖodzinu ƒe xexlẽdzesi ɖeka ene.

RF ƒe Nyonyome Dodokpɔ

Ele be elektrik kple RF ƒe nyonyome dzi kpɔkpɔ ƒe ɖoɖo siwo woɖe fia nalɔ ewɔwɔ le agbɔsɔsɔ gã me ɖe eme. Ele be nuƒlelawo nalɔ̃ ɖe defective-inlay identification, roll records, chip verification, encoding checks kple dɔwɔwɔ ƒe dzidzenu siwo sɔ dzi hafi awɔe.

Ale Si Nàtia RFID Inlays Tsi Kple Dry Dome

Tia Wet Inlay Ne Èhiã Label Trɔtrɔ

Zi geɖe la, tsi si wotsɔ dea nu me sɔ ne woatrɔ RFID ƒe akpaa wòazu nusi léna ɖe eɖokui ŋu alo atsɔe akpe ɖe eŋu tẽ le dɔwɔnu si sɔ me.

Tia Dry Inlay Ne Èhiã Embedding alo Lamination

Zi geɖe la, wolɔ̃a nu ƒuƒu si wotsɔ bla RFID ƒe akpaa ɖe kaɖi me, wotsɔe de nusi wowɔ me alo wotsɔe de xɔtuɖoɖo si wowɔ ɖe ɖoɖo nu me afisi ewɔla di be yeakpɔ nulénu mamlɛtɔ kple ametakpɔnu ƒe xɔtuɖoɖoa dzi le.

Tia RFID ƒe Ŋkɔgbalẽvi si Wu enu Ne Ele be Adzɔnua Nanɔ Dzadzraɖo Na Zazã Mamlɛtɔ

Ne dɔa bia be woatsɔ dzeside si woate ŋu ata alo ata do ŋgɔ si ƒe mo ƒe nu mamlɛtɔ, adhesive, die cut, encoding kple roll specification wu enu xoxo la, bia RFID ƒe dzesidenu si wogbugbɔ trɔ tsɔ wu be nàzã tsi vevi si wotsɔ ƒoe.

Adhesive Tiatia na RFID Tsi Inlays

Ele be woatu atike si woatsɔ alé nu ɖe ​​nu ŋu ƒe tiatia ɖe afisi wotsɔe ɖo mlɔeba kple afisi woawɔ dɔ le dzi. Pepa, ahuhɔ̃e, PP, PE, PET, kakɛ siwo wofa ɖe wo ŋu, avɔwo kple nusiwo wota ate ŋu abia be woatsɔ nulénu vovovo siwo sea nyaƒoɖeamenu gɔme.

Le dɔa nu la, nuƒlelawo ate ŋu ahiã nulénu tɔxɛ bubu si nɔa anyi ɖaa, si woate ŋu aɖe ɖa, si ƒe kpekpeme lolo, si me dzoxɔxɔ mele o alo atike tɔxɛ bubu. Ele be woado kpɔɖeŋuwo kpɔ be woƒe tack, peel ƒe ŋusẽ, edge lifting, dispensing kple nutome ƒe nɔnɔme le nusi wowɔ ŋutɔŋutɔ ƒe anyigba dzi hã.

Dry Inlay Lamination Bubuwo na Smart Cards

Ne wotsɔ nu ƒuƒu aɖe ƒo ɖe PVC, PETG alo PC kaɖi me la, ele be antenna kple chip la natsi agbe le dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi didi si lamination ƒe tsatsam la xɔna me.

Ele be kaɖiwɔlawo naɖo kpe edzi be:

• Kpekpeɖeŋugbalẽviwo ŋuti nyatakakawo

• Lamination ƒe dzoxɔxɔ kple nyaƒoɖeamenu

• Chip ƒe teƒe si wole

• Antenna ƒe nɔnɔme

• Kpekpeɖeŋugbalẽvi mamlɛtɔ ƒe titrime

• Agbalẽŋɔŋlɔ ƒe ŋkɔ ŋɔŋlɔ

• Kpekpeɖeŋugbalẽvi ƒoƒo ƒe nɔnɔme

• Dodokpɔ siwo hiã be woawɔ be woabɔbɔ wo alo woazã mɔ̃wo

Ele be woawu kpɔɖeŋu lamination kple finished-card RF dodokpɔ nu hafi woawɔe le agbɔsɔsɔ gã me.

Nyatakaka Kawoe Wòle Be Nuƒlelawo Nade RFID Inlay RFQ Me?

• Format: tsi inlay, ƒuƒu inlay alo RFID dzesi si wowu enu.

• Dɔwɔwɔ: asitsatsa, nuwo ɖoɖoɖa, smart card, nubablɛ, nunɔamesi, NFC, tikiti alo zazã bubu.

• Zi geɖe: HF/NFC 13.56 MHz alo UHF 860–960 MHz.

• Ðoɖowɔɖi: ISO/IEC 14443, ISO/IEC 15693, ISO/IEC 18000-63 alo ɖoɖo ƒe nudidi si wogblɔ.

• Chip: chip model tututu le afisi woɖe eme xoxo.

• Nuxlẽla: nuxlẽla, smartphone alo kaɖi-ɖoɖo ƒe kpɔɖeŋu.

• Tagged material: pepa, kakɛ, plastic, glass, avɔ, ga, tsi nugoe alo substrate bubu.

• Nuxexlẽ ƒe nudidi: taɖodzinu ƒe didime, nuxexlẽ ƒe mɔfiame, tag density kple read-zone ƒe nɔnɔmewo.

• Antenna ƒe didime: teƒe si woate ŋu akpɔ dzeside alo kaɖia ƒe lolome si sɔ gbɔ wu.

• Adhesive: si nɔa anyi ɖaa, si woate ŋu aɖe ɖa, freezer-grade alo nudidi bubu aɖe na tsi inlays.

• Encoding: NDEF, EPC, xexlẽdzesiwo alo nyatakaka bubuwo.

• Roll ƒe nɔnɔme: nuto, gbeɖiɖi, web kekeme, dzesidewo ɖe agbalẽ xatsaxatsa ɖesiaɖe kple winding mɔfiame.

• Agbɔsɔsɔ: kpɔɖeŋuwo, dodokpɔ ƒe sedede kple asitsatsa ƒe agbɔsɔsɔ si wokpɔ mɔ na.

• Teƒe si woɖo tae: ele vevie ŋutɔ na nutome UHF ƒe ɣeyiɣi ƒe didime tiatia.

RFID Inlay Mɔ̃ɖaŋununya ƒe Nɔnɔmewo

RFID inlay ƒe ŋgɔyiyi le susu hem yi antenna ƒe dɔwɔwɔ nyuie wu, nuwo zazã dzi ɖeɖe kpɔtɔ, tɔtrɔ ƒe dɔwɔwɔ nyuie wu kple kpekpeɖeŋu nana dɔ tɔxɛ geɖe wu dzi.

Antenna ƒe Nɔnɔmetata Siwo Ku Ðe Dɔwɔwɔ Ŋu Wu

Le esi teƒe be nuƒlelawo nazã antenna ɖeka si wozãna le mɔ vovovowo nu na dɔ ɖesiaɖe wɔwɔ la, wotiaa antenna ƒe nɔnɔme siwo sɔ nyuie na awuwo, kakɛwo, atsyɔ̃ɖonuwo, aŋetuwo, nunɔamesiwo kple nu tɔxɛ bubuwo geɖe wu.

Dual-Frequency RFID Dɔwɔɖoɖowo

Dɔ aɖewo bia NFC/HF ƒe kadodo kple UHF ƒe nudzraɖoƒe ƒe dɔwɔwɔ siaa. Esiawo bia be woatu xɔ si me wozãa ɣeyiɣi eve le si ŋu wotrɔ asi le etɔxɛe; NFC inlay si sɔ la mate ŋu axlẽ ko to UHF xlẽla dzi o, eye UHF inlay si sɔ mate ŋu awɔ nu kple NFC smartphone le eɖokui si o.

Lower-Material RFID Xɔtuɖoɖowo

Nudzralawo kple nusiwo trɔa asi le nu ŋu yi edzi le xɔtunu siwo le tsɛ wu eye wometsɔa nu suesuesuewo ƒoa nui kple esiwo wotsɔa dzesiwo ŋlɔnae la wɔm. Ele be woada nusiwo li tegbee kpɔ kokoko to tag xɔtutu bliboa, adhesive, face stock, liner kple end-of-life system zazã me tsɔ wu be woatsɔe be RFID inlay yeye ɖesiaɖe ateŋu agbugbɔ awɔ dɔ le eɖokui si.

Nusita B2B Nuƒlelawo kpɔa RFID Inlays Tsi kple Dry tso Wallis gbɔ

HF/NFC kple UHF ƒe Adzɔnuwo ƒe Tiatiawɔblɔɖe

Wallis naa 13.56 MHz HF/NFC kple 860–960 MHz UHF RFID inlays kple chip, antenna kple protocol tiatia siwo wotia le taɖodzinu ƒe dɔwɔwɔ nu.

Wet Inlay kple Dry Inlay ƒe Nɔnɔmewo

Nuƒlelawo ate ŋu akpɔ adhesive-backed wet inlays hena label tɔtrɔ alo dry inlays na card lamination, embedding kple custom product integration.

Antenna kple Inlay ƒe didime siwo wowɔ ɖe ɖoɖo nu

Woate ŋu adzro antenna ƒe didime, inlay ƒe lolome, carrier, adhesive xɔtutu kple final delivery format me le adzɔnuwo ƒe teƒe si li kple RF dɔwɔwɔ si hiã nu.

Roll, Sheet kple Encoding Kpekpeɖeŋu

Woate ŋu atrɔ asi le roll alo sheet formats, winding mɔfiame, chip ƒe kpeɖodzi, encoding, serial data, label ƒe tɔtrɔ kple packaging ƒe nudidiwo ŋu na B2B dɔ siwo sɔ.

Kpɔɖeŋu Dodokpɔ Hafi Woawɔ Wo Le Agbɔsɔsɔme Me

Ele be woada RFID ƒe dɔwɔwɔ kpɔ le nusi ŋu wode dzesii ŋutɔŋutɔ kple nuxlẽla ƒe ɖoɖoa dzi. Wallis kafui be woaɖo kpe RF ƒe dɔwɔwɔ, adhesive nuwɔna, encoding, tɔtrɔ alo card lamination dzi hafi woawɔ high-volume.

Nya Siwo Wobiaa Enuenu Tso RFID Inlays Tsi Kple Dry Ŋu

Vovototo vevitɔ kae le nusi wotsɔ ƒo tsii kple nusi wotsɔ ƒoa nu ƒuƒui dome?

Nusiwo wotsɔ blaa nu si me tsi le ƒe akpa aɖewoe nye nusi wotsɔna léa nu ɖe ​​nu ŋu si te ŋu sea nyaƒoɖeamenu kple nusi ɖea asi le eŋu. Dry inlay melɔa self-adhesive label construction mamlɛtɔ ɖe eme o eye zi geɖe la, wozãnɛ hena embedding, lamination alo tɔtrɔ yi ŋgɔe.

Ðe nusi wotsɔ ƒo tsii sɔ kple RFID ƒe dzesidea?

Menye nenema kokoko o. Zi geɖe la, RFID ƒe dzesidenu si wowu enu la lɔa mo ƒe nudzraɖoƒe si woate ŋu ata, nusi wotsɔna léa nu ɖe ​​eŋu koŋ, nɔnɔme mamlɛtɔ si wotso ku, agbalẽtata kple agbalẽ xatsaxatsa ƒe nɔnɔme tsɔ kpe ɖe RFID ƒe nusi wotsɔ de eme ŋu.

Ðe woate ŋu atrɔ nusi wotsɔ bla nu ƒuƒui wòazu nusi wotsɔ ƒo tsiia?

Ɛ̃. Woate ŋu atsɔ nulénu si sɔ si te ŋu sea nyaƒoɖeamenu kple nusi ɖea asi le eŋu akpe ɖe eŋu le tɔtrɔɣi be wòawɔ xɔ si me tsi le.

Kae nɔa anyi didina wu, inlay si me tsi le alo inlay ƒuƒu?

Le dzɔdzɔme nu la, nɔnɔme eveawo dometɔ aɖeke menɔa anyi didina wu le nɔnɔme ɖesiaɖe me o. Mlɔeba ƒe anyinɔnɔ nɔ te ɖe mo ƒe nu, adhesive, lamination, encapsulation, nugbɔ takpɔkpɔ kple dɔwɔwɔ ƒe nɔnɔme si wowɔ vɔ.

Ðe woate ŋu atsɔ nu ƒuƒu siwo wotsɔ ƒo ƒui la awɔ PVC alo PETG kaɖiwoa?

Ẽ, ne inlay carrier, chip ƒe nɔƒe, antenna ƒe ɖoɖo, lamination ƒe dzoxɔxɔ, card ƒe titrime kple punching ƒe ɖoɖo sɔ. Wokafui be woawɔ kpɔɖeŋu dodokpɔ si wowɔ kple agbalẽvi si wowu enu.

Frequency kae wozãna na NFC inlays?

NFC wɔa dɔ le 13.56 MHz dzi. Ele be woaɖo kpe chip si tututu, NFC Forum ƒomevi, ŋkuɖodzinu kple smartphone ƒe sɔsɔ dzi kokoko na dɔwɔwɔ si woɖo be woawɔ.

Frequency kae wozãna na UHF RFID inlays?

Passive UHF RFID wɔa dɔ zi geɖe le 860–960 MHz ƒe domedome. Frequency ranges ŋutɔŋutɔ siwo ŋu woɖe mɔ ɖo kple antenna tuning to vovo le nuto ɖesiaɖe me, eyata ele be woagblɔ asi si me woayi.

Ðe inlay ma ke ate ŋu awɔ dɔ kple NFC telefonwo kple UHF RFID xlẽlawoa?

NFC alo UHF inlay si nye frequency ɖeka si sɔ mate ŋu ado alɔ ɖoɖo eveawo siaa o. Wohiãa nusi wowɔ koŋ si me wozãa ɣeyiɣi eve le ne NFC/HF kple UHF ƒe dɔwɔwɔ siaa hiã.

Nuxexlẽ ƒe didime kae RFID inlay ate ŋu aɖo?

Xexeame katã ƒe nuxexlẽ ƒe xexlẽme aɖeke meli o. Zi geɖe la, NFC/HF wɔa dɔ le didiƒe kpui aɖe, gake UHF ya te ŋu ɖoa didiƒe kpui aɖe va ɖoa meta geɖe le nɔnɔme siwo sɔ me. Dɔwɔwɔ mamlɛtɔ nɔ te ɖe chip, antenna, nuxlẽla, tagged material, orientation kple nuto dzi.

Ðe woate ŋu atsɔ RFID inlay si wozãna ɖaa ade ga dzi tẽa?

Zi geɖe la, mele be woasusui be RFID inlays siwo wozãna ɖaa la wɔa dɔ nyuie ne woda wo ɖe ga dzi tẽ o. Zi geɖe la, ga zazãwo bia be woatsɔ dzesi si wowɔ etɔxɛe si me dometsotso, foam alo ferrite ƒe wɔwɔme si sɔ le.

Ðe woate ŋu azã RFID tsilénu ɖe ​​aŋetu siwo me tsi le ŋua?

Ẽ, gake tsi ate ŋu akpɔ ŋusẽ ɖe RF ƒe dɔwɔwɔ dzi. Do antenna, dzeside ƒe nɔƒe kple nuxlẽla ƒe ɖoɖo si wodo ɖa la kpɔ le nugoe mamlɛtɔ si me yɔ fũu la dzi hafi nàwɔe.

Ðe Wallis ate ŋu awɔ NFC URL alo UHF EPC nyatakakawo ƒe kɔpi?

Dɔ siwo sɔ ateŋu anye NDEF URL ŋɔŋlɔ, EPC ƒe asixɔxɔwo, xexlẽdzesiwo kple nuŋɔŋlɔ ƒe nudidi bubu siwo dzi woda asi ɖo. Ele be nuƒlelawo nana nyatakakawo ƒe ɖoɖo, ɖoɖo si nu wole kple kpeɖodzinana ƒe se siwo sɔ pɛpɛpɛ.

Nyatakaka kawoe hiã ne wole RFID inlays biam?

Na inlay format, frequency, protocol, chip, nuxlẽla, tagged nu, didi nuxexlẽ ƒe didime, antenna didime, adhesive nudidiwo, encoding, agbalẽ xatsaxatsa alo agbalẽ ƒe nɔnɔme, agbɔsɔsɔme kple yiyi asi.

Ðe wòle be woado kpɔɖeŋuwo kpɔ hafi woawɔ RFID inlay ƒe nudɔdɔ le agbɔsɔsɔ gã mea?

Ɛ̃. Do kpɔɖeŋuwo kpɔ to nuxlẽla si woɖo be woawɔ, dɔwɔwɔ ƒe anyigba, nusi wowɔ ƒe emenyawo, mɔfiame, aŋenu ƒe ɖoɖo kple tɔtrɔ alo lamination ƒe mɔnu zazã hafi ada asi ɖe asitsatsa ƒe wɔwɔme dzi.

Tia RFID Inlays si wotu ɖe Adzɔnu Mamlɛa dzi, Menye Adhesive la Ko O

Vovototo bɔbɔetɔ kekeake si le RFID-nulénu siwo me tsi le kple esiwo le ƒuƒuie domee nye nusi wotsɔ léa nu ɖe ​​nu ŋu mamlɛtɔ, gake nyametsotso si woawɔ le afisi woakpɔe tsoe ŋu si nye eŋutinunyala bia nyatakaka geɖe wu.

Ele be nuƒlelawo nada RFID ƒe ɣeyiɣi ƒe didime, ɖoɖowɔɖi, chip, antenna ƒe nɔnɔme, nuxexlẽ ƒe nɔnɔme, dɔwɔwɔ ƒe nu, adhesive, agbalẽ xatsaxatsa ƒe nɔnɔme, lamination ƒe ɖoɖo, encoding kple nyonyome-dzikpɔkpɔ ƒe nudidiwo kpɔ hafi atia inlay mamlɛtɔ.

Wallis naa RFID inlays tsi kple ƒuƒu na HF/NFC kple UHF dɔwɔwɔwo, kpakple antenna ƒe didime siwo wowɔ ɖe ɖoɖo nu, agbalẽ xatsaxatsa alo agbalẽ ƒe nɔnɔmewo, encoding kple integration support na label converters, card manufacturers kple RFID solution providers.