Kastom akrilik laser dotted lait gayd panel (PMMA LGP)

Kastom Akrilik Laser Dotted Layt Gayd Panel fɔ Edj-Lit LED Layt

Wallis acrylic laser dotted light guide panel , we dɛn kin kɔl bak PMMA layt gayd plet (LGP) , na optik panɛl we dɛn mek fɔ kɔnvɔyt layt frɔm ed-maunt LED dɛn to smol ɛn yunifom sɔfays iluminɛshɔn. Prɛsishɔn lɛsa dɔt patɛn de kɔntrol layt ɛkstrakshɔn akɔdin to di akrilik shit, we de ɛp fɔ ridyus di ɔt ples dɛn we pɔsin kin si, dak eria ɛn braytnɛs we nɔ ivin.

Wallis de saplae laser-prosɛs akrilik LGP panɛl dɛn insay standad saiz dɛn we inklud 1230 × 2450 mm, 1250 × 1850 mm ɛn 1400 × 2200 mm , wit tiknes frɔm 3–12 mm . Kastom dimɛnshɔn, CNC shep, laser dot distribyushɔn ɛn V-kat ɔptik patɛn kin divɛlɔp akɔdin to LED pozishɔn, panɛl jɔyometri ɛn projɛkt drɔin.

Tipik B2B aplikeshɔn dɛn inklud advatayz layt bɔks, mɛnyu bod, rital displei, logo panɛl, shelf dɛn we gɛt layt, ɛgzibishin displei, akitekchral laytin, LED baklayt asɛmbli ɛn kɔstɔmayz optik layt sistem.

Akrilik Laser Dotted Layt Gayd Panel Spesifikasi

Notis: Faynal braytnɛs, yunifom, optik efyushɔn ɛn fayn laser-dɔt distribyushɔn dipen pan di kɔmplit laytin sistɛm, inklud panɛl saiz, tiknɛs, LED tayp, LED pitch, layt-ɛntrɛ edj, riflɛkta, difyuza, haus ɛn edj kwaliti.

Aw Akrilik Layt Gayd Panɛl De Wok?

Wan akrilik layt gayd plet de yuz totɛl intanɛnt riflɛkshɔn fɔ kɛr layt frɔm LED dɛn we dɛn put along wan ɔ mɔ edj dɛn na di PMMA panɛl. If dɛn nɔ gɛt wan strɔkchɔ fɔ pul di layt, bɔku pan dis layt go kɔntinyu fɔ trɔp insay di akrilik.

Maykro-dɔt dɛn we dɛn rayt wit lɛsa de ambɔg di intanɛnt layt pat na say dɛn we dɛn kin kɔntrol. Ɛni dɔt de ridayrɛkt pat pan di layt to di say we di panɛl de. Bay we yu de chenj di dot saiz, spɛshal ɔ density akɔdin to distans frɔm di LED sɔs, di optik dizayn kin kɔmpɛns fɔ layt lɔs ɛn mek mɔ yunifom iluminɛshɔn.

Layt De Enta Tru di Akrilik Ɛj

Dɛn kin put LED dɛn nia wan PMMA ed we dɛn dɔn polish ɔ we dɔn dɔn fayn so dat bɔku layt go ebul fɔ go insay di panɛl. Akkurat alaynɛshɔn bitwin di LED strip ɛn di akrilik edj impɔtant fɔ optik efyushɔn.

Intanɛt Riflɛkshɔn De Distribut di Layt

Wans insay di PMMA plet, layt de travul tru di panɛl bay intanɛnt riflɛkshɔn. Di panɛl tiknes, dimɛnshɔn, edj finish ɛn optik-grɛd matirial kwaliti de inflɔws aw efyushɔn layt kin travul.

Laser Dɔt dɛn kin pul Layt frɔm di say we di wɔl de

Prɛsishɔn lɛsa dɔt dɛn de ridayrɛkt kɔntrol pat dɛn pan layt to di say we gɛt layt. Dɛn kin ajɔst di dɔt dɛnsiti akɔdin to di panɛl so dat eria dɛn we de fa frɔm di LED dɛn kin pul mɔ layt ɛn kɔmpɛns fɔ di intanɛnt intensiti we de dɔŋ.

Laser Dotting ɛn V-Cutting Layt Gayd Tɛknɔlɔji dɛn

LGP we gɛt dɔt wit laser

Laser dotting alaw di optik patɛn fɔ kɔstɔmayz akɔdin to panɛl dimɛnshɔn ɛn LED kɔnfigyushɔn. I fayn mɔ fɔ kɔstɔm layt bɔks ɛn baklayt asɛmbli usay di dɔt distribyushɔn fɔ mach to wan patikyula shep ɔ LED-ɛntrɛ pozishɔn.

V-Cut Layt Gayd Plɛt

V-shaped layn dεm kin yuz as כda layt-ekstrakshכn strכkchכ. Di pitch, dairekshɔn ɛn dip we di layn dɛn gɛt kin afɛkt di we aw di layt de sheb. Selekshɔn bitwin laser dɔt ɛn V-kɔtin dipen pan di optik target, dimɛnshɔn ɛn manufakchurin dizayn.

Ki Advantej fɔ Laser Dotted Akrilik LGP

Yunifɔm Surface Iluminɛshɔn

Customized laser-dot density de ɛp fɔ kɔmpɛns fɔ chenj dɛn na layt intensiti akɔdin to di plet. So panɛl dɛn we dɛn mek fayn kin ridyus di ed dɛn we brayt, di dak sɛnta dɛn ɛn di layt we pɔsin kin si.

Slim Edj-Lit Struktrɔ

Bikɔs LED dɛn de layt di panɛl frɔm di ed dɛn instead fɔ sidɔm dairekt biɛn di wan ol sɔfays, wan LGP kin sɔpɔt bɔku tin layt asɛmbli dɛn pas bɔku kɔmɔn dairekt-baklit strɔkchɔ dɛn.

Kastom Optik Patɛn

Dɛn kin ajɔst di dɔt dayamita, dɛnsiti ɛn distribyushɔn akɔdin to di say we di LED de, eria we gɛt layt ɛn panɛl jɔyometri pas fɔ aplay di sem patɛn to ɛvri prɔjek.

CNC Kastom Shep dɛn

PMMA layt gayd plet dɛn kin bi CNC prɔses akɔdin to drɔin fɔ rɛktangul panɛl, sɛrkɛl, kɔba shep, ol, notch ɛn kɔstɔmayz layt komponent usay prodakshɔn fisibiliti alaw.

Optik-Grɛd PMMA Klari

High-kwaliti PMMA de gi di transparency ɛn optik stebiliti we nid fɔ efyushɔn ed-layt transmishɔn. Material kwaliti, edj finish ɛn surface kondishɔn ɔl afɛkt di fayn layt pefɔmɛns.

I fayn fɔ di Layt Dizayn dɛn we gɛt wan ɔ tu Sayd

Dipen pan riflekta, difyuza ɛn haus dizayn, LGP asɛmbli dɛn kin ɛnjɛnɛri fɔ wan-sayd ɔ dabl-sayd iluminɛshɔn. Dis fכ spεsifa bifo optik-patεn divεlכpmεnt.

Standart Akrilik Layt Gayd Panel Sayz

Wallis de sɔpɔt bak OEM/ODM layt gayd panɛl dɛn akɔdin to kɔstɔm dimɛnshɔn, shep ɛn optik-patɛn layout. Fɔ dizayn dɛn we nɔto standad, gi PDF, DWG ɔ DXF drɔin we de sho di panɛl saiz we dɔn dɔn, di LED pozishɔn dɛn, di say we gɛt layt ɛn di mɛkanikal ficha dɛn.

Laser Dotted LGP vs Ɔdinari Klia Akrilik

Aw fɔ Impruv Layt Gayd Panɛl Yunifɔmiti

Yunifɔm braytnɛs de ditarmin bay di kɔmplit optik asɛmbli, nɔto jɔs bay di akrilik matirial. Di laser patɛn, LED, ed, riflɛkta, difyuza ɛn haus fɔ wok togɛda.

• Match laser-dot density to di distans frɔm di LED input edj.

• Yuz kɔnsistɛns LED pitch ɛn stebul LED braytnɛs.

• Kip di LED sɔs klos alaynɛd ​​wit di akrilik ɛntrɛ edj.

• Yuz wan edj we smol ɛn we dɛn dɔn prosɛs fayn fayn wan fɔ mek layt go insay.

• Ad riflektiv matirial biɛn singl-sayd LGP asɛmbli usay dɛn nid am.

• Yuz wan difyuza we fit we di aplikeshɔn nid fɔ gɛt say we saf we pɔsin kin si.

• Prɛvent mɛkanikal gap bitwin LED strip dɛn ɛn di LGP edj.

• Prototype big ɔ unusual aspek-rɛshɔn panɛl bifo mas prodakshɔn.

Aplikeshɔn fɔ Akrilik Laser Dotted Layt Gayd Panɛl dɛn

Advatayzmɛnt Layt Bɔks dɛn

Laser dotted LGP dɛn de yuz bɔku bɔku wan na slim advatayzmɛnt layt bɔks usay dɛn nid yunifom iluminɛshɔn biɛn print grafik, posta ɔ translucent displei matirial.

Menyu Bɔd dɛn

Rɛstɔrant dɛn, kafe dɛn ɛn fud-savis brand dɛn kin yuz LGP baklaytin fɔ mek tin layt menyu displei dɛn we gɛt kɔnsistɛns layt akɔdin to di grafik sɔfays.

Ritayl ɛn POS Displei dɛn

Kastom akrilik layt gayd dɛn kin intagret insay shelf, kɔnta, prɔmoshɔnal displei, layt branding panɛl ɛn pɔynt-ɔf-sɛl fiks.

Ɛgzibishin ɛn Miusiɔm Displei dɛn

Tin ed-lit panɛl dɛn kin gi kɔnsil layt fɔ ɛgzibishin grafik, infɔmeshɔn panɛl ɛn prodak prɛzɛntɛnshɔn usay limited instɔleshɔn dip de.

Akitekchral ɛn Dɛkɔretiv Layt

Yu kin put akrilik LGP panɛl dɛn insay dɛkɔretiv wɔl, fɔnicha, siling ɛn intɛriɔ layt ficha usay dizayna dɛn nid wan tin plen we gɛt layt.

Kastom Optik ɛn Ilɛktronik Asɛmbli dɛn

Dɛn kin divɛlɔp kɔstɔmayz LGP dɛn bak fɔ spɛshal displei, kɔntrol panɛl, inschrumɛnt ɛn ɔda optik asɛmbli dɛn. Projek wit strikt optik rikwaymɛnt fɔ gi drɔin ɛn target pefɔmɛns fɔ injinɛri ɛvalueshɔn.

Aw fɔ Pik Akrilik Layt Gayd Panɛl

1. Kɔnfɛm Panɛl Dimɛnshɔn dɛn

Gi di rayt lɔng ɛn waid we dɛn dɔn dɔn. Panɛl dimɛnshɔn dɛn kin inflɔws layt travul distans, di LED-ɛntrɛ sayd dɛn we dɛn nid ɛn laser-dɔt distribyushɔn.

2. Pik di Tik

Wallis naw de list tiknes frכm 3–12 mm. Di tik we fit dipen pan di panɛl dimɛnshɔn, mɛkanikal rikwaymɛnt, LED jɔyometri ɛn optik dizayn.

3. Kɔnfɔm LED Input Ɛj dɛn

Tɛl Wallis if di LED dɛn go kam insay frɔm wan ɛj, tu ɔpɔzit edj ɔ ɔda arenjmɛnt. Di dot patɛn fɔ disayn rawnd di las LED pozishɔn dɛn.

4. Gi LED Strip Spɛsifikeshɔn dɛn

LED pitch, pawa, kala tɛmpracha, strip wit ɛn luminous autput afɛkt di LGP dizayn. So, dɛn fɔ put di LED infɔmeshɔn we dɔn de insay we dɛn de aks fɔ kɔstɔmayt layz patɛn.

5. Kɔnfɛm Singl- ɔ Dabl-Sayd Ɛmishin

Singl-sayd panɛl dɛn tipikli yuz riflɛktiv matirial biɛn di LGP, we dabl-sayd iluminɛshɔn nid difrɛn kɔmplit ɔptik strɔkchɔ. Spɛsifik di efyushɔn dairekshɔn we dɛn nid bifo dɛn prodyuz.

6. Sho di Braytnɛs ɛn Yunifɔm we Yu nid

If di projɛkt gɛt target luminans, yunifɔmiti rɛshɔn ɔ iluminɛns rikwaymɛnt, gi di numɛrik target so dat dɛn go ebul fɔ evaluate di optik dizayn agens mɛzhɔbal pefɔmɛns pas jenɛral tɛm dɛn lɛk 'hay braytnɛs.'

7. Gi di Mɛkanikal Drɔin

Kastom ol, slot, kɔv ɛn irɛgyula kɔntɔ fɔ de insay PDF, DWG ɔ DXF fayl so dat dɛn go ebul fɔ evalyu optik ɛn CNC prɔsesin togɛda.

Rikɔmɛnd Kɔmpɔnɛnt fɔ wan Kɔmplit Ɛj-Lit LGP Sistɛm

OEM ɛn Kastɔm ​​Akrilik LGP Sɛvis

Wallis de gi wan-stɔp prɔsesin sɔpɔt frɔm akrilik matirial sɛlɛkshɔn tru laser optik prɔsesin ɛn CNC fabrikeshɔn. Dɛn kin mek prɔjɛkt dɛn we dɛn kɔstɔmayt akɔdin to di drɔin dɛn ɛn di las layt we dɛn nid.

• Kastom lɔng ɛn waid

• 3–12 mm tik opshɔn dɛn

• Kastom laser dot patɛn

• V-kכt optik prכsεsin

• CNC kot ɛn shep

• Hole drilling ɛn kɔstɔm opin dɛn

• LED konfigyushɔn kɔnsultɛshɔn

• Riflɛkta ɛn difyuza maching sɔpɔt

• Prototype ɛn sampul ɛvalueshɔn

• Pre-assembled layt panɛl sɔpɔt

• Ekspɔt pakej dɛn

• OEM / ODM prodakshɔn

Infɔmeshɔn Nid fɔ Wan Kɔrɛkt LGP Kɔt

• Finished panɛl lɔng ɛn wit

• Tik we dɛn nid

• Kwantiti we dɛn nid

• LED tayp ɛn LED pitch

• LED input edj pozishɔn dɛn

• Ilɛminɛshɔn we gɛt wan ɔ tu sayd

• Target braytnɛs ɔ luminans, if dɛn spɛsifa am

• Yunifɔmiti rikwaymɛnt, if dɛn spɛsifa am

• Laser-dot ɔ V-cut prɛferɛns

• CNC ol, slot ɔ kɔstɔm kɔntɔ

• Riflɛkta ɛn difyuza kɔnfigyushɔn

• Di we aw dɛn de yuz am ɛn fɔ instɔl am

• Di tin we dɛn nid fɔ pak

• PDF, DWG ɔ DXF drɔin

Wokshɔp, Pakɛj ɛn Globɛl Sapɔt

Kastom akrilik LGP panɛl dɛn nid fɔ gɛt protɛkshɔn agens skrach, ed damej ɛn kɔntaminɛshɔn we dɛn de transpɔt. Wallis de sɔpɔt ɛkspɔt pak akɔdin to panɛl saiz, kwantiti ɛn dilivri rikwaymɛnt.

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt Akrilik Layt Gayd Panɛl dɛn

Wetin na akrilik layt gayd panɛl?

Akrilik layt gayd panɛl na optik PMMA plet we dɛn mek fɔ gayd layt frɔm LED dɛn we dɛn dɔn put na di ed ɛn sheb am akɔdin to big layt we gɛt layt we de yuz lɛsa dɔt, layn dɛn we dɛn rayt ɔ ɔda layt-ɛkstrakshɔn strɔkchɔ.

Wetin na di rizin fɔ lɛza dɔt dɛn na layt gayd plet?

Lεzεr dכt dεm de intarap intanεt rεflεkshכn εn ridayrekt kכntroled pat dεm fכ layt kכmכt na di PMMA sεf. Dɛn density ɛn spacing kin ajɔst fɔ impɔtant braytnɛs yunifom akɔdin to di panɛl.

Us tik tik dɛn de?

Di kɔrɛnt Wallis prodakt spɛsifikɛshɔn de list akrilik LGP tiknɛs frɔm 3–12 mm . Selekshɔn fɔ bi bays pan panɛl saiz, LED kɔnfigyushɔn ɛn mɛkanikal rikwaymɛnt dɛn.

Wallis kin mek kɔstɔm-sayz layt gayd panɛl dɛn?

Yɛs. Standart dimɛnshɔn dɛn de, ɛn kɔstɔm saiz dɛn kin bi CNC prɔses akɔdin to di drɔin dɛn we dɛn dɔn gi ɛn di optik-dizayn rikwaymɛnt dɛn.

Yu tink se dɛn kin kɔstɔmayt di laser dɔt patɛn?

Yɛs. Laser-dot saiz, spacing ɛn density kin ajɔst akɔdin to di panɛl dimɛnshɔn, LED pozishɔn ɛn target layt pefɔmɛns.

Wetin na di difrɛns bitwin laser dɔt ɛn V-kat layn dɛn?

Laser dot dɛn de yuz distributed micro-points fɔ pul layt, we V-cutting de yuz linear grooves. Dɛn tu we ya kin kɔntrol layt ɛkstrakshɔn, bɔt di we we fit pas ɔl dipen pan di panɛl dimɛnshɔn, LED arenjmɛnt ɛn optik dizayn.

Aw klos di LED strip fɔ de to di LGP edj?

LED dɛn fɔ jɔs de rili nia ɛn alaynɛd ​​kɔrɛkt wan wit di layt-ɛntrɛ edj so dat layt go kɔpl fayn fayn wan insay di PMMA. Eksakt spays dipen pan di LED pakej, strip dizayn ɛn freym strɔkchɔ.

Yu tink se di akrilik ed nid fɔ polish?

Wan smol, we dɛn dɔn prosɛs fayn fayn wan layt-ɛntrɛ edj jɔs de mek di optik kɔpl bɛtɛ. Di edj finish we dɛn nid fɔ bi pat pan di LGP ɛn LED asɛmbli dizayn.

Yu tink se dɛn kin layt di panɛl frɔm wan ɛj?

Yes, dipen pan di panɛl dimɛnshɔn ɛn di braytnɛs we dɛn nid. Big panɛl dɛn kin bɛnifit frɔm tu ɔ mɔ LED input edj dɛn fɔ mek dɛn gɛt wanwɔd ɛn fɔ mek dɛn gɛt layt autput we de.

LGP kin layt ɔl tu di say dɛn?

Dabl-sayd iluminɛshɔn pɔsibul wit wan aprɔpriet optik ɛn mɛkanikal dizayn. Wan sayd sistem kin yuz tin dɛn we de sho di tin dɛn we de apin biɛn di panɛl fɔ dayrɛkt mɔ layt to wan say.

Yu tink se dɛn kin kɔt di LGP ɔ drɔl am na CNC?

Yɛs. Wallis de sɔpɔt CNC kɔt, trim, drɔlin ɛn kɔstɔm shep dɛn akɔdin to prodakshɔn fisibiliti ɛn kɔstɔma drɔin dɛn.

Us drɔin fɔmat dɛn a kin sɛn?

Di prodak infɔmeshɔn we de naw de list JPG, PDF, DWG ɛn DXF fɔmat fɔ kɔstɔm LGP ɛvalueshɔn ɛn prɔsesin.

Yu tink se dɛn nid fɔ gɛt riflɛkta biɛn di LGP?

Riflɛktiv bak na in dɛn kin yuz na wan sayd ed-lit sistem bikɔs i de ridayrɛkt layt we ɔda we go kɔmɔt na di riya sɔfays. Dabl-sayd transparent layt sistem dɛn kin yuz difrɛn strɔkchɔ.

Yu tink se dɛn nid fɔ yuz difyuza?

Bɔku tɛm dɛn kin yuz difyuza usay di say we pɔsin kin si fɔ tan lɛk se i soft ɔ usay di ditil dɛn we dɛn kin pul pan di optik nid fɔ blɛnd wit yu yay. Di rikwaymɛnt dipen pan di fayn aplikeshɔn ɛn optik apinans.

Yu kin yuz akrilik LGP na do?

Di standad prodakt na fɔ indo aplikeshɔn dɛn mɔ. Di projɛkt dɛn we de na do fɔ spɛsifa UV ɛksplɔshɔn, mɔstɔ, tɛmpracha ɛn ɛnklɔz kɔndishɔn so dat dɛn go ebul fɔ evalyu wan fayn matirial ɛn protɛktiv strɔkchɔ.

Us infɔmeshɔn a fɔ gi fɔ LGP kot?

Gi di panɛl dimɛnshɔn, tiknes, kwantiti, LED tayp, LED pitch, layt-input edj, singl- ɔ dabl-sayd layt rikwaymɛnt, target braytnɛs, aplikeshɔn, CNC ficha ɛn wan PDF, DWG ɔ DXF drɔin usay i pɔsibul.

Rikwest wan Kot fɔ Kastɔm ​​Akrilik Laser Dotted LGP

Yu de luk fɔ kɔstɔm akrilik layt gayd panɛl manifakta fɔ LED layt bɔks, sayn, rital fiks, mɛnyu bod ɔ OEM layt sistem? Wallis de gi optik-grɛd PMMA panɛl dɛn wit laser-dɔt prɔsesin, V-kɔtin, CNC fabrikeshɔn ɛn projɛkt-bɛs optik kɔstɔmayshɔn.

Send yu dimɛnshɔn, tik, LED kɔnfigyushɔn, drɔ ɛn target layt rikwaymɛnt fɔ gɛt wan fayn LGP rɛkɔmɛndishɔn ɛn kot.