RFID Wet Inlay vs Dry Inlay : 10 Hakilila jɔnjɔnw & sanni gafe

Wet Inlay vs. Dry Inlay : Hakilila jɔnjɔn 10 RFID Sannikɛlaw ye

RFID inlays ɲiginnenw ani inlays jalenw ye fɛn kolomaw ye minnu bɛ kɛ ka smart labels, NFC stickers, RFID kartiw, tikitiw, pakew taamasiyɛnw, nafolo labels ani RFID fɛnw dilan minnu bɛ don a kɔnɔ. Hali n’a y’a sɔrɔ RFID puce ni antenne bɛ u fila bɛɛ la, u bɛ dilan cogoya wɛrɛw la, wa u dabɔra jiginɛ jiginni kɛcogo wɛrɛw kama.

B2B sannikɛlaw fɛ, ka sugandili kɛ fɛn ɲiginnen ni fɛn jalen cɛ, o man kan ka da a kan dɔrɔn ni nɛgɛ bɛ a la. Sugandili ɲuman fana bɛ bɔ frequency, protocol, chip family, antenne dimensions, tagged material, target read range, adhesive requirement, lamination process, roll format, encoding ani final product construction.

Nin gafe in bɛ danfara waleyali 10 ɲɛfɔ RFID inlays ɲiginnenw ni inlays jalenw cɛ ani k’a jira cogo min na convertisseurs, karti dilannikɛlaw, pakew dilannikɛlaw, RFID integrateurs ani distributeurs bɛ se ka inlays ɲuman sugandi u ka production processus kama.

1. Danfara jumɛn bɛ Inlay ɲiginnen ni Inlay jalen cɛ ?

RFID Jiginnen Inlay ye mun ye ?

{ RFID inlay jilama bɛ kɛ a ka c’a la RFID puce ye min sirilen don antɛni la min bɛ tabaga dɔ kan, ka fara ɲɔgɔn kan ni nɔrɔlan ye min bɛ se ka degun ani min bɛ bɔ a la. A bɛ se ka di poroze tilennenw ma minnu bɛ bɛn ɲɔgɔn ma walima ka baara kɛ ni a ye i n’a fɔ yɔrɔ tilancɛ dafalen RFID labeli jiginni na.

Inlay ɲiginnen man kan ka jate a yɛrɛma iko RFID label dafalen min bɛ se ka sɛbɛn. Jagokɛla RFID labeli caman bɛ papiye wɛrɛ fara a kan, PET , PP walima ɲɛdafɛn wɛrɛ min bɛ kɛ fɛn dilannen sanfɛ ka fara nɔrɔ laban kan, ni die-cut cogoya, sɛbɛnni ani roll specification ye.

RFID Jalen Inlay ye mun ye ?

{ RFID inlay jalen dɔ kɔnɔ, chip-and-antenna assembly bɛ sɔrɔ PET kan walima tabaga bɛnnen wɛrɛ kan, ni a ma kɛ ni degun-sɛgɛsɛgɛli nɔrɔli laban ye ani release-liner jɔli ye min bɛ kɛ ka yɛrɛ-nɔgɔlan taamasiyɛn kɛ.

A ka c’a la, fɛn jalenw bɛ sugandi ni RFID yɔrɔ bɛna lamini, ka don a kɔnɔ, ka don a kɔnɔ walima ka wuli ka kɛ fɛn wɛrɛ ye i n’a fɔ PVC karti, PET karti, tikiti, bolokɔni, yɔrɔ mɔlen walima RFID taamasiyɛn min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

2. Jiginnen Inlay ani Jalen Inlay jɔli

3. Jiginnen Inlay , Jalen Inlay ani Finished RFID Label tɛ fɛn kelen ye

Sourcing fili minnu ka teli ka kɛ, olu dɔ ye k’a miiri ko inlay ɲiginnen ni RFID label dafalen ye kelen ye. Baarakɛlaw ka labeli jiginni na, tuma caman na, u bɛ kɛ fɛn dilanni dakunw ye minnu tɛ kelen ye.

4. HF , NFC ani UHF Inlay s bɛ fɛɛrɛtigɛ sugandili danfaralenw wajibiya

'Wet' ani 'dry' bɛ farikolo inlay jɔli ɲɛfɔ. U tɛ RFID frequency walima communication protocole ɲɛfɔ.

Wallis b’ a ka fɛn dilannenw fanba sinsin sisan 13,56 MHz HF / NFC ani 860–960 MHz UHF RFID kan . LF RFID bɛ se ka kɛ fana transponder jɔli wɛrɛw la, nka a man kan ka miiri a yɛrɛma ko a bɛ baara kɛ ni fɛn dilannenw jɔcogo jɔnjɔn kelen ye min bɛ di HF ani UHF porozɛw ma.

5. Puce ni Antenna sugandili nafa ka bon ka tɛmɛ 'Wet or Dry' dɔrɔn kan

Inlays jilama fila bɛ se ka baara kɛ cogo wɛrɛ la kosɛbɛ hali n’u kɛnɛma hakɛw ye kelen ye. O cogo kelen de bɛ kɛ ni inlay jalen fila ye. RF baarakɛcogo bɛ bɔ kosɛbɛ puce sugandilen na, antɛni jateminɛcogo, antɛni minɛnw, tuning ani baarakɛcogo laban sigida la.

HF ani NFC Chip Denbaya minnu ka ca

Ka kɛɲɛ ni sistɛmu ye, Wallis bɛ se ka baro kɛ puce denbayaw kan i n’a fɔ NTAG213, NTAG215, NTAG216, MIFARE Ultralight, MIFARE Classic, DESFire, ICODE, F08 ani HF / NFC sugandili wɛrɛw minnu bɛ bɛn ɲɔgɔn ma.

UHF Chip Denbaya minnu bɛ sɔrɔ tuma caman

UHF porozɛw bɛ se ka baara kɛ ni NXP UCODE, Impinj M730/M750 walima Monza denbayaw ye, Alien Higgs ani puce wɛrɛw sugandilenw ka kɛɲɛ ni E PC hakilijagabɔ, TID, baarakɛla hakilijagabɔ, sensitivite ani kalanbaga sigida laɲininen ye.

Aluminiyɔmu ni Kupu Antɛniw

Aluminiyɔmu ni nɛgɛ antɛni jɔli fila bɛɛ bɛ se ka kɛ ka kɛɲɛ ni fɛn dilannen dilanni ye. Sugandili ɲuman ka kan ka jateminɛ kɛ kuran baarakɛcogo, a dilanni taabolo, antɛni jateminɛcogo, a bonya, a sɛgɛsɛgɛli, a lamini funteni ani a musaka.

6. Inlay s ɲiginnenw ka fisa ni nɔrɔli ni labeli caman tigɛli baarakɛcogo ye

A ka c’a la, fɛn ɲiginnenw ka fisa ni fɛn caman tigɛlikɛla mago bɛ a yɛrɛ nɔrɔlen RFID yɔrɔ la min bɛ se ka fara ɲɔgɔn kan ni ɲɛda stock ye min bɛ se ka sɛbɛn, die-cutting ani roll converting.

Finifeere ni finiw RFID Labels

UHF inlays ɲiginnenw bɛ se ka wuli ka kɛ finiw, feerekɛyɔrɔw ani fɛnmarayɔrɔw taamasiyɛnw ye walasa ka stock yecogo otomatiki ye ani ka fɛnw dɔn.

Logistiki ani Kartonw nɔfɛtaama

Adhesive RFID inlays bɛ se ka don kartɔn sɛbɛnniw ni logistiki taamasiyɛnw kɔnɔ, ni antɛni sugandira kartɔn kɔnɔkow kama, kalanbaga sigicogo ani kalan yɔrɔ wajibiyalenw kama.

NFC Stickers ani Smart Packaging

HF / NFC inlays ɲiginnenw bɛ se ka wuli ka kɛ NFC stika dafalenw ye walasa ka fɛn dilannenw kunnafoniw sɔrɔ, nizɛri kɔnɔkow, laseliw, garantiw ani dantigɛli baarakɛcogo ni puce ni backend system bɛnnin dɔ sugandira.

Furakɛcogo ni kɛnɛyako sɛbɛnw

RFID bɛ se ka dɛmɛ don dɔnni, fɛnw jatebɔ ani dantigɛli baarakɛcogo la kɛnɛyako ni furakɛli foroko kɔnɔ, nka labeli jɔli dafalen, nɔrɔli, sariyaw wajibiyalenw ani lakana jɔcogo ka kan ka tiɲɛ baarakɛcogo laɲininen na.

7. Inlay s jalenw Dabɔra ka don u kɔnɔ, ka u lamini ani ka u sɛmɛntiya ka taa a fɛ

Inlay jalen bɛ hɔrɔnyaba di jiginɛ dilabaga ma ka karti laban, tag walima fɛn min bɛ don a kɔnɔ, o dilan bawo a tɛ se i n’a fɔ labeli jɔli dafalen min bɛ se ka degun.

RFID Carte à puce s. Bamako, Mali

Inlay jalenw bɛ se ka don PVC , PET , PETG walima PC kariti jɔcogo bɛnnenw na ni puce jɔyɔrɔ, antɛni hakɛ, karti janya bɛɛ lajɛlen, lamination funteni ani punching layout bɛ bɛn.

Sɔrɔ, tɔndenw ani lotɛli kartiw

Inlays minnu tɛ ɲɔgɔn sɔrɔ, olu bɛ se ka don dondaw, lotɛli, kantigiya ani tɔndenw ka karti farikolow kɔnɔ ni puce ni protocole bɛ bɛn kalanbaga sitɛmu laɲininen ma.

Tickets, Wristbands ani Fɛn minnu bɛ don a kɔnɔ

Inlay jalenw fana bɛ se ka don bolokɔniw kɔnɔ, tikitiw, yɔrɔw dilannenw, pakew jɔcogo ani transponders customs yɔrɔ minnu na RFID yɔrɔ ka kan ka lakana fɛn dilannen kɔnɔ.

Sarako ɲininiw bɛ Sistɛmu Sɛbɛnni de wajibiya

RFID jalen inlay jenɛriki man kan ka ɲɛfɔ a yɛrɛma i n’a fɔ banki-karti walima sara-karti inlay. Sarako ɲininiw bɛ puwɛnti lakananen bɛnnenw de wajibiya, karti jɔli seereyaw, mɔgɔ yɛrɛ ta, kilisi ɲɛnabɔli, wari bɔbaga ka sɔnni ani wari saracogo-sɛnɛcogo wajibiyalen minnu bɛ tali kɛ o la.

8. RFID Kalan hakɛ bɛ bɔ Sistɛmu dafalen na

Inlay ɲiginnen ni inlay jalen dɔrɔn tɛ kalan hakɛ dantigɛ. Laboratowari min bɛ fiɲɛ hɔrɔnyalen sɔrɔ, o bɛ se ka Changé kosɛbɛ ni inlay sirilen don kartɔn, buteli, plastiki minɛn, karti farikolo walima fɛn wɛrɛ la.

Fɛn nafamaw dɔw ye:

• Puce (puce) sɛgɛsɛgɛli

• Antɛni hakɛ ni a tun bɛ kɛ cogo min na

• Karamɔgɔ suguya ani fanga min bɛ ci

• Kalanbaga ka antɛni polarize

• Tag orientation (Tag orientation) ye

• Sigida UHF ka caya

• Fɛn dilannenw kɔnɔfɛnw ani u kɔnɔkow

• Nɛgɛ walima jilama min bɛ a kɛrɛfɛ

• Tag jamanadenw ni kalan-yɔrɔ jateminɛ

Standard RFID Inlay s ani Nɛgɛdagayɔrɔw

RFID inlay standard man kan ka siri a yɛrɛma nɛgɛ la. Nɛgɛ bɛ se ka antɛni baarakɛcogo detune walima ka fɛn caman Changer. Nɛgɛ kan, a ka c’a la, a bɛ kɛ ni tag, spacer, foam walima ferrite structure ye min dilannen don kɛrɛnkɛrɛnnenya la.

RFID Inlay s kan Buteliw ni Jimafɛnw kan

Ji fana bɛ se ka RF baarakɛcogo Changer, kɛrɛnkɛrɛnnenya la UHF sitɛmuw kama. O la, sɛbɛn min dilannen don fiɲɛ gansan na, o ka kan ka sɛgɛsɛgɛ buteli walima minɛn falen laban kan, a bilayɔrɔ yɛrɛ la.

9. Ji Inlay ni jalen Inlay : B2B Sanga

10. Roll Converting, Encoding ani Quality Control ko minnu bɛ kɛ ka caya komandiw kɔnɔ

Industri RFID sanni kama, puce tɔgɔ ni inlay hakɛw ye ɲɛfɔli yɔrɔ dɔ dɔrɔn ye. Roll geometry ani converting details bɛ se k’a dɔn ni fɛn dilannen bɛ baara kɛ ka ɲɛ sannikɛla ka fɛn dilanni sira kan.

Roll Specifications nafamaw

• Core (kɔnɔna) cɛmancɛ

• Maximum roll kɛnɛma cɛmancɛ

• Web ka bonya

• Inlay bɔgɔdaga

• Gap (yɔrɔ) min bɛ inlays ni ɲɔgɔn cɛ

• Winding sira

• Hakɛ min bɛ kɛ rollo kelen na

• Splice sariyaw

• Bad-tag identification walima taamasiyɛn kɛli

RFID Kodeli ni mɔgɔya

Ka kɛɲɛ ni fɛɛrɛ sugandilen ye, inlays bɛ se ka dilan ni kunnafonidilanw baarakɛcogo ye minnu dabɔra i n’a fɔ NDEF URL sɛbɛnni, E PC kodɔn, seriyali-nimɔrɔ dicogo walima kunnafoni wɛrɛw minnu ɲɛfɔlen don kiliyanw fɛ.

Hakilila seko ka kan ka ɲɛfɔ ni puce model yɛrɛ ye sanni ka fɔ iko diɲɛ bɛɛ NFC walima UHF hakilijagabɔ jateden kelen.

RF ka jogoɲini sɛgɛsɛgɛli

Kuran ni RF jogoɲini taabolo ɲɛfɔlenw ka kan ka kɛ ni fɛn caman dilanni ye. Sannikɛlaw ka kan ka bɛnkan sɔrɔ fɛn tiɲɛnenw dɔnni kan, roll records, puce verification, encoding checks ani baarakɛcogo sariyaw minnu bɛ tali kɛ o la sani u ka dilan.

Sugandili kɛcogo ɲiginnen ni jalen cɛ RFID Inlay s

Sugandili kɛ Wet Inlay Ni i mago bɛ Label jiginni na

A ka c’a la, inlay jilama bɛnnen don ni RFID yɔrɔ bɛna wuli ka kɛ a yɛrɛ nɔrɔlen ye walima ni a bɛ nɔrɔ a yɛrɛ la baarakɛcogo la min bɛ bɛn.

Aw bɛ Inlay jalen dɔ sugandi Ni aw mago bɛ Embedding walima Lamination la

A ka c’a la, inlay jalen ka fisa ni RFID yɔrɔ bɛna lamini karti kɔnɔ, ka don fɛn dɔ kɔnɔ walima ka don ladamu jɔli la, yɔrɔ min na a dilabaga b’a fɛ ka nɔrɔ laban ni lakanani jɔcogo kɔlɔsi.

RFID Label dafalen sugandi Ni fɛn dilannen ka kan ka labɛn baara laban kama

Ni porozɛ in bɛ sɛbɛn dɔ wajibiya min bɛ se ka sɛbɛn walima min bɛ se ka sɛbɛn ka kɔn, ni ɲɛda labanfɛn ye, nɔrɔlan, die tigɛlen, kodeli ani roll specification dafara kaban, aw bɛ RFID taamasiyɛn caman tigɛli ɲini sanni ka basic wet inlay.

Adhesive Sugandili ka ɲɛsin RFID Jilama Inlay s

Nɛgɛ sugandili ka kan ka da a kɛcogo laban kan ani a baarakɛyɔrɔ. Paperboard, gilasi, PP , PE, PET , kartɔn minnu datugulen don, finiw ani yɔrɔw pentalenw bɛ se ka kɛ sababu ye ka nɔrɔcogo wɛrɛw de wajibiya minnu bɛ se ka degun.

Ka kɛɲɛ ni poroze ye, sannikɛlaw mago bɛ se ka kɛ nɔrɔlan ye min bɛ to senna, min bɛ se ka bɔ, min bɛ se ka sɔgɔ kosɛbɛ, min funteni ka dɔgɔn walima min bɛ se ka nɔrɔ kɛrɛnkɛrɛnnen wɛrɛ kɛ. Sɛgɛsɛgɛli ka kan ka sɛgɛsɛgɛ ni u tack, u ɲɛkisɛ fanga, u dawolo kɔrɔtacogo, u dicogo ani u lamini na, u bɛ u yɛrɛ jira fɛn dilannen yɔrɔ yɛrɛ la.

Jalen Inlay Lamini jateminɛw ka ɲɛsin Carte à puce s

Ni inlay jalen dɔ laminina ka kɛ PVC , PETG walima PC karti ye, antɛni ni puce ka kan ka kisi lamini cycle funteni, tansiyɔn ani kuntaala ma.

Karti dilannikɛlaw ka kan k’a jira ko:

• Karti kɔnɔfɛnw

• Lamini funteni ni tansiyɔn

• Puce sigiyɔrɔ

• Antɛni jɔyɔrɔ

• Karti laban janya

• Sɛbɛnw sɛbɛnni

• Karti punching jɔyɔrɔ

• Kɔrɔta walima masin sɛgɛsɛgɛli minnu ka kan ka kɛ

Lamini misali ni RF sɛgɛsɛgɛli min bɛ kɛ ni karti dafalen ye, o ka kan ka ban sani a ka kɛ ni hakɛ caman ye.

Sannikɛlaw ka kan ka kunnafoni jumɛnw don RFID Inlay RFQ kɔnɔ?

• Format: inlay ɲiginnen, inlay jalen walima RFID label dafalen.

• Baarakɛcogo: feereli, fɛnw ladonni, karti hakilitigi, pakew, nafolo, NFC , tikiti walima baara wɛrɛ.

• Fɛrɛnkan: HF / NFC 13,56 MHz walima UHF 860–960 MHz.

• Protocole: ISO /IEC 14443, ISO /IEC 15693, ISO /IEC 18000-63 walima sistɛmu wajibiyalen kofɔlen.

• Puce: chip model tigitigi yɔrɔ min ɲɛfɔra kaban.

• Karamɔgɔ: kalanden, smartfon walima karti-sistema modɛli.

• Fɛn min bɛ taamasiyɛn kɛ : papiye, kartɔn, plastiki, gilasi, fini, nɛgɛ, jilama minɛn walima fɛn wɛrɛ.

• Kalan wajibiyalen : laɲini yɔrɔjan, kalan sira, tag density ani kalan-yɔrɔ cogoyaw.

• Antɛni hakɛw: labeli walima karti yɔrɔ min bɛ se ka sɔrɔ, o hakɛ cayalenba.

• Nɔrɔlan : a bɛ to senna, a bɛ se ka bɔ, a bɛ se ka kɛ konfirɛzi la walima a wajibiyalen don fɛn wɛrɛ ye min bɛ kɛ ni fɛn ɲiginnenw ye.

• Kodeli: NDEF, E PC , seriyali nimɔrɔw walima kunnafoni wɛrɛw.

• Rollo ɲɛfɔli: core, pitch, web width, labels per roll ani winding direction.

• Hakɛ : misaliw, piloti komandi ani jago hakɛ makɔnɔnen.

• Taamayɔrɔ : a nafa ka bon kɛrɛnkɛrɛnnenya la marabolo UHF frequency sugandili la.

RFID Inlay Fɛnɲɛnɛmako taabolo

RFID inlay yiriwali bɛ sinsin ka taa a fɛ antɛni baarakɛcogo ɲuman na, ka fɛnw baaracogo dɔgɔya, ka fɛn caman tigɛli kɛcogo ɲɛ ani ka baarakɛminɛn kɛrɛnkɛrɛnnenw dɛmɛ.

Antɛni dilanni minnu bɛ kɛ ka ɲɛsin baarakɛcogo kɛrɛnkɛrɛnnenw ma

Sani u ka baara kɛ ni antɛni jenɛriki kelen ye baarakɛcogo bɛɛ la, sannikɛlaw bɛ ka dɔ fara antɛni dilanni kan minnu bɛ bɛn finiw, kartɔnw, ɲɛgɛnw, buteliw, nafolo ani fɛn kɛrɛnkɛrɛnnen wɛrɛw ma.

Dual-Frequency RFID Jateblaw

Porozɛ dɔw bɛ NFC / HF jɛɲɔgɔnya ni UHF inventory baarakɛcogo fila bɛɛ de wajibiya. Olu bɛ ɲini kɛrɛnkɛrɛnnenya la, fɛn fila-fila jɔli la; NFC inlay normal tɛ se ka kalan dɔrɔn UHF kalanbaga fɛ, ani inlay normal UHF tɛ se ka jɛɲɔgɔnya kɛ a yɛrɛma ni NFC smartfon ye.

Jiginni-Materiel RFID Jɛkuluw

Fɛn dilanbagaw ni fɛn caman tigɛlikɛlaw bɛ ka taa a fɛ ka fɛn finmanw ni fɛn dɔgɔmanw inlay ni label constructions labɛn. Sigida sabatili ka kan ka jateminɛ hali bi ni taamasiyɛn jɔli dafalen ye, nɔrɔlan, ɲɛda stock, finimugu ani ɲɛnamaya laban sira sanni k’a miiri ko RFID inlay kura bɛɛ bɛ se ka segin ka kɛ a yɛrɛma.

Mun na B2B Sannikɛlaw bɛ ji ni jalen RFID Inlay s sɔrɔ Wallis fɛ

HF / NFC ani UHF Fɛn dilannenw sugandili

Wallis bɛ 13,56 MHz HF / NFC ani 860–960 MHz UHF RFID inlays dilan ni chip, antenna ani protocol sugandilenw ye minnu sugandira ka kɛɲɛ ni laɲini baarakɛcogo ye.

Wet Inlay ani Dry Inlay Formats

Sannikɛlaw bɛ se ka fɛnw sɔrɔ minnu bɛ kɛ ni nɛgɛ ye minnu bɛ kɛ ni nɛgɛ ye walasa ka labeli caman tigɛli kɛ walima ka fɛn jalenw sɔrɔ walasa ka karti lamini, ka u don a kɔnɔ ani ka fɛnw fara ɲɔgɔn kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Antɛni ladamu ani Inlay Dimensions

Antɛni hakɛw, inlay hakɛ, carrier, adhesive construction ani final delivery format bɛ se ka baro kɛ ka kɛɲɛ ni fɛn dilannen yɔrɔ ye min bɛ sɔrɔ ani RF baarakɛcogo wajibiyalen.

Roll, Sheet ani Encoding Dɛmɛ

Roll walima sheet cogoyaw, winding direction, chip verification, encoding, serial data, label conversion ani packaging wajibiyalenw bɛ se ka kɛ ka kɛɲɛ ni B2B porozɛw ye minnu bɛ bɛn ɲɔgɔn ma.

Sample Testing Sani ka Mass Production kɛ

RFID baarakɛcogo ka kan ka jateminɛ fɛn taamasiyɛnlen yɛrɛ kan ani kalanbaga sitɛmu kan. Wallis bɛ ladilikan di ko RF baarakɛcogo, nɔrɔcogo, kodeli, fɛn caman tigɛli walima karti laminini ka kan ka dafa sani a ka kɛ ni hakɛ caman ye.

Ɲininkali minnu bɛ kɛ tuma caman na ji ni jalen kan RFID Inlay s

Danfaraba jumɛn bɛ inlay ɲiginnen ni inlay jalen cɛ?

Inlay ɲiginnen dɔ kɔnɔ, nɔrɔ min bɛ se ka degun ani min bɛ bɔ a la. Inlay jalen tɛ yɛrɛ-nɔgɔlan laban jɔli la, wa a ka c’a la, a bɛ kɛ ka a don, ka a lamini walima ka a caman tigɛli kɛ.

Yala inlay jilama ni RFID label ye kelen ye wa?

A tɛ kɛ wajibi ye. RFID labeli dafalen bɛ kɛ ni ɲɛda stock ye min bɛ se ka sɛbɛn, a kɛcogo kɛrɛnkɛrɛnnen nɔrɔlen, die-cut cogoya laban, sɛbɛnni ani roll specification ka fara RFID inlay kan.

Yala inlay jalen bɛ se ka wuli ka kɛ inlay ɲiginnen ye wa?

Awɔ. Nɛgɛ min bɛ se ka degun ani min bɛ bɔ a la, o bɛnnen bɛ se ka fara a kan fɛn caman tigɛli waati walasa ka fɛn dɔ dilan min bɛ kɛ ni ji ye.

Juman min bɛ mɛn ka tɛmɛ, inlay ɲiginnen walima inlay jalen?

O cogoya fila si tɛ mɛn ka tɛmɛ o kan cogoya bɛɛ la. Muɲuli laban bɛ bɔ ɲɛdafɛnw na, a nɔrɔlan, a laminicogo, a datugucogo, a dakun lakanani ani a baarakɛcogo la min dilannen don.

Yala inlay jalenw bɛ se ka lamini ka kɛ PVC walima PETG kartiw ye wa?

Ɔwɔ, ni inlay carrier, chip position, antenne layout, lamination temperature, card thickness ani punching layout bɛ bɛn ɲɔgɔn ma. A ka ɲi ka karti dafalen sɛgɛsɛgɛli kɛ.

Frequency jumɛn bɛ kɛ NFC inlays kama?

NFC bɛ baara kɛ ni 13,56 MHz ye. Puce tigitigi, NFC Foroba suguya, hakilijagabɔ ani smartfon bɛnkan ka kan ka dafa hali bi baarakɛminɛn laɲininen kama.

Frequency jumɛn bɛ kɛ UHF RFID inlays kama?

Passif UHF RFID bɛ baara kɛ tuma caman na 860–960 MHz kɔnɔ. Frequency ranges autorisés lakikaw ani antenne tuning bɛ danfara ka kɛɲɛ ni maraw ye, o la, taayɔrɔ sugu ka kan ka fɔ.

Yala o inlay kelen bɛ se ka baara kɛ ni NFC telefɔniw ni UHF RFID kalanbagaw ye wa?

NFC walima UHF inlay min bɛ kɛ ni fɛn kelen ye, o tɛ se ka o sitɛmu fila bɛɛ dɛmɛ. Fɛn min dilannen don kɛrɛnkɛrɛnnenya la, min bɛ kɛ ni fɛn fila ye, o de wajibiyalen don ni NFC / HF ani UHF baarakɛcogo fila bɛɛ mago bɛ u la.

RFID inlay bɛ se ka kalan hakɛ jumɛn sɔrɔ?

Duniya bɛɛ ka kalan-yɔrɔ jate tɛ yen. NFC / HF bɛ baara kɛ cogoya la yɔrɔ surun na, k’a sɔrɔ UHF bɛ se ka bɔ yɔrɔ surun na ka se mɛtɛrɛ caman ma cogo bɛnnen na. Baara laban bɛ bɔ puce, antenne, reader, tagged material, orientation ani sigida la.

Yala RFID inlay standard bɛ se ka bila nɛgɛ kan k’a ɲɛsin a ma wa?

Standard RFID inlays caman man kan ka jate ko u bɛ baara kɛ ka ɲɛ ni u bilara nɛgɛ kan k’a ɲɛsin u yɛrɛ ma. Nɛgɛ kan, a ka c’a la, a bɛ kɛ ni taamasiyɛn kɛrɛnkɛrɛnnen ye min dilannen don ni yɔrɔjan, fomu walima feriti jɔcogo bɛnnen ye.

Yala RFID inlays ɲiginnenw bɛ se ka kɛ buteliw kan minnu kɔnɔ ji bɛ sɔrɔ wa?

Ɔwɔ, nka ji bɛ se ka nɔ bila RF baarakɛcogo la. Antɛni sugandilen, labeli jɔyɔrɔ ani kalanbaga sigicogo kɔrɔbɔ minɛn falen laban kan sani a ka dilan.

Yala Wallis bɛ se ka NFC URLw walima UHF E PC kunnafoniw kodɔn wa?

Porozɛ minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka kɛ NDEF URL sɛbɛnni, E PC nafaw, seriyali nimɔrɔw ani kodɔn wajibiyalen wɛrɛw ye minnu dabɔra. Sannikɛlaw ka kan ka kunnafonidilanw sigicogo tigitigi, u sigicogo ani u sɛgɛsɛgɛli sariyaw di.

Kunnafoni jumɛnw de ka kan ka kɛ ni RFID inlays komandi ye?

Aw bɛ inlay cogoya, frequency, protocol, chip, reader, tagged material, kalan yɔrɔ ɲininen, antenne hakɛ, adhesive wajibiyalenw, encoding, roll or sheet specification, hakɛ ani destination suguya di.

Yala misaliw ka kan ka sɛgɛsɛgɛ ka kɔn bulk RFID inlay order ɲɛ wa?

Awɔ. Aw bɛ misaliw kɔrɔbɔ ni kalanbaga laɲininen ye, ni u kɛcogo ye, ni fɛn dilannenw kɔnɔfɛnw ye, ni u ɲɛsincogo ye, ni u nɔrɔcogo ye ani ni fɛn caman tigɛli walima u laminicogo ye sani aw ka sɔn jagokɛcogo ma.

RFID Inlay s sugandi Ka da fɛn laban kan, a kana kɛ nɔrɔli dɔrɔn ye

Danfara nɔgɔman min bɛ RFID inlays ɲiginnenw ni jalenw cɛ, o ye nɔrɔli laban ye, nka baarakɛlaw ka sɔrɔko latigɛ bɛ kunnafoni caman wɛrɛw de wajibiya.

Sannikɛlaw ka kan ka RFID frequency, protocol, chip, antenne design, kalan sigida, application material, adhesive, roll format, lamination process, encoding ani quality-control wajibiyalenw jateminɛ sani u ka inlay laban sugandi.

Wallis bɛ RFID inlays ɲiginnenw ni jalenw di HF / NFC ani UHF baarakɛminɛnw kama, ka fara antɛni hakɛw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, roll walima sheet cogoyaw, kodɔn ani jɛkafɔ dɛmɛni label converters, karti dilannikɛlaw ani RFID ɲɛnabɔbagaw ma.