|
Led layt panɛl
Wallis we nem Wallis
| Material: | |
|---|---|
| Sayz: | |
| advantej: | |
| Kwantiti: | |
Wallis de mek kɔstɔm laser dot PMMA akrilik layt gayd plet (LGP) fɔ ed-lit LED layt, advatayz layt bɔks, rital displei, shelf we gɛt layt, sayn, siling layt ɛn akitɔk layt projɛkt.
Prɛsishɔn laser-engraved dɔt patɛn dɛn de disayn akɔdin to di PMMA sɔfays fɔ pul layt we de travul tru di akrilik panɛl ɛn sheb am akɔdin to di eria we dɛn nid we gɛt layt. Dot saiz, density ɛn spacing kin ajɔst akɔdin to panɛl dimɛnshɔn, LED pozishɔn, layt-input dairekshɔn ɛn aplikeshɔn rikwaymɛnt.
Wallis sɔpɔt 3–12 mm tiknɛs, kɔstɔmayz dimɛnshɔn, lɛsa dɔt prɔsesin, V-kɔt, CNC kɔt, drɔlin, ed polish ɛn singl- ɔ dabl-sayd vijual kɔnfigyushɔn fɔ protɔtayp ɛn bɔlk LGP prɔjɛkt dɛn.
Di spesifikeshɔn dɛn we de dɔŋ ya de aplay to di kɔrɛnt Wallis laser-dot akrilik LGP rɛnj. Faynal optik dizayn fɔ mach to di finish panɛl dimɛnshɔn, LED arenjmɛnt ɛn layt-emitin sɔfays we dɛn nid.
| Di Nem fɔ Prodak | Laser Dot PMMA Akrilik Layt Gayd Plɛt | Mak | Wallis we nem Wallis |
| Tin dɛn | Optik PMMA Akrilik | Tik we i tik | 3–12 mm |
| Raw Matirial Sayz | 1220 × 2440 mm | Saiz we dɛn dɔn dɔn | Customized to Projek Rikwaymɛnt dɛn |
| Layt we dɛn kin transmit | Up to 93% fɔ Spɛsifi k Klia PMMA Matirial | Di we aw dɛn de du di wok | Laser Dot / V-Kɔt Layn dɛn |
| Visual Surface we pɔsin kin si | Singl-Sayd / Dabl-Sayd | MOQ we gɛt fɔ du wit am | 1 Pis |
| Kastom Fabrikeshɔn | CNC Kɔt / Drlin / Ɛj Polish / Shep Prɔsesin | Di we aw dɛn de pak di tin dɛn | Katon / Bɔks we dɛn mek wit wud |
| Di Praymari Yuz | Layt / Sayn / Displei / Dɛkɔreshɔn | Ples we Dɛn Kɔmɔt | Shanghai, insay Chaena |
LED strip ɔ modul dɛn de posishun klos to wan ɔ mɔ polish PMMA edj dɛn. Gud alaynɛshɔn bitwin di LED ɛmitin sɔfa ɛn di akrilik ed de ɛp fɔ mek layt kɔpl insay di panɛl bɛtɛ.
We layt dɔn go insay di akrilik, i kin pas na di panɛl. Panɛl tik, dimɛnshɔn, edj kwaliti ɛn di nɔmba fɔ di ed dɛn we gɛt layt de inflɔws aw layt kin travul fayn fayn wan tru di LGP.
Maykrodɔt dɛn we dɛn rayt wit lɛsa kin ambɔg di layt we de insay ɛn pul pat dɛn pan layt we dɛn kin kɔntrol tru di panɛl sɔfays. di patεn kin bi progrεsivli dense fa frכm di LED sכs fכ kכmpεns fכ layt lכs kכros di plet.
Insay bɔku singl-sayd layt asɛmbli dɛn, di LGP de wok togɛda wit wan riya riflɛkta ɛn frɔnt difyuza. Dɛn tin ya kin ɛp fɔ ridayrɛkt layt we yu nɔ yuz ɛn mek di say we yu kin si we gɛt layt smol. Di fainal optik strɔkchɔ fɔ ɛvaluet as kɔmplit sistɛm pas di LGP nɔmɔ.
Difrɛn Akrilik LGP Prɔsesin
Edge-Lit LGP Wok Prinsipul fɔ wok
Layt gayd plet nɔ fɔ jɔs pik bay akrilik tik. Fɔ bɛtɛ yunifom, di optik patɛn fɔ disayn rawnd di kɔmplit LED laytin kɔnfigyushɔn.
Big panɛl dɛn nid layt fɔ travul fa fawe. Panɛl lɔng ɛn wit so de inflɔws di dɔt-dɛnsiti grɛdiɛnt, nɔmba fɔ input edj ɛn fayn PMMA tiknɛs.
Wallis de gi 3–12 mm LGP tiknes. Di tik we fit dipen pan di panɛl dimɛnshɔn, LED pakej ayt, strɔkchɔral rikwaymɛnt ɛn instɔleshɔn spɛs we de.
LED spays ɛn di distans bitwin wan wan LED pakej dɛn kin afɛkt brayt band dɛn nia di panɛl edj. Fɔ gi di LED strip ɔ modul spɛsifikɛshɔn we dɛn want, de ɛp fɔ mek di LGP patɛn mach wit di aktual layt sɔs.
Wan LGP kin gɛt layt frɔm wan, tu ɔ bɔku ed dɛn dipen pan di prɔjek. Big-fɔmat panɛl dɛn kin bɛnifit frɔm ɔda input edj dɛn we wan singl LED ed nɔ ebul fɔ gi di travul distans ɔ yunifom we dɛn nid.
Dot spacing ɛn density fɔ ajɔst akɔdin to distans frɔm di LED dɛn. Wan projɛkt-spɛsifi k gradient de ɛp fɔ balans eria dɛn we brayt nia di layt sɔs wit eria dɛn we de fa frɔm di edj we gɛt layt.
Di layt-input edj fɔ klin ɛn polish fayn fɔ sɔpɔt efishɔnal kɔpl bitwin di LED dɛn ɛn PMMA panɛl. Edj kɔndishɔn impɔtant mɔ fɔ lɔng-distans layt gayd.
Wallis kin sɔpɔt wan-sayd ɔ tu-sayd vijual kɔnfigyushɔn. Di riflekta, difyuza ɛn dɔt layout fɔ pik akɔdin to us sɔfays dɛn we dɛn mek fɔ mek layt kɔmɔt.
Wan laser-dot matris we dɛn mek fayn fayn wan de ɛp fɔ sheb di edj layt akɔdin to di panɛl instead fɔ kɔnsɛntret braytnɛs nia di LED strip. Dis de ridyus di difrɛns bitwin braytnɛs we pɔsin kin si frɔm di sɛnt to di ed ɛn i kin sɔpɔt wan say we gɛt layt we klin.
Bikɔs LED dɛn de along di panɛl edj pas fɔ de dairekt biɛn di ful layt eria, wan LGP kin sɔpɔt tin layt bɔks dɛn, displei panɛl dɛn ɛn akitekchral laytin asɛmbli dɛn.
Laser dot density kin modify akɔs difrɛn eria dɛn na di sem plet fɔ kɔmpɛns fɔ layt atenueshɔn ɛn mit di prɔjek-spɛsifi k iluminɛshɔn rikwaymɛnt dɛn.
di spεsifi k klia PMMA mεtirial de gi layt transmitans we de rich 93%. Dis valyu de tɔk bɔt di akrilik matirial insɛf; finished-system braytnes ɛn optik efyushɔn bak dipen pan LED, dɔt patɛn, dimɛnshɔn, riflɛkta ɛn difyuza kɔnfigyushɔn.
Panɛl dimɛnshɔn, shep, ol, slot, notch ɛn polish edj dɛn kin kɔstɔmayz akɔdin to di kɔstɔma drɔin ɛn asembli rikwaymɛnt.
Wallis de sɔpɔt ɔl tu di laser-dot ɛn V-cutting prɔsesin. Di aprɔpriet ɛkstrakshɔn strɔkchɔ dipen pan panɛl jɔyometri, laytin dairekshɔn ɛn di vijual ifɛkt we yu want.
| Kɔmpiashɔn | Laser Dɔt Prɔsesin | V-Kɔt Prɔsesin |
|---|---|---|
| Optik Struktrɔ | Maykrodɔt Matriks | Prɛsishɔn V-Shep Layn ɔ Grov dɛn |
| Patna Kɔntrol | Dot Density Kin Difrɛn Aks di Panɛl | Layn Dairekshɔn ɛn Spays kin Kastam |
| Di Tipik Yuz | Jɛnɛral Ɛj-Lit Layt Bɔks, Displei ɛn Panɛl dɛn | Projek dɛn we nid fɔ tek Dairekshɔn ɔ Layn-Bayz Ɛkstrakshɔn |
| Selekshɔn we dɛn kin pik | Bays pan Panel Sayz, LED Arenjmɛnt ɛn Yunifɔmiti Target | Bays pan Optik Dairekshɔn ɛn Mɛkanikal Dizayn |
Laser-dot LGP dɛn kin sheb ed-mounted LED layt biɛn posta, grafik, mɛnyu bod ɛn advatayzmɛnt displei dɛn we dɛn de sɔpɔt wan rili slim layt-bɔks strɔkchɔ.
Customized acrylic LGPs kin intagret insay shelf, shokes, kabinet ɛn merchandising fixtures usay dɛn nid wan tin layt surface.
Layt gayd plet dɛn we gɛt edj kin sɔpɔt menyu bod dɛn we gɛt ivin layt, infɔmeshɔn sayn dɛn ɛn dairekshɔn grafik dɛn na rɛstɔrant dɛn, shopin sɛnta dɛn ɛn pɔblik ples dɛn.
PMMA Dɛn kin put LGP dɛn insay tin siling panɛl dɛn, di wɔl ficha dɛn we gɛt layt, fɔnicha ɛn ɔda akitɔk layt asɛmbli dɛn.
Big-fɔmat displei sistem dɛn kin yuz kɔstɔmayz LGP dɛn usay dɛn dɔn ɛnjinia di prɔjek dimɛnshɔn, LED plesmɛnt ɛn optik kɔnfigyushɔn fɔ di spɛshal freym.
Kastomiz layt gayd plet dɛn kin evalyu bak fɔ spɛshal displei mɔdyul dɛn, kɔntrol panɛl dɛn ɛn ɔda aplikeshɔn dɛn we nid fɔ kɔntrol layt ɛkstrakshɔn frɔm wan ed-lit ɔptik plet.
Kɔmɛshɔnal Layt Aplikeshɔn dɛn
Aplikeshɔn fɔ Layt fɔ Akitekchɔral
Mɛkanikal dimɛnshɔn dɛn impɔtant jɔs lɛk optik pefɔmɛns we LGP fɔ fit insay wan layt-bɔks freym ɔ LED asɛmbli we dɔn de.
Finished length ɛn width kin prosɛs akɔdin to di kɔstɔma drɔin insay di avaylabl raw-material dimɛnshɔn ɛn manufakchurin kapabiliti.
CNC mashin kin yuz fɔ prodyuz kɔstɔmayz ɔda profayl, slot, rɛs ɛn ɔda mɛkanikal ficha dɛn we di layt asɛmbli nid.
Dɛn kin put ol dɛn fɔ put ɛn ɔda opin dɛn akɔdin to di drɔin dɛn, if dɛn nɔ ambɔg di say dɛn we impɔtant fɔ gayd layt.
Layt-input edj dɛn kin polish fɔ impɔtant optik kɔpl, we nɔ-input edj dɛn kin prosɛs akɔdin to di fayn riflɛkta ɛn freym dizayn.
Wit wan listed MOQ of wan pies, wan prototype kin evaluet wit di intended LED strips, riflekta, diffuser ɛn mɛkanikal freym bifo big prodakshɔn kwantiti dɛn kɔnfɔm.
Layt gayd plet na di optik PMMA komponent insay wan ed-lit laytin sistem. I nɔ fɔ trit am ɔtomɛtik wan lɛk di kɔmplit LED panɛl layt.
Wan kɔmplit layt asɛmbli kin nid bak LED strip ɔ modul, riflɛkta matirial, difyuza shit, wan aluminiɔm freym, waya, pawa saplai ɛn mawntin kɔmpɔnɛnt dɛn. If yu projɛkt nid mɔ pas di akrilik LGP we dɛn dɔn prosɛs, spɛsifa di kɔmplit asɛmbli rikwaymɛnt dɛn we yu de aks fɔ kot.
Fɔ wan kɔstɔm laser-dɔt LGP, fɔ gi optik ɛn mɛkanikal infɔmeshɔn togɛda de ɛp fɔ ridyus ripit rivishɔn ɛn impruv di prɔjek ɛvalueshɔn.
Kwantiti we dɛn nid
Finished lɔng ɛn waid
Rikwayd PMMA tiknes
CAD ɔ dimɛnshɔn drɔin
LED strip ɔ LED modul spesifikeshɔn
LED pitch ɛn pakej dimɛnshɔn dɛn
Nɔmba ɛn di say we layt-input ed dɛn de
Singl-sayd ɔ tu-sayd layt ɔtput
Laser dot ɔ V-kɔt prɛfɛshɔn
Hol, slot ɔ kɔstɔm shep dɛn we dɛn nid
Riflɛkta ɛn difyuza kɔnfigyushɔn, if dɛn no
Bare LGP plet ɔ kɔmplit laytin asɛmbli rikwaymɛnt
Target aplikeshɔn ɛn instɔleshɔn ɛnvayrɔmɛnt
Laser dot patɛn kin kɔstɔmayz akɔdin to panɛl dimɛnshɔn, LED plesmɛnt, layt-input dairekshɔn ɛn di eria we dɛn nid we gɛt layt.
Bɔku PMMA tiknes opshɔn dɛn de alaw di LGP fɔ mach to difrɛn LED pakej dɛn, panɛl dimɛnshɔn dɛn ɛn strɔkchɔral rikwaymɛnt dɛn.
CNC kot, drilin, kɔstɔmayz shep ɛn ed polish kin kam togɛda wit di optik dɔt patɛn akɔdin to di kɔstɔma drɔin.
Di list MOQ fɔ wan pis alaw bayer fɔ evalyu kɔstɔmayz sampul bifo kɔnfɔm big prodakshɔn rikwaymɛnt.
Wallis de sɔpɔt kɔstɔmayz LGP prɔjek fɔ LED layt manifakta, layt-bɔks manifakta, sayn kɔmni, displei saplay, rital-fiks kɔmni ɛn ɔda kɔmɛshɔnal bayer.
Kastom LGP projɛkt dɛn kin inklud PMMA kɔt, laser-dɔt prɔsesin, V-kɔt, CNC fabrikeshɔn, ed polish, klin, inspekshɔn ɛn protɛktiv ɛkspɔt pak akɔdin to di kɔnfyus ɔda spɛsifikɛshɔn.
PMMA layt gayd plet na optik akrilik panɛl we dɛn mek fɔ gɛt LED layt frɔm wan ɔ mɔ ed ɛn fɔ sheb da layt de akɔdin to big say tru laser dɔt, layn dɛn we dɛn rayt ɔ ɔda layt-ɛkstrakshɔn strɔkchɔ dɛn.
Yɛs. Insay dis prodak kategori, LGP tinap fɔ Layt Gayd Plɛt. 'LPG' insay akrilik laytin prodak taytul na nɔmal wan transpɔzishɔn fɔ di lɛta dɛn ɛn dɛn fɔ kɔrɛkt am to LGP fɔ tɛknikal akkuracy ɛn sɔch rilevans.
Layt de travul tru di PMMA frɔm di LED ed. Laser dɔt dɛn kin ambɔg di layt we dɛn de gayd ɛn pul di pat dɛn we dɛn kin kɔntrol tru di panɛl sɔfays. Fɔ ajɔst di dɔt dɛnsiti akɔdin to di plet de ɛp fɔ kɔmpɛns di layt intɛnsity we de dɔŋ fa frɔm di LED dɛn.
Wallis list tiknes frɔm 3 mm to 12 mm fɔ dis prodak. Di tik we fit dipen pan di panɛl saiz, di LED pakej dimɛnshɔn, layt-travul distans ɛn di strɔkchɔral rikwaymɛnt dɛn.
Nɔ. Di valyu we dɛn rayt de tɔk bɔt layt transmishɔn fɔ di klia PMMA matirial we dɛn dɔn spɛsifa. Finished sistem efyushɔn ɛn braytnɛs bak dipen pan LED kɔpl, panɛl dimɛnshɔn, dɔt patɛn, riflɛkta, difyuza ɛn ɔda optik lɔs.
Yɛs. Dot density kin mach to di finish LGP saiz, PMMA tiknes, LED posishun, LED pitch, nomba of iluminated edj en rikwayd lait-emitin dairekshon.
Laser-dot prɔsesin de yuz matris fɔ maykrodɔt fɔ pul layt akɔdin to di panɛl, we V-kɔt de yuz linya grov. Selekshɔn dipen pan panɛl jɔyometri, layt dairekshɔn ɛn di optik ifɛkt we yu want.
Bɔku singl-sayd ed-lit sistem dɛn de yuz wan riflɛkta biɛn di LGP fɔ ridayrɛkt layt to di say we dɛn de si. Transparent dabl-sayd aplikeshɔn dɛn kin yuz difrɛn optik strɔkchɔ, so di kɔmplit asɛmbli fɔ ɛvaluet akɔdin to di autput we dɛn want.
Wan smol, transparent layt-input edj de ɛp LED layt fɔ kɔpl insay di akrilik mɔ efyushɔn. Di ed dɛn we rɔf ɔ we dɔn pwɛl kin mek di skata we yu nɔ want ɛn di optik lɔs go ɔp.
Yɛs. Dipen pan di panɛl dimɛnshɔn ɛn di braytnɛs we dɛn nid, dɛn kin put LED dɛn na tu ɔ mɔ ed dɛn. Di laser-dot layout fɔ dɔn disayn rawnd di input-edj kɔnfigyushɔn we dɛn dɔn pik.
Yɛs. CNC kot, drilin, kɔstɔmayz profayl, slot ɛn ed prɔsesin kin tɔk bɔt akɔdin to di kɔstɔma drɔin ɛn di optik rikwaymɛnt dɛn fɔ di panɛl.
Di kor prodak we dεn dεskrεb ya na wan prכsεs PMMA akrilik layt gayd plet. If LED, riflekta shit, difyuza shit, freym, waya ɔ ɔda kɔmpɔnɛnt dɛn nid, list dɛn sɛpret so dat dɛn go kɔnfɔm di kɔmplit asɛmbli skɔp.
Di MOQ we de na di list naw na wan pat, we de alaw di wan dɛn we de bay fɔ evalyu wan kɔstɔmayz protɔtayp bifo dɛn kɔmit to wan big prodakshɔn ɔda.
Di infɔmeshɔn bɔt di prɔdak we de naw de list lɛk 3–7 wok dez fɔ sampul ɛn lɛk 2–5 wik fɔ mas prodakshɔn, dipen pan kwantiti ɛn kɔstɔmayshɔn. Faynal lida tɛm fɔ kɔnfɔm bak wit di projɛkt kot.
Duya gi kwantiti, dimɛnshɔn we dɔn dɔn, tiknes, CAD drɔin, LED mɔdel ɔ strip spɛsifikɛshɔn, LED pitch, nɔmba fɔ di ed dɛn we gɛt layt, ɔtput dairekshɔn, laser-dɔt ɔ V-kat prɛferɛns ɛn ɛni ol, slɔt ɔ ɔda mashin rikwaymɛnt.
Yu de luk fɔ kɔstɔm laser dot akrilik layt gayd plet, PMMA LGP ɔ ed-lit LED layt gayd panɛl ? Send Wallis yu panɛl drɔin, tiknɛs, LED spɛsifikɛshɔn, iluminated-edj kɔnfigyushɔn ɛn kwantiti fɔ optik ɛn manufakchurin ɛvalueshɔn.
