|
edj bandin we dɛn kin yuz fɔ mek di ed
Wallis bin de tɔk bɔt am
| Kɔlɔ: | |
|---|---|
| Matirial: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis kɔstɔm mɛtal PVC edj banding fɔ fɔnicha panɛl na wan dɛkɔretiv ɛn protɛktiv edj sɔlvishɔn we dɛn dɔn divɛlɔp fɔ kabinɛt domɔt, wodrɔb, drɔwa, tebul, wɔl panɛl, rital fiks, ɔtel fɔnicha, ɔfis fɔnicha, ɛn akitɔk mil wok.
Di fleksibul PVC bays de kɔba di MDF, patikyulabɔd, ɛn plai wud ed dɛn we de na do, we di mɛtal sɔfays de mek brɔsh aluminiɔm, stenlɛs-stiɛl, krom, silva, gold, kɔpa, ros-gold, gɔnmɛtal, blak-nikɛl, mat, glos, ɔ kɔstɔmayz vijual ifɛkt dɛn.
Wid, tik, mɛtal dɛkɔ, sɔfa tɛkstɔr, glos, rol lɔng, baksayd prayma, logo printin, protɛktiv fim, kɔr saiz, lɛbl, ɛn ɛkspɔt pakej kin kɔstɔmayz fɔ fɔnicha faktri, panɛl prɔsesɔ, distribyushɔn, kɔntrakta, ɛn OEM brand.
Rikwest wan Mɛtalik Ɛj Bandin Sampul
| fɔ di Ficha | Ditiɛl |
|---|---|
| Di Prodak Nem | Kastom Metallic PVC Edge Banding fɔ Fɛnichɔ Dekorativ Panɛl dɛn |
| Base Material | PVC bays wit mɛtal dɛkɔretiv sɔfa layt; ɛksaktɔ fɔyl, print, kɔtin, ɔ laminat kɔnstrɔkshɔn we dɛn kɔnfyus di prɔdak |
| Di Finish dɛn we de na di Surface | Brush, glos, mat, miro-layk, tɛkstɔr, smol, ɔ kɔstɔmayt |
| Kɔlɔ dɛn we gɛt Mɛtal | Silva, aluminiɔm, stenlɛs-stiɛl ifɛkt, krom, gold, kɔpa, ros gold, brɔnz, gɔnmɛtal, blak nikɛl, ɛn kɔstɔm kɔlɔ dɛn |
| Tiknɛs Rɛnj | 0,4–2,0 mm, ɛn di ɔda wan dɛn; kɔstɔmayz tiknɛs sɔbjɛkt to dɛkɔ strɔkchɔ ɛn prɔsesin rikwaymɛnt |
| Width Rɛnj we de mek di ples | Frɔm lɛk 12mm to 50mm ɔ pas dat; fainal yuzable width we de ɔnda kɔnfɔmeshɔn |
| Di Lɛngth fɔ Rol | Kastam akɔdin to tik, wit, kɔr saiz, wayndin stebiliti, pak, ɛn ɔda kwantiti |
| Baksayd Tritmɛnt | Prayma ɔ ɔda tritmɛnt we mach wit di EVA, PUR, PO, ɔ di adhesive sistem we dɛn dɔn pik |
| Tipik Prɔsesin | Otomatik edj bandin, kɔntɔ edj bandin, manual aplikeshɔn, trim, skrap, baf, ɛn sɛlɛkɛt kɔv-ɛj prɔsesin afta tray |
| Panɛl dɛn we Kɔmpatibl | MDF, patikyulabɔd, plai wud, laminated panɛl, ɛn ɔda kɔmpatibl fɔnicha bod dɛn |
| Kastom Opshɔn dɛn | Kɔlɔ maching, tɛkstɔr, glos, wit, tik, rol lɔng, kɔba prɔfayl, day-kat kɔmpɔnɛnt dɛn, logo printin, lɛbl, ɛn pak |
| Aplikeshɔn dɛn | Kabinɛt, wodrɔb, tebul, drɔwa, panɛl dɛn na di wɔl, rital displei, ɔfis fɔnicha, ɔtel fɔnicha, ɛn akitɔk mil wok |
Spɛsifikeshɔn not: Di sɔs pej kɔnfɔm wan PVC bays wit mɛtal sɔfa layt, 0.4–2.0mm tik, wit frɔm lɛk 12mm to 50mm ɔ wayda, ɛn kɔstɔm shep ɔ logo printin. Eksakt mɛtal-layer kɔnstrɔkshɔn, adhesive sistem, rol lɔng, bɛnd rayus, sɔfays rɛsistɛns, tolɛreshɔn, ɛn MOQ nid sampul ɛn ɔda kɔnfɔmeshɔn.
Metalik pVC furniture edj banding
Mɛtalik PVC edj banding na wan smɔl tɛmplastik strip we dɛn kin yuz fɔ dɔn di ed dɛn we de na do na panɛl fɔnicha. I de ayd di raw bod kɔr, mek wan klin vijual transishɔn, ɛn ɛp fɔ protɛkt di edj frɔm chip, dɔti, layt impak, ɛn limited mɔstɔ ɛksplɔshɔn.
Di PVC bays de gi fleksibiliti, mashinability, tiknes, edj kɔvarej, ɛn impak sɔpɔt. I fɔmyulashɔn de inflɔws bɛnd bihayvya, trim kwaliti, dimɛnshɔnal stebiliti, ɛn kɔmpitibliti wit stret ɔ kɔv panɛl jɔyometri.
Di fes we pɔsin kin si kin yuz fim we gɛt mɛtal, fɔyl, print, kɔt, ɔ ɔda tin we dɛn mek fɔ dekɔret. Di wan dɛn we de bay fɔ kɔnfɔm if di prɔdak we dɛn pik gɛt rial mɛtal fɔyl ɔ na jɔs print mɛtal ifɛkt bikɔs di we aw i luk, di we aw i bɛnd, di we aw i de skrach, ɛn di kɔst kin difrɛn.
Wan fayn baksayd prayma kin impruv bonding bitwin di PVC strip ɛn hot-mɛlt adeziv. Prayma kemistri fɔ kɔmpitabl wit di adeziv we dɛn dɔn pik, edjbander tɛmpracha, fid spid, panɛl matirial, ɛn savis kɔndishɔn.
We yu kɔmpia am wit bɔku sɔlid aluminiɔm ɔ stenlɛs-stiɛl trim dɛn, polima-based mɛtal edj band kin layt ɛn izi fɔ kɔt, trim, skrap, baf, ɛn aplay pan kɔmɔn ikwipmɛnt. I nɔ strɔkchɔral idɛntik to rial mɛtal, so impak, ɔt, skrach, kɔrɛshɔn, ɛn bɛnd pefɔmɛns fɔ kɔmpia yuz fizik sɛmpul.
Metal-Effekt PVC Edge Banding we yu go yuz
Metal edging kin mek wan freym, kɔntrast layn, ɔ kɔdinɛt transishɔn rawnd wan fɔnicha panɛl bay wilful. I kin mach mɛtal hadwɔd, aplayans finish, aluminiɔm freym, glas, akrilik, ston, panɛl dɛn we gɛt ay glos, ɛn mat dɛkɔretiv sɔfays.
Edj bandin de ayd di visible kor fɔ MDF, patikyulabɔd, plai wud, ɛn laminated bod dɛn. If yu put di edj fayn fayn wan, i de mek i luk fayn ɛn i nɔ de mek di raw edj nɔ gɛt dɔti dairekt wan, aw i de ol am, ɛn i nɔ de mek i nɔ gɛt wata we i nɔ de.
Di PVC strip kin absɔb ɔ sheb layt edj impak ɛn ridyus visible chipping we yu de yuz nɔmal indo. Protɛkshɔn dipen pan tik, PVC fɔmyulashɔn, bond kwaliti, panɛl kɔr, edj rɛdyus, fɔnicha dizayn, ɛn impak siriɔs.
Dɛn kin prosɛs di rayt gred dɛn bay we dɛn yuz standad stret-layn ɔ kɔntɔ ed-banding ikwipmɛnt wit wan aprɔv adeziv ɛn mashin sɛtup. Aplikeshɔn, ɛnd trim, ɔp-ɛn-bɔt trim, kɔna rawndin, skrap, ɛn baf fɔ bi ɔptimayz fɔ di mɛtal fes.
Polima-based ed strip dɛn jɔs de ad smɔl wet pas tik sɔlid-mɛtal profayl dɛn ɛn dɛn nɔ nid di sem we fɔ kɔt, drɔ, fɔ fast, ɔ fɔ kɔntrol kɔrɛshɔn. Faynal ikɔmiks dipen pan dɛkɔ kɔnstrɔkshɔn, ɔda volyum, instɔleshɔn, rijɛkt rɛt, ɛn pefɔmɛns target.
Dekorativ Apiyans ɛn Ɛj Protɛkshɔn
Brush linear textures de sɔpɔt kichin, ɔfis, rital fiks, aplayans, ɛn kɔntempɔral fɔnicha. Dairekshɔn finish fɔ aplay kɔnsistɛntli rawnd adjasent panɛl fɔ mek yu nɔ si difrɛn ɔryenteshɔn.
High-reflective krom effects kin mek wan strɔng dɛkɔretiv aylayt. Dɛn kin sho fayn fayn skrach, finga prɛnt, trim mak, adhesive kɔntaminɛshɔn, ɛn surface distortion izi wan pas brush ɔ mat finish.
Wam mɛtal kɔlɔ dɛn fayn fɔ ɔspitul fɔnicha, lɔjishɔn wodrɔb, displei kabinɛt, kɔsmɛtik kɔnta, dɛkɔretiv wɔl panɛl, ɛn branded intɛriɔ. Dɛn fɔ chɛk di fizik sɛmpul dɛn ɔnda di rial layt we di prɔjek gɛt.
Dak mɛtal edj kin kɔdinɛt wit blak hadwae, smok glas, dak wud, ston, mat panɛl, ɛn industrial fɔnicha. Dɔst, skrat, ɛn difrɛn kɔlɔ kin de mɔ na fes dɛn we dak ɛn we gɛt ay glos.
Surface gloss ɛn texture de afɛkt di we aw i luk, klin, finga prɛnt we pɔsin kin si, skrach we pɔsin kin si, trim, ɛn buf. Apruv di kɔmplit edj sampul pas fɔ pik ɔl frɔm dijital kɔlɔ imej.
Kɔlɔ ɛn dɛkɔ maching kin divɛlɔp agens fɔnicha bod, mɛtal hadwɔd, laminat, akrilik shit, PETG film, PVC film, ɔ fizik trim rɛfrɛns. Difayn di kɔlɔ tolɛreshɔn, glos, tɛkstɔr, dairekshɔn, ɛn di kɔndishɔn fɔ si bifo yu gri.
| Selection Factor | Tipik Kɔnsidɛreshɔn | Wetin fɔ Kɔnfɔm |
|---|---|---|
| Wayd | Nɔmal wan dɛn kin pik am we wayd smɔl pas di panɛl ed fɔ alaw fɔ trim | Panɛl tik, adhesive layn, mashin tolɛreshɔn, trim alawɛns, ɛn fayn yuzabl wit |
| 0,4–0,6mm na di wan | Tin dɛkɔretiv edj fɔ sɔm sɛlɛkɛt lɔw-impakt ɔ kɔba aplikeshɔn dɛn | Kor telegraf, bɛnd rayus, opasiti, adhesive sho-thru, ɛn ɛnd-yuz impak |
| 0,8–1,0mm na di wan | Jɛnɛral fɔnicha edj we nid balans fɔ fleksibiliti ɛn kɔvarej | Mashin sɛtup, trim, kɔna rawndin, mɛtal-fes stebiliti, ɛn panɛl dizayn |
| 1,3–1,5mm na di wan | Mɔ sɔbstanshal edj apinans ɛn impɔtant impak sɔpɔt fɔ sɛlɛkɛt panɛl dɛn | Minimum bɛnd rayus, mil tul, kɔna finish, adhesive amount, ɛn dɛkɔ krak risk |
| 2.0mm na wan | Tik protɛktiv edj fɔ ay-yuz fɔnicha ɛn pronɔns edj ditaylin | Mashin kapasiti, tul jɔyometri, kɔna rayus, kɔntɔ fisibiliti, kol, ɛn sɔfayz delaminɛshɔn risk |
| Wida Dekorativ Strip dɛn | Kɔnfrɛns tebul dɛn, woktɔp dɛn, displei fɔnicha dɛn, panɛl dɛn we gɛt bɔku layt dɛn, ɛn bold mɛtal autlayn dɛn | Flatness, winding, roll core, handling, adhesive coverage, trim, ɛn pak |
Dɛn tin ya na tin dɛn we pɔsin fɔ tink bɔt fɔ pik pɔsin pas fɔ bi lɔ dɛn we gɛt garanti fɔ yuz di aplikeshɔn. Faynal wit ɛn tiknɛs fɔ kɔnfɔm tru wan mashin trayal we yu de yuz di aktual panɛl, adeziv, tul dɛn, spid, ɛn edj jɔyometri.
EVA na wan we dɛn kin yuz bɔku bɔku wan fɔ kɔvɛnshɔnal fɔnicha edj band. Aplikeshɔn kwaliti dipen pan adhesive gred, mɛlt tɛmpracha, ambiɛnt tɛmpracha, panɛl tɛmpracha, fid spid, prɛshɔn rɔla, glu kwantiti, ɛn opin tɛm.
Dɛn kin pik PUR we di fɔnicha we dɛn dɔn dɔn nid fɔ mek i ebul fɔ tinap tranga wan fɔ mek i nɔ wam, fɔ mek di ples wam, fɔ mek i nɔ gɛt wata, ɔ fɔ gɛt kemikal dɛn. Di kɔmplit prɔses fɔ fala wetin di adhesive spɔlayt nid fɔ ikwipmɛnt, mɔstɔ riakshɔn, klin, stɔrɔj, ɛn fɔ mɛn.
PO, dispersion, manual-contact, ɔ ɔda sistɛm dɛn kin pɔsibul fɔ spɛshal aplikeshɔn dɛn. Dɛn fɔ tɛst di kɔmpatibiliti wit di PVC fɔmyulashɔn, baksayd prayma, mɛtal sɔfays, panɛl, ikwipmɛnt, ɛn savis kɔndishɔn.
Laser, hot-eya, NIR, ɔ ɔda ziro-jɔyn prɔses dɛn nid fɔ gɛt edj band wit wan spɛshal ɛnjinɛri fɛnshɔnal layt. Standart primed PVC edj banding nɔ fɔ tek am se i kɔmpitabl wit ziro-jɔyn ikwipmɛnt pas nɔmɔ dɛn dɔn divɛlɔp ɛn apruv di ɛksaktɔl prodak kɔnstrɔkshɔn fɔ da prɔses de.
Chek rol alaynɛshɔn, prɛhit, adeziv tɛmpracha, glu spred, prɛshɔn, fid spid, ɛnd trim, ɔp-ɛn-bɔt trim, kɔna rawndin, skrap, baf, ɛn ɛkstrakshɔn. Mɛtal sɔfays kin nid fɔ gɛt kɔntakt we jisnɔ ɛn klin tul dɛn pas standad sɔlid-kɔlɔ PVC.
Rɔn wan ripɔt trayal yuz di aktual edj band, panɛl, adeziv, mashin, tul dɛn, tɛmpracha, spid, prɛshɔn, rayus, ɛn klin prɔses. Inspek adheshon, joyn apinans, metallik-fes damej, trim, wayt, krak, delamination, en kona kwaliti.
Stret-layn aplikeshɔn fayn fɔ kabinɛt, shelf, drɔwa, wodrɔb, dɛsk, tebul, patishɔn, ɛn standad rɛktangul kɔmpɔnɛnt dɛn. Panɛl skwea, edj kwaliti, adhesive layn, ɛn trim alaynɛshɔn de afɛkt di fayn rizɔlt.
Tin ɛn fleksibul gred dɛn kin fayn fɔ kɔba woktɔp, risepshɔn dɛsk, rital fiks, sɛkɔral tebul, ɛn fɔnicha we gɛt shep. Minimum insay ɛn ɔdasay rayus dipen pan tik, PVC fɔmyulashɔn, mɛtal-layer kɔnstrɔkshɔn, tɛmpracha, fid we, ɛn profayl jɔyometri.
CNC ɔ kɔntɔ edjband dɛn kin prosɛs shep panɛl dɛn we di strip, adeziv, rayus, spid, prɛshɔn, ɛn kɔt pat kɔmpitabl. Dɛn fɔ chɛk di mɛtal say fɔ si if i gɛt wrinkling, wayt, krak, print distɔrshɔn, ɔ separeshɔn.
Smɔl batch, ripa, protɔtayp, ɛn shep pies kin yuz manual methods. Mek di adhesive kɔvarej ɛn prɛshɔn yunifom, ɛn tɛst di trim ɛn klin tul dɛn fɔ mek yu nɔ mak di mɛtal fes.
Dimɛnshɔn kin divɛlɔp fɔ standad panɛl tiknes, woktɔp, mɔlti-layer bod, tik tebul, dɛkɔretiv freym, smɔl trim, ɔ spɛshal profayl. Spɛsifik di nominal ɛn yuzabl dimɛnshɔn, tolɛreshɔn, ɛn trim alawɛns.
Kɔlɔ, brɔsh dairekshɔn, tɛkstɔr, glos, pɔtn, ɛn mɛtal intɛnsity kin mach to wan fizik rɛfrɛns. Sampling nid fɔ bi bikɔs skrin dɛn nɔ kin ebul fɔ riprodyuz riflekshɔn, mɛtal ɔryenteshɔn, tɛkstɔr, ɛn glos kɔrɛkt wan.
Logo printin, ripit brand mak, kala kod, ɔ prodakt aydentifikeshɔn kin pɔsibul fɔ OEM ɔda. Kɔnfɛm print pozishɔn, ripit lɔng, abrashɔn rɛsistɛns, artwok ɔnaship, minim kwantiti, ɛn trim visibiliti.
Dɛn kin tɔk bɔt day-kat pis, shep strip, dɛkɔretiv inlay, ɛn kɔba profayl akɔdin to drɔin, dimɛnshɔn, tolɛreshɔn, bɛnd rikwaymɛnt, atakmɛnt we, ɛn prodakshɔn kwantiti.
Kor dayamita, rol lɔng, wayndin dairekshɔn, jɔyn alawɛns, rol lɛbl, katon, sɛparatɔ, palet we, mɔstɔ protɛkshɔn, ɛn shiping mak dɛn kin kɔdinɛt wit westɛm ɛn mashin rikwaymɛnt dɛn.
Kastom Kɔlɔ, Finish, ɛn Dimɛnshɔn
Mɛtal edj kin kɔdinɛt wit aplayans, handel, aluminiɔm profayl, tap, layt, ɛn ay-glos ɔ mat kabinɛt frɔnt. Kichin aplikeshɔn fɔ kɔnfɔm ɔt, humidity, klin, ɔyl, stɛyn, jɔyn, ɛn ed-siling pefɔmɛns.
Gold, ros-gold, gɔnmɛtal, blak-nikɛl, aluminiɔm, ɔ krom ifɛkt dɛn kin mek yu frem di wodrɔb domɔt dɛn, drɔwa dɛn, shelf dɛn, dresin tebul dɛn, ɛn kloz sistem dɛn. Yuz kɔnsistɛns dɛkɔ dairekshɔn ɛn batch sɛlɛkshɔn fɔ adjasent kɔmpɔnɛnt dɛn.
Wida ɔ tik mɛtal edj kin mek wan pronɔns perimita pan dɛsk, mitin tebul, risepshɔn kɔnta, ɛn ɛgzibit fɔnicha. Dɛn fɔ evaluate di ed dɛn we gɛt ay kɔntakt fɔ si if dɛn impak, abrashɔn, klin, ɛn di jɔyn dɛn we go de fɔ lɔng tɛm.
Mɛtal ifɛkt dɛn kin fayn fɔ kɔsmɛtik kɔnta, jɔyri displei, fashɔn fiks, ilɛktronik displei, ɔtel kesgud, rɛstɔrant fɔnicha, ba, ɛn risɛpshɔn eria. Spɛsifik klin ɛn disinfɛktan rɛsistɛns fɔ kɔmɛshɔnal mentenɛns.
Mɛtal ed strip dɛn kin difayn TV bakgrɔn, ficha panɛl, ɛnjɔymɛnt yunit, patishɔn, edbɔd, ɛn dɛkɔretiv wɔl sistem. Dɛn fɔ tink bɔt di tin dɛn we dɛn nid fɔ du fɔ mek faya, di we aw dɛn jɔyn fɔ mek di faya, di we aw dɛn fɔ fiks, ɛn di lɔ dɛn we de fɔ di bildin we gɛt fɔ du wit di prɔjek.
Yu kin yuz kɔstɔm wid ɛn finish pan intɛriɔ jɔyn, shelf, risepshɔn ficha, displei plinth, kɔlɔm, freym, ɛn dɛkɔretiv bilt-in, we go fala di sabstret, atɛshɔn, faya, ɛn savis rikwaymɛnt.
Fɛnichɔ ɛn Intɛriɔ Aplikeshɔn dɛn
| Selekshɔn Fakta | Mɛtalik PVC Ɛj Bandin | Mɛtalik ABS Ɛj Bandin | Akrilik/PMMA Ɛj Bandin | Sɔlid Mɛtal Trim | Wud Viniɛr Ɛj Bandin |
|---|---|---|---|---|---|
| Aw a luk | Brayt mɛtal-ɛfɛkt kɔlɔ, tɛkstɔr, ɛn glos lɛvɛl pan wan fleksibul PVC bays | Metalik ifekt pan klorin-fri ABS-based thermoplastic gred | Ay dip, glos, transparent, 3D, ɔ mɛtal vijual ifɛkt dɛn dipen pan kɔnstrɔkshɔn | Ɔtɛnɛtik aluminiɔm, stɛl, bras, ɔ ɔda mɛtal apia ɛn fil | Natural wud gren, difrɛns, tɛkstɔr, ɛn wam |
| Di we aw dɛn de du di wok | Kɔmɔn ed-band mashin dɛn, trim, skrap, baf, ɛn kɔntɔ prɔsesin akɔdin to gred | Di sem kayn tɛmplastik prɔsesin wit gred-spɛsifi k tɛmpracha ɛn tul dɛn | I nid fɔ tek tɛm protɛkt di say we yu de ɛn fɔ trim ɔ polish di gred-spɛsifi k | I kin nid fɔ kɔt mɛtal, fɔm, drɔ, fast, pul di bɔr, ɔ spɛshal adeziv | Hot-melt ɔ ɔda bonin, trim, sand, stɛyn, ɛn lak as nid de |
| Edj dɛn we Kɔba | I pɔsibul wit fayn tik, fɔmyulashɔn, mɛtal layt, rayus, ɔt, ɛn ikwipmɛnt | I pɔsibul akɔdin to gred, tik, rayus, ɛn ikwipmɛnt | dipכnt strכng pan PMMA strכkchכ, tiknes, εn minim bεnd rεdyus | Dipen pan alɔy, prɔfayl, tik, fɔm we, ɛn rayus | I pɔsibul wit tin vinɛs ɛn fayn bak ɔ finga-jɔyn strɔkchɔ dɛn |
| Ki Risk we yu go gɛt | Metal-fes skrach, fɔyl separeshɔn, wayt, po adhesion, ɔ dɛkɔ distɔrshɔn | Surface damej, prɔsesin tɛmpracha mismatch, ɔ po adhesion | Skrach, krak, chip, optik damej, ɔ di kɔna we at fɔ dɔn | Weyt, kɔrɛshɔn, shap edj, kɔmpleks fabrikeshɔn, fastɛns, ɛn ay prɔsesin kɔst | Natural vεryushכn, krak krak, mכsichכ muvmεnt, sand, εn kכt mεntenans |
| Di bɛst we fɔ fit am | Fɔnicha we nɔ de tek bɔku mɔni we nid fɔ mek i tan lɛk mɛtal ɛn fɔ mek i gɛt standad tɛmplastik prɔsesin | Projek dɛn we de spɛsifa ABS prɔpati ɛn mɛtal dɛkɔ | Prɛmiɔm glas-layk, 3D, transparent, ɔ dip-glos fɔnicha ed dɛn | Projek dɛn we nid ɔtɛnɛtik mɛtal kɔnstrɔkshɔn ɔ strɔkchɔral profayl | Natural wud furniture, veneered bod, ɛn wud-based dizayn kɔnsɛpt |
Chek tik, wit, rol lɔng, kɔr dayamita, wayndin dairekshɔn, tɛliskɔp, ed alaynɛshɔn, jɔyn, rol tɛnsiɔn, difɔmeshɔn, ɛn pak. Yuz di we dɛn we dɛn gri fɔ tek sampul ɛn tolɛreshɔn.
Inspek di kɔlɔ, glos, tɛkstɔr, brɔsh dairekshɔn, print rɛjista, mɛtal yunifɔmiti, skrach, wrinkles, patikyula, bɔbul, delamination, pinhol, strik, ɛn sɔfays kɔntaminɛshɔn ɔnda layt we dɛn gri.
Kɔnfɛm baksayd-prayma kɔntinyuiti ɛn bond trɛnk yuz di adhesive ɛn panɛl we yu want. Evaluate initial adhesion, cooled adhesion, heat ageing, humidity exposure, wata exposure, kemikal, ɛn ed lifting akɔdin to di aplikeshɔn.
Difayn di pensil-hadnɛs we dɛn nid, Erichsen, Martindale, stɛl-wul, rɔb, ɔ di kɔstɔma-spɛsifi k tɛst. Dɛn we ya nɔ kin chenj dairekt wan, ɛn di mɛtal sɔfays rizɔlt kin difrɛn frɔm di PVC bays.
Apɔynt wan kɔmpɔnɛnt we dɔn dɔn we dɛn mek wit di rial panɛl, adeziv, mashin, tul dɛn, kɔna rayus, ɛn we fɔ klin. Inspek di joyn visibiliti, kala mach, trim layn, kɔna, buf, adheshon, impak, ɛn surface apinans.
Yuz klin, saf maykrofayba klos fɔ dɔst ɛn fɔ klin ɔltɛm.
Yuz klin wata ɔ wan mild nyutral ditajɛn we nid de.
Rimov ɔyl fɔ kuk, kɔsmɛtik, drink, ink, adeziv, ɛn stɛyn wantɛm wantɛm.
Nɔ yuz abrasive pad, paoda, bled, stɛl wul, ɛn shap tul dɛn.
Nɔ yuz strɔng sɔlvɛnt, asid, alkali, ɔ disinfɛktant we dɛn nɔ gri fɔ yuz.
Test klin dɛn pan di ɛksaktɔl mɛtal dɛkɔ bifo yu yuz am ɔltɛm.
Stɔr di rol dɛn insay os na say we klin ɛn dray usay di san nɔ de shayn dairekt wan, ɔt pasmak, wet, dɔst, ɛn tin dɛn we shap. Sɔpɔt di kɔr kɔrɛkt wan ɛn fala di kɔnfyus stɔrɔj tɛmpracha, aklimatayzeshɔn, ɛn shelf-layf rikwaymɛnt dɛn.
Nɔ drɛg rol dɛn, gayd dɛn we tayt pasmak, dɔti rɔla dɛn, rɔf glɔv dɛn, pak dɛn we de abrayd, ɔ prɛshɔn pasmak pan stak. Dɛn kin tink bɔt protɛktiv fim fɔ sɛnsitiv glos ɔ miro-layk sɔfays dɛn we dɛn alaw fɔ prosɛs.
Restricted-substance, REACH, RoHS, hevi-metal, phthalate, emissions, food-contact, faya, ɔ fɔnicha we dɛn nid kin difrɛn bay di makit ɛn aw dɛn kin yuz am. Rikwest dɔkyumɛnt dɛn we mach di ɛksaktɔ PVC fɔmyulashɔn, mɛtal layt, prayma, tiknɛs, ɛn prodakshɔn batch.
Faynal envayrɔmɛnt ɛn efyushɔn pefɔmɛns dipen pan di edj band, adeziv, panɛl, laminat, kɔtin, ɛn di manufakchurin prɔses. Test di komplit komponɛnt we wan kɔstɔma ɔ rigyuleshɔn nid fɔmal klasification.
PVC edj banding kin bi risaykul insay fayn industrial sistem, bɔt prɛktikal rikavari frɔm finish fɔnicha dipen pan separeshɔn, adeziv, mɛtal sɔfays kɔnstrɔkshɔn, kɔntaminɛshɔn, kɔlɛkshɔn, ɛn lokal infrastukchɔ. Avɔyd yunivasal risaykul klem we nɔ gɛt rod we dɛn dɔn chɛk.
B2B fɔnicha saplai: fayn fɔ kabinɛt faktri, fɔnicha manifakta, panɛl prɔsesɔ, distribyushɔn, ɛn prɔjek kɔntrakta.
Mɛtal dɛkɔ kɔstɔmayshɔn: brush aluminiɔm, stenlɛs-stiɛl ifɛkt, krom, gold, kɔpa, gɔnmɛtal, ɛn kɔstɔm finish.
Fleksibul dimɛnshɔn: kɔstɔm tik, wit, rol lɔng, kɔr saiz, ɛn pak akɔdin to prodakshɔn rikwaymɛnt.
OEM sɔpɔt: logo printin, kɔstɔm lɛbl dɛn, kɔlɔ kɔdin, pak, ɛn prɔjek-spɛsifi k dɛkɔretiv strip dɛn.
Sampul ɛn mashin trayal: matirial verifyeshɔn bifo bɔlk prodakshɔn ɛn sɔpɔt fɔ agreed kwaliti-kɔntrol rikwaymɛnt.
Di Prɔdak Dokumɛnt dɛn we De
Wallis de saplae dɛkɔretiv plastic matirial ɛn fɔnicha edj sɔlvishɔn to kabinɛt manifakta, fɔnicha faktri, panɛl prɔsesɔ, intɛriɔ-matirial distribyushɔn, OEM brand, ɛn prɔjek kɔntrakta. Sɔpɔt kin inklud sampul rivyu, spɛsifikɛshɔn divɛlɔpmɛnt, prodakshɔn kɔdineshɔn, inspekshɔn rikwaymɛnt, ɛn ɛkspɔt pak.
Di Kɔmni Ɛvride Ɔpreshɔn
Fɔ gɛt kɔrɛkt kot, gi di bays matirial, mɛtal-layer prɛferɛns, fizik kɔlɔ sɛmpul, finish, brɔsh dairekshɔn, glos, wit, tik, rol lɔng, kɔr dayamita, panɛl matirial, adeziv, ed-banding mashin, fid spid, minim bɛnd rɛdyus, kwantiti, ples fɔ go, pak, ɛn tɛst dɔkyumɛnt dɛn we dɛn nid.
Fɔ kɔstɔm profayl, day-kat strip, ɔ logo printin, gi bak drɔin, artwok, dimɛnshɔn, tolɛreshɔn, print ripit, atɛshmɛnt we, fainal aplikeshɔn, ɛkspɛkt wear, ɛn pak we yu nid.
I kɔba MDF we de na do, patikyulabɔd, plai wud, ɛn ɔda kɔmpatibl panɛl ed dɛn we i de ad brɔsh, krom, gold, silva, gɔnmɛtal, ɔ ɔda mɛtal dɛkɔretiv ifɛkt.
Di sɔs pej de diskraib wan PVC bays wit wan mɛtal sɔfays layt. Di layt we yu kin si kin bi mɛtal-ɛfɛkt fim, print, kɔtin, laminat, ɔ rial mɛtal fɔyl dipen pan di kɔnstrɔkshɔn we yu dɔn pik. Kɔnfɛm di rayt strɔkchɔ bifo yu ɔda.
Di orijinal spɛsifikɛshɔn de list lɛk 0.4–2.0mm. Faynal avaylabl dipen pan di wit, mɛtal dɛkɔ, bɛnd rayus, prɔsesin ikwipmɛnt, sɔfayz kɔnstrɔkshɔn, kwantiti, ɛn aplikeshɔn.
Di sɔs pej de list di wit frɔm lɛk 12mm to 50mm ɔ pas dat. Spɛsifik di panɛl tik, trim alawɛns, mashin tolɛreshɔn, ɛn yuzable wit we yu de aks fɔ kot.
Yɛs. Wi kin tɔk bɔt brush aluminiɔm, stenlɛs-stiɛl ifɛkt, krom, gold, kɔpa, ros gold, brɔnz, gɔnmɛtal, blak nikɛl, mat, glos, smol, tɛkstɔr, ɛn kɔstɔm ifɛkt dɛn.
Dɛn kin yuz fayn gred dɛn pan kɔba edj dɛn, bɔt di minim rayus dipen pan tik, PVC fɔmyulashɔn, mɛtal-layer kɔnstrɔkshɔn, tɛmpracha, adeziv, ikwipmɛnt, ɛn profayl jɔyometri. Wan kɔntɔ trial nid fɔ de.
Dɛn kin prosɛs di rayt gred dɛn pan kɔmɔn ikwipmɛnt we di prayma, adeziv, tɛmpracha, spid, prɛshɔn, trim, skrap, ɛn baf tul dɛn mach kɔrɛkt wan. Test bifo bulk prodakshɔn.
EVA na kɔmɔn tin fɔ kɔmɔn fɔnicha, we dɛn kin pik PUR fɔ mek i gɛt ay ɔt, humidity, wata, ɔ kemikal rɛsistɛns. Di adeziv fɔ mach di baksayd prayma, panɛl, mashin, ɛn savis ɛnvayrɔmɛnt.
Nɔto ɔtomɛtik wan. Laser, hot-air, NIR, ɛn ɔda tin dɛn we tan lɛk dis nid fɔ gɛt spɛshal layt we dɛn mek fɔ wok. Kɔnfɛm wan dediket ziro-jɔyn prodak kɔnstrɔkshɔn bifo yu yuz dɛn prɔses ya.
Nɔ. di rayt edj bandin kin ridyus di mɔstɔ we de kam insay di ed, bɔt kɔmplit panɛl pefɔmɛns dipen pan di jɔyn, adeziv, panɛl kɔr, kɔna, kɔt, sɔfayz laminat, instɔleshɔn, ɛn di tɛm we dɛn de ɛksplɔz.
Skrach pefɔmans dipen pan di mɛtal-layer kɔnstrɔkshɔn ɛn kɔtin. Rikwest di rayt we fɔ tɛst ɛn di rizɔlt, ɛn evalyu di ed we dɔn dɔn afta yu dɔn trim, skrap, buf, ɛn klin.
Di list fɔ print logo na di list as kɔstɔm opshɔn. Gi vektɔ artwok, print saiz, pozishɔn, ripit lɔng, kɔlɔ, abrashɔn rikwaymɛnt, ɛn ɔda kwantiti fɔ fisibiliti kɔnfɔmeshɔn.
Yɛs, wi kin tɔk bɔt kɔstɔm shep dɛn ɛn di komponent dɛn we dɛn kin kɔt day. Gi drɔin, dimɛnshɔn, tolɛreshɔn, bɛnd ɔ atɛshmɛnt rikwaymɛnt, sɔfays finish, kwantiti, ɛn di ditel dɛn fɔ pak.
Yuz klin saf klos wit wata ɔ wan mild nyutral ditajɛn. Nɔ yuz tul dɛn we de abrayd, bled, paoda, ɛn sɔlvɛnt dɛn we dɛn nɔ gri fɔ yuz. Test kɔmɛshɔnal klin dɛn pan di ɛksaktɔl mɛtal sɔfays fɔs.
Yɛs. Rikwest wan vijual sampul fɔ dɛkɔ aprɔval ɛn inɔf trial matirial fɔ evaluate waynd, fidin, adhesive bonding, trim, kɔna rawndin, skrap, buf, kɔva, ɛn finish apinans.
MOQ nɔ de na di sɔs matirial. I dipen pan if di dɛkɔreshɔn na standad ɔ kɔstɔmayt, ɛn bak di wit, tik, rol lɔng, mɛtal kɔnstrɔkshɔn, printin, prayma, kɔr, ɛn pak.
Gi mɛtal dɛkɔ, fizik sampul, finish, wit, tik, rol lɔng, kɔr, panɛl, adeziv, mashin, fid spid, bɛnd rayus, kwantiti, ples fɔ go, pak, ɛn tɛst dɔkyumɛnt dɛn we dɛn nid.
