|
Led haske panel
Wallis
| Abu: | |
|---|---|
| Girma: | |
| fa'ida: | |
| Yawan: | |
Wallis yana ƙera ɗigon laser na al'ada PMMA acrylic haske jagorar faranti (LGPs) don hasken LED mai haske, akwatunan hasken talla, nunin dillali, ɗakunan haske, alamomi, hasken rufi da ayyukan hasken gine-gine.
An tsara madaidaicin ƙirar ɗigo na Laser a saman PMMA don fitar da hasken da ke tafiya ta cikin acrylic panel kuma a rarraba shi a cikin yankin da ake buƙata. Girman digo, yawa da tazara za'a iya daidaita su bisa ga girman panel, matsayin LED, jagorar shigarwar haske da buƙatun aikace-aikacen.
Wallis yana goyan bayan kauri na 3-12 mm, ma'auni na musamman, sarrafa dige laser, yankan V, CNC yankan, hakowa, goge baki da saitin gani guda ɗaya ko mai fuska biyu don samfuri da yawan ayyukan LGP.
Ƙididdiga masu zuwa sun shafi kewayon LGP na Wallis Laser-dot acrylic na yanzu. Ya kamata a daidaita ƙirar gani ta ƙarshe zuwa madaidaicin madaidaicin panel, tsarin LED da saman da ake buƙatar haske.
| Sunan samfur | Dot Laser PMMA Acrylic Light Guide Plate | Alamar | Wallis |
| Kayan abu | Na gani PMMA Acrylic | Kauri | 3-12 mm |
| Girman Kayan Raw | 1220 × 2440 mm | Girman Ƙarshe | Keɓance don Abubuwan Buƙatun Aiki |
| Canjin Haske | Har zuwa 93% don Ƙayyadaddun Kayan Kayan PMMA | Gudanarwa | Dots Laser / Layin Yankan V |
| Kayayyakin gani | Side-Side/Gani Biyu | MOQ | 1 yanki |
| Kirkirar Al'ada | CNC Yanke / Hakowa / Gyaran Gefe / Sarrafa Siffar | Marufi | Katin / Akwatin katako |
| Amfani na Farko | Lighting / Signage / Nuni / Ado | Wurin Asalin | Shanghai, China |
LED tubes ko modules an ajiye su kusa da daya ko fiye goge gefuna PMMA . Kyakkyawan daidaitawa tsakanin filaye mai fitar da LED da gefen acrylic yana taimakawa inganta haɗin haske a cikin panel.
Da zarar haske ya shiga cikin acrylic, yana tafiya ta cikin panel. Kaurin panel, girma, ingancin gefuna da adadin fitattun gefuna suna tasiri yadda ingantaccen haske zai iya tafiya ta cikin LGP.
Microdots da aka zana Laser suna katse hanyar haske na ciki kuma suna fitar da sassan haske mai sarrafawa ta fuskar panel. Tsarin na iya zama ci gaba mai yawa nesa da tushen LED don rama asarar haske a fadin farantin.
A yawancin taruka masu haske mai gefe guda, LGP yana aiki tare da na'urar ta baya da mai watsawa ta gaba. Waɗannan abubuwan da aka gyara suna taimakawa wajen karkatar da hasken da ba a yi amfani da su ba kuma suna santsin fuskar da ta haskaka. Ya kamata a kimanta tsarin gani na ƙarshe a matsayin cikakken tsari maimakon ta LGP kaɗai.
Daban-daban Acrylic LGP Processing
Ƙa'idar Aiki ta LGP-Lit
Bai kamata a zaɓi farantin jagorar haske kawai ta hanyar kaurin acrylic ba. Don ingantacciyar daidaituwa, yakamata a tsara ƙirar gani a kusa da cikakkiyar daidaitawar hasken LED.
Manyan bangarori suna buƙatar haske don tafiya mai nisa mafi girma. Don haka tsayin panel da faɗin yana tasiri ɗigo-yawan gradient, adadin gefuna na shigarwa da kauri mai dacewa PMMA .
Wallis yana ba da kauri na 3-12 mm LGP. Kauri mai dacewa ya dogara da girman panel, tsayin kunshin LED, buƙatun tsari da sararin shigarwa akwai.
Tazarar LED da nisa tsakanin fakitin LED guda ɗaya na iya shafar makaɗa masu haske kusa da gefen panel. Samar da ɗigon LED da aka yi niyya ko ƙayyadaddun ƙayyadaddun ƙayyadaddun module yana taimakawa ƙirar LGP ta dace da ainihin tushen haske.
LGP na iya karɓar haske daga gefuna ɗaya, biyu ko da yawa dangane da aikin. Manyan fanatoci na iya amfana daga ƙarin gefuna na shigarwa lokacin da gefen LED guda ɗaya ba zai iya samar da nisan tafiya da ake buƙata ko daidaito ba.
Ya kamata a daidaita tazarar digo da yawa gwargwadon nisa daga LEDs. Takamammen gradient na aikin yana taimakawa daidaita wurare masu haske kusa da tushen haske tare da wurare masu nisa daga gefen haske.
Ya kamata gefen shigar-hasken ya zama mai tsabta kuma mai gogewa don tallafawa ingantaccen haɗin kai tsakanin LEDs da panel PMMA . Yanayin gefen yana da mahimmanci musamman don jagorar haske mai nisa.
Wallis na iya tallafawa saitin gani mai gefe ɗaya ko mai gefe biyu. Ya kamata a zaɓi shimfidar haske, mai watsawa da shimfidar ɗigo bisa ga abin da aka yi niyya don fitar da haske.
Matrix da aka ƙera da kyau na Laser-dot yana taimakawa rarraba haske a gefen panel maimakon maida hankali haske kusa da fitilar LED. Wannan yana rage bambance-bambancen haske na bayyane-zuwa-baki kuma yana goyan bayan haske mai tsabta.
Saboda LEDs suna matsayi tare da gefen panel maimakon kai tsaye a bayan cikakken haske, LGP na iya tallafawa akwatunan haske, filayen nuni da taron hasken gine-gine.
Za a iya gyaggyara ɗigon Laser a wurare daban-daban na faranti ɗaya don rama ƙarancin haske da biyan takamaiman buƙatun haskaka aikin.
Ƙayyadadden ƙayyadadden abu PMMA yana ba da watsa haske har zuwa 93%. Wannan darajar tana nufin kayan acrylic kanta; Hasken ƙãrewar tsarin da ingancin gani shima ya dogara da LEDs, ƙirar dige-dige, girma, mai haskakawa da daidaitawar diffuser.
Girman panel, siffofi, ramuka, ramummuka, notches da gefuna masu gogewa ana iya keɓance su bisa ga zanen abokin ciniki da buƙatun taro.
Wallis yana goyan bayan duka Laser-dot da V-yanke aiki. Tsarin hakar da ya dace ya dogara da lissafi na panel, jagorar haske da tasirin gani da ake so.
| Kwatanta | Laser Dot Processing | V-Cutting Processing |
|---|---|---|
| Tsarin gani | Microdot Matrix | Madaidaicin Layukan Siffar V ko Tsagi |
| Sarrafa Tsarin | Dot Density na iya bambanta a ko'ina cikin Panel | Hanyar Layi da Tazara Za'a Iya Keɓancewa |
| Yawan Amfani | General Edge-Lit Light Kwalaye, Nuni da Panel | Ayyukan da ke Buƙatar Hankali ko Tsare-tsare na Layi |
| Zabi | Dangane da Girman Panel, Shirye-shiryen LED da Makasudin Uniformity | Dangane da Jagoran gani da Tsarin Injini |
Laser-dot LGPs na iya rarraba hasken LED da aka ɗora gefen bayan fastoci, zane-zane, allon menu da nunin talla yayin da suke goyan bayan tsarin akwatin haske siriri.
Za'a iya haɗa LGPs na acrylic na musamman a cikin ɗakunan ajiya, shawagi, kabad da kayan masarufi inda ake buƙatar haske mai bakin ciki.
Fitilar jagorar haske mai haskakawa na iya tallafawa allunan menu masu haske, alamun bayanai da zanen jagora a gidajen abinci, wuraren cin kasuwa da wuraren jama'a.
PMMA Ana iya shigar da LGPs cikin filayen siraren rufi, filayen bangon haske, kayan daki da sauran taruka masu haske na gine-gine.
Babban tsarin nuni na iya amfani da LGPs na musamman inda aka kera girman aikin, jeri na LED da daidaitawar gani don takamaiman firam.
Hakanan za'a iya ƙididdige faranti na jagorar haske na musamman don samfuran nuni na musamman, dakunan sarrafawa da sauran aikace-aikacen da ke buƙatar sarrafa haske daga farantin gani mai haske.
Aikace-aikacen Hasken Kasuwanci
Aikace-aikacen Hasken Gine-gine
Girman injina suna da mahimmanci kamar aikin gani lokacin da LGP dole ne ya dace da firam ɗin akwatin haske ko taron LED.
Za'a iya sarrafa tsayin da aka gama da nisa bisa ga zane-zane na abokin ciniki a cikin ma'auni na ɗanyen kayan aiki da ƙarfin masana'antu.
CNC Ana iya amfani da mashin ɗin don samar da keɓaɓɓen bayanan martaba na waje, ramummuka, wuraren hutu da sauran fasalolin injina da ake buƙata ta taron hasken wuta.
Ana iya haɗa ramukan hawa da sauran buɗe ido bisa ga zane-zane, muddin ba su tsoma baki tare da mahimman wuraren jagorar haske ba.
Za a iya goge gefuna masu shigar da haske don inganta haɗin kai, yayin da ba za a iya sarrafa gefuna ba bisa ga ƙirar ƙarshe da ƙirar firam.
Tare da MOQ da aka jera na yanki ɗaya, ana iya ƙididdige samfuri tare da raƙuman LED da aka yi niyya, mai nuni, mai watsawa da firam ɗin inji kafin a tabbatar da adadin yawan samarwa.
Farantin jagorar haske shine bangaren PMMA na gani a cikin tsarin hasken wuta mai haske. Bai kamata a bi da shi ta atomatik azaman cikakken hasken panel LED ba.
Cikakken taron hasken wuta na iya buƙatar tube ko kayayyaki na LED, kayan gani, zanen gado, firam ɗin aluminum, wayoyi, samar da wutar lantarki da abubuwan hawa. Idan aikin ku yana buƙatar fiye da na'urar acrylic LGP, ƙididdige cikakkun buƙatun taro lokacin neman zance.
Don al'ada Laser-dot LGP, samar da gani da kuma inji bayanai tare taimaka rage maimaita bita da kuma inganta aikin kimantawa.
Adadin da ake buƙata
Tsawon da aka gama da nisa
Da ake buƙata PMMA kauri
CAD ko zane mai girma
LED tsiri ko LED module bayani dalla-dalla
Fitilar LED da girman fakitin
Lamba da wuri na gefuna na shigar haske
Fitowar haske mai gefe ɗaya ko mai gefe biyu
Dige-dige Laser ko zaɓin yankan V
Ramuka da ake buƙata, ramummuka ko siffofi na al'ada
Tsarin Reflector da diffuser, idan an sani
Farantin LGP bare ko cikakken buƙatun taron haske
Aikace-aikacen manufa da yanayin shigarwa
Za a iya keɓance ƙirar ɗigon Laser bisa ga girman panel, jeri LED, jagorar shigarwar haske da wurin da ake buƙata.
Zaɓuɓɓukan kauri da yawa PMMA suna ba da damar LGP ya daidaita zuwa fakitin LED daban-daban, girman panel da buƙatun tsari.
CNC yankan, hakowa, sifofi na musamman da goge baki ana iya haɗa su tare da ƙirar ɗigon gani bisa ga zanen abokin ciniki.
MOQ da aka jera na yanki ɗaya yana ba masu siye damar kimanta samfuran da aka keɓance kafin tabbatar da buƙatun samarwa mafi girma.
Wallis yana goyan bayan ayyukan LGP da aka keɓance don masana'antun hasken LED, masana'antun akwatin haske, kamfanonin sa hannu, masu samar da nuni, kamfanonin dillalai da sauran masu siye na kasuwanci.
Ayyukan LGP na al'ada na iya haɗawa da yankan PMMA , sarrafa dige-dige, V-yanke, CNC ƙirƙira, goge baki, tsaftacewa, dubawa da fakitin fitarwa na kariya bisa ga ƙayyadaddun tsari da aka tabbatar.
A PMMA farantin jagorar haske wani panel na acrylic na gani ne wanda aka ƙera don karɓar hasken LED daga gefuna ɗaya ko fiye da rarraba wannan hasken a saman babban saman ta ɗigon Laser, zane-zane ko wasu sifofi masu cire haske.
Ee. A cikin wannan nau'in samfurin, LGP yana nufin Farantin Jagorar Haske. 'LPG' a cikin taken samfurin haske na acrylic yawanci jujjuyawar haruffa ne kuma yakamata a gyara shi zuwa LGP don daidaiton fasaha da kuma dacewa da bincike.
Haske yana tafiya ta cikin PMMA daga gefen LED. Dige-dige Laser suna katse hasken jagora kuma suna fitar da sassan da aka sarrafa ta saman panel. Daidaita yawan ɗigo a fadin farantin yana taimakawa ramawa don rage ƙarfin haske nesa da LEDs.
Wallis ya lissafa kauri daga 3 mm zuwa 12 mm don wannan samfurin. Kauri mai dacewa ya dogara da girman panel, girman fakitin LED, nisan tafiya mai haske da buƙatun tsarin.
A'a. Ƙimar da aka jera tana nufin watsa haske na ƙayyadadden abu mai tsabta PMMA . Ƙarshen ingantaccen tsarin da haske shima ya dogara da haɗaɗɗiyar LED, girman panel, ƙirar dige-dige, masu haskakawa, diffusers da sauran asarar gani.
Ee. Za'a iya daidaita yawan dige zuwa girman LGP da aka gama, PMMA kauri, Matsayin LED, fitin LED, adadin haske mai haske da jagora mai fitar da haske.
Ayyukan Laser-dot yana amfani da matrix na microdots don fitar da haske a ko'ina cikin panel, yayin da V-yanke yana amfani da tsagi na madaidaiciya. Zaɓin ya dogara da lissafin panel, jagorar haske da tasirin gani da ake so.
Yawancin tsarin haske mai gefe guda ɗaya suna amfani da mai nuna haske a bayan LGP don karkatar da haske zuwa saman kallo. Aikace-aikace masu fuska biyu masu fayyace na iya amfani da tsarin gani na daban, don haka ya kamata a kimanta cikakken taron gwargwadon abin da aka yi niyya.
Santsi, gefen shigar haske mai haske yana taimakawa ma'aurata hasken LED cikin acrylic da inganci. Ƙunƙarar gefuna ko lalacewa na iya ƙara watsewar da ba a so da asarar gani.
Ee. Dangane da girman panel da buƙatun haske, ana iya sanya LEDs akan gefuna biyu ko fiye. Ya kamata a tsara shimfidar digo-digo Laser a kusa da zaɓaɓɓen saitin shigar-gefen.
Ee. CNC yankan, hakowa, bayanan martaba na musamman, ramummuka da sarrafa gefuna ana iya tattauna su bisa ga zanen abokin ciniki da buƙatun gani na panel.
Babban samfurin da aka kwatanta anan shine farantin jagorar hasken PMMA da aka sarrafa. Idan ana buƙatar LEDs, fitattun zanen gado, zanen gadon yatsa, firam, wayoyi ko wasu abubuwan haɗin gwiwa, jera su daban don a iya tabbatar da cikakken ikon taron.
MOQ ɗin da aka jera na yanzu yanki ɗaya ne, yana bawa masu siye damar kimanta samfurin da aka keɓance kafin ƙaddamar da oda mafi girma.
Bayanan samfurin na yanzu yana lissafin kimanin kwanakin aiki 3-7 don samfurori da kusan makonni 2-5 don samar da taro, dangane da yawa da keɓancewa. Ya kamata a sake tabbatar da lokacin jagora na ƙarshe tare da ambaton aikin.
Da fatan za a samar da adadi, ƙaƙƙarfan girma, kauri, zane na CAD, ƙirar LED ko ƙayyadaddun tsiri, Fitilar LED, adadin hasken gefuna, jagorar fitarwa, dige Laser ko zaɓin yanke V da kowane ramuka, ramummuka ko wasu buƙatun injin.
Neman al'ada Laser dot acrylic haske jagora farantin, PMMA LGP ko gefen-lit LED haske jagora panel ? Aika Wallis zanen panel ɗinku, kauri, ƙayyadaddun LED, daidaitaccen haske da yawa don kimanta gani da masana'anta.
