|
edj bandin we dɛn kin yuz fɔ mek di ed
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Matirial: | |
| Aplikeshɔn: | |
| Surface: | |
| Kwantiti: | |
Wallis de saplae excimer supa mat edj banding fɔ prɛmiɔm fɔnicha manifakta, kabinɛt faktri, panɛl prɔsesɔ, intɛriɔ kɔntrakta, distribyushɔn ɛn OEM prɔjek. Di ɔlta-lɔ-glos sɔfays dɛn mek am fɔ kɔdinɛt wit ɛksayz-finish ɛn ɔda prɛmiɔm supa-mat fɔnicha panɛl dɛn, we de mek wan kɔnsistɛns apinans frɔm di panɛl fes to di ɛksplɔz edj.
I de insay PVC ɛn ABS, Wallis sɔft-tɔch edj banding de kam togɛda wan elegant mat apinans wit anti-finga prɛnt, izi-klin ɛn skrach-rɛsistant sɔfays opshɔn dɛn. Kɔlɔ, glos, tɔch, wit, tik, rol lɔng, prayma, lɛbl ɛn ɛkspɔt pak kin kɔstɔmayz akɔdin to di aprɔv fɔnicha bɔd ɛn prɔsesin rikwaymɛnt.
Fɔ krichɔl prɔjek dɛm, di wɔd 'excimer edge banding' fɔ kɔnfyus agens di sɔfayz kɔnstrɔkshɔn we dɛn nid. I kin rifer to edging we dɛn prodyuz wit wan ɛksayma-kyured kɔtin ɔ to wan ɔlta-mat edj we dɛn divɛlɔp fɔ mach wan panɛl we dɛn dɔn dɔn ɛkszayma. Wallis rikɔmɛnd fɔ apruv wan fizik sampul ɛn tɛknikal spɛsifikɛshɔn bifo mas prodakshɔn.
Rikwest wan Supa Mat Maching Sampul
Di spesifikeshɔn dɛn we de dɔŋ ya de sho di prɔdak rɛnj we dɛn sho na dis pej. Faynal tolerans, target glos, surface pefomans, prayma, rol length ɛn pak fɔ kɔnfɔm akɔdin to di matirial we dɛn dɔn pik, bod sampul, edj bander ɛn ɔda kwantiti.
| Item | Avaylabl Spɛsifikeshɔn |
|---|---|
| Sɔntin | Excimer supa mat / soft-toch furniture ed banding |
| Tin dɛn | PVC ɔ ABS |
| Surface Finish na di wɔl | Ultra-mat, supa mat, sɔft tɔch, skin-fil ɔ kɔstɔma-apruv lɔw-glos finish |
| Wayd | 12 mm–80 mm, ɛn di ɔda wan dɛn; kɔstɔmayt wit dɛn de |
| Tik we i tik | 0,4 mm–3,0 mm, ɛn di ɔda wan dɛn; sɔbjɛkt to matirial ɛn sɔfayz kɔnstrɔkshɔn |
| Di Lɛngth fɔ Rol | 100 m–300 m fɔ wan rol; kɔstɔmayz pak we de ɔnda di spɛsifikɛshɔn |
| Standart Kɔlɔ dɛn | Wait, blak, grey, beige, taupe, grafayt ɛn kɔstɔmayt kɔlɔ dɛn |
| Di Fɔnkshɔn dɛn we di Surface De Du | Anti-finga prɛnt, sɔft-tɔch, anti-shin, izi-klin ɛn skrach-rɛsistɛns opshɔn dɛn |
| Panel Matching we dɛn de mek | Kɔlɔ, glos ɛn taktil maching to aprɔv ɛksayz ɔ supa-mat fɔnicha panɛl dɛn |
| Di we aw dɛn de du di wok | Otomatik ɛn sɛmi-ɔtomɛtik edj banding wit wan kɔmpatibl prayma ɛn adeziv sistɛm |
| OEM Savis we dɛn de yuz | Kastom kɔlɔ, dimɛnshɔn, rol, lɛbl, katon ɛn ɛkspɔt pak |
| MOQ we gɛt fɔ du wit am | Dipen pan matirial, kɔlɔ, dimɛnshɔn, kɔtin ɛn kɔstɔmayshɔn rikwaymɛnt |
Excimer curing na surface-finishing process we dɛn kin yuz fɔ mek very low-gloss lacquered surfaces wit smooth ɔ micro-textured appearance. Insay fɔnicha sistɛm, di wɔd 'excimer' gɛt fɔ du wit ɔlta-mat panɛl, anti-finga prɛnt pefɔmɛns ɛn wan wam, velvety tɔch.
Di maching ed banding fɔ riprodyuz di panɛl in visible kala ɛn glos we i de mentɛn bak wan sem kayn taktil karakta. Bikɔs panɛl ɛn edj prɔdak dɛn kin yuz difrɛn sabstret ɔ kɔtin prɔses, dɛn fɔ jɔj wan ɛksaktɔl mach frɔm di kɔmpɔnɛnt we dɔn dɔn pas frɔm wan kɔlɔ kɔd nɔmɔ.
Wan edj we dɛn dɔn kɔrɛkt wit ɛksayma gɛt wan kɔtin we dɛn kin rili prosɛs bay we dɛn de yuz ɛksayma tɛknɔlɔji. wan εksayma-match edj dεn divεlכp fכ vishכnal εn takchually mach wan εksima panεl bכt i kin yuz כda apruv sכfayz prכsεs. Di wan dɛn we de bay fɔ spɛsifa if di manufakchurin teknɔlɔji insɛf na mandatory ɔ if di rizɔlt we dɛn nid na wan maching supa-mat, anti-finga prɛnt sɔfays.
'Super matte' nɔto kɔmplit tɛknikal spɛsifikɛshɔn. Stet di target glos yunit, mɛzhɔmɛnt angul, alaw tolɛreshɔn ɛn rɛfrɛns sampul. Wan valyu lɛk 3–6 glos yunit dɛn kin yuz fɔ sɔm prɛmiɔm mat sistɛm dɛn, bɔt di las target fɔ gri fɔ di bɔd ɛn edj kɔnstrɔkshɔn we dɛn dɔn pik.
Di low-riflekshɔn finish de mek wan kol, prɛmiɔm vijual ifɛkt fɔ minimalist fɔnicha. I de wok mɔ fɔ blak, grafayt, taupe, beige ɛn ɔda sɔlid-kɔlɔ dɛkɔ usay inkɔnsistɛns glos bitwin di bod ɛn ed go ɔdasay go rili si.
Anti-finga prɛnt sɔfays de ridyus di visibiliti fɔ nɔmal tɔch mak, skin ɔyl ɛn smud. Dɛn fɔ evalyu di wok we dɛn de du pan dak kɔlɔ dɛn, usay dɛn kin notis di finga prɛnt dɛn mɔ, ɛn dɛn fɔ inklud ɔl tu di fɔs we aw i tan ɛn di we aw i kin klin afta dɛn dɔn ol am bak.
Wan soft-tɔch finish de gi di fɔnicha ed wan smol, wam ɛn skin-layk taktil kwaliti. Di taktil mats fɔ kɔmpia dairekt wit di panɛl bikɔs tu sɔfays we gɛt di sem glos valyu kin stil fil notis difrɛn.
Ripit rɔb, skrap ɔ buf kin mek shayn spat pan ɔdinari mat edj. Premium supa-mat edging fɔ bi evaluate fɔ resistans to polishing ɛn visible sheen, patikyula afta mashin prɔsesin ɛn insay ay-kɔntakt fɔnicha aplikeshɔn.
Opshɔn dɛn de we nɔ de skrach ɛn we izi fɔ klin, bɔt di rial wok we dɛn de du de dipen pan di we aw dɛn de kɔt di say we dɛn de, di tin dɛn we dɛn de yuz, di kɔlɔ ɛn di we aw dɛn de tɛst am. Dak, smol mat sɔfays kin sho fayn skrach izi wan pas layt ɔ tɛkstɔr sɔfays, so aprɔval tɛst fɔ sho di fɔnicha we dɛn want fɔ yuz.
Ultra-mat apinɛns, sɔft tɔch ɛn ridyus finga prɛnt visibiliti
Wan kɔmpɔnɛnt we gɛt ay kwaliti nɔ jɔs nid fɔ gɛt di sem kɔlɔ. Di ed fɔ kɔdinɛt wit di panɛl insay bays shed, ɔndatɔn, glos, sɔfays smol ɛn taktil fil. Smɔl difrɛns pan glos kin bi klia ɔnda sayd layt ivin we di kɔlɔ de sho kɔrɛkt frɔm di frɔnt.
Dijital imej, monita displei, RAL rɛfrɛns ɛn Pantone kɔd kin sɔpɔt di fɔs kɔlɔ sɛlɛkshɔn bɔt dɛn nɔ kin sho di ɛksaktɔ glos ɔ tɔch fɔ wan ɛksayma panɛl. Send wan ɔrijinal panɛl, laminat ɔ apruv edging sampul fɔ kɔrɛkt divɛlɔpmɛnt.
Kɔmpia di bod ɛn ed we dɔn dɔn ɔnda difyuz de layt, wam indo layt ɛn dairekshɔn sayd layt. Dak supa-mat kɔlɔ kin sho difrɛns pan glos, ed waytin, adhesive layn ɛn sɔfayz mak mɔ strɔng ɔnda lɔw-angle iluminɛshɔn.
Di aprɔval we dɛn kin abop pan pas ɔl na panɛl kɔmpɔnɛnt we dɛn prosɛs wit di bod, ed, adeziv ɛn mashin sɛtin dɛn we dɛn want. Evaluate di fes-to-edj transishɔn, bond layn, trim, kɔna rawndin, buf ɛn finga prɛnt bihayvya bifo mas prodakshɔn.
| Seleksi Faktor | PVC supa mat edj | ABS supa mat edj |
|---|---|---|
| Di Praymari Bɛnifit | Fleksibul, kɔst-ɛfishin ɛn i de insay brayt dimɛnshɔn ɛn kɔlɔ dɛn. | Klɔrin-fri matirial wit gud tafnɛs, dimɛnshɔnal stebiliti ɛn mashin pefɔmɛns. |
| Tipik Projɛkt dɛn | Rezidenshɛl kabinɛt, wodrɔb, wɔl panɛl ɛn volyum fɔnicha prodakshɔn. | Premium furniture, komershal intɛriɔ ɛn prɔjek dɛn we de spɛsifa ABS. |
| Di Opshɔn dɛn fɔ di Surface | Ultra-mat, sɔft-tɔch, anti-finga prɛnt ɛn kɔstɔm kɔlɔ finish. | Ultra-mat, sɔft-tɔch, anti-finga prɛnt ɛn maching panɛl finish. |
| Di we aw dɛn de pik di pɔsin | Pik akɔdin to prayz, fleksibiliti, saiz ɛn target-maket rikwaymɛnt. | Pik akɔdin to di matirial polisi, impak pefɔmɛns ɛn prɔsesin rikwaymɛnt. |
Di surface coating kin inflɔws pefɔmɛns as mɔ as di bays polima. Apruv di aktual kɔt PVC ɔ ABS sampul pas fɔ tek am se ɔl di prɔdak dɛn we dɛn mek wit di sem matirial go gɛt di sem skrach, tɔch ɔ finga prɛnt pefɔmɛns.
Prɛmiɔm mat edj nid fɔ kɔntrol prɔses bikɔs pasmak ɔt, prɛshɔn, skrap ɔ baf kin chenj di sɔfays glos. Provayd di edj bander model, fid spid, adhesive sistem, panɛl matirial ɛn rikwayd finish edj bifo yu ɔda.
EVA na kɔmɔn fɔ yuz fɔ standad indo fɔnicha prodakshɔn. Adhesive temperechur, opin tɛm, prɛshɔn ɛn fid spid fɔ fala di adhesive spɔlayt in instrɔkshɔn ɛn dɛn fɔ tɛst am wit di bak prayma we yu dɔn pik.
PUR kin gi impɔtant resistans to ɔt ɛn mɔstɔ ɛn bɔku tɛm dɛn kin pik am fɔ prɛmiɔm kichin, batrum ɛn dimand fɔnicha kɔmpɔnɛnt dɛn. Kompatibiliti wit di ed prayma ɛn mashin fɔ kɔnfyus bifo bɔlk prodakshɔn.
Kɔnfɛm if dɛn nid fɔ protɛkt fim ɛn i kɔmpitabl wit di prodakshɔn layn.
Yuz shap trim tul dɛn ɛn kɔntrol skrap prɛshɔn.
Nɔ buf pasmak we go mek yu gɛt lokal glos ɔ polish mak.
Chek di kɔna rawndin fɔ wayt, kɔtin damej ɛn glos chenj.
Inspek dak kɔlɔ dɛn ɔnda sayd layt afta ɔl di mashin wok.
Laser, hot-air, NIR ɛn ɔda ziro-joint teknɔlɔji dɛn nid fɔ gɛt kɔmpitabl fɛnshɔnal layt. Standard primed edging nɔ fɔ trit as zero-joint matirial pas di prodak kɔnstrɔkshɔn ɛn prɔsesin teknɔlɔji spɛshal wan kɔnfyus.
Supa-mat edj de mek wan kɔdinɛt finish fɔ kabinɛt domɔt, drɔwa frɔnt, bɔdi, kichin ayland ɛn pantri sistem. Anti-finga prɛnt sɔfays dɛn kin yus mɔ pan dak ɛn we dɛn kin tɔch bɔku tɛm fɔnicha frɔnt.
Ultra-mat edj dɛn de sɔpɔt minimalist wodrɔb domɔt, shelf, drɔwa yunit ɛn fit stɔrɔj sistem usay kɔnsistɛns kɔlɔ ɛn lɔw riflɛkshɔn impɔtant fɔ di dizayn.
Di aplikeshɔn dɛn inklud ɛgzibit dɛsk, ɔfis stɔrɔj, risepshɔn kɔnta, mitin tebul, rital fiks ɛn ɔtel fɔnicha we nid prɛmiɔm taktil sɔfays ɛn pɔshɔnal apia.
TV yunit, saydbɔd, shelf, displei kabinɛt ɛn modular stɔrɔj kin yuz supa-mat edj fɔ kɔdinɛt wit mɔdan sɔlid-kɔlɔ ɛn sɔft-tɔch fɔnicha panɛl dɛn.
Matching edging kin finish dekorativ wol panɛl, intɛriɔ domɔt, patishɔn ɛn fit kes wok na rɛzidɛshɔnal, ɔspitul, rital ɛn kɔmɛshɔnal prɔjek dɛn.
Premium ultra-mat edging fɔ rɛzidɛshɔnal ɛn kɔmɛshɔnal fɔnicha sistem dɛn
Wallis de gi fashɔn nyutral ɛn dak kɔlɔ dɛn we dɛn kin yuz fɔ ɛksayz ɛn prɛmiɔm mat fɔnicha:
Super mat wit wayt
Super mat blak we yu de yuz
Titanium Grey we gɛt di taytul
Kashmir Beige we dɛn kɔl
Taupe Grey we dɛn kɔl
Grafayt Blak we dɛn mek
Kastamayz kɔlɔ dɛn bays pan fizik panɛl sɛmpul dɛn
Dak mat kɔlɔ dɛn nid fɔ tek tɛm inspɛkt am mɔ bikɔs finga prɛnt, fayn fayn skrach, ed wayt ɛn glos we de chenj kin si mɔ pas layt kɔlɔ. Sampul aprɔval fɔ inklud ɔl tu di matirial we dɛn nɔ tɔch ɛn wan kɔmpɔnɛnt we dɔn dɔn wit mashin-band.
Wallis kin divɛlɔp di bays shed ɛn lɔw-glos sɔfays akɔdin to wan fizik ɛksayz panɛl, lak bod, fɔnicha fim, laminat ɔ apruv rɛfrɛns edj.
Yu kin pik dimɛnshɔn akɔdin to di panɛl tik, visible-edj dizayn, trim alawɛns, mashin spid ɛn rol-hanlin rikwaymɛnt. Gi di target saiz ɛn ɛni ia ɔ prɔjek dimand fɔ fisibiliti rivyu.
OEM opshɔn dɛn kin inklud rol lɛbl, kɔstɔma prodak kɔd, katon mak, protɛktiv wrap, palet ɛn ɛkspɔt shiping mak. Pak fɔ protɛkt di sɔft-tɔch sɔfays frɔm prɛshɔn, dɔst, abrashɔn ɛn kɔntaminɛshɔn.
Supa-mat edging nid ɔl tu dimɛnshɔnal inspekshɔn ɛn sɔfa inspekshɔn. Prodakshɔn fɔ kɔmpia wit wan masta sampul we dɛn dɔn gri fɔ ɛn di we dɛn we dɛn gri fɔ mɛzhɔ.
Kɔlɔ: shed, ɔndatɔn ɛn batch kɔnsistɛns ɔnda aprɔv laytin.
Glos: mɛzhɔmɛnt angle, target valyu, tolɛreshɔn ɛn yunifɔmiti along di rol.
Tɔch: taktil kɔmpiashɔn wit di panɛl ɛn sampul we dɛn dɔn gri fɔ.
Surface: finga prɛnt, skrat, polish, stɛyn, kɔntaminɛshɔn ɛn kɔtin dɛfɛkt.
Dimenshɔn: wit, tik, rol lɔng ɛn edj stret.
Prɔsesin: adheshon, trim, skrap, buf ɛn kɔna-raun apia.
Pak: rol protɛkshɔn, lɛbl, katon, palet kɔndishɔn ɛn traceability.
Gi di ɔrijinal ɛksayma ɔ supa-mat panɛl, matirial prɛferɛns, target glos, wit, tik, rol lɔng, kwantiti, mashin mɔdel, adhesive tayp, pak rikwaymɛnt ɛn dɛstineshɔn kɔntri.
Stet if aktual excimer curing na mandatory ɔ if di rikwaymɛnt na maching supa-mat, sɔft-tɔch ɛn anti-finga prɛnt rizɔlt. Wallis go rivyu di matirial, di kɔtin, di dimɛnshɔn ɛn di prɔjek volyum.
Kɔmpia kɔlɔ, glos, tɔch, finga prɛnt visibiliti, klin ɛn skrach bihayvya wit di panɛl ɔnda di layt we yu want.
Aplay di sampul yuz di aktual panɛl, adeziv ɛn edj band. Kɔnfɛm adheshon, glu layn, trim, skrap, kɔna rawndin, baf ɛn ɛni chenj na di mat sɔfays.
Ritain di apruv panɛl, ed ɛn finish kɔmpɔnɛnt as rɛfrɛns. Kɔnfɛm di fayn spɛsifikɛshɔn, kwantiti, lɛbl, pak, inspekshɔn krayteria ɛn shipmɛnt ditil bifo dɛn prodyuz.
Send Yu Panɛl Sampul ɛn Rikwaymɛnt dɛn
Wallis de rivyu di kɔlɔ, glos, tɔch ɛn prɔsesin rikwaymɛnt dɛn togɛda, ɛp di wan dɛn we de mek fɔnicha fɔ avɔyd wan ed we mach di kɔlɔ bɔt nɔto di sɔfayz karakta fɔ di bod.
Baya dɛn kin kɔmpia PVC ɛn ABS akɔdin to kɔst, dimɛnshɔnal rikwaymɛnt, matirial polisi, mashin ɛn ɛnd-yuz pefɔmɛns insay wan sɔs projɛkt.
Wallis de sɔpɔt sampul pripiamɛnt, kɔstɔm dimɛnshɔn, rol lɛbl, protɛktiv pak, inspekshɔn ɛn ɛkspɔt-ɔda kɔdineshɔn fɔ fɔnicha faktri, distribyushɔn ɛn prɔjek kɔstɔma dɛn.
Wallis sɛtifiket ɛn kwaliti dɔkyumentri
Wallis de sɔpɔt fɔnicha faktri, kabinɛt manifakta, panɛl prɔsesɔ, ɔlsay ɛn intɛriɔ prɔjek bayer na intanashɔnal makit. Klia spɛsifikɛshɔn, aprɔv sɛmpul ɛn prodakshɔn-layn tɛst de ɛp fɔ ridyus kɔlɔ, glos ɛn prɔsesin difrɛns insay ripit ɔda.
Prodakshɔn kɔdineshɔn ɛn intanashɔnal B2B sɔpɔt
Prɛmiɔm mat projɛkt dɛn kin nid sɔm rawnd dɛn fɔ kɔlɔ, glos, tɔch ɛn mashin aprɔval. Wallis de pe atɛnshɔn pan klia kɔmyunikeshɔn, masta-sampul kɔntrol, protɛktiv pak ɛn stebul ripit prodakshɔn fɔ lɔng tɛm fɔnicha program dɛn.
Na premium furniture edging wit wan ultra-low-gloss surface we dɛn divɛlɔp fɔ excimer-finished ɔ ɔda supa-mat panɛl dɛn. dipכnt pan di spεsifikεshכn, di ed kin yuz wan εksima-kכyr kכt כ כda sכfayz tritmεnt we dεn dεn fכ gi wan sεm kayn vishכnal εn tכktil risכlt.
Nɔ. 'Super matte' de tɔk bɔt di we aw i tan, we 'excimer' de tɔk bɔt wan patikyula kɔring teknɔlɔji ɔ wan panɛl kategori na sɔm makit dɛn. Kɔnfɔm di kɔtin kɔnstrɔkshɔn we ɛksayma prɔsesin insɛf na mandatory rikwaymɛnt.
Yɛs. Wallis kin divεlכp kכla, glos εn taktil maching frכm wan כrijinal panεl כ laminat sεmpl. Di komponent we dɔn dɔn fɔ gɛt aprɔval bikɔs bod ɛn ed kin yuz difrɛn sabstret ɛn kɔtin prɔses.
Ultra-lɔ-glos opshɔn dɛn de, bɔt di target fɔ spɛsifa yuz wan mɛzhɔmɛnt angle, glos-yunit valyu, tolɛreshɔn ɛn fizik rɛfrɛns. Di rizulyt we pɔsin kin ebul fɔ gɛt dipen pan di matirial, di kɔtin ɛn di kɔlɔ.
Anti-finga prɛnt tritmɛnt de ridyus di visibiliti fɔ finga prɛnt ɛn smud; i nɔ de stɔp ɔl di mak dɛn ɔnda ɛvri kɔndishɔn. Dak kɔlɔ, an dɛn we gɛt ɔyl, layt ɛn klin we dɛn kin klin kin afɛkt di rizɔlt we pɔsin kin si.
Opshɔn dɛn de we nɔ go skrach. Aktual resistans dipen pan di kotin, bays matirial, kala en test we. Samplε dεm fכ tεst we di ed go εkspos to dimand prodakshכn כ savis kכndishכn.
Yɛs. I kin pripia fɔ standad ɔtomɛtik ɛn sɛmi-ɔtomɛtik edj band dɛn. Di mashin sɛtin fɔ protɛkt di mat kɔtin frɔm ɔt pasmak, prɛshɔn, skrap ɛn baf.
Kompatibl bak prayma kin spɛsifa fɔ fayn EVA ɔ PUR hot-mɛlt sistɛm dɛn. Di ed, prayma, adeziv, panɛl ɛn mashin fɔ tɛst as wan prodakshɔn sistɛm.
Ziro-joint edging nid fɔ gɛt wan funkshɔnal layt we kɔmpitabl wit laser, hot air, NIR ɔ ɔda spɛsifikɛd teknɔlɔji. Rikwest dis kɔnstrɔkshɔn sɛpret frɔm standad primed edj banding.
Yɛs. Wallis de sɔpɔt kɔstɔmayz dimɛnshɔn, kɔlɔ, glos lɛvɛl, rol lɔng, lɛbl ɛn pak akɔdin to tɛknikal fisibiliti ɛn ɔda kwantiti.
Yɛs. Dɛn kin arenj sampul fɔ kɔlɔ, glos, tɔch, finga prɛnt, skrach ɛn mashin-prɔsɛsin ɛvalueshɔn. Kastom sampul rikwaymɛnt dɛn dipen pan di spesifikeshɔn we dɛn aks fɔ.
Send di panɛl sampul, matirial, target glos, wit, tik, rol lɔng, kwantiti, mashin mɔdel, adhesive tayp, pak we dɛn nid, di kɔntri usay dɛn de go ɛn di tɛst ɔ kɔmplians dɔkyumɛnt dɛn we dɛn nid.
