Custom PMMA Filayen Jagorar Hasken Acrylic tare da Dige-dige Laser

Custom PMMA Filayen Jagorar Hasken Acrylic tare da Dige-dige Laser

Wallis ƙera al'ada PMMA acrylic haske jagoran faranti (LGPs) tare da madaidaicin ɗigon Laser don akwatunan hasken LED, nunin talla, shelves dillalai, hasken rufi, allon menu da sauran aikace-aikace masu haske. Tsarin ɗigo na gani yana jujjuya hasken da ke shigowa daga gefen panel kuma yana rarraba shi a saman da aka haskaka don haske, daidaitaccen fitarwa.

Akwai shi a cikin kauri na 3-12 mm , ma'auni na al'ada da ƙa'idodin gani guda ɗaya ko biyu, kowane PMMA LGP za a iya daidaita shi da girman panel, matsayi na LED, gefen shigar da haske da aikace-aikacen da ake bukata. Har ila yau Wallis yana goyan bayan ɗigon Laser, V-cutting, CNC yankan, hakowa, goge baki, tsaftacewa da fakitin fitarwa don OEM da odar aikin.

Nemi Bayanin LGP na Musamman

PMMA Ƙayyadaddun Farantin Jagorar Haske

Yadda Farantin Jagoran Hasken Laser PMMA ke Aiki

1. Hasken LED yana Shiga Ta Wurin da aka goge

LED tube ko modules an ajiye su kusa da daya ko fiye goge gefuna panel. Daidaitaccen daidaitawa tsakanin tushen hasken LED da gefen PMMA yana inganta haɗin haske kuma yana rage asarar gani da ake iya gujewa.

2. Haske yana Tafiya Ta PMMA Panel

Ƙungiyar PMMA tana jagorantar hasken da ke shigowa a samansa. Kaurin panel, girma, yanayin gefen, fitin LED da adadin gefuna-in shigar da haske duk suna tasiri yadda hasken ke tafiya da yadda tsarin ƙarshe ke aiki.

3. Tsarin Dot yana Fitar da Haske daidai gwargwado

Digon Laser da aka ƙera na kwamfuta yana katse hanyar haske na ciki da ɓangarorin hasken da aka sarrafa kai tsaye suna fita ta saman panel. Za a iya daidaita girman digo, zurfin da tazara gwargwadon nisa daga tushen LED don rage ganuwa masu haske, wurare masu duhu da bambance-bambancen haske na tsakiya-zuwa-baki.

Mabuɗin Fa'idodi don Akwatin Hasken LED da Ayyukan Nuni

Hasken Surface Uniform

Ƙayyadaddun ɗigon Laser na ƙayyadaddun aikin yana taimakawa rarraba hasken gefen gabaɗayan cikakken panel maimakon mayar da hankali ga haske kusa da filayen LED. Wannan yana goyan bayan ingantaccen sakamako na gani don zane-zane, alamu, shelves da hasken ado na ado.

Slim Edge-Lit Construction

Saboda an shigar da LEDs tare da gefen panel, wani PMMA LGP zai iya tallafawa akwatunan haske na bakin ciki, ƙaramin sigina, ɗakunan haske da ƙananan tsarin nuni inda hasken baya mai zurfi na al'ada bai dace ba.

Sassaukan gani na gani da Keɓance Injiniya

Wallis na iya keɓance tsayin panel, faɗi, kauri, siffar, matsayi, ramuka, ramuka, gefuna na shigar haske, ɗigon Laser, jagorar fitarwa da jiyya na gefen bisa ga zanen mai siye da ƙirar taro.

Dace da Samfura da Umarnin Samfura

Tare da mafi ƙarancin tsari na yanki ɗaya, abokan ciniki na iya kimanta samfuri ta amfani da LEDs da aka yi niyya, mai nuna haske, mai watsawa, firam da yanayin aiki kafin tabbatar da babban tsari na samarwa.

Aikace-aikace na PMMA Acrylic Light Guide Plates

• Akwatunan hasken talla na LED da firam ɗin hotuna masu haske

• Fitilar shiryayye na siyarwa, kayan nunin nuni da katunan nuni

• Allolin menu, alamun gano hanya da zane mai haske

• Rufi panel da ciki ado lighting

• Akwatunan haske masana'anta na SEG da nunin nuni

• Kayan sana'a, kayan daki masu haske da fasalin gine-gine

Dots Laser vs. Layin Yankan V

Hanyar sarrafawa mafi dacewa ya dogara da cikakken tsarin haske. Wallis na iya yin bitar zanenku, tsarin LED da yankin da aka haska kafin bada shawarar ɗigon Laser, layukan yankan V ko haɗin takamaiman aikin.

Zaɓuɓɓukan Keɓancewa don OEM da Masu Siyan Aikin

• Girma da kauri: Tsawon panel na al'ada, nisa da zaɓuɓɓukan kauri na 3-12 mm.

• Siffar panel: Rectangles, murabba'ai da CNC -yanke kwalaye na al'ada dangane da zane.

• Ƙimar shigar da haske: Ƙaƙƙarfan ƙira ɗaya, ƙira biyu ko ƙira mai yawa bisa ga shimfidar gani.

• Hanyar fitarwa: Fuskokin gani mai gefe guda ko mai gefe biyu.

• Dot ko ƙirar layi: Ƙirar ɗigon Laser na musamman ko ƙirar yankan V.

• Sarrafa injina: CNC yankan, hakowa, ramummuka, notches, goge baki da ƙare baki.

• Shiryawa: Marufi masu kariya, kwali da kwalayen katako don jigilar kayayyaki zuwa fitarwa.

Tattauna Tsarin Tsarin Ku na Musamman

Abin da za a Samar don Ingantacciyar Maganar LGP

Don taƙaita lokacin nazarin aikin injiniya da haɓaka daidaiton zance, da fatan za a samar da yawancin cikakkun bayanai masu zuwa gwargwadon iko:

• Tsawon panel ɗin da aka gama, faɗi, kauri da yawa

• PDF, DWG ko DXF zane tare da ramuka, ramummuka, notches da haƙuri

• Nau'in LED, Fitilar LED, zafin launi da ikon aiki

• Matsayin LED da adadin gefuna masu shigar da haske

• Bukatar haske mai gefe ɗaya ko mai gefe biyu

• Reflector, diffuser, firam zurfin da tsarin watsar da zafi

• Hasken manufa, daidaitaccen gani da wurin kallo mai haske

• Gefen goge baki, fim ɗin kariya, tsaftacewa da buƙatun marufi

Gwajin Samfura Kafin Samar da Jama'a

Haske na ƙarshe da daidaituwa sun dogara da cikakken haɗin gani maimakon farantin PMMA kaɗai. Fitowar LED, Nisan LED-zuwa-baki, goge baki, girman panel, mai nuna haske, mai watsawa, matsa lamba na firam, yanayin zafi da saitunan wuta duk na iya rinjayar sakamakon.

Don aikin al'ada, Wallis yana ba da shawarar kimanta samfuri tare da tushen LED ɗin abokin ciniki da abubuwan haɗin haɗin gwiwa. Ana iya amfani da sakamakon gwaji don tabbatar da ƙirar ɗigo da cikakkun bayanan ƙirƙira kafin samarwa da yawa.

Kerawa, Marufi da Tallafin Fitarwa

Wallis yana ba da tallafi na tsayawa ɗaya don ayyukan farantin haske na al'ada PMMA , gami da yankan kayan, sarrafa ɗigon Laser, V-yanke, CNC ƙirƙira, goge baki, tsaftacewa, dubawa, fakitin kariya da shirye-shiryen jigilar kaya.

Me yasa Zaba Wallis a matsayin Mai Bayar da PMMA LGP ɗinku?

Taimakon Tsarin Na'ura na Musamman

Za'a iya daidaita yawan ɗigon Laser bisa ga girman panel, wurin LED, jagorar shigarwar haske da wurin da ake buƙata mai haske maimakon yin amfani da tsari guda ɗaya ga kowane aiki.

Haɗin Ƙarfin Ƙirƙirar Ƙira

Masu saye za su iya haɗa kayan samar da kayayyaki, sarrafa ƙirar gani, CNC siffata, hakowa, goge goge da tattara kayan fitarwa ta hanyar mai kaya guda ɗaya, rage handoffs tsakanin masu sarrafawa daban.

Samfura-Friendly MOQ

Mafi ƙarancin oda guda ɗaya yana goyan bayan kimanta aikin, haɓaka samfuri da gwajin gani kafin masu siye su ƙaddamar da ƙimar samarwa.

Sadarwar Ayyukan B2B

Wallis yana aiki tare da masana'antun hasken wuta, masu yin alamar, masu ƙirƙira nuni, ƴan kwangila da ƙungiyoyin siyayya waɗanda ke buƙatar girman al'ada, zane, maimaita samarwa da isar da fitarwa zuwa fitarwa.

Aika Zanenku don Bita

Shahararrun abokan ciniki a duk faɗin duniya

Ayyukan kamfani na yau da kullun

Tambayoyin da ake yawan yi

Menene farantin jagorar hasken acrylic PMMA ?

A PMMA farantin jagorar haske wani panel na acrylic na gani ne wanda ke karɓar haske daga LEDs da aka ajiye tare da gefuna ɗaya ko fiye kuma yana rarraba wannan hasken a saman babban haske mai haske ta hanyar ɗigon Laser, layukan da aka zana ko wasu sifofi na hakar.

Ta yaya LGP-dot Laser ke rage duhu?

Yawan yawa da tazara na ɗigon Laser sun bambanta a ko'ina cikin panel don fitar da ƙarin ko žasa haske a wurare daban-daban. Tsarin da aka ƙera daidai yana ramawa don canjin nisa daga tushen LED kuma yana haɓaka rarraba haske.

Menene bambanci tsakanin wani LGP da takardar diffuser?

LGP yana jigilarwa kuma yana fitar da haske daga LEDs masu ɗorewa. Ana sanya takardar mai watsawa a gaban LGP don sauƙaƙa hasken da ke fitowa, rage alamun dige-dige da inganta yanayin kallo na ƙarshe.

Shin PMMA farantin jagorar haske yana buƙatar mai haske?

Yawancin na'urori masu haske masu fuska ɗaya suna amfani da na'urar ta baya don karkatar da hasken ƙasa zuwa saman kallo da rage asarar gani. Yakamata a gwada na'urar firikwensin ƙarshe da saitin mai watsawa a matsayin wani ɓangare na cikakken taron.

Wadanne kauri ke samuwa?

Wallis yana samar da faranti na haske PMMA a cikin kauri daga 3 mm zuwa 12 mm. Kauri da aka ba da shawarar ya dogara da girman panel, kunshin LED, nisan tafiya mai haske, ƙirar tsari da sararin shigarwa.

Shin Wallis zai iya keɓance yawan ɗigon Laser?

Ee. Za a iya ƙirƙira yawan dige bisa ga ƙaƙƙarfan girman panel, PMMA kauri, Matsayin LED, Fitilar LED, adadin gefuna na shigarwa, jagorar fitarwa da yanki mai haske.

Za a iya yanke LGP, ko CNC ko goge?

Ee. Wallis na iya samar da yankan CNC , ramuka, ramummuka, notches, goge baki da sauran ƙirƙira bisa ga zanen abokin ciniki da buƙatun aikin.

Menene mafi ƙarancin oda?

Matsakaicin adadin tsari yanki ɗaya ne, yana ba da damar yin odar samfuri don dacewa, gwajin gani da taro kafin samarwa da yawa.

Menene lokacin jagoran samarwa da aka saba?

Ana shirya samfuran yawanci a cikin kusan kwanaki 3-7 na aiki bayan biya da tabbacin fasaha. Samar da yawan jama'a gabaɗaya yana ɗaukar kusan makonni 2-5, ya danganta da adadin tsari, rikitaccen aiki da jadawalin samarwa da aka tabbatar.

Wadanne fayiloli zan aika don zance na al'ada?

Da fatan za a aika da zane na PDF, DWG ko DXF tare da kauri, yawa, tsarin LED, gefuna na shigar da haske, jagorar fitarwa, bayanan mai nuni da diffuser, jiyya na gefe da buƙatun marufi.