|
PVC PE PVDC we yu de yuz
WALLIS
| Material: | |
|---|---|
| Kɔlɔ: | |
| advantej: | |
| Kwantiti: | |
Wallis de saplae ay-baria PVC/PE/PVDC famasitik pak film ɛn rigid shit fɔ thermoformed blister pak, tablɛt, kapsul, sɔft jel, nyutrasiutik ɛn ɔda mɔstɔ- ɔ ɔksijɛn-sɛnsitiv sɔlid-dos prodak dɛm. Di multilayer strɔkchɔ kɔba PVC thermoforming sɔpɔt, wan PE funkshɔnal layt ɛn wan PVDC barɛri kɔtin fɔ gi impɔtant fɔmabiliti, silin pefɔmɛns ɛn protɛkshɔn agens mɔstɔ ɛn ɔksijɛn transmishɔn.
We yu kɔmpia am wit standad PVC ɔ kɔvɛnshɔnal PVC/PVDC strɔkchɔ, di adishɔnal PE layt kin impruv fleksibiliti ɛn prɔsesin pefɔmɛns fɔ sɛlɛkɛt dip ɔ wayd blista kaviti dɛn we i de gi bak wan fɛnshɔnal silin intafɛs insay pak sistɛm dɛn we dɛn dɔn disayn fayn fayn wan.
Wallis naw de gi totכl tiknes we de arawnd 50–400 μm , PVDC kכt wet we de arawnd 60–120 g/m² , ɛn tipik wit dɛn we na lɛk 250–350 mm , wit kɔstɔmayz strɔkchɔ, wit, kɔlɔ ɛn rol kɔnfigyushɔn dɛn we de ɔnda prodakshɔn kɔnfɔmeshɔn.
Fɔ yuz famasi, di fayn strɔkchɔ fɔ pik akɔdin to di drɔg in mɔstɔ ɛn ɔksijɛn sɛnsitiviti, target WVTR ɛn OTR, blista kaviti jɔyometri, fɔm kɔndishɔn, lidin matirial, silin winda, stebiliti program ɛn dɛstineshɔn-maket rigyuletɔri rikwaymɛnt.
PVC/PE/PVDC na wan multilayer thermoformable famasitik pak strɔkchɔ we dɛn mek fɔ kɔba di prɔsesin advantej dɛn fɔ tri difrɛn polima layers. insted fכ nid wan polimכr fכ gi rigiditi, fleksibiliti, sial εn barεri pεrformεns wan tεm, εvri layεr de du difrεnt fכnshכn.
Rigid PVC de gi dimɛnshɔnal stebiliti ɛn di praymar thermoforming strɔkchɔ. i de alaw fכ hεt di wεb εn fכm insay fכmasyutik blista kεviti dεm we i de gi di stiffness we nid fכ dכwnstrim pak כpεreshכn dεm.
di PE layεr de introdכks adishכnal fleksibiliti εn i kin impruv prכsεsin kכntribyushכn in mכltilayεr blista kכnstrכkshכn dεm. dipכnt pan di spεsifi k strכkchכ, PE kin fכnshכn bak lεk silin intafεys wit kכmpatibl lid mεtirial dεm.
PVDC de gi di prinsipal ay-baria fכnshכn bay we i de ridyus wata-vapour, כksijεn εn gas transmishכn. di wet we di kכt de kכt dεn kin ajɔst akɔdin to di barεri tכgεt, bכt di fainal pεrformεns de dipכnt bak pan PVDC fכmyuleshכn, kכt yunifכmiti, fכm kכndishכn εn finish blista jכmetri.
Di valyu dɛn we de dɔŋ ya de sho di tipik spɛsifikɛshɔn dɛn we gɛt fɔ du wit dis Wallis prodak naw. Faynal dimɛnshɔnal tolɛreshɔn, layt rɛsɛshɔn, barɛri pefɔmɛns ɛn rol kɔnfigyushɔn fɔ kɔnfɔm fɔ ɛni famasitik prɔjek.
| Paramita | Tipik Spɛsifikeshɔn / Notis dɛn |
|---|---|
| Sɔntin | PVC/PE/PVDC High-Barrier Famasiutik Blista Film |
| Matirial Strukchɔ | PVC / PE / PVDC multilayer kompoziyt |
| Tɔtɔl Tiknɛs | Na lɛk 50–400 μm; we dɛn kɔstɔmayz akɔdin to wetin di prɔjek nid |
| PVDC Kotin Weyt we yu kin yuz | Na lɛk 60–120 g/m²; fainal selekshɔn akɔdin to di barɛri target |
| Tipik Width we dɛn kin yuz | Na lɛk 250–350 mm; kɔstɔmayz width dɛn we de ɔnda prodakshɔn kɔnfɔmeshɔn |
| Fɔmat fɔ di Sapɔt | Rol dɛn |
| Kɔlɔ | Transparent, tinted ɛn kɔstɔmayt kɔlɔ dɛn |
| Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn | di strכkchכ dεm we fit dεn kin evaluate fכ standad, dip εn wayd blista kεviti dεm |
| PE Fכnshכnal Layεr | Sɔpɔt fleksibiliti, prɔsesabiliti ɛn prɔjek-spɛsifi k silin rikwaymɛnt |
| Barrier Pɔfɔmɛnshɔn | Ay mɔstɔ ɛn ɔksijɛn barɛri; spɛsifa target WVTR ɛn OTR wit tɛst kɔndishɔn dɛn |
| Optik Apɛndiks | Klia ɔ tint dipen pan di matirial fɔmyulashɔn |
| Aplikeshɔn dɛn | Tablɛt, kapsul, sɔft jel, nyutrasiutik ɛn sɔm sɛlɛkɛt famasitik blista aplikeshɔn dɛn |
| Kastamayzeshɔn | Layer ratio, totɛl tiknes, PVDC kɔtin wet, rol wit, kɔlɔ ɛn rol kɔnfigyushɔn |
PVC/PE/PVDC Mɛdisin Pakɛj
PVC/PE/PVDC Famasiutik Pakɛj
Di ki difrɛns bitwin PVC/PVDC ɛn PVC/PE/PVDC na di adishɔnal PE layt. Dis kin chenj aw di matirial de biev we dɛn de du thermoforming, impak ɛn siling ɔpreshɔn.
PE na mɔ fleksibul pas rigid PVC. If yu ad wan kɔntrol PE layt kin mek di mɔltilayer strɔkchɔ taf ɛn i kin yusful usay di blista we dɔn dɔn nid fɔ gɛt mɔ difɔmeshɔn pas wan kɔvɛnshɔnal rigid PVC/PVDC strɔkchɔ.
PVC/PE/PVDC dεn kin kכmכn fכ kכnsidrε fכ blista disayn wit dip כ wayda kεviti usay i fayn fכ impruv fכm bihayvya. Aktual kaviti kapabiliti dipen pan totכl tiknes, layt rεshכn, hεtin profayl εn tul.
Insay strɔkchɔ usay di PE sɔfa de tek pat pan silin, di ɛksaktɔ PE gred fɔ mach to di aluminiɔm fɔyl we dɛn want, polima lidding film ɔ ɔda mating layt. Sil pefɔmɛns fɔ validet as kɔmplit sistɛm.
Di adishɔnal fleksibul layt kin inflɔws impak bihayvya ɛn dimɛnshɔnal stebiliti. Packaging engineers fɔ evaluate di aktual laminate pas fɔ asum pefɔmans frɔm individyual polima prɔpati dɛn nɔmɔ.
PVDC kotin wet na wan pan di men vayriɔbul dɛn we dɛn kin yuz we dɛn de disayn wan PVC/PE/PVDC barɛri strɔkchɔ. Inkris PVDC kotin kin jεnarali ridyus wata-vapour εn כksijεn transmishכn, bכt di kכt wet nכmכ nכ fכ yuz as di fainal difinishכn fכ barεri gred.
Wan lɔwa kɔtin-weyt spɛsifikɛshɔn kin gi inɔf protɛkshɔn fɔ fɔmyulashɔn dɛn we nid fɔ mek dɛn impruv wan impɔtant barɛri pas standad PVC we dɛn de mentɛn wan ikɔnomik pakej strɔkchɔ.
Intamɛdiet kɔtin wet dɛn kin evalyu fɔ aplikeshɔn dɛn we nid strɔng mɔstɔ ɛn ɔksijɛn protɛkshɔn, we di kɔstɔma in stebiliti ɛn barɛri rikwaymɛnt dɛn.
di wet we di kכt we hכy kin gi wan strכng barεri insay di PVC/PE/PVDC famili. Bɔt, aplikeshɔn dɛn we nid ɛksɛpshɔn lɔw WVTR kin stil nid fɔ kɔmpia wit supa-hay-baria PVDC, PCTFE-bɛs ɔ kol-fɔm aluminiɔm strɔkchɔ dɛn.
Tu 90 g/m² ɔ 120 g/m² matirial kin prodyuz difrεn barεri rizulεt biכs fכ difrεns insay PVDC kεmεstri, kכt yunifכmiti, sabstεrayt, PE layεr εn tεmכfכm kכndishכn dεm. So di wan dɛn we de bay famasi fɔ aks fɔ di valyu dɛn we dɛn kin mɛzhɔ pas fɔ abop pan di wet we dɛn kɔt nɔmɔ.
WVTR de mɛzhɔ di amɔnt ɔf wata vapour we de transmit tru di pak matirial ɔnda difayn kɔndishɔn dɛn. Famasiutik fכmyuleshכn dεm we haygroskopik כ mכsichכ sεnsitiv jεnarali nid fכ lכw WVTR.
OTR de mכsu כksijεn transmishכn tru di mכltilayεr strכkchכ. Prodakt dεm we susεptibl fכ כksidεshכn kin nid lכw OTR valyu as pat pan dεn validet pak spεsifikεshכn.
WVTR ɛn OTR valyu dɛn fɔ kɔmpia ɔl we dɛn no tɛmpracha, rilitiv humiditi, sampul tik ɛn di we aw dɛn de du di tɛst. Barɛri valyu dɛn we dɛn mɛzhɔ ɔnda difrɛn kɔndishɔn dɛn nɔ kɔmparabl dairekt wan.
Tεmכfכm de strεch di mכltilayεr mεtirial, patikyular na di kכva kכna dεm εn sayd wכl dεm. fכ prodakt dεm we rili sεnsitiv, barεri tεst fכ tink bכt di finish blista kεviti biכs flat-film pεrformεns kin nכ riprizent di tכn fכm εria dεm.
Rilibul famasitik siling dipen pan di komplit bottom-wɛb ɛn lidding kɔmbaynshɔn. I nɔ fɔ tek am se wan PVC/PE/PVDC strɔkchɔ de sial ikwal fayn to ɛvri aluminiɔm fɔyl ɔ mɛdikal lid fim.
Aluminium liding foyl dɛn de yuz difrɛn ɔt-sil lak sistem dɛn. Di wan dɛn we de bay fɔ gi di ɛksaktɔl fɔyl spɛsifikɛshɔn so dat dɛn go ebul fɔ evalyu di kɔmpatibiliti wit di PE ɔ ɔda silin sɔfays.
Sil tempɔret dipen pan di matirial strɔkchɔ, lidding kɔtin, dwɛl tɛm, prɛshɔn ɛn layn spid. di objektif fכ bi fכ establish wan stebul prodakshכn winda pas wan singl labכtכri tεmprachכ.
Pil ɔ sil trɛnk fɔ evalyu akɔdin to di kɔstɔma in pak spɛsifikɛshɔn afta di matirial kɔmbayn dɔn fɔm ɛn sial ɔnda ripɔt prodakshɔn kɔndishɔn.
Finish blista kwalifayeshɔn fɔ evaluate chanɛl, lik, sil dɛfɛkt ɛn paket intɛgriti ɔnda ɛkspɛkt manufakchurin, transpɔt ɛn stɔrɔj kɔndishɔn.
Wan rizin we mek famasitik kɔnvɔta dɛn kin tink bɔt PVC/PE/PVDC instead ɔf wan simpul PVC/PVDC strɔkchɔ na di nid fɔ impɔtant fɔm bihayvya na big ɔ dip kaviti.
di dip we di kaviti de inkrεs de inkrεs di lokal strεch εn i de ridyus di tik we di mεtirial tik na di sayd wכl dεm εn di kכna dεm. Di wan dɛn we de bay fɔ gi di aktual kaviti dip ɛn jɔyometri we dɛn de pik di matirial.
Waid famasi prodakt kin nid difrɛn ɔt ɛn fɔm kɔndishɔn frɔm kɔvɛnshɔnal tablɛt kaviti. So, di dimɛnshɔn dɛn fɔ di prɔdak fɔ de wit di RFQ.
Di hitin winda fɔ alaw fɔ mek di PVC/PE difɔmeshɔn fayn fayn wan we nɔ go mek i shrinkage pasmak, delamination ɔ damej di barɛri kɔtin.
Fכ mכsichכ-sεnsitiv prodakt, dεn fכ evaluate di finish kaviti biכs di barεri pכrformεns dipכnt pan di PVDC layεr we de rεmain sufayf yunifכm afta i fכm.
Rotary sistem kin nid stebul wɛb fidin, kɔntrol rol tɛnsiɔn, yunifom ɔt ɛn kɔnsistɛns matirial tik. Di kɔstɔmayt rol wit dɛn fɔ mach to di aktual mashin kɔnfigyushɔn.
Flat-bed sistem dɛn de yuz difrɛn saykl dɛn fɔ ɔt ɛn fɔm. So, matirial kwalifayeshɔn fɔ riprodyuz di kɔstɔma in aktual opareshɔn kɔndishɔn dɛn.
Ay layn spid de inkrisayz di impɔtants fɔ kɔnsistɛns rol wayndin, flatnɛs, gej, ɔt rispɔns, fɔm winda ɛn sil winda. Suitability fɔ kɔnfyus pan di ɛksaktɔl mashin pas fɔ asum frɔm di wɔd 'high-speed compatible.'
| Strukchɔ | Praymari Advantej | Tipik Sɛlɛkshɔn Lɔjik |
|---|---|---|
| PVC we nɔ gɛt wan bɔt | Ikonomik tɛmɔfɔmin | Fɔ fɔmyulashɔn usay standad PVC barɛri na infεkt |
| PVC/PE we gɛt fɔ du wit am | Impruv fleksibiliti ɛn siling funkshɔnaliti | Fɔ fɔm ɛn sial prɔjek dɛn we nɔ gɛt strɔng PVDC barɛri rikwaymɛnt |
| PVC/PVDC we gɛt fɔ du wit am | Mɔstɔ ɛn ɔksijɛn barɛri | Fɔ kɔvɛnshɔnal ay-baria famasitik blista dɛn |
| PVC/PE/PVDC we gɛt fɔ du wit am | Barɛri plus ɛnhans multilayer fɔm fleksibiliti | Yuzful usay barɛri ɛn dip ɔ wayda tɛmfɔmin rikwaymɛnt dɛn fɔ balans |
| Supa-Hay-Bɛriɔ PVDC | Strɔng mɔstɔ ɛn gas protɛkshɔn insay transparent blista sistɛm dɛn | Tink bɔt we standad PVDC kɔtin nɔ mit di WVTR / OTR we dɛn nid |
| PCTFE-Based Film we dɛn dɔn mek | Rili ay mɔstɔ barɛri | Fɔ prɔdak dɛm we gɛt ay aygroskɔpik we nid fɔ gɛt strɔng wata-vaypa protɛkshɔn |
| Kol-Fɔm Aluminium | Rili ay layt, mɔstɔ ɛn gas protɛkshɔn | Evaluate usay transparency nɔ nid ɛn maksimam barɛri na di prayoritɛd |
Di bɛst matirial nɔto ɔtomɛtik wan we gɛt di ay barɛri. Famasitik pak injinia dɛn fɔ pik di strɔkchɔ we satisfay stebiliti rikwaymɛnt dɛn we dɛn de mentɛn fayn fɔm pefɔmɛns, mashin efyushɔn, pakej saiz ɛn totɛl pak kɔst.
PVDC de impruv mɔstɔ protɛkshɔn bɔku bɔku wan we yu kɔmpia am wit klin PVC, we de mek di multilayer film yusful fɔ famasi prodak usay humidity ɛksplɔshɔn na impɔtant stebiliti kɔnsyans.
PVDC de ridyus כksijεn εn gas transmishכn bak, we de alaw fכ evaluate di mεtirial fכ fכmulashכn dεm we susεptibl fכ כksidεshכn.
Di PVC/PE bays kin gi ɔda fleksibiliti kɔmpia wit wan kɔvɛnshɔnal rigid PVC strɔkchɔ, we kin ɛp we dɛn de prodyuz dip ɔ wayda kaviti.
Klia matirial de alaw tablɛt ɛn kapsul fɔ kɔntinyu fɔ si fɔ inspekshɔn we i de gi strɔng barɛri pas standad transparent PVC.
Tɔtɔl tik, PE layt, PVDC kɔtin wet, wit ɛn kɔlɔ kin tɔk bɔt akɔdin to di kɔstɔma in blista dizayn ɛn pak layn we de naw.
PVC/PE/PVDC kin evalyu fɔ tablɛt dɛn we nid fɔ gɛt mɔ mɔstɔ ɛn ɔksijɛn protɛkshɔn pas standad PVC we dɛn de kip transparent thermoformed blister pakej.
Kapsul ɛn sɔft jel kin nid big ɔ dip blista kaviti. Di PE layt we dɛn ad kin mek PVC/PE/PVDC bi opshɔn we fit fɔ evaluate usay ɔl tu di fɔmabiliti ɛn barɛri pefɔmɛns nid fɔ de.
Vitamin, probayotik ɛn ɔda mɔstɔ- ɔ ɔksijɛn-sɛnsitiv suplimɛnt dɛn kin evalyu wit PVC/PE/PVDC we di mɛzhɔd barɛri pefɔmɛns mit di finish prodak in stebiliti rikwaymɛnt.
PVDC-bεys blista strכkchכ dεm rilevεnt to fכmכlishכn fכ fכmulashכn dεm we dεn afekt bay humidity. Di wet ɛn strɔkchɔ we dɛn nid fɔ kɔt fɔ bi bays pan stebiliti tɛst pas wan jenɛrik 'high-barrier' designation.
Di matirial kin evaluet bak fɔ sɔm sɛlɛkɛt diagnostik ɛn wɛlbɔdi pak aplikeshɔn usay di fɔm, silin, prodak-kɔntakt ɛn barɛri rikwaymɛnt dɛn mach di kwalifay strɔkchɔ.
Famasiutik Blista Pak dɛn
Ɛlthkɛr Pakɛj Aplikeshɔn dɛn
PVC/PE/PVDC nɔ fɔ diskrayb as yunivasal kɔmpatibl wit ɛvri famasi fɔmyulashɔn. Di fayn we aw i fayn de dipen pan us layt de kɔntakt di prɔdak we dɛn pak ɛn pan di drɔg in kemikal kɔmpɔzishɔn, kɔtin, aditiv ɛn stɔrɔj kɔndishɔn.
Dɛn fɔ evaluate tablɛt ɛn kapsul dɛn akɔdin to di mɔstɔ sɛnsitiviti, ɔksijɛn sɛnsitiviti, layt sɛnsitiviti ɛn di kɔmplit stebiliti profayl.
We dɛn tink bɔt wan kɔnvɔyt PVC/PE/PVDC pakej fɔ pauda ɔ granul, dɛn fɔ rivyu di ɛksaktɔl filin ɛn silin fɔmat bikɔs kɔvɛnshɔnal blista rol spɛsifikɛshɔn dɛn nɔ kin kɔrɛkt dairekt to sachet ɔ fleksibul-pauch rikwaymɛnt dɛn.
Di pak we gɛt ay barɛri kin ridyus di envayrɔmɛnt we de ɛkspos, bɔt i nɔ de indipɛndɛnt garanti fɔ wan patikyula prɔdak shelf layf. Faynal expiry dating fɔ establish tru di famasitik manifakta in validet stebiliti program we de yuz di kɔmplit pak sistɛm.
Stebul multilayer tiknes de εp fכ mεnten prεdiktibכl hεt, kaviti fכmeshכn, rol hεndlin εn finish blista strכng.
di kכtכn kכnsistεns imכtant biכs lokaliz vεryushכn kin afekt di barεri pεrformεns fכ di fכs fכs fכm blista.
Di PVC/PE/PVDC laminate fɔ mentɛn adekwayt intalay adheshon di tɛm we dɛn de waynd, slit, ɔt ɛn thermoforming. Dip-kaviti trayal fɔ inklud inspekshɔn fɔ delamination.
Barɛri tɛst fɔ fala di tɛst we ɛn di envayrɔmɛnt kɔndishɔn we dɛn gri wit di famasi kɔstɔma.
Dɛn fɔ chɛk klia matirial fɔ si if i gɛt dɔti, skrach, blɔk, kɔtin nɔ fayn, jel ɔ ɔda tin dɛn we pɔsin kin si we kin afɛkt di we aw dɛn de prosɛs ɔ di we aw di pakej de luk.
Sil pefɔmans fɔ evalyu wit di aktual lidding matirial bikɔs di bɔt wɛb nɔmɔ nɔ kin ebul fɔ establish fayn paket sil trɛnk.
Famasiutik kwalifayeshɔn fɔ yuz dɔkyumentri we aplay to di ɛksaktɔ PVC/PE/PVDC gred we dɛn de bay. Jɛnɛrik wɔd dɛn lɛk 'pharma grade' nɔ fɔ tek ples fɔ rivyu di aktual tɛknikal spɛsifikɛshɔn, batch dɔkyumentri ɛn dɛstineshɔn-maket rikwaymɛnt dɛn.
Di TDS fɔ no di matirial strɔkchɔ, di tɔtal tiknɛs, rilevɛns layt spɛsifikɛshɔn dɛn, di wit, di rol kɔnfigyushɔn ɛn di fɛnshɔnal prɔpati dɛn we dɛn gri pan.
Di wan dɛn we de bay fɔ kɔmɛshɔn fɔ aks fɔ batch-spɛsifi k kwaliti dɔkyumentri we de kɔba di paramita dɛn we dɛn gri pan na di spɛsifikɛshɔn we dɛn dɔn gri fɔ bay.
Di pej we de naw gɛt sɛpret PVC ɛn PVDC rɛfrɛns dɔkyumɛnt dɛn. Bikɔs di prodak we dɔn dɔn na PVC/PE/PVDC kɔmpɔzit, di wan dɛn we de bay fɔ kɔnfɔm if dɛn dɔkyumɛnt ya de aplay to di ɛksaktɔl maltilayer gred ɛn dɛn fɔ aks fɔ di rayt fayn-prɔdakt dɔkyumentri we dɛn de kwalifay.
I fayn fɔ mek dɛn du trayal tɛst bifo dɛn chenj wan famasitik blista matirial we dɔn de, ajɔst di PVDC kɔtin wet ɔ transfa di matirial to difrɛn pak layn.
Evaluate cavity difinishɔn, matirial tinin, waytin, krak, delamination ɛn wɛb bihayvya yuz di aktual blista tul.
Kɔnfɛm if di strɔkchɔ we dɛn pik mit di barɛri target we dɛn nid ɔnda di tɛst kɔndishɔn dɛn we di famasitik kɔstɔma dɔn spɛsifa.
Sial di film yuz di aktual prodakshɔn lid fɔyl ɛn establish wan akseptabl tɛmpracha, prɛshɔn ɛn dwɛl-taym winda.
Chek wɛb trakin, rol unwinding, fɔm kɔnsistɛns, silin, kɔt ɛn ɔvalayn mashin efyushɔn pan ripɔt kɔmɛshɔnal spid.
Di pak strɔkchɔ we dɛn dɔn pik fɔ de insay di drɔg manifakta in stebiliti ɛn pak-kwalifayshɔn program bifo dɛn mek kɔmɛshɔnal shelf-layf klem.
Total laminate tiknes kin bi selekt akɔdin to di kaviti dimɛnshɔn, stiffnɛs, fɔm rikwaymɛnt ɛn egzistin pak spɛsifikɛshɔn.
Usay PE layt tik ɔ silin pefɔmɛns impɔtant, gi di strɔkchɔ we de naw ɔ di target pefɔmɛns fɔ tɛknikal ɛvalueshɔn.
Wallis naw de list lɛk 60–120 g/m² PVDC kotin opshɔn dɛn. Selekshɔn fɔ link to di WVTR, OTR ɛn finish blista pefɔmɛns we dɛn nid.
Rol width kin kɔstɔmayz fɔ mach di kɔstɔma in thermoforming mashin ɛn blista layout insay di manufakchurin kapabiliti dɛn we de.
Di wan dɛn we de bay fɔ gi kɔr dayamita, maksimam rol dayamita, rol wet, wayndin dairekshɔn, splais limiteshɔn ɛn lɛbl rikwaymɛnt.
Dɛn kin tɔk bɔt transparent ɛn tint kɔlɔ dɛn akɔdin to di brand, prodak-identifikeshɔn ɛn layt-mɛnejmɛnt rikwaymɛnt dɛn. Usay di famasitik fotostabiliti impɔtant, dɛn fɔ spɛsifa di layt-transmishɔn rikwaymɛnt dɛn we dɛn kin mɛzhɔ sɛpret wan.
Fɔ no if di prɔdak na tablɛt, kapsul, sɔft jel, nyutrasiutik ɔ ɔda doz fɔm ɛn sho in men sɛnsitiviti to mɔstɔ, ɔksijɛn ɔ layt.
If yu de riples ɔda spɔlayt, gi di PVC/PE/PVDC tɛknikal spɛsifikɛshɔn we de naw ɔ wan rɛfrɛns rol.
Spɛsifi k tot ɔl tiknɛs ɛn PVC / PE / PVDC layt rikwaymɛnt usay dɛn dɔn ɔlrɛdi establish.
Gi di kɔtin wet we de naw ɔ di barɛri target we yu nid if yu nid Wallis fɔ evalyu wan aprɔpriet PVDC spɛsifikɛshɔn.
Inklud di target barɛri valyu dɛn togɛda wit di tɛst tɛmpracha we dɛn nid, rilitiv humiditi ɛn tɛst we dɛn de du ɛnisay we i pɔsibul.
Gi rol wit, wit tolɛreshɔn, kɔr dayamita, maksimal ɔdasay dayamita, wayndin dairekshɔn ɛn maksimal rol wet.
Gi di mashin manifakta, mɔdel, rotary ɔ flat-bed fɔm sistɛm ɛn nɔmal ɔpreshɔn spid.
Inklud di kaviti lɔng, di wit, dip ɛn kɔna jɔyometri, mɔ fɔ dip ɔ wayd kaviti.
Identify di aluminium foyl ɔ polima lidding strɔkchɔ ɛn gi di sil tɛmpracha, prɛshɔn, di tɛm we dɛn de de ɛn di layn spid we de naw.
Gi di kɔntri we yu de go ɛn di tin dɛn we dɛn nid fɔ du fɔ mek yu gɛt famasi, famakopi, maykreshɔn ɔ di kɔstɔma-spɛsifi k dɔkyumentri.
Di Wallis infɔmeshɔn we de naw de sho se wan tipik MOQ we de arawnd 500 kg, we di trayal-ɔda we de de dipen pan strɔkchɔ, di wet we dɛn de kɔt, di wit, di kɔlɔ ɛn di scheduling fɔ di prodakshɔn. Konfam di fainal MOQ di tɛm we dɛn de kot.
Famasitik Pak Matirial Faktɔri
Famasitik Pakɛj Inspekshɔn Rum
Famasiutik Matirial Paket Prodakshɔn Layn
PVC Famasiutik Matirial Prodakshɔn Layn
Wallis de saplae plastic sheet, film ɛn spɛshal famasitik pak matirial fɔ intanashɔnal B2B projɛkt dɛn. Fɔ PVC/PE/PVDC prɔjek, dɛn kin tɔk bɔt spɛsifikɛshɔn dɛn akɔdin to di kɔstɔma in barɛri target, kɔnvɔtin prɔses, pak ikwipmɛnt ɛn di saplay-kwalifayeshɔn rikwaymɛnt dɛn.
Kastomiz PVC / PE / PVDC multilayer strɔkchɔ dɛn
Kastom PVDC kotin wet
Kastom rol wit ɛn rol kɔnfigyushɔn
Transparent ɛn tinted matirial opshɔn dɛn
Sampul sɔpɔt fɔ fɔm ɛn sial trayal dɛn
Teknik-dokumɛnt diskishɔn fɔ famasi kwalifayeshɔn
Ekspɔt pak fɔ intanashɔnal B2B ɔda dɛn
PVC/PE/PVDC na wan multilayer famasitik pakej film we kɔba PVC thermoforming sɔpɔt, PE fleksibiliti ɛn funkshɔnal silin kwaliti, ɛn PVDC mɔstɔ ɛn ɔksijɛn barɛri pefɔmɛns.
PVC/PVDC de kam togɛda wan rigid PVC sabstret wit wan PVDC barɛri kɔtin. PVC/PE/PVDC inklud wan adishכnal PE layt we kin impruv fleksibiliti, prכsesabiliti εn siling fכnshכnaliti, we de mek i yusful fכ evaluate fכ dip כ wayda blista kεviti.
di kכrant Wallis prodakt rεnj de list di tכtal tiknes dεm we de arawnd 50–400 μm. Faynal layt rεshכn εn tiknes tכlerεns dεm fכ kכnfכm akɔdin to di fכm εn barεri pεrformεns we dεn nid.
Wallis naw de list PVDC kכt wet dεm we de arawnd 60–120 g/m². di bεst kכtin wet fכ sεlekt akɔdin to di WVTR, OTR εn famasitik stεbiliti tכgεt we dεn nid.
di wet we di kɔtin we ay pasmak kin jɔs mek di barɛri wok fayn, bɔt i kin ad kɔst ɛn nɔto in wan de disayd di las barɛri. PVDC kemistri, kotin yunifom, fɔm dip ɛn pakej dizayn impɔtant bak.
PVC/PE/PVDC kin gi ay mɔstɔ ɛn ɔksijɛn barɛri, bɔt 'ɔltra-ay barɛri' fɔ difayn bay di WVTR ɛn OTR rikwaymɛnt dɛn we dɛn kin mɛzhɔ. Prodakt we rili sɛnsitiv kin nid supa-hay-baria PVDC, PCTFE-based film ɔ kol-fɔm aluminiɔm.
Di PE layt de ad fleksibiliti to di multilayer strɔkchɔ ɛn i kin sɔpɔt di prɔsesin ɛn silin rikwaymɛnt dɛn. I ekzak wok dipen pan usay di PE layt de ɛn aw dɛn disayn di pakej we dɔn dɔn.
di strכkchכ dεm we fit dεn kin evaluate fכ dip εn wayd kεviti dεm. Aktual kapabiliti dipen pan totכl tiknes, PE layεr, kaviti jכmetri, hεtin profayl εn blista mashin. Dɛn kin advays fɔ mek dɛn tray fɔ mek prodakshɔn.
Yes, dεn kin evaluate am fכ tablεt blista pak usay di strכkchכ we dεn sεlekt satisfay di dכg in mכsichכ, כksijεn, fכm εn stεbiliti rikwaymεnt dεm.
i kin evaluate fכ kapsul εn sכft jel dεm, patikyular we big blista kεviti dεm nid כl tu impruv fכm bihayv εn inkrεs barεri pכrfomans.
Kɔmpatibiliti dipen pan di ɛksaktɔ PE sɔfays ɛn di ɔt-sil kɔtin we dɛn yuz pan di aluminiɔm fɔyl. Di aktual bottom web ɛn lidding foil fɔ tɛst togɛda bifo dɛn prodyuz bɔku bɔku wan.
Dɛn kin ebul fɔ evaluate di rayt gred dɛn pan ay-spid famasitik layn dɛn, bɔt di kɔmpitibliti fɔ mashin dipen pan di ɛksaktɔl mɔdel, rol kɔnfigyushɔn, ɔt kɔndishɔn, kaviti jɔyometri, silin winda ɛn layn spid.
Dɛn kin ebul fɔ evaluate ɔl tu di prɔses dɛm, bɔt dɛn kin yuz difrɛn ɔt ɛn fɔm kɔndishɔn dɛm. Di spesifik blista-mashin mɔdel fɔ de di tɛm we dɛn de kwalifay di matirial.
WVTR we dɛn nid de dipen pan di prɔdak in mɔstɔ sɛnsitiviti, blista jɔyometri, stɔrɔj klaymat ɛn target shelf layf. Gi di target valyu togɛda wit tɛmpracha, rilitiv humiditi ɛn tɛst we.
di OTR we nid de dipכnt pan aw sεnsitiv di fכmulashכn fכ כksidεshכn. Di valyu fɔ kɔmɔt frɔm stebiliti ɛn pak-divɛlɔpmɛnt rikwaymɛnt.
No pak matirial indipɛndɛnt wan de garanti wan patikyula shelf layf. PVC/PE/PVDC kin ridyus di mɔstɔ ɛn ɔksijɛn transmishɔn, bɔt di las tɛm we dɛn fɔ dɔn fɔ dɔn, dɛn fɔ mek am tru di famasitik manifakta in validet stebiliti program.
Stɛrilayz mɛdikal-divays pak nid sɛpret kwalifayeshɔn fɔ matirial kɔmpatibiliti, sterilayz mɛtɔd, sil intɛgriti ɛn aplikebul mɛdikal-divays pak standad. I nɔ fɔ tek am frɔm di PVC/PE/PVDC matirial nem nɔmɔ.
Yu kin tɔk bɔt transparent, tinted ɛn kɔstɔmayz kɔlɔ dɛn. If di famasitik prodak nid layt protɛkshɔn, di wan dɛn we de bay fɔ sho bak di wevlɛnj we dɛn nid ɛn di layt-transmishɔn pefɔmɛns.
Yɛs. Sampul ɛn trayal matirial fɔ evalyu fɔ thermoforming, baria pefɔmɛns, PE/lidding kɔmpatibiliti, wɛb rɔn ɛn finish-pakɛj intɛgriti bifo kɔmɛshɔnal aprɔval.
di infכmeshכn fכ di Wallis prodakt we de naw de sho se wan tipik MOQ de arawnd 500 kg. Trayal-ɔda avaylabl ɛn fayn MOQ dipen pan strɔkchɔ, PVDC kɔtin wet, wit, kɔlɔ ɛn kɔrɛnt prodakshɔn scheduling.
Duya gi di drɔg ɔ di doz fɔm, di matirial strɔkchɔ we de naw, di tɔtal tiknes, di PE layt we dɛn nid, di PVDC kɔtin wet ɔ di target WVTR/OTR, di rol wit, di kɔr dayamita, di blista-mashin mɔdel, di kaviti dimɛnshɔn, di lidding fɔyl, di siling kɔndishɔn, di rigyuletɔri rikwaymɛnt ɛn di ɛstimat ɔda kwantiti.
Send Wallis yu kɔrɛnt PVC/PE/PVDC strɔkchɔ, totɛl tiknɛs, PVDC kɔtin wet ɔ barɛri target, rol wit, blista-mashin mɔdel, kaviti dimɛnshɔn ɛn liding matirial. Wi kin tɔk bɔt kɔstɔmayz ay-baria famasitik blista film fɔ OEM ɛn B2B prɔjɛkt dɛn.
If yu de riples wan blista-film saplay we dɔn de, gi di TDS, COA ɔ rɛfrɛns rol we de naw so dat dɛn go ebul fɔ evalyu di barɛri, fɔm, silin ɛn mashin-rɔn we dɛn nid bifo dɛn prodyuz am fɔ kɔmɛshɔn.
