UV -Kɔnɔna lakananen Plaque polycarbonate | Tile yeelen so sanfɛlan caman kogow

UV -Kogo caman lakananen Plaque polycarbonate s ka ɲɛsin So sanfɛla ni seriw ma

Wallis UV -protected hollow polycarbonate sheet ye panneau multifall glazing ye min ka nɔgɔn, min dilannen don seri so sanfɛlanw, sanfɛlanw, pergolaw, mobilibonw, canopies, taama siraw, sow jɔli ani izini tile yeelen porozɛw kama.

So kɔnɔna kɔnɔna jɔcogo bɛ yeelenbɔcogo dafalen ni funteni-sɔrɔcogo ɲɛnabɔlen fara ɲɔgɔn kan ni i y’a suma ni sɛbɛnfura gɛlɛn kelen ye. Wallis bɛ kogo fila, kogo saba, kogo naani, misiwolo, misiwolo duuru ani X-structure polikarbonati panɛriw dilan minnu janya bɛ daminɛ milimɛtɛrɛ 4–30 ɲɔgɔn na ka kɛɲɛ ni jɔcogo ye , ni u bonya bɛ se milimɛtɛrɛ 2100 ma.

UV -lakanalan min bɛ bɔ ɲɔgɔn fɛ, o bɛ dɛmɛ ka polikarbonati lakana tile tiɲɛni kuntaalajan na. Kulɛri jɛlenw, opal, bɔrɔnzɛ, bulu, jɛman ani ladamu kulɛri wɛrɛw bɛ sɔrɔ B2B so sanfɛlan, seri ani fɛn dilanni porozɛw kama.

Multiwall Plaque polycarbonate Fɛɛrɛko ɲɛfɔli

Kɔlɔsili: U-value, yeelenbɔcogo, sɛbɛnfura girinya, doni seko, a kɔrɔta hakɛ fitinin ani dɛmɛn yɔrɔ min bɛ se ka kɛ, o bɛ danfara ka kɛɲɛ ni kogo jɔcogo ye, a bonya ani a girinya. Porozɛ laban nafaw ka kan ka dafa ka bɔ fɛɛrɛko kunnafonidilan na min bɛ kɛ ka ɲɛsin labɛncogo sugandilen ma.

Polikarbonati jɔcogo, u bonya ani u bonya minnu bɛ sɔrɔ

Kogo jɔcogo bɛ insulasi, panɛri girinya, a gɛlɛya ani yeelen bɔli dantigɛ. Tablo nata bɛ Wallis ka fɛn dilannenw mara minnu tɔgɔ sɛbɛnna sisan. Nin ɲɛ in bɛ ɲɛsin fɔlɔ so sanfɛlanw ni kogo caman ma, k’a sɔrɔ u ni ɲɔgɔn cɛ dilancogo gɛlɛnw, jirisunw ani u datugulanw fana jiralen don sannikɛlaw ye minnu bɛ PC sɛbɛn suguya caman sɔrɔ.

Plaque polycarbonate Jatebɔ Sugandili

Polikarbonati min bɛ kogo caman na, o bɛ funteni kunbɛncogo ɲɛ cogo min na

Polikarbonati kogo caman bɛ baara kɛ ni kɔnɔna fiɲɛbɔyɔrɔw ye walasa ka funteni jiginni dɔgɔya panɛri fɛ. Ni dɔ farala kogow walima kɔnɔna jɔli layɛrɛw hakɛ kan, o bɛ se ka fɛnw tangacogo ɲɛ, hali ni baara kɛcogo fana bɛ bɔ sɛbɛnw janya la, u jateminɛcogo la ani u yɔrɔ girinya la.

U-Value kɔrɔ ye mun ye?

U-value bɛ funteni jiginni suman boon yɔrɔ dɔ fɛ. U -value min ka dɔgɔn o kɔrɔ ye ko funteni bɛrɛbɛrɛ ka fisa . Wallis bɛ 3,9 W/m²·K ɲɔgɔn jate sisan 4mm cogoya sugandilenw na ani 2,3 W/m²·K ɲɔgɔnna 16mm cogoya sugandilenw na.

Ikomi sɛbɛn fila minnu janya ye kelen ye, olu bɛ se ka baara kɛ ni kogo jɔcogo ni fɛnw girinya danfaralenw ye, sannikɛlaw ka kan ka U-value kɛrɛnkɛrɛnnen suma fɛn tigitigi la sanni u ka sugandi ka kɛɲɛ ni u bonya dɔrɔn ye.

Twin Wall vs Triple Wall vs X-Structure ka ɲɔgɔn sɔrɔ

Kogo fila-fila sɛbɛnw bɛ sɔrɔko balansi di kɛnɛyako, girinya ani fɛnw tangacogo ma, ka ɲɛsin jirisunw ma ani so sanfɛlan misɛnninw ma. Kogo saba ni kogo naani dilanni bɛ kɔnɔna layɛrɛw fara ɲɔgɔn kan walasa ka dɔ fara insulasi ni gɛlɛya kan, ka sɔrɔ X-structure finman ni layɛrɛ caman dilancogo bɛnnen don kosɛbɛ porozɛw ma minnu bɛ funteni baarakɛcogo barikama wajibiya ani panɛli gɛlɛya ka bon.

Nafa jɔnjɔnw UV -Kɔnɔna lakananen Plaque polycarbonate

Natural Light Transmission (yeelenbɔcogo nafama).

Ka kɛɲɛ ni a janya, kogo jɔcogo ani a kulɛri ye, Wallis bɛ yeelenbɔcogo 60–80% ɲɔgɔn jate sisan. Panɛri jɛlenw bɛ sugandi tuma caman na yɔrɔ minnu na tile yeelen caman ka kan ka kɛ yɔrɔ minnu na, k’a sɔrɔ opal, bronze ani sɛbɛn kulɛrilenw bɛ se ka dɔ bɔ yeelenbɔ walima tile yeelen na.

Co-Extruded UV Lakanali

UV -resistant surface layer min bɛ bɔ ɲɔgɔn fɛ, o dabɔra fɔlɔ walasa ka polikarbonati yɛrɛ lakana tile tiɲɛni kuntaalajan na, o bɛ dɛmɛ ka dɔ bɔ jɛman na ani ka masin baarakɛcogo bɔnɛ kɛnɛma baara kɛtuma na.

Kɔrɔbɔliba min bɛ kɛ ni nɔ bilali ye

Polikarɔbɔnati bɛ se ka fɛn caman kɛ ni i y’a suma ni galasifɛnw ye minnu bɛ se ka tiɲɛ, o bɛ kɛ sababu ye ka kogo caman panɛriw kɛ minnu bɛnnen don so sanfɛlanw, sanfɛlanw ani sɛnɛfɛnw dilanni na yɔrɔ minnu na fiɲɛ bɛ fiɲɛ bila yɔrɔ minnu na walima sanbɛlɛ bɛ se ka kɛ haminanko ye. Porozɛ kɛrɛnkɛrɛnnenw ka sanbɛlɛ walima nɔ bilali wajibiyalenw ka kan ka dafa ka kɛɲɛ ni sɛbɛnfura hakɛ sugandilenw ni sɛgɛsɛgɛli kunnafoniw ye.

So sanfɛlanw jɔcogo min ka nɔgɔn

Panɛriw bɛ baara kɛ ni kɔnɔna kɔkiliw ye sanni ka kɛ ni tigɛli ye min jɔlen don pewu, o bɛ dɛmɛ ka panɛri girinya dɔgɔya ka sɔrɔ ka jɔcogo jateminɛ. Panɛli girinya dɔgɔyali bɛ se ka taa ni a ta, a kɔrɔta ani a sigili nɔgɔya ni i y’a suma ni galasi girinmanw ye.

Kuwati baarakɛcogo ɲuman ɲɛnabɔli

Fiɲɛbɔyɔrɔ minnu datugulen don, olu bɛ dɔ bɔ funteni jiginni na min bɛ taa ni fɛnw ye, o bɛ kɛ sababu ye ka kogo caman PC kɛ tile yeelen nafama ye seriw, conservatoire ani so sanfɛlanw na, yeelen tali ni insulasi fila bɛɛ nafa ka bon yɔrɔ minnu na.

Kulɛriw ni jɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Kulɛriw ni kogow jɔcogo danfaralenw b’a to sannikɛlaw bɛ se ka tile yeelen, danbe, tile kɔlɔsili, cɛɲi, gɛlɛya ani fɛnw tangacogo bɛn ɲɔgɔn ma ka kɛɲɛ ni serili walima fɛn dilanni porozɛ kelen-kelen bɛɛ ye.

Polikarbonati caman bɛ se ka kɛ cogo min na

4–6mm Kogo filaninw

A bɛ jateminɛ tuma caman na ka ɲɛsin jirisunw ma minnu ka nɔgɔn, sigiyɔrɔ misɛnninw, tilayɔrɔw ani porozɛ minnu na, tile yeelen sɔrɔko nafa ka bon yɔrɔ minnu na ka tɛmɛ fɛnw tangacogo caman kan.

8–10mm Kogo fila walima saba

A bɛnnen don seri, canopy, pergola, skylight ani carport baara caman ma yɔrɔ minnu na sannikɛlaw mago bɛ balansi barikama na min bɛ kɛ ni rigidity, light transmission ani thermal insulation ye.

16–20mm Kogo caman bɛ yen

Kogo saba, kogo naani walima barikalan minnu ka bon, olu bɛnnen don kosɛbɛ porozɛw ma minnu bɛ fɛnw bila jɔyɔrɔ fɔlɔ la, minnu bɛ fɛnw tanga, minnu ka gɛlɛn kosɛbɛ walima minnu bɛ panɛri janya. Dɛmɛ labanw ni ɲɔgɔn cɛ bɛ bɔ hali bi sɛbɛnw girinya la, nɛnɛ doni, fiɲɛ doni ani u jɔcogo.

25–30mm X-Structure walima Panneau Multi-Layer

Layɛrɛ caman sigicogo barikamaw dabɔra porozɛw kama minnu bɛ insulasi ni gɛlɛya caman wajibiya. Sannikɛlaw ka kan ka U-value tigitigi, yɔrɔ girinya, doni tabali ani span ladilikan ɲini profil sugandilen na.

Serre Plaque polycarbonate Sugandili

Yeelen Lasecogo

Serre sanbagaw ka kan ka sɛbɛnw kulɛri ni u jɔcogo sugandi ka kɛɲɛ ni sɛnɛfɛnw yeelen ɲinini ye. Sɛbɛn jɛlenw bɛ tile yeelen yelen caya, ka sɔrɔ cogoya minnu bɛ jɛnsɛn walima minnu bɛ kɛ ni opal ye, olu bɛ se ka yeelen tilatilali nɔgɔlen di yɔrɔ minnu na a mago bɛ u la.

Insulation thermique (Sɔgɔlan min bɛ kɛ ni funteni ye).

A ka c’a la, nɛnɛ bɛ yɔrɔ minnu na ani jagokɛyɔrɔ minnu ka sumaya, olu bɛ nafa sɔrɔ U-values ​​dɔgɔyali la. Fɛɛrɛko kunnafoniw tigitigiw sumali milimɛtɛrɛ 8, milimɛtɛrɛ 10, milimɛtɛrɛ 16 ani kogo caman jɔli la, o nafa ka bon ka tɛmɛ janya dɔrɔn sumani kan.

Kondensasiyɔn Kɔrɔsili

Jagokɛyɔrɔw la, u bɛ se ka kɛ ni yɔrɔ ye min bɛ se ka jibɔ walima ka jibɔ kɛlɛ walasa ka dɔ bɔ jikuruw bɔli la ani ka jibɔcogo ɲɛ. Ni nin baara in wajibiyalen don, aw k’a ɲɛfɔ ɲininkali kɔnɔ walasa sɔrɔli ni baarakɛcogo ka se ka dafa Wallis ka kalasi sugandilen na.

UV -Fɛɛrɛ lakananen

Kɛrɛ kelen UV -lakanani panɛriw kama, taamasiyɛn kɛlen UV -lakana yɔrɔ ka kan ka ɲɛsin tile ma. Ni fan fila bɛɛ bɛ se ka tilebɔ tilennen sɔrɔ, aw bɛ ɲininkali kɛ ni fan fila UV cogoya bɛ sɔrɔ fɛn sugandilen in na.

Polikarbonati bɔgɔlan minnu bɛ so sanfɛ, olu kɛcogo

Serre Sow ni Sɛnɛ Glazing

Polikarɔbɔnati kogo caman bɛ tile yeelen ni funteni tangalan ni sɔgɔsɔgɔninjɛ kunbɛnni fara ɲɔgɔn kan, o b’a to a bɛ bɛn jagokɛyɔrɔw ma, nakɔsɛnɛyɔrɔw, denmarayɔrɔw jɔli ani sɛnɛko galasi porozɛ wɛrɛw.

Sanfɛlanw ani Tile yeelenbɔlanw

Panɛri minnu bɛ kogo caman na minnu bɛ yeelen bɔ walima minnu bɛ yeelen bɔ, olu bɛ se ka tile yeelen don fɛnmarayɔrɔw, atelierw, jagokɛyɔrɔw ani sigiyɔrɔw kɔnɔ ka sɔrɔ ka dɔ bɔ girinya la min bɛ tali kɛ laadala galasi la.

Pɛrgola, Patio ani Verandaw

Panɛri jɛlenw, nɛgɛ, opal ani kulɛrilenw bɛ se ka kɛ pergola ni kɛnɛma sigiyɔrɔ datugulenw na, waati lakanani ni tile yeelen fila bɛɛ ka kan ka kɛ yɔrɔ minnu na.

Canopies ani Taama sira datugulenw

Polikarbonati min ka nɔgɔn UV -lakana, o bɛ so sanfɛlan nafama di dondaw, taama siraw, garew, lakɔlisow ani jagokɛyɔrɔw ma.

Mobili jɔyɔrɔw

Kogo caman PC so sanfɛla bɛ se ka bolifɛnw tanga sanji ni waati tilennen ma ka sɔrɔ ka yeelen dabɔlen to ka don yɔrɔ datugulen na. Nɛgɛ, opal ani tile-kɔlɔsili kulɛriw bɛ se ka jateminɛ yɔrɔ minnu na yeelen ni funteni sɔrɔli ye haminankow ye.

Architectural Cladding ani Kɔnɔnafiliw

Panɛri PC kɔnɔna bɛ se ka kɛ fana ɲɛda jɛlenw na, kogow sigicogo ani masiriyɔrɔw la, yɔrɔ minnu na dilanbagaw mago bɛ boon yɔrɔ nɔgɔlenw na minnu bɛ yeelen bɔ.

Gafe min bɛ kɛ ka ɲɛsin polikarbonati sow jɔli ma ni kogo caman ye

UV -Kɛrɛ lakananen min ɲɛsinnen bɛ kɛnɛma, o sigi

Ni sɛbɛn sugandilen in bɛ ni UV lakanani ye fan kelen fɛ, aw bɛ UV -lakana ɲɛda min taamasiyɛn jɛlen don, o sigi tile fan fɛ. Aw kana filimu min bɛ mɔgɔ tanga, o bɔ fo ni panɛri ɲɛsincogo ka dafa.

Aw bɛ Hollow Channels boli ka taa So sanfɛla jiginni sira fɛ

A ka c’a la, kɔnɔna kɔkiliw ni jibolisiraw ka kan ka boli ka jɔ walima ka taa so sanfɛla binna sira fɛ walasa jibolisira minnu bɛ jibolisiraw kɔnɔ, olu ka se ka ji bɔ ni girinya ye sanni u ka siri.

Aw bɛ baara kɛ ni Correct End Sealing System ye

A ka ca a la, sɛbɛnfura sanfɛla bɛ datugu ni aliminiyɔmu kase ye min tɛ se ka don, ka sɔrɔ duguma dakun bɛ baara kɛ ni fiɲɛbɔlan ye min bɛ se ka fiɲɛ bila walima min bɛ ninakili la ani a laban cogoya. Dadoncogo tigitigi ka kan ka tugu so sanfɛla sugandilen kɔ walasa buguri, fɛnɲɛnamaw ani ji tɛmɛnen kana don kɔnɔna siraw la.

Aw bɛ So sanfɛyɔrɔ bɛnnen di

So sanfɛlan ka kan ka kɛ sababu ye ka sanji jibɔyɔrɔ dannamɔgɔ sɔrɔ ani kɔnɔna na jibɔyɔrɔ. Jiginni hakɛ fitinin tigitigi bɛ bɔ so sanfɛlan dafalen na; baarakɛlaw ka kogo caman sigicogo caman bɛ baara kɛ ni 5° ɲɔgɔn ye walima ka tɛmɛ o kan, k’a sɔrɔ sigida kɛrɛnkɛrɛnnen dɔw bɛ jiginniba de wajibiya. Aw bɛ tugu ɛntɛrinɛti ni sigicogo gafe la min bɛ kɛ ka ɲɛsin profil sugandilen ma.

Aw bɛ a to Thermal Expansion ka kɛ

Polikarbonati bɛ bonya ani ka dɔgɔya ni funteni bɛ Changé. Jɛɲɔgɔnya yɔrɔw, dingɛw labɛnni ani dawolo yɔrɔw ka kan ka sira di lamaga ma. Fɛnɲɛnɛmafagalanw man kan ka sɛbɛnfura siri kosɛbɛ fo funteni lamagacogo ka degun walima ka a siri.

Aw kana taama ka ɲɛ sɛbɛnfura kan

Ni aw bɛ a sigi ani ka a ladon, aw bɛ baara kɛ ni jirisunw ye minnu bɛnnen don, ni lada walima jirisunw ye minnu bɛ farikolo girinya tila-tila dɛmɛnan fɛ sanni aw ka jɔ k’a ɲɛsin kogo caman pankurunw kan minnu tɛ dɛmɛ.

Installation fili minnu ka teli ka kɛ, olu ka kan ka kɔlɔsi

• Fɛn kelen UV -lakanani sɛbɛn dɔ sigili a kunbere.

• Ka kanal dingɛw sigi ka ɲɛ walasa jisuma kana se ka ji bɔ.

• Aw bɛ a dakun fila bɛɛ datugu pewu ni fiɲɛbɔlan walima jibɔlan wajibiyalen tɛ.

• Aw bɛ baara kɛ ni silikɔni, nɔrɔlanw walima fɛnw ye minnu tɛ bɛn ɲɔgɔn ma.

• Aw bɛ sirilanw siri kojugu ani ka funteni lamagacogo bali.

• Baara kɛ ni so sanfɛla jiginni ye min tɛ se ka kɛ.

• Ka sira dafalenw to buguri, fɛnɲɛnamaw ani ji la.

• Ni aw ma se ka kɛnɛma lakanani filimu bɔ a sigili kɔfɛ.

• Baara kɛ ni dɛmɛn yɔrɔw ye minnu ma sɛgɛsɛgɛ sigida fiɲɛ walima nɛnɛ doniw la.

Polikarbonati min bɛ kɛ ni kogo caman ye vs Verre soit

Kulɛri sugandili ka ɲɛsin so sanfɛla ni seriw ma

Jɛman

Panɛri jɛlenw bɛ tile yeelen camanba di, wa u bɛ kɛ ka caya jirisunw, sanfɛlanw ani porozɛw kama, yɔrɔ minnu na yeelen dabɔlen de ye fɔlɔ ye.

Opal / Fini

Opal sɛbɛnw bɛ yeelen jɛnsɛnnen caman dilan ani ka ɲɛnayeli gundo di. A ka c’a la, u bɛ sugandi ka ɲɛsin jirisunw ma, sow jɔli tile yeelenw ani jagokɛlaw ka so sanfɛ.

Bronze ni Gris ye

Tintinti sɛbɛnw bɛ dɔ bɔ yeelen yelen na, wa u bɛ se ka kɛ sababu ye ka ɲɛnajɛyɔrɔ ye min bɛ sumaya kosɛbɛ kɛnɛbaw, pergola, mobili jɔyɔrɔw ani fɛn dilanni so sanfɛ.

Blu, Vert ani Custom Kulɛriw

Kogo caman sɛbɛnw kulɛrilenw bɛ se ka kɛ ka fɛn dilanni dilan, ka taamasiyɛnw kɛ ani ka so sanfɛla masiri. Kulɛriw ka kan ka sɔn ka sɔrɔ ka komandi caman kɛ yɔrɔ minnu na u yecogo nafa ka bon kosɛbɛ.

B2B Customization ka ɲɛsin So sanfɛla ni Serre porozɛw ma

• Kogo fila, kogo saba, kogo naani, misiwolo ani X-structure pannew

• Ladamuni janya ka kɛɲɛ ni sigicogo ye

• A bonya bɛ Se 2100mm ma

• Porozɛ janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• Konteyna-optimisé 5800 / 6000 / 11800 / 12000mm janya

• Kulɛri jɛlen, opal, bronze, bleu, vert ani custom

• UV -labɛnni lakananenw

• Porozɛ kɛrɛnkɛrɛnnenw ka yeelenbɔcogo

• OEM taamasiyɛnw ni pakew dilanni

• Misali jateminɛ

• Bulk distributor ani poroze sɔrɔli

Kunnafoni minnu ka kan ka sɔrɔ walasa ka kuma fɔcogo ɲuman sɔrɔ

• A kɛcogo: seri, sanfɛlan, canopy, pergola, carport walima façade

• Kogo jɔcogo wajibiyalen

• A janya wajibiyalen don

• A bonya ni a janya

• Hakɛ wajibiyalen bɛ m⊃2 la;

• Ɲɛ

• Laɲini yeelen jiginni

• Laɲini U-value, ni a ɲɛfɔra

• Fɛn kelen walima fan fila UV wajibiyalen

• Anti-condensation wajibiyalen, ni o bɛ se ka kɛ

• Porozɛ sigiyɔrɔ ani waati cogoya

• Fɔɲɔ ni nɛnɛ doni wajibiyalenw

• Dɛmɛn yɔrɔjan / ja jɔcogo

• Tasuma-jatebɔ wajibiyalen

• Foroko ni minɛnw doni wajibiyalenw

Sɛnɛfɛnw dilanni ni jogoɲini kɔlɔsili

Polikarbonati kogo caman baarakɛcogo basigilen bɛ bɔ extrusion jogo la, kɔkili jateminɛcogo la, kogo janya la, UV -layer consistency ani dimensional control la. Wallis bɛ dɛmɛ don jogoɲini na B2B so sanfɛlanw ni jirisunw dilancogo la.

• A bonya ni a bonya sɛgɛsɛgɛli

• Kogo ni kɔkili jɔcogo sɛgɛsɛgɛli

• UV -layɛrɛ sɛgɛsɛgɛli

• Yeelen jiginni sɛgɛsɛgɛli

• Kulɛriw ka ɲɔgɔndɛmɛ sɛgɛsɛgɛli

• Kɔnɔnafili-baarakɛcogo jateminɛ

• UV kɔrɔya jateminɛ

• Foroko ni minɛnw doni sɛgɛsɛgɛli

Wallis Plaque polycarbonate Baarakɛyɔrɔ

Mun na ka Polikarbonati caman sɔrɔ Wallis fɛ?

Fabrika-Based Supply (Sɔrɔli min bɛ kɛ izini na

Wallis bɛ extrusion, UV coating, cutting ani export supply di policarbonate sheet porozɛw ma, ka dɛmɛ don distributeurs, greenhouse builders ani so sanfɛla baarakɛlaw ma ni izini-sɛnɛko kumaɲɔgɔnya ye.

Polikarbonati (Polycarbonate) jɔcogo caman

Sannikɛlaw bɛ se ka kogo fila, kogo saba, kogo naani, misiwolo, X-structure ani a ɲɔgɔnnaw sɔrɔ PC fɛn gɛlɛnw walima sɔgɔlenw na porozɛw ka ɲininiw danfaralenw kama ka bɔ feerekɛla kelen fɛ.

OEM / ODM Ladamuni

A bonya, a jɔcogo, a kulɛri, a sɛbɛnfura hakɛ, a pakew ani a poroze kɛrɛnkɛrɛnnenw ɲɛfɔli bɛ se ka fɔ ka ɲɛsin jatebɔlaw ka porogaramuw ma ani jɔli porozɛw ma.

Konteyna-Optimized Export Janya

5800 / 6000 / 11800 / 12000mm janya minnu fɔra, olu bɛ se ka mɛtɛrɛ 20 ni mɛtɛrɛ 40 minɛnw baaracogo ɲɛ ani ka dɔ bɔ tigɛ kunntanw na so sanfɛla ni serili yamaruyaw kama.

Porozɛ ni sigili dɛmɛni

Sannikɛlaw bɛ se ka jɔli jaw di, so sanfɛlanw, waati kunnafoniw ani poroze wajibiyalenw walasa u janya, u jɔcogo ani u sɛbɛncogo bɛnnen ka se ka jateminɛ sani u ka komandi kɛ.

Sosiyete ka don o don baarakɛcogo

Kunnafoni minnu bɛ sɔrɔ kiliyanw fɛ

Ɲininkali minnu bɛ kɛ tuma caman na Multiwall Plaque polycarbonate s

Polikarbonati sɛbɛn min bɛ kogo caman na, o ye mun ye?

Polikarɔbɔnati kogo caman ye PC panɛli ye min bɛ bɔ kɛnɛma, kɔnɔna so kɔnɔna bɔgɔlenw bɛ min kɔnɔ, minnu bɛ fara ɲɔgɔn kan ni kɔkiliw ye. Fiɲɛ yɔrɔw bɛ dɔ bɔ funteni jiginni na ka sɔrɔ kɔkiliw bɛ jɔli dɛmɛ, o bɛ tile yeelenbɔlan nɔgɔman dɔ dilan walasa ka so sanfɛla ni galasi kɛ.

Wallis bɛ fɛn jumɛnw di?

Wallis ka sisan yɔrɔ bɛ se milimɛtɛrɛ 4–30 ɲɔgɔn ma dingɛ ni kogo caman jɔli kama . Kogo filaninw bɛ jate milimɛtɛrɛ 4–12, kogo saba bɛ milimɛtɛrɛ 8–16, kogo naani 8–20mm, misiwolo 6–11mm, misiwolo duuru-dakun 14–25mm ani X-structure 14–30mm.

A bonya hakɛ min ka bon kosɛbɛ, o ye mun ye?

Wallis ka bɔgɔdaga ni kogo caman jɔli kunbabaw bɛ jate sisan ni u bonya bɛ se milimɛtɛrɛ 2100 ma . Aw bɛ a jira ko a dilanni bonya tigitigi bɛ sɔrɔ profil sugandilen na sani aw ka komandi kɛ.

Janya jumɛnw bɛ sɔrɔ?

Janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ sɔrɔ. Wallis bɛ 5800, 6000, 11800 ani 12000mm laadi walasa ka minɛnw doni ka ɲɛ sen 20 ni sen 40.

Yeelen cicogo ye mun ye?

Wallis ɲɛ min bɛ yen sisan, o bɛ 60–80% ɲɔgɔn jate ka kɛɲɛ ni a bonya, kogo jɔcogo ani a kulɛri ye. Yeelen yelen cicogo tigitigi ka kan ka dafa cogoya sugandilen na.

Polikarbonati multiwall ka U-value ye mun ye?

Wallis bɛ sisan 3,9 fo 2,3 W/m²·K ɲɔgɔn jate 4–16mm cogoya sugandilenw kɔnɔ. U-nafa ye jɔcogo kɛrɛnkɛrɛnnen ye, o la sannikɛlaw ka kan ka nafa tigitigi ɲini a janya ni kogo jateminɛcogo sugandilen na.

Polikarbonati fan jumɛn ka kan ka ɲɛsin tile ma?

Ni sɛbɛn dɔ bɛ ni UV lakanani ye fan kelen dɔrɔn fɛ, taamasiyɛn kɛlen UV -lakanani yɔrɔ ka kan ka ɲɛsin kɛnɛma ma ka taa tile fan fɛ. Aw kana sɛbɛnfura sigi sani aw ka fan lakananen dɔn.

Yala Wallis bɛ se ka UV lakanani di fan fila bɛɛ fɛ wa?

Ni porozɛ in bɛ tile bɔli wajibiya fan fila fɛ, fan fila UV wajibiyalen dɔ fɔ ɲininkali kɔnɔ. Sɔrɔli ka kan ka dafa ka ɲɛsin jɔcogo sugandilen ma, a janya ani a bɔli hakɛ.

Mun na jibolisiraw ka kan ka boli ni so sanfɛla jiginni ye?

Ni aw ye kanalw boli ka jɔ walima ka jigin so sanfɛla la, o bɛ a to jisuma min bɛ panɛri kɔnɔ, o ka bɔ ni girinya ye. Kanal tilennenw bɛ se ka ji ni nɔgɔ minɛ.

Kogo caman sɛbɛnw dakun dafalenw ka kan ka datugu cogo di?

So sanfɛlan fɛɛrɛ min bɛ kɛ tuma caman na, o bɛ kɛ ni aluminiyɔmu kase ye min tɛ se ka don a kɔnɔ sanfɛ ani ninakililan min bɛ bɛn fiɲɛbɔlan ma duguma dakun na, min lakananen don ni dakun bɛnnenw ye. Aw bɛ tugu tuma bɛɛ sigicogo la min ɲɛfɔlen don sɛbɛnfura sugandilenw ni a kɔnɔfɛnw kama.

So sanfɛla jiginni jumɛn de wajibiyalen don?

Jiginni fitinin min bɛnnen don, o bɛ bɔ so sanfɛlan cogoya la. Baarakɛlaw ka kogo caman sigicogo caman bɛ 5° ɲɔgɔn ɲɛfɔ walima ka tɛmɛ o kan, k’a sɔrɔ sitɛmu dɔw bɛ fɔlikanba de wajibiya. Porozɛ ja ka kan ka tugu fɛn dilannikɛla ka sigicogo gafe laban na ani sigida ka jibɔcogo wajibiyalenw kɔ.

Yala polikarbonati sɛbɛnw bɛ bonya ni funteni ye wa?

Awɔ. Polikarbonati bɛ bonya ani ka dɔgɔya ni funteni ye. Dingɛw, profilw ani lamini yɔrɔw labɛnni ka kan ka kɛ sababu ye ka lamaga ka ɲɛ, wa sirilanw man kan ka siri kojugu.

Yala polikarbonati kogo caman bɛ se ka kɛ ka kɛ seriw ye wa?

Awɔ. Serrew ye baara fɔlɔ dɔ ye bawo pannew kogo caman bɛ yeelen bɔli dabɔlen, funteni kunbɛnni, jɔli nɔgɔman ani kɛnɛma UV lakanani fara ɲɔgɔn kan.

Yala anti-condensation coating bɛ sɔrɔ seriw kama wa?

Jagokɛlaw ka porozɛw bɛ nafa sɔrɔ tuma caman na ni furakɛli ye min bɛ kɛ ni jikuruw walima jikuruw kɛlɛli ye. Ni a mago bɛ a la, i k’a don ɲininkali kɔnɔ walasa Wallis ka se ka sɔrɔli dafa kogo caman jɔcogo sugandilen na.

UV -protected multiwall polycarbonate bɛ mɛn kɛnɛma waati joli?

Wallis b’a jira sisan ko o fɛn in bɛ san 10+ kɛnɛma muɲuli di, k’a sɔrɔ baarakɛ waati bɛ se ka ɲɔgɔn ta ni UV jirali ye, waati cogoya, sigili, sɛbɛnfura hakɛ ani ladonni. Garanti sariyakolow dafalenw dafa fɛn min yamaruyara tigitigi.

Kulɛri jumɛnw bɛ sɔrɔ?

Kulɛri minnu kofɔlen don sisan, olu ye jɛlen, kɔ bulu, jɛman, bulu, opal, fin, nɛgɛ, warijɛ jɛman, bilen ani jɛman ye. Kulɛri minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ walasa ka u dilanni hakɛ bɛnnenw sɔrɔ.

MOQ ye mun ye?

Sisan fɛn dilannenw ɲɛ bɛ MOQ sariyalen dɔ jira min bɛ se 1000m⊃2 ma; per thickness and color , k’a sɔrɔ kɔrɔbɔli yamaruya misɛnninw bɛ se ka baro kɛ. MOQ min bɛ sen na sisan, o dafa ka ɲɛsin sigicogo ni a ɲɛfɔli wajibiyalenw ma.

Yala ne bɛ se ka misaliw ɲini wa?

Wallis ɲɛ min bɛ yen sisan, o b’a jira ko A4 hakɛ misaliw bɛ se ka di fu, ni doni sarali ye kiliyan fɛ. Aw bɛ misali sɔrɔli dafa walasa ka a bonya, a kulɛri ani a kogo jɔcogo tigitigi min ka kan.

Tasuma hakɛ jumɛn bɛ o sɛbɛn in na?

Sisan fura ɲɛ bɛ B1 tasuma baarakɛcogo jira. Ikomi tasuma danfara bɛ danfara ka kɛɲɛ ni jamana ni sɛgɛsɛgɛli kɛcogo ye, aw bɛ tasuma sɛgɛsɛgɛli sariya tigitigi ɲini, rapɔɔri ani seere min ka kan ka kɛ aw ka taa sugu la sani aw ka komandi kɛ.

Yala Wallis bɛ se ka a bonya, a jɔcogo ani a foroko labɛn ka kɛɲɛ ni a yɛrɛ sago ye wa?

Awɔ. Wallis bɛ OEM dɛmɛ ani porozɛ minnu sinsinnen bɛ ladamuni kan kogo jɔcogo, a bonya, a bonya, a janya, a kulɛri, a sɛbɛnni ani a foroko bɔli jamana kɔkan ka kɛɲɛ ni a dilanni seko ye.

Ne ka kan ka kunnafoni jumɛnw di walasa ka quotation sɔrɔ?

Aw bɛ baarakɛcogo, kogo jɔcogo, a janya, a bonya, a janya, a kulɛri, a hakɛ, a poroze yɔrɔ, a laɲini U-nafa walima a yeelen bɔli, UV wajibiyalen, a ka kan ka kɛ ni jikuruw kɛlɛli ye, a jɔcogo doni kunnafoniw ani a foroko wajibiyalenw di.

Aw ye Quote ɲini ka ɲɛsin Polikarbonati so sanfɛlanw ma minnu bɛ kogo caman na

Aw bɛ ɲini min bɛ kogo caman kan polikarbonati sɛbɛn dilabaga , ka ɲɛsin seriw, sanfɛlanw, pɔrgolaw, canopies, carports walima jagokɛlaw ka so sanfɛlanw ma wa? Wallis bɛ UV -protected hollow PC sɛbɛnw di kogo jɔcogo caman na, u bonya, u kulɛriw ani u ladamulenw bɔli janya la B2B porozɛw kama.

Aw ye aw ka jɔcogo, a bonya, a bonya, a kulɛri, a hakɛ, a poroze sigiyɔrɔ ani a ka funteni walima a yeelenbɔcogo wajibiyalenw ci walasa ka fɛn dilannenw ladilikan bɛnnen sɔrɔ ani izini ka jatebɔ.