|
edj bandin we dɛn kin yuz fɔ mek di ed
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Matirial: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis de saplae kɔstɔm PVC ɛn ABS mat edj band fɔ fɔnicha manifakta, kabinɛt faktri, panɛl prɔsesɔ, distribyushɔn, ɛn OEM prɔjɛkt. Di edj de kɔba ɛn protɛkt ɛksplɔz MDF, patikyulabɔd, plai wud, melamin, ɛn laminated panɛl edj dɛn we i de mek wan klin, kɔdinɛt finish.
Wi kin gɛt mat, ɔlta-mat, sɔft-tɔch, sɔlid-kɔlɔ, wud-grɛyn, ɛn ɛmbos sɔfays, wi fɔnicha edj bandin kin mach to yu bod sampul, kɔlɔ rɛfrɛns, tɛkstɔr, glos lɛvɛl, ɛn prodakshɔn rikwaymɛnt dɛn. Kastom wit, tik, rol lɔng, printin, ɛn pak de fɔ ɔlsay ɛn projɛkt-based ɔda.
Rikwest wan Sampul ɛn Faktɔri Kɔt
Di spesifikeshɔn dɛn we de kam biɛn ya de kɔba di standad rɛnj we dɛn sho fɔ dis prɔdak. Faynal dimɛnshɔn, tolɛreshɔn, sɔfayz kɔnstrɔkshɔn, prayma, ɛn pak fɔ kɔnfɔm akɔdin to yu fɔnicha bɔd ɛn edj band ikwipmɛnt.
| Atribyut | Avaylabl Spɛsifikeshɔn |
|---|---|
| Di Tin dɛn we Yu Go Yuz fɔ Du | PVC ɔ ABS , we dɛn pik akɔdin to di aplikeshɔn, prɔsesin, ɛn di tin dɛn we di makit nid |
| Tik we i tik | 0,4 mm–1,0 mm, ɛn di ɔda wan dɛn; kɔstɔm spesifikeshɔn dɛn we de |
| Wayd | 18 mm–60 mm, ɛn di ɔda wan dɛn; standad ɛn kɔstɔm wit dɛn de |
| Surface Finish na di wɔl | Mat, ɔlta-mat, sɔft-tɔch, sɔlid kɔlɔ, wud gren, print, ɔ ɛmbos tɛkstɔr |
| Di Kɔlɔ Maching | Kastamɔ panɛl sampul, fizik kɔlɔ sampul, Pantone, ɔ RAL rɛfrɛns |
| Di we aw dɛn de du di wok | Otomatik edj bandin mashin, sɛmi-ɔtomɛtik ikwipmɛnt, ɔ manual aplikeshɔn |
| Fɔ pak tin dɛn | Rol pak, katon pak, lɛbl, ɛn kɔstɔm ɛkspɔt pak |
Matt furniture ed banding wit kɔstɔmayz kɔlɔ, tɛkstɔr, wit, ɛn tik
Mat edj bandin de sɔpɔt di mɔdan fɔnicha dizayn dɛn bay we i de mek di glare nɔ bɔku ɛn i de mek wan smol transishɔn bitwin di panɛl sɔfays ɛn di edj we de na do. Wan kɔdinɛt edj de mek di kabinɛt domɔt dɛn, di fɔnicha frɔnt dɛn, di shelf dɛn, di woktɔp dɛn, di patishɔn dɛn, ɛn ɔda panɛl kɔmpɔnɛnt dɛn we pɔsin kin si, luk fayn.
Fɔ B2B prodakshɔn, di impɔtant sɛlɛkshɔn krayteria nɔto jɔs kɔlɔ bɔt na tɛkstɔr, glos lɛvɛl, tiknɛs tolɛreshɔn, fleksibiliti, trim bihayvya, adheshon, ɛn kɔmpitibliti wit di sɛlɛkshɔn bɔd ɛn edj bandin mashin. Wallis kin divεlכp di spεsifikεshכn arawnd yu apruv sεmpl εn prכsεsin kכndishכn dεm.
PVC edj banding na tin we dɛn kin yuz bɔku bɔku wan fɔ standad kabinɛt ɛn panɛl fɔnicha prodakshɔn. I de gi fleksibul prɔsesin, brayt dɛkɔretiv opshɔn dɛn, prɛktikal edj protɛkshɔn, ɛn kɔmpitishɔn kɔst fɔ ay-volyum manufakchurin.
ABS edj banding na in dɛn pik fɔ fɔnicha projɛkt dɛn we nid fɔ gɛt klorin-fri matirial opshɔn, gud impak pefɔmɛns, klin mashin, ɛn rili dimɛnshɔnal stebiliti. Di we aw dɛn de pik di matirial fɔ bi bay di ɛnd makit, di panɛl dizayn, di we aw dɛn de du di wok, ɛn di tin dɛn we dɛn nid fɔ du fɔ mek dɛn fala di lɔ.
| Ficha | Bɛnifit fɔ Fɛnichɔ Prodakshɔn |
|---|---|
| Mat ɛn Ultra-Mat Sɔfays dɛn | I de mek wan low-glare, contemporary appearance ɛn ɛp fɔ ridyus di visibiliti fɔ finga prɛnt ɛn smɔl handling mak dɛn. |
| Bɔd-to-Ɛj Match | Kɔdinɛt kɔlɔ, print, tɛkstɔr, ɛn glos lɛvɛl fɔ wan mɔ kɔnsistɛns finish fɔnicha kɔmpɔnɛnt. |
| Edj Protɛkshɔn | I de kɔba di panɛl ed dɛn we de na do ɛn ɛp fɔ protɛkt dɛn frɔm ɛvride impak, abrashɔn, dɔti, ɛn mɔstɔ we de na do. |
| Mashin Kɔmpatibiliti | Spɛsifikeshɔn dɛn kin ajɔst fɔ ɔtomɛtik, sɛmi-ɔtomɛtik, ɛn manual edj aplikeshɔn prɔses. |
| Dimenshɔn dɛn we dɛn kin kɔstɔm | Wid, tik, ɛn rol lɔng kin alaynɛd wit di bod dimɛnshɔn ɛn prodakshɔn-layn rikwaymɛnt. |
| OEM Sapɔt Sɔpɔt | Sɔpɔt sampul aprɔval, ripit prodakshɔn, kɔstɔm lɛbl, ɛkspɔt pak, ɛn bɔlk-ɔda kɔdineshɔn. |
Rol-fɔm edj banding we dɛn mek fɔ kɔnsistɛns fɔnicha-panɛl finish
Mat PVC ɛn ABS edj bandin fayn fɔ kabinɛt domɔt, bɔdi, shelf, drɔwa kɔmpɔnɛnt, wodrɔb panɛl, batrum vaniti, ɛn stɔrɔj sistɛm. di edj we dɛn mach fayn fayn wan de mek wan kɔdinɛt apinans akɔdin to di fes ɛn ed dɛn we pɔsin kin si.
Di tin dɛn we dɛn kin yuz na dɛsk, wok steshɔn, mitin tebul, risɛpshɔn kɔnta, patishɔn, skul fɔnicha, ɔtel fɔnicha, wɛlbɔdi fɔnicha, ɛn ɔda panɛl-based prɔdak dɛn we nid fɔ gɛt ed dɛn we dɛn dɔn dɔn fɔ lɔng tɛm.
Kastom kɔlɔ, print ifɛkt, ɛn tɛkstɔr kin sɔpɔt branded displei kabinɛt, stoa shelf, kɔnta, wɔl panɛl, ɛgzibishin fiks, ɛn kɔmɛshɔnal intɛriɔ projɛkt usay vijual kɔnsistɛns impɔtant.
Send yu panɛl sampul, laminat sampul, print dɛkɔ rɛfrɛns, Pantone kɔd, ɔ RAL kɔd. Wi tim kin evalyu di target kɔlɔ, print, tɛkstɔr, ɛn glos lɛvɛl ɛn pripia wan edj banding sampul fɔ aprɔval bifo bɔku prodakshɔn.
Yu kin pik dimenshɔn dɛn akɔdin to di tik we di panɛl tik, di ed dizayn we pɔsin kin si, di alawɛns fɔ trim, di spid we dɛn kin mek fɔ mek dɛn, di we aw dɛn kin handle di rol, ɛn di tin dɛn we dɛn nid fɔ pak. Duya gi di waid, tik, rol lɔng, ɛn di kwantiti we yu want fɔ ɔda we yu de aks fɔ kot.
Sɔfayz opshɔn dɛn kin divɛlɔp fɔ sɔlid-kɔlɔ bod, wud-greyn panɛl, ston ɔ fabrik ifɛkt, ɛn minimalist ɔlta-mat fɔnicha kɔllɛkshɔn. Sampul kɔnfɔmeshɔn de ɛp fɔ alaynɛs di ed wit di bod ɔnda di kɔndishɔn dɛn we dɛn bin want fɔ si ɛn layt.
OEM kɔstɔmayshɔn fɔ kɔlɔ, tɛkstɔr, dimɛnshɔn, rol lɔng, lɛbl, ɛn pak
Edj banding pefomans dipen pan di komplit prosesin sistem, inklud bod kondishon, banding matirial, prayma, adhesive, fid spid, preshos, temperechur, trimming tul, en ambient kondishon. Bifo mas prodakshɔn, tɛst di aprɔv sampul pan di aktual mashin ɛn sabstret.
Kɔnfɛm di panɛl matirial, di panɛl tik, di ed rɛdyus, ɛn di apia we dɛn nid fɔ dɔn.
Spɛsifik di edj bander mɔdel, adhesive tayp, ɛn nɔmal prɔsesin tɛmpracha.
Chek adheshon, trim kwaliti, kala mach, glos mach, en kona pefomans.
Apruv di prodakshɔn sampul bifo yu schedul di bɔku ɔda.
Fɔ ripit fɔnicha prodakshɔn, Wallis de pe atɛnshɔn pan di aprɔv spesifikeshɔn ɛn sampul. Inspekshɔn kin kɔba di matirial apinɛns, kɔlɔ kɔnsistɛns, sɔfays dɛfɛkt, waid, tik, rol kɔndishɔn, printin ɔ ɛmbos, pak, ɛn ɔda aydentifikeshɔn akɔdin to di kɔnfyus bay rikwaymɛnt dɛn.
Inkam ɛn prodakshɔn chɛk: raw matirial, kɔlɔ fɔmyulashɔn, sɔfays, ɛn dimɛnshɔnal kɔntrol.
Sampul-based aprɔval: dɛn kin kɔmpia prodakshɔn wit di kɔnfyus masta sampul ɔ di standad we dɛn gri.
Pak verifyeshɔn: rol protɛkshɔn, lɛbl, katon, paletayzeshɔn, ɛn shiping mak.
Ɔda traysabiliti: di prɔdak ɛn pak infɔmeshɔn de alaynɛd wit di ɔda dɔkyumɛnt dɛn we dɛn dɔn kɔnfyus.
Gi di matirial prɛferɛns, kɔlɔ ɔ bod sɛmpul, wit, tik, rol lɔng, sɔfays finish, adhesive ɔ prayma rikwaymɛnt, mashin infɔmeshɔn, kwantiti, ɛn dɛstineshɔn makɛt.
Wallis go evalyu di projɛkt ɛn kɔnfɔm fisibul spɛsifikɛshɔn, sampul arenjmɛnt, kot besis, prodakshɔn rikwaymɛnt, ɛn ɛkspɔt pak ditil.
Test di sampul pan yu bod ɛn prodakshɔn ikwipmɛnt. Afta dɛn dɔn gri fɔ di kɔlɔ, di tɛkstɔr, di dimɛnshɔn, di adheshon, ɛn di prɔsesin pefɔmɛns, di sampul we dɛn dɔn kɔnfyus kin bi di rɛfrɛns fɔ bɔlk manufakchurin.
Send Yu Edge Banding Rikwaymɛnt dɛn
Shanghai Wallis Technology Co., Ltd. de saplae plastic dekorativ matirial ɛn kɔstɔmayz edj banding sɔlvishɔn fɔ fɔnicha manifakta, panɛl prɔsesɔ, prɔjek kɔntrakta, distribyushɔn, ɛn OEM kɔstɔma dɛn. Wi savis kɔba spesifikeshɔn rivyu, dɛkɔretiv maching, sampul divɛlɔpmɛnt, prodakshɔn kɔdineshɔn, kwaliti inspekshɔn, ɛn ɛkspɔt pak.
If yu projɛkt nid mat PVC edj bandin, mat ABS edj bandin, sɔft-tɔch edj, sɔlid kɔlɔ, wud-gren maching, ɔ kɔstɔm dimɛnshɔn, kɔntak Wallis wit yu bɔd sampul ɛn prodakshɔn ditil fɔ wan tayla prɔpɔzal.
Wallis Plastic sɛtifiket ɛn kwaliti dɔkyumentri
Wallis de sɔpɔt intanashɔnal B2B inkyɔri fɔ standad prodak, kɔstɔm kɔlɔ, ripit ɔda, ɛn prɔjɛkt-bɛs spɛsifikɛshɔn. Klia tɛknikal kɔmyunikeshɔn, aprɔv sɛmpul, pak kɔnfɔmeshɔn, ɛn prodakshɔn fɔlɔp de ɛp fɔ ridyus di risk fɔ bay fɔ ovasi kɔstɔma dɛn.
Prodakshɔn kɔdineshɔn ɛn ɛkspɔt-ɔda sɔpɔt
Fɔnicha edj banding projɛkt dɛn kin nid sɔm rawnd dɛn fɔ spɛsifikɛshɔn, sampul, ɛn kɔlɔ kɔnfɔmeshɔn. Wallis de gi dairekt kɔmyunikeshɔn ɔlsay na di inkwyuiz, sampul, prodakshɔn, inspekshɔn, ɛn shipmɛnt stej fɔ ɛp di wan dɛn we de bay fɔ mek dɛn kɔntinyu fɔ gɛt kɔnsistɛns di prɔjek rikwaymɛnt dɛn.
Dɛn kin yuz mat edj band fɔ kɔba ɛn dɔn di ed dɛn we de na do na MDF, patikyulabɔd, plai wud, melamin-fes bod, laminat bod, ɛn ɔda fɔnicha panɛl dɛn. I de mek yu luk fayn ɛn i de gi yu prɛktikal ed protɛkshɔn.
PVC na wan we dɛn pik bɔku bɔku wan fɔ fleksibul, kɔst-ɛfishin fɔnicha prodakshɔn ɛn i de gi bɔku bɔku kɔlɔ ɛn tɛkstɔr opshɔn dɛn. ABS na klorin-fri ɔltɛrnativ wit gud impak pefɔmɛns ɛn mashinability. Di bɛst opshɔn dipen pan di prɔjek, di ikwipmɛnt, di target makit, ɛn di tin dɛn we dɛn nid fɔ du fɔ mek dɛn obe di lɔ.
Wallis kin divɛlɔp wan klos kɔlɔ, print, tɛkstɔr, ɛn glos mach bays pan wan ɔrijinal bod ɔ laminat sampul. Bikɔs di skrin kɔlɔ ɛn dijital fayl dɛn kin difrɛn, dɛn kin advays fɔ mek dɛn tek wan fizik sampul ɛn prodakshɔn aprɔval fɔ impɔtant maching prɔjek dɛn.
Yɛs. Wi kin tɔk bɔt di wayd, tik, di rol lɔng, di kɔlɔ, di say we dɛn de, di we aw dɛn print am, di lɛbl dɛn, ɛn aw fɔ pak am akɔdin to di kwantiti we yu ɔda ɛn di tin dɛn we yu nid fɔ mek.
I kin saplae fɔ ɔtomatik ɛn sɛmi-ɔtomɛtik edj bandin prɔses, ɛn bak fɔ sɛlɛkɛt manual aplikeshɔn dɛn. Gi yu ikwipmɛnt, adeziv, tɛmpracha, fid spid, ɛn bod infɔmeshɔn so dat dɛn go ebul fɔ evalyu di spɛsifikɛshɔn bifo dɛn prodyuz.
Kompatibl adhesive sistem dipen pan di edging konstrakshɔn, prayma, sabstret, ikwipmɛnt, ɛn savis kɔndishɔn. Kɔmɔn fɔnicha prodakshɔn de yuz ɔt-mɛlt sistem, bɔt di kɔmplit prɔses fɔ tɛst ɛn kɔnfɔm wit di adeziv ɛn mashin saplay dɛn.
Mat ɛn ɔlta-mat sɔfays dɛn jɔs de sho smɔl glare ɛn i kin mek finga prɛnt ɛn smɔl mak dɛn nɔ de si pas di finish dɛn we de shayn. Aktual skrach ɛn finga prɛnt pefɔmɛns dipen pan di sɔfayz kɔnstrɔkshɔn we yu dɔn pik ɛn dɛn fɔ kɔnfyus am wit wan sampul we dɛn dɔn gri fɔ.
Duya gi di PVC ɔ ABS prɛferɛns, wit, tik, rol lɔng, kɔlɔ ɔ bod sampul, finish, kwantiti we dɛn nid, mashin ɔ prɔsesin ditil, pak riŋwe, di kɔntri usay yu want fɔ go, ɛn ɛni tɛst ɔ kɔmplians rikwaymɛnt.
Yɛs. Sampul rivyu na rikɔmɛnd so yu kin evalyu kɔlɔ, tɛkstɔr, glos, dimɛnshɔn, adheshon, trim, ɛn mashin pefɔmɛns bifo yu kɔnfɔm mas prodakshɔn.
