Kastom 33mm supa tin SEG LED fabrik layt boks

33mm Supa Tin SEG LED Fabrik Layt Bɔks fɔ Indo Advatayzmɛnt

Wallis 33mm supa tin SEG LED fabrik layt bɔks na slim layt advatayzmɛnt displei we dɛn mek fɔ rital stɔ, shopin mal, ɛgzibishin, shorum, aypɔt, rɛstɔrant, kɔpɔt intɛriɔ, branded wɔl ɛn ɔda indo kɔmɛshɔnal displei projɛkt dɛn.

Mɔdal AF18 jɔyn wan aluminiɔm profayl, silikon edj grafik (SEG) fabrik sistem ɛn ɔl tu wan PMMA akrilik layt gayd panɛl ɔ dairekt LED baklaytin, dipen pan displei saiz, di braytnɛs we dɛn nid ɛn layt-bɔks dip.

Di standad AF18 LGP konfigyushɔn gɛt wan nominal 33mm profayl dip . Di opshɔn dɛn we de naw na DC12V / DC24V, 3000K / 4000K / 6500K, silva / blak / kɔstɔmayz freym kɔlɔ, singl- ɔ tu-sayd displei, we dɛn kin put na di wɔl, we dɛn kin hang ɛn we dɛn kin tinap fɔ dɛnsɛf.

Di SEG grafik de yuz wan silikon strip we dɛn siŋ rawnd di perimita fɔ di klos we dɛn print. Dɛn kin put di silikon ed insay di aluminiɔm chanɛl fɔ tɛnsi di grafik akɔdin to di frɔnt pat pan di layt bɔks, we de mek wan klin, klos to freymlɛs displei sɔfays we de alaw fɔ pul grafik ɛn riples we kampen dɛn chenj.

Fɔ B2B projɛkt, di wan dɛn we de bay fɔ difayn di ɔda freym saiz, grafik saiz we pɔsin kin si, di SEG fabrik saiz we dɔn dɔn, dip profayl, displei sayd, LED akitɛkɛt, braytnɛs target, yunifɔmiti rikwaymɛnt, kɔlɔ tɛmpracha, CRI, pawa, instɔleshɔn tayp, grafik spɛsifikɛshɔn, sɛtifikeshɔn rikwaymɛnt ɛn kwantiti bifo kot.

AF18 SEG LED fabric lait boks spesifikasi

Ɛnjinia data stil rɛkɔmɛnd: di prɔdak pej we de naw nɔ de pablish wan fiks luminans, iluminans, layt yunifom, CRI, wat fɔ ɛni layt bɔks, LED chip spɛsifikɛshɔn, LED pitch, drayva mɔdel, dimming protɔkɔl, IP retinj ɔ fɔmal warranty fɔ ɛvri AF18 kɔnfigyushɔn. Dɛn valyu ya fɔ kɔnfyus akɔdin to di las saiz ɛn layt akitɛkɛt.

Aw di SEG Fabrik Grafik Sistem De Wok

Silicone Edge Sewn to di Grafik

Dɛn kin siŋ wan fleksibul silikon strip rawnd di perimita fɔ di grafik we dɛn dɔn print wit klos. Di silikon dimɛnshɔn ɛn di say we dɛn de siŋ fɔ mach di aluminiɔm ɛkstrushɔn we dɛn dɔn pik.

SEG Edge Inserts insay di Aluminium Chanɛl

Di silikon edj de pres insay di smɔl chanɛl we de rawnd di aluminiɔm profayl. Prɔpa fabrik saiz ɛn silikon-ɛj dimɛnshɔn dɛn de mek tɛnsiɔn akɔdin to di grafik fes.

Tɛnshɔn De Krio Klin Displei Sɔfays

SEG grafik dɛn we gɛt kɔrɛkt saiz de ɛp fɔ ridyus di wrinkles ɛn frɔnt fastɛns dɛn we pɔsin kin si, we de mek wan klin layt we fayn fɔ prɛmiɔm rital ɛn kɔmɛshɔn ɛnvayrɔmɛnt dɛn.

Yu kin Riples Grafik fɔ Nyu Kampen dɛn

We kampen at wok chenj, di wan dɛn we de yuz am kin pul di klos we dɔn de ɛn instɔl wan riplesmɛnt grafik we dɛn de kip di aluminiɔm freym ɛn di LED sistem.

Edge-Lit LGP vs Dairekt LED Baklaytin

Naw, Wallis de gi tu layt we fɔ dis prɔdak famili. Di kɔrɛkt chukchuk dipen pan layt-bɔks dimɛnshɔn, profayl dip, braytnɛs target, grafik matirial ɛn yunifom we yu want.

Edge-Lit PMMA Layt Gayd Panɛl

Insay wan ed-lit kɔnfigyushɔn, LED dɛn de injɛkt layt insay di edj fɔ wan PMMA layt gayd panɛl. Wan optik patɛn we dɛn dɔn prosɛs de pul ɛn sheb di layt akɔdin to di displei sɔfays.

Di Wallis pej we de naw de rikɔmɛnd di LGP we patikyula fɔ supa-tin strɔkchɔ dɛn we de dɔŋ lɛk 40mm dip ɛn displei dɛn we de dɔŋ lɛk 2000mm . Dis na di prɔdak gaydlayn we de naw pas fɔ bi wan yunivasal injinɛri limit; fainal suitabiliti fɔ kɔnfyus akɔdin to aspek rɛsɛshɔn ɛn braytnɛs rikwaymɛnt.

Dairekt LED baklit modul

Insay dairekt-baklit sistem, dɛn kin put LED mɔdyul dɛn biɛn di fabrik grafik ɛn dɛn kin sheb layt to di displei fes we dɛn nɔ yuz ful PMMA layt gayd plet.

Naw, Wallis de rikɔmɛnd LED baklit mɔdyul fɔ big fabrik layt bɔks usay big displei dimɛnshɔn ɔ prɔjek-spɛsifi k braytnɛs ɛn yunifom de mek dairekt iluminɛshɔn mɔ aprɔpriet.

Aw fɔ Pik Bitwin LGP ɛn Dairekt Baklaytin

Pik LGP We Ultra-Slim Dip Na Krio

Edj laytin we dɛn jɔyn wit PMMA LGP yusful we dip we di instɔleshɔn fɔ de shalo ɛn di panɛl dimɛnshɔn dɛn fɔ stil fit fɔ di optik yunifɔmiti we dɛn nid.

Pik Dairekt Baklayt fɔ Big Displei Ɛria dɛn

Big displei dɛn kin nid fɔ sheb mɔ layt dairekt wan. Wan dairekt-baklit LED layout kin disayn akɔdin to di dip bihayn di grafik, LED bim angle ɛn target braytnɛs.

Kɔmpia Tɔtɔl Pawa, Nɔto Ɔnli Profayl Dip

Tu layt bɔks dɛn we gɛt di sem saiz kin yuz difrɛn pawa dipen pan LED akitɛkɛt, braytnɛs target, LED efyushɔn ɛn drayva sɛlɛkshɔn. Rikwest totɛl wat fɔ di fayn kɔnfigyushɔn.

Kɔmpia di Yunifɔmiti we Dɛn Mezhɔ

We ivin iluminɛshɔn impɔtant pan kɔntrakt, difayn wan mɛzhɔbal yunifɔmiti target ɛn tɛst di kɔmplit sistɛm wit di baklit fabrik we yu want.

AF18 Standart Saiz, 33mm Profayl & SEG Fabrik Dimenshon

Wallis naw de pablish B1, B2 ɛn A0–A4 rɛfrɛns dimɛnshɔn fɔ di AF18 LGP layt bɔks. Di tebul difrɛns bitwin freym saiz, visible eria ɛn finish fabric saiz , we impɔtant we kɔstɔma dɛn print riplesmɛnt SEG grafik dɛn lokal wan.

Insay di rɛfrɛns tebul we de naw, di SEG fabrik big lɛk 10mm pan ɔl tu di wit ɛn ayt pas di dimɛnshɔn dɛn we dɛn rayt na di freym/viu. Baya dɛn we de print lokal nɔ fɔ jenɛral dis alawɛns to ɛvri kɔstɔmayz prɔfayl. Ɔltɛm aks fɔ di prodakshɔn drɔin ɛn silikon-ɛj spɛsifikɛshɔn fɔ di ɛksaktɔl freym.

Wetin mek di 33mm AF18 Profayl Na Yuzful

Slim Wall Projekshɔn fɔ di wɔl

Wan 33mm profayl de alaw grafik dɛn we gɛt layt fɔ sidɔm rili nia di wɔl, we de mek AF18 fayn fɔ rital ples usay dip we de de nɔ bɔku.

Klin di we aw yu de luk we nɔ gɛt freym

Di silikon-edj fabrik de ayd bɔku pan di frɔnt aluminiɔm strɔkchɔ, we de ɛp di artwok we gɛt layt fɔ bi di men tin we pɔsin kin si.

I fayn fɔ Standart Advatayzmɛnt Fɔmat dɛn

B1, B2 ɛn A0–A4 rɛfrɛns dimɛnshɔn dɛn de mek prɔjek dɛn izi we dɛn de yuz advatayzmɛnt ɛn sayn fɔmat dɛn we dɛn sabi.

Kastom Dimenshɔn dɛn we De

Kastom freym dimɛnshɔn dɛn kin rivyu akɔdin to aluminiɔm ɛkstrushɔn lɔng, LGP fisibiliti, LED layout, shiping rikwaymɛnt ɛn instɔleshɔn kɔndishɔn.

3000K, 4000K & 6500K LED Kɔlɔ Tɛmpratura

3000K Wam Wait

Yu kin tink bɔt wam-wayt layt fɔ ɔspitul, lɔjishɔn rital ɛn intɛriɔ ɛnvayrɔmɛnt dɛn we de yuz wam ambiɛnt laytin.

4000K Nyutral Wait

Nyutral-wayt layt kin gi balans apinans fɔ shorum, kɔmɛshɔnal intɛriɔ ɛn jenɛral rital displei aplikeshɔn.

6500K Kul Wait

Kul-wayt 6500K na yusful usay di wan dɛn we de bay want wan krisp, brayt vijual apinans fɔ advatayzmɛnt grafik dɛn we gɛt layt.

Spɛsifik CRI Separet wan

Kɔlɔ tɛmpracha nɔ de sho se di kɔlɔ-rɛnda kwaliti. Di prɔdak pej we de naw nɔ de pablish CRI valyu, so fashɔn, kɔsmɛtik, it ɛn ɔda prɔjek dɛn we gɛt kɔlɔ fɔ sho di CRI we dɛn nid sɛpret wan.

DC12V & DC24V Pawa Opshɔn dɛn

Di AF18 prodakt spesifikeshɔn de sɔpɔt DC12V ɛn DC24V naw . Di fainal vɔlɔt fɔ pik togɛda wit di LED layout, panɛl saiz, totɛl wat, pawa-saplai ples ɛn kebul lɔng.

Kɔnfɛm Tɔtɔl Pawa

Pawa kɔnsɔmshɔn nɔ de pablish naw as wan fiks valyu bikɔs i de chenj wit saiz ɛn LED kɔnfigyushɔn. Di wan dɛn we de bay fɔ aks fɔ totɛl wat fɔ ɛni layt bɔks we dɔn dɔn.

Konfam di LED Drayva

Drayva input vɔlɔt, ɔtput vɔlɔt, rayt pawa, instɔleshɔn ples ɛn aplikebul sɛtifikeshɔn fɔ kɔnfyus fɔ di dɛstineshɔn makit.

Di tin dɛn we yu nid fɔ mek yu nɔ shayn

Di Wallis pej we de naw nɔ de pablish wan standad dimming protɔkɔl. Projek we nid 0–10V, DALI, PWM ɔ ɔda kɔntrol we fɔ spɛsifa am bifo dɛn prodyuz.

SEG Layt Bɔks dɛn we gɛt singl-sayd & dabl-sayd

Displei we gɛt wan say

Singl-sayd kɔnfigyushɔn dɛn fayn fɔ put na di wɔl ɛn ɔda instɔleshɔn dɛn usay dɛn kin si di displei mɔ frɔm wan say.

Displei we gɛt tu Sayd

Dɛn kin tink bɔt di kɔnfigyushɔn dɛn we gɛt tu sayd fɔ displei dɛn we de hang ɔ fristand we dɛn de si frɔm ɔl tu di say dɛn. Di profayl ɛn laytin akitɛkɛt we dɛn nid fɔ kɔnfyus bikɔs wan dabl-sayd sistɛm kin difrɛn mɛkanikal wan frɔm di standad 33mm singl-sayd LGP kɔnfigyushɔn.

Wall-Mounted, Hanging & Fristandin Instɔlɛshɔn

SEG Layt Bɔks we dɛn kin put na di wɔl

Wall mounting na fayn fɔ rital grafik, menyu bod, shorum branding ɛn pɔrmanent kɔmɛshɔnal advatayzmɛnt instɔleshɔn.

Bɔks we gɛt layt we de hang

Dɛn kin yuz instɔleshɔn dɛn we dɛn dɔn stɔp usay di grafik dɛn fɔ kɔntinyu fɔ de ɔp di ay lɛvɛl ɔ frɔm bɔku say dɛn we di wata de rɔn. Suspension points ɛn total assembled weight fɔ kɔnfyus di tɛm we dɛn de disayn di strɔkchɔral.

Boks we gɛt layt we de tinap fɔ insɛf

Fristandin displei nid fayn fut, bays strɔkchɔ ɔ stebul sɔpɔt. Big yunit dɛn fɔ ɛnjɛnɛri akɔdin to di ayt, waid, sɛnta ɔf graviti ɛn di say we dɛn de instɔl dɛn.

Aplikeshɔn fɔ Supa Tin SEG LED Fabrik Layt Bɔks dɛn

Ritayl Stɔ dɛn

SEG grafik dɛn we dɛn kin chenj kin yusful fɔ sizin prɔmoshɔn, nyu prɔdak lanch, winda displei, shɔp wɔl ɛn vijual mɛkshɛniz.

Di say dɛn we dɛn kin go bay tin dɛn

Slim layt fabrik bɔks dɛn kin intagret insay kɔridɔ, stoa ɛntrɛ, brand wɔl ɛn tɛnant advatayzmɛnt eria.

Egzibishin & Tred Sho dɛn

Dɛn kin put kɔstɔm SEG displei dɛn insay ɛgzibishin bɔt wɔl dɛn, prɔmoshɔnal bakdrop dɛn ɛn prodak eria dɛn we gɛt layt.

Restɔrant dɛn & Menyu Displei dɛn

Yu kin yuz fabrik grafik dɛn we gɛt layt fɔ mek di menyu imej, fɔ mek rɛstɔrant brand ɛn fɔ mek prɔmoshɔnal mɛsej usay dɛn nid fɔ ɔpdet di at wok ɔltɛm.

Shorum & Brand Wall dɛn

Ɔtomotiv, fɔnicha, ilɛktroniks, kɔsmɛtik ɛn ɔda shorum dɛn kin intagret ed-lit ɔ baklit fabrik grafik dɛn insay akitekchral displei sistem dɛn.

Stretch Siling & Intɛriɔ Layt

LED baklaytin sistem dɛn kin inkɔrpɔret bak insay strɛch-fabrik siling ɛn big layt intɛriɔ sɔfays dɛn we dɛn mek di profayl dip, LED spɛshal ɛn difyuza ɔ fabrik kwaliti dɛn fɔ di aplikeshɔn.

Aw fɔ Pripia di Kɔrɛkt SEG Fabrik Grafik

Kɔnfɔm di Dimɛnshɔn dɛn fɔ di Fabrik we Dɛn dɔn dɔn

Nɔ tink se di dimɛnshɔn fɔ di klos ikwal to di saiz we pɔsin kin si ɔ di saiz we de na do na di freym. Rikwest di finish SEG grafik dimɛnshɔn fɔ di ɛksaktɔ aluminiɔm profayl.

Konfam Silikɔn Edj Spɛsifikeshɔn

Silikɔn wit, tik, hadnɛs ɛn siwin pozishɔn de inflɔws aw di grafik fit fayn fayn wan insay di ɛkstrushɔn. Dɛn valyu ya nɔ de pablish naw fɔ AF18 ɛn dɛn fɔ kɔnfyus dɛn we dɛn de mek grafik dɛn na di say we dɛn de.

Konfam Fabrik Stretch Dairekshɔn

Fabrik strɛch kwaliti dɛn kin inflɔws fayn tɛnsiɔn. Di pɔsin we de gi di printa ɛn di freym fɔ yuz di sem sayz we dɛn dɔn dɔn.

Pik wan Fabrik we Fayn fɔ Baklayt

Layt transmishɔn, difyushɔn, print dɛnsiti ɛn wayt-pɔynt kwaliti dɛn kin afɛkt di rizɔlt we gɛt layt. Di wan dɛn we de bay fɔ tɛst di tin we dɛn want fɔ print wit di rial LED sistem.

Chek di tin dɛn we yu nid fɔ rayt fɔ mek faya

Shopin mal, aypɔt, ɛgzibishin ɛn pɔblik intɛriɔ kin nid spɛshal flame-performance dokumɛnt fɔ fabrik grafik. Gi di standad we yu nid bifo yu pik di grafik matirial.

Braytnɛs, Yunifɔmiti & CRI fɔ Prɔfɛshɔnal Displei dɛn

Luminans we de mek pɔsin gɛt layt

Fɔ advatayzmɛnt displei, mɛzhɔ luminans we dɛn ɛksprɛs insay cd/m² gi wan mɔ yusful spɛsifikɛshɔn fɔ bay pas di frayz 'hay braytnɛs.' Di pej we de naw nɔ de pablish wan fiks luminans valyu bikɔs kɔnfigyushɔn dɛn de difrɛn.

Yunifɔm fɔ Layt

Yunifɔmiti de sho if di klos de sho se i gɛt layt ivin akɔdin to di kɔna dɛn, di sɛnt ɛn di ed dɛn. Difayn di pasɛnt we dɛn nid ɛn di we fɔ tɛst usay yunifom impɔtant.

CRI

CRI kin bi impɔtant mɔ fɔ kɔsmɛtik, fashɔn, it, art ɛn prɛmiɔm rital grafik usay kɔrɛkt kɔlɔ rɛnda impɔtant.

Grafik Densiti De Influɛns Braytnɛs

Dak grafik we dɛn print bad bad wan kin mek smɔl layt pas wan pale grafik. So, braytnɛs ɛvalueshɔn fɔ yuz ripɔt prodakshɔn fabrik ɛnitɛm we i pɔsibul.

Enjinia Data B2B Baya dɛn fɔ Rikwest

• Eksakt aluminiɔm profayl drɔin

• 33mm ɔ projɛkt-spɛsifi k profayl dip

• Maksimal saiz we dɛn kin rɛkɔmɛnd fɔ di laytin akitɛkɛt we dɛn dɔn pik

• Fram saiz

• Grafik saiz we pɔsin kin si

• Finished SEG fabrik saiz

• Silikɔn edj wit ɛn tik

• LED chip / modul model

• LED spays we yu de yuz

• Tɔtɔl pawa kɔnsɔmshɔn

• Pawa saplai spesifikeshɔn

• Di layt we dɛn de mɛzhɔ

• Yunifɔmiti pasɛnt

• CRI

• 3000K / 4000K / 6500K tolerans

• Dimming protɔkɔl usay dɛn nid am

• IP raytin usay dɛn nid am

• CE / RoHS dokumɛnt fɔ ɛksaktɔ kɔnfigyushɔn

• Fabrik flame-rating rikwaymɛnt

• Fɔmal warranty tɛm dɛn

Kwaliti Kontrol fɔ SEG LED Fabrik Layt Bɔks dɛn

Inspekshɔn fɔ di Frɛm fɔ Aluminium

Chek profayl dimɛnshɔn, kɔna jɔyn, freym skwea, sɔfa finish ɛn visible skrat bifo asembli.

LGP Inspekshɔn we dɛn de du

Fɔ ed-lit vɛshɔn dɛn, inspɛkt PMMA layt gayd dimɛnshɔn, optik patɛn, edj finish, sɔfays skrach ɛn kɔntaminɛshɔn.

LED Fכnshכnal Tεst

Verifay LED opareshɔn, vɔlɔt, waya, kɔnɛkta ɛn di kɔlɔ tɛmpracha we yu dɔn pik bifo yu pak di fayn fayn tin.

Braytnɛs & Yunifɔmiti Inspekshɔn

Chek di kɔmplit layt eria fɔ dak kɔna, brayt ed, LED spɔt ɛn ɔda tin dɛn we yu kin si we nɔ kɔrɛkt.

SEG Fabrik Fit Test

Instɔl di prodakshɔn-ikwivalɛnt fabrik fɔ chɛk di grafik dimɛnshɔn, silikon-ɛj fit, sɔfayz tɛnsiɔn ɛn kɔna apinans.

Tɛst fɔ Bɔn-In

Baya dɛn we nid fɔ gɛt difayn bɔn-in tɛst fɔ spɛsifa di tɛm we dɛn nid ɛn di krayteria fɔ aksept bikɔs di prɔdak pej we de naw nɔ de pablish wan standad bɔn-in protɔkɔl.

Golden Sampul we dɛn kɔl

Fɔ ripit rital ɔ ɛgzibishin program, kip wan aprɔv sampul togɛda wit di freym drɔin, fabrik saiz, LED spɛsifikɛshɔn, CCT, pawa ɛn pak kɔnfigyushɔn.

Indoor Use & Envayrɔmɛnt Protɛkshɔn

Di AF18 prodakt na di fɔs pozishɔn fɔ yuz insay os . Di pej we de naw nɔ de pablish IP raytin we de na do fɔ di kɔmplit layt bɔks.

Nɔ Assume se Yu De Du Wata Pruf na do

Displei dɛn we de na do nid fɔ gɛt di rayt wɛda protɛkshɔn fɔ di aluminiɔm asɛmbli, LED dɛn, waya, kɔnɛkta dɛn, drayva ɛn grafik. Wan sɛpret ɔda strɔkchɔ fɔ bi tɛknikal kɔnfɔm pas fɔ yuz di indo AF18 spɛsifikɛshɔn we nɔ chenj.

Chek Humiditi & Tɛmpratura

Dɛn fɔ no bak di say dɛn we gɛt ay humiditi, frij, ay tɛmpracha ɔ ɔda spɛshal indo ɛnvayrɔmɛnt dɛn we dɛn de spɛsifikɛshɔn di prɔjek.

Riyuzable Fram & Riplesable Grafik Dizayn

Wan prɛktikal bɛnifit fɔ SEG displei na dat di aluminiɔm freym ɛn layt sistem kin kɔntinyu fɔ instɔl we dɛn de chenj di klos we dɛn print we advatayzmɛnt kampen dɛn chenj.

Ridyus Kɔmplit Displei Riplesmɛnt

If yu riples di grafik nɔmɔ, dat kin mek yu nɔ nid fɔ trowe di kɔmplit freym we gɛt layt we yu de ɔpdet di kampen ɔltɛm.

Aluminium & PMMA Risayklin Klɛm fɔ Kwalifay

Aluminium ɛn PMMA kin go insay risaykul strim dɛn ɔnda di rayt kɔndishɔn, bɔt di aktual rikavari dipen pan matirial separeshɔn, kɔntaminɛshɔn ɛn lokal risaykul infrastukchɔ.

Avɔyd fɔ Klɛm fɔ Ridyus Kabɔn we Nɔ Sɔpɔt

Di ɔrijinal pej de tɔk bɔt di ridyus we dɛn de pul di kabon we dɛn de pul. If yu nɔ gɛt ɛnaji beslayn ɔ layfsaykl asɛsmɛnt, i kɔrɛkt fɔ tɔk se efyushɔn LED ɛn riyuz grafik sistɛm kin sɔpɔt ɛnaji- ɛn matirial-efyushɔn gol dɛn.

OEM & Kastom SEG Layt Bɔks Manufakchurin

Kastom Frɛm Sayz

Wallis kin rivyu kɔstɔmayz ɔdasay dimɛnshɔn, visible grafik dimɛnshɔn ɛn fabrik dimɛnshɔn akɔdin to di prɔjek drɔin.

Kastom Frɛm Kɔlɔ

Silva ɛn blak de na di list naw, we dɛn kin tɔk bɔt ɔda finish dɛn akɔdin to di kwantiti we di prɔjek gɛt ɛn di we aw dɛn go mek am.

Kastom Layt Akitekchɔ

LGP edj laytin ɔ dairekt LED baklaytin kin pik akɔdin to displei dimɛnshɔn, dip, braytnɛs target ɛn yunifɔmiti rikwaymɛnt.

Lokal Grafik Printin Sɔpɔt

Di kɔstɔma dɛn we de print SEG fabrik lokal wan fɔ aks fɔ di rayt grafik saiz we dɔn dɔn ɛn di silikon-ɛj spɛsifikɛshɔn bifo dɛn prodyuz.

OEM Pak we dɛn de pak

Pakɛj kin divɛlɔp akɔdin to di freym saiz, asɛmbli ɔ knock-dɔwn fɔmat, LGP protɛkshɔn, LED, pawa saplai ɛn ɛkspɔt transpɔt rikwaymɛnt.

Wokshɔp & Ɛkspɔt Pakɛj

Layt-gayd panɛl, LED kɔmpɔnɛnt ɛn aluminiɔm profayl dɛn nid fayn ɛkspɔt protɛkshɔn fɔ ridyus skrach, bɛnd ɛn impak damej we dɛn de transpɔt.

Aw fɔ Spɛsifik wan SEG LED Layt Bɔks fɔ Kwɛt

1. Gi di Frɛm Sayz

Stet ɔdasay wit ɛn ayt ɛn if di prɔjek de yuz standad AF18 saiz ɔ kɔstɔmayz dimɛnshɔn.

2. Kɔnfɛm Visible Graphic Area

Gi di wid ɛn ayt we yu nid fɔ si separet frɔm di ɔda freym dimɛnshɔn dɛn.

3. Pik Singl ɔ Dabl Sayd

Sho di say we yu de wach ɛn if yu nid fɔ yuz grafik dɛn we gɛt layt na wan ɔ ɔl tu di say dɛn.

4. Pik LGP ɔ Dairekt Baklaytin

Wallis kin rεkomεnd wan aprכpriet akitεkchכ afta i rivyu saiz, profayl dip εn braytnes rikwaymεnt.

5. Pik di CCT

Selekt 3000K, 4000K ɔ 6500K ɛn spɛsifa CRI if kɔlɔ rɛnda impɔtant.

6. Difayn Braytnɛs & Yunifɔmiti

Gi target we yu kin mɛzhɔ usay dɛn nid am instead fɔ yuz jɔs jenɛral wɔd dɛn lɛk 'hay braytnɛs.'

7. Selekt DC12V ɔ DC24V

Kɔnfɛm ɔpreshɔn vɔlɔt, drayva rikwaymɛnt ɛn dɛstineshɔn-maket men input.

8. Difayn Instɔlɛshɔn

Spɛsifik di instɔleshɔn we dɛn kin put na di wɔl, we dɛn kin hang ɔ we kin tinap fɔ dɛnsɛf ɛn gi di tin dɛn we dɛn nid fɔ fiks usay nid de.

9. Kɔnfɛm Grafik Sapɔt

Stet if Wallis de saplae di print SEG grafik ɔ if di kɔstɔma de print riplesmɛnt grafik lokal.

10. Gi Kwantiti & Destineshɔn

Kwantiti, shiping dɛstineshɔn ɛn pak rikwaymɛnt dɛn de ɛp fɔ no prodakshɔn planin ɛn ɛkspɔt pak.

FAQ Bɔt 33mm SEG LED Fabrik Layt Bɔks dɛn

Wetin SEG min?

SEG min Silikɔn Ɛj Grafik. Dɛn kin siŋ wan silikon strip rawnd di klos we de rawnd di klos ɛn put am insay di chanɛl fɔ wan aluminiɔm frem.

Wetin na di Wallis AF18 layt bɔks?

AF18 na Wallis in kɔrɛnt supa-tin SEG LED fabrik layt-bɔks mɔdel we dɛn sho na dis prɔdak pej, wit 33mm standad LGP profayl na di saiz tebul we dɛn dɔn pablish.

Aw tik di AF18 SEG layt bɔks?

Di kɔrɛnt standad-sayz AF18 LGP tebul de list wan profayl tiknes we na 33mm.

Na evri customized SEG lait boks ekzakli 33mm tik?

Nɔto fɔ se na so i bi. Di AF18 LGP standad kɔnfigyushɔn we dɛn dɔn pablish na 33mm, we ɔda laytin sistem dɛn, dabl-sayd strɔkchɔ ɔ kɔstɔmayz prɔjɛkt dɛn kin nid ɔda prɔfayl. Kɔnfɛm di las drɔin.

Us standad saiz dɛn de?

Di kɔrɛnt rɛfrɛns fɔmat dɛn inklud B1, B2, A0, A1, A2, A3 ɛn A4, plus kɔstɔmayz saiz dɛn.

Wetin na di difrɛns bitwin di freym saiz ɛn di klos saiz?

Fram saiz de diskraib di layt-bɔks strɔkchɔ, we di fabrik saiz de diskraib di finish SEG grafik we inklud di tɛnsiɔn alawɛns we di ɛkstrushɔn we dɛn dɔn pik nid.

Di kɔstɔma dɛn kin print riplesmɛnt SEG grafik dɛn lokal wan?

Yɛs, bɔt dɛn fɔ aks fɔ di rayt dimɛnshɔn fɔ di klos we dɛn dɔn dɔn ɛn di silikon-ɛj spɛsifikɛshɔn fɔ di rial prɔfayl bifo dɛn print.

Wetin na LGP ​​layt bɔks?

Wan LGP layt bɔks de yuz akrilik ɔ PMMA layt gayd panɛl fɔ sheb LED layt we dɛn injɛkt frɔm di panɛl ed dɛn akɔdin to di say we gɛt layt.

Ustɛm a fɔ pik LGP laytin?

Di Wallis pej we de naw de rɛkɔmɛnd LGP patikyula fɔ supa-tin strɔkchɔ dɛn we de dɔŋ lɛk 40mm dip ɛn saiz dɛn we de dɔŋ lɛk 2000mm, we de ɔnda di fayn optik rikwaymɛnt dɛn.

Ustɛm a fɔ pik dairekt LED baklayt?

Dairekt LED modul kin bi mɔ aprɔpriet fɔ big displei ɔ aplikeshɔn usay di dip we de ɛn di braytnɛs we dɛn nid de sɔpɔt dairekt baklaytin.

Di layt bɔks gɛt wan sayd ɔ i gɛt tu sayd?

Dɛn rayt ɔl tu di tin dɛn we yu kin pik fɔ du wan ɛn tu say. Di fainal profayl ɛn layt sistɛm fɔ kɔnfɔm fɔ di strɔkchɔ we dɛn dɔn pik.

Us vɔlɔt de?

DC12V ɛn DC24V de na di list naw.

Us LED kɔlɔ tɛmpracha dɛn de?

Di kɔrɛnt prodak spesifikeshɔn de list 3000K, 4000K ɛn 6500K.

Wetin na di braytnɛs?

Di pej we de naw se yu kin kɔstɔmayz braytnɛs bɔt i nɔ de pablish wan fiks cd/m² ɔ lɔks valyu. Rikwest mɛzhɔd pefɔmɛns fɔ di fayn kɔnfigyushɔn.

Wetin na di laytin yunifom?

No numɛrik yunifɔmiti valyu nɔ de naw fɔ dis ɛksaktɔ prodak. Spɛsifik di pasɛnt we dɛn nid we yunifom na kɔntrol prɔjek paramita.

Us CRI de?

Di pej we de naw nɔ de pablish wan CRI valyu. Di wan dɛn we de bay fɔ spɛsifa dɛn CRI we dɛn nid fɔ aplikeshɔn dɛn we gɛt kɔlɔ.

Yu tink se di LED layt bɔks kin dimmable?

Wan standad dimming protɔkɔl nɔ de pablish naw. Kɔnfɛm di kɔntrol sistɛm we dɛn nid bifo dɛn prodyuz.

Yu tink se dɛn kin chenj di kɔlɔ we di freym gɛt?

Yɛs. Silva, blak ɛn kɔstɔmayt freym kɔlɔ dɛn de na di list naw.

Yu tink se dɛn kin put am na di wɔl?

Yɛs. Wall mounting na wan pan di instɔleshɔn opshɔn dɛn we de naw.

Yu tink se dɛn kin suspɛnd am na di siling?

Hanging instɔleshɔn de na di list naw. Sɔspɛns hadwae ɛn strɔkchɔral rikwaymɛnt dɛn fɔ mach to di fayn saiz ɛn wet.

Yu tink se i go ebul fɔ tinap fɔ insɛf?

Fristandin instɔleshɔn de bak na di list, we de ɔnda di rayt bays ɔ sɔpɔt strɔkchɔ.

Yu tink se yu kin yuz dis AF18 layt bɔks na do?

Dɛn mek dis prɔdak mɔ fɔ yuz insay os. Di pej we de naw nɔ de pablish wan ɔda IP raytin fɔ di kɔmplit AF18 asɛmbli.

Wallis de gi CE ɛn RoHS ?

CE ɛn RoHS de na di list naw as dɛn de. B2B bayer dɛn fɔ aks fɔ dɔkyumɛnt dɛn we aplay to di ɛksaktɔ LED, drayva ɛn asɛmbli kɔnfigyushɔn we dɛn de bay.

Aw lɔng di LED layt bɔks de las?

Di Wallis FAQ we de naw se optik pefɔmɛns kin kɔntinyu fɔ strɔng fɔ pas fayv ia ɔnda nɔmal indo kɔndishɔn. Aktual savis layf dipen pan LED, drayva kwaliti, wok awa, ɔt dissipeshɔn ɛn instɔleshɔn ɛnvayrɔmɛnt; dis nɔ fɔ trit am lɛk fɔmal warranty tɛm.

Yu tink se dɛn kin CNC mashin di LGP ɛn akrilik kɔmpɔnɛnt dɛn?

Di Wallis FAQ we de naw se dɛn kin kɔt, drɔ ɛn prosɛs LGP ɛn akrilik kɔmpɔnɛnt dɛn akɔdin to di kɔstɔma dɛn drɔin.

Wallis kin mek kɔstɔm AF18 dimɛnshɔn dɛn?

Yɛs. Dɛn kin tɔk bɔt di dimɛnshɔn dɛn we dɛn kɔstɔmayt, di freym kɔlɔ dɛn, di layt kɔnfigyushɔn dɛn, di instɔleshɔn strɔkchɔ dɛn ɛn di saiz dɛn fɔ di klos dɛn akɔdin to di prɔjek fisibiliti.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi ɔta freym saiz, grafik saiz we pɔsin kin si, kwantiti, singl- ɔ dabl-sayd rikwaymɛnt, instɔleshɔn we dɛn kin put na di wɔl/hang/fristandin, LGP ɔ dairekt-baklit prɛfɛshɔn, braytnɛs target, yunifom target, CRI, 3000K/4000K/6500K rikwaymɛnt, vɔlɔt, grafik saplai we, sɛtifiket, pak ɛn delivri dɛstineshɔn.

Rikwest Kastom 33mm SEG LED Fabrik Layt Bɔks Prayz

Yu de luk fɔ wan SEG LED fabrik layt bɔks manifakta we yu kin abop pan fɔ rital stɔ, ɛgzibishin, mal, shorum ɔ indo advatayzmɛnt prɔjek? Send Wallis yu freym dimɛnshɔn, fabrik saiz, layt rikwaymɛnt, instɔleshɔn we ɛn kwantiti fɔ tɛknikal rivyu, sampul divɛlɔpmɛnt ɛn B2B faktri prayz.