|
Faktri-saplai akrilik, PVC ɛn ABS edj band fɔ kabinɛt ɛn fɔnicha. Watapruf, anti-skrat ɛn kɔstɔmayz in kɔlɔ, finish, wit, tik, rol lɔng ɛn pak fɔ OEM ɔda.
edj bandin we dɛn kin yuz fɔ mek di ed
Wallis we nem Wallis
| Kɔlɔ: | |
|---|---|
| Matirial: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis de saplae kɔstɔm watapruf ɛn anti-skrach akrilik, PVC ɛn ABS edj band fɔ fɔnicha faktri, kabinɛt manifakta, panɛl prɔsɛsɔ, intɛriɔ kɔntrakta, distribyushɔn ɛn OEM prɔjɛkt. Di ed strip dɛn kɔba ɛksplɔz MDF, patikyulabɔd, plai wud, melamin ɛn laminated panɛl edj dɛn, we de ɛp fɔ protɛkt di bod kɔr we dɛn de mek wan klin, kɔdinɛt fɔnicha finish.
Pik frɔm ay-glos akrilik, mat ɔ tɛkstɔr PVC , durable ABS , sɔlid kɔlɔ, wud-greyn dizayn ɛn kɔstɔm print ifɛkt. Wid, tik, rol lɔng, kɔlɔ, tɛkstɔr, glos lɛvɛl, prayma ɛn ɛkspɔt pak kin divɛlɔp rawnd yu bod sampul ɛn prɔsesin rikwaymɛnt.
Rikwest Samples ɛn wan Factory Quote
Di spesifikeshɔn dɛn we de dɔŋ ya de sho di prɔdak rɛnj we de fɔ dis pej. Faynal tolerans, rol lɔng, sɔfayz kɔnstrɔkshɔn, prayma ɛn pak fɔ kɔnfɔm akɔdin to di matirial we dɛn dɔn pik, ɔda kwantiti, fɔnicha bɔd ɛn edj banding ikwipmɛnt.
| Item | Avaylabl Spɛsifikeshɔn |
|---|---|
| Di tin dɛn we dɛn kin yuz fɔ mek tin dɛn | PVC , ABS ɛn akrilik/ PMMA |
| Tik we i tik | 0,4 mm–3,0 mm, ɛn di ɔda wan dɛn; kɔstɔm tiknɛs we de ɔnda di matirial ɛn ɔda rivyu |
| Wayd | 15 mm–80 mm, ɛn di ɔda wan dɛn; standad ɛn kɔstɔm wit dɛn de |
| Surface Finish na di wɔl | Ay glos, mat, ɔltra-mat, sɔlid kɔlɔ, wud gren, tɛkstɔr, print ɔ 3D dip ifɛkt |
| Di Kɔlɔ Maching | Fizik bod sampul, laminat sampul, Pantone, RAL ɔ apruv kɔlɔ rɛfrɛns |
| Mɔstɔ Pɔfɔmɛnshɔn | Tɛmplastik matirial dɛn we nɔ de mek wata; finished-joint pefomans dipen pan adhesive, mashin setin en aplikeshon kwaliti |
| Skrach Pɔfɔmɛnshɔn | Anti-skrat sɔfays dɛn we de; di pefɔmɛns kin difrɛn bay di matirial, lak, tɛkstɔr ɛn finish |
| Di we aw dɛn de du di wok | Otomatik, sɛmi-ɔtomɛtik ɛn sɛlɛkɛt manual edj bandin prɔses |
| Kastamayzeshɔn | Matirial, kɔlɔ, dizayn, glos, tɛkstɔr, dimɛnshɔn, rol lɔng, lɛbl ɛn pak |
Kastom akrilik, PVC ɛn ABS edj band fɔ fɔnicha ɛn kabinɛt panɛl
Di wud panɛl dɛn we dɛn dɔn mek wit injinia nid fɔ gɛt ed we dɛn dɔn dɔn fɔ mek dɛn luk fayn ɛn fɔ mek dɛn protɛkt dɛn fayn fayn wan. Di edj banding we dɛn pik ɛn aplay kɔrɛkt wan de kɔba di bod kɔr we de na do, i de ridyus dairekt kɔntakt wit mɔstɔ ɛn dɔti, i de stɔp di edj chip ɛn i de mek wan kɔmpɔnɛnt fɔ di fɔnicha we sef, we smol.
Edj kwaliti kin afɛkt bak di valyu we dɛn kin tink bɔt fɔ kabinɛt, wodrɔb, dɛsk, shelf ɛn kɔmɛshɔnal fiks. Kɔlɔ nɔmɔ nɔ inof: prɔfɛshɔnal rizɔlt nid fɔ kɔdinɛt di ed ɛn bɔd insay dɛkɔ, tɛkstɔr, glos lɛvɛl, tik ɛn jɔyn apia . Fɔ impɔtant prɔjek dɛm, dɛn fɔ gri fɔ mek dɛn mach agens wan ɔrijinal fizik bɔd sampul.
PVC edj banding na wan versatile choice fɔ rezidenshɛl ɛn kɔmɛshɔnal fɔnicha. I de insay bɔku bɔku sɔlid kɔlɔ dɛn, wud grens, mat finish, glos lɛvɛl ɛn tik. I fleksibiliti ɛn mashinability mek am fayn fɔ standad stret edj, sɛlɛkɛt kɔv kɔmpɔnɛnt ɛn ay-volyum kabinɛt prodakshɔn.
Baya dɛn kin pik PVC we dɛn nid prɛktikal mɔstɔ rɛsistɛns, bɔku bɔku dɛkɔretiv opshɔn dɛn ɛn kɔmpitishɔn faktri prayz. Di fainal bond ɛn mɔstɔ sil stil dipen pan kɔrɛkt prayma, adeziv, prɛshɔn, tɛmpracha, fid spid ɛn bod pripiamɛnt.
ABS edj bandin de gi gud impak pefɔmɛns, klin mashin ɛn dimɛnshɔnal stebiliti fɔ fɔnicha frɔnt, bɔdi, dɛsk, woktɔp ɛn intɛriɔ kɔmpɔnɛnt dɛn. ABS na klorin-fri ɛn dɛn kin spɛsifa am bɔku tɛm we di prɔjek ɔ di target makit favɔret dis matirial prɔfayl.
ABS kin prodyuz insay maching mat, glos, sɔlid-kɔlɔ, wud-greyn ɛn tɛkstɔr dizayn. I fɔ evalyu pan di aktual sabstret ɛn edj banding layn bifo mas prodakshɔn, mɔ we di apinɛns, trim kwaliti ɔ dimand savis kɔndishɔn impɔtant.
Akrilik edj bandin, we dɛn kin kɔl bak PMMA edj bandin, dɛn mek am fɔ prɛmiɔm fɔnicha we nid fɔ mek i tan lɛk glas we gɛt ay-glos ɔ fɔ gɛt dɛkɔretiv dip ifɛkt. Dɛn de yuz am bɔku bɔku wan wit akrilik-fes bod ɛn mɔdan kabinɛt frɔnt na kichin, wodrɔb, batrum, rital fiks ɛn ɔfis intɛriɔ.
Anti-skrat kotin ɛn protɛktiv sɔfays tritmɛnt dɛn kin spɛsifa fɔ akrilik edj. Aktual abrashɔn, UV ɛn kemikal pefɔmɛns dipen pan di kɔnstrɔkshɔn we dɛn pik ɛn dɛn fɔ kɔnfyus am tru sampul, tɛknikal rikwaymɛnt ɛn aplikeshɔn tɛst.
Akrilik ɛn PVC edj bandin insay kɔstɔm kɔlɔ, finish ɛn dimɛnshɔn
PVC , ABS ɛn akrilik na nɔ-porous tɛmplastik matirial dɛn we nɔ de absɔb wata lɛk panɛl kɔr we dɛn mek wit wud we dɛn dɔn ɛksplɔz. We dɛn prosɛs di kɔrɛkt ed, prayma ɛn adeziv sistɛm fayn fayn wan, di ed we dɔn dɔn de ɛp fɔ ridyus di mɔstɔ we de rich MDF, patikyulabɔd ɔ plai wud.
'Waterproof edge banding' de diskraib di edj matirial we nɔ de mek wata ɛn di tin we i want fɔ protɛkt; i nɔ min se ɛvri fɔnicha jɔyn we dɔn dɔn, nɔ kin mek wata pas fɔ insɛf. Bond-layn kɔntinyuiti, kɔna finish, adhesive sɛlɛkshɔn, mashin paramita ɛn instɔleshɔn kwaliti de ditɛm di fayn resistans to wata ɛn wata vapour.
Anti-skratch surface opshɔn dɛn de ɛp fɔnicha edj fɔ kip dɛn apinans we dɛn de mek, asembli, transpɔt ɛn nɔmal yus. Dɛn kin gi ay-glos akrilik wit wan kɔtin we de protɛkt, we mat ɛn tɛkstɔr PVC ɔ ABS sɔfays kin mek smɔl smɔl skɔf ɛn hanlin mak dɛn nɔ de si bɛtɛ.
Selekt di pefɔmɛns we yu nid akɔdin to di ɛnd yus. Kichin frɔnt, rital kɔnta, ɔfis dɛsk, skul fɔnicha ɛn kɔmɛshɔnal fiks kin nid difrɛn ed tik, sɔfa tritmɛnt ɔ tɛst standad pas lɔw-kɔntakt dɛkɔretiv panɛl.
Di edj band kin de na ɔt we dɛn de prosɛs ɛn to klin dɛn we dɛn de du savis. Di fayn we aw i fayn de dipen pan di matirial, di kɔlɔ, di kɔtin, di adhesive ɛn di kɔndishɔn we dɛn de ɛksplɔz. Gi di envayrɔmɛnt we dɛn want ɛn ɛni klin ɛjɛn ɔ tɛst we dɛn nid so dat Wallis go ebul fɔ evalyu di spɛsifikɛshɔn ɛn arenj fɔ tɛst di sampul.
Moisture-resistant, anti-skratch ɛn dɛkɔretiv edj protɛkshɔn
Moisture-resistant edge banding na in dɛn kin yuz pan kabinɛt domɔt, drɔwa frɔnt, bɔdi, shelf, wodrɔb panɛl ɛn batrum fɔnicha. Akrilik edj de sɔpɔt prɛmiɔm ay-glɔs dizayn, we PVC ɛn ABS de gi brayt opshɔn fɔ mat, sɔlid-kɔlɔ ɛn wud-grɛyn kɔllɛkshɔn.
Di aplikeshɔn dɛn na dɛsk, tebul, stɔrɔj yunit, bukkɛs, TV kabinɛt, patishɔn, wok steshɔn ɛn shelf. Di kɔrɛkt ed tik ɛn matirial de ɛp fɔ protɛkt ay-kɔntakt eria ɛn kɔdinɛt di edj we pɔsin kin si wit di dɛkɔretiv panɛl sɔfays.
Bɔku tɛm, kɔmɛshɔnal fiks dɛn nid ed dɛn we go de te, kɔnsistɛns kɔlɔ ɛn saplai we dɛn kin ripit. Wallis kin sɔpɔt displei kɔnta, shɔp fitin, ɔtel fɔnicha, rɛstɔrant intɛriɔ, lɛbɔretri kabinɛt, wɛlbɔdi kes wok ɛn skul fɔnicha wit prɔjek-spɛsifi k matirial ɛn dimɛnshɔn.
Edj banding aplikeshɔn fɔ rɛzidɛshɔnal ɛn kɔmɛshɔnal fɔnicha
Wan profeshɔnal fɔnicha edj fɔ kɔdinɛt wit di bod insay mɔ pas kɔlɔ. Wallis kin evalyu di dɛkɔretiv print, wud-greyn dairekshɔn, tɛkstɔr dip, mat ɔ glos lɛvɛl ɛn ed tik fɔ mek wan mɔ kɔnsistɛns bɔd-to-ɛj apinans.
Send wan ɔrijinal panɛl ɔ laminat sampul ɛnitɛm we ɛksaktɔl maching impɔtant. Dijital imej, monita kɔlɔ ɛn print kɔlɔ kad nɔ kin riprodyuz di las bod sɔfays kɔrɛkt wan, mɔ fɔ mɛtal, pal, transparent, ay-glos ɛn dip tɛkstɔr dizayn dɛn.
Dimɛnshɔn dɛn kin divɛlɔp rawnd panɛl tiknɛs, edj rɛdyus, trim alawɛns, prodakshɔn spid ɛn rol-hanlin rikwaymɛnt dɛn. Gi di target wit, tik, rol lɔng ɛn ɛni ia ɔ prɔjek kwantiti so dat dɛn go ebul fɔ rivyu di prodakshɔn ɛn pak plan kɔrɛkt wan.
OEM savis kin inklud kɔstɔm dizayn, kɔlɔ rɛfrɛns, rol lɛbl, katɔn mak ɛn ɛkspɔt pak. Ɔl di artwok, spɛsifikɛshɔn ɛn pak ditil dɛn fɔ gɛt aprɔval bifo mas prodakshɔn.
Prɔsɛsin pefɔmɛns dipen pan di kɔmplit edj bandin sistɛm pas di edj strip nɔmɔ. Impɔtant vayriɔbul dɛn inklud di bod sɔfa ɛn mɔstɔ kɔntinyu, edj matirial, prayma, adeziv, glu tɛmpracha, fid spid, prɛshɔn rɔla, trimin tul, baf yunit ɛn ambiɛnt kɔndishɔn.
Provayd di edj bander brand ɛn mɔdel, nɔmal fid spid ɛn adhesive tayp.
Kɔnfɛm if di prɔjek de yuz EVA, PUR ɔ ɔda apruv adhesive sistem.
Test adheshon, trimming, buffing, kona rounding en visual joint kwaliti pan di aktual panɛl.
Apruv di sampul ɛn prɔsesin rizɔlt bifo bɔku bɔku prodakshɔn.
Standart prodakt kin pripia fɔ ɔtomatik, sɛmi-ɔtomɛtik ɛn sɛlɛkɛt manual aplikeshɔn dɛn. Ziro-jɔyn, hot-ɛya ɔ lɛsa prɔsesin nid fɔ gɛt kɔmpitabl fɛnshɔnal layt ɛn dɛn fɔ aks fɔ am sɛpret pas fɔ tek am fɔ wan standad praymɛnt edj.
Wallis de gi PVC , ABS ɛn akrilik edj bandin so di wan dɛn we de bay kin kɔmpia di kɔst, apia, prɔsesin ɛn ɛnd-yuz rikwaymɛnt dɛn insay wan sɔs projɛkt. Dis kin yus mɔ fɔ fɔnicha kɔllɛkshɔn dɛn we kin jɔyn mat kakas ed, ay-glos frɔnt ɛn difrɛn tiknes.
Sampul dɛn de alaw di tim dɛn we de bay ɛn prodakshɔn fɔ chɛk di kɔlɔ, tɛkstɔr, glos, tik, fleksibiliti, adheshon ɛn mashin bifo dɛn kɔmit to bɔku ɔda. Kastom sampul arenjmɛnt dɛn dipen pan di matirial, dizayn kɔmplisiti ɛn di dimɛnshɔn dɛn we dɛn aks fɔ.
Wallis de sɔpɔt spesifikeshɔn rivyu, sampul aprɔval, prodakshɔn kɔdineshɔn, inspekshɔn, kɔstɔm lɛbl, katon pak ɛn intanashɔnal shiping dɔkyumɛnt fɔ fɔnicha faktri, distribyushɔn ɛn prɔjek kɔstɔma dɛn.
Kastom matirial, dimɛnshɔn, dɛkɔretiv maching ɛn faktri saplai sɔpɔt
Ripit fɔnicha prodakshɔn nid fɔ gɛt aprɔv spesifikeshɔn ɛn masta sampul. Dipen pan di ɔda, inspekshɔn kin kɔba matirial aydentifikeshɔn, kɔlɔ ɛn glos kɔnsistɛns, print dɛkɔ, sɔfays dɛfɛkt, wit, tik, rol kɔndishɔn, prayma, lɛbl, pak ɛn ɔda traysibiliti.
Pri-prɔdakshɔn kɔnfɔmeshɔn: matirial, dimɛnshɔn, sɔfa, kɔlɔ rɛfrɛns ɛn pak.
In-prɔses chɛk: apinans, dimɛnshɔnal kɔnsistɛns ɛn rol kwaliti.
Faynal inspekshɔn: kɔmpia wit di aprɔv sampul ɛn ɔda spɛsifikɛshɔn.
Ekspɔt pak: protɛkt rol, lɛbl, katon, palet ɛn shiping mak as dɛn gri.
Wallis sɛtifiket ɛn kwaliti dɔkyumentri
Gi di matirial we yu lɛk, bod ɔ kɔlɔ sampul, wit, tik, rol lɔng, finish, kwantiti we yu nid, edj band mashin, adeziv sistem, pak riŋwe ɛn di kɔntri usay yu de go.
Wallis go rivyu di kɔnstrɔkshɔn we dɛn aks fɔ, di maching rikwaymɛnt ɛn prodakshɔn kwantiti, dɔn kɔnfɔm sampul arenjmɛnt, kot besis ɛn kɔstɔmayshɔn we de.
Test di sampul pan di aktual bod, adhesive ɛn edj banding layn. Kɔnfɛm kɔlɔ, tɛkstɔr, glos, adheshon, trim, baf ɛn kɔna kwaliti bifo yu apruv mas prodakshɔn.
Afta dɛn dɔn gri fɔ di spɛsifikɛshɔn ɛn di sampul, kɔnfɔm di ɔda kwantiti, di lɛbl dɛn, di katon dɛn, di tin dɛn we dɛn nid fɔ du fɔ di palet ɛn di ditel dɛn bɔt di shiping. Prodakshɔn de fala di ɔda dɔkyumɛnt dɛn we dɛn gri fɔ ɛn di rɛfrɛns we dɛn dɔn gri fɔ.
Send Yu Edge Banding Rikwaymɛnt dɛn
Wallis de wok wit fɔnicha faktri, kabinɛt manifakta, panɛl prɔsesɔ, ɔlsay ɛn prɔjɛkt bayer na intanashɔnal makit. Klia spɛsifikɛshɔn, fizik sɛmpul ɛn prodakshɔn-layn tɛst de ɛp fɔ ridyus di kɔlɔ mismatch, prɔsesin prɔblɛm ɛn ripit-ɔda risk.
Prodakshɔn kɔdineshɔn ɛn intanashɔnal kɔstɔma sɔpɔt
Kastom edj banding projɛkt dɛn kin involv sɔm rawnd dɛn fɔ kɔlɔ, finish ɛn mashin tɛst. Wallis de pe atɛnshɔn pan rispɔnsiv kɔmyunikeshɔn, aprɔv sampul kɔntrol ɛn stebul ripit saplai fɔ sɔpɔt lɔng tɛm bay bay program dɛn.
PVC , ABS ɛn akrilik ɔl kin yuz fɔ kichin kabinɛt. Bɔku tɛm dɛn kin pik akrilik fɔ ay-glos frɔnt, ABS fɔ durable klorin-fri edj ɛn PVC fɔ versatile, kɔst-efyushɔn prodakshɔn. Di bɛst chus dipen pan di bod, dizayn, badjɛt, mashin ɛn di mɔstɔ pefɔmɛns we dɛn nid.
Di tɛmplastik edj matirial nɔ de mek wata ɛn i de ɛp fɔ protɛkt di bod kɔr. Kɔmplit jɔyn pefɔmɛns dipen pan kɔntinyu adhesive kɔvarej, kɔrɛkt mashin sɛtin, kɔna finish ɛn di savis ɛnvayrɔmɛnt. Dɛn fɔ tɛst wan sampul we i rili impɔtant fɔ mek wata nɔ go insay.
Dɛn kin gi akrilik edj wit anti-skrach sɔfays tritmɛnt, bɔt di rɛsistɛns kin difrɛn bay di kɔtin, glos lɛvɛl, kɔlɔ ɛn tɛst we. Gi di pefɔmɛns ɔ ɛnd yus we dɛn nid so dat dɛn go ebul fɔ evaluate di kɔrɛkt sampul.
Yɛs. Matching kin inklud kɔlɔ, dɛkɔretiv print, tɛkstɔr ɛn glos lɛvɛl. I fayn fɔ yuz ɔrijinal bod ɔ laminat sɛmpul bikɔs skrin imej ɛn kɔlɔ kɔd dɛn nɔ kin ebul fɔ riprodyuz ɔl di say dɛn we de ɔp ɔlsay.
Standart edj banding kin bi saplai fɔ ɔtomɛtik ɛn sɛmi-ɔtomɛtik ikwipmɛnt. Kɔmpatibiliti fɔ kɔnfɔm yuz di aktual bod, adeziv, mashin tɛmpracha, fid spid, prɛshɔn, trim ɛn baf sɛtin.
EVA ɛn PUR sistem dɛn de yuz bɔku bɔku wan fɔ mek fɔnicha edj band, bɔt kɔmpatibiliti dipen pan di prayma, edj matirial, sabstret ɛn ikwipmɛnt. Kɔnfɛm di adeziv sistɛm bifo yu ɔda ɛn du prodakshɔn-layn tɛst bifo yu yuz am mas.
Ziro-jɔyn prɔsesin nid fɔ mek edj band wit wan kɔmpitabl fɛnshɔnal layt ɛn fayn ikwipmɛnt. Stet if yu yuz hot air, laser, NIR ɔ ɔda teknɔlɔji so fisibiliti kin rivyu separet frɔm standad primed edj banding.
Yɛs. Wallis de sɔpɔt kɔstɔm matirial, wit, tik, rol lɔng, kɔlɔ, tɛkstɔr, glos, printin, lɛbl ɛn ɛkspɔt pak, we de ɔnda tɛknikal fisibiliti ɛn ɔda kwantiti.
Yɛs. Dɛn kin arenj di sampul dɛn fɔ mek dɛn luk, fɔ mek dɛn mach di bɔd ɛn fɔ mek dɛn tɛst dɛn na mashin. Sampul kɔst ɛn pripiamɛnt dipen pan if di tin we dɛn aks fɔ na standad prɔdak ɔ na kɔstɔm-divɛlɔp dizayn.
Send di matirial, wit, tik, rol lɔng, kɔlɔ ɔ bod sampul, finish, kwantiti, adeziv, mashin tayp, pak we dɛn nid, di kɔntri usay yu want fɔ go ɛn ɛni tɛst ɔ kɔmplians dɔkyumɛnt we dɛn nid.
MOQ dipen pan di matirial, saiz, kɔlɔ, sɔfa kɔnstrɔkshɔn ɛn kɔstɔmayshɔn rikwaymɛnt. Standart tin dɛn ɛn kɔstɔm-divɛlɔp prɔdak dɛn kin gɛt difrɛn minim kwantiti, so sɛn di kɔmplit spɛsifikɛshɔn fɔ kɔnfɔm.
