|
Wallis -Hollow Polikarbonɛt Shit
Wallis we nem Wallis
Olo Polikabɔnɛt Shit
| Kɔlɔ: | |
|---|---|
| Waid : | |
| Lɛngth : | |
| Kwantiti: | |
Wallis UV-protected hollow polycarbonate sheet na laytwɛt maltiwɔl glazing panɛl we dɛn mek fɔ grin haus ruf, skaylayt, pɔrgola, kapɔt, kanopi, wokay, akitekchral ruf ɛn industrial delaytin prɔjek.
Di olo chɛmba strɔkchɔ de kɔba natura layt transmishɔn wit impɔtant tɛmal insuleshɔn kɔmpia wit wan singl sɔlid shit. Wallis de saplae twin-wɔl, tripl-wɔl, 4-wɔl, ɔnikɔm, fayv-layer ɔnikɔm ɛn X-strakchɔ polikabɔnɛt panɛl dɛn we tik frɔm lɛk 4–30mm dipen pan strɔkchɔ , wit wit we go rich 2100mm.
Wan co-extruded UV-protective layer de ɛp fɔ protɛkt di polycarbonate agens di solar degradation fɔ lɔng tɛm. Klia, opal, brɔnz, blu, grɛn ɛn ɔda kɔstɔm kɔlɔ dɛn de fɔ B2B ruf, grɛnhaus ɛn akitɔkchral prɔjek dɛn.
| Prɔpati | Spɛsifikeshɔn / Ditiɛl dɛn |
|---|---|
| Tin dɛn | Polikabɔnɛt / PC |
| Men Strukchɔ Opshɔn dɛn | Twin Wall / Triple Wall / Fo Wall / Ɔnikɔm / 5-Layer Ɔnikɔm / X-Strɔkchɔ |
| Multiwall Tiknɛs Rɛnj | aprכksimatli 4–30mm dipכnt pan strכkchכ |
| Maksimal Width we dɛn dɔn list | I go rich 2100mm |
| Standart Ɛkspɔt Lɛngth dɛn | 5800 / 6000 / 11800 / 12000mm; kɔstɔm lɔng dɛn we de |
| Layt Transmishɔn | lεk 60–80% dipכnt pan di strכkchכ, tiknes εn kכla |
| Protɛkshɔn fɔ UV | Ko-ɛkstrud UV-protɛktiv layt; di pej list dɛn we de naw ≥50μm |
| Insuleshɔn fɔ Tɛmral | Kɔrɛnt listed U-valyu rɛnj aprɔksimatli 3.9–2.3 W/m²·K fɔ sɛlɛkɛt 4–16mm kɔnfigyushɔn |
| Impekt Pɔfɔmɛnshɔn | High-impact polycarbonate konstrakshɔn fɔ ruf ɛn glazing aplikeshɔn dɛn |
| Di we aw pɔsin kin de na do | Dɛn mek am fɔ lɔng tɛm savis na do; di ekzak warranty dipen pan di prodak gred ɛn di projɛkt spɛsifikɛshɔn |
| Faya Pɔfɔmɛnshɔn | Di pej dɛn we de naw na di list dɛn B1; kɔnfɔm aplikebul faya-tɛst standad ɛn sɛtifiket fɔ di gred we dɛn ɔda |
| Kɔlɔ dɛn | Klia / Lek Blu / Grin / Blu / Opal / Wayt / Bronz / Silva Grey / Rɛd / Yɔlɔ / Kastɔm |
| OEM / ODM we yu de yuz | Kastom tik, strɔkchɔ, wit, lɔng, kɔlɔ ɛn pak |
Notis: U-valyu, layt transmishɔn, shit wet, lod kapasiti, minim bɛnd rayus ɛn alawable sɔpɔt spɛshal difrɛn bay di wɔl strɔkchɔ, tiknes ɛn shit wet. Faynal projɛkt valyu dɛn fɔ kɔnfɔm frɔm di tɛknikal data shit fɔ di kɔnfigyushɔn we dɛn dɔn pik.
Sanlayt Olo Polikabɔnɛt Sheet
Multiwall Polikabɔnɛt Ruf Panel
Wal strɔkchɔ de ditarmin insuleshɔn, panɛl wet, stiffness ɛn layt transmishɔn. Di tebul we de dɔŋ ya de kip di prɔdak rɛnj dɛn we Wallis de list naw. Dis pej de tɔch mɔ fɔ ɔlo ɛn mɔltiwɔl ruf panɛl dɛn, we dɛn sho bak di rilayt sɔlid, kɔrɛg ɛn lɔk dizayn dɛn fɔ di wan dɛn we de bay we de sɔs bɔku bɔku PC sheet tayp dɛn.
| Prodakt Tayp | Tiknes | Width |
|---|---|---|
| Twin-Wal Polikabɔnɛt Shit | 4–12mm we de na di wɔl | 2100mm na wan |
| Tripul-Wal Polikabɔnɛt Shit | 8–16mm | 2100mm na wan |
| Fo-Wal Polikabɔnɛt Shit | 8–20mm na di wan | 2100mm na wan |
| Ɔnikɔm Polikabɔnɛt Sheet | 6–11mm | 2100mm na wan |
| 5-Layer Honikɔm Polikabɔnɛt Shit | 14–25mm we de na di wɔl | 2100mm na wan |
| X-Strɔkchɔ Polikabɔnɛt Shit | 14–30mm na di wɔl | 2100mm na wan |
| Sɔlid Polikabɔnɛt Shit | 0.9–8mm na di wan | 1220 / 1560 / 1820 / 2100mm; di kɔmɔn saiz dɛn inklud 1220 × 2440mm ɛn 2050 × 3000mm |
| Kɔrɔgɛt Polikabɔnɛt Shit | 0,8–2,5mm na di wan | Dɛn mek am fɔ yusɛf |
| Lɔk-Dizayn Polikabɔnɛt Shit | 3–10mm na di wan | 1040mm na wan |
| Di Lɛngth dɛn we Dɛn Rikɔmɛnd fɔ Ɛkspɔt | ||
| 5800 / 6000 / 11800 / 12000mm na rεkomεnd fכ efyushכn 20-fut εn 40-fut kכntena lod. Wi kin tɔk bɔt ɔda lɔng tin dɛn. | ||
| Di Kɔlɔ dɛn we De | ||
| Klia / Transparent, Lek Blu, Grin, Blu, Opal, Wayt, Bronz, Silva Grey, Rɛd, Yɔlɔ ɛn kɔstɔmayt kɔlɔ dɛn. | ||
Polikabɔnɛt Shit Strukchɔ Opshɔn dɛn
Multiwall polycarbonate de yuz intanɛnt ay chɛmba fɔ ridyus ɔt transfɔm tru di panɛl. If yu inkrisayz di nɔmba fɔ di wɔl ɔ di intanɛnt strɔkchɔral layers kin mek di insuleshɔn bɛtɛ, pan ɔl we di pefɔmɛns kin dipen bak pan di tik we di shit tik, di jɔyometri ɛn di eria wet.
U-valyu de mɛzhɔ ɔt transfɔm tru wan bildin kɔmpɔnɛnt. If yu gɛt U-valyu smɔl, dat min se yu go gɛt bɛtɛ tɛmal insuleshɔn . Wallis naw de list lɛk 3.9 W/m²·K fɔ sɔm 4mm kɔnfigyushɔn dɛn we dɛn dɔn pik ɛn lɛk 2.3 W/m²·K fɔ sɔm 16mm kɔnfigyushɔn dɛn we dɛn dɔn pik.
Bikɔs tu sheet dɛn we gɛt di sem tik kin yuz difrɛn wɔl strɔkchɔ ɛn matirial wet, di wan dɛn we de bay fɔ kɔmpia di patikyula U-valyu fɔ di ɛksaktɔl prɔdak pas fɔ pik jɔs bay tik.
Twin-wɔl sheet dɛn de gi wan ikɔnomik balans fɔ natura layt, wet ɛn insuleshɔn fɔ grin haus ɛn smɔl ruf aplikeshɔn dɛn. Tripul-wɔl ɛn 4-wɔl dizayn dɛn ad intanɛnt layers fɔ mek insuleshɔn ɛn stiffness go ɔp, we tik X-strakchɔ ɛn mɔlti-layer dizayn dɛn bɛtɛ fɔ projɛkt dɛn we nid strɔng tɛmal pefɔmɛns ɛn big panɛl rigiditi.
dipכnt pan di tik, di wכl strכkchכ εn di kכla, Wallis naw de list lεk 60–80% layt transmishכn. Dɛn kin pik klia panɛl dɛn usay dɛn nid fɔ gɛt maksimal de layt, we opal, brɔnz ɛn kɔlɔ sheet dɛn kin ridyus di glare ɔ solar braytnɛs.
Di ko-extruded UV-resistant surface layer na fɔ protɛkt di polycarbonate insɛf frɔm lɔng tɛm solar degradation, ɛp fɔ ridyus yɔlɔ ɛn lɔs mɛkanikal pefɔmɛns we dɛn de du ɔda savis.
Polikabɔnɛt de gi ay impak rɛsistɛns we yu kɔmpia am wit britl glazing matirial, we de mek maltiwɔl panɛl dɛn fayn fɔ ruf, skaylayt ɛn agrikalchɔral glazing usay di briz-blɔd dɛbris ɔ ays kin bi sɔntin we de mɔna. Di prɔjek-spɛsifi k ays ɔ impak rikwaymɛnt dɛn fɔ kɔnfyus agens di sheet gred ɛn tɛst data we dɛn dɔn pik.
כlo panεl dεm de yuz intanεt rib dεm pas wan komplit sכlid kכros-sεkshכn, we de εp fכ ridyus panεl wet we dεn de mεnten strכkchכral jכmetri. Lɔwa panɛl wet kin mek i izi fɔ transpɔt, lif ɛn instɔleshɔn we yu kɔmpia am wit ebi ebi glazing sistem dɛn.
Di ay chɛmba dɛn we dɛn lɔk de ridyus kɔnduktiv ɔt transfɔm, we de mek maltiwɔl PC bi yusful delaytin matirial fɔ grin haus, kɔnsavatori ɛn ruf usay ɔl tu di layt transmishɔn ɛn insuleshɔn impɔtant.
Difrɛn kɔlɔ ɛn di wɔl strɔkchɔ dɛn de alaw di wan dɛn we de bay fɔ balans di layt we de de, prayvet pat, solar kɔntrol, aesthetics, stiffness ɛn insuleshɔn akɔdin to ɛni grɛnhɔus ɔ akitɔkchral prɔjek.
Advantej dɛn fɔ PC Hollow Sheet
Multiwall PC Sheet Bɛnifit dɛn
Strɔng we gɛt ay impak
Aesthetic Fleksibiliti fɔ di tin dɛn we pɔsin kin du
Dɛn kin tink bɔt am fɔ laytwɛt grɛnhɔus glaz, smɔl shelta, patishɔn ɛn prɔjek usay ikɔnomik de layt impɔtant pas maksimal insuleshɔn.
I fayn fɔ bɔku grɛnhɔus, kanopi, pɔrgola, skaylayt ɛn kapɔt aplikeshɔn usay di wan dɛn we de bay nid strɔng balans fɔ rigiditi, layt transmishɔn ɛn tɛmal insuleshɔn.
Tik triplɛ-wɔl, 4-wɔl ɔ riinfɔs strɔkchɔ dɛn bɛtɛ fɔ projɛkt dɛn we de prɔyoritɛt impɔtant insuleshɔn, big stiffness ɔ lɔng panɛl span. Faynal sɔpɔt spɛshal stil dipen pan di shit wet, sno lod, briz lod ɛn strɔkchɔral dizayn.
Riinfɔs mɔlti-layer kɔnfigyushɔn dɛn de fɔ prɔjek dɛn we nid ay insuleshɔn ɛn stiffnɛs. Di wan dɛn we de bay fɔ aks fɔ di rayt U-valyu, eria wet, lod tebul ɛn span rɛkɛmɔndeshɔn fɔ di prɔfayl we dɛn dɔn pik.
Di wan dɛn we de bay grinhaus fɔ pik di sheet kɔlɔ ɛn strɔkchɔ akɔdin to di krop layt we dɛn nid. Klia sheet dɛn kin mek di de layt we pɔsin kin si maksimal, we difyuz ɔ opal kɔnfigyushɔn kin gi layt distribyushɔn we soft usay dɛn nid am.
Kɔl klaymat ɛn ɔt kɔmɛshɔnal grin haus dɛn kin bɛnifit frɔm di U-valyu we smɔl. Fɔ kɔmpia ɛksaktɔl tɛknikal data fɔ 8mm, 10mm, 16mm ɛn tik mɔltiwɔl strɔkchɔ dɛn, yusful pas fɔ kɔmpia tiknes nɔmɔ.
Kɔmɛshɔnal grin haus kin nid fɔ gɛt anti-kɔndɛns ɔ anti-drip sɔfays fɔ ridyus di drɔp fɔmɛshɔn ɛn fɔ mek di wata kɔmɔt fayn. If dis fɛnshɔn nid fɔ de, spɛsifa am na di inkwyuiz so dat dɛn go kɔnfɔm di avaylabl ɛn pefɔmɛns fɔ di Wallis gred we yu dɔn pik.
Fɔ panɛl dɛn we gɛt UV-protɛkt wan sayd, di say we dɛn mak UV-protɛkt fɔ fes to di san. If ɔl tu di say dɛn kin gɛt dairekt solar ɛksplɔshɔn, aks if tu-sayd UV kɔnfigyushɔn de fɔ di prɔdak we yu dɔn pik.
Multiwall polycarbonate de kam togɛda wit de layt wit tɛmal insuleshɔn ɛn impak resistans, we de mek i fayn fɔ kɔmɛshɔnal grin haus, gadin sɛnta, nɔsri strɔkchɔ ɛn ɔda agrikalchɔral glazing projɛkt dɛn.
Transparent ɔ translucent multiwall panels kin introduks de layt insay westɛm, wokshɔp, kɔmɛshɔnal bildin ɛn rezidenshɛl strɔkchɔ dɛn we de ridyus di wet we gɛt fɔ du wit tradishɔnal glazing.
Dɛn kin yuz panɛl dɛn we klia, brɔnz, opal ɛn kɔlɔ fɔ mek pɔrgola ɛn ples dɛn we dɛn kin kɔba na do usay dɛn nid fɔ protɛkt di wɛda ɛn layt fɔ de.
Laytwɛt UV-protɛkt polikabɔnɛt de gi prɛktikal ruf matirial fɔ ɛntrɛ, wokay, steshɔn, skul ɛn kɔmɛshɔnal kanopi.
Multiwall PC roofing kin protɛkt motoka frɔm ren ɛn dairekt wɛda we i de alaw natura layt fɔ kam insay di eria we dɛn kɔba. Dɛn kin tink bɔt brɔnz, opal ɛn solar-kɔntrol kɔlɔ usay glare ɛn ɔt gain na kɔnsyans.
Yu kin yuz olo PC panɛl dɛn bak na translucent facades, wall systems ɛn decorative partitions usay dizayna dɛn nid laytwɛt translucent bildin elements.
Grinhaus Ruf we dɛn de mek
Kanopi & Wakways
Fɔ mek ruf
If di sheet we yu dɔn pik gɛt UV protɛkshɔn na wan say, instɔl di fes we gɛt UV-protɛkt we dɛn mak klia wan to di san. Nɔ pul di aydentifying protɛktiv film te dɛn kɔnfyus di panɛl ɔriɛnteshɔn.
di intanεt rib dεm εn chanεl dεm fכ nכmal fכ rכn vεtikal כ insay di dairekshכn we di ruf de fכl so kכndεns insay di chanεl dεm kin dreyn bay graviti pas fכ trכp.
Di ɔpa ɛnd pan di sheet kin kɔmɔn fɔ sial wit aluminiɔm tep we nɔ de pas, we di ɔda ɛnd kin yuz kɔmpitabl ventilated ɔ brith tep ɛn ɛnd profayl. Di rayt we fɔ sidɔm fɔ fala di ruf sistɛm we dɛn dɔn pik so dat dɔst, insɛkt ɛn mɔstɔ we pasmak nɔ go go insay di chanɛl dɛn we de insay.
Ruf pitch fɔ mek ren wata rɔn we pɔsin kin abop pan ɛn intanɛnt kɔndenseshɔn drenaj. Di ɛksaktɔl minim slɔp dipen pan di kɔmplit ruf sistɛm; bɔku prɔfɛshɔnal maltiwɔl sistɛm dɛn de yuz lɛk 5° ɔ mɔ, we sɔm spɛshal sistɛm dɛn nid fɔ gɛt big slɔp. Fɔ fala di injinɛri ɛn instɔleshɔn gayd fɔ di prɔfayl we yu dɔn pik.
Polikabɔnɛt de bɔku ɛn kɔntrakt as di tɛmpracha de chenj. Kɔnɛkshɔn profayl, fiks ol ɛn ed kliarens fɔ alaw fɔ muv. Fasteners nɔ fɔ klem di sheet so tayt dat thermal movement go mek strɛs ɔ buckling.
We yu de instɔl ɛn mentenɛns, yuz fayn krawl bod, lada ɔ pletfɔm we de sheb bɔdi wet tru di sɔpɔtin strɔkchɔ pas fɔ tinap dairekt pan mɔltiwɔl panɛl dɛn we nɔ gɛt sɔpɔt.
Fɔ instɔl wan sayd UV-protɛkt sheet ɔpsayd dɔŋ.
Instɔl olo chanɛl dɛn ɔrizɔntal wan so dat kɔndenseshɔn nɔ go ebul fɔ dreyn.
Sial ɔl tu di ɛnd dɛn kɔmplit wan we yu nɔ gɛt di ventilashɔn ɔ drenaj sistɛm we yu nid.
Yuz silikon, adeziv ɔ silin matirial dɛn we nɔ kɔmpitabl.
Ɔva-tayt di fastɛns dɛn ɛn fɔ mek di tɛmal muvmɛnt nɔ muv.
Yuz di ruf slop we nɔ go du fɔ yu.
Fɔ lɛf opin chanɛl dɛn we de na dɔst, insɛkt ɛn mɔstɔ.
Fail fɔ pul di ɛkstirian protɛktiv film afta dɛn dɔn instɔl am.
Yuz sɔpɔt spɛshal we dɛn nɔ chɛk fɔ lokal briz ɔ sno lod.
| Kɔmpiashɔn | Mɔltiwɔl Polikabɔnɛt | Glas |
|---|---|---|
| We | Layt wet ɔlo kɔnstrɔkshɔn | I bin ebi pasmak |
| Impakt Biɛvhɔ | Ay impak resistans | Mɔ brittle dipen pan di kayn glas |
| Insuleshɔn fɔ Tɛmral | Di chɛmba dɛn we de mek di briz de mek di ples fayn fɔ mek di insuleshɔn bɛtɛ | Dipen pan singl, laminated ɔ insulated glazing kɔnstrɔkshɔn |
| Layt Transmishɔn | I ay bɔt i kin difrɛn wit di wɔl strɔkchɔ ɛn kɔlɔ | Jɛnɛral wan ay fɔ klia glazing |
| Instɔlɛshɔn | I izi fɔ kɔt ɛn layt, bɔt i nid fɔ gɛt tɛmal-ɛkspɛnshɔn alawɛns | Rikways glas-kɔmpatibl hanlin ɛn strɔkchɔral sistɛm |
| Tipik Aplikeshɔn dɛn | Grinhaus, skaylayt, kanopi, pergola ɛn laytwɛt ruf | Arkitekchral glazing ɛn prɛmiɔm transparent ruf sistem dɛn |
Klia panɛl dɛn de gi di ays de layt transmishɔn ɛn dɛn kin yuz am fɔ grin haus, skaylayt ɛn prɔjek usay natura layt na di prayoritɛd.
Opal sheet dɛn de mek mɔ difyuz iluminɛshɔn ɛn vijual prayvet pat. Bɔku tɛm dɛn kin pik dɛn fɔ kanopi, akitɔkchral de layt ɛn kɔmɛshɔnal ruf.
Tinted sheet dɛn de ridyus di braytnɛs we pɔsin kin si ɛn i kin gi mɔ shed vishɔnal ɛnvayrɔmɛnt fɔ patio, pɔrgola, kapɔt ɛn akitɔk ruf.
Yu kin yuz kala maltiwɔl sheet fɔ akitɔkchral dizayn, branding ɛn dɛkɔretiv ruf. Kɔlɔ sɛmpul dɛn fɔ apruv bifo bɔku ɔda usay dɛn fɔ apia impɔtant.
Twin-wɔl, tripl-wɔl, 4-wɔl, ɔnikɔm ɛn X-strɔkchɔ panɛl dɛn
Kastom tiknes bay strɔkchɔ
Widths op to 2100mm
Kastom projɛkt lɔng dɛn
Kontena-optimayz 5800 / 6000 / 11800 / 12000mm lɔng
Klia, opal, brɔnz, blu, grɛn ɛn kɔstɔm kɔlɔ dɛn
UV-protɛkt kɔnfigyushɔn dɛn
Projek-spɛsifi k layt transmishɔn
OEM labeling ɛn pakej
Sampul ɛvalueshɔn
Bulk distributor ɛn projɛkt saplai
Aplikeshɔn: grinhaus, skaylayt, kanopi, pɔrgola, kapɔt ɔ fasad
Struktrɔ na di wɔl we dɛn nid
Tik we dɛn nid
Wid ɛn lɔng
Kwantiti we dɛn nid insay m²
Kɔlɔ
Target layt transmishɔn
Target U-valyu, if dɛn spɛsifa am
Singl-sayd ɔ tu-sayd UV rikwaymɛnt
Anti-kɔndɛnseshɔn rikwaymɛnt, if i apɔynt
Di say we di prɔjek de ɛn di klaymat
Wind ɛn sno lod we dɛn nid
Sɔpɔt spays / strɔkchɔral drɔin
Faya-rɛytin we dɛn nid
Di tin dɛn we dɛn nid fɔ pak ɛn lod di kɔntena
Kɔnsistɛns maltiwɔl polikabɔnɛt pefɔmɛns dipen pan ɛkstrushɔn kwaliti, rib jɔyometri, wɔl tiknɛs, UV-layer kɔnsistɛns ɛn dimɛnshɔnal kɔntrol. Wallis de sɔpɔt kwaliti inspekshɔn fɔ B2B ruf ɛn grɛnhɔus saplai.
Tiknes ɛn dimɛnshɔnal inspekshɔn
Inspekshɔn fɔ di strɔkchɔ na di wɔl ɛn di rib
UV-layer inspekshɔn we dɛn kin du
Layt transmishɔn inspekshɔn
Inspekshɔn fɔ kɔnsistɛns di kɔlɔ
Impekt-pεrformεns evalueshכn
UV evalueshɔn fɔ ol ol
Inspekshɔn fɔ pak ɛn lod di kɔntena
Wallis de gi extrusion, UV coating, cutting ɛn export saplae fɔ polycarbonate sheet projɛkt, sɔpɔt distribyushɔn, grinhaus bilda ɛn ruf kɔntrakta wit faktri-based kɔmyunikeshɔn.
Baya dɛn kin sɔs twin-wɔl, tripl-wɔl, 4-wɔl, ɔnikɔm, X-strɔkchɔ ɛn rilat sɔlid ɔ kɔrɛkt PC prodak fɔ difrɛn prɔjek rikwaymɛnt frɔm wan spɔlayt.
Tiknes, strɔkchɔ, kɔlɔ, shit dimɛnshɔn, pak ɛn prɔjek-spɛsifi k spɛsifikɛshɔn dɛn kin tɔk bɔt fɔ distribyushɔn program ɛn kɔnstrɔkshɔn prɔjek.
Rikɔmɛnd 5800 / 6000 / 11800 / 12000mm lɔng kin mek yu yuz 20-fut ɛn 40-fut kɔntena dɛn fayn ɛn ridyus fɔ kɔt we nɔ nid fɔ mek big ruf ɛn grɛnhɔus ɔda.
Di wan dɛn we de bay kin gi strɔkchɔral drɔin, di ruf dimɛnshɔn, klaymat data ɛn di tin dɛn we di prɔjek nid so dat dɛn kin ebul fɔ evalyu di tik we fit, strɔkchɔ ɛn shit fɔmat bifo dɛn ɔda.
Di Kɔmni Ɛvride Ɔpreshɔn
Multiwall polycarbonate na wan extruded PC panɛl we gɛt olo intanɛnt chɛmba dɛn we rib dɛn separet. di ay spεs dεm de ridyus di hεt tכnfכs we di rib dεm de gi strכkchכral sכpכt, we de prodyuz laytwεt delaytin panεl fכ ruf εn glaz.
Wallis in kכrant rεnj de kכba aprכksimatli 4–30mm fכ olo εn mכltiwal strכkchכ dεm . Twin wכl dεn list am na 4–12mm, tripl wכl 8–16mm, fכ wכl 8–20mm, כni kכm 6–11mm, fayv-layεr כni kכm 14–25mm εn X-strכkchכ 14–30mm.
Di men Wallis olo ɛn maltiwɔl strɔkchɔ dɛn de na di list naw wit wit we go rich 2100mm . Kɔnfɛm di rayt prodakshɔn wit fɔ di prɔfayl we yu dɔn pik bifo yu ɔda.
Di lɔng dɛn we dɛn mek fɔ yusɛf de. Wallis rikɔmɛnd 5800, 6000, 11800 ɛn 12000mm fɔ efyushɔn 20-fut ɛn 40-fut kɔntena lod.
Di Wallis pej we de naw de list lɛk 60–80% dipen pan di tik, di wɔl strɔkchɔ ɛn di kɔlɔ. Eksakt visible layt transmishɔn fɔ kɔnfɔm fɔ di kɔnfigyushɔn we yu dɔn pik.
Wallis naw de list aprכksimatli 3.9 to 2.3 W/m²·K akraos sεlekt 4–16mm kכnfigureshכn dεm. U-valyu na strɔkchɔ-spɛsifi k, so di wan dɛn we de bay fɔ aks fɔ di rayt valyu fɔ di tik we dɛn pik ɛn di jɔyometri we dɛn dɔn pik.
If wan sheet gɛt UV protɛkshɔn na wan say nɔmɔ, di say we dɛn mak UV-protɛkt fɔ fes ɔdasay to di san. Nɔ instɔl di sheet bifo yu no di say we dɛn protɛkt.
If di prɔjek nid fɔ yuz tu-sayd solar ɛksplɔshɔn, spɛsifa tu-sayd UV rikwaymɛnt na di inkwyuizhɔ. Avaylabl fɔ kɔnfyus fɔ di strɔkchɔ we dɛn pik, tik ɛn prodakshɔn kwantiti.
We yu rɔn di chanɛl dɛn vertikal ɔ dɔŋ di ruf slɔp, dat kin mek di kɔndenseshɔn mɔstɔ we de insay di panɛl dreyn bay graviti. Ɔrizɔntal chanɛl dɛn kin trap mɔstɔ ɛn kɔntaminɛshɔn.
Wan kɔmɔn we fɔ ruf de yuz aluminiɔm tep we nɔ de pas na di ɔpa ɛnd ɛn kɔmpitabl ventilated breda tep na di ɔda ɛnd, we dɛn protɛkt wit fayn ɛnd profayl dɛn. Ɔltɛm fala di instɔleshɔn sistem we dɛn dɔn spɛsifa fɔ di sheet ɛn aksesɔri dɛn we yu dɔn pik.
Di kɔrɛkt minim slɔp dipen pan di ruf sistɛm. Bɔku prɔfɛshɔnal maltiwɔl sistɛm dɛn kin spɛsifa lɛk 5° ɔ mɔ, we sɔm sistɛm dɛn nid fɔ gɛt big pitch. Di prɔjek drɔin dɛn fɔ fala di las manifakta in instɔleshɔn gayd ɛn di lokal drenaj rikwaymɛnt dɛn.
Yɛs. Polikabɔnɛt de bɔku ɛn kɔntrakt wit di tɛmpracha. Fɔ fiks ol, profayl ɛn perimita kliarens fɔ gi inof muvmɛnt, ɛn fastɛns nɔ fɔ ɔva tayt.
Yɛs. Grinhaus na wan pan di praymar aplikeshɔn bikɔs maltiwɔl panɛl dɛn de jɔyn natura layt transmishɔn, tɛmal insuleshɔn, laytwɛt kɔnstrɔkshɔn ɛn ɔda UV protɛkshɔn.
Bɔku tɛm, di kɔmɛshɔnal grɛnhɔus prɔjek dɛn kin bɛnifit frɔm anti-kɔndɛnseshɔn ɔ anti-drip tritmɛnt. If nid de, put am na di inkwyuiz so Wallis go kɔnfɔm se i de fɔ di maltiwɔl strɔkchɔ we yu dɔn pik.
Wallis naw de diskraib di matirial se i de gi 10+ ia ɔda durabiliti, we di savis layf kin difrɛn wit UV ɛksplɔshɔn, klaymat, instɔleshɔn, shit gred ɛn mentenɛns. Kɔnfɛm di fɔmal warranty tɛm fɔ di ɛksaktɔl prɔdak we dɛn ɔda.
Di kɔlɔ dɛn we dɛn dɔn list naw na klia, lek blu, grɛn, blu, opal, wayt, brɔnz, silva grey, rɛd ɛn yɔlɔ. Dɛn kin tɔk bɔt di kɔlɔ dɛn we dɛn mek fɔ di rayt we fɔ mek dɛn ebul fɔ mek dɛn.
Di prodak pej we de naw de list wan standad MOQ we na lɛk 1,000m² per tik ɛn kɔlɔ , we dɛn kin tɔk bɔt smɔl smɔl trayal ɔda dɛn. Konfam di MOQ we de naw fɔ di strɔkchɔ ɛn spɛsifikɛshɔn we dɛn nid.
Di Wallis pej we de naw se dɛn kin gi A4-sayz sɛmpul dɛn fɔ fri, wit freyt we di kɔstɔma pe. Kɔnfɛm sampul avaylabl fɔ di ɛksaktɔ tik, kɔlɔ ɛn wɔl strɔkchɔ we dɛn nid.
Di prodak pej we de naw de sho B1 faya pefɔmɛns. Bikɔs faya klasifikeshɔn kin difrɛn bay kɔntri ɛn di we aw dɛn de du di tɛst, aks fɔ di rayt faya-tɛst standad, ripɔt ɛn sɛtifiket we yu nid fɔ di makit usay yu de go bifo yu ɔda.
Yɛs. Wallis de sɔpɔt OEM ɛn projɛkt-bɛs kɔstɔmayshɔn fɔ di wɔl strɔkchɔ, tiknɛs, wit, lɔng, kɔlɔ, lɛbl ɛn ɛkspɔt pak akɔdin to prodakshɔn fisibiliti.
Gi di aplikeshɔn, di wɔl strɔkchɔ, tiknes, wit, lɔng, kɔlɔ, kwantiti, di prɔjek ples, target U-valyu ɔ layt transmishɔn, UV rikwaymɛnt, anti-kɔndɛnseshɔn rikwaymɛnt, strɔkchɔral lod infɔmeshɔn ɛn rikwayd pak.
Yu de luk fɔ wan multiwall polycarbonate sheet manifakta fɔ grin haus, skaylayt, pɔrgola, kanopi, kapɔt ɔ kɔmɛshɔnal ruf? Wallis de saplae UV-protɛkt olo PC sheet dɛn insay bɔku bɔku wɔl strɔkchɔ dɛn, tiknɛs, kɔlɔ ɛn kɔstɔm ɛkspɔt lɔng fɔ B2B prɔjek dɛn.
Send yu strɔkchɔ, tik, dimɛnshɔn, kɔlɔ, kwantiti, di say we yu de du di prɔjek ɛn di tin dɛn we yu nid fɔ du fɔ mek yu gɛt tɛmal ɔ layt-transmishɔn fɔ mek yu gɛt fayn prɔdak rɛkɔmɛndishɔn ɛn kot fɔ di faktri.
