Scratch-Resistant Nsuo PC / PMMA Composite Krataa

Dɛn Ne PC/PMMA Composite Sheet a Ɛnyɛ Scratch-Resistant?

PC /PMMA a wɔabom ayɛ krataa yɛ plastic krataa a ɛwɔ ntoatoaso pii a ɛka polycarbonate (PC) a ɛwɔ nkɛntɛnso kɛse ne polymethyl methacrylate (PMMA) a ɛyɛ den kɛse bom. Saa adansi yi kari pɛ wɔ nkɛntɛnso ahoɔden, optical hwɛbea, scratch resistance ne processability wɔ ade biako a emu yɛ hare mu.

Wallis de PC/PMMA composite board a ɛda adi pefee ma display covers, nnwinnade mfɛnsere, kar mu panels, electronic control surfaces, retail fixtures ne nneɛma afoforo a ɛhwehwɛ sɛ ɛyɛ nea ɛyɛ den, ɛnyɛ den sɛ wobɛhohoro na nsu ntumi nkɔ mu. Standard thickness a wɔakyerɛ wɔ kratafa yi yɛ 1.5 mm ; custom thicknesses, sheet sizes ne kɔla ahorow wɔ hɔ sɛnea adwuma no ahwehwɛde ahorow te.

Bisa Nhwɛsode anaa Quote

Sɛnea PC/PMMA Composite Structure no Yɛ Adwuma

PMMA Surface Layer: Ɛda adi pefee na ɛko tia

PMMA anim no ma ɛyɛ hyerɛn, a ɛda adi pefee wɔ aniwa so a ɛwɔ awosu mu denden ne wim tebea a ɛyɛ papa sen PC a wɔankata so. Ɛboa panel a wɔawie no ma ɛko tia scuffs a wɔtaa yɛ no na ɛkora ne hwɛbea so wɔ application ahorow a wɔtaa di ho dwuma mu.

PC Core Layer: Nkɛntɛnso Ahoɔden ne Formability

Polycarbonate core no boa toughness, bending adwumayɛ ne ahoɔden a ɛko tia akwanhyia nkɛntɛnso. Sɛ wɔde toto PMMA nkutoo a wɔde di dwuma ho a, nhyehyɛe a wɔabom ayɛ no ntaa nni huammɔdi a ɛyɛ mmerɛw na ɛnyɛ den sɛ wɔbɛdannan ne ho akɔ nneɛma a ɛhwehwɛ ahobammɔ ne asiesie mu.

Nea ɛho hia: awiei koraa no hardness, UV durability, hann transmission, forming adwumayɛ ne nnuru a ɛko tia gyina grade a wɔapaw, layer ratio, thickness ne biara optional hard coating. Si sɔhwɛ kwan a wɔhwehwɛ ne botae bo a wɔde asi so no so dua ansa na wode ahyɛde a ɛdɔɔso ama.

PC/PMMA Composite Krataa a ɛda adi pefee

PC/PMMA Composite Sheet Mfiridwuma ho Nkyerɛkyerɛmu

Mfaso Titiriw a Ɛwɔ Scratch-Resistant Waterproof PC/PMMA Board so

Nneɛma a Ɛtena So Yiye Sen Standard PC

PMMA no ani boa ma ɛtew nsensanee a wotumi hu so fi sɛnea wodi ho dwuma ne sɛnea wosiesie no sɛnea ɛsɛ no so. Wɔ high-contact cover lenses anaa control panels ho no, kyerɛ pencil-hardness anaa abrasion-test gyinapɛn a wɔhwehwɛ sɛnea ɛbɛyɛ a grade no betumi ne application no ahyia.

High Impact Resistance ne Ahobammɔ a Wɔde Di Dwuma

PC core no twetwe nkɛntɛnso yiye sen brittle transparent nneɛma, boa ma ɛtew mpaapaemu ne abubu bere a fabrication, installation ne service. Eyi ma krataa a wɔde afrafra no yɛ ɔkwan a mfaso wɔ so wɔ baabi a ɛho hia sɛ ɛyɛ te sɛ ahwehwɛ ne sɛnea ɛyɛ den a ɛkɔ anim no nyinaa.

Nsu a Ɛko Tia, Ɛnyɛ Den sɛ Wobɛhohoro So

Plastik a ɛnyɛ abon no ntwe nsu na wobetumi apopa. Sɛ wopɛ sɛ wode nnuru a ekum mmoawa, nnuru a wɔde siw yare ano, nkyene a wɔde petepete nneɛma so anaa nneɛma a wɔde tew nneɛma ho a ano yɛ den di dwuma a, bisa sɛ wɔnyɛ nnuru a ɛne ne ho hyia ho nhwehwɛmu mfa nhu ade pɔtee a wɔde tew nneɛma ho ne bere a wɔde bɛka ho.

Optical Hwɛ ne Design Flexibility

Transparent na glossy wie boa display ahobammɔ, decorative panels ne tintim afã horow. Wobetumi asusuw kɔla, tintim, mfiri ne nwene ahwehwɛde ahorow a wɔahyɛ da ayɛ ho afi mfonini ahorow anaa nhwɛsode ahorow a wɔawie-afã mu.

UV-Stable Options a Wɔde Yɛ Abɔnten Nnwuma

Sɛ wopɛ abɔnten nsɛnkyerɛnne, akwantuo anaa adansiɛ nneɛma a, paw UV-stabilized grade a egyina wim tebea a wɔhwɛ kwan, bere a wɔde bɛda adi ne kɔla-sesa ahwehwɛdeɛ so. Ɛsɛ sɛ wɔsi abɔnten fata so dua de gyina adwuma no ho nkyerɛkyerɛmu so sen sɛ wɔbɛfa no sɛ efi nneɛma su nkutoo mu.

PC/PMMA Composite Board Adwumayɛ ne Nea Ɛda Hɔ

PC/PMMA Composite Sheet a wɔde di dwuma

Kar Ho Nneɛma a Wɔde Kyerɛkyerɛ ne Mfinimfini Nneɛma a Wɔde Kyerɛkyerɛ

Ɛfata ma display cover lenses, instrument-cluster covers, center-console panels ne decorative trim baabi a optical hwɛbea, impact resistance ne touch surface a ɛyɛ den ho hia.

Industrial HMI ne Nnwinnade Mfɛnsere

Wɔde di dwuma ma mfiri control-panel mfɛnsere, nnwinnade ahobammɔ, nnwinnade nkataso ne din nkrataa. Wobetumi de CNC ntokuru, slots, cutouts ne mfonini a wɔatintim atoto adetɔfo no mfiridwuma mfoniniyɛ ho.

Ɛlektrɔnik ne Smart-Device Panel ahorow

Nneɛma a emu da hɔ, nea wotumi tintim ne nkɛntɛnso adwumayɛ a wɔaka abom no boa touch-panel covers, appliance control surfaces, smart-home panels ne electronic display windows.

Retail Displays, Signage ne Mfinimfini Nneɛma a Wɔde Sisi

Ɔfã a ɛhyerɛn ne adwumayɛ a ɛnyɛ den sɛ ɛho tew no fata nneɛma a wɔde kyerɛ, nsɛnkyerɛnne, mpaapaemu, shelf afã horow ne decorative panels a ɛda adi sɛ wɔtaa di ho dwuma.

Abɔnten ne Kar Ho Nneɛma a Wɔde Yɛ Adwuma

Wobetumi asusuw UV-stabilized grades ho ama abɔnten nsɛnkyerɛnne a wɔabɔ ho ban, kar mu, po so dan mu nneɛma ne nnwuma a ɛtete saa. Ɛsɛ sɛ wɔkyerɛkyerɛ wim tebea ho sɔhwɛ a wɔhwehwɛ, ogyaframa dodow ne ɔsom-ɔhyew dodow mu bere a wɔrepaw nneɛma no.

PC/PMMA Composite Board Nnwuma a wɔtaa de di dwuma

PC/PMMA Composite vs. PC, PMMA ne Glass

Ntotoho yɛ akwankyerɛ a ɛfa nneɛma a wɔpaw ho wɔ ɔkwan a ɛkɔ akyiri so. Adwumayɛ ankasa gu ahorow wɔ resin grade, thickness, layer ratio, coating ne sɔhwɛ kwan so.

Customization ne Processing Nneɛma a Wɔpaw

• Nsusuwii: amanne kwan so thickness, ne tɛtrɛtɛ, ne tenten ne nkratafa a wɔatwa sɛnea ne kɛse te.

• Kɔla ne sɛnea ɛte: transparent, customized kɔla ne glossy wie.

• Fabrication: pɛpɛɛpɛ twa, drilling, CNC ntokuru, slots ne amanne nsusuwii.

• Forming: bending anaa formed parts a egyina thickness, radius ne aniwa ahwehwɛde ahorow so.

• Surface protection: ahobammɔ masking film ma akwantu ne downstream dwumadie.

• OEM / ODM: nneɛma ne fabrication mmoa a egyina nhwɛsode anaa mfiridwuma mfonini ahorow so.

Munsusuw Wo Amanneɛbɔ Ho Nkyerɛkyerɛmu Ho

Sɛnea Wobɛpaw PC/PMMA Composite Board a Ɛfata

1. Kyerɛkyerɛ Nneɛma a Atwa Yɛn Ho Ahyia a Wɔde Di Dwuma Awiei no Mu

Ka sɛ ebia wɔde ɔfã no di dwuma wɔ dan mu anaa abɔnten na kyerɛ sɛnea owia hann, nsu, nneɛma a wɔde tew nneɛma ho, nnuru, ɔhyew, awɔw ne nea wɔde wɔn nsa ka mpɛn pii. Eyi na ɛkyerɛ sɛ ebia UV stabilization anaasɛ application-specific surface treatment ho hia.

2. Kyerɛ Adwumayɛ Botae a Ɛho Hia

Sɛ anka wobɛbisa 'high scratch resistance' nko ara,' fa gye a wotumi susuw te sɛ pɛnsere a ɛyɛ den, Taber abrasion, hann a ɛkɔ, ahum, nkɛntɛnso sɔhwɛ, UV-aging nnɔnhwerew, dimensional tolerance anaa ogyaframa rating ma.

3. Kyɛ Drawing ne Processing Ɔkwan no

Send awie kɛse, thickness, tolerances, ntokuru, edge nsɛm, bending radius, forming bun, tintim kwan ne nhyiam nhyehyɛe. Saa nsɛm yi boa ma wɔsɔ mpaapaemu, optical distortion ne dimensional stability hwɛ ansa na wɔayɛ.

4. Pene Nhwɛsode Bi So Ansa na Woayɛ Nneɛma pii

Sɔ nhwɛsode no hwɛ wɔ ankasa dwumadie ne ɔsom tebea mu. Wɔ nnwuma a ɛho hia ho no, pene nhwɛsoɔ a wɔapene so, ɔkwan a wɔfa so hwɛ ne anohyetoɔ a wɔde gye tom no so ansa na moasi so dua sɛ wɔbɛyɛ nneɛma pii.

Nneɛma Pa a Wɔhwɛ So ne Nneɛma a Wɔyɛ

Wallis de mfiri a wɔde yɛ nneɛma ne nea wɔde hwehwɛ nneɛma mu di dwuma de hwɛ sɛnea ɛte ne sɛnea ɛyɛ adwuma so. Ɛgyina nkyerɛkyerɛmu a wɔapene so no so no, nhwehwɛmu betumi ayɛ krataa no nsusuwii, sɛnea ɛte wɔ soro, nkrasɛm ne ahum, abrasion suban, UV wim tebea ne nneɛma a wɔde kyekyere nneɛma tebea.

Dɛn Nti na Wopaw Wallis sɛ Wo PC/PMMA Krataa a Wɔde Ma?

• Stable production: advanced extrusion mfiridwuma boa daa krataa su ma mpɛn pii ahyɛde.

• Virgin raw materials: resins a wɔapaw boa ma ɛda adi pefee, hwɛbea ne dwumadie a ɛkɔ so pɛpɛɛpɛ.

• Custom manufacturing: dimensions, kɔla ne downstream fabrication betumi ahyia adwuma no ahiade.

• Quality inspection: wɔhwɛ dimensions ne performance nneɛma a wɔapene so ansa na wɔde amena.

• B2B supply support: nhwɛsoɔ, mfiridwuma mu nkitahodi, dodoɔ a wɔyɛ ne export packaging wɔ hɔ.

• OEM / ODM som: mmoa fi nneɛma paw denam amanne awie afã horow.

Wiase Nyinaa Dwumadi ne Nhyehyɛe Mmoa

Wallis boa amannɔne nneɛma a wɔde ba amannɔne, wɔn a wɔkyekyɛ, wɔn a wɔyɛ nneɛma ne OEM adetɔfo denam nhwɛsode nhwehwɛmu, nkyerɛkyerɛmu a wɔde si so dua, nneɛma a wɔyɛ no ntam nkitahodi ne nneɛma a wɔde kɔ amannɔne so. Kyɛ wo application, afe afe ahwehwɛde ne mfiridwuma ho mfonini na woanya nyansahyɛ a ɛyɛ pɛpɛɛpɛ.

Wallis Daa Dwumadi ne Wiase Nyinaa Nhyehyɛe Mmoa

Adetɔfo Nsɛm a Wɔka

PC/PMMA Composite Sheet Nsɛm a Wɔtaa bisa

Nsonsonoe bɛn na ɛwɔ PC/PMMA composite sheet ne standard polycarbonate ntam?

Standard PC ma ahoɔden a ɛkyɛn so a ɛbɔ nanso ɛtwetwe mmerɛw kakra. PC/PMMA composite sheet de PMMA soro a ɛyɛ den ka ho bere a ɛkura PC core no toughness, na ɛma kari pɛ pa wɔ impact adwumayɛ ne surface hwɛbea.

So PC/PMMA composite board no ntumi nsɛe koraa?

Plastik biara nni hɔ a ɛyɛ mmerɛw a ɛrentumi nsɛe koraa. PMMA no ani ma scratch resistance a eye sen standard PC, bere a optional hard-coated grades betumi ama abrasion resistance a ɛkorɔn. Kyerɛ sɔhwɛ gyinapɛn a wɔhwehwɛ ne gye a wogye tom ma akwammisa ahorow a ɛhwehwɛ.

So krataa no fata sɛ wɔde di dwuma wɔ abɔnten?

Yiw, bere a wɔpaw UV-stabilized grade a ɛfata no. Ka beae no kyerɛ Wallis, ɔsom nkwa nna a wɔhwɛ kwan, owia hann a ɛbɛda adi ne kɔla-sesa anohyeto ahorow sɛnea ɛbɛyɛ a wobetumi asusuw ɔkwan a ɛfata a wɔfa so gyina wim tebea ano no ho.

So wobetumi atwitwa PC/PMMA nkrataa, atutu, atintim anaa abɔ?

Aane. Nnwuma a ɛwɔ hɔ no bi ne twa, drilling, CNC machining ne bending. Kyɛ thickness, bend radius, forming temperature, print system ne drawing ansa na wɔayɛ no sɛnea ɛbɛyɛ a wobetumi asi compatibility so dua.

So Wallis betumi de custom thicknesses, sizes ne kɔla ahorow ama?

Aane. Standard thickness wɔ krataafa yi so yɛ 1.5 mm, na amanne thicknesses, krataa dimensions ne kɔla ahorow wɔ hɔ a egyina mfiridwuma mu nhwehwɛmu, production tumi ne order dodow.

Ɔkwan bɛn so na ɛsɛ sɛ mehohoro PC/PMMA composite surface ho?

Fa nsu a ɛho tew, aduru a wɔde hohoro nneɛma ho a ɛnyɛ den ne ntama a ɛyɛ mmerɛw a ɛnyɛ nea ɛyɛ mmerɛw di dwuma. Kwati dry wiping, abrasive pads ne solvents a wɔmpene so. Sɔ nnuru biara a wɔde tew nneɛma ho hwɛ wɔ nhwɛsode bi so ansa na wode adi dwuma kɛse.

Nsɛm bɛn na ehia na ama wɔafa asɛm aka pɛpɛɛpɛ?

Yɛsrɛ sɛ fa ne kɛse, ne tɛtrɛtɛ, ne tenten, ne kɔla, ne awieɛ, ne dwumadie, ne adwumayɛ ho ahwehwɛdeɛ, ne dwumadie mfonini, dodoɔ, baabi a wɔde bɛkɔ ne adansedie nkrataa anaa sɔhwɛ amanneɛbɔ a wɔhwehwɛ ma.

So metumi anya nhwɛsode bi ansa na makra nneɛma pii?

Aane. Nhwɛsoɔ wɔ hɔ ma sɛdeɛ ɛteɛ, dwumadie ne adwumayɛ nhwehwɛmu. Sɛ wopɛ custom grade anaa fabricated fã a, fa mfiridwuma ho nkyerɛkyerɛmu no ma sɛnea ɛbɛyɛ a Wallis betumi asi nhwɛsode a ɛwɔ hɔ ne bere a wɔde di kan no so dua.

Wohia PC/PMMA a wɔabom ayɛ krataa a wɔahyɛ da ayɛ?
Fa wo mfonini, botaeɛ adwumayɛ, nsusuiɛ ne ɔkra dodoɔ mena ma nneɛma paw ne quotation.

Wo ne Wallis nni nkitaho