Nhwɛsoɔ: 0 Ɔkyerɛwfoɔ: Site Editor Bere a wɔde tintimii: 2025-06-20 Mfiase: Beaeɛ
Holographic PVC nyankontɔn overlay film yɛ transparent anaa semi-transparent card-lamination ade a ɛka soro ahobammɔ ne anim-gyina optical nkɛntɛnso bom. Sɛ wɔde ka plastic kaad nhyehyɛe a wɔayɛ no yiye ho a, nea wɔde kata so no betumi ama nyankontɔn a ɛtwetwe ade, nnyigyei a ɛkɔ so, geometric nsusuwii, ahyɛnsode, nsoromma, asorɔkye, anaa holographic mfonini ahorow a wɔayɛ no sɛnea wɔpɛ bere a ɛma kaad ho nsɛm a ɛho hia a wɔatintim no kɔ so hu no.
Wɔde saa sini ahorow yi yɛ ID kaad, akwan a wɔfa so kɔ hɔ, asɔremma kaad, nokwaredi nkrataa, ahɔhodan mu safe kaad, akyɛde kaad, VIP kaad, sikakorabea kaad, sukuuni kaad, RFID kaad, NFC kaad, ne plastic kaad afoforo a wɔayɛ no laminated a wɔn a wɔyɛ no hwehwɛ sɛ wɔde nsonsonoe a wɔde aniwa hu, ahobammɔ a wɔatintim, ne ahotoso a wotumi paw ka bom.
Nanso, wɔ kaad adwumayɛbea ahorow a wɔyɛ adwumaden fam no, holographic overlay a wɔbɛpaw no hwehwɛ pii sen nyankontɔn nsusuwso a ɛyɛ fɛ a wɔbɛpaw. Ɛsɛ sɛ adetɔfoɔ hwɛ overlay thickness, krataa kɛseɛ, transparency, hologram density, continuous anaa registered pattern, coating side, card substrate, lamination temperature, pressure, finished-card thickness, adwork visibility, RFID compatibility, ne service life a wɔhwehwɛ.
Bisa Holographic PVC Overlay Nhwɛsode ahorow
Holographic PVC nyankontɔn film yɛ PVC ade a ɛne kaad hyia a ɛwɔ diffractive optical pattern. Nneɛma fɛfɛ a ɛwɔ sini no mu anaa nea ɛwɔ so no dannan hann a ɛba no kɔ afã horow, na ɛma kɔla ahorow ne nneɛma a wɔde hu a ɛsakra bere a wɔdan kaad no.
Nea ɛnte sɛ nyankontɔn mfonini a wɔatintim a wɔtaa de di dwuma no, holographic anaa diffractive surface sesa denneennen bere a wohwɛ no na hann no wɔ hɔ no. Ɛdenam sɛnea wɔayɛ no yiye so no, ade a wɔde hwɛ ade no betumi ama kɔla asakra, nsensanee a ɛkɔ, kurukuruwa, nsoromma, emu dɔ, mfonini ahorow a ɛsakra, ahyɛnsode, geometric nneɛma, anaasɛ nsusuwso a ɛsan ba bio.
Wɔ kaad a wɔyɛ mu no, wɔtaa de holographic PVC a wɔde kata so no si core a wɔatintim no so bere a wɔrebɔ kaad no sɛnea ɛbɛyɛ a wɔbɛfa sini a ɛda adi pefee no so ahwɛ kaad adwini no. Afei ade a wɔde kata so no bɛyɛ kaad no ani a wɔawie no fã.
Microscopic diffractive structures tetew hann a ɛdannan no mu kɔ asorɔkye tenten ne akwan horow so. Sɛ ɔkwan a wɔfa so hwɛ ade no sesa a, asorɔkye tenten ahorow du nea ɔhwɛ no nkyɛn, na ɛma nyankontɔn anaa spektral nkɛntɛnso a wotumi hu no ba.
Dabi, nyankontɔn anaa stock holographic mfonini ahorow a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so no betumi adi atirimpɔw bi a wɔde siesie fie ho dwuma titiriw. Holographic nhyehyɛe ahorow a wɔahyɛ da ayɛ a ɛwɔ ahyɛnsode ahorow a ɛyɛ wɔn de, mfonini ahorow a wɔakyerɛw din, nneɛma a ɛyɛ fɛ, nneɛma a ɛma obi tumi keka ne ho, anaa ahobammɔ nneɛma foforo betumi ama mfaso kɛse aba wɔ aniwa so nokwaredi ho.
Mfomso biako a wɔtaa di wɔ baabi a wonya fi mu ne sɛ wɔbɛfa holographic card mu nneɛma biara sɛ ade koro no ara. PVC a wɔde kata so a ɛte sɛ krataa, kaad-printer laminate, varnish, hot-stamping foil, film a ɛde ne ho bata ho, ne holographic card core wɔ nhyehyɛe ne akwan horow a wɔfa so yɛ.
| Nneɛma | Typical Format Dwumadi | a Wɔde Di Dwuma | Titiriw |
|---|---|---|---|
| Holographic PVC Nkatasoɔ Krataa | PVC krataa a ɛyɛ tratraa a ɛyɛ mmerɛw | Industrial card lamination a wɔatintim core nkrataa | Finished-card soro, ahobammɔ ne nyankontɔn / amanne optical nkɛntɛnso |
| Printer a Wɔde Kata So | Roll-format pefee anaa holographic laminate | Wɔde di dwuma akyi card personalization denam lamination module a ɛne no hyia so | Ɛbɔ data a wɔatintim ho ban na ɛde ahobammɔ a wotumi hu ka ho |
| Holographic Varnish / Nneɛma a wɔde hyɛ soro | Teateaa yiye transferred ahobammɔ layer | Wɔde kaad printa a ɛne no hyia na ɛyɛ adwuma | Mfitiase ahobammɔ ne holographic afã a wotumi hu |
| Hot-Stamping Foil a Wɔde Yɛ Nneɛma a Ɛyɛ Hɔ | Carrier film a wɔde optical layers a wotumi de kɔ baabi foforo | Wɔde ɔhyew ne nhyɛso na ɛde kɔ mpɔtam hɔ | Localized logo, patch, stripe anaa ahobammɔ afã |
| Holographic PVC Core Krataa a Wɔde Di Dwuma | PVC a ɛyɛ den a ɛyɛ structure/decorative | Wɔatintim na wɔayɛ no laminated wɔ card nipadua no mu | Decorative card nipadua sen sɛ transparent akyi ahobammɔ |
Nhwɛso bi a ɛkɔ so san ba bio wɔ holographic sini no nyinaa so te sɛ wallpaper. Enti kaad ankorankoro betumi anya afã horow a ɛsono nea wɔayɛ no mpɛn pii no gye sɛ wɔahyɛ da de nhwɛsode a wɔsan yɛ no ne sɛnea wɔatwa no hyia.
Nsusuwii a ɛkɔ so no fata ma nyankontɔn nsunsuanso, nsoromma, asorɔkye, nsensanee, geometric nhyehyɛe ne ahosiesie nhyehyɛe afoforo a ɛho nhia sɛ wɔde nneɛma pɔtee bi si kaad biara so.
Wɔde hologram a wɔakyerɛw din asi hɔ wɔ beae bi a wɔahyɛ so wɔ kaad biara a wɔawie so. Sɛ nhwɛso no, ahyɛnsode a wɔahyɛ da ayɛ no betumi apue wɔ atifi nifa so gyinabea koro no ara wɔ kaad biara so, anaasɛ wobetumi ayɛ holographic nsusuwso no atwa mfonini, chip, nsaano nkyerɛwee panel, QR code, anaa kaad nɔma ho ahyia.
Holographic overlays a wɔakyerɛw din hwehwɛ sɛ wɔhwɛ krataa no nsusuwii so denneennen, pattern repeat, X/Y registration, lamination alignment, printing registration ne punching position.
Stock holographic sini ahorow de master designs a ɛwɔ hɔ dedaw te sɛ nyankontɔn grids, nsoromma, nsensanee, asorɔkye, kurukuruwa, hann hann, geometric elements, anaa nneɛma afoforo a ɛsan ba bio di dwuma. Mpɛn pii no ɛnyɛ den sɛ wobenya afi mu efisɛ enhia sɛ wɔbɔ holographic master foforo biara.
Esiane sɛ adetɔfo pii betumi anya nsusuwso a wɔde di dwuma wɔ ɔkwan a ɛyɛ ne nyinaa so nti, ɛsɛ sɛ wobu no titiriw sɛ ade a wɔde siesie anaasɛ ɛyɛ ade titiriw a wɔde hwɛ sɛnea wɔde aniwa hu sen sɛ wɔde bɛyɛ adansedi krataa soronko a ɛko tia atoro.
Holographic overlays a wɔayɛ no sɛnea wɔpɛ no betumi de adwumakuw bi ahyɛnsode, asoɛe din, aban agyiraehyɛde, adwuma no agyiraehyɛde, nkyerɛwee, geometric mfonini, mfonini a wɔsakra, kankyee nsunsuanso, anaa nneɛma a wɔde hu a ɛyɛ wɔn dea aka ho.
Hologram a wɔahyɛ da ayɛ a wɔahyɛ da ayɛ betumi ama nsonsonoe a ɛwɔ brand no mu atu mpɔn na ama wɔanya nokware a wɔde aniwa hu a emu yɛ den sen stock design a ɛyɛ generic. Nkɔsoɔ taa hwehwɛ sɛ vector adwini a wɔapene so, mfiridwuma mu nhwehwɛmu, hologram mfitiaseɛ anaa mastering, nhwɛsoɔ a wɔpene so, ne production controls a wɔapene so.
Holographic effects a egyina anim so ma wonya ade bi a wotumi hu a ebetumi aboa wɔn a wɔwɔ kaad, ahobammɔ adwumayɛfo, anaa adwumayɛfo ma wɔahu kaad nhyehyɛe a wɔapene so na wɔahu nsonsonoe a ɛda mfitiase mfonini a wɔatintim no ntam.
Rainbow, kinetic ne amanne holographic nsunsuanso ma premium visual finish a ɛfata titiriw ma VIP, akyɛde, nokwaredi, asɔremma, ahɔhoyɛ ne promotional card nhyehyɛe.
Sɛ holographic PVC overlay no yɛ laminated card no akyi fã a, ɛtetew mfonini a wɔatintim a ɛwɔ ase no mu fi nsateaa, sika kotoku ne sɛnea wɔde di dwuma daa wɔ soro no ho tẽẽ.
Amanneɛbɔ ahyɛnsodeɛ, din ne branded optical features ma holographic overlay no yɛ card no visual identity no fã mmom sen sɛ ɛbɛyɛ adwuma sɛ generic protective surface nko ara.
Wobetumi de krataa-form holographic PVC overlay a ɛfata ahyɛ adwumayɛfo card-lamination adwumayɛ mu aka PVC core nkratafa a wɔatintim ne dwumadi layers afoforo a ɛne no hyia ho.
Holographic overlay betumi ama ɔhaw a ɛwɔ aniwa so mfoniniyɛ a ɛnyɛ den mu no ayɛ kɛse, nanso ɛnsɛ sɛ wɔkyerɛkyerɛ mu ara kwa sɛ 'tamper-proof' anaa 'impossible to counterfeit.' Ahobammɔ kɛse adansedi nkrataa taa ka ahobammɔ layers ahorow pii a ɛde ne ho bom.
| Ahobammɔ Layer | Dwumadi |
|---|---|
| Hologram a Wɔayɛ no Amanneɛbɔ | Ɛma angle-dependent visual authentication a wɔde controlled optical artwork di dwuma |
| Microtext / Ntrɛwmu a Ɛyɛ Fɛ | Ɔde nneɛma a ɛyɛ fɛ a ɛyɛ den sɛ wɔbɛsan ayɛ no pɛpɛɛpɛ ka ho |
| UV Nkyerɛwee | Ɛma mfonini ahorow a ahintaw anaa nea ahintaw fã bi a wotumi hu wɔ UV hann a ɛfata ase |
| Data a Ɛsakra | Fa adansedi krataa biara bata onipa soronko bi, kaad nɔma anaa kyerɛwtohɔ a wɔde mae ho |
| RFID / Nkitahodi Chip | Boa ɛlɛtrɔnik ahotoso ne application-specific credential functions |
| Backend Nhwehwɛmu | Si so dua sɛ adansedi krataa no yɛ nokware wɔ database anaa nhyehyɛe a wɔama ho kwan so |
Mpɛn pii no, plastic card a wɔde laminated ayɛ a ɛyɛ adwumaden no kura nneɛma pii a ɛyɛ adwuma sen sɛ ɛbɛyɛ krataa a ɛyɛ den biako. Enti ɛsɛ sɛ wɔpaw holographic overlay sɛ kaad a wɔasisi no nyinaa no fã.
| Layer | Typical Function | Nhwehwɛmu a ɛho hia |
|---|---|---|
| Anim Holographic Overlay a Wɔde Kata So | Optical nkɛntɛnso ne anim printed-surface ahobammɔ | Pattern orientation, transparency, ne kɛse ne bonding afã |
| Anim a Wɔatintim Core | Adwini, branding, cardholder data akyi ne mfonini ahorow | Ink adhesion, drying ne hologram a wotumi hu |
| Mfinimfini Core / RFID Inlay | Ɔkyekye thickness anaasɛ ɛkura chip ne antenna | Thickness, registration ne RF adwumayɛ |
| Akyi a Wɔatintim Core | Akyi adwini, nɔma, akwankyerɛ anaa branding | Print ne lamination a ɛne ne ho hyia |
| Akyi Nneɛma a Wɔde Kata So | Akyi ahobammɔ ne nhyehyɛe a ɛkari pɛ | Thickness ne card-stack kari pɛ |
Ɛnyɛ bere nyinaa na holographic a wɔde kata so kɛse no ye. Nneɛma a wɔde aniwa hu a ɛyɛ den betumi ne nsɛm a ɛho hia a wɔatintim anaa mfiri a wotumi kenkan no asi akan wɔ aniwa so.
Nyankontɔn a emu yɛ den a ɛba mfonini bi so tẽẽ no betumi atew anim a wotumi hu no so. Enti ɛsɛ sɛ nnipa a wɔde wɔn ho hyɛ mu ho mfonini ahorow sɔ hologram ankasa no hwɛ sen mfonini ahorow a wɔayɛ ama obiara a ɛyɛ ananmusifo.
Holographic elements a ɛma hann anaasɛ ɛyɛ density kɛse betumi asiw optical scanning kwan wɔ tebea horow bi mu. Holographic nhyehyɛe ahorow a wɔakyerɛw din betumi de beae a emu da hɔ anaasɛ ɛnyɛ den pii asie wɔ QR code ne barcode ahorow ho.
Ɛsɛ sɛ kaad nhyehyɛe a contact-chip modules wom no kyerɛkyerɛ mu sɛ ebia holographic feature no ba awiei ansa na module beae no aba anaasɛ wɔyɛ overlay no ho adwuma ansa na wɔde chip milling ne embedding ahyɛ mu.
Ɛsɛ sɛ wɔde magnetic stripes, signature panels ne post-lamination functional coatings biara yɛ biako.
Standard non-metallic PVC overlay betumi ne RFID ne NFC card structures ahyia, nanso ɛsɛ sɛ wɔsɔ card a wɔawie no hwɛ bere nyinaa sɛ RF nhyehyɛe a edi mũ.
Sɛ holographic adansi no ka metallized anaa electrically conductive layers ho a, antenna adwumayɛ betumi asesa a egyina frequency, kwan a ɛda antenna no ntam, metallic coverage, pattern design ne card stack nyinaa so.
Wɔ contactless card projects ho no, susuw holographic overlay a wɔapaw no bom ne chip ankasa, antenna, akenkanfo, inlay gyinabea, card nneɛma, printing ne finished-card thickness.
Custom holographic overlays betumi ama nokwaredi ho sɛnkyerɛnne a wotumi hu ne soro ahobammɔ ama adwumayɛfo, ahyehyɛde ne identity-card nhyehyɛe ahorow a wɔahyɛ so. Ɛsɛ sɛ ahobammɔ ho adansedi nkrataa a ɛkorɔn ka hologram no ne ahobammɔ nneɛma afoforo a ɛde ne ho bom.
Holographic elements betumi aboa aniwa nsonsonoe anaa nokwaredi wɔ sikasɛm-kaad nnwuma mu baabi a mfiridwuma ne nhyehyɛe ho nkyerɛkyerɛmu ma ho kwan. Ɛsɛ sɛ wɔde nneɛma a etwa to no tom sɛnea wɔhwehwɛ sɛ wɔyɛ kaad ne nhyehyɛe no mu ahwehwɛde ahorow a ɛfata.
Rainbow holographic surfaces betumi ama aniwa so nkɛntɛnso ne bo a wosusuw sɛ ɛwɔ nokwaredi nkrataa a ɛyɛ fɛ, akyɛde nkrataa, anigyede nkrataa, asɔremma nhyehyɛe ahorow a ɛyɛ fɛ ne nsɛm a wɔde hyɛ nkurɔfo nkuran a wɔayɛ no kakraa bi so no ayɛ kɛse.
Adwumakuw ahyɛnsode anaa holographic nsusuwso a wɔayɛ no sɛnea wɔpɛ betumi aboa ahobammɔ akuw ma wɔde wɔn ani ahu adwumayɛfo adansedi nkrataa a wɔama wɔn tumi bere a wɔboa adwumakuw no ahyɛnsode a ɛkɔ so daa no.
Ahɔhodan ne ahomegyebea betumi de holographic overlay adi dwuma ama premium key cards, VIP programs ne branded RFID hotel cards bere a wɔahyɛ akenkanfo ne inlay a ɛne ne ho hyia no so dua akyi.
Asuafoɔ adansedie tumi de holographic visual authentication ne mfonini, barcode, QR code, magnetic stripes anaa contactless dwumadie abom.
Nneɛma a edidi so yi gyina mfitiase nneɛma ho nsɛm so. Wɔ production orders, ɛsɛ sɛ wosi specification a etwa to no so dua sɛnea pɛpɛɛpɛ overlay grade, card substrate, lamination afiri ne finished-card nhyehyɛe.
| Agyapadeɛ | Mfitiaseɛ Nkyerɛkyerɛmu | B2B Adetɔfoɔ Nkyerɛaseɛ |
|---|---|---|
| Atadeɛ | PVC a wɔde yɛ adwuma | Si so dua sɛ krataa-form PVC nkataso sen PET foil, printa laminate anaa holographic core krataa |
| Nneɛma a ɛyɛ den | 0.04–0.08 mm, wotumi sesa no sɛnea wɔpɛ | Bu anim ne akyi overlay thickness sɛ target finished-card thickness fã |
| Standard Size a Wɔde Di Dwuma | 310 × 480 mm anaasɛ wɔayɛ no sɛnea wɔpɛ | Match tintim nhyehyɛe, lamination mprɛte ne punching nhyehyɛe |
| Holographic Nhwɛso a Wɔde Yɛ Adwuma | Rainbow diffraction / amanne kwan so nsusuwii ahorow | Si stock anaa amanne so dua, kɔ so anaasɛ wɔakyerɛw din, akwankyerɛ na san yɛ bio |
| Bonding Temperature a Ɛyɛ Fɛ | 130–150°C na ɛwɔ hɔ | Fa di dwuma sɛ nea wofi ase gyina so; validate ne pɛpɛɛpɛ overlay, ink, core ne lamination press |
| Lamination Bere | 15–25 na ɛyɛ sikani | Ankasa ɔhyew / tena / onwini kyinhyia gyina afiri ne full card stack |
| Nsɛm a ɛne ne ho hyia | PVC, PETG ne ABS kaad nhyehyɛe a wɔakyerɛw wɔ mfitiase nkyerɛkyerɛmu mu | Bonding ne finished-card sɔhwɛ ahorow a wɔhwehwɛ ma nhyehyɛe pɔtee biara |
| Wie | Glossy / holographic a ɛyɛ fɛ | Kyerɛkyerɛ gloss, transparency, hologram density ne surface quality ahwehwɛde ahorow mu |
| MOQ | Mfitiase kratafa no kyerɛw nkratafa 1,000 | Ebia hologram mfiase a wɔahyɛ da ayɛ no behia MOQ soronko; denam nsɛm a wɔafa aka so si so dua |
Bu anim a wɔde kata so, anim a wɔatintim, emu ntini anaa RFID a wɔde ahyɛ mu, akyi a wɔatintim ne akyi nkataso no ho akontaa sɛnea ɛbɛyɛ a kaad a wɔawie no bedu ne kɛse a wɔhwehwɛ no ho.
Si so dua sɛ ebia ade a wɔde kata so no wɔ ɔfã bi a wɔakyerɛ sɛ wɔde akata so anaasɛ ɛbɛkyekyere. Sɛ wɔankyerɛ baabi a ɛnteɛ a, ebetumi ama lamination ayɛ mmerɛw anaasɛ ɔfasu a ɛnyɛ papa.
Hyɛ krataa akwankyerɛ, kaad kwankyerɛ ne hologram akwankyerɛ agyirae ansa na woaboaboa ano. Sɛ wopɛ holograms a wɔakyerɛw anaa logo a, si X/Y gyinabea no so dua wɔ adwinni a wɔatintim ne punching nhyehyɛe no ho.
Residual solvent, ink a wɔansa anaasɛ ink a ɛkata so dodo betumi aka adhesion na ama bubbles anaa aniwa mu sintɔ aba wɔ lamination akyi.
Fa registration holes, pins, marks anaa jigs di dwuma de hwɛ abusuabɔ a ɛda adwini a wɔatintim, holographic pattern, antenna, chip ne card-punching gyinabea ntam.
Fa supplier no kamfo tebea horow di dwuma sɛ mfiase parameters na afei optimize ɔhyew, nhyɛso, ɔhyew bere, mprɛte nhyehyɛe ne onwini sɛnea ankasa production mfiri.
Controlled cooling boa ma bonding, card thickness ne flatness gyina ansa na wɔayi laminated krataa no na wɔabɔ no.
Hwɛ hologram orientation, registration, bubbles, haze, scratches, bonding, card thickness, flatness, edge quality, barcode akenkan ne ɛlɛtrɔnik dwumadie wɔ baabi a ɛfata.
| Ɔhaw | a Ebetumi De Ba | Nea Ɛsɛ sɛ Wohwɛ |
|---|---|---|
| Bubbles a ɛyɛ hu | Residual solvent, mfutuma, mframa a wɔakyere anaasɛ layer contact a enye | Ink ayaresa, ahotew, nhyɛso ne stack ahosiesie |
| Delamination a wɔde di dwuma | Wrong coating side anaasɛ ɔhyew/nhyɛso a ɛmfata | Overlay grade, bonding afã ne lamination parameters |
| Hologram a Wɔkyerɛw Wɔn din wɔ ɔkwan a ɛnteɛ so | Krataa a wɔmfa nhyehyɛ mu a ɛnteɛ anaasɛ nhwɛsode a wɔsan yɛ bio | X/Y dinkyerɛw, kaad no nnyigyei ne punching alignment |
| Kaad Warpage a Wɔde Di Dwuma | Layer thickness a ɛnkari pɛ anaasɛ onwini | Anim/akyi nhyehyɛe, ɔhyew kyinhyia ne onwini kwan |
| Hologram Ɛte sɛ nea Ɛyɛ Mmerewa | Kanea, adwinni akyi anaasɛ optical nhwɛso paw | Hwɛ wɔ kaad adwini ankasa ne mmeae pii a wobɛhwɛ ase |
| QR Code a Ɛyɛ Den sɛ wobɛ Scan | Hologram a ɛyɛ den a ɛma wohu ade wɔ koodu so | Beae a emu da hɔ, nhwɛsode density ne wie-kaad scanner sɔhwɛ |
Ɛsɛ sɛ overlay thickness kɔ so tra tolerance a wɔapene so no mu efisɛ anim ne akyi layers nyinaa boa ma card gauge a etwa to no ba.
Hwɛ nyankontɔn ahoɔden, nhwɛsoɔ a ɛkɔ so, nneɛma a ɛyera, sintɔ, kwan a wɔsan yɛ ne akwankyerɛ a ɛne master sample a wɔapene so no hyia.
Ɛsɛ sɛ wɔhwɛ hologram ahorow a wɔakyerɛw din wɔ X/Y abodwokyɛre a wɔapene so ne gyinabea a etwa to a wɔde bɔ kaad no.
Fa card stack a edi mũ ne production-representative lamination tebea horow no susuw adhesion ho sen sɛ wobɛsɔ raw overlay no nkutoo ahwɛ.
Ɛsɛ sɛ wɔsɔ kaad a wɔhwɛ kwan sɛ ɛbɛkɔ so ayɛ adwuma bere tenten no hwɛ sɛ ebia ananmusifo sika kotoku no asɛe, wɔde petepete, nnuru a wɔde tew nneɛma ho, nsu ne tebea afoforo a ɛfa dwumadie pɔtee bi ho anaa.
Baabi a ɛfata no, sɔ QR codes, barcodes, magnetic stripes, contact chips, RFID/NFC adwumayɛ, personalization ne dwumadie nneɛma foforɔ biara hwɛ wɔ lamination a ɛtwa toɔ akyi.
VIP kaad a wɔde asiesie no nhia holographic nhyehyɛe koro no ara te sɛ adwumayɛfo adansedi krataa a wɔahyɛ so. Kyerɛkyerɛ sɛ ebia sɛnea ɛte, nokwaredi, sɛnea ɛtra hɔ kyɛ anaa botae ahorow a wɔaka abom ho hia sen biara.
Stock nhyehyɛe betumi atew nkɔso adwuma so, bere a custom designs ma brand identity a emu yɛ den ne visual authentication a wɔahyɛ so kɛse.
Fa holographic nhyehyɛe ahorow a ɛkɔ so di dwuma wɔ baabi a ɛho nhia sɛ wode besi hɔ pɛpɛɛpɛ. Paw nsusuwii ahorow a wɔakyerɛw din wɔ baabi a ɛsɛ sɛ ahyɛnsode, nsɔano anaa ahobammɔ ade bi pue wɔ beae a wɔakyerɛkyerɛ mu wɔ kaad biara so.
Bu overlay thickness bom ne printed core sheets, emu layers ne RFID inlays na ama woanya finished-card thickness a wɔhwehwɛ.
Kyerɛ mfonini, QR koodu, barcode, chips, nsaano nkyerɛwee, kaad nɔma ne mmeae afoforo a holographic density a ɛboro so betumi aka akenkan anaa dwumadie.
Ɛsɛ sɛ wɔde pene a etwa to no gyina kaad a wɔde laminated ayɛ ankasa so sen sɛ wobegyina holographic krataa a wɔmfa nhyehyɛ mu no nkutoo so.
Wɔawie kaad a wɔde di dwuma.
Kaad substrate: PVC, PETG, ABS anaa nhyehyɛe foforo a wɔapene so.
Ɛho hia sɛ wɔkata so kɛse.
Krataa no nsusuwii.
Kaad nhyehyɛe, te sɛ kaad dodow a ɛwɔ krataa biara mu.
Stock anaa amanne kwan so holographic nhwɛso.
Hologram ahwehwɛde a ɛkɔ so anaasɛ wɔakyerɛw din.
Custom logo anaa adwinni a ɛwɔ vector format mu.
Pattern akwankyerɛ ne ahwehwɛde a wɔsan yɛ.
Wɔhwehwɛ sɛ wɔde mmeae a emu da hɔ ma mfonini, QR koodu, chip anaa barcode.
Printing nhyehyɛe ne ink type.
Lamination mfiri ne mprempren nhyehyɛe parameters.
Target wie-kaad no mu duru.
RFID/NFC anaa contact-chip nhyehyɛe.
Ɛho hia sɛ wɔyɛ abrasion, moisture anaa sɔhwɛ afoforo a ɛkyerɛ sɛnea ɛtra hɔ kyɛ.
Nhwɛso dodow ne akontaabu dodow a wɔkra dodow.
Nneɛma a wɔde kyekyere nneɛma, nkyerɛwde ne OEM ahwehwɛde ahorow.
Munsusuw Wo Holographic Card Dwumadi no ho
Wontumi nsusuw holographic sini ahorow ho pɛpɛɛpɛ mfi kɔmputa mfonini nkutoo mu efisɛ sɛnea ɛte no gyina baabi a wɔhwɛ, hann fibea, akyi a wɔatintim, nhwɛsode a ɛyɛ den, kaad no ani ne lamination su so.
Wɔ nnwuma foforo mu no, ɔkwan a wotumi de ho to so sen biara a wɔfa so pene so ne sɛ wɔbɛyɛ ananmusifo a wɔawie kaad a wɔde adwinni ankasa, holographic overlay, card core, lamination process ne functional components bedi dwuma.
Hwɛ nyankontɔn ne kinetic optical effects wɔ kanea tebea horow pii mu.
Hwɛ sɛnea logo ne nhwɛsode kyerɛ no yiye.
Si hologram gyinabea a wɔakyerɛw din no so dua.
Hwɛ sɛnea mfonini, nsɛm, barcode ne QR-code hu.
Hwɛ lamination bonding ne bubbles.
Sua kaad a wɔawie no mu duru ne sɛnea ɛyɛ tratraa.
Sɔ RFID, NFC, contact chip anaa magnetic stripe hwɛ wɔ baabi a ɛfata.
Pene sika kɔkɔɔ nhwɛsode so ma wɔmfa nkyerɛ sɛnea wɔyɛ no kɛse.
Holographic PVC nyankontɔn film overlay betumi aka printed-surface ahobammɔ ne soronko angle-dependent visual effects ama ID, kwan, asɔremma, akyɛde, VIP, ahɔhodan, sikasɛm-fam ne smart-card applications.
Nyankontɔn nsusuwso a wɔahyɛ da ayɛ no fata yiye ma afɛfɛde ne aguadi nkrataa, bere a hologram ahorow a wɔayɛ no sɛnea wɔpɛ na wɔakyerɛw din no ma wotumi di ahyɛnsode no din ne nea wɔde aniwa hu so.
Wɔ nnwuma a ɛfa ahobanbɔ ho no, ɛsɛ sɛ wɔde holographic overlay ka honam fam, ankorankoro anaa ɛlɛtrɔnik ahobammɔ mfiridwuma afoforo ho sen sɛ wɔbɛfa no sɛ ano aduru a egyina hɔ ma a ɛko tia atoro.
B2B adetɔ kwan a wotumi de ho to so sen biara ne sɛ wɔbɛkyerɛkyerɛ kaad adansi a edi mũ no mu, apaw holographic type a ɛfata, asi ne kɛse ne ne din a wɔakyerɛw so dua, asɔ lamination ahwɛ, asɔ kaad no dwumadi ahwɛ na wɔapene kaad nhwɛso a wɔawie so ansa na wɔayɛ no pii.
Bisa Holographic PVC Overlay Bo a Wɔbɔ
Ɛyɛ PVC card-lamination ade a ɛyɛ tratraa a ɛyɛ mmerɛw anaasɛ ɛyɛ fã bi a ɛda adi a ɛwɔ diffractive optical structure a ɛma nyankontɔn anaasɛ amanne holographic nsunsuanso bere a wofi afã horow hwɛ no.
Wɔde di dwuma sɛ abɔnten so ade wɔ laminated plastic cards mu de yɛ holographic visual effects, ɛboa ma wɔbɔ mfonini ahorow a wɔatintim a ɛwɔ ase no ho ban na ɛma aniwa so ahotoso a wobetumi apaw.
Dabi, holographic overlay taa yɛ akyi fã a ɛyɛ tratraa a ɛyɛ mmerɛw, bere a holographic PVC core sheet yɛ structure anaa decorative layer a ɛyɛ den wɔ card nipadua no mu.
Ɛnyɛ nea ɛho hia ankasa. Wɔde krataa-form PVC overlay ka ho bere a mfiridwuma kaad lamination. Wɔtaa de printa overlaminate ma wɔ roll format mu na wɔde di dwuma wɔ card a wɔayɛ ama obi dedaw so denam card-printer lamination module a ɛne no hyia so.
Hologram ahorow a ɛkɔ so yɛ no mpɛn pii wɔ sini no nyinaa mu a enhia sɛ wɔde beae pɔtee bi si kaad biara so. Wɔde hologram ahorow a wɔakyerɛw din no si coordinates a wɔakyerɛkyerɛ mu ma enti ade koro no ara pue wɔ beae koro wɔ card biara a wɔawie so.
Aane. Holographic nhyehyɛe a wɔahyɛ da ayɛ no betumi de ahyɛnsode, nsɛm, adwumakuw din, agyiraehyɛde, geometric nhyehyɛe, kankyee nsunsuanso anaa adwuma pɔtee bi a ɛma wohu nneɛma foforo aka ho, a egyina adwinni ne adwini mu nhwehwɛmu so.
Mpɛn pii no, hologram a wɔahyɛ da ayɛ a wɔahyɛ da ayɛ no ma aniwa so ahotoso a emu yɛ den sen generic nhwɛso a ɛwɔ hɔ kɛse efisɛ ebetumi de adwinni a ɛyɛ ne de ne nneɛma a wɔde hwɛ adwuma pɔtee bi aka ho. Credential ahobanbɔ a edi mũ da so ara gyina ahobammɔ layers foforo ne issuance controls so.
Dabi, holographic nneɛma betumi ama aniwa so ahotoso akɔ soro na ama mfonini a ɛnyɛ den ayɛ den, nanso ɛsɛ sɛ kaad a ahobammɔ kɛse wom ka ahobammɔ mfiridwuma ahorow pii a ɛde ne ho bom.
Mfitiaseɛ nneɛma ho nsɛm no kyerɛw 0.04–0.08 mm a ɛwɔ akwan a wɔahyɛ da ayɛ. Ɛsɛ sɛ wɔbu ne kɛseɛ a ɛfata no bom ne anim ne akyi kaad layers ne target finished-card thickness.
Mfitiaseɛ nkyerɛkyerɛmu no kyerɛ 310 × 480 mm ne akɛseɛ a wɔahyɛ da ayɛ. Ɛsɛ sɛ krataa no kwan a wɔhwehwɛ no ne tintim nhyehyɛe, lamination mprɛte ne punching nhyehyɛe hyia.
Kratafa a edi kan no kyerɛw bɛyɛ 130–150°C. Ɛsɛ sɛ wɔfa eyi sɛ nea wɔde fi ase sen sɛ wɔde bɛyɛ amansan nyinaa nhyehyɛe efisɛ ɔhyew a ɛfata no gyina nea wɔde kata so pɛpɛɛpɛ, nea ɛwɔ mu, ink, nea wɔde mia, nhyɛso, bere a wɔde tra hɔ ne onwini kyinhyia so.
Ebetumi akata mmara a wɔatintim no so honam fam, nanso aniwa a ɛma hann a emu yɛ den no betumi atew scan ahotoso so wɔ kanea tebea horow bi mu. Wɔkamfo kyerɛ sɛ wɔmfa beae a emu da hɔ anaasɛ ɛnyɛ den pii nkɔ bere a ɛho hia sɛ wɔyɛ scan a wotumi de ho to so no.
Yiw, wobetumi de nkataso a ɛfata ahyɛ RFID ne NFC kaad nhyehyɛe mu. Sɛ optical film no kura dade anaasɛ conductive layers a, finished-card RF sɔhwɛ ho hia titiriw.
Sɛ ɛyɛ kaad no akyi a, nea wɔde kata so no betumi abɔ nhoma tintim a ɛwɔ ase no ho ban afi nea wɔde bedi dwuma tẽẽ ne nea wɔde petepete so no ho. Ankasa kaad a ɛtra hɔ kyɛ gyina overlay grade, bonding, thickness, card nhyehyɛe a edi mũ ne dwuma a atwa yɛn ho ahyia.
Dabi, overlay grade ahorow ma abrasion ne scratch resistance ahorow. Ɛsɛ sɛ adetɔfo a wɔhwehwɛ sɛ wɔyɛ adwuma pɔtee bi no kyerɛkyerɛ sɔhwɛ kwan a ɛfata mu na wɔsɔ nkrataa a wɔawie no hwɛ.
Mfitiaseɛ adeɛ ho nsɛm no kyerɛ PVC, PETG ne ABS a ɛne ne ho hyia, nanso bonding adwumayɛ gyina nneɛma no grades pɔtee ne card structure so. Wɔkamfo kyerɛ sɛ wɔnyɛ finished-card lamination sɔhwɛ ansa na wɔayɛ no pii.
Fa kaad dwumadie, substrate, overlay thickness, krataa kɛseɛ, card nhyehyeɛ, stock anaa amanne hologram ahwehwɛdeɛ, kɔ so anaa wɔakyerɛw din nhwɛsoɔ, adwini, clear zones, tintim kwan, lamination tebea, RFID ahwehwɛdeɛ, sample dodoɔ ne hwɛ kwan sɛ bulk volume ma.
Aane. Ɛsɛ sɛ wɔsɔ nhwɛsoɔ kaad hwɛ holographic hwɛbea, nhwɛsoɔ gyinabea, adwini a wɔhunu, bonding, bubbles, card thickness, flatness, abrasion ne ɛlɛtrɔnik anaa mfiri a ɛtumi kenkan dwumadie biara a ɛhia.
