|
Wallis - PVC fɛrɛ
Wallis ye baara kɛ
PVC fɛrɛ
| Kulɛri: | |
|---|---|
| Hakɛ: . | |
Wallis PVC fomu pankurun ye PVC panɛli gɛlɛn ye min bonyalen don, min dilannen don ka ɲɛsin jɔli ma, kɔnɔna masirili, kogow datugucogo, tilayɔrɔw, kabiniw, jiralikɛnɛw ani fɛn dilanni caman kama. A ka selilabana fomu bɛ dɔ bɔ girinya la ni i y’a suma ni PVC gɛlɛn ye k’a sɔrɔ a bɛ gɛlɛya ni baarakɛcogo sabati min ka kan ka kɛ sow jɔcogo caman na minnu tɛ jɔli ye.
PVC fomu pankurun bɛ ji kunbɛncogo ɲuman di, baarakɛyɔrɔ nɔgɔlen min bɛ se ka baara kɛ ani ka bɛn ni fɛn dilanni taabolo ye min bɛ kɛ tuma bɛɛ i n’a fɔ tigɛ, sɔgɔli, siraw tigɛli, sirili, penti ani sɛbɛnni fɛɛrɛ bɛnnenw. O jogo ninnu b’a to a nafa ka bon baarakɛlaw bolo, panɛli dilannikɛlaw, kabini dilannikɛlaw, sokɔnɔna masiri baarakɛlaw ani sow jɔlifɛnw tilabaga.
B2B jɔli porozɛw kama, pankurun janya, a density, sheet hakɛ, surface finish ani material grade ka kan ka sugandi ka kɛɲɛ ni a gɛlɛya wajibiyalen ye, ka kɛɲɛ ni screw-holding performance ye, machineing method, installation environment ani final application. Kɛnɛma walima tasuma-baarakɛcogo wajibiyalenw ka kan ka fɔ u danma walasa ka se ka kalasi bɛnnen ni sɛgɛsɛgɛli dɛmɛni kunnafoniw dafa sani aw ka komandi kɛ.
PVC fomu pankurun, n’a bɛ wele fana ko PVC pankurun bonyalen walima PVC fomu sɛbɛn, o ye panɛri gɛlɛn ye min dilannen don ni kuloridi polivinili ye ni fomu kɛcogo ye min bɛ selilɛri kɔnɔna jɔcogo dɔ dilan. O kɔlɔlɔ ye pankurun ye min ka nɔgɔn ka tɛmɛ fɛn gɛlɛn kan PVC k’a sɔrɔ a bɛ yɔrɔ sabatilen di hali bi fɛn dilanni ni masirili baara kama.
A ka c’a la, o fɛn bɛ sugandi yɔrɔ minnu na porozɛ dɔ bɛ girinya dɔgɔya, ji min tɛ se ka don, masin dilanni nɔgɔya ani yɔrɔ saniyalen faralen ɲɔgɔn kan. Ka kɛɲɛ ni fɛn dilanni fɛɛrɛ n’a density ye, PVC fomu pankurun suguya wɛrɛw bɛ se ka ɲɛnabɔ ka ɲɛ sɛbɛnni, taamasiyɛnw, kɔnɔna panɛriw, kabiniw, tilayɔrɔw walima fɛn dilannenw na minnu ka gɛlɛn kosɛbɛ.
PVC fomu pankurun ka kan ka jate caman na iko panɛli ni fɛn dilannifɛn sanni ka kɛ jɔli jɔli yɔrɔ fɔlɔ ye. Doni tali wajibiyalenw, tasumako sariyaw ani kɛnɛma sow jɔli sɔnniw ka kan ka jateminɛ tuma bɛɛ danfara la ka kɛɲɛ ni jɔli baara laban ye.
| Specification | Fɛn min ka kan ka Sɛmɛntiya |
|---|---|
| Minɛ | A bɛ bonya / Fomu PVC Board |
| Kulɛri Standard (Kulɛri standard). | Jɛman; kulɛri wajibiyalen wɛrɛw dafa ni Wallis ye |
| A ka bon kosɛbɛ | Aw bɛ pankurun janya wajibiyalenw ɲɛfɔ ka kɛɲɛ ni a gɛlɛya, a dilanni ani a sigili wajibiyalenw ye |
| Hakɛ | Laɲini density walima a kɛcogo laban ɲɛfɔ; density bɛ nɔ bila rigidité, machining ani screw-holding kɛcogo la |
| Sheet Size (sɛbɛnni hakɛ). | Aw bɛ bonya × janya ni muɲuli wajibiyalenw di |
| Baarakɛjɛkulu ka sigicogo | Aw bɛ fomu-bɔri hakɛ wajibiyalenw ni a sanfɛla jɔcogo dafa ka kɛɲɛ ni poroze ye |
| Surface Finish (Sufɛla Fini). | A ka kan ka dafa ni finimugu nɔgɔlen, matte, glossy, laminated walima poroze kɛrɛnkɛrɛnnen wɛrɛw finimugu ye sani aw ka komandi kɛ |
| Fabrikasiyɔn (fabrication). | Tigɛ, sɔgɔli, CNC siraw tigɛli, sirili, penti, sɛbɛnni ani fɛn dilanni taabolo wɛrɛw ka kɛɲɛ ni kalasi ye |
| So kɔnɔ / Kɛnɛma | A sigicogo, UV jiracogo, funteni ani baarakɛwaati makɔnɔnen jira |
| Tasuma-fanga-baarakɛcogo | Aw bɛ tasuma sɛgɛsɛgɛli wajibiyalen walima boon sariya wajibiyalen di ni tasuma-fanga-baara kɛcogo ka kan |
| Sannikɛlaw minnu bɛ kɛ cogoya la | So jɔlifɛnw tilabaga, baarakɛlaw, kɔnɔna pannew dilannikɛlaw, kabini iziniw ani fɛn dilannikɛlaw |
Selilu jɔcogo bɛ dɔ bɔ fɛnw girinya la ka sɔrɔ ka gɛlɛya nafama mara. Panɛli girinya dɔgɔyali bɛ se ka taa ni a tacogo, a minɛcogo, a dilanni ani a sigili nɔgɔya baarakɛminɛnw na, yɔrɔ minnu na PVC sɛbɛn gɛlɛn bɛna masala kunntan dɔ fara a kan.
PVC fomu pankurun tɛ i n’a fɔ jiribolo caman minnu ma furakɛ, olu tɛ a jigi da jirisunw kan minnu bɛ se ka funu nɔgɔya la ji minɛlen kɔfɛ. O b’a to o fɛn in nafa ka bon kɔnɔna sigidaw la, nɛnɛ walima ji sɔrɔli tuma dɔw la, o ye haminanko ye.
Nka, so ɲiginnenw na, kɛnɛma ɲɛda walima fɛn minnu bɛ to ka bɔ kɛnɛ kan, olu fana ka kan ka dilan ka kɛɲɛ ni ji bɔli wajibiyalen ye.
PVC fomu pankurun bɛ se ka baara kɛ ni tigɛ, sɔgɔli, sira ani fɛn dilanni minɛn bɛnnenw ye. O bɛ fɛn dilannikɛlaw ni fɛn dilannikɛlaw dɛmɛ u ka se ka fɛnw dilan minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye, n’u bɛ pannew dilan minnu bɛ kɛ ka kɛɲɛ ni u yɛrɛ sago ye, da wulilenw, masirifɛnw, yɔrɔw ani fɛn dilannenw.
Tablo sanfɛla nɔgɔlen bɛ se ka dɛmɛ don baarakɛcogo la minnu bɛ kɛ ni ja dilanni ye, nizɛri walima ɛkran sɛbɛnni bɛnnen, lamini ani fini fini masirilenw. Surface furakɛli tigitigi ka kan ka bɛn ni finimugu, nɔrɔlan walima sɛbɛnnikɛlan ye min bɛ kɛ.
PVC yɔrɔw ko ka nɔgɔn wa u tɛ penti kɛcogo kɔrɔ kelen de wajibiya walima ji lakanani min bɛ tali kɛ jiri dafabaliw la cogoya la. Saniya fɛɛrɛw ka kan ka sugandi hali bi ka kɛɲɛ ni a sanfɛla fini ye ani nɔgɔ min bɛ o la.
Tablo janya, a density, color, finish ani fabrication fɛɛrɛ bɛ se ka sugandi ka kɛɲɛ ni panneau fini yecogo ni a baarakɛcogo wajibiyalenw ye. O b’a to PVC fomu pankurun bɛnnen don kɔnɔna yɔrɔw baarakɛtaw ni jɔlifɛnw masirilenw bɛɛ ma.
PVC fomu pankurun bɛɛ kɔnɔna jɔcogo, a density walima surface cogoya tɛ kelen ye. Sannikɛlaw ka kan ka baara kɛcogo wajibiyalen dɔn sanni u ka fɛnw sugandi u bonya dɔrɔn fɛ.
Nafa bɛ pankurun minnu na minnu ka dɔgɔn, olu nafa ka bon yɔrɔ minnu na, u girinya ka dɔgɔn, sɛbɛnnikɛcogo ani u tigɛcogo nɔgɔn nafa ka bon ka tɛmɛ juru minɛcogo kan walima panɛri gɛlɛnw kan. Porozɛ minnu bɛ kɛ cogoya la, olu bɛ se ka kɛ jiralanw ye, finimuguw ani kɔnɔnafɛnw yeelenma.
Pankurun minnu ka bon kosɛbɛ, olu bɛ se ka dɔ fara u sanfɛla gɛlɛya ni u gɛlɛya kan, ka ɲɛsin fɛnw ma minnu dilannen don, kabini, yɔrɔw ani baarakɛminɛnw, yɔrɔ minnu na dakun jogo barikama walima sirili baarakɛcogo barikama ka kan ka kɛ.
PVC fomu-bɔri sugu bɛ danfara don tuma caman na fomu hɔrɔnma ni fari denso jɔcogo cɛ i n’a fɔ Celuka suguya pankurun. U bɛ se ka kɛ cogo wɛrɛ la CNC masinw dilanni, sirili, sɛbɛnni ani mebɛri dilanni waati. Ni sigicogo kɛrɛnkɛrɛnnen dɔ wajibiyalen don, i k’o don i ka ɲininkali kɔnɔ sanni i k’a miiri ko PVC pankurunw bɛɛ lajɛlen minnu bonyalen don, olu bɛ se ka ɲɔgɔn falen.
PVC fomu pankurun bɛ se ka kɛ finimugu ye min dilannen don kɔnɔna kogow kama yɔrɔ minnu na, yɔrɔ min ka nɔgɔn, a ka nɔgɔn ani a tɛ ji bɔ, o ka ɲi. Panɛli janya ni a siricogo ka kan ka sugandi ka kɛɲɛ ni kogo hakɛw ni a sigicogo ye.
Fomu pankurunw bɛ se ka don tilayɔrɔw la minnu tɛ jɔli ye, jiralanw tilayɔrɔw ani kɔnɔna tilayɔrɔw. Dɛmɛnanw ni fɛnw sirilanw ka kan ka dilan ka kɛɲɛ ni panɛri hakɛ ye ani ka kɛɲɛ ni gɛlɛya wajibiyalen ye.
Panɛri nɔgɔmanw PVC bɛ se ka dilan ka kɛ sanfɛla ni masiri baara sugandilenw ye yɔrɔ minnu na sigicogo ni sigida sow jɔcogo wajibiyalenw bɛ sira di u baara ma.
PVC fomu pankurun min ka bon kosɛbɛ, o bɛ se ka jateminɛ sanuyaso kabiniw, fɛn marayɔrɔw, etajɛriw ani minɛnw yɔrɔw la, jisuma kunbɛnni ni masinko nafa ka bon yɔrɔ minnu na. Fastener wajibiyalenw ani doni makɔnɔnenw ka kan ka jateminɛ ni u bɛ board density sugandi.
PVC fomu sɛbɛn bɛ se ka tigɛ, ka sɛbɛn walima ka lamini ka kɛ butikiw jiracogo ye, feerekɛyɔrɔw, jiralikɛnɛw ani jagokɛyɔrɔw masirilenw kama.
PVC fomu pankurun finman nɔgɔlen bɛnnen don kosɛbɛ taamasiyɛn dilanni na, panɛri sɛbɛnnenw, sira jiralanw ani porozɛ pankurunw. Sɛbɛnni bɛnkan ka kan ka dafa ni enki ni pankurun yɔrɔ sugandilenw ye.
Panɛri belebelebaw minnu tɛ dɛmɛ sɔrɔ, a ka c’a la, olu bɛ gɛlɛya caman de wajibiya ka tɛmɛ yɔrɔ misɛnnin dilannenw kan. O la, a bonya ni a girinya ka kan ka jateminɛ ɲɔgɔn fɛ ni panɛri hakɛw ye ani dɛmɛnanw ni ɲɔgɔn cɛ.
Porozɛ minnu bɛ kɛ ni juruw, charnières, fittings walima masinw sirilanw ye, olu bɛ se ka kɛ ni grade dennen ye ka tɛmɛ sɛbɛnni ni jiracogo nɔgɔmanw kan. A fɔ Wallis ye pankurun bɛna labɛn cogo min na ani baara bɛna kɛ ni fɛnɲɛnamafagalan minnu ye.
CNC sirako, jatebɔ ani dakun finiw bɛ se ka wajibi wɛrɛw bila selilu jɔcogo n’u density kan. Nafa bɛ misaliw la ni porozɛ dɔ bɛ kunnafoni tigitigiw ɲini minnu bɛ sira kan walima ni dakunw jiralenw ye minnu ka ɲi kosɛbɛ.
PVC fomu pankurun man kan ka fɔ a yɛrɛma i n’a fɔ jirisunw, nɛgɛ, bɛton walima sow jɔli fɛn wɛrɛw minnu dilannen don ni ɛntɛrinɛti ye, olu nɔnabila ye. Panɛriw bɛ doni kɔrɔw ta yɔrɔ minnu na, u lajɛlen bɛɛ ka kan ka labɛn ani ka sɛgɛsɛgɛli kɛ ka kɛɲɛ ni ɛntɛrinɛti ka ɲininiw ye.
| Material | Key Advantage | Jateminɛ nafama |
|---|---|---|
| Panneau en mousse PVC | A ka nɔgɔn, a tɛ ji bɔ ani a dilanni ka nɔgɔn | Density ni thickness bɛ nɔba bila gɛlɛya ni sirili baara la |
| Plywood (Plywood) ye | Masina fanga ɲuman ani juru minɛcogo ɲuman baara caman na | Jiko baara bɛ bɔ jiri suguyaw la, nɔrɔlan ani panɛli hakɛ la |
| MDF ye | A bɛ nɔgɔya ani a bɛ musaka bɔ kɔnɔna minɛnw dilanni na | Grade standardw bɛ se ka kɛ ni ji ye, wa u girinya ka bon ka tɛmɛ fomu board caman kan |
| Solid PVC fɛrɛ | Plastiki solide densité ka bon ani kemikɛli/ji kɛlɛli barikama | A ka gɛlɛn ani a bɛ se ka kɛ ko a man kan porozew la, panɛri nɔgɔman bɛ se yɔrɔ minnu na |
Fɛn min bɛnnen don, o bɛ bɔ jɔli doni na, ji bɔli, a siricogo, dugukolo sanfɛla wajibiyalenw, fɛn dilanni taabolo, tasumako wajibiyalenw ani poroze baarakɛnafolo. PVC fomu pankurun ka kan ka sugandi bawo a jogo kɛrɛnkɛrɛnnenw bɛ bɛn baarakɛcogo ma—a man kan ka kɛ dɔrɔn i n’a fɔ jiri walima nɛgɛ jɔlifɛn bɛɛ nɔnabila diɲɛ bɛɛ kɔnɔ.
PVC fɛnw bɛ se ka kɛ sababu ye ka ji kɛlɛli nafama di, nka kɛnɛma bɛnnenya bɛ fɛn caman de wajibiya ka tɛmɛ ji kɛlɛli kan. Tile yeelen min bɛ to senna, UV yeelen, funteni jiginni, fiɲɛ doni, fɛnɲɛnamafagalanw dilanni ani funteni bonya bɛɛ bɛ nɔ bila kɛnɛma baara kuntaalajan na.
Ni pankurun bɛna bɔ kɛnɛma, aw bɛ waati cogoya, tile yeelen bɔli ani baara waati makɔnɔnen fɔ. Kalanso min dabɔra taamasiyɛnw kama waati kunkurunnin kɔnɔ, o bɛ se ka kɛ ko a ni kɛnɛma boon panɛri min sigilen don kudayi, o wajibiyalenw tɛ kelen ye.
Plastiki pannew bɛ bonya ani ka dɔgɔya ni funteni bɛ Changé. A sigicogo ka kan ka kɛ sababu ye ka fɛnw bɔli ni u siricogo bɛnnenw kɛ yɔrɔ minnu na funteni caman bɛ ɲɔgɔn falen.
Kɛnɛma pankurunw bɛ se ka fiɲɛ degunba sɔrɔ. Board thickness dɔrɔn tɛ sistɛmu baarakɛcogo dantigɛ; karamɔgɔw ni ɲɔgɔn cɛ janya, fɛnw sirilanw ani u sigicogo bɛɛ lajɛlen fana ka kan ka jateminɛ.
Tasuma-baarakɛcogo wajibiyalenw bɛ danfaraba don taamasiyɛnw, minɛnw, kɔnɔna masiricogo ani sow sigicogo labɛnni na. Kumasen jɛlen i n’a fɔ 'fireproof' walima 'flame retardant' man kan ka kɛ fo n’a bɛ bɛn fɛn hakɛ tigitigi ma ani sɛgɛsɛgɛli fɛɛrɛ min bɛ se ka kɛ.
Ni aw ka porozɛ bɛ tasuma danfara kɛrɛnkɛrɛnnen de wajibiya, aw bɛ sariya wajibiyalen di, pankurun janya, a kɛcogo ani a taayɔrɔ suguya di ni aw bɛ kuma Wallis fɛ. Kalanso bɛnnen sɔrɔli ani sɛgɛsɛgɛli sɛbɛnw minnu bɛ bɛn o ma, olu ka kan ka dafa sani o sɛbɛn ka sɔn poroze kama.
PVC fomu pankurun bɛ se ka tigɛ ni jiriforo ni plastiki-dilanminɛn bɛnnenw ye. Baarakɛminɛnw sugandili, tigɛ teliya ani nɛgɛw jateminɛcogo ka kan ka ladilan ka kɛɲɛ ni pankurun janya ni a girinya ye.
CNC sirako bɛ se ka kɛ sababu ye ka cogoyaw, jirisunw, sɛbɛnniw ani panɛli fɛnw kɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Edge wajibiyalenw bɛ se ka nafa sɔrɔ board density la min sugandira kɛrɛnkɛrɛnnenya la sirako ni fɛn dilanni kama.
Pankurunw bɛ se ka sɔgɔ ani ka siri ni masin ye, nka kuru minɛcogo bɛ danfara ka kɛɲɛ ni u girinya, u bonya, u da janya ani u doni ye. Aw bɛ siricogo sugandilen kɔrɔbɔ sani a ka sigi yɔrɔba la.
Nɔrɔli sugandili bɛ bɔ PVC yɔrɔ la, furusiri yɔrɔ ani sigida cogoyaw la. A ka ɲi ka bɛnkan sɛgɛsɛgɛliw kɛ sani u ka kɛ kudayi walima ka u bila.
PVC fomu yɔrɔ nɔgɔlenw bɛ se ka sɛbɛnni ni finiko siraw dɛmɛ minnu bɛ bɛn ɲɔgɔn ma. Yɔrɔ saniyacogo, tintin chimie, penti suguya ani kɛnɛya cogoya ka kan ka sɛgɛsɛgɛ sani a ka kɛ jamaba la.
PVC ye fɛn ye min bɛ kɛ ni thermoplastique ye, nka segin kɛcogo ɲumanw bɛ bɔ sigida lajɛcogo la, pankurun dilanni, nɔgɔ, finiw, nɔrɔlanw ani laminifɛnw. B2B porozɛw kama minnu ka laɲiniw ye sabatili ye, o la, fɛnw lasegincogo ka kan ka jateminɛ i n’a fɔ fɛn dilannenw ni nɔgɔw ladoncogo dafalen dɔ.
PVC fomulen girinya dɔgɔyali ni a bɛ tali kɛ PVC solide la, o bɛ se ka dɔ bɔ polimɛri hakɛ la min bɛ kɛ panɛri la min bonya ye kelen ye, nka sigida baarakɛcogo ka kan ka jateminɛ ni baarakɛcogo dafalen ye, ni baarakɛwaati makɔnɔnen ye ani ɲɛnamaya laban sira minnu bɛ sɔrɔ sanni ka da sabatili fɔlen kelen kan.
Walasa ka kunnafoni dicogo teliyalen sɔrɔ ani ka kuma fɔcogo ɲuman sɔrɔ, aw bɛ se ka:
Tablo janya wajibiyalen don
Sɛbɛn bonya ni a janya wajibiyalen don
Laɲini density, ni a ɲɛfɔra kaban
Kulɛri wajibiyalen don
Surface fini don
Free-foam, Celuka-type walima grade wɛrɛ wajibiyalen, ni a ɲɛfɔra
So kɔnɔ walima kɛnɛma baarakɛcogo
Kogo panɛri, kabini, tilayɔrɔ, taamasiyɛn, mebɛri walima baara laban wɛrɛ
CNC , sɛgɛsɛgɛli, sɛbɛnni, ja walima baarakɛcogo wɛrɛ
A wajibiyalen don ka juru minɛ walima ka a siri baara la
Tasuma sɛgɛsɛgɛli wajibiyalen walima boon sariya, ni o bɛ se ka kɛ
Wajibiyalen UV walima waati baarakɛcogo, ni o bɛ se ka kɛ
Koman hakɛ min bɛ kɛ
Sugu min bɛ taa yɔrɔ la
Export pakew wajibiyalenw
Baara laban dicogo nafa ka bon kɛrɛnkɛrɛnnenya la bawo pankurun nɔgɔman min bɛ sɔrɔ kosɛbɛ, o tɛ sugandi ɲuman ye tuma bɛɛ kabiniw, masinw sirili walima jɔli panɛri belebelebaw.
Wallis bɛ se ka PVC fomu pankurun ɲininiw jateminɛ ka kɛɲɛ ni kiliyan ka baarakɛcogo laban ye, baarakɛcogo ani baarakɛcogo jigiyaw sanni a k’a jigi da kurunba janya dɔrɔn kan.
Sannikɛlaw bɛ se ka laɲini hakɛw, density, surface, fabrication ani installation wajibiyalenw di walasa fɛn dilanni sugandicogo bɛnnenw ka se ka baro kɛ sani u ka kɛ caman ye.
CNC masinw dilanni, sɛbɛnni, sirili, sirili walima fɛn dilanni taabolo kɔrɔ wɛrɛw kama, misali sɛgɛsɛgɛli bɛ se ka dɛmɛ don k’a dɔn ni pankurun ɲɛfɔli sugandilen bɛ bɛn dilancogo laɲininen ma.
Foroko bɛnnenw nafa ka bon walasa ka pankurun nɔngɔnw, u sanfɛyɔrɔw ani u flakɛli lakana u marali ni jamana wɛrɛw ka taa ni u ye. Aw ye palɛti, minɛn ani jiginɛ wajibiyalenw fɔ Wallis ye ni aw bɛ fɛnw cili caman boloda.
PVC fomu pankurunw ka kan ka mara ka taa ni u ye dɛmɛnan fla kan, min sabatilen don walasa ka dɔ bɔ u kɔrɔtacogo la, u dawolo tiɲɛni na walima u sanfɛla sɔgɔsɔgɔli la. Ni poroze minnu bɛ kɛ ka taa jamana wɛrɛw la jamana caman kɔnɔ, pakew dilanni ni minɛnw doni labɛnw ka kan ka bɛn sɛbɛnw hakɛw ma, u hakɛ ani kiliyanw jiginni cogoyaw ma.
PVC fomu pankurun bɛ se ka kɛ kɔnɔna kogo panɛriw ye minnu tɛ jɔli ye, yɔrɔw, kabini yɔrɔw, butikiw, jiralanw, taamasiyɛnw, masirilanw ani boon yɔrɔ wɛrɛw dilannenw. Kalanso bɛnnen bɛ bɔ a bonya, a girinya, a sirili ani a sigida cogoya wajibiyalenw na.
Sugu caman na, PVC fomu board, expanded PVC board ani expanded PVC sheet bɛ kɛ daɲɛw ye minnu bɛ tali kɛ ɲɔgɔn na kosɛbɛ fomu gɛlɛn PVC panɛli fɛnw na. A jɔcogo tigitigi ni a density bɛ se ka ɲɔgɔn ta hali bi kalataw ni ɲɔgɔn cɛ.
PVC fomu pankurun bɛ ni selilɛri fomu ye min bɛ girinya dɔgɔya, k’a sɔrɔ PVC sɛbɛn gɛlɛn bɛ ni fɛn ye min tɛ fomu ye. A ka c’a la, fɛn gɛlɛn PVC ka gɛlɛn, k’a sɔrɔ fomu pankurun ka fisa tuma caman na yɔrɔ minnu na a girinya ka dɔgɔn ani a dilanni nɔgɔya ye fɔlɔfɔlɔw ye.
O fɛn dilanni jɔcogo fila bɛ se ka danfara don u sanfɛla density, kɔnɔna selilɛri jɔcogo ani fɛn dilanni kɛcogo la. Free-foam grades bɛ tali kɛ sɛbɛnni ni jiracogo nɔgɔmanw na tuma caman na, k’a sɔrɔ Celuka suguya pankurunw minnu ka bon, olu bɛ jateminɛ tuma caman na kabiniw, mebɛriw ani panɛri dilannenw kama minnu bɛ surface gɛlɛya caman wajibiya. Aw bɛ jate wajibiyalen dafa ni Wallis ye sani aw ka komandi kɛ.
Aw bɛ density sugandi ka kɛɲɛ ni a kɛcogo laban ye sanni ka sɔngɔ dɔrɔn kɛ. Sɛbɛnni walima jirali porozɛ nɔgɔmanw bɛ se ka kɛ ni wajibi wɛrɛw ye ka bɔ kabiniw la, CNC -yɔrɔ minnu bɛ sira kan, panɛriw sirilen masin na walima jɔli yɔrɔbaw.
Janya ka kan ka sugandi ka kɛɲɛ ni panɛri hakɛw ye, dɛmɛnanw ni ɲɔgɔn cɛ, u gɛlɛyali, u baaracogo, fɛnw sirilanw ani doni minnu bɛ makɔnɔ. Aw bɛ sɛbɛn laban ni panɛli hakɛ wajibiyalen di ni aw bɛ ladilikan ɲini.
PVC fomu pankurun bɛ ji kɛlɛli barikama di wa a tɛ kɛ i n’a fɔ jiribolo min ma furakɛ, o min bɛ minɛ. Nka, kogo, kabini walima kɛnɛma fɛn sigilen dɔ ka jibɔ baara fana bɛ bɔ jogindaw, sirilanw, dakunw, sigilanw ani sigicogo la.
Kɛnɛma baara bɛ bɔ PVC fomu-bɔri hakɛ kɛrɛnkɛrɛnnen na, UV sabatili, waati cogoya, funteni hakɛ, a sigicogo ani baarakɛcogo wajibiyalen. Aw k’a fɔ Wallis ye ko porozɛ in ye kɛnɛma ye walasa ka baro kɛ waati cogoya wajibiyalenw kan minnu bɛ tali kɛ o la sani aw ka komandi kɛ.
PVC fomu pankurun man kan ka fɔ ko tasuma tɛ se ka don diɲɛ bɛɛ kɔnɔ. Ni jɔli baara dɔ bɛ tasuma hakɛ kɛrɛnkɛrɛnnen de wajibiya, aw bɛ sɛgɛsɛgɛli sariya wajibiyalen ni pankurun janya di walasa hakɛ bɛnnen ni sɛbɛnw ka se ka dafa.
Sɔgɔsɔgɔninjɛ, routeur ani drilling baarakɛminɛn bɛnnenw bɛ se ka kɛ ka PVC foam board dilan. Baarakɛminɛnw ni tigɛcogo jateminɛw ka kan ka ladilan ka kɛɲɛ ni pankurun janya ni a girinya ye, ani buguri maracogo lakananenw ka kan ka tugu masinw dilanni senfɛ.
Ɔwɔ, PVC fomu pankurun bɛnnen bɛ se ka CNC sira bila ka ɲɛsin panɛriw, sɛbɛnniw, jirisunw ani yɔrɔw dilannenw ma minnu dilannen don. Ni dakun jiralenw jogo nafa ka bon, aw bɛ laɲini density misali dɔ ɲini sani a ka kɛ jamaba la.
Viru-minɛ baarakɛcogo bɛ bɔ kosɛbɛ kurunba density, thickness, fastener design, edge distance ani applied load. Fɛn minnu ka bon kosɛbɛ, olu bɛ se ka fisaya kabiniw walima fɛnw na minnu sirilen don ni masin ye. Aw bɛ siricogo sugandilen kɔrɔbɔ sani a ka dilan.
PVC fomu pankurun bɛ se ka penta ni finimuguw ye minnu bɛ bɛn ɲɔgɔn ma, nka a nɔrɔli bɛ danfara ka kɛɲɛ ni penti chimie ni pankurun sanfɛla ye. Aw bɛ a yɔrɔ saniya ani ka nɔrɔli sɛgɛsɛgɛli kɛ sani aw ka finimuguba kɛ.
PVC fomu board grade bɛnnenw ɲɛda nɔgɔlen bɛ se ka dɛmɛ don nizɛri, UV walima ɛkran-sɛbɛnni baarakɛcogo la. Imprimante, encre ani surface bɛnkan ka kan ka sɛgɛsɛgɛ sani u ka kɛ jamaba ye.
PVC fomu pankurun bɛ se ka jateminɛ sanuyaso kabini yɔrɔw la k’a sababu kɛ a ka jibɔbaliya ye. Kabini porozew ka kan ka baara kɛ ni density ni thickness ye min bɛ bɛn juruw, charnières, étagères ani masin doni wɛrɛw ma.
A bɛ se ka pankurunw bila jiriw nɔ na baara sugandilenw na yɔrɔ minnu na ji kunbɛnni, girinya dɔgɔyali walima plastiki dilanni cogoyaw nafa ka bon kosɛbɛ. A man kan ka jate i n’a fɔ diɲɛ bɛɛ ka jɔli sinsinni barisa masin fanga ni a siricogo tɛ kelen ye fɛnw ni ɲɔgɔn cɛ.
PVC ye fɛn ye min bɛ kɛ ni funteni ye, nka segin-ka-bɔnye sɔrɔli lakika bɛ bɔ sigida yɔrɔw la, fɛn dilannenw dilanni, nɔgɔli ani ni pankurun in lamininen don, ni pentilen don walima ni a sirilen don fɛn wɛrɛw la. Sannikɛla minnu ka kan ka fɛnw lasegin u cogo kɔrɔ la, olu ka kan ka nɔgɔko sira laɲininen dafa u ka sugu kama.
Porozɛ wajibiyalenw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ ni Wallis ye. Aw bɛ aw ka laɲiniw janya, a bonya, a danfara, a kulɛri, a sanfɛla, a hakɛ ani a kɛcogo laban di walasa a dilanni seko ka se ka jateminɛ.
Ka ɲɛsin jɔli kura, kabini, CNC , sɛbɛnni walima fɛn dilanni porozɛw ma, misali jateminɛni bɛ ladilikan di walasa aw ka se ka masinw, dugukolo cogoya, sirili ani finiw kɔrɔbɔ sani aw ka sanni kɛ caman na.
Aw ye a janya, a sɛbɛnfura hakɛ, a density ni a dɔnna, a kulɛri, a sanfɛla fini, a hakɛ, a kɛcogo, a kɛcogo, so kɔnɔ walima kɛnɛma, baarakɛcogo, tasuma walima UV wajibiyalenw ani taayɔrɔ suguya di. O bɛ Wallis dɛmɛ ka poroze jateminɛ ani ka kuma fɔlen dɔ labɛn min bɛ tiɲɛ kosɛbɛ.
