|
PVC PE PVDC ye
WALLIS
| Fɛn min bɛ kɛ: | |
|---|---|
| Kulɛri: | |
| nafa: | |
| Hakɛ: . | |
Wallis bɛ furaw foroko filimu ni sɛbɛn gɛlɛnw di minnu bɛ se ka barika sɔrɔ kosɛbɛ PVC /PE/PVDC, ka ɲɛsin kurukuruw ma minnu dilannen don ni funteni ye, furakisɛw, furakisɛw, jeli nɔgɔlenw, balofɛnw ani fɛn wɛrɛw minnu bɛ se ka kɛ ni ji walima oksizɛni ye. Layɛrɛ caman jɔcogo bɛ PVC thermoforming support, PE functional layer ani PVDC barikalan coating fara ɲɔgɔn kan walasa ka formability (dafalen) kɛcogo ɲɛ, ka sigicogo ɲuman di ani ka lakana di ji ni oksizɛni tali ma.
Ni an y’a suma ni PVC walima PVC /PVDC jɔcogo kɔrɔw ye, PE layini faralen bɛ se ka sɛgɛsɛgɛli ni baarakɛcogo ɲɛ ka ɲɛsin kurukuru juguman walima yɔrɔ jan sugandilenw ma, ka sɔrɔ fana ka sigicogo baarakɛta di pakew dilanni siraw kɔnɔ minnu dilannen don ka ɲɛ.
Fɛn minnu bɛ sɔrɔ, olu ye a janya bɛɛ lajɛlen ye 50–400 μm ɲɔgɔn ye , PVDC dacogo girinya bɛ se 60–120 g/m⊃2 ma; , ani a bonya danmadɔw bɛ se milimɛtɛrɛ 250–350 ma , ni jɔcogo, bonya, kulɛriw ani rollo cogoyaw bɛ sɔrɔ ka kɛɲɛ ni u dilanni dafalen ye.
Furakɛcogo la, a jɔcogo laban ka kan ka sugandi ka kɛɲɛ ni fura ka ji ni oksizɛni sɛgɛsɛgɛli ye, ka kɛɲɛ ni WVTR ni OTR laɲini ye, kurukuruw kɔnɔna jateminɛcogo, a dilanni cogoyaw, a datugulan, a datugulan finɛtiri, a sabatili porogaramu ani a taayɔrɔ-sugu sariyaw.
PVC /PE/PVDC ye furaw foroko dilanni ye min bɛ se ka kɛ ni funteni ye, min dilannen don walasa ka polimɛri layini saba danfaralenw baarakɛcogo nafaw fara ɲɔgɔn kan. Sani a ka kɛ polimɛri kelen ye walasa ka gɛlɛya, sɛgɛsɛgɛli, sigili ani barika baarakɛcogo di waati kelen na, layini kelen-kelen bɛɛ bɛ baara wɛrɛ kɛ.
PVC gɛlɛn bɛ dimension sabatili ni thermoforming structure fɔlɔ di. A bɛ kɛ sababu ye ka ɛntɛrinɛti sumaya ka kɛ furakɛli kurukuruw ye ka sɔrɔ ka gɛlɛya di min ka kan ka kɛ duguma pakew dilanni baara la.
PE layɛrɛ bɛ sɛgɛsɛgɛli wɛrɛw don a la, wa a bɛ se ka baarakɛcogo ɲɛ ka taa a fɛ blister caman jɔli la. Ka kɛɲɛ ni a jɔcogo kɛrɛnkɛrɛnnen ye, PE bɛ se ka baara kɛ fana i n’a fɔ sigilan ni datugulan fɛnw ye minnu bɛ bɛn ɲɔgɔn ma.
PVDC bɛ baara kunba di min bɛ kɛ ni barikalanba ye, a kɛtɔ ka ji-ji, oksizɛni ani gazi tali dɔgɔya. Datugulan girinya bɛ se ka ladilan ka kɛɲɛ ni barika laɲini ye, nka a laban kɛcogo fana bɛ bɔ PVDC dilanni na, finimugu kelen-kelen, a dilanni cogoyaw ani kurukuruw jateminɛcogo dafalen.
Nin nafa ninnu bɛ fɛnw jira minnu bɛ sɔrɔ cogoya la. Dimension muɲuli labanw, layɛrɛ hakɛw, barika baarakɛcogo ani roll configuration ka kan ka dafa furakɛli porozɛ kelen-kelen bɛɛ la.
| Paramɛtiri | Typique Specification / Kɔlɔsili |
|---|---|
| Ka kɛ | PVC /PE/PVDC Furakɛcogo blister film min bɛ barika caman sɔrɔ |
| Fɛnɲɛnɛmaw jɔcogo | PVC / PE / PVDC caman bɛ ɲɔgɔn sɔrɔ |
| Total Thickness (A bɛɛ lajɛlen). | A bɛ Taa 50–400 μm ɲɔgɔn na; ka kɛɲɛ ni poroze ka ɲininiw ye |
| PVDC ka finimugu girinya | A bɛ se ka kɛ 60–120 g/m²; sugandili laban ka kɛɲɛ ni barika laɲini ye |
| Bonya min bɛ kɛ cogoya la | A bɛ Taa milimɛtɛrɛ 250–350 ɲɔgɔn na; bɔgɔdaga minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ka kɛɲɛ ni u dilanni dafalen ye |
| Format de fourniture | Rolls (Rollo)w |
| Ɲɛ | Kulɛri minnu bɛ ye, minnu bɛ tintin ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye |
| Termoforming (sɛnɛfɛnw sɛnɛcogo). | Sigida bɛnnenw bɛ se ka jateminɛ ka ɲɛsin kurukuruw ma minnu bɛ kɛ cogoya la, minnu ka dun ani minnu ka bon |
| PE Baarakɛcogo Layɛrɛ | A bɛ dɛmɛ don fɛn caman sɛgɛsɛgɛli, baarakɛcogo ani poroze kɛrɛnkɛrɛnnenw sigicogo wajibiyalenw na |
| Barrière Performance (Barikɛla ka baarakɛcogo). | Ji ka ca ani oksizɛni barika; laɲini WVTR ni OTR jira ni sɛgɛsɛgɛli cogoyaw ye |
| Ɲɛkisɛ Yecogo | A jɛlen don walima a ɲɛ bɛ kɛ ka kɛɲɛ ni fɛnw dilanni ye |
| Aplikasiw (applications) minnu bɛ kɛ | Kisɛw, furakisɛw, jeli nɔgɔlenw, balofɛnw ani furakɛli kurukuruw kɛcogo sugandilenw |
| Ka kɛɲɛ ni mɔgɔw sago ye | Layer ratio, total thickness, PVDC coating weight, roll width, color ani roll configuration |
PVC /PE/PVDC Furakɛcogo
PVC /PE/PVDC Furakɛlaw ka foroko
Danfaraba min bɛ PVC /PVDC ni PVC /PE/PVDC cɛ, o ye PE layini faralen ye. O bɛ se ka fɛn in kɛcogo Changer thermoforming, impact ani sealing baara waatiw la.
PE bɛ se ka wuli ka tɛmɛ PVC gɛlɛn kan . Ni aw ye PE layɛrɛ kɔrɔsilen dɔ fara a kan, o bɛ se ka fɛn caman sigicogo gɛlɛya ɲɛ, wa a bɛ se ka kɛ nafa ye yɔrɔ min na, kurukuru dafalen bɛ fɛn caman tigɛli wajibiya ka tɛmɛ PVC /PVDC sigicogo gɛlɛn kɔrɔlen kan.
PVC /PE/PVDC bɛ jateminɛ ka caya kurukuruw dilanni na minnu kɔnɔna ka dun walima minnu ka bon, yɔrɔ minnu na a dilanni kɛcogo ka ɲi. Kɔnɔna seko lakika bɛ bɔ a janya bɛɛ lajɛlen na, a layini hakɛ, a funteni cogoya ani a baarakɛminɛnw.
PE sanfɛla bɛ sen don sigili la yɔrɔ minnu na, PE hakɛ tigitigi ka kan ka bɛn aliminiyɔmu papiye laɲinilen ma, polimɛri datugulan filimu walima furuɲɔgɔnma wɛrɛ. Siginidenw ka baarakɛcogo ka kan ka tiɲɛ i n’a fɔ sigida dafalen.
Layɛrɛ flexible wɛrɛ bɛ se ka nɔ bila impact behavior ni dimensional stability la. Foroko injiniyɛriw ka kan ka laminati yɛrɛ jateminɛ sanni u ka baarakɛcogo jateminɛ ka bɔ polimɛri kelen-kelen bɛɛ ka jogo dɔrɔn na.
PVDC dacogo girinya ye fɛnba dɔ ye min bɛ kɛ ni PVC /PE/PVDC barikalan jɔcogo dilanni ye. Ni dɔ farala PVDC dacogo kan, a ka c’a la, o bɛ se ka dɔ bɔ ji-dafalen ni oksizɛni tali la, nka finimugu girinya dɔrɔn man kan ka kɛ barika hakɛ ɲɛfɔli laban ye.
Datugulan-gɛlɛya ɲɛfɔli min ka dɔgɔn, o bɛ se ka lakana bɛrɛbɛrɛ di furakɛlifɛnw ma minnu bɛ barika bonya kosɛbɛ ka tɛmɛ sariya PVC kan ka sɔrɔ ka sɔrɔko foroko jɔcogo mara.
Cɛmancɛ finimugu girinyaw bɛ se ka jateminɛ baarakɛcogo la minnu bɛ ji ni oksizɛni lakanani barikama wajibiya, ka kɛɲɛ ni kiliyan ka sabatili ni barika ɲininiw ye.
Datugulan girinya minnu ka bon, olu bɛ se ka barika barikama di PVC /PE/PVDC denbaya kɔnɔ. Nka, baarakɛminɛn minnu bɛ WVTR dɔgɔya kosɛbɛ, olu bɛ se ka mago don hali bi ka suma ni PVDC ye min barika ka bon kosɛbɛ, PC TFE-based walima cold-form aluminium structures.
Fila 90 g/m² walima garamu 120/m² fɛnw bɛ se ka barika sɔrɔcogo wɛrɛw bɔ k’a sababu kɛ danfara ye PVDC chimie la, coating uniformity, substrate, PE layer ani thermoforming conditions. O la, fura sanbagaw ka kan ka barika hakɛ sumanilenw ɲini sanni u ka u jigi da finimugu girinya dɔrɔn kan.
WVTR bɛ jisuma hakɛ suman min bɛ tɛmɛ pakew fɛ cogoya ɲɛfɔlenw kɔnɔ. Furakɛcogo minnu bɛ ji sɔrɔ walima minnu bɛ ji sɔrɔ, a ka ca a la, olu bɛ WVTR dɔgɔya.
OTR bɛ oksizɛni tali suman ni fɛn caman ye. Fɛn minnu bɛ se ka oksidan sɔrɔ, olu bɛ se ka OTR hakɛ dɔgɔmanw de wajibiya, o min ye u ka foroko ɲɛfɔcogo dafalen dɔ ye.
WVTR ni OTR hakɛw ka kan ka suma dɔrɔn ni funteni, nɛnɛ hakɛ, misali girinya ani sɛgɛsɛgɛli kɛcogo dɔnna. Barika hakɛ minnu bɛ suman cogoya wɛrɛw la, olu tɛ se ka suma ɲɔgɔn ma k’u ɲɛsin ɲɔgɔn ma.
Thermoforming bɛ fɛn caman sɔgɔ, kɛrɛnkɛrɛnnenya la, dingɛ kɔnɔna na ani kɛrɛfɛ kogow la. Ni fura minnu ka gɛlɛn kosɛbɛ, barika sɛgɛsɛgɛli ka kan ka jateminɛ kɛ kurukuruw kɔnɔna dafalen na barisa filimu fla baara bɛ se ka kɛ a tɛ yɔrɔw jira minnu dilannen don ka tɛmɛ tɔw bɛɛ kan.
Fura dasirili min bɛ se ka da a kan, o bɛ bɔ duguma-yɔrɔ ni datugulan faralen ɲɔgɔn kan dafalen na. A man kan ka miiri ko PVC /PE/PVDC jɔcogo kelen bɛ datugu ka ɲɛ cogo kelen na aliminiyɔmu papiye walima furakɛli dakun filimu bɛɛ la.
Aluminiyɔmu datugulanw bɛ baara kɛ ni funteni-datugulanw ye minnu tɛ kelen ye. Sannikɛlaw ka kan ka papiye ɲɛfɔli tigitigi di walasa ka bɛn ni PE walima sigilan wɛrɛ ye, o ka se ka jateminɛ.
Sigilan funteni bɛ bɔ fɛn dilannenw cogoya la, a datugucogo, a sigi waati, a degun ani a layini teliya. Laɲini ka kan ka kɛ ka fɛn dilanni finɛtiri sabatilen sigi sen kan sanni ka laboratuwari funteni kelen sigi sen kan.
Fɛnɲɛnɛma walima sigilan fanga ka kan ka jateminɛ ka kɛɲɛ ni kiliyan ka foroko ɲɛfɔcogo ye, fɛn dilannenw faralen ɲɔgɔn kan ani u sirilen kɔfɛ fɛn dilanni cogoyaw la minnu bɛ mɔgɔ jira.
Finished blister qualification ka kan ka kanw, jibɔ, sigilanw tiɲɛni ani pakew dafalen jateminɛ u dilanni, u tacogo ani u maracogo makɔnɔnenw na.
Kun dɔ min na furakɛlikɛlaw bɛ PVC /PE/PVDC jateminɛ sanni ka PVC /PVDC sigicogo nɔgɔman ta, o ye mago ye ka dilancogo ɲɛ ka taa a fɛ dingɛ belebelebaw walima dingɛ jugumanbaw kɔnɔ.
Ni dɔ farala dingɛ juguman kan, o bɛ dɔ fara sigida sɔgɔli kan ani ka fɛnw girinya dɔgɔya kɛrɛfɛ kogow ni nkɔni na. Sannikɛlaw ka kan ka kɔnɔna juguya yɛrɛ ni a jateminɛcogo di fɛnw sugandili waati.
Fura minnu ka bon, olu bɛ se ka kɛ sababu ye ka funteni ni u dilanni cogoya wɛrɛw de wajibiya ka bɔ furakisɛw kɔnɔ minnu bɛ kɛ ka caya. O la, fɛn dilannenw hakɛ ka kan ka don RFQ kɔnɔ.
So funteni finɛtiri ka kan ka sira di PVC /PE bɔgɔlan bɛrɛbɛrɛ ma k’a sɔrɔ a ma dɔgɔya kojugu, ka delamination walima tiɲɛni kɛ barika dacogo la.
Ni ji bɛ fɛn minnu na, dingɛ dafalen ka kan ka jateminɛ bawo barika baara bɛ bɔ PVDC layini ka to cogo kelen na ka ɲɛ a dilanni kɔfɛ.
Rotary systems bɛ se ka kɛ ni web balo sabatilen ye, ka roll tension kɔrɔsi, ka so funteni kelen ani ka fɛnw janya cogo basigilen na. Rollo bonya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu ka kan ka bɛn masin cogoya yɛrɛ ma.
Flat-bed systems bɛ baara kɛ ni funteni ni fɛn dilanni sɛrɛkili suguya wɛrɛw ye. O la, fɛnw ka setigiya ka kan ka kiliyan ka baarakɛcogo lakikaw lasegin.
Layini teliyaba bɛ dɔ fara nafa kan ka wuli ka wuli cogo basigilen na, ka kɛ fla ye, ka jateminɛ kɛ, ka funteni jaabi, ka finɛtiri ni sigilan finɛtiri dilan. A bɛnnen don ka kan ka dafa masin tigitigi kan sanni ka miiri ka bɔ 'teliyaba bɛ se ka bɛn.' daɲɛ ma.
| Structure | Nafa fɔlɔ | Sugandili cogoya cogoya |
|---|---|---|
| Kɛnɛya PVC | Sɔrɔko siratigɛ la, thermoforming (sɔgɔsɔgɔninjɛ). | Ka ɲɛsin furakɛlicogo ma minnu na PVC barikalan jɔnjɔn bɛ se |
| PVC /PE ye | Fɛnɲɛnɛmafagalanw ni sigili baarakɛcogo ɲɛnabɔlen | Ka ɲɛsin porozɛw sigili n’u sigili ma minnu tɛ PVDC barika barikamaw wajibiya |
| PVC /PVDC ye baara kɛ | Ji ni oksizɛni barikalan | Walasa ka furakɛli kurukuruw sɔrɔ minnu bɛ kɛ ka caya |
| PVC /PE/PVDC ye baara kɛ | Barrière plus enhanced multilayer forming flexibilité | Nafa bɛ a la yɔrɔ minnu na barika ni thermoforming ɲinini minnu ka dun walima minnu ka bon, olu ka kan ka bɛn ɲɔgɔn ma |
| Super-High-Barrière PVDC ye | Ji ni gazi lakanani barikama bɛ sɔrɔ kurukuruw kɔnɔ minnu bɛ yeelen bɔ | Aw bɛ jateminɛ kɛ ni PVDC dacogo jɔnjɔn tɛ WVTR / OTR wajibiyalenw dafa |
| PC Filimu min sinsinnen bɛ TFE kan | Ji barikalan min ka bon kosɛbɛ | Ka ɲɛsin furaw ma minnu bɛ ji sɔrɔ kosɛbɛ, minnu bɛ ji-la-banakisɛ lakanani barikama de wajibiya |
| Aluminiyɔmu min bɛ kɛ ni nɛnɛ ye | Yeelen, ji ani gazi lakanani ka bon kosɛbɛ | Aw ye jateminɛ kɛ yɔrɔ minnu na kɛnɛyako tɛ mako ɲɛ ani barika maksimali de ye fɔlɔ ye |
Fɛn min ka fisa, o tɛ otomatiki ye min ka barika ka bon kosɛbɛ. Fura dilanni injiniyɛriw ka kan ka sigicogo sugandi min bɛ sabatili wajibiyalenw wasa ka sɔrɔ ka foroko kɛcogo bɛnnen mara, masin baarakɛcogo ɲuman, pakew hakɛ ani pakew musaka bɛɛ lajɛlen.
PVDC bɛ ji lakanani ɲɛ kosɛbɛ ni i y’a suma ni PVC gansan ye, o bɛ kɛ sababu ye ka filimu caman kɛ furaw la, yɔrɔ minnu na nɛnɛ bɔli ye sabatili haminanko nafama ye.
PVDC fana bɛ dɔ bɔ oksizɛni ni gazi tali la, o b’a to fɛn in bɛ se ka jateminɛ kɛ walasa ka furaw sɔrɔ minnu bɛ se ka oksidan sɔrɔ.
PVC /PE basigi bɛ se ka sɛgɛsɛgɛli wɛrɛw di ni i y’a suma ni PVC jɔcogo gɛlɛn kɔrɔlen ye, o bɛ se ka dɛmɛ ni a bɛ dingɛ jugumanw walima dingɛ belebelebaw bɔ.
Fɛn jɛlenw bɛ a to furakisɛw ni furakisɛw bɛ to ka ye walasa ka sɛgɛsɛgɛli kɛ ka sɔrɔ u bɛ barika barikama di ka tɛmɛ PVC jɛlen kan.
A janya bɛɛ lajɛlen, PE layini, PVDC dacogo girinya, a bonya ani a kulɛri bɛ se ka baro kɛ ka kɛɲɛ ni kiliyan ka blister dilancogo ni a foroko sira ye min bɛ sen na.
PVC /PE/PVDC bɛ se ka jateminɛ furakisɛw la minnu bɛ ji ni oksizɛni lakanani caman wajibiya ka tɛmɛ PVC sariyalen kan ka sɔrɔ ka kurukuruw foroko jɛlenw mara minnu dilannen don ni funteni ye.
Kapisilɛriw ni jeli nɔgɔlenw bɛ se ka kɛ sababu ye ka kurukuruw bɔ minnu ka bon walima minnu ka dun. PE layɛrɛ min farala a kan, o bɛ se ka PVC /PE/PVDC kɛ sugandi ye min nafa ka bon ka jateminɛ kɛ yɔrɔ min na, foroko ni barika baarakɛcogo fila bɛɛ wajibiyalen don.
Witaminiw, balodɛsɛbanakisɛw ani fura wɛrɛw minnu bɛ ji walima oksizɛni sɔrɔ, olu bɛ se ka jateminɛ ni PVC /PE/PVDC ye ni barikalan baarakɛcogo sumanlen bɛ fura dilannen sabatili wajibiyalen dafa.
PVDC basigilen kurukuruw jɔcogo bɛ tali kɛ furaw dilanni na minnu bɛ nɔ bila nɛnɛ na. Datugulan girinya ni a jɔcogo wajibiyalen ka kan ka sinsin sabatili sɛgɛsɛgɛli kan sanni ka kɛ 'bariyɛriba' tɔgɔdacogo bɛɛ lajɛlen ye.
O fɛnw bɛ se ka jateminɛ fana sɛgɛsɛgɛli ni kɛnɛyako pakew kɛcogo sugandilenw kama, yɔrɔ minnu na, u dilanni, u datugucogo, u ka fɛn dilannenw ni ɲɔgɔn cɛ ani u balilanw bɛ bɛn sigicogo setigi ma.
Furakɛcogo Blister Packs
Kɛnɛyako pakew kɛcogo
PVC /PE/PVDC man kan ka fɔ ko a bɛ bɛn furakɛlicogo bɛɛ ma diɲɛ bɛɛ kɔnɔ. A bɛnnen don, o bɛ bɔ layini min na, o bɛ tali kɛ fura pake la ani fura in kemikaliya, a dacogo, a faralenw ani a maracogo.
Kisɛw ni furakisɛw ka kan ka jateminɛ ka kɛɲɛ ni ji hakɛ ye, oksizɛni hakɛ, yeelen hakɛ ani sabatili dafalen.
Yɔrɔ minnu na PVC /PE/PVDC pake caman tigɛli jateminɛna muguw walima granules kama, a facogo tigitigi ni a datugucogo ka kan ka lajɛ barisa blister roll specifications kɔrɔlenw bɛ se ka kɛ u tɛ bɛn tigitigi sachet walima flexible-pouch wajibiyalenw ma.
Foroko minnu bɛ kɛ ni barika caman ye, olu bɛ se ka dɔ bɔ sigida laminiko la, nka a tɛ a yɛrɛma garanti di fɛn kɛrɛnkɛrɛnnen dɔ marali waati ma. Waati laban waati ka kan ka sigi senkan fura dilannikɛla ka sabatili porogaramu fɛ min sɛgɛsɛgɛra ni pakew dilanni sira dafalen ye.
Layɛrɛ caman janya sabatili bɛ dɛmɛ ka funteni min bɛ se ka fɔ ka ɲɛ, o mara, ka kɔnɔnatumuw jɔ, ka wuluwuluw minɛ ani ka kurukuruw fanga ban.
Coating consistency nafa ka bon barisa sigida caman ɲɔgɔnna bɛ se ka nɔ bila furakɛli kuru dafalen ka barika baara la.
PVC /PE/PVDC laminati ka kan ka a ni ɲɔgɔn cɛ nɔrɔli bɛrɛbɛrɛ mara a sirili, a sɔgɔli, a sumaya ani a thermoforming waati. Kɔrɔbɔli minnu bɛ kɛ ni kɔnɔna jugumanw ye, olu ka kan ka kɛ ni sɛgɛsɛgɛli ye walasa ka a dɔn ni delamination tɛ.
Barika sɛgɛsɛgɛli ka kan ka tugu sɛgɛsɛgɛli kɛcogo ni sigida cogoyaw la minnu bɛnna furakɛli kuntigi fɛ.
Fɛn jɛlenw ka kan ka lajɛ ni nɔgɔ tɛ u la, ni u bɛ sɔgɔsɔgɔ, ni u datugulen don, ni u dacogo tiɲɛna, ni u ye jeliw ye walima ni u ɲɛna ko wɛrɛw tɛ minnu bɛ se ka nɔ bila baarakɛcogo la walima ni u foroko cogoya ye.
Sigili kɛcogo ka kan ka jateminɛ ni datugulan yɛrɛ ye barisa dugumalan dɔrɔn tɛ se ka pake laban sigicogo fanga sigi sen kan.
Furakɛcogo dɔnniya ka kan ka baara kɛ ni sɛbɛnw ye minnu bɛ tali kɛ PVC /PE/PVDC hakɛ tigitigi la min bɛ san. Daɲɛw bɛɛ lajɛlen i n'a fɔ 'pharma grade' man kan ka bila fɛɛrɛko ɲɛfɔli yɛrɛyɛrɛ seginni nɔ na, batch sɛbɛnw ani destination-market requirements.
TDS ka kan ka fɛnw jɔcogo, u janya bɛɛ lajɛlen, u laminiko ɲɛfɔli minnu bɛ tali kɛ o la, u bonya, u wulicogo ani u baarakɛcogo minnu bɛnna bɛnkanw kan, olu jira.
Jagokɛlaw ka kan ka sɛbɛnw ɲini minnu bɛ kɛ ka ɲɛsin batch kɛrɛnkɛrɛnnenw ma, minnu bɛ kuma paramɛtiriw kan, bɛnkan minnu kɛra sanniko ɲɛfɔli dafalen kɔnɔ.
PVC ni PVDC ka kunnafonisɛbɛnw danfaralenw bɛ sɔrɔ walasa ka lajɛ. Ikomi fɛn dilannen ye PVC /PE/PVDC faralen ye, sannikɛlaw ka kan k’a jira ni nin sɛbɛnw bɛ tali kɛ fɛn caman hakɛ tigitigi la, wa u ka kan ka fɛn laban sɛbɛn bɛnnenw ɲini setigiya waati.
Kɔrɔbɔli sɛgɛsɛgɛli ka kan ka kɛ sani aw ka furakɛli kurukurunin dɔ Changer, ka PVDC finimugu girinya ladilan walima ka fɛn in bila foroko sira wɛrɛ la.
Aw bɛ kɔnɔna ɲɛfɔli, fɛn finman, fin, kari, delamination ani web kɛcogo jateminɛ ni blister baarakɛminɛn yɛrɛ ye.
Aw bɛ a lajɛ ni sigida sugandilen bɛ barika laɲini wajibiyalen dafa sɛgɛsɛgɛli cogoyaw la minnu kofɔlen don furakɛli kuntigi fɛ.
Aw bɛ filimu datugu ni a dilanni datugulan lakika ye ani ka funteni, degun ani sigi waati finɛtiri min bɛ sɔn ka kɛ, o sigi sen kan.
Aw ye ɛntɛrinɛti nɔfɛtaama, roll unwinding, forming consistency, sealing, cutting ani masin bɛɛ ka baarakɛcogo ɲuman lajɛ ni jago teliya jiralen ye.
Foroko suguya sugandilen ka kan ka don fura dilannikɛla ka sabatili ni foroko-sɛnɛ porogaramu kɔnɔ sani jago maracogo fɔlenw ka sigi sen kan.
Laminati janya bɛɛ lajɛlen bɛ se ka sugandi ka kɛɲɛ ni kɔnɔna hakɛw ye, a gɛlɛya, a dilanni wajibiyalenw ani a foroko kɔnɔfɛnw cogoya minnu bɛ yen.
Yɔrɔ minnu na PE layini janya walima a sigicogo nafa ka bon, aw bɛ sigicogo kɔrɔ walima baarakɛcogo laɲinitaw di walasa ka fɛɛrɛ jateminɛ.
PVDC dacogo sugandilenw bɛ se ka kɛ 60–120 g/m². Sugandili ka kan ka tali kɛ WVTR, OTR ani blister baarakɛcogo dafalen wajibiyalenw na.
Rollo bonya bɛ se ka ladilan walasa ka bɛn kiliyan ka thermoforming machine ni blister labɛncogo ma fɛn dilanni seko minnu bɛ sɔrɔ.
Sannikɛlaw ka kan ka core diameter, maximum roll diameter, roll weight, winding direction, splice limitations ani labeling requirements di.
Kulɛri jɛlenw ni tintinw bɛ se ka baro kɛ ka kɛɲɛ ni marka, fɛn dilannenw dɔnni ani yeelenko ɲɛnabɔli wajibiyalenw ye. Furakɛcogo yeelen sabatili nafa ka bon yɔrɔ minnu na, yeelenbɔcogo minnu bɛ se ka suman, olu ka kan ka fɔ u danma.
Aw bɛ a dɔn ni fura in ye furakisɛ ye, ni furakisɛ ye, ni jeli nɔgɔlen ye, balodɛsɛbanakisɛ walima fura tata hakɛ wɛrɛ ye ani ka a jira ko a ka teli ka kɛ ji, oksizɛni walima yeelen ye.
Ni aw bɛ feerekɛla wɛrɛ bila a nɔ na, aw bɛ PVC /PE/PVDC fɛɛrɛbɔsɛbɛn min bɛ yen walima kunnafonisɛbɛn dɔ di.
Aw bɛ a janya bɛɛ lajɛlen ɲɛfɔ ani PVC / PE / PVDC layɛrɛ wajibiyalenw yɔrɔ minnu sigilen don kaban.
Aw bɛ finimugu girinya min bɛ yen walima barika laɲini wajibiyalen di ni aw mago bɛ Wallis la walasa ka PVDC sɛgɛsɛgɛli bɛnnen dɔ jateminɛ.
Aw bɛ laɲini barika hakɛw fara ɲɔgɔn kan ni sɛgɛsɛgɛli funteni wajibiyalen ye, nɛnɛ hakɛ ani sɛgɛsɛgɛli kɛcogo ni a bɛ se ka kɛ yɔrɔ o yɔrɔ.
Aw bɛ rollo bonya, a bonya muɲuni, a kɔnɔna cɛmancɛ, a kɛnɛma cɛmancɛ hakɛ, a wulicogo ani a girinya hakɛ caman di.
Aw bɛ masin dilabaga, a modɛli, rotary walima flat-bed forming system ani baarakɛcogo teliya normal di.
Aw bɛ dingɛ janya, a bonya, a juguman ani a nɔngɔn jateminɛw fara a kan, kɛrɛnkɛrɛnnenya la dingɛ juguman walima dingɛ belebeleba.
Aw bɛ aliminiyɔmu papiye walima polimɛri datugucogo dɔn ani ka sigilan funteni, tansiyɔn, sigi waati ani layini teliya min bɛ yen, o di.
Aw bɛ taa jamana min na ani furakɛli, furakɛli sɛbɛnw, jiginni walima kiliyan kɛrɛnkɛrɛnnenw ka sɛbɛnw wajibiyalenw di minnu bɛ sirataama.
MOQ cogoya bɛ kilo 500 lamini, k’a sɔrɔ kɔrɔbɔli-koman sɔrɔli bɛ bɔ a jɔcogo la, a dacogo girinya, a bonya, a kulɛri ani a dilanni waatibolodacogo la. MOQ laban dafa quotation waati.
Furakɛlaw ka pakew dilanni izini
Furakɛminɛnw foroko sɛgɛsɛgɛli yɔrɔ
Furakɛcogo fɛnw foroko dilanni layini
PVC Furakɛcogo fɛnw dilanni sira
Wallis bɛ plastiki sɛbɛn, filimu ani furakɛlifɛnw foroko kɛrɛnkɛrɛnnenw di diɲɛ B2B porozɛw ma. PVC /PE/PVDC porozɛw kama, fɛnsɛbɛnniw bɛ se ka baro kɛ ka kɛɲɛ ni kiliyan ka barika laɲini ye, fɛn caman tigɛli taabolo, pakew dilanni minɛnw ani feerekɛlaw ka seko ni dɔnko wajibiyalenw.
PVC /PE/PVDC caman-caman-yɔrɔw labɛncogo
Ladamuni PVDC finimugu girinya
Custom roll width ani roll configuration
Materiel transparent ani tinted sugandiliw
Misali dɛmɛni ka ɲɛsin kɔrɔbɔliw dilanni ni u sigili ma
Fɛɛrɛ-sɛbɛnni baro furakɛli seko ni dɔnko kama
Forobaciyɛnw bilala jamana wɛrɛw la jamana wɛrɛw ka B2B komandiw kama
PVC /PE/PVDC ye furaw foroko filimu ye min bɛ kɛ ni fɛn caman ye, min bɛ PVC thermoforming dɛmɛ, PE sɛgɛsɛgɛli ni baarakɛcogo sigicogo, ani PVDC ka ji ni oksizɛni barika baarakɛcogo fara ɲɔgɔn kan.
PVC /PVDC bɛ PVC substrat gɛlɛn ni PVDC barika dacogo fara ɲɔgɔn kan. PVC /PE/PVDC kɔnɔ, PE layɛrɛ wɛrɛ bɛ yen min bɛ se ka fɛn caman sɛgɛsɛgɛli, baarakɛcogo ani sigicogo ɲɛ, o b’a to nafa bɛ a la ka jateminɛ kɛ kurukuruw kɔnɔ minnu ka dun walima minnu ka bon.
A janya bɛɛ lajɛlen minnu bɛ sɔrɔ, olu bɛ Taa 50–400 μm ɲɔgɔn na. Layidu laban hakɛw ni u bonya muɲuli ka kan ka dafa ka kɛɲɛ ni foroko ni barika kɛcogo wajibiyalen ye.
PVDC dacogo girinya minnu bɛ sɔrɔ, olu bɛ se 60–120 g/m². Datugulan girinya ɲuman ka kan ka sugandi ka kɛɲɛ ni WVTR, OTR ani furakɛli sabatili laɲini wajibiyalen ye.
A ka ca a la, finimugu girinya min ka bon, o bɛ se ka barikalan baara ɲɛ, nka o bɛ se ka musaka fara a kan, wa a kelen tɛ barika laban dantigɛ. PVDC chimie, coating uniformity, forming depth ani pakew dilanni fana nafa ka bon.
PVC /PE/PVDC bɛ se ka ji ni oksizɛni barika caman di, nka 'barika min ka bon kosɛbɛ' ka kan ka ɲɛfɔ ni WVTR ni OTR wajibiyalenw ye minnu bɛ se ka suman. Fɛn minnu ka gɛlɛn kosɛbɛ, olu bɛ se ka kɛ ni PVDC ye min barika ka bon kosɛbɛ, PC TFE-based film walima cold-form aluminium.
PE layɛrɛ bɛ fɛn dɔ fara fɛn caman sɛgɛsɛgɛli kan, wa a bɛ se ka baarakɛcogo ni sigicogo wajibiyalenw dɛmɛ. A baara tigitigi bɛ bɔ PE layɛrɛ bilayɔrɔ la ani pake dafalen dilannen cogo min na.
Jagokɛyɔrɔ bɛnnenw bɛ se ka jateminɛ walasa ka dingɛ jugumanw ni dingɛw bonya. Se lakika bɛ bɔ a janya bɛɛ lajɛlen na, PE layini, a kɔnɔna jateminɛ, a funteni cogoya ani a kurukuruw masin. Sɛnɛfɛnw dilanni kɔrɔbɔliw bɛ ladilikan di.
Ɔwɔ, a bɛ se ka jateminɛ furakisɛ kurukuruw foroko la, yɔrɔ min na a kɛcogo sugandilen bɛ fura ka ji, oksizɛni, a dilanni ani a sabatili wajibiyalenw wasa.
A bɛ se ka jateminɛ kɛ ka ɲɛsin furakisɛw ni jeli nɔgɔlenw ma, kɛrɛnkɛrɛnnenya la ni kurukuru belebelebaw bɛ a ɲini ka u dilanni kɛcogo ɲɛ ani ka dɔ fara barika baara kan.
Bɛnkan bɛ bɔ PE yɔrɔ tigitigi la ani funteni-datugulan min bɛ kɛ aluminiyɔmu papiye kan. Jiginni web yɛrɛ ni datugulan ka kan ka sɛgɛsɛgɛ ɲɔgɔn fɛ sani u ka kɛ caman ye.
Kalanso bɛnnenw bɛ se ka jateminɛ furakɛli sira teliyalenw kan, nka masinw ka bɛn ɲɔgɔn ma, o bɛ bɔ modeli tigitigi la, rollo cogoya la, funteni cogoyaw la, dingɛ jateminɛcogo la, finɛtiri datugucogo la ani layini teliya la.
O kɛcogo fila bɛɛ bɛ se ka jateminɛ, nka u bɛ baara kɛ ni funteni ni fɛn dilanni cogoya wɛrɛw ye. Blister-machine model kɛrɛnkɛrɛnnen ka kan ka di material qualification waati.
WVTR wajibiyalen bɛ bɔ fura in ka ji hakɛ la, a kurukuruw jateminɛcogo, a maracogo ani a maracogo laɲini. Aw bɛ laɲini nafa di ka fara funteni, nɛnɛ hakɛ kan ani sɛgɛsɛgɛli kɛcogo kan.
OTR wajibiyalen bɛ bɔ furakɛlicogo la min bɛ se ka oksidan sɔrɔ cogo min na. Nafa ka kan ka bɔ sabatili ni pakew dilanni wajibiyalenw na.
Forokofɛn si tɛ a yɛrɛma, a tɛ se ka a ka waati kɛrɛnkɛrɛnnen dɔ garanti. PVC /PE/PVDC bɛ se ka dɔ bɔ ji ni oksizɛni tali la, nka a waati laban ka kan ka sigi senkan fura dilannikɛla ka sabatili porogaramu fɛ min sɛgɛsɛgɛra.
Furakɛcogo-minɛnw foroko sterili bɛ ɲini ka se ka fɛnw bɛn ɲɔgɔn ma, sterilize kɛcogo, sigilan dafalen ani furakɛli-minɛnw foroko sariyaw minnu bɛ sirataama. A man kan ka jate ka bɔ PVC /PE/PVDC fɛn tɔgɔ dɔrɔn na.
Kulɛri minnu bɛ ye, minnu bɛ kɛ ni tintin ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka baro kɛ. Ni fura in bɛ yeelen lakanani de wajibiya, sannikɛlaw ka kan fana ka a fɔ ko a janya wajibiyalen don ani a ka yeelenbɔcogo.
Awɔ. Misali ni kɔrɔbɔlifɛnw ka kan ka jateminɛ ni thermoforming, barika baarakɛcogo, PE/lidding bɛnkan, web boli ani finiw-package integrity sanni jago ka sɔnni ka kɛ.
MOQ cogoya bɛ kilo 500 lamini. Kɔrɔbɔli-koman sɔrɔli ani MOQ laban bɛ bɔ jɔcogo la, PVDC dacogo girinya, a bonya, a kulɛri ani a dilanni waatibolodacogo.
Aw bɛ fura walima a tata hakɛ, sisan fɛn dilannenw jɔcogo, a girinya bɛɛ lajɛlen, PE layini wajibiyalen, PVDC dacogo girinya walima laɲini WVTR/OTR, roll width, core diameter, blister-machine model, cavity dimensions, lidding foil, sigicogo, sariyaw wajibiyalenw ani komandi hakɛ jateminɛlen di.
Aw ye aw ka sisan PVC /PE/PVDC sigicogo ci Wallis ma, a janya bɛɛ lajɛlen, PVDC finimugu girinya walima a barika laɲini, roll width, blister-machine model, cavity dimensions ani lidding material. An bɛ se ka baro kɛ furakɛli blister film customized high-barrier pharmaceutical blister film kan OEM ani B2B porozɛw kama.
Ni aw bɛ blister-film feerela dɔ bila a nɔ na min bɛ yen, aw bɛ TDS, COA walima reference roll di sisan walasa barika, foroko, sigili ani masin bolicogo wajibiyalenw ka se ka jateminɛ sani u ka jago kɛ.
