|
Wallis -PVC Krataa a Wɔde Di Dwuma
Wallis na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Nneɛma: | |
| mfaso: | |
| Dodow: | |
Wallis customized thickness skin-touch PVC furniture film yɛ premium decorative surface material a wɔayɛ ama kitchen cabinets, wardrobe apon, furniture panels, mu apon, ɔfasu panels, shelves, ahɔhodan mu nneɛma, office furniture, retail fixtures, ne afoforo dan mu asiesie nnwuma.
Matte a ɛyɛ mmerɛw no ma nsa te nka a ɛyɛ torotoro, ɛyɛ hyew, na ɛyɛ velvet bere a ɛboa ma nsateaa nkyerɛwee a wotumi hu ne da biara da nkekae so tew. Wobetumi aka sɛnea wɔayɛ no sɛnea wɔpɛ, ne kɛse, ne kɔla, ne nwene, ne tɛtrɛtɛ, ne tenten, ne roll tenten, akyi ayaresa, ne ahobammɔ a wɔde kyekyere nneɛma ho asɛm sɛnea adetɔfo no substrate, ɔkwan a wɔfa so yɛ adwuma, dan mu nneɛma nhyehyɛe, ne nneɛma a wɔhwehwɛ te.
Wɔayɛ ama furniture manufacturers, cabinet factories, panel laminators, distributors, ne OEM interior brands, saa flexible decorative PVC film yi betumi asusuw flat lamination, vacuum anaa membrane pressing, profile wrapping, ɔhyew pressing, ne paw curved furniture afã horow.
Bisa Skin-Touch PVC Film Nhwɛsode
| Aguade no Edin | Amanneɛbɔ Thickness Skin-Touch PVC Furniture Film |
|---|---|
| Atadeɛ | PVC asiesie dan mu nneɛma sini |
| Surface Feel (Nneɛma a Ɛwɔ Anim). | Soft touch, skin touch, velvet touch, peach-skin feel, anaasɛ tumi a wɔde ka ade a wɔayɛ no sɛnea wɔpɛ |
| Aniwa so Finish | Super matte, deep matte, low gloss, anaasɛ customized wie a egyina nhwɛsode pene so |
| Nneɛma a ɛyɛ den | Customized sɛnea substrate, processing kwan, forming bun, surface ahwehwɛde, ne application |
| Kɔla ne Nneɛma a Wɔde Asiesie | Kɔla ahorow a ɛyɛ den, nnua a wɔde ayɛ aburow, marble, ɔbo, ntama a wɔde ayɛ, ne nneɛma a wɔde asiesie nneɛma a wɔayɛ no sɛnea wɔpɛ |
| Nneɛma a Wɔpaw wɔ Surface | Anti-sateaa nkyerɛwee, stain-resistant, scratch-resistant, mmerɛw-hohoro, ne afoforo dwumadi coatings a egyina grade confirmation |
| Akwan a Wɔfa so Di Dwuma | Flat lamination, membrane pressing, vacuum forming, profile wrapping, ɔhyew a wɔde mia, ne akwan a wɔapaw a wɔde kata anoano so |
| Substrates a Wɔtaa Yɛ | MDF, particle board, plywood, fiberboard, ne nneɛma afoforo a ɛfata furniture substrates akyi nhyehyɛe validation |
| Nnwuma a Wɔde Di Dwuma | Kabinet, ntamadan, dan mu apon, ɔfasu ho ntama, dan mu nneɛma anim, ɔfese nneɛma, ahɔhodan mu nneɛma, aguadidan mu nneɛma, ne ntaaboo a wɔde siesie fie |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Ne kɛse, kɔla, nneɛma a wɔde asiesie, embossing, gloss, touch, ne trɛw, roll tenten, akyi ayaresa, ahobammɔ film, labels, ne packaging |
Nsɛm a wɔahyɛ no nsow: Ɛsɛ sɛ wɔde nhwɛsode a wɔapene so, mfiridwuma mu apam, ne nneɛma a wɔyɛ ho sɔhwɛ ansa na wɔayɛ nneɛma pii so si nea etwa to a ɛyɛ den, ne tɛtrɛtɛ, ne tenten, ne soro adwumayɛ, ne ntama a ɛne ne ho hyia, tumi a ɛma ɛyɛ, ne nea ɛma wotumi gyina nneɛma a ɛyɛ papa ano so dua.
Skin-touch PVC furniture film yɛ decorative surface film a ɛyɛ mmerɛw, ɛyɛ mmerɛw, na ɛyɛ velvety tactile finish. Wobetumi aka ho asɛm nso sɛ PVC krataa a wɔde ka ho brɛoo, nkokoaa honam ani sini, peach honam ani sini, suede-ka sini, anaasɛ dan mu nneɛma a ɛyɛ fɛ yiye. Wɔayɛ ɔfasu no ama dan mu nneɛma a wɔayɛ wɔ baabi a sɛnea wohu ne nsa a wɔte nka nyinaa nya nneɛma a wosusuw sɛ ɛyɛ papa no so nkɛntɛnso.
Nea ɛnte sɛ sini a wɔtaa de yɛ dan mu nneɛma a ɛhyerɛn no, nea wɔde ka honam ani hwɛbea no ma hann a ɛda adi no so tew na ɛma ɛyɛ hyew na ɛyɛ komm. Eyi ma ɛfata ma kabinet apon a nsa nnim, ntadekorabea, mpa mu nneɛma, ɔfese nhyehyɛe, ahɔhodan mu nneɛma, ɔfasu ho nneɛma, ne aguadidan mu nneɛma a ɛyɛ fɛ.
Wobetumi de nea ɛko tia nsateaa nkyerɛwee ne adwumayɛ a ɛnyɛ den sɛ ɛho tew aka ho denam ɔfasu a wɔapaw no so. Esiane sɛ ɛsono sɛnea wɔyɛ no sɛnea sini no yɛ, kɔla, ɛhyerɛn, ɔkwan a wɔfa so sɔ hwɛ, nnuru a wɔde tew nneɛma ho, ne nneɛma a atwa yɛn ho ahyia a wɔde di dwuma awiei nti, ɛsɛ sɛ adetɔfo hwehwɛ nhwɛsode a ɛyɛ ananmusifo mu sen sɛ wɔde wɔn ho bɛto nneɛma ho nkyerɛkyerɛmu a ɛfa nneɛma nyinaa ho nkutoo so.
Ɔfã a ɛyɛ mmerɛw no ma furniture anim nya nsa-te nka a wɔayɛ no yiye a ebetumi aboa ma wɔahu nsonsonoe a ɛda premium collections ne standard laminated products ntam. Nkɛntɛnso a wɔde ka ade no som bo titiriw wɔ apon, nkataso, ntadekorabea, pon, pon, ne nnua a wɔn a wɔde di dwuma no taa de wɔn nsa ka no so.
Matte a emu dɔ a wɔde wie no brɛ adwene a ɛyɛ katee ase na ɛma ɛyɛ nea ɛyɛ komm wɔ aniwa so. Ɛne nnɛyi kɔla ahorow a ɛyɛ den, abɔde mu nnua aburow, ɔbo, dade, ahwehwɛ, ne ntama a wɔde ayɛ dan mu nneɛma yɛ adwuma yiye, na ɛboa nnɛyi dan mu nneɛma a ɛnyɛ den, ɛyɛ hyew, ne nea ɛyɛ fɛ.
Nneɛma a wɔapaw a wɔde kata so boa ma nsateaa nkyerɛwee, ngo agyiraehyɛde, ne nkekae a ɛwɔ dan mu nneɛma a wɔtaa di ho dwuma no so tew. Eyi ho wɔ mfaso titiriw ma kɔla a ɛyɛ tuntum a ɛyɛ matte, kabinet anim a nsa nnim, ntadekorabea apon, ɔfese nneɛma, ne aguadidan mu nneɛma a wɔde kyerɛ.
PVC film betumi akyerɛ ama tratraa, profiles a wɔabɔ, curved edges, routed apon, ne selected formed components. Ɔdansi a ɛfata no gyina ne kɛse, plasticization, coating, embossing, forming bun, radius, adhesive, ɔhyew, nhyɛso, ne onwini tebea horow so.
Sɛnea wɔayɛ no sɛnea wɔpɛ no ma sini no kari pɛ ma ɛyɛ mmerɛw, ɛnyɛ nea ɛda adi pefee, sɛnea ɛte no mu dɔ, sɛnea wɔde di dwuma, sɛnea wɔyɛ no, ne ahobammɔ a wɔbɔ wɔ soro. Ɛsɛ sɛ wɔpaw grade a ɛfata sɛnea board ankasa, profile geometry, afiri, adhesive, adwumayɛ ahoɔhare, ne target furniture application te.
Kɔla ahorow a ɛyɛ den, nnua aburow, marble, ɔbo, ntama mu nsunsuanso, ne nneɛma a wɔayɛ no sɛnea wɔpɛ betumi aboa wɔn a wɔyɛ dan mu nneɛma a wɔyɛ no ma wɔayɛ nneɛma a wɔaboaboa ano a wɔayɛ no biako. Ɛsɛ sɛ adetɔfo pene kɔla, nsusuwso nsenia, embossing, gloss, ne touch a wɔde honam fam nhwɛsode ahorow di dwuma wɔ kanea a wɔpɛ sɛ wɔde di dwuma no ase so.
Film thickness nya flexibility, opacity, surface feel, embossing nkyerɛase, processing stability, edge suban, ne total material cost. Ɛnyɛ ɔkwan a ɛyɛ den sen biara no nyɛ nea eye sen biara; nkyerɛkyerɛmu a ɛteɛ ne nea ɛma nea egyina pintinn ba wɔ adetɔfo no nnwinnade ne panel a wɔawie no so.
| Dwumadie Ahwehwɛdeɛ | Thickness Selection Nsusuiɛ | Nneɛma a Wɔde Di Dwuma |
|---|---|---|
| Lamination a ɛyɛ tratraa | Kari pɛ wɔ soro petee, opacity, rigidity, roll handling, ne adhesive transfer | Bond ahoɔden, bubbles, telegraphing, gloss consistency, ne cutting quality |
| Membrane anaa Vacuum a Wɔde Mia | Paw flexibility ne elongation a ɛdɔɔso ma routed profiles, corners, ne formed edges | Forming bun, ntwea so fitaa, texture distortion, adhesive activation, ne onwini |
| Profile a Wɔde Bɛkyekyere | Fa grade a ɛne profile geometry, line speed, tension, ne radii nketewa hyia di dwuma | Edge lifting, spring-back, wrinkle formation, adhesive wetting, ne trim su |
| Nneɛma a Wɔde Ka Nneɛma a Ɛyɛ Den Anim | Fa sɛnea wotumi de wo nsa ka, sɛnea wɔde kata so no kyɛ, sɛnea ɛnyɛ hann, ne ahobammɔ a ɛwɔ soro no di kan | Nsateaa nkyerɛwee a wotumi hu, ɛrentumi nsɛe, nkekae a ɛko tia, ahotew, ne nea ɛho ntew |
| Nneɛma a Wɔyɛ a Ɛdɔɔso a Ɛka Ho | Optimize thickness a wommɔ afɔre a wɔhwehwɛ sɛnea ɛte ne processing stability | Yield, roll consistency, scrap rate, line ahoɔhare, wie su, ne ɔsom adwumayɛ |
Sɛ worebisa sɛnea wɔayɛ no sɛnea wopɛ a, fa substrate type, board dimensions, surface ahosiesie, processing kwan, forming bun, minimum radius, adhesive nhyehyɛe, nnwinnade model, line ahoɔhare, adwumayɛ hyew, nhyɛso, ne wie application ma. Saa nsɛm yi boa ma sampling cycles ne production asiane so tew.
Kɔla a ɛyɛ den fata ma nnɛyi kabinet, ntamadan, ɔfese, mpa, ne aguadi mu nneɛma a wɔaboaboa ano. Wobetumi ayɛ kɔla ahorow a ɛnyɛ afã biara a ɛyɛ beige, fitaa, fitaa, tuntum, bruu, ahabammono, bruu, ne adwuma pɔtee bi a egyina nhwɛso ne ne yɛ a wosi so dua so.
Nsusuwii a wɔde nnua ayɛ no ka abɔde mu aniwa su ne ade a ɛyɛ mmerɛw a wɔde ka ho bom. Ɛsɛ sɛ wɔsɔ nhwɛsode a wɔsan yɛ, tintim akwankyerɛ, embossing a ɛne ne ho hyia, kɔla kari pɛ, ne adjacent-panel matching hwɛ bere a wɔregye nhwɛsode no.
Marble, ɔbo, ntama, aboa nhoma a wɔde ayɛ, ne nneɛma afoforo a wɔde siesie fie betumi aboa ɔfasu ho ntama, aguadidan mu nneɛma, ahɔhodan mu nneɛma, mmeae a wogye ahɔho, ntadekorabea, ne nneɛma a wɔde siesie fie nhyehyɛe a wɔayɛ no biako. Ɛsɛ sɛ wɔhwɛ nsusuwso akɛse mu wɔ panel kɛse a wɔawie mu ansa na wɔapene so.
Wobetumi de nneɛma a ɛko tia nsateaa nkyerɛwee, nkekae, ɛnyɛ den sɛ wɔbɛhohoro, ɛnyɛ nwene, anaa nneɛma afoforo a wɔde sa sini no ayɛ a egyina ɔfã a wɔapaw so. Ɛsɛ sɛ wɔpene sɔhwɛ akwan a wɔhwehwɛ ne anohyeto ahorow a wɔde gye tom so ansa na wɔayɛ nneɛma pii.
Wɔtaa de MDF di dwuma ma dan mu nneɛma anim a ɛyɛ tratraa, kabinet apon a wɔafa so, ntadekorabea apon, mu apon, ne ɔfasu a wɔde asiesie. Ɛsɛ sɛ board no yɛ torotoro, ɛyɛ nwunu, ɛho tew, ɛyɛ den, na mfutuma anaa sintɔ biara nni ho ansa na wɔayɛ no lamination.
Wobetumi de particle board ne plywood ayɛ dan mu nneɛma a ɛyɛ tratraa ne emu panels a wɔapaw bere a wɔde sanding, ahyɛ mu ma, priming, anaa nneɛma foforo a wɔde siesie nneɛma a ɛwɔ soro no awie no. Bonding adwumayɛ gyina board anim ankasa ne adhesive nhyehyɛe no so.
Flat lamination fata ma cabinet panels, wardrobe apon, desk panels, shelves, ɔfasu panels, retail fixtures, ne flat boards afoforo. Di adhesive coating, nip pressure, temperature, line speed, tension, ne cooling so na ama woakɔ so ayɛ matte pɛ.
Wobetumi asusuw grades a ɛfata a ɛyɛ mmerɛw ho ama MDF apon a wɔafa so, kabinet anim a wɔayɛ no sɛnea ɛte, anoano a ɛyɛ kurukuruwa, ne nneɛma a wɔapaw a ɛwɔ afã abiɛsa. Ɛsɛ sɛ wɔsɔ sɛnea wɔyɛ no mu dɔ, ntwea so radius, sɛnea wɔkora so, ɔhyew kyinhyia, adhesive activation, vacuum level, ne cooling kwan no hwɛ.
Profile wrapping betumi de soft-touch finish no adi dwuma wɔ mouldings, apon frames, trims, shelves, furniture anoano, ne nnua a wɔapaw, PVC, WPC, aluminium, anaa composite profiles bere a wɔasɔ ahwɛ sɛnea ɛne no hyia akyi.
Ɛsɛ sɛ adhesive a wɔpaw no susuw film no akyi, substrate, nnwinnade, activation temperature, pressure, bere a wobue, production ahoɔhare, humidity, ɔhyew a ɛda adi, ne finished-panel ahwehwɛde ahorow ho. Fa nneɛma a wɔde yɛ ankasa no di dwuma ma bond-strength ne onyin ho sɔhwɛ ahorow.
Skin-touch PVC film ma kitchen fronts yɛ matte hwɛbea a ɛyɛ torotoro na ahotɔ tactile surface. Nneɛma a wɔde ko tia nsateaa nkyerɛwee no ho wɔ mfaso titiriw ma apon a enni nsa ne kɔla a ɛyɛ den a ɛyɛ tumm. Ɛsɛ sɛ wɔsɔ panels a edi mũ hwɛ sɛ ɛyɛ hyew, ɛyɛ nwini, ɛho tew, anoano a ɛkata so, ne sɛnea wɔde ntama yɛ adwuma anaa.
Ntamadan apon, mpa ho nkuku, pon a wɔde siesie nneɛma, drawer anim, ne mpa a wɔayɛ no pɛpɛɛpɛ no nya mfaso fi baabi a ɛhɔ yɛ hyew a ɛnyɛ hann pii no. Ɛsɛ sɛ apon akɛse a ɛbɛn ho no de batch a wɔapene so ne sini akwankyerɛ a ɛkɔ so daa di dwuma ma aniwa a ɛne ne ho hyia yiye.
Wobetumi de sini no adi dwuma wɔ apon a ɛwɔ dan no mu a ɛne ne ho hyia, afasu a ɛwɔ afã horow, mpa ti, nneɛma a wɔde asiesie mu, akyi agyede, ne mfinimfini nhyehyɛe ahorow a wɔayɛ no biako so. Substrate, anoano, nkwaa, ne ɔkwan a wɔfa so de si hɔ no na ɛkyerɛ sɛnea nhyiam a edi mũ no bɛyɛ adwuma.
Ɔfese pon, nneɛma a wɔkora so, agyede counter, ahɔhodan mu casegoods, adidibea nneɛma, sotɔɔ mu nneɛma, display panels, ne retail counters betumi de sini a wɔde ka honam ani hwɛbea adi dwuma de ayɛ nea ɛyɛ fɛ bere nyinaa. Ɛsɛ sɛ nnwuma a kar pii fa so no kyerɛ sɔhwɛ ahorow a ɛho hia a ɛfa abrasion, stain, ahotew, ne nnuru a ɛko tia ho.
PVC, PETG, PP, acrylic, ne painted surfaces nyinaa betumi ama matte furniture finishes, nanso wɔn processing suban, surface structure, ɛka, ne performance grades a ɛwɔ hɔ no yɛ soronko. Table a edidi so yi yɛ akwankyerɛ a ɛfa paw a wɔpaw no nyinaa ho sen sɛ ɛbɛyɛ nea wɔde besi mfiridwuma ho nsɛm ne sɔhwɛ a wɔyɛ ananmu.
| Selection Factor | Skin-Touch PVC Film | PETG anaa PET Nneɛma a Wɔde Yɛ Nneɛma Film | PP Nneɛma a Wɔde Yɛ Nneɛma Film | Painted anaa Lacquered Panel |
|---|---|---|---|---|
| Typical Surface a Ɛyɛ Fɛ | Soft matte, embossed, printed, ne flexible afɛfɛde nsunsuanso | Matte anaa gloss surfaces a ɛyɛ torotoro a wɔde grade-specific coatings ahyɛ mu | Matte, textured, printed, anaa solid-kɔla a ɛwɔ soro | Seamless sprayed anaasɛ roller-coated kɔla wie |
| Forming Flexibility | Abasobɔde a ɛfata betumi aboa wrapping ne 3D forming | Egyina sɛnea sini no yɛ, ne kɛse, nea wɔde kata so, ne sɛnea wɔyɛ no so | Egyina grade, ne kɛse, ne ɔkwan a wɔfa so de di dwuma so | Wɔde di dwuma akyi substrate shaping mmom sen sɛ wɔbɛyɛ sɛ film |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Broad choices wɔ thickness, décor, embossing, touch, ne roll kɛse mu | Kɔla, hyerɛn, nea wɔde kata so, ne kɛse, ne ne kɛse gyina nea ɔde ma no so | Kɔla, sɛnea ɛte, sɛnea wɔayɛ no, ne kɛse, ne ne trɛw gyina nea ɔde ma no so | Broad kɔla a ɛyɛ mmerɛw a ɛne coating-process ahwehwɛde ahorow |
| Nneɛma a Wɔyɛ ho Nsusuwii | Ɛhwehwɛ sɛ wɔde ntama, ɔhyew, nhyɛso, ne nhyɛso a ɛne ne ho hyia | Ɛhwehwɛ sɛ lamination nhyehyɛe a ɛne no hyia ne ahwɛyiye a wɔde di dwuma wɔ soro | Ɛhwehwɛ sɛ bonding anaa extrusion-lamination nhyehyɛe a ɛfata | Ɛhwehwɛ sɛ wosiesie, wɔde kata so, wɔde sa yare, mframa a wɔde fa mu, na wɔhwɛ nea wɔde wie so |
| Typical Project Fit | Kabinet, apon a wɔafa so, profile, ntamadan, panels, ne dan mu nneɛma a ɛyɛ den kɛse | Premium flat fronts, furniture panels, ne application ahorow a wɔapaw a wɔahyehyɛ | Furniture panels, ɔfasu ani, ne nhyehyɛe ahorow a wɔapaw a wɔde siesie fie | Custom cabinetry ne premium painted furniture |
Screen mfonini ahorow ntumi nnyina hɔ mma sɛnea obi te nka sɛ ɔde ne nsa ka no brɛoo, sɛnea ɛhyerɛn, nea wɔde hyɛ mu, anaa kɔla ahorow a ɛyɛ anifere kwan so no pɛpɛɛpɛ. Pene honam fam sini nhwɛsode ne laminated panel a wɔawie so wɔ kanea a wɔahyɛ da ayɛ no ase ansa na woasi so dua sɛ wɔbɛyɛ no kɛse.
Yi mfutuma, ngo, nsu, nhama, abon, anhwea agyiraehyɛde, ne nneɛma nketenkete a ayɛ mmerɛw fi hɔ. Matte a ɛwɔ soro no da so ara tumi da telegraph anaasɛ ɛnyɛ pɛpɛɛpɛ a efi board a ɛwɔ ase no mu adi, titiriw wɔ apon akɛse a ɛyɛ tratraa ne kɔla a ɛyɛ den tuntum so.
Fa sini ankasa, substrate, adhesive, nnwinnade, ɔhyew, nhyɛso, ahoɔhare, vacuum kyinhyia, ne onwini kwan no di dwuma. Hwɛ sɛnea ɛbata ho, ntwea so, anoano, ahurututu, nwi, kɔla, hyerɛn, nwene, ntrɛwmu, shrinkage, ne ɔfasu a asɛe.
Ɛsɛ sɛ adetɔ ho nkyerɛkyerɛmu kyerɛkyerɛ sɛnea wogye tom wɔ ne kɛse ne ne tɛtrɛtɛ mu, kɔla nsonsonoe, gloss range, embossing, touch, roll tenten, nkwaa, anoano tebea, sɛnea wɔde kata so, ahobammɔ a wɔde kyekyere nneɛma ho, ne honam fam anaa nnuru mu sɔhwɛ ahorow a ɛho hia.
Fa pon a ɛho tew, rollers, gloves, nnwinnade a wɔde twa nneɛma, ne nneɛma a wɔde kyekyere nneɛma di dwuma. Kwati nhyɛso a ɛboro so a wode bɛboaboa ano, mfutuma, efĩ a wɔde ntama ayɛ, nneɛma a ano yɛ nnam, ne twetwe nnua a wɔawie a wobɛtwe afa mmeae a ɛso yɛ toro.
Fa microfiber ntama a ɛho tew na ɛyɛ mmerɛw yi mfutuma a ayɛ mmerɛw.
Fa nsu a ɛho tew anaa aduru a ɛnyɛ den a wɔde hohoro nneɛma ho di dwuma ma ahotew daa.
Popa ngo, anonne, aduan, nnuru a wɔde yɛ ahosiesie, ink, ne nkekae afoforo ntɛm ara.
Kwati dade aboa nhoma, powder a wɔde twitwiw nneɛma, ntama a ɛyɛ den, nhama, ne nnwinnade a ano yɛ nnam.
Mfa nnuru a ano yɛ den, acid, alkali, anaa nnuru a wɔde kum mmoawa a wɔmpene so nni dwuma.
Sɔ nneɛma a wɔde siesie nneɛma a wɔtɔn hwɛ wɔ nhwɛsode a wɔapene so so ansa na wode adi dwuma daa.
Anti-fingerprint nkyerɛ sɛ nea ɛwɔ soro no ntumi nkyerɛ agyiraehyɛde da. Ɛsono sɛnea wotumi hu ne sɛnea wɔhohoro honam ani ngo, kɔla, kanea, hyerɛn, nea wɔde kata so, mpɛn dodow a wɔhohoro, ne sɛnea wɔhyɛ. Ɛsɛ sɛ wɔde ɔkwan a wɔabɔ wɔn tirim sɛ wɔbɛfa so asiesie ne ɔkwan a wɔfa so siesie no ka adwuma no sɔhwɛ ho.
Wobetumi aka ne kɛse, ne tɛtrɛtɛ, ne roll tenten, ne core kɛse, ne winding akwankyerɛ, roll weight, joint allowance, ne packaging ho asɛm sɛnea customer no lamination anaa forming line te. Si ntrɛwmu a wotumi de di dwuma ne mfiri no akwankyerɛ so dua ansa na woakra.
Adetɔfo betumi de honam fam kɔla chip, furniture panel a wɔapene so, décor reference a wɔatintim, anaa embossing sample ama. Ɛsɛ sɛ wɔsi amanne kwan so nkɔsoɔ a ɛbɛtumi aba, abodwokyɛreɛ, dodoɔ a ɛsua koraa, nhwɛsoɔ kwan, ne production lead ahwehwɛdeɛ so dua ansa na wɔakra.
Wobetumi de akwan a wɔapene so asusuw nsateaa a ɛko tia nsateaa, nea ɛko tia nkekae, nkekae a ɛko tia, nnuru a ɛko tia, ɔhyew a ɛma obi nyin, hann a ɛbata ho, nea ɛbata ho, ne ahwehwɛde afoforo ho. Ɛsɛ sɛ adetɔfo de gyinapɛn ne bo a wogye tom a ɛfata ma bere biara a adwumayɛ ho asɛm bi ho hia kɛse.
Wobetumi aka ahobammɔ wrapping, awiei ahobammɔ, labels, batch identification, pallet kwan, cartons, po so hyɛn agyiraehyɛde, ne project-specific packaging ho asɛm ama export ne OEM ahyɛde.
Amanneɛbɔ thickness mmoa: specifications betumi asusuw ho ama flat lamination, membrane pressing, wrapping, ne soronko furniture applications.
Nneɛma a wɔde siesie nneɛma a ɛyɛ mmerɛw: kɔla a ɛyɛ den, nnua a wɔde ayɛ nnuadewa, marble, ɔbo, nneɛma a wɔde ntama ayɛ, ne nneɛma a wɔayɛ no sɛnea wɔpɛ.
Dwumadie a ɛwɔ soro a wɔpaw: soft-touch, deep matte, anti-fingerprint, mmerɛw-hohoro, stain-resistant, ne scratch-resistant grades a egyina si so dua.
B2B adwuma no mmoa: nkyerɛkyerɛmu nhwehwɛmu ma furniture adwumayɛbea ahorow, cabinet manufacturers, laminators, distributors, ne OEM brands.
Nhwɛsoɔ ne sɔhwɛ mu adansedie: honam fam nhwɛsoɔ ne sɔhwɛ a wɔawie wɔ panel so boa ma kɔla, bonding, forming, ne surface-performance risks so tew.
Ka Wo PVC Furniture Film Project ho asɛm
Sɛ wobɛnya nsɛm a wɔafa aka a ɛyɛ pɛpɛɛpɛ a, fa ne kɛseɛ, ne tɛtrɛtɛ, ne roll tenten a wɔhwehwɛ, core kɛseɛ, kɔla anaa décor, embossing, gloss, touch effect, surface-performance requirements, substrate, ɔkwan a wɔfa so yɛ adwuma, furniture application, order dodoɔ, baabi a wɔrekɔ, packaging, ne test documents a wɔhwehwɛ ma.
Sɛ wopɛ vacuum anaa membrane pressing a, nso fa panel profile, forming bun, minimum radius, adhesive, mfiri model, adwumayɛ hyew, nhyɛso, ne production ahoɔhare ma. Sɛ wopɛ kɔla anaa nkyerɛwee a wopɛ a, fa honam fam nkyerɛkyerɛmu mena bere biara a ɛbɛyɛ yiye.
Nya Factory Quotation a Wɔde Kyerɛw Nsɛm
Ɛyɛ PVC decorative surface film a ɛyɛ mmerɛw, velvety, low-gloss nsa-te nka. Wɔde wie dan mu nneɛma a ɛne ne ho hyia, kabinet apon, ntadekorabea, dan mu apon, ɔfasu ho nneɛma, ne aguadidan mu nneɛma.
Aane. Wobetumi aka thickness ho asɛm sɛnea substrate, adeyɛ, forming bun, flexibility, opacity, texture, durability, nnwinnade, ne ɛka botae. Ɛsɛ sɛ wɔde nhwɛsode a wɔfa so si so dua sɛ nea etwa to a ebetumi aba no.
Anti-fingerprint surface options wɔ hɔ a wobetumi apaw. Nkɛntɛnso no gyina nea wɔde kata so, kɔla, hyerɛn, kanea, nea wɔhyɛ, ne ɔkwan a wɔfa so sɔ hwɛ so, enti ɛsɛ sɛ adetɔfo hwehwɛ nhwɛsode bi mu na wɔkyerɛkyerɛ adwumayɛ gyinapɛn a wɔhwehwɛ mu.
Nneɛma a wubetumi apaw betumi ayɛ kɔla ahorow a ɛyɛ den, nnua aburow, marble, ɔbo, nneɛma a wɔde ntama ayɛ, ne nea wɔayɛ no sɛnea wɔpɛ. Ɛsɛ sɛ wɔde honam fam nhwɛsode ahorow pene kɔla, nsusuwso, embossing, gloss, ne touch so.
Yiw, wobetumi de PVC furniture film a ɛfata ayɛ laminated wɔ MDF a wɔasiesie no yiye so. Ɛsɛ sɛ wɔma adhesive a ɛne ne ho hyia, board mu nsuo, soro su, ɔhyew, nhyɛsoɔ, ahoɔhare, ne onwini di ho adanseɛ ansa na wɔayɛ no dodoɔ.
Wobetumi de membrane anaa vacuum pressing asusuw grades a ɛfata a ɛyɛ mmerɛw ho ama apon a wɔafa so anaasɛ wɔabɔ no. Ɛsɛ sɛ wɔsɔ sɛnea forming no mu dɔ, ne kɛse, film no tenten, sɛnea ɛkora nwene so, sɛnea ɛyɛ adwuma wɔ adhesive mu, ne sɛnea ɛyɛ nwini hwɛ.
Yiw, wobetumi de abasobɔde ahorow a wɔapaw adi dwuma de abɔ profile wrapping. Ɛsɛ sɛ wɔde film no mu duru, akyi ayaresa, profile geometry, adhesive, preheating, nhyɛso, tension, ne line ahoɔhare hyia sɛnea wɔyɛ no.
Standard adhesive format no gyina product specification a wɔahyɛ no den no so. Wɔtaa de ade a wɔde nkata so a wɔapaw no soronko di dwuma wɔ furniture lamination mu, enti ɛsɛ sɛ adetɔfo ka sɛ ebia wohia akyi a wɔanyɛ ho adwuma, akyi a wɔayɛ ho adwuma, anaasɛ ɔdan a wɔde nkata wɔn ho.
PVC no ani tumi gyina dan mu nsu a ɛyɛ daa ano, nanso dan mu nneɛma a wɔde ayɛ no nyinaa ntumi nkɔ nsuo mu ara kwa. Nsuo dwumadie gyina substrate, adhesive, anoano, seams, cutouts, ne installation so.
Ebia grade ahorow a ɛmma nsɛe no wɔ hɔ, nanso ɛsono sɛnea wɔyɛ no sɛnea wɔde kata so ne ɔkwan a wɔfa so sɔ hwɛ so. Ɛsɛ sɛ adetɔfo de scratch anaa abrasion gyinapɛn a wɔhwehwɛ, adesoa, adwinnade, cycles, ne gye a wogye tom no ma.
Fa ntama a ɛyɛ mmerɛw a ɛho tew a nsu anaa aduru a ɛnyɛ den a wɔde hohoro nneɛma ho ka ho di dwuma. Kwati ntama a ɛyɛ den, powder, nneɛma a ano yɛ nnam, ne nnuru a wɔde siw ano a wɔmpene so. Sɔ nneɛma a wɔde tew nneɛma ho a wɔtɔn hwɛ wɔ nhwɛsode bi so ansa na wode adi dwuma daa.
Aane. Wɔkamfo sini nhwɛsode ne finished-panel sɔhwɛ kyerɛ sɛ wɔmfa nsɔ kɔla, gloss, touch, embossing, nsateaa nkyerɛwee a wotumi hu, scratch resistance, adhesive compatability, forming suban, ne ahotew adwumayɛ ho nhwehwɛmu.
Dodow a wɔkra a ɛba fam koraa no gyina sɛ ebia kɔla ne sɛnea wɔayɛ no yɛ nea wɔahyɛ da ayɛ anaasɛ wɔayɛ no sɛnea wɔpɛ, ne ne kɛse, ne tɛtrɛtɛ, ne roll tenten, nea wɔde kata so, nea wɔde ahyɛ akyi, nea ɛbɔ ho ban, ne nea wɔde ahyɛ mu no so. Fa nkyerɛkyerɛmu a wɔhwehwɛ no kɔma ma wɔmfa nsi so dua.
Fa ne kɛse, ne tɛtrɛtɛ, ne roll tenten, kɔla anaa décor, texture, gloss, surface requirements, substrate, processing method, panel geometry, dodow, baabi a wɔrekɔ, packaging, ne sɔhwɛ nkrataa a wɔhwehwɛ ma. Honam fam nkyerɛkyerɛmu ma amanneɛbɔ-nkɔso pɛpɛɛpɛyɛ tu mpɔn.
