|
Wallis - PVC shit
Wallis bin de tɔk bɔt am
PVC shit
| Kɔlɔ: | |
|---|---|
| Kwantiti: . | |
Wallis de saplae dabl-sayd adhesive PVC albom shit fɔ fotobuk, flush-maunt albɔm ɛn profeshɔnal foto albɔm prodakshɔn. Di PVC insay pej dɛn kɔt wit prɛshɔn-sɛnsitiv adeziv na ɔl tu di say dɛn ɛn dɛn protɛkt am wit rilis layna dɛn, we de alaw fɔ put foto dɛn we dɛn print ɔ foto pepa we dɛn nɔ put sɛpret likwid glu we dɛn de gɛda di albam.
Di matirial na fɔ albam faktri, fotobuk manifakta, foto laboratori, printin kɔmni ɛn prayvet-lɛbul foto prodak brand dɛn we nid kɔnsistɛns pej tik, klin adeziv sɔfays, rili foto mawntin ɛn efishɔnal batch prodakshɔn.
Shit saiz, PVC tiknes, surface finish, rilis layna, adhesive rikwaymɛnt ɛn pakej kin tɔk bɔt akɔdin to di finish albɔm fɔmat ɛn prodakshɔn wokflɔ. I fayn fɔ mek dɛn du fizik tɛst bifo bɔku bɔku prodakshɔn bikɔs di bonding pefɔmɛns dipen pan ɔl tu di adeziv sistɛm ɛn di foto pepa ɔ print midia we dɛn de mawnt.
Dɔbul-sayd sɛlf-adhesive PVC albɔm sheet na insay-pej matirial we dɛn kin yuz fɔ bil foto albam ɛn fotobuk. Di PVC kor de gi pej strɔkchɔ, we prɛshɔn-sɛnsitiv adeziv na ɔl tu di say dɛn de alaw fɔ mawnt foto pepa ɔ print foto dɛn dairekt pan di pej.
Bifo yu yuz am, ɛni wan we de adhesive, dɛn kin yuz wan rilis layna fɔ protɛkt am. We dɛn de mek di albam, di pɔsin we de wok de pul di layna, put di foto we dɛn print ɛn put prɛshɔn fɔ mek di bond.
Dis kɔnstrɔkshɔn rili yusful fɔ flush-mount fotobuk dɛn , usay dɛn kin put foto dɛn we dɛn print pan insay pej dɛn we rili rigid fɔ mek dɛn mek tik, flat prɛmiɔm albam spred dɛn.
Di kɔrɛkt spɛsifikɛshɔn dipen pan di albɔm-pej stiffness we yu want, di buk tik we yu dɔn dɔn, foto-pepa tayp, binding kɔnstrɔkshɔn ɛn mawntin prɔses. So dɛn fɔ kɔnfyus di las valyu dɛn fɔ ɛni fotobuk prɔjek.
| Sɔntin | Dabl-Sayd Adhesive PVC Fɔto Albam Insay Shit |
| Base Material | PVC |
| Adhesive Kɔnstrɔkshɔn | Adhesive we de mek pɔsin gɛt prɛshɔn na ɔl tu di say dɛn; fainal adhesive spesifikeshɔn sɔbjɛkt to kɔnfɔmeshɔn |
| Rilis Layna | Protektiv rilis matirial pan adhesive surfaces; layna tayp ɛn rilis fɔs kin tɔk bɔt akɔdin to prodakshɔn rikwaymɛnt |
| Tik we i tik | Customized akɔdin to rikwayd pej stiffness, finish albɔm tiknes ɛn prodakshɔn we |
| Sayz fɔ di Shit | Customized akɔdin to albam saiz, print fɔmat ɛn kɔt layout |
| Sho | Smɔl PVC sɔfays; projɛkt-spɛsifi k mat, glos ɔ ɔda finish rikwaymɛnt dɛn kin tɔk bɔt |
| Kɔlɔ | Transparent prodakt kɔnfigyushɔn we dɛn sho na dis pej; ɔda albam-pej kɔlɔ dɛn we de ɔnda di spɛsifikɛshɔn kɔnfɔmeshɔn |
| Di we aw dɛn de du di wok | Shit kɔt, trim, mawnt ɛn albɔm-pej kɔnvɔyt |
| Aplikeshɔn dɛn | Flush-mount fotobuk, mared albam, studio albam, bebi albam, famili albam, sampul buk ɛn foto prodak we dɛn kɔstɔmayz |
| Tayp fɔ di Sapɔt | OEM , ɔlsay ɛn bɔlk saplai fɔ albam manifakta ɛn printin kɔmni dɛn |
Fɔ fotobuk faktri dɛm, di PVC kɔr na wan pat nɔmɔ pan di prɔdak. Adhesive kɔnsistɛns ɛn rilis-layn pefɔmɛns gɛt dairekt ifɛkt pan mawntin efyushɔn, pej apia ɛn riwɔk rit.
Yunifɔm adhesive coating de ɛp fɔ ridyus eria dɛn we wik bonding ɛn visible surface irregularities afta di foto dɔn mawnt. Uneven adhesive application kin kontribyut to bubbles, lifting or inkonsistent pej apinans.
Adhesive tak fɔ mach di kɔstɔma in mawntin wokflɔ. If yu tek di fɔs tak we yu de agresiv pasmak, dat kin mek i nɔ izi fɔ mek yu ebul fɔ posishun, we if yu nɔ tek yu inɔf tak, dat kin mek yu gɛt mɔ prɔblɛm fɔ es ɔ fɔ mek yu nɔ kɔmplit.
Di rilis layna fɔ peel kɔnsistɛntli we i nɔ pul adeziv kɔmɔt na di PVC sɔfa ɔ mek di prodakshɔn dilɛys we nɔ nid. Rilis fɔs fɔ bi di rayt fɔ ɔl tu di manual ɛn sɛmi-ɔtomɛtik albɔm manufakchurin.
Dɔst, fayv, adhesive particles ɛn ɔda tin dɛn we gɛt dɔti kin kam fɔ si ɔnda smol smol smol foto print. So klin kɔtin, kɔnvɔyt, pak ɛn handel impɔtant fɔ prɛmiɔm fotobuk prodakshɔn.
Bikɔs dɛn dɔn ɔlrɛdi put adeziv na ɔl tu di say dɛn na di PVC sheet, di wan dɛn we de mek di albam kin pul wan sɛpret stɛp we dɛn kin yuz fɔ kɔt glu we dɛn de gɛda di pej. Dis kin mek di prodakshɔn wokflɔ simpul ɛn ridyus di we aw dɛn de handle wet adeziv.
Di PVC kor de gi kontrכl pej tiknes bitwin mכunt fכtografik print, εp fכ mek di sכbstanshal pej fil fכ asosiet wit prכfεshכnal flush-maunt mared εn stכdiכ albam.
Difrɛn PVC tiknes dɛn kin evalyu akɔdin to di pej stiffness we yu want, albɔm wet ɛn totɛl buk tiknes. Wan prɛmiɔm albam wit smɔl nɔmba fɔ spred kin yuz difrɛn kɔr spɛsifikɛshɔn frɔm wan ay-pej-kɔnt fotobuk.
Fɔ kɔt di PVC klos to di rikwayd finished spred dimɛnshɔn kin ridyus trim ɛn impruv matirial yutilizeshɔn fɔ albɔm faktri dɛn we de prodyuz standad prodak rɛnj.
We di adeziv, PVC kɔr ɛn fotograf print mach fayn, di layt kɔnstrɔkshɔn kin gi klin pej ed ɛn stebul prɛmiɔm-albam apinans.
Tiknes fɔ pik akɔdin to di kɔmplit albɔm dizayn pas fɔ pik di tik we de PVC . We di sheet tik mɔ, dat kin mek di pej stiff mɔ, bɔt i kin mek di buk we dɛn dɔn dɔn tik ɛn wet bak.
Albɔm dɛn we gɛt bɔku spred kin tik pasmak ɔ ebi if dɛn pik wan tik PVC kɔr we nɔ nid. So dɛn fɔ tink bɔt di pej kɔnt togɛda wit di tik we di kɔr gɛt.
Di las pej na laminated strɔkchɔ we gɛt fotograf midia, adeziv ɛn PVC . Tik foto pepa de inkrisayz di totɛl pej kalipa ɛn dɛn fɔ put am insay we dɛn de evalyu di albam we dɔn dɔn.
Flush-mount, lay-flat ɛn ɔda prɔfɛshɔnal albɔm kɔnstrɔkshɔn dɛn kin gɛt difrɛn rikwaymɛnt fɔ pej tik nia di spayna. Baya dɛn fɔ gi di binding fɔmat we dɛn de pik di PVC kɔr.
Dɛn kin rɛkɔmɛnd fɔ tek fizik sɛmpul bikɔs di kwaliti we dɛn kin si se di pej kin dipen pan di stiffness, wet, surface flatness ɛn di fotograf midia as kɔmplit strɔkchɔ, nɔto di PVC tiknes nɔmɔ.
Prɛshɔn-sɛnsitiv adhesive pefɔmɛns kin difrɛn akɔdin to di sɔfays we dɛn de bon. Glɔs foto pepa, mat pepa, dijital print we dɛn kɔt ɛn spɛshal print midia kin gɛt difrɛn sɔfayz ɛnaji ɛn kɔtin.
Smɔl glos sɔfays dɛn nid fɔ rili wet-ɔut frɔm di adeziv fɔ gɛt wan yunifom bon. Sampul tɛst fɔ chɛk fɔ liftin, edj separeshɔn ɛn bɔbul dɛn we pɔsin kin si.
Tekstur ɔ porous kɔtin kin chenj di ifɛktiv kɔntakt eria bitwin di print ɛn adhesive. Dɛn fɔ evalyu di trɛnk we di pil strɔng ɛn aw i luk bay we dɛn yuz di aktual pepa we dɛn pik fɔ mek dɛn prodyuz.
Tona, inkjet riseptiv kɔtin, laminat ɛn protɛktiv varnish kin afɛkt adheshon. Di wan dɛn we de mek di albam fɔ tɛst di print sheet dɛn we dɔn dɔn afta di nɔmal printin, drying ɛn curing prɔses.
Prɛmiɔm fotobuk dɛn kin yuz big smol smol say dɛn we dɛn print usay smɔl smɔl tin dɛn we nɔ fayn kin bi pɔsin we pɔsin kin si. Fɔ dis rizin, fɔ flat ɛn klin na impɔtant kwaliti kɔnsidareshɔn apat frɔm di trɛnk we di adhesive gɛt.
Stebul flatnɛs de ɛp foto dɛn fɔ mawnt ivin ɛn i kin ridyus distorshɔn akɔdin to big albam spred. Dɛn fɔ kip ɛn transpɔt di tin dɛn we dɛn nɔ fɔ bɛn ɔ prɛs pasmak.
Rilis layna dɛn de ɛp fɔ protɛkt di adhesive surface bifo yu yuz am. Layna dɛn fɔ de na dɛn ples te dɛn put am fɔ mek dɛn nɔ gɛt dɔst, fayv ɛn finga prɛnt dɛn we de na di ays.
Di we aw dɛn de kɔt fɔ mek dɛn nɔ gɛt bɔku tin dɛn we nɔ gɛt bɛtɛ tin fɔ it ɛn di ed dɛn we rɔf bikɔs dɔti kin dɔti di tin dɛn we de adhesive ɔ i kin trɔp ɔnda di foto we dɛn dɔn mawnt.
Dɛn kin mek albam dɛn we dɛn kin yuz fɔ flush bay we dɛn kin put foto dɛn we dɛn print pan wan pej kɔr we nɔ rili strɔng. Di kɔnstrɔkshɔn de mek tik tik prɛmiɔm pej dɛn ɛn alaw foto dɛn fɔ ɛkstɛnd akɔdin to big spred dɛn dipen pan di albam dizayn.
Prɔfɛshɔnal mared styudio ɛn albam manifakta dɛn kin yuz sɛlf-adhesive PVC kɔr fɔ prɛmiɔm mared buk dɛn we nid fayn pej ɛn big foto spred.
Portret studio kin prodyuz kɔstɔmayz albam wit difrɛn pej dimɛnshɔn, kɔr tiknɛs ɛn foto layout akɔdin to dɛn prodak rɛnj.
Dɛn kin yuz sɛlf-adhesive albam pej dɛn bak fɔ famili, bebi, gradyueshɔn ɛn mɛmorial fotobuk dɛn we dɛn mek wit pɔshɔnal usay dɛn want fɔ mek bɔku pej kɔnstrɔkshɔn.
Fɔtografi styudio, printa ɛn matirial saplay dɛn kin yuz di sem kɔnstrɔkshɔn fɔ sampul buk, pɔtfolio, prɛzɛntɛnshɔn albɔm ɛn prodak displei buk.
Dis prodak fɔ spɛsifa akɔdin to di we aw dɛn want fɔ yuz am. Wan self-adhesive PVC fotobuk pej kin fayn fɔ kɔmɛshɔnal albɔm mek, bɔt dis nɔ min ɔtomɛtik se i kwalifay as arkival prɛzɛvɛshɔn matirial.
Fɔ mared albɔm, stɔdi buk ɛn kɔmɛshɔnal fotobuk, pipul dɛn we de bay kin pe atɛnshɔn mɔ pan pej stiffness, adhesive pefɔmɛns, apinans, prodakshɔn efyushɔn ɛn finish-buk durability.
Miusiɔm, arkiv ɛn prɔjek dɛn we nid fɔ kip di gred we dɛn de kip fɔ difayn patikyula matirial ɛn foto-sefty rikwaymɛnt dɛn. Nɔ tink se PVC kɔr ɔ prɛshɔn-sɛnsitiv adeziv na arkival-sef if yu nɔ gɛt di rayt tɛst ɛn dɔkyumentri.
If yu kɔstɔma nid fɔ gɛt asid-fri, PAT-tɛst, arkival ɔ ɔda prɛzɛvɛshɔn-rilayt pefɔmɛns, gi di ɛksaktɔl standad we yu nid bifo yu ɔda so dat dɛn go ebul fɔ rivyu di matirial suitability ɛn di dɔkyumɛnt dɛn we de.
Kip di wokbench fri frɔm dɔst, pepa fayv, adeziv rɛsɛdyu ɛn ɔda tin dɛn we kin trɔp ɔnda di foto.
Align di PVC kor akɔdin to di finish albɔm spred ɛn lɛf di rilis layna in ples te wantɛm bifo yu mawnt.
If yu pul di layna smɔl smɔl pas fɔ put di kɔmplit adhesive surface wan tɛm, dat kin ɛp fɔ ridyus di dɔst we de dɔti ɛn mek i izi fɔ put am.
Put di sheet we dɛn print fayn fayn wan bifo yu put ful prɛshɔn. Riposishכbiliti, if nid de, fכ kכnfכm fכ di adhesive we dεn sεlekt pas fכ asum.
Put yunifom prɛshɔn frɔm wan eria to di ɔpɔzit ed fɔ mek adhesive kɔntakt ɛn ridyus di briz we trɔp.
Tɔn di pej ɛn ripit di sem kɔntrol we yu de du fɔ di sɛkɔn foto print.
| Prodakshɔn Isyu | Fakta dɛn fɔ Chɛk |
|---|---|
| Fɔto edj we dɛn de lif | Adhesive kompitibiliti, mawntin prɛshɔn, print kɔtin, kɔntaminɛshɔn ɛn kondishɔn tɛm |
| Bɔbul dɛn we de kɔmɔt na di briz | Maunt teknik, adhesive coating konsistɛns, dɔst ɛn aplikeshɔn prɛshɔn |
| I nɔ izi fɔ pul di layna | Rilis fɔs, layna spɛsifikɛshɔn, stɔrɔj kɔndishɔn ɛn kɔt kwaliti |
| Partikul dɛn we pɔsin kin si ɔnda di foto | Prodakshɔn klin, kɔt dɔst, layna protɛkshɔn ɛn ɔpreshɔn handle |
| Pej we dɛn kin kɔl | PVC flatnɛs, foto-pepa balans, adhesive strɛs, stɔrɔj ɛn mawntin kɔnstrɔkshɔn |
| Album tu tik ɔ ebi | PVC kor tiknes, foto-pepa tiknes en nomba of spred |
Sεmpl tεst na strכng rεkomεnd fכ albam manifakta dεm biכs dεn nכ kin ebul fכ evaluate adheshon kכrekt wan frכm PVC spεsifikεshכn nכmכ. Di aktual print midia, adeziv, PVC tiknes ɛn prodakshɔn prɔses fɔ tɛst togɛda.
Maunt di aktual fotograf midia ɛn evalyu initial adheshon, edj liftin ɛn bond divɛlɔpmɛnt ɔnda ɛkspɛkt prodakshɔn ɛn stɔrɔj kɔndishɔn.
Inspek big say dɛn we dɛn print ɔnda nɔmal layt fɔ si if di briz dɔn trɔp, if i nɔ gɛt adhesive, if i gɛt dɔti ɛn if i gɛt prɔblɛm dɛn we de na di say we pɔsin kin si.
Kɔnfɛm se di ɔpreshɔn dɛn kin pul di layna ɔltɛm we dɛn nɔ gɛt bɔku pawa, te ɔ transfa adeziv away frɔm di PVC kɔr.
Prodyuz wan kɔmplit sampul albɔm fɔ evaluate buk tik, pej tɔn, flat, spayna bihayvya, stiffness ɛn ɔvala vijual apinans bifo yu apruv di fayn spɛsifikɛshɔn.
Yu kin pik tik akɔdin to di pej stiffness, foto-pepa tik, nɔmba fɔ di spred ɛn di target albam wet.
Di wan dɛn we de mek di albam kin gi di spred dimɛnshɔn dɛn we dɔn dɔn ɔ di layout dɛn we dɛn kin kɔt so dat dɛn kin tɔk bɔt di sayz dɛn we dɛn dɔn kɔstɔmayz di shit dɛn.
If di projɛkt nid spɛshal initial tak, peel trɛnk, ripɔzishɔn bihayv ɔ kɔmpitibliti wit wan patikyula foto pepa, gi di tɛknikal rikwaymɛnt ɔ di rifrɛns matirial we dɔn de fɔ ɛvalueshɔn.
Rilis layna rikwaymɛnt dɛn kin tɔk bɔt akɔdin to manual asɛmbli, kɔt prɔses ɛn prodakshɔn-layn hanlin. Di wan dɛn we de bay fɔ sho wetin dɛn lɛk fɔ pepa ɔ fim if dɛn dɔn ɔlrɛdi difayn am.
Yu kin ajɔst di we aw di wɔl tan ɛn di we aw dɛn mek di pej akɔdin to di stayl we dɛn want fɔ mek di fotobuk, if di tin dɛn we dɛn yuz ɛn di tin dɛn we dɛn kin adhesive go kɔmpit.
Dɛn kin tɔk bɔt aw fɔ pak am akɔdin to di sheet saiz, kwantiti, usay dɛn de go ɛn di protɛkshɔn we dɛn nid fɔ adhesive surfaces ɛn rilis liners.
Gi di pej we dɔn dɔn ɔ di spred dimɛnshɔn dɛn so dat dɛn go ebul fɔ ebul fɔ no di rayt sheet saiz.
Spɛsifik di tik we de naw ɔ gi wan albɔm pej sampul we dɔn de if yu nid fɔ mach wan patikyula stiffnɛs.
No if di print we dɛn dɔn mawnt na glos, mat, tɛkstɔr, inkjɛt, toner-based ɔ ɔda kɔt fɔ tek pikchɔ.
Tɛl Wallis if di prɔjek nid fɔ gɛt pɔrmanent bonin, wan difayn pozishɔn winda ɔ ɔda prɛshɔn-sɛnsitiv adhesive kwaliti.
Gi ɛni layna-matirial, rilis-fɔs ɔ prodakshɔn-hanlin rikwaymɛnt we yu albam faktri dɔn ɔlrɛdi yuz.
Pej kɔnt de ɛp fɔ ebul fɔ no if di PVC kɔr we yu dɔn pik go mek di tik ɛn wet we yu want fɔ dɔn-buk.
Inklud sampul kwantiti, trayal ɔda, ɛkspɛkt bɔlk kwantiti ɛn ripit pɔyzin volyum usay i de.
Dabl-sayd adeziv PVC sheet dɛn fɔ kɔntinyu fɔ protɛkt frɔm dɔst, kɔntaminɛshɔn, ɔt pasmak, dairekt san layt ɛn prɛshɔn we nɔ nid we dɛn de kip ɛn transpɔt.
Rilis layna dɛn fɔ de intakt te dɛn yuz am fɔ protɛkt di adhesive coating. Di albam faktri dɛn fɔ kip di sheet dɛn flat ɛn alaw di matirial dɛn fɔ kɔndishɔn to di prodakshɔn ɛnvayrɔmɛnt bifo dɛn mawnt dɛn we big big tɛmpracha difrɛns de bitwin di say dɛn we dɛn de kip ɛn di wokshɔp.
Wallis de saplae kɔstɔmayz PVC matirial fɔ intanashɔnal B2B kɔstɔma dɛn ɛn i kin tɔk bɔt foto albɔm shit rikwaymɛnt dɛn akɔdin to pej dimɛnshɔn, tik, adeziv pefɔmɛns, rilis layna ɛn bay volyum.
Dabl-sayd adhesive PVC sheet fɔ profeshɔnal fotobuk prodakshɔn
Kastom tiknes ɛn sheet dimɛnshɔn dɛn
Adhesive ɛn rilis-layn rikwaymɛnt dɛn we de ɔnda di prɔjek kɔnfɔmeshɔn
Sampul tɛst wit kɔstɔma foto pepa
OEM ɛn bɔlk saplai sɔpɔt
Ekspɔt pak fɔ intanashɔnal ɔda
Na PVC insay-pej matirial we dɛn kɔt wit prɛshɔn-sɛnsitiv adeziv na ɔl tu di say dɛn. Rilis layna dɛn de protɛkt di adeziv te dɛn put foto ɔ foto pepa we dɛn print we dɛn de mek fotobuk.
Yɛs. Dɛn kin yuz dabl-sayd sɛlf-adhesive PVC albɔm shit, prɛshɔn-sɛnsitiv PVC insay pej ɛn adhesive PVC fotobuk shit fɔ diskrayb dis kayn albam-mɛkin matirial.
Nɔ ɔda likwid glu nɔ kin nid bikɔs dɛn dɔn ɔlrɛdi kɔt di adeziv pan ɔl tu di say dɛn na di PVC sheet. Dɛn kin pul di rilis layna wantɛm wantɛm bifo dɛn put di foto.
Di kɔrɛkt tik dipen pan di pej stiffness we yu want, di nɔmba fɔ di albam spred, foto-pepa tik ɛn di totɛl finish buk wet. I rεkomεnd fכ kכmpεr fכshal sεmpl dεm bifo bכlk prodakshכn.
Yɛs. Dɛn kin tɔk bɔt di dimɛnshɔn dɛn fɔ di shit akɔdin to di saiz we dɛn dɔn dɔn fɔ tek di fotobuk, layout fɔ kɔt di prodakshɔn ɛn di kwantiti we dɛn bay.
Dɛn kin tɔk bɔt di tin dɛn we dɛn nid fɔ du fɔ di prɔjɛkt. Di wan dɛn we de bay fɔ gi di kayn foto-pepa ɛn di bonding bihayvya we dɛn nid so dat dɛn go ebul fɔ evaluate di sampul kɔmpatibiliti.
Rilis-layn rikwaymɛnt dɛn kin kɔstɔmayz ɔ pik akɔdin to di manufakchurin prɔses, ɔnda di fayn prodak spesifikeshɔn. If yu prodakshɔn layn dɔn ɔlrɛdi yuz wan patikyula layna tayp, put am wit di kot rikwest.
Ripɔzisibiliti dipen pan di prɛshɔn-sɛnsitiv adeziv we yu dɔn pik ɛn di say we di foto pepa de. Nɔ tink se ɛvri adhesive gred na ripɔzishɔn. Test di intended matirial kɔmbayn bifo prodakshɔn.
Bכbul kin kכmכt frכm dכst, prεshכn we nכ ivin, tεknik fכ mכunt, adhesive irregularities כ surface incompatibility. If yu pul di layna smɔl smɔl ɛn yu de kɔntrol di prɛshɔn, dat kin ɛp fɔ ridyus di briz we dɔn trɔp.
Kompatibiliti dipen pan di surface coating of di fotograf midia. Glossy, mat, textured, inkjet ɛn toner-based print dɛn fɔ evalyu yuz aktual prodakshɔn sɛmpul dɛn.
Nɔ tek am se PVC ɛn prɛshɔn-sɛnsitiv adeziv kɔnstrɔkshɔn na arkival ɔ kɔnsavayshɔn gred pas nɔmɔ dɛn dɔn tɛst di ɛksaktɔl matirial to di prɛzɛvɛshɔn standad we di kɔstɔma nid. Projek dɛn we nid PAT, ISO 18902 ɔ ɔda foto-stɔrɔj krayteria fɔ gi dɛn tin dɛn de bifo dɛn ɔda.
I kin evalyu fɔ mared, pɔtrɛt, styudio ɛn ɔda kɔmɛshɔnal flush-maunt fotobuk aplikeshɔn usay dɛn nid fɔ gɛt sɛlf-adhesive PVC insay kɔr.
I fayn fɔ mek dɛn du sampul tɛst so dat di wan dɛn we de bay kin ebul fɔ evalyu di tik, stiffness, adhesive bihayvya, layna rilis, foto-pepa kɔmpatibiliti ɛn finish albɔm apinans bifo dɛn kɔnfɔm kɔmɛshɔnal prodakshɔn.
Duya gi di shit dimɛnshɔn dɛn we yu nid, PVC tiknes, foto-pepa tayp, adhesive rikwaymɛnt, rilis-layn prɛferɛns, finish albɔm saiz, nɔmba fɔ spred, sampul rikwaymɛnt ɛn ɛstimat kwantiti fɔ bay.
Send Wallis yu albam saiz, PVC tiknes, foto-pepa tayp, adhesive rikwaymɛnt, rilis-layn prɛferɛns ɛn ɛkspɛkt fɔ bay kwantiti. Wi kin tɔk bɔt dabl-sayd adeziv PVC insay pej dɛn fɔ fotobuk, flush-maunt albɔm ɛn pɔshɔnal foto albɔm prodakshɔn.
If yu de riples wan albɔm-shit spɔlayt we dɔn de, sɛn wan fizik rɛfrɛns sɛmpul ɔ kɔrɛnt tɛknikal spɛsifikɛshɔn so dat dɛn go ebul fɔ evalyu tik, stiffnɛs, layna rilis ɛn adhesive pefɔmɛns.
