Aluminium Fram LED Baklayt Panel Kastom Saiz in Ay Luminous

Kastom Aluminium Fram LED Baklayt Panɛl wit PMMA Layt Gayd Plɛt

Wallis aluminiɔm freym LED baklayt panɛl na wan slim, ay-yunifɔm laytin sɔlvishɔn we dɛn mek fɔ advatayz layt bɔks, mɛnyu bod, rital displei, logo panɛl, ɛgzibishin displei, ilɛminɛt grafik ɛn kɔstɔmayz kɔmɛshɔnal baklayt prɔjek.

Di panɛl jɔyn wan aluminiɔm freym, optik PMMA layt gayd plet, prɛsishɔn lɛsa dɔt patɛn ɛn ed-mawnt LED layt fɔ sheb layt akɔdin to di panɛl sɔfays. Standart A0–A4 ɛn B1–B3 fɔmat dɛn de, we dɛn kin prodyuz kɔstɔm dimɛnshɔn dɛn akɔdin to di prɔjek drɔin dɛn.

Standart panɛl tiknes opshɔn dɛn inklud 7 mm, 8 mm, 9 mm ɛn 10 mm . Di layt opshɔn dɛn we de na 3000K wam wayt, 6000K kul wayt ɛn RGB. Fɔ big panɛl dɛn, dɛn kin arenj LED dɛn along ɔl tu di lɔng sayd dɛn fɔ mek di braytnɛs distribyushɔn bɛtɛ ɛn fɔ mek i gɛt wanwɔd.

Fɔ B2B projɛkt, Wallis de sɔpɔt laser dot dizayn, CNC prɔsesin, LED maching, kɔstɔm freym dimɛnshɔn, panɛl asɛmbli, waya ɛn ɛkspɔt pak akɔdin to JPG, PDF, DXF ɔ DWG drɔin.

Aluminium Frame LED Baklayt Panel na wan glans

Notis: Faynal vɔlɔt, LED pawa, luminans, CRI, ilɛktrik kɔnɛkshɔn, dimming we, freym profayl ɛn instɔleshɔn strɔkchɔ fɔ kɔnfɔm akɔdin to di panɛl saiz we yu dɔn pik ɛn di prɔjek spɛsifikɛshɔn.

Aw LED Baklayt Panɛl De Wok?

Wan LED baklayt panɛl de yuz LED dɛn we dɛn put along di edj fɔ wan transparent layt gayd plet. Layt de go insay di PMMA panɛl frɔm di sayd dɛn ɛn i de ridayrɛkt am to di say we gɛt layt bay wan optik dɔt patɛn we dɛn tek tɛm mek.

Di density ɛn distribyushɔn fɔ laser dɔt dɛn kin ajɔst akɔdin to panɛl saiz, LED pozishɔn ɛn target braytnɛs. Dis de ɛp fɔ kɔmpɛns di layt intɛnsity we de ridyus smɔl smɔl as layt de travul go fa frɔm di LED sɔs ɛn sɔpɔt mɔ yunifom iluminɛshɔn akɔdin to di panɛl.

PMMA Layt Gayd Plɛt

Optik PMMA de yuz as di layt gayd midiɔm bikɔs ɔf in ay optik klia ɛn fit fɔ prɛsishɔn lɛsa-dɔt prɔsesin. Di LGP de transfa LED layt frɔm di panɛl ed dɛn akɔdin to di eria we gɛt layt.

Prɛsishɔn Laser Dɔt Patɛn

Di laser-dot patɛn de kɔntrol usay layt de kɔmɔt na di akrilik. Kɔrɛkt dɔt dɛnsiti ɛn spɛs de ɛp fɔ ridyus brayt ed, dak sɛnta ɛn nɔ ivin layt na kɔstɔm-sayz panɛl dɛn.

LED dɛn we dɛn kin put na ɛj

LED strip dɛn de mawnt along sɔm panɛl ed dɛn we dɛn dɔn pik. Insay di listed standad Wallis kɔnfigyushɔn dɛn, dɛn instɔl LED dɛn along ɔl tu di lɔng sayd dɛn fɔ sɔpɔt mɔ balans iluminɛshɔn, mɔ pan big rɛktangul panɛl dɛn.

Wetin Mek Yu Pik wan Aluminium Fram LED Baklayt Panɛl?

Impɔtant ɔt Dissipeshɔn

Aluminium de kɔndɔkt ɔt fa frɔm di LED mawntin eria ɛn ɛp fɔ mek dɛn kɔntinyu fɔ gɛt mɔ stebul opareshɔn ɛnvayrɔmɛnt. Ifektiv thermal management impɔtant fɔ kɔmɛshɔnal displei dɛn we de wok fɔ lɔng tɛm.

Strɔng Mɛkanikal Strukchɔ

Di freym de sɔpɔt di panɛl ed dɛn ɛn ɛp fɔ ridyus di bɛnd, edj damej ɛn difɔmeshɔn we dɛn de asembl, transpɔt ɛn instɔleshɔn. Dis na patikyula yusful fɔ big kɔstɔm panɛl ɛn ɛkspɔt prɔjek dɛn.

I izi fɔ Maunt ɛn Integreshɔn

Wan aluminiɔm freym de gi wan difayn mɛkanikal strɔkchɔ we dɛn kin intagret insay layt bɔks, wɔl displei, mɛnyu bod, rital fiks ɔ ɔda kɔmɛshɔnal asɛmbli. Faynal brakɛt ɛn di ditel dɛn fɔ di mawntin kin bi disayn akɔdin to di we aw dɛn de instɔl am.

Prɔfɛshɔnal Finish Apɛndiks

Aluminium profayl dɛn de gi klin ɛn durable edj finish, we de mek panɛl dɛn we gɛt freym fayn fɔ ɛksplɔz rital, ɔspitul, ɔfis, shorum ɛn ɛgzibishin aplikeshɔn dɛn.

Bɛtɛ Protɛkshɔn We Dɛn De Transpɔt

Di rigid perimita strɔkchɔ de gi ɔda protɛkshɔn fɔ di LGP ɛn panɛl ed dɛn we dɛn de handle ɛn intanashɔnal shiping kɔmpia wit wan nɔ sɔpɔt bare layt gayd plet.

LED Backlight Panel Struktur ɛn Optik Dizayn

Standart aluminium fram LED baklayt panɛl saiz dɛn

Kastom Sayz LED Baklayt Panɛl fɔ OEM Projɛkt dɛn

Standart pepa saiz dɛn fayn fɔ posta ɛn sayn, bɔt bɔku rital fiks, mɛnyu bod ɛn branded displei dɛn nid dimɛnshɔn dɛn we nɔ standad. Wallis kin prosɛs kɔstɔm layt gayd panɛl dɛn akɔdin to di finish visible eria, freym saiz ɛn instɔleshɔn strɔkchɔ.

Kastom Rɛktangul Panɛl dɛn

Dɛn kin mek kɔstɔm-wid ɛn kɔstɔm-lɛng panɛl dɛn akɔdin to di fɔnicha, sayn, mɛnyu-bɔd ɔ rital-fiks dimɛnshɔn pas fɔ mek di pɔsin we bay fɔ ridizayn di prɔjek rawnd standad A ɔ B saiz dɛn.

CNC -Kɔt Kɔstɔm Shep dɛn

CNC prɔsesin kin yuz fɔ kɔmpitabl kɔstɔm shep, ol ɛn edj ficha dɛn. Di wan dɛn we de bay fɔ gi kɔrɛkt drɔin dɛn we de sho di say we gɛt layt, di dimɛnshɔn dɛn we de na do ɛn di say dɛn we dɛn fɔ put kebul ɔ fɔ put am.

Distribushɔn fɔ Laser Dot we dɛn dɔn kɔstɔmayz

Di optik dot patɛn kin ajɔst akɔdin to panɛl jɔyometri, LED ples ɛn layt target. Kastomiz dot density de ɛp fɔ impɔtant yunifom pan ɔnusual aspek rɛsɛshɔn ɛn nɔ-standad saiz.

Aplikeshɔn dɛn fɔ Aluminium Fram LED Baklayt Panɛl dɛn

Advatayzmɛnt Layt Bɔks dɛn

LGP panɛl dɛn we gɛt edj layt de gi wan tin iluminɛshɔn sɔs biɛn advatayzmɛnt grafik dɛn ɛn dɛn kin intagret dɛn insay layt bɔks dɛn we dɛn kin put na di wɔl, posta freym dɛn ɛn kɔmɛshɔnal sayn kabinɛt dɛn.

Menyu Bɔd dɛn

Rɛstɔrant dɛn, kafe dɛn ɛn fud-savis brand dɛn kin yuz kɔstɔm baklayt panɛl dɛn biɛn menyu grafik usay tin kɔnstrɔkshɔn ɛn kɔnsistɛns layt impɔtant.

Ritayl ɛn POS Displei dɛn

LED layt gayd panɛl dɛn kin intagret insay prodak displei, shelf sistem, prɔmoshɔnal fiks ɛn pɔynt-ɔf-sɛl instɔleshɔn fɔ mek layt branding ɛn mɛrchandising ɛlimɛnt dɛn.

Logo ɛn Brand Panɛl dɛn

Kastom CNC shep ɛn optik dizayn kin sɔpɔt logo dɛn we gɛt layt, kɔpɔt sayn dɛn ɛn branded akitekchral ficha dɛn.

Ɛgzibishin ɛn Tred Sho Displei dɛn

Slim baklaytin kin intagret insay ɛgzibishin wɔl, kɔnta, prodak displei ɛn tɛmporari branded strɔkchɔ usay spɛs efyushɔn ɛn vijual impak impɔtant.

Intɛriɔ ɛn Dekɔretiv Baklaytin

Yu kin yuz kɔstɔm layt panɛl dɛn bak biɛn translucent dɛkɔretiv matirial dɛn, fɔnicha ficha dɛn ɛn intɛriɔ sɔfays usay yunifom planar iluminɛshɔn nid fɔ de.

Edge-Lit LGP Panel vs Dairekt Baklayt Panel

Aw fɔ Impruv LED Baklayt Panɛl Yunifɔmiti

Yunifɔmiti dipen pan di kɔmplit optik dizayn pas LED braytnɛs nɔmɔ. Di rilayshɔn bitwin LED lokeshɔn, PMMA tiknes, laser-dot density, riflɛkta, difyuza ɛn panɛl dimɛnshɔn dɛn fɔ tink bɔt togɛda.

• Optimayz laser-dot density akɔdin to distans frɔm di LED sɔs.

• Match LED braytnɛs ɛn spays to panɛl saiz.

• Yuz di rayt LED ɛntrɛ sayd fɔ di panɛl aspek rɛtɛshɔn.

• Mentɛn akchual alaynɛshɔn bitwin LED ɛn PMMA edj dɛn.

• Yuz fayn riflekta ɛn difyushɔn matirial usay nid de.

• Kontrol PMMA edj kwaliti afta CNC prɔsesin.

• Prototype unusual sizes bifo mas prodakshɔn usay prɛktikal.

Aw fɔ Pik wan Aluminium Fram LED Baklayt Panɛl

1. Kɔnfɛm di Finished Panel Sayz

Gi di ɔl di freym saiz ɛn di say we dɛn nid fɔ gɛt layt. Fɔ di prɔjek dɛn we dɛn dɔn instɔl insay ɔda os, gi bak ples fɔ instɔleshɔn we de ɛn di tin dɛn we dɛn nid fɔ du fɔ tolɛreshɔn.

2. Pik Panɛl Tiknɛs

Standart list opshɔn dɛn inklud 7 mm, 8 mm, 9 mm ɛn 10 mm. Selekshɔn dipen pan panɛl saiz, mɛkanikal strɔkchɔ ɛn optik rikwaymɛnt.

3. Kɔnfɛm di Braytnɛs we Yu nid

Tɛl Wallis aw dɛn go yuz di panɛl ɛn if di target na fɔ advatayz baklayt, dɛkɔretiv iluminɛshɔn, mɛnyu-bɔd layt ɔ ɔda aplikeshɔn. If yu nid wan patikyula luminans ɔ iluminɛns target, put am insay di tɛknikal inkwyuizhɔ.

4. Pik Layt Kɔlɔ

Di standad opshɔn dɛn we de naw inklud 3000K wam wayt, 6000K kul wayt ɛn RGB. Dɛn kin pik wayt layt fɔ grafik prɛzɛntɛnshɔn, we dɛn kin yuz RGB fɔ dɛkɔretiv ɔ dinamik vijual ifɛkt.

5. Kɔnfɔm LED Ɛntri Sayd dɛn

Di listed standad konfigyushɔn dɛn de yuz LED dɛn na ɔl tu di lɔng sayd dɛn. Kastom dizayn kin nid difrɛn LED plesmɛnt dipen pan saiz, aspek rɛsɛshɔn ɛn target braytnɛs. Di optik patɛn fɔ disayn rawnd di fayn LED arenjmɛnt.

6. Kɔnfɔm Kebul ɛn Pawa Ples dɛn

Kebul ɛkzit ɛn pawa kɔnɛkshɔn fɔ de akɔdin to di las instɔleshɔn. Mak di waya dairekshɔn we yu nid, di kɔnɛkta ples ɛn di instɔleshɔn spɛs we de na di drɔin.

7. Kɔnfɛm Instɔlɛshɔn Mɛtɔd

Tɛl Wallis if di panɛl go de na di wɔl, dɛn go put am insay fɔnicha, put am insay layt bɔks ɔ yuz am as pat pan ɔda OEM asɛmbli so dat dɛn go ebul fɔ evalyu di freym ɛn di mɛkanikal ditil dɛn akɔdin to dat.

Kastɔm ​​Prɔsesin ɛn OEM Savis

Wallis de gi projɛkt-bɛs prɔsesin fɔ kɔstɔmayz LED layt gayd panɛl asɛmbli dɛn. Dɛn kin kɔdinɛt di savis dɛn akɔdin to di pɔsin we bay in las drɔin ɛn asɛmbli rikwaymɛnt dɛn.

• Kastom PMMA layt gayd panɛl dimɛnshɔn dɛn

• Laser dot pɔtn dizayn

• CNC fɔ kɔt ɛn shep

• Hole drilling ɛn kɔstɔm opin dɛn

• LED strip we de mach

• Kastom aluminiɔm freym dimɛnshɔn dɛn

• 3000K / 6000K / RGB layt opshɔn dɛn

• Wayring ɛn kebul-pɔzishɔn kɔstɔmayshɔn

• Panɛl saplai we dɛn dɔn gɛda bifo tɛm

• Sampul tɛst we dɛn de du

• Ekspɔt pakej dɛn

• OEM / ODM projɛkt sɔpɔt

Infɔmeshɔn we Yu Nid Fɔ Wan Kɔt Kɔt

Fɔ gi kɔmplit prɔjek infɔmeshɔn de ɛp fɔ shɔt di optik-dizayn ɛn kot prɔses.

• Oval panɛl saiz

• Eria fɔ layt we pɔsin kin si

• Tik we dɛn nid

• Kwantiti we dɛn nid

• 3000K, 6000K ɔ RGB rikwaymɛnt

• Luminans ɔ braytnɛs target we dɛn nid, if dɛn spɛsifa am

• LED ɛntrɛ sayd dɛn

• Di we aw dɛn kin instɔl am

• Kebul ɛkzit pozishɔn

• Pawa saplai ɔ kɔntrol we yu nid

• CNC ol ɔ spɛshal shep dɛn

• Fram kala ɔ profayl rikwaymɛnt

• Di tin we dɛn nid fɔ pak

• JPG, PDF, DXF ɔ DWG projɛkt drɔin

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt LED Baklayt Panɛl dɛn

Wetin na LED layt gayd panɛl?

Wan LED layt gayd panɛl de yuz LED dɛn we dɛn dɔn put na di ed ɛn wan optik layt gayd plet fɔ sheb layt akɔdin to wan flat say. Laser dot ɔ ɔda optik patɛn de pul di layt frɔm di PMMA ɛn mek mɔ yunifom planar iluminɛshɔn.

Wallis kin mek kɔstɔm-sayz LED baklayt panɛl dɛn?

Yɛs. Standart A0–A4 ɛn B1–B3 fɔmat dɛn de na di list, ɛn dɛn kin prodyuz nɔ-standad saiz dɛn akɔdin to di pɔsin we bay in drɔin ɛn optik rikwaymɛnt dɛn.

Us tik tik dɛn de?

Di kɔrɛnt standad spɛsifikɛshɔn de list 7 mm, 8 mm, 9 mm ɛn 10 mm opshɔn dɛn. Di tik we fit dipen pan di panɛl dimɛnshɔn, strɔkchɔ ɛn optik dizayn.

Us layt kɔlɔ dɛn de?

Di standad opshɔn dɛn we de naw inklud 3000K wam wayt, 6000K kul wayt ɛn RGB. Dɛn fɔ tɔk bɔt ɔda layt dɛn we dɛn nid we dɛn de ɛvaluet di prɔjek.

Wetin mek dɛn kin put LED dɛn na ɔl tu di lɔng say dɛn?

If yu gi layt frɔm ɔl tu di lɔng say dɛn, dat kin mek di braytnɛs distribyushɔn bɛtɛ akɔdin to big rɛktangul panɛl dɛn. Faynal LED pozishɔn fɔ disayn akɔdin to panɛl dimɛnshɔn, LED ɔtput ɛn di laser-dɔt patɛn.

Aw laser dɔt dɛn kin mek layt gɛt wanwɔd?

Laser dot dɛn de ridayrɛkt layt kɔmɔt na di PMMA sɔfays. Dɛn kin chenj di dɔt dɛnsiti akɔdin to di panɛl fɔ kɔmpɛns di chenj dɛn we de apin na di layt ɛn fɔ ridyus di say dɛn we yu kin si we brayt ɔ dak.

Yu tink se dɛn kin CNC kɔt di panɛl insay kɔstɔm shep dɛn?

Yɛs. Wallis kin CNC kɔt, trim, drɔl ɛn prosɛs kɔmpitabl kɔstɔm shep dɛn akɔdin to di drɔin dɛn we dɛn dɔn gi. Di optik dizayn fɔ divɛlɔp rawnd di fayn fayn jɔyometri we dɔn dɔn.

Us fɔmat dɛn fɔ drɔ a kin gi?

Di Wallis prodak infɔmeshɔn we de naw de list JPG, PDF, DXF ɛn DWG fayl dɛn fɔ kɔstɔm prɔjek ɛvalueshɔn ɛn prɔsesin.

Wallis kin kɔstɔmayz di laser dot patɛn?

Yɛs. Laser dot paramita dɛn kin ajɔst akɔdin to panɛl saiz, LED ples, braytnɛs target ɛn fayn aplikeshɔn fɔ impɔtant iluminɛshɔn yunifɔmiti.

Yu tink se di LED baklayt panɛl kin dim?

Dimming dipen pan di LED strip we yu dɔn pik, drayva ɛn kɔntrol. If dimming nid fɔ de, spɛsifa di kɔntrol we ɛn ilɛktrik sistem we yu de aks fɔ kot so dat dɛn go ebul fɔ evalyu kɔmpatibl kɔmpɔnɛnt dɛn.

Yu tink se dɛn kin kɔntrol RGB laytin wan bay wan?

RGB panɛl dɛn nid fɔ gɛt kɔmpitabl RGB kɔntrol ɛn pawa sistem. Tɛl Wallis aw dɛn go kɔntrol di panɛl so dat di LED strip, waya ɛn kɔntrol go mach kɔrɛkt wan.

Yu kin yuz LED baklayt panɛl dɛn na do?

Di standad prodakt na fɔ indo aplikeshɔn dɛn mɔ. Ɔda projɛkt dɛn nid fɔ gɛt fayn sial strɔkchɔ ɛn matirial dɛn we dɛn pik fɔ UV , mɔstɔ ɛn envayrɔmɛnt ɛksplɔshɔn. Gi di aktual kondishɔn dɛn we de na do bifo yu ɔda.

Yu tink se di panɛl baklayt fabrik ɔ print grafik?

Yɛs. LED layt gayd panɛl dɛn kin yuz biɛn kɔmpitabl advatayzmɛnt grafik dɛn, translucent film dɛn ɛn displei matirial dɛn. Di las braytnɛs dipen pan grafik transmishɔn ɛn panɛl autput.

Yu tink se aluminiɔm freym bɛtɛ pas LED panɛl we nɔ gɛt freym?

Wan aluminiɔm freym de gi ɔda mɛkanikal sɔpɔt, edj protɛkshɔn, ɔt disipeshɔn ɛn mawntin strɔkchɔ. Dɛn kin lɛk panɛl we nɔ gɛt freym usay fɔ luk we nɔ gɛt bɔda atɔl impɔtant mɔ. Di bɛtɛ opshɔn dipen pan di las aplikeshɔn.

Wallis kin gi wan kɔmplit panɛl we dɛn dɔn gɛda bifo tɛm?

Yɛs. Wallis kin gi prɛ-assembled LED baklayt panɛl dɛn we inklud di PMMA layt gayd plet, LED strip dɛn, aluminiɔm freym, waya ɛn projɛkt-spɛsifi k pak akɔdin to di kɔnfyus ɔda spɛsifikɛshɔn.

A kin ɔda wan sampul bifo mas prodakshɔn?

Sampul tɛst de fɔ kɔstɔm prɔjek dɛn. Wan protɔtayp de alaw di pɔsin we bay fɔ evalyu di dimɛnshɔn, yunifom, laytin kɔlɔ, freym strɔkchɔ ɛn instɔleshɔn ditil bifo big prodakshɔn.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi di panɛl dimɛnshɔn, eria we gɛt layt, tik, kwantiti, layt kɔlɔ, braytnɛs we dɛn nid, LED sayd dɛn, we fɔ instɔl am, kebul pozishɔn ɛn prɔjek drɔin dɛn. If dɛn dɔn ɔlrɛdi difayn ilɛktrik spɛsifikɛshɔn ɔ dimming rikwaymɛnt, inklud dɛn bak.

Rikwest wan Kot fɔ Kastɔm ​​Aluminium Fram LED Baklayt Panɛl dɛn

Yu de luk fɔ kɔstɔm LED baklayt panɛl manifakta fɔ advatayzmɛnt displei, mɛnyu bod, rital fiks, logo panɛl ɔ OEM laytin prɔjek? Wallis de gi PMMA layt gayd panɛl prɔsesin, laser-dot optik dizayn, aluminiɔm freym asɛmbli ɛn kɔstɔm LED maching fɔ B2B aplikeshɔn dɛn.

Send yu saiz, drɔin, tiknes, layt kɔlɔ, braytnɛs rikwaymɛnt ɛn ɔda kwantiti fɔ gɛt wan fayn panɛl rɛkɔmɛndishɔn ɛn kot.