|
PVC we dɛn kin yuz
WALLIS
| advantej: | |
|---|---|
| Kwantiti: | |
Wallis de saplae famasi rigid PVC blista film ɛn had shit fɔ tablɛt, kapsul, vaytamɛn, nyutrasiutik, vetɛriana ɛn sɛlɛkɛt wɛlbɔdi pak. Di rigid PVC fɔm wɛb de gi optik klia, dimɛnshɔnal stebiliti ɛn kɔntrol thermoforming pefɔmɛns fɔ kɔvɛnshɔnal famasitik blista prodakshɔn.
Wallis famasitik PVC de insay lɛk 0.15–0.80 mm tik ɛn waid te to lɛk 680 mm , wit transparent, tint, kɔlɔ, opaque, glossy ɛn mat opshɔn dɛn we de akɔdin to wetin di prɔjek nid.
Plɛn rigid PVC na di fɔs wan we dɛn kin pik usay dɛn nid gud tɛmfɔmabiliti, klia, mɛkanikal protɛkshɔn ɛn kɔst efyushɔn ɛn di famasitik fɔmyulashɔn nɔ nid advans mɔstɔ ɔ ɔksijɛn barɛri. Mɔ sɛnsitiv prodak dɛn fɔ evalyu wit PVC/PVDC, PVC/PE/PVDC, PCTFE-based ɔ ɔda ay-baria strɔkchɔ dɛn akɔdin to stebiliti data.
Di valyu dɛn we de dɔŋ ya de sho di kɔrɛnt tipik Wallis prodak rɛnj. Faynal spɛsifikɛshɔn, tolɛreshɔn ɛn tɛst mɛtɔd fɔ kɔnfyus akɔdin to di aprɔv famasitik pak gred ɛn bay spɛsifikɛshɔn.
| Paramita | Tipik Spɛsifikeshɔn / Notis dɛn |
|---|---|
| Sɔntin | Farmasi Rigid PVC Blister Film / PVC Had Shit |
| Tin dɛn | Rigid PVC we dɛn fɔmulayt fɔ famasitik blista pak aplikeshɔn dɛn |
| Tik we i tik | Na lɛk 0.15–0.80 mm |
| Wayd | I kin rich lɛk 680 mm; customized slitting de fɔ yu |
| Kɔlɔ | Transparent, tinted, kala ɔ opaque |
| Surface Finish na di wɔl | Glossy, mat ɔ kɔstɔmayz finish |
| Mɔstɔ Absɔpshɔn | Kɔrɛnt Wallis spɛsifikɛshɔn list dɛn ≤0.1%; kɔnfɔm tɛst we fɔ ɔda gred |
| Tensile Strɔng we pɔsin kin gɛt | Kɔrɛnt Wallis spɛsifikɛshɔn list ≥48 MPa; kɔnfɔm dairekshɔn ɛn tɛst we fɔ ɔda gred |
| Tɛmofɔmin we dɛn kin yuz fɔ mek tin dɛn | Disain fɔ kɔmpitabl famasitik blista tɛmfɔmin prɔses |
| Lidding Kɔmpatibiliti fɔ di wok | Kompatibl sistem kin yuz aluminiɔm liding fɔyl wit ɔt-sil lak we dɛn fɔmulayt fɔ PVC |
| Fɔmat fɔ di Sapɔt | Rol dɛn we dɛn kɔl; kɔnvɔyt shit fɔmat dɛn we de ɔnda di prɔjek kɔnfɔmeshɔn |
| Aplikeshɔn dɛn | Tablɛt, kapsul, nyutrasiutik, vetɛriana ɛn sɛlɛkɛt wɛlbɔdi blista pak |
| Kastamayzeshɔn | Tik, wit, kɔlɔ, finish, rol dimɛnshɔn, kɔr saiz ɛn ɛkspɔt pak |
Farmasi Rigid PVC Blister Film
PVC Farmasitik Paket Film
Famasiutik rigid PVC film na thermoformable plastic fכm wεb we dεn kin yuz fכ mek cavities insay kכvεshכnal blista pakej dεm. di mεtirial de hεt, fכm rawnd di rikwayd kaviti jכmetri, fulכp wit di famasitik prodakt εn afta dat dεn sial am wit wan kompitibl lid strכkchכ.
PVC de gi di strכkchכral bays fכ di blista kεviti. I rigiditi de ɛp di pɔkit we dɛn dɔn fɔm fɔ kip in shep we i de ful-ɔp, lid, kɔt, katɔn, transpɔt ɛn kɔshɔma handel.
Klia PVC de alaw di tablɛt ɔ kapsul fɔ kɔntinyu fɔ si tru di blista, we de sɔpɔt fɔ no di prɔdak ɛn fɔ si am. Dɛn kin tɔk bak bɔt PVC we gɛt kɔlɔ ɔ we nɔ de shayn usay dɛn nid fɔ si difrɛns ɔ layt mɛnejim.
Plɛn rigid PVC na tin we dɛn kin tink bɔt bɔku say usay famasitik fɔmyulashɔn dɛn gɛt rili mɔdaret barɛri rikwaymɛnt ɛn pak injinia dɛn kin prɔyoritɛt thermoformability, klia, mashin prodaktiviti ɛn kɔst efyushɔn.
Dis difrɛns impɔtant we yu de pik di tin dɛn we yu fɔ pak fɔ mek mɛrɛsin. Wan lɔw matirial mɔstɔ-absɔpshɔn valyu nɔ min ɔtomɛtik wan se di fim de gi ay barɛri agens wata vapour we de pas tru di paket.
di mכsichכ absכpshכn de mכsu aw bכku wata di polimכr insεf de abzכp כnda wan difayn tεst kכndishכn. Di kɔrɛnt Wallis spɛsifikɛshɔn de list wan valyu we na ≤0.1% fɔ dis prɔdak.
WVTR de diskraib aw bɔku wata vapour de pas tru wan pak matirial ɔnda difayn tɛmpracha ɛn humiditi kɔndishɔn. Dis na mכr rilevεnt mεtrik we yu de disayd if fכm blista de gi inof protεkshכn fכ wan mכsichכ-sεnsitiv drog.
Plɛn PVC kin bi aprɔpriet fɔ rili stebul fɔmyulashɔn usay di rikwayd mɔstɔ barɛri kin ajɔst bay di kɔmplit pak dizayn ɛn validet stebiliti program.
Hygroscopic, highly moisture-sensitive ɔ oxygen-sensitive formulations kin nid PVC/PVDC, PVC/PE/PVDC, PCTFE-based film, kol-fɔm aluminiɔm ɔ ɔda strɔkchɔ we gɛt ay barɛri.
Thermoforming pefomans na wan pan di impɔtant rizin dɛn we mek rigid PVC de kɔntinyu fɔ yuz bɔku bɔku wan fɔ kɔvɛnshɔnal famasitik blista. Matirial tik, fɔmyulashɔn, ɔt bihayvya, mold dizayn ɛn mashin sɛtin de wok togɛda fɔ no di finish kaviti kwaliti.
di tik we di film tik we kכnsistεnt de εp di wεb fכ hεt mכr yunifכm wan akɔdin to in wit, we de ridyus di vεryushכn bitwin di blista kεviti dεm εn sכpכt stebul kכmεshכnal prodakshכn.
di aprכpriet fכm kכndishכn dεm de εp fכ prodyuz kεviti dεm we dεn dεfεn fayn fayn wan we nכ de tכn pasmak, distorshכn כ strεs mak dεm we dεn nכ want.
dip kaviti dεm de put big dimand pan di PVC film biכs di mεtirial de strεch mכr na di sayd wכl εn kכna dεm. Di wan dɛn we de bay fɔ gi di tablɛt ɔ kapsul dimɛnshɔn ɛn di kaviti dip we dɛn de evalyu nyu PVC spɛsifikɛshɔn.
Dɛn kin ebul fɔ evaluate fayn fayn famasitik PVC film dɛn pan rotary ɛn flat-bed blister ikwipmɛnt. Bikɔs di ɔt profayl, fɔm saykl ɛn wɛb hanlin difrɛn bitwin mashin dɛn, di fayn gred fɔ kwalifay pan di aktual prodakshɔn layn.
Kɔnvɛnshɔnal Alu-PVC blista pak nɔmal wan de yuz aluminiɔm liding fɔyl we de kɛr wan ɔt-sil lak we dɛn fɔmulayt fɔ bon to di PVC fɔm wɛb. So dɛn fɔ evalyu di kɔmplit PVC-ɛn-lid kɔmbayn as wan pak sistɛm.
Nɔto ɔl aluminiɔm fɔyl de yuz di sem ɔt-sil kɔtin. Di wan dɛn we de bay fɔ gi di aktual lidding-foil spɛsifikɛshɔn we dɛn de kwalifay fɔ mek nyu PVC blista film.
Sil tempɔret fɔ optimiz togɛda wit prɛshɔn, dwɛl tɛm ɛn prodakshɔn spid. Wan prɛktikal ɔpreshɔn winda yusful pas fɔ tek am se wan silin tɛmpracha de wok pan ɛvri layn.
Sil trɛnk, chanɛl, lik ɛn ɔvala blista intɛgriti fɔ chɛk yuz di kɔstɔma in aktual fɔm wɛb, lidding matirial ɛn kɔmɛshɔnal pak kɔndishɔn.
Rigid PVC kin gi kɔntrol thermoforming bihayvya fɔ kɔvɛnshɔnal tablɛt ɛn kapsul blista kaviti we tik, matirial gred ɛn prɔsesin kɔndishɔn dɛn kɔrɛkt wan mach.
Transparent PVC de alaw fɔ mek yu si di prɔdak klia wan ɛn i kin ɛp fɔ sɔpɔt manual ɔ ɔtomatik vijual inspekshɔn fɔ tablɛt ɛn kapsul.
Di rigid strɔkchɔ de sɔpɔt stebul kaviti dimɛnshɔn dɛn di tɛm we dɛn de ful-ɔp, sial, kɔt ɛn katɔn ɔpreshɔn dɛn we de dɔŋstrim.
PVC de gi yusful resistans to bɔku kɔmɔn kemikal dɛn we dɛn kin mit we dɛn de handle di pak we nɔmal. Kɔmpatibiliti wit di spɛshal famasitik fɔmyulashɔn, klin kemistri ɔ ɔda kɔntakt matirial fɔ stil ɛvaluet usay i rili impɔtant.
Fɔ fɔmyulashɔn dɛn we nɔ nid advans barɛri strɔkchɔ, plein rigid PVC de gi prɛktikal balans fɔ fɔmabiliti, visibiliti, mɛkanikal protɛkshɔn ɛn matirial kɔst.
Tik, rol wit, kɔlɔ, sɔfays finish, kɔr saiz ɛn rol kɔnfigyushɔn kin tɔk bɔt akɔdin to di blista mashin ɛn finish pak.
Plɛn rigid PVC na tin we dɛn kin tink bɔt fɔ stebul ɔral sɔlid doz prodak usay wan kɔvɛnshɔnal transparent thermoformed blister de gi inof protɛkshɔn.
PVC kin fכm bak insay kapsul kεviti dεm. big kapsul dεm kin nid fכ tek tεm sεlekt di film tik εn fכm kכndishכn biכs di kaviti dip de inkrεs di mεtirial strεch.
Vitamin ɛn suplimɛnt dɛn we gɛt fayn stebiliti profayl kin yuz transparent ɔ kɔlɔ PVC blista usay di mɔstɔ ɛn ɔksijɛn protɛkshɔn we dɛn nid de apin bay di kɔmplit pak sistɛm.
Sεlekt veterinari tablεt, kapsul εn כda sכlid doz prodak dεm kin yuz rigid PVC blista pak bak afta prodak-spεsifi k kwalifayshכn.
Rigid PVC kin evalyu bak fɔ sɔm sɛlɛkɛt nɔ-stɛriyl wɛlbɔdi biznɛs ɛn kɔshɔma pak aplikeshɔn dɛn. Stɛriyl mɛdikal-divays pak nid fɔ gɛt sɛpret validɛshɔn fɔ di matirial, lid, sil intɛgriti ɛn sterilayz kɔmpatibiliti.
Tablɛt Blister Pakɛj
Kapsul Blister Pak we dɛn kin yuz
Di aprɔpriet PVC tiknɛs dipen pan di kaviti jɔyometri, di prodakt dimɛnshɔn, di poket rigiditi we dɛn nid ɛn di blista-mashin kɔndishɔn. Wallis de gi wan brayt 0.15–0.80 mm rεnj, bכt fכmasiutik blista aplikεshכn dεm nכmal fכ yuz כnli di pat we aprכpriet to di spεsifi k pakej.
Big tablεt εn kapsul dεm jεnarali nid big kכva εn i kin nid difrεn PVC gej frכm sכm sכm tablεt dεm.
big fכm dip de mek mכr tin na di kaviti wכl. fכ dat, dεn fכ evaluate di finish kaviti strכng pas fכ sεlekt film nכmכ frכm nominal flat-film tiknes.
Difrɛn blista mashin dɛn kin yuz difrɛn saykl dɛn fɔ ɔt ɛn fɔm. Gi yu kɔrɛnt matirial tik ɛn mashin mɔdel we yu de riples ɔda spɔlayt.
Di fainal kaviti fɔ gi inof strɔkchɔral protɛkshɔn we dɛn de ful-ɔp, sial, sɛkɔndari pak ɛn transpɔt we yu nɔ yuz matirial we nɔ nid.
| Material | Praymari Advantej | Tipik Selekshɔn Lɔjik |
|---|---|---|
| PVC we gɛt rigid | Klari, thermoformabiliti ɛn kɔst efyushɔn | Stebul fכmyuleshכn wit rili lכw barεri rikwaymεnt |
| PVC/PVDC we gɛt fɔ du wit am | Impɔtant mɔstɔ ɛn ɔksijɛn barɛri | di prɔdak dɛm we gɛt mɔstɔ ɔ ɔksijɛn we nid fɔ gɛt transparent blista |
| PVC/PE/PVDC we gɛt fɔ du wit am | Barɛri kɔmbayn wit ɔda multilayer fɔm ɔ silin funkshɔnaliti | Mɔ dimand fɔm ɛn barɛri rikwaymɛnt dɛn |
| PCTFE-Based Film we dɛn yuz fɔ mek di fim | Rili ay mɔstɔ barɛri we yu de mentɛn transparency | Fɔmulashɔn dɛn we rili sɛnsitiv to mɔstɔ |
| Kol-Fɔm Aluminium | Rili ay mɔstɔ, gas ɛn layt protɛkshɔn | Fɔmyulashɔn dɛn we rili sɛnsitiv usay transparency nɔ nid |
Di strɔkchɔ we gɛt di ays-baria nɔto ɔtomɛtik wan di bɛst pak we dɛn kin pik. Di kɔrɛkt strɔkchɔ fɔ satisfay di prɔdak in stebiliti rikwaymɛnt we i de balans fɔm efyushɔn, blista saiz, layn prodaktiviti ɛn totɛl pak kɔst.
Transparent PVC de gi maksimal prodak visibiliti ɛn i fayn usay tablɛt ɔ kapsul nid fɔ kɔntinyu fɔ si tru di blista we dɔn dɔn.
amber, blu, grεn כ כda tinted fכmulashכn dεm kin dכn tכk bכt fכ vishכnal difrεns. Usay di prɔdak gɛt layt sɛnsitiv, dɛn fɔ validet di aktual wevlɛnj-spɛsifi k layt transmishɔn instead fɔ abop pan di kɔlɔ apinɛns nɔmɔ.
Dɛn kin mek opaque kɔlɔ usay i nɔ nid fɔ si di prɔdak ɔ usay di we aw dɛn mek di pak nid fɔ ayd di tin dɛn we pɔsin kin si strɔng.
Kɔnsistɛns gej de sɔpɔt prɛdiktibɛl ɔt, fɔm ɛn kaviti rigiditi akɔs di prodakshɔn wɛb.
Stebul rol wayndin ɛn wɛb flatnɛs sɔpɔt rili fidin, tɛnsiɔn kɔntrol ɛn kɔntinyu blista-mashin ɔpreshɔn.
Dɛn fɔ chɛk klia famasitik PVC fɔ si if i gɛt kɔntaminɛshɔn, haz, blak spat, jel, skrat ɛn ɔda tin dɛn we nɔ fayn we go afɛkt di we aw dɛn de si am ɔ di we aw dɛn dɔn pak di tin dɛn we dɛn dɔn pak.
Tensile, impak ɛn ɔda mɛkanikal rikwaymɛnt dɛn fɔ spɛsifa wit di aplikebul tɛst we dɛn rili impɔtant to di kɔstɔma in blista kɔnvɔshɔn prɔses.
Di wan dɛn we de bay famasi fɔ no di famakopial, rɛsɛdyual mɔnoma, maykreshɔn ɛn dɛstineshɔn-maket rikwaymɛnt dɛn we dɛn kin yuz fɔ di ɛksaktɔl PVC gred pas fɔ abop pan wan jenɛrik 'famasiutik gred' diskrɔpshɔn nɔmɔ.
Di kwalifayeshɔn fɔ di saplay fɔ bi bay di dɔkyumɛnt dɛn we de aplay to di ɛksaktɔl prodak gred ɛn di prodakshɔn batch. Di wan dɛn we de bay fɔ difayn di tɛknikal ɛn rigyuletɔri dɔkyumɛnt dɛn we dɛn nid bifo dɛn gri fɔ kɔmɛshɔnal saplai.
Di Wallis pej we de naw de gi di PVC rɛfrɛns dɔkyumɛnt we de dɔŋ ya. Di wan dɛn we de bay fɔ kɔnfɔm se di sɛtifiket de aplay to di rayt PVC gred ɛn batch we dɛn de bay.
Di pej we de naw gɛt bak wan PVDC rɛfrɛns sɛtifiket. Bikɔs di prɔdak we de na dis pej na klin rigid PVC, dɛn fɔ trit dis PVDC dɔkyumɛnt as rilayt rɛfrɛns nɔmɔ ɛn nɔto as di COA fɔ di klin PVC prodak.
Rɔn di matirial yuz di aktual fɔm mold ɛn pak mashin fɔ evaluate cavity shep, wall thinning, wɛb bihayvya ɛn visual defects.
Yuz di prodakshɔn lid fɔyl fɔ no di prɛktikal silin-tɛmpracha, prɛshɔn ɛn dwɛl-taym winda.
Chek unwinding, wɛb trakin, fidin, fɔm, sial ɛn kɔt pan ripɔt kɔmɛshɔnal prodakshɔn spid.
Plɛn PVC fɔ jɔs apruv usay di pakej we dɔn dɔn satisfay di famasitik prodak in validet stebiliti rikwaymɛnt dɛn ɔnda di stɔrɔj kɔndishɔn dɛn we dɛn nid.
Tiknes kin diskכs insay di mεnεjmεnt rεnj we de akɔdin to di kaviti jכmetri, rigiditi εn blista-mashin rikwaymεnt dεm.
Rol width kin slit akɔdin to di blista layout ɛn ikwipmɛnt kɔnfigyushɔn insay di prodakshɔn width we de.
Transparent, tinted, kala ɛn opaque PVC kin tɔk bɔt akɔdin to di prodak visibiliti ɛn branding rikwaymɛnt.
Glossy, mat ɛn projɛkt-spɛsifi k sɔfays rikwaymɛnt dɛn kin evalyu akɔdin to optik apinans ɛn daunstrim prɔsesin.
Kor dayamita, rol lɔng, maksimal rol dayamita, rol wet, wayndin dairekshɔn ɛn pak kin spɛsifa akɔdin to di kɔstɔma in layn.
Fɔ no if di blista gɛt tablɛt, kapsul, nyutrasiutik, vetɛriana prodak ɔ ɔda doz fɔm ɛn sho ɛni mɔstɔ, ɔksijɛn ɔ layt sɛnsitiviti we dɛn no.
Gi di film tik we yu nid ɔ di spɛsifikɛshɔn we dɛn de yuz naw na yu blista layn.
Spɛsifik rol wit, wit tolɛreshɔn, kɔr dayamita, maksimal rol dayamita ɛn wayndin dairekshɔn.
Gi di manifakta, mɔdel, fɔm tayp ɛn nɔmal prodakshɔn spid fɔ sɔpɔt matirial ɛvalueshɔn.
Inklud tablɛt ɔ kapsul saiz ɛn di finish kaviti lɔng, wit ɛn dip usay i de.
Identify di lidding foil ɛn heat-seal lak we dɛn de yuz naw so dat dɛn go ebul fɔ evaluate di siling kompitibiliti.
Spɛsifik transparent, tint ɔ opaque kɔlɔ togɛda wit glos, mat ɔ ɔda sɔfays rikwaymɛnt dɛn.
Gi di dɛstineshɔn makɛt ɛn di rikwayd famakopi, maykreshɔn, rɛsɛdyual mɔnoma, DMF ɔ di kɔstɔma-spɛsifi k dɔkyumentri rikwaymɛnt dɛn.
di infכmeshכn fכ di Wallis prodakt we de naw de list wan tipik MOQ we na lεk 500 kg. Trial-ɔda avaylabl, fri-sampul polisi ɛn fayn MOQ fɔ kɔnfɔm akɔdin to tik, wit, kɔlɔ ɛn prodakshɔn scheduling.
Kɔnsistɛns famasitik blista prodakshɔn nid fɔ kɔntrol matirial tik, sɔfayz kwaliti, rol wayndin ɛn fɔm bihayvya. Di wan dɛn we de bay we de riples wan spɔlayt we dɔn de fɔ kɔmpia di nyu PVC fim we de yuz di sem kaviti dizayn, liding fɔyl ɛn prodakshɔn kɔndishɔn bifo dɛn gri fɔ am.
Famasiutik PVC Prodakshɔn Layn
Famasiutik Pakɛj Tɛst Labɔrɔtɔri
Wallis de sɔpɔt famasitik pak kɔnvɔta ɛn industrial bayer dɛn wit kɔstɔmayz PVC dimɛnshɔn, rol spɛsifikɛshɔn, kala divɛlɔpmɛnt, sɛmpul ɛn ɛkspɔt pak akɔdin to di prɔjek rikwaymɛnt dɛn.
Famasiutik rigid PVC na tεmכfכmabl fכm wεb we dεn kin yuz fכ mek kכvεt fכ tablεt, kapsul εn כda fayn prכdak dεm insay kכvεshכnal blista pak.
di korekt tiknes dipכnt pan di prodakt saiz, di kaviti dip, mashin εn di blista rigiditi we dεn nid. Wallis naw de gi lεk 0.15–0.80 mm, we di εksakεt pak gεj fכ sεlekt bay prodakshכn tεst.
Di Wallis spɛsifikɛshɔn we de naw de list di wit dɛn we go rich lɛk 680 mm. Dɛn kin tɔk bɔt aw fɔ slit we dɛn kɔstɔmayz akɔdin to di tin dɛn we dɛn nid fɔ du wit blista-mashin ɛn wɛb-layout.
Plɛn PVC de gi rili limited mɔstɔ barɛri kɔmpia wit dediket ay-baria famasitik strɔkchɔ dɛn. i tipikli sεlekt usay di fכmyuleshכn in stεbiliti rikwaymεnt dεm kin mit wit kכvεshכnal PVC blista.
Nɔ, di we aw di wata we de na di bɔdi de tek wata, de tɔk bɔt di wata we di tin insɛf de tek. Mɔstɔ barɛri fɔ famasitik pak de bɛtɛ ɛvaluet yuz WVTR ɛn finish-pakɛj stebiliti ɔnda difayn tɛmpracha ɛn humiditi kɔndishɔn.
Plɛn PVC de gi klia, rigiditi ɛn thermoformability. PVC/PVDC ad wan PVDC barɛri kɔtin we de impruv mɔstɔ ɛn ɔksijɛn protɛkshɔn fɔ mɔ sɛnsitiv famasitik fɔmyulashɔn dɛn.
Fɔmyulashɔn dɛn we rili mɔstɔ ɔ ɔda we we dimand kin nid fɔ gɛt strɔng barɛri strɔkchɔ lɛk PCTFE-bɛs fim ɔ kol-fɔm aluminiɔm. Di chukchuk fɔ bi bays pan famasi stebiliti data ɛn pakej dizayn.
Kɔnvɛnshɔnal famasitik aluminiɔm lid kin yuz wan ɔt-sil lak we dɛn mek fɔ bon to PVC. Di ekzak foyl, lak ɛn PVC kɔmbaynshɔn fɔ tɛst togɛda fɔ establish di kɔmɛshɔnal silin winda.
Dɛn kin ebul fɔ evaluate di rayt gred fɔ di ay-spid blista prodakshɔn, bɔt di kɔmpatibiliti dipen pan di ɛksaktɔl mashin, di film tiknes, di itin profayl, di kaviti jɔyometri, di rol kɔnfigyushɔn ɛn di siling kɔndishɔn.
Suitabl rigid PVC kin evaluet wit ɔl tu di fɔm teknɔlɔji dɛn. Bikɔs dɛn saykl fɔ ɔt ɛn fɔm difrɛn, dɛn fɔ dɔn kwalifay pan di kɔmɛshɔn ikwipmɛnt we dɛn bin want fɔ yuz.
Yɛs. Transparent, tinted, kala ɛn opaque opshɔn dɛn kin tɔk bɔt togɛda wit glos, mat ɛn ɔda sɔfays rikwaymɛnt dɛn.
Kɔlɔ nɔmɔ nɔ de pruv se famasitik layt protɛkshɔn. Fɔtosɛnsitiv prodakt dɛn fɔ spɛsifa di rilevɛns wɛvlɛnj rɛnj ɛn maksimal transmishɔn, ɛn di pakej we dɔn fɔ validet akɔdin to dat.
Stɛrilayz mɛdikal-divays pak nid fɔ gɛt sɛpret validɛshɔn fɔ di matirial, lid sistɛm, sil intɛgriti, sterilayzeshɔn prɔses ɛn aplikebul mɛdikal-divays pak rikwaymɛnt dɛn. Dɛn nɔ fɔ tek am se i fit frɔm di wɔd famasitik PVC nɔmɔ.
Dipen pan yu kwalifayeshɔn sistɛm, aks fɔ di tɛknikal data shit, batch COA ɛn aplikebul famakopi, maykreshɔn, rɛsɛdyual monoma, rigyuletɔri ɔ kɔstɔma-spɛsifi k dɔkyumentri fɔ di ɛksaktɔ PVC gred.
di infכmeshכn we de naw na Wallis de list wan tכpik MOQ we na lεk 500 kg. Faynal MOQ ɛn trial-ɔda avaylabl dipen pan tik, wit, kɔlɔ, sɔfa ɛn kɔrɛnt prodakshɔn scheduling.
Yɛs. Sampul tɛst na rikɔmɛnd fɔ thermoforming, aluminium-lidding kɔmpatibiliti, mashin rɔn, kaviti apinans ɛn matirial kwaliti bifo dɛn apruv kɔmɛshɔnal saplai.
Duya gi di famasitik prodak, PVC tiknes, rol wit, kor saiz, kala, surface finish, blista-mashin model, cavity dimɛnshɔn, aluminium lidding spesifikeshɔn, rigyuletɔri rikwaymɛnt ɛn ɛstimat bay bay kwantiti.
Send Wallis yu PVC tiknes, rol wit, blista-mashin mɔdel, kaviti dimɛnshɔn, kɔlɔ, lidding fɔyl ɛn di kwantiti we yu de ɛkspɛkt fɔ bay. Wi kin tɔk bɔt rigid PVC fɔm film fɔ tablɛt, kapsul, nyutrasiutik ɛn famasitik blista pak.
If yu de riples wan famasi PVC spɔlayt we dɔn de, gi di TDS, COA ɔ rɛfrɛns rol we de naw so dat dɛn go ebul fɔ evalyu di tik, klia, tɛmfɔmin, silin ɛn mashin-rɔn we dɛn nid bifo dɛn prodyuz bɔku bɔku wan.
