UV-Abɔ ho ban Hollow Polycarbonate Krataa | Multiwall Owia Hann Ɔdan atifi Panels

Multiwall Polycarbonate Ntama a Wɔde UV abɔ ho ban a wɔde yɛ ɔdan atifi ne afie a ɛyɛ hyew

Wallis UV-protected hollow polycarbonate sheet yɛ multiwall glazing panel a emu yɛ hare a wɔayɛ ama greenhouse roofing, skylights, pergolas, carports, canopies, nantew akwan, adansi dan atifi ne mfiridwuma mu awia kanea adwuma.

Hollow chamber nhyehyɛe no de abɔde mu hann a wɔde fa nneɛma mu ne ɔhyew a ɛbɔ ho ban a wɔatu mpɔn bom bere a wɔde toto krataa biako a ɛyɛ den ho no. Wallis de ɔfasuo mmienu, ɔfasuo mmiɛnsa, ɔfasuo anan, ɛwoɔ, ɛwoɔ a ɛwɔ ntoatoasoɔ anum ne X-nhyehyɛeɛ polycarbonate panels ma wɔ ne kɛseɛ firi bɛyɛ 4–30mm gyina structure , a ne tɛtrɛtɛ kɔsi 2100mm.

UV-protective layer a ɛka bom a ɛbɔ ho ban boa ma wɔbɔ polycarbonate no ho ban fi owia a ɛbɛsɛe bere tenten ho. Kɔla a emu da hɔ, opal, kɔbere, bruu, ahabammono ne amanne kwan so kɔla afoforo wɔ hɔ ma B2B ɔdan atifi, greenhouse ne adansi adwuma.

Multiwall Polycarbonate Krataa Mfiridwuma Ho Nsɛm

Hyɛ no nsow: U-bo, hann a wɔde fa so, krataa mu duru, adesoa tumi, bending radius a ɛba fam koraa ne mmoa ntam kwan a wɔma ho kwan no gu ahorow wɔ ɔfasu nhyehyɛe, ne kɛse ne krataa mu duru so. Ɛsɛ sɛ wɔsi adwuma no botaeɛ a ɛtwa toɔ no so dua firi mfiridwuma ho nsɛm krataa a ɛfa nhyehyɛɛ a wɔapaw no ho.

Polycarbonate Nneɛma a Ɛwɔ Hɔ, Ne Ntrɛwmu ne Ne Trɛw

Ɔfasu nhyehyɛe na ɛkyerɛ insulation, panel mu duru, stiffness ne hann transmission. Pon a edidi so yi kura Wallis nneɛma ahorow a wɔakyerɛw mprempren no so. Saa krataafa yi titiriw de n’ani si hollow ne multiwall roofing panels so, bere a ɛfa ho solid, corrugated ne locking designs nso wɔakyerɛ ama adetɔfo sourcing PC krataa ahorow pii.

Polycarbonate Krataa Nhyehyɛe Ho Nneɛma a Wɔpaw

Sɛnea Multiwall Polycarbonate Ma Ɔhyew a Wɔde Siw Ɔhyew Ho Tu mpɔn

Multiwall polycarbonate de mframa dan a ɛwɔ mu di dwuma de tew ɔhyew a ɛfa panel no so no so. Sɛ wɔma afasuo dodoɔ anaa emu structure layers no kɔ soro a, ɛbɛtumi ama insulation atu mpɔn, ɛwom sɛ adwumayɛ nso gyina krataa no kɛseɛ, geometry ne area weight so.

Dɛn na U-Value Kyerɛ?

U-botae susuw ɔhyew a ɛfa ɔdan no fã bi mu. U -bo a ɛba fam kyerɛ sɛ wɔde ɔhyew a ɛbɔ ho ban yiye . Mprempren Wallis kyerɛw bɛyɛ 3.9 W/m²·K ma 4mm nhyehyɛe a wɔapaw ne bɛyɛ 2.3 W/m²·K ma 16mm nhyehyɛe a wɔapaw.

Esiane sɛ nkratafa abien a ne kɛse yɛ pɛ betumi de ɔfasu nhyehyɛe ne nneɛma mu duru ahorow adi dwuma nti, ɛsɛ sɛ adetɔfo de U-bo pɔtee a ɛwɔ ade pɔtee no ho toto ho sen sɛ wɔbɛpaw denam ne kɛse nkutoo so.

Twin Wall vs Triple Ɔfasu vs X-Nhyehyɛe

Twin-wall sheets ma sikasɛm mu kari pɛ a ɛkari pɛ wɔ abɔde mu hann, mu duru ne insulation ma greenhouses ne nketewa a wɔde di dwuma wɔ ɔdan atifi. Fasu abiɛsa ne ɔfasu anan nhyehyɛe de emu ntoatoaso ka ho ma insulation ne stiffness kɔ soro, bere a X-nhyehyɛe a ɛyɛ den ne multi-layer nsusuwso fata yiye ma nnwuma a ɛhwehwɛ sɛ ɔhyew adwumayɛ a emu yɛ den ne panel rigidity kɛse.

Mfaso Titiriw a Ɛwɔ Polycarbonate Krataa a Ɛyɛ Tokuru a UV Abɔ Ho Ban So

Abɔde mu Hann a Wɔde Kɔma

Ɛgyina ne kɛseɛ, ɔfasuo nhyehyɛeɛ ne kɔla so no, Wallis mprempren kyerɛw bɛyɛ 60–80% hann a ɛkɔ. Wɔtaa paw nnua a emu da hɔ wɔ baabi a ɛho hia sɛ awia hann kɛse no, bere a opal, kɔbere ne ntama a ɛwɔ kɔla ahorow betumi atew hann a ɛhyerɛn anaa owia hann so.

Co-Extruded UV Ahobammɔ

Wɔayɛ co-extruded UV-resistant surface layer no titiriw sɛ ɛbɛbɔ polycarbonate no ankasa ho ban afi owia a ɛbɛsɛe bere tenten ho, na ɛboa ma ɛyɛ kɔkɔɔ ne mfiri adwumayɛ a ɛyera bere a wɔreyɛ adwuma wɔ abɔnten no so.

Nkɛntɛnso a Ɛkorɔn a Ɛko Tia

Polycarbonate ma ahoɔden a ɛko tia nsunsuansoɔ kɛseɛ sɛ wɔde toto nneɛma a wɔde yɛ ahwehwɛ a ɛyɛ mmerɛw ho a, ɛma afasuo pii a wɔde yɛ afasuo no fata ma ɔdan atifi, wim ahwehwɛ ne kuayɛ mu ahwehwɛ wɔ baabi a mframa bɔ mu nneɛma a asɛe anaa asukɔtweaa betumi ayɛ ade a ɛhaw adwene. Ɛsɛ sɛ wɔsi asukɔtweaa anaa nsunsuansoɔ a ɛfa adwuma pɔtee bi ho no so dua de toto krataa so abasobɔdeɛ ne sɔhwɛ ho nsɛm a wɔapaw no ho.

Ɔdan atifi a Ɛyɛ Hare

Panel a ɛwɔ tokuru no de mpampam a ɛwɔ mu di dwuma sen sɛ wɔde cross-section a ɛyɛ den koraa bedi dwuma, na ɛboa ma panel mu duru so tew bere a ɛkɔ so kura structure geometry mu no. Panel mu duru a ɛba fam betumi ama akwantu, nea wɔma so ne nea wɔde si hɔ no ayɛ mmerɛw sɛ wɔde toto glazing nhyehyɛe a emu yɛ duru ho a.

Ahoɔden a Wɔde Di Dwuma Yie a Ɛtu Mpɔn

Mframa adan a wɔato mu no brɛ ɔhyew a ɛkɔ mu no ase, na ɛma multiwall PC yɛ ade a mfaso wɔ so a wɔde ma awia hann ma greenhouses, conservatories ne ɔdan atifi a hann a ɛkɔ ne insulation nyinaa ho hia.

Kɔla ne Nneɛma a Wɔahyehyɛ no Amanneɛbɔ

Kɔla ahorow ne ɔfasu nhyehyɛe ma adetɔfo ma awia hann, kokoamsɛm, owia ahoɔden a wɔde di dwuma, afɛfɛde, stiffness ne insulation kari pɛ sɛnea greenhouse anaa adansi adwuma biara kyerɛ.

Sɛnea Wobɛpaw Multiwall Polycarbonate Nhyehyɛe a Ɛfata

4–6mm Ɔfasu a Ɛyɛ Twin

Wɔtaa susuw ho ma greenhouse glazing a emu yɛ hare, dabere nketewa, mpaapaemu ne nnwuma a sikasɛm mu awia hann ho hia sen insulation a ɛsen biara.

8–10mm Twin anaa Triple Ɔfasu

Ɛfata ma greenhouse, canopy, pergola, skylight ne carport applications pii a adetɔfo hia kari pɛ a emu yɛ den a ɛfa rigidity, light transmission ne thermal insulation ho.

16–20mm Ɔfasu pii

Nneɛma a ɛyɛ den a ɛwɔ ɔfasuo mmiɛnsa, ɔfasuo anan anaa nea wɔahyɛ no den no fata yie ma nnwuma a ɛde insulation a wɔatu mpɔn, stiffness kɛseɛ anaa panel spans atenten di kan. Mmoa ntam kwan a etwa to da so ara gyina krataa no mu duru, sukyerɛmma adesoa, mframa adesoa ne nhyehyɛe a wɔayɛ so.

25–30mm X-Nhyehyɛe anaasɛ Multi-Layer Panels

Wɔayɛ nhyehyɛe ahorow a wɔahyɛ no den a ɛyɛ ntoatoaso pii ama nnwuma a ɛhwehwɛ sɛ wɔde insulation ne stiffness a ɛkorɔn di dwuma. Ɛsɛ sɛ adetɔfo bisa U-botae pɔtee, mpɔtam hɔ mu duru, adesoa pon ne span nyansahyɛ ma profile a wɔapaw no.

Greenhouse Polycarbonate Krataa a Wɔpaw

Hann a Wɔde Kɔma

Ɛsɛ sɛ wɔn a wɔtɔ greenhouse paw krataa kɔla ne sɛnea wɔahyehyɛ no sɛnea nnɔbae hann a wɔhwehwɛ te. Nkratafa a emu da hɔ ma awia hann a wotumi hu no yɛ kɛse, bere a nhyehyɛe a wɔatrɛw anaa opal betumi ama hann a wɔkyekyɛ no brɛoo wɔ baabi a ɛho hia.

Nneɛma a Wɔde Siw Ɔhyew Ho

Mpɛn pii no, wim tebea a ɛyɛ nwini ne adan a wɔde di gua a ɛyɛ hyew a ɛma wim yɛ hyew no nya mfaso fi U-botae a ɛba fam mu. Mfiridwuma ho nsɛm pɔtee a wɔde toto ho ma 8mm, 10mm, 16mm ne multiwall structures a ɛyɛ den no ho wɔ mfaso sen sɛ wɔde toto thickness nkutoo ho.

Condensation a Wɔde Di Dwuma

Ebia greenhouses a wɔtɔn no behia sɛ wɔde baabi a ɛko tia condensation anaasɛ anti-drip surface na ama nsu a ɛtɔ gu fam no so atew na ama nsu a ɛkɔ mu no atu mpɔn. Sɛ saa dwumadie yi ho hia a, kyerɛ no wɔ asɛmmisa no mu sɛdeɛ ɛbɛyɛ a wɔbɛtumi asi so dua sɛ ɛwɔ hɔ na ɛyɛ adwuma ama Wallis abasobɔdeɛ a wɔapaw no.

Ɔfã a UV Abɔ Ho Ban

Wɔ afã biako a wɔde UV abɔ ho ban ho no, ɛsɛ sɛ nea wɔahyɛ no agyirae a UV abɔ ho ban no hwɛ owia no. Sɛ ebia afã abien no nyinaa benya owia ahoɔden tẽẽ a, bisa sɛ ebia UV nhyehyɛe a ɛwɔ afã abien wɔ hɔ ma ade a wɔapaw no anaa.

Hollow Polycarbonate Roofing Panels a Wɔde Di Dwuma

Greenhouse Roofing ne Kuadwuma mu Glazing

Multiwall polycarbonate ka awia hann ne ɔhyew a wɔde siw ano ne nea ɛko tia nsunsuanso bom, na ɛma ɛfata ma aguadidan a wɔde yɛ greenhouses, turo mmeae, nkokoaa dan ne kuayɛ mu glazing adwuma afoforo.

Wim Kanea ne Awia Kanea a Wɔde Yɛ Adan atifi

Fasu pii a ɛyɛ mmerɛw anaasɛ ɛyɛ hann betumi ama awia hann aba adekoradan, adwumayɛbea ahorow, aguadi adan ne atrae adan mu bere a ɛtew emu duru a ɛbata atetesɛm mu ahwehwɛ ho no so.

Pergolas, Abansoro ne Verandas

Wobetumi de kɔbere, opal ne kɔla panels a emu da hɔ, ayɛ pergolas ne abɔnten atrae a wɔakata so a wim tebea ho banbɔ ne awia hann nyinaa ho hia.

Canopies ne Akwan a Wɔde Nantew a Wɔakata So

Polycarbonate a emu yɛ hare a UV abɔ ho ban no ma wonya ɔdan atifi ade a mfaso wɔ so ma abrannaa, akwan a wɔfa so nantew, gyinabea ahorow, sukuu ahorow ne aguadidan ahorow.

Kar gyinabea ahorow

Multiwall PC roofing betumi abɔ kar ahorow ho ban afi osu ne wim tebea tẽẽ ho bere a ɛma abɔde mu hann kɔ beae a wɔakata so no. Wobetumi asusuw kɔbere, opal ne owia-a ɛhwɛ so kɔla ahorow ho wɔ baabi a ɛhaw adwene wɔ hann a ɛhyerɛn ne ɔhyew a ɛkɔ soro ho.

Architectural Cladding ne Mfinimfini Nkyekyɛmu

Wobetumi nso de PC panels a ɛyɛ tokuru adi dwuma wɔ anim a ɛyɛ hann, ɔfasu nhyehyɛe ne afɛfɛde mu mpaapaemu a adwumfo hwehwɛ adan mu nneɛma a ɛyɛ hare a ɛyɛ hann.

Installation Guide for Multiwall Polycarbonate Ɔdan atifi

Fa UV-Protected Side a Ɛhwɛ Abɔnten no hyɛ mu

Sɛ krataa a woapaw no wɔ UV ahobammɔ wɔ ɔfã biako a, fa anim a wɔahyɛ no agyirae pefee a UV abɔ ho ban no hyɛ owia no ho. Mfa sini a ɛbɔ wo ho ban a ɛma wohu no mfi hɔ kosi sɛ wobesi panel no kwankyerɛ so dua.

Fa Hollow Channels no tu mmirika wɔ Roof Slope no Akwankyerɛ so

Mpɛn pii no ɛsɛ sɛ mpampam ne nsuten a ɛwɔ mu no tu mmirika gyina hɔ anaasɛ ɛkɔ baabi a ɔdan no atifi ahwe ase ma enti nsu a ɛyɛ nwini a ɛwɔ nsuten no mu no betumi atwe denam tumi a ɛtwe ade ba fam so sen sɛ ɛbɛkyere.

Fa End Sealing System a Ɛteɛ no di dwuma

Wɔtaa de aluminium teyp a entumi nkɔ mu na ɛkata krataa no atifi ano, bere a wɔde teyp a mframa fa mu anaasɛ ɛma ahome ne awiei profile a ɛne no hyia di dwuma. Ɛsɛ sɛ ɔkwan pɔtee a wɔfa so siw dan atifi no di ɔdan atifi nhyehyɛe a wɔapaw no akyi sɛnea ɛbɛyɛ a mfutuma, nkoekoemmoa ne nsu a ɛboro so renkɔ nsu a ɛwɔ mu no mu.

Fa Ɔdan atifi a Ɛfata Ma

Ɛsɛ sɛ ɔdan atifi a ɛwɔ soro no ma osutɔ nsuo a wotumi de ho to so ne nsuo a ɛyɛ nwini a ɛwɔ mu no kɔ. Sɛnea ɛkɔ fam koraa no gyina ɔdan atifi nhyehyɛe a edi mũ no so; multiwall nhyehyɛe pii a wɔyɛ adwumaden de bɛyɛ 5° anaa nea ɛboro saa di dwuma, bere a nhyehyɛe pɔtee bi hwehwɛ sɛ wɔkɔ fam kɛse. Di engineering ne installation akwankyerɛ a ɛfa profile a woapaw no ho akyi.

Ma kwan ma Ɔhyew Ntrɛwmu

Polycarbonate trɛw na ɛtwetwe bere a ɔhyew sesa no. Ɛsɛ sɛ nkitahodi profiles, fixing holes ne edge clearances ma kwan ma wotumi tu. Ɛnsɛ sɛ nneɛma a wɔde kyekyere krataa no kyekyere krataa no denneennen araa ma ɔhyew a ɛkɔ so no ma ɛyɛ den anaasɛ ɛbɛbɔ.

Nnantew Krataa no So Tẽẽ

Bere a wode rehyɛ na woresiesie no, fa crawling boards, antweri anaa platforms a ɛfata a ɛkyekyɛ nipadua mu duru fa nhyehyɛe a ɛboa no so di dwuma sen sɛ wubegyina hɔ tẽẽ wɔ multiwall panels a enni mmoa so.

Mfomso a Wɔtaa Di wɔ Installation mu a Ɛsɛ sɛ Kwati

• Krataa a UV abɔ ho ban a ɛwɔ ɔfã biako a wɔde besisi hɔ a wɔabɔ no anim.

• Hollow channels a wode besisi hɔ horizontally sɛnea ɛbɛyɛ a condensation rentumi nkɔ.

• Sɛ wɔsɔ ano abien no nyinaa ano koraa a mframa anaa nsu a wɔde fa mu a ɛho hia nni hɔ.

• Silicone, adhesive anaa nneɛma a wɔde kata so a ɛnyɛ nea ɛne ne ho nhyia a wɔde bedi dwuma.

• Fasteners a wɔkyekyere no den dodo na wosiw thermal movement ano.

• Ɔdan atifi a ɛnyɛ nea ɛfata a wɔde bedi dwuma.

• Gyae nsuten a ɛbue a ɛda mfutuma, nkoekoemmoa ne nsuo adi.

• Sɛ wɔantumi ayi abɔnten ahobammɔ film afi hɔ bere a wɔde ahyɛ mu awie no.

• Mmoa ntam kwan a wɔanhwɛ sɛ mframa anaa sukyerɛmma adesoa a ɛwɔ mpɔtam hɔ no bedi dwuma.

Multiwall Polycarbonate vs Ahwehwɛ a Wɔde Si Adan atifi

Kɔla a Wɔpaw ma Ɔdan atifi ne Greenhouses

Wann

Panel a emu da hɔ ma awia hann a ɛkɔ soro sen biara na wɔtaa de yɛ greenhouses, skylights ne nnwuma a abɔde mu hann ne ade titiriw.

Opal / Fitaa a ɛyɛ fitaa

Opal nkratafa ma hann a ɛtrɛw kɛse ne kokoamsɛm a wɔde aniwa hu. Wɔtaa paw wɔn ma canopies, adansi awia hann ne aguadidan atifi.

Kɔbere ne Gray

Ntama a wɔde tinted ayɛ no brɛ hann a wotumi hu ase na ebetumi ama wɔanya baabi a wotumi hu a ɛyɛ sunsuma kɛse ama abrannaa, pergolas, kar gyinabea ne adan atifi adan.

Blue, Green ne Custom Kɔla ahorow

Wobetumi de kɔla multiwall ntama adi dwuma de ayɛ adansi ho nhyehyɛe, ahyɛnsode ne ɔdan atifi a wɔde asiesie. Ɛsɛ sɛ wɔpene kɔla nhwɛsode ahorow so ansa na wɔakra nneɛma pii wɔ baabi a ɛho hia sɛ ɛda adi.

B2B Customization ma Ɔdan atifi ne Greenhouse Nnwuma

• Ɔfasu abien, ɔfasu abiɛsa, ɔfasu anan, ɛwo ne X-nhyehyɛe panels

• Amanneɛ kwan so thickness denam nhyehyɛe so

• Ntrɛwmu a ɛkɔ 2100mm

• Amanneɛbɔ adwuma no tenten

• Nneɛma a wɔde gu mu a wɔayɛ no yiye 5800 / 6000 / 11800 / 12000mm tenten

• Kɔla ahorow a emu da hɔ, opal, kɔbere, bruu, ahabammono ne amanne kwan so

• Nsiesiei ahorow a wɔde UV abɔ ho ban

• Project-specific hann a wɔde ma

• OEM labeling ne nneɛma a wɔde kyekyere nneɛma

• Nhwɛsode nhwehwɛmu

• Bulk distributor ne adwuma no mu nneɛma a wɔde ma

Nsɛm a Ɛho Hia Na Wɔafa Asɛm a Wɔafa Ka a Ɛyɛ Pɛ

• Dwumadi: greenhouse, wim kanea, canopy, pergola, carport anaa facade

• Ɔfasu nhyehyɛe a wɔhwehwɛ

• Nea wɔhwehwɛ sɛ ɛyɛ den

• Ne tɛtrɛtɛ ne ne tenten

• Dodow a wɔhwehwɛ wɔ m⊃2 mu;

• Ahosuo

• Target hann a wɔde mena

• Target U-value, sɛ wɔakyerɛ a

• UV a wɔhwehwɛ wɔ ɔfã biako anaa ɔfã abien

• Anti-condensation ahwehwɛde, sɛ ɛfata a

• Beae a wɔbɛyɛ adwuma no ne wim tebea

• Mframa ne sukyerɛmma adesoa a wɔhwehwɛ

• Support spacing / nhyehyɛe ho mfonini

• Ogya-rating ahwehwɛde

• Nneɛma a wɔde kyekyere nneɛma ne nea wɔde gu ade mu a wɔhwehwɛ

Nneɛma a Wɔyɛ ne Nea Ɛyɛ Paara a Wɔhwɛ So

Multiwall polycarbonate adwumayɛ a ɛkɔ so daa no gyina extrusion su, rib geometry, ɔfasu no mu duru, UV-layer a ɛkɔ so daa ne dimensional control so. Wallis boa nhwehwɛmu a wɔyɛ wɔ B2B ɔdan atifi ne greenhouse a wɔde ma ho.

• Thickness ne dimensional nhwehwɛmu

• Ɔfasu ne mparow nhyehyɛe mu nhwehwɛmu

• UV-layer nhwehwɛmu a wɔyɛ

• Hann a wɔde fa nneɛma mu nhwehwɛmu

• Kɔla a ɛkɔ so pɛpɛɛpɛ nhwehwɛmu

• Nkɛntɛnso-adwumayɛ nhwehwɛmu

• UV onyin ho nhwehwɛmu

• Nneɛma a wɔde kyekyere nneɛma ne nneɛma a wɔde gu mu mu nhwehwɛmu

Wallis Polycarbonate Krataa Adwumayɛbea

Dɛn Nti na Wonya Multiwall Polycarbonate fi Wallis?

Nneɛma a Wɔde Ma a Egyina Factory So

Wallis de extrusion, UV coating, cutting ne export supply ma polycarbonate sheet nnwuma, boa wɔn a wɔkyekyɛ, greenhouse adansifoɔ ne ɔdan atifi adwumayɛfoɔ wɔ nkitahodiɛ a egyina adwumayɛbea so.

Polycarbonate Nneɛma a Wɔahyehyɛ no Pii

Adetɔfo betumi anya ɔfasu abien, ɔfasu abiɛsa, ɔfasu anan, ɛwo, X-nhyehyɛe ne nea ɛfa ho a ɛyɛ den anaa corrugated PC nneɛma ama adwuma no ahwehwɛde ahorow afi adetɔnfo biako hɔ.

OEM / ODM Nneɛma a Wɔde Yɛ Adwuma

Wobetumi aka ne kɛseɛ, ne nhyehyɛɛ, ne kɔla, ne nkratafa nsusuiɛ, ne nneɛma a wɔde kyekyere ne adwuma pɔtee bi ho nsɛm ho asɛm ama nkyekyɛmu nhyehyɛeɛ ne adansiɛ adwuma.

Container-Optimized Nneɛma a Wɔde Kɔ Amannɔne Ntenten

5800 / 6000 / 11800 / 12000mm tenten a wɔkamfo kyerɛ no betumi ama nsukorade a ɛyɛ anammɔn 20 ne anammɔn 40 a wɔde di dwuma no atu mpɔn na ɛtew ntwitwiridii a ɛho nhia ma ɔdan atifi ne greenhouse ahyɛde ahorow so.

Project ne Installation Mmoa

Adetɔfoɔ bɛtumi de adansiɛ ho mfonini, ɔdan atifi nsusuiɛ, wimu tebea ho nsɛm ne adwuma no ahwehwɛdeɛ ama sɛdeɛ ɛbɛyɛ a wɔbɛtumi asusu ne kɛseɛ, nhyehyɛɛ ne krataa a ɛfata ho ansa na wɔakra.

Company Da biara da Dwumadi

Adetɔfo Nsɛm a Wɔka

Nsɛm a Wɔtaa Bisa Fa Multiwall Polycarbonate Nkratafa Ho

Dɛn ne polycarbonate krataa a ɛwɔ afasu pii?

Multiwall polycarbonate yɛ PC panel a wɔayi afi mu a emu adan a ɛyɛ tokuru a mparow atew mu wom. Mframa a ɛwɔ mmeae ahorow no brɛ ɔhyew a ɛkɔ so no ase bere a mpampam no ma ɛboa ɔdan no, na ɛma wonya awia hann a emu yɛ hare a wɔde besisi ɔdan atifi ne ahwehwɛ.

Nneɛma a ɛyɛ den bɛn na Wallis de ma?

Wallis mprempren kwan no kata bɛyɛ 4–30mm ma tokuru ne afasu pii adan . Wɔakyerɛw ɔfasu abien sɛ 4–12mm, ɔfasu abiɛsa 8–16mm, ɔfasu anan 8–20mm, ɛwo a ɛyɛ 6–11mm, ɛwo a ɛwɔ ntoatoaso anum 14–25mm ne X-nhyehyɛe 14–30mm.

Dɛn ne ne tɛtrɛtɛ a ɛsen biara?

Mprempren wɔakyerɛw Wallis hollow ne multiwall adan atitiriw no a ne tɛtrɛtɛ bɛyɛ 2100mm . Si so dua pɛpɛɛpɛ production width ma profile a woapaw no ansa na woahyɛ.

Ntenten bɛn na ɛwɔ hɔ?

Wɔde ne tenten a wɔahyɛ da ayɛ no wɔ hɔ. Wallis kamfo kyerɛ sɛ wɔmfa 5800, 6000, 11800 ne 12000mm nyɛ nneɛma a wɔde gu ade mu a ɛyɛ anammɔn 20 ne anammɔn 40 yiye.

Dɛn ne hann a wɔde fa nnipa mu?

Mprempren Wallis krataafa no kyerɛw bɛyɛ 60–80% a egyina ne kɛse, ɔfasu nhyehyɛe ne kɔla so. Ɛsɛ sɛ wosi hann a wotumi hu a ɛkɔ so pɛpɛɛpɛ no so dua ma nhyehyɛe a wɔapaw no.

Dɛn ne U-bo a ɛwɔ multiwall polycarbonate mu?

Mprempren Wallis kyerɛw bɛyɛ 3.9 kosi 2.3 W/m²·K wɔ 4–16mm nhyehyɛe ahorow a wɔapaw no nyinaa mu. U-boɔ yɛ structure-specific, enti ɛsɛ sɛ adetɔfoɔ bisa boɔ pɔtee a ɛfa thickness ne ɔfasuo geometry a wɔapaw no ho.

Polycarbonate no fã bɛn na ɛsɛ sɛ ɛhwɛ owia no?

Sɛ krataa bi wɔ UV ahobammɔ wɔ ɔfã biako pɛ a, ɛsɛ sɛ nea wɔahyɛ no agyirae a UV abɔ ho ban no hwɛ abɔnten kyerɛ owia. Mfa krataa no nhyɛ mu ansa na woahu ɔfã a wɔabɔ ho ban no.

So Wallis betumi de UV ahobammɔ ama wɔ afã abien no nyinaa?

Sɛ adwuma no hwehwɛ sɛ wɔde owia ahoɔden a ɛwɔ afã abien di dwuma a, kyerɛ UV a ɛwɔ afã abien a wɔhwehwɛ wɔ asɛmmisa no mu. Ɛsɛ sɛ wɔsi so dua sɛ ɛwɔ hɔ ma nhyehyɛɛ a wɔapaw, ne kɛseɛ ne dodoɔ a wɔyɛ.

Dɛn nti na ɛsɛ sɛ nsuten a ɛwɔ tokuru no ne ɔdan atifi a ɛkɔ fam no tu mmirika?

Sɛ wɔde nsu kwan no tu mmirika gyina hɔ anaasɛ ɛsiane ɔdan no atifi a, ɛma nsu a ɛyɛ nwini a ɛwɔ panel no mu no tumi twe denam tumi a ɛtwe ade ba fam no so. Nsu a ɛkɔ soro no betumi akyere nsu ne efĩ.

Ɔkwan bɛn so na ɛsɛ sɛ wɔsɔ multiwall nkratafa no ano a abue no ano?

Ɔkwan a wɔtaa fa so yɛ ɔdan atifi no de aluminium teyp a nsu ntumi nkɔ mu di dwuma wɔ soro awiei ne teyp a mframa fa mu a ɛne no hyia wɔ ase awiei, a wɔde awiei ho nsɛm a ɛfata abɔ ho ban. Di instɔlehyɛn nhyehyɛe a wɔakyerɛ ama krataa ne nneɛma a woapaw no akyi bere nyinaa.

Ɔdan atifi bɛn na wɔhwehwɛ?

Sɛnea ɛbɛyɛ a ɛbɛkɔ fam koraa a ɛfata no gyina nhyehyɛe a wɔde si ɔdan atifi no so. Multiwall nhyehyɛe pii a ɛyɛ adwumayɛfo de kyerɛ bɛyɛ 5° anaa nea ɛboro saa, bere a nhyehyɛe ahorow bi hwehwɛ sɛ wonya ɛnne kɛse. Ɛsɛ sɛ adwuma no mfonini ahorow di nea ɔyɛe no akwankyerɛ a etwa to a ɔde besisi hɔ ne mpɔtam hɔ nsu a wɔde fa mu ho ahwehwɛde ahorow akyi.

So polycarbonate nkratafa trɛw wɔ wim tebea a ɛyɛ hyew mu?

Aane. Polycarbonate trɛw na ɛtwetwe bere a ɔhyew no kɔ so no. Ɛsɛ sɛ ntokuru, profile ne perimeter clearances a wɔde besiesie no ma wotumi kɔ baabiara a ɛfata, na ɛnsɛ sɛ wɔkyekyere fasteners no mu den dodo.

So wobetumi de multiwall polycarbonate adi dwuma de ayɛ afie a wɔde wim yɛ hyew?

Aane. Greenhouses yɛ dwumadie titire no mu baako ɛfiri sɛ multiwall panels ka abɔdeɛ mu hann a wɔde fa mu, ɔhyew a wɔde siw ano, adansi a emu yɛ hare ne abɔnten UV ahobanbɔ bom.

So wɔde biribi a ɛko tia condensation coating wɔ hɔ ma greenhouses?

Mpɛn pii no, aguadi a wɔde yɛ greenhouse adwuma no nya mfaso fi aduru a wɔde ko tia nsu a ɛyɛ nwini anaa nea ɛko tia nsu a ɛtɔ gu fam no mu. Sɛ ɛho hia a, fa ka asɛmmisa no ho sɛnea ɛbɛyɛ a Wallis betumi asi so dua sɛ ɛwɔ hɔ ama multiwall nhyehyɛe a wɔapaw no.

Polycarbonate a ɛwɔ ɔfasu pii a UV abɔ ho ban no tra abɔnten bere tenten ahe?

Wallis mprempren ka ade no ho asɛm sɛ ɛma mfe 10+ abɔnten so kyɛ, bere a ɔsom nkwa betumi ayɛ soronko wɔ UV a ɛda adi, wim tebea, nea wɔde si hɔ, krataa grade ne nsiesie. Si warranty nsɛm a wɔahyɛ da ayɛ no so dua wɔ ade pɔtee a wɔkrae no ho.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Kɔla ahorow a wɔakyerɛw mprempren no bi ne pefee, ɔtare bruu, ahabammono, bruu, opal, fitaa, kɔbere, dwetɛ a ɛyɛ fitaa, kɔkɔɔ ne kɔkɔɔ. Wobetumi asusuw kɔla ahorow a wɔayɛ no sɛnea wɔpɛ ho ama dodow a ɛfata a wɔyɛ.

Dɛn ne MOQ no?

Mprempren ade krataafa no kyerɛ MOQ a ɛyɛ gyinapɛn a ɛyɛ bɛyɛ 1,000m² per thickness and color , bere a wobetumi aka sɔhwɛ nhyehyɛe nketewa ho asɛm. Si mprempren MOQ no so dua ma nhyehyɛe ne nkyerɛkyerɛmu a wɔhwehwɛ.

So metumi abisa nhwɛsode ahorow?

Wallis kratafa a ɛwɔ hɔ mprempren no ka sɛ wobetumi de nhwɛsode ahorow a ne kɛse yɛ A4 ama kwa, na adetɔfo no tua nneɛma a wɔde fa so no. Si nhwɛsoɔ a ɛwɔ hɔ no so dua ma ne kɛseɛ, kɔla ne ɔfasuo nhyehyɛeɛ pɔtee a wɔhwehwɛ.

Ogya dodow bɛn na krataa no wɔ?

Mprempren ade krataafa no kyerɛ B1 ogya adwumayɛ. Esiane sɛ ogya nkyekyɛmu gu ahorow wɔ ɔman ne ɔkwan a wɔfa so sɔ hwɛ mu nti, bisa ogya-sɔhwɛ gyinapɛn pɔtee, amanneɛbɔ ne adansedi krataa a wɔhwehwɛ ma gua a worekɔ no ansa na woakra.

So Wallis betumi ayɛ ne kɛse, sɛnea wɔahyehyɛ ne sɛnea wɔde kyekyere nneɛma?

Aane. Wallis boa OEM ne adwuma-gyina customization ma ɔfasu nhyehyɛe, thickness, trɛw, tenten, kɔla, labeling ne export packaging sɛnea production feasibility.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Fa dwumadie no, ɔfasuo nhyehyɛeɛ, ne kɛseɛ, ne tɛtrɛtɛ, ne tenten, kɔla, dodoɔ, adwuma no beaeɛ, botaeɛ U-boɔ anaa hann a wɔde fa so, UV ahwehwɛdeɛ, anti-condensation ahwehwɛdeɛ, structure loading ho nsɛm ne ahwehwɛdeɛ a wɔde kyekyere nneɛma ma.

Bisa Quote ma Multiwall Polycarbonate Roofing Panels

Worehwehwɛ multiwall polycarbonate sheet manufacturer a wɔde yɛ greenhouses, skylights, pergolas, canopies, carports anaa aguadidan atifi? Wallis de UV-abɔ ho ban hollow PC nkratafa wɔ ɔfasu nhyehyɛe ahorow pii, ne kɛse, kɔla ne amanne export tenten ma B2B nnwuma.

Fa wo nhyehyɛe, ne kɛse, ne nsusuwii, kɔla, dodow, beae a adwuma no wɔ ne ɔhyew anaa hann-nkɔ so ahwehwɛde ahorow mena na woanya nneɛma ho nyansahyɛ a ɛfata ne adwumayɛbea ho nsɛm a wɔakyerɛw.