|
Wallis -Sɔlid Polikabɔnɛt Shit
Wallis we nem Wallis
Sɔlid Polikabɔnɛt Shit
| Kɔlɔ: | |
|---|---|
| Waid : | |
| Lɛngth : | |
| Kwantiti: | |
Wallis solid diamond embossed polycarbonate sheet na wan durable textured PC panel we dɛn mek fɔ akitɔkchral glazing, ruf, skaylayt, patishɔn, prayvet skrin, kanopi, sayn, displei ɛn industrial protɛktiv aplikeshɔn.
Di ɛmbos dayamɔn sɔfays de skata dairekt layt, ridyus harsh glare ɛn limited klia si-thru visibiliti we stil alaw natura layt fɔ pas tru di panɛl. Dis de mek i fayn fɔ prɔjek dɛn we nid fɔ gɛt balans pan layt difyushɔn, vijual prayvet pat, impak rɛsistɛns ɛn dɛkɔretiv apinans.
Dɛn mek am frɔm vajin polikabɔnɛt rɛsin, Wallis tɛkstɔr PC panɛl dɛn de insay 1–20mm tiknɛs , wit we go rich 2100mm , standad ɛkspɔt lɔng we na 5800mm ɛn 6000mm, ɛn kɔstɔmayz kɔt saiz. Di kɔlɔ dɛn we de na klia, grɛn, opal, brɔnz, blu, ɔrɛnj ɛn rɛd.
Dɛn kin gi gred dɛn we gɛt UV fɔ yuz dɛn na do. Di wan dɛn we de bay fɔ sho if dɛn nid fɔ gɛt UV protɛkshɔn na wan say ɔ ɔl tu di say dɛn, togɛda wit di say we di prɔjek go de, di dairekshɔn fɔ instɔleshɔn ɛn di kɔndishɔn dɛn we dɛn de op fɔ gɛt di savis na do.
| Tayp fɔ Prodakt | Solid Embossed Diamond Tekstur Polikabonayt Shit |
| Tin dɛn | Virgin Polikarbonɛt / PC Rɛsin |
| Sho | Daymɔnd Ɛmbos / Tekstɔr Surface |
| Tik we i tik | 1.0–20mm ɔ Kastɔmayz |
| Standart Width dɛn | 1220 / 1560 / 1820 / 2100mm |
| Standart Lɛngth dɛn | 5800 / 6000mm, ɛn di ɔda wan dɛn; kɔstɔm kɔt lɔng dɛn de |
| Kɔlɔ dɛn | Klia / Grin / Opal / Bronz / Blu / Ɔrɛnj / Rɛd / Kastɔmayz |
| Listed Layt Transmishɔn | Na lɛk 50% fɔ di gred we de na di list naw; di aktual valyu dipכnt pan di tik, tεkschur εn kכla |
| Protɛkshɔn fɔ UV | Opshɔnal kɔ-ɛkstrud UV-protɛktiv sɔfays fɔ ɔda aplikeshɔn dɛn |
| Tekstɔr Fɔnkshɔn dɛn | Layt Difyushɔn / Glare Ridɔkshɔn / Prayvesi / Dɛkɔretiv Sɔfays |
| Fabrikeshɔn fɔ mek tin dɛn | Kɔt / CNC Routin / Drlin / Kol Bɛnd / Tɛmofɔmin |
| Tipik Aplikeshɔn dɛn | Skaylayt, Kanopi, Patishɔn, Prayvesi Skrin, Displei, Sayn, Mashin Gad ɛn Dɛkɔretiv Panɛl |
| Kastamayzeshɔn | Tiknes / Width / Lɛngth / Kɔlɔ / UV Sayd / Kɔt / Pak |
Notis: Layt transmishɔn, impak trɛnk, faya pefɔmɛns, UV warranty, alawable span, bɛnd rayus ɛn ɔda savis layf fɔ kɔnfyus fɔ di ɛksaktɔ tiknes, kɔlɔ ɛn UV kɔnfigyushɔn we dɛn ɔda.
Di tebul we de kam biɛn ya de jɔyn Wallis in prɔdak data we de na di list naw wit kɔrɛkt injinɛri yunit dɛn. Valyu dɛn we nɔ gɛt wan stetmɛnt tɛst we dɛn fɔ kɔnfyus agens di fayn tɛknikal data shit ɔ batch tɛst ripɔt bifo dɛn yuz dɛn as kɔntrakt spɛsifikɛshɔn.
| Prɔpati | Yunit | we dɛn List / Rifrɛns Valyu | Tɛknikal Notis |
|---|---|---|---|
| Impekt Strɔng | J/m | 88–92 | Kɔnfɛm tɛst standad ɛn spɛshal tiknɛs |
| Layt Transmishɔn | % . | Na lɛk 50 pipul dɛn | Dipen strɔng wan pan di kɔlɔ, tik ɛn di dip we di tɛkstɔr de |
| Tik | g/cm⊃3 we de na di bɔdi; | Na lɛk 1.2 | Kɔrɛkt frɔm di ɔrijinal inkɔrɛkt yunit we na g/m |
| Elongation na Brek | % . | ≥130 we dɛn kin yuz | Kɔnfɛm tɛst standad ɛn sheet gred |
| Kofishin fɔ Linya Tɛmral Ɛkspɛnshɔn | mm/m·K | Na lɛk 0.065 | Tɛmral-ɛkspɛnshɔn kliarens nid fɔ de we dɛn de instɔl am |
| Di Tɛmpratura fɔ di Savis we dɛn dɔn list | °C | −40 to +120 | Di limit fɔ kɔntinyu fɔ yuz am dipen pan lod, ɛksplɔshɔn ɛn sheet gred |
| Tipik PC Tɛmal Kɔnduktiviti | W/(m·K) . | Na lɛk 0.2 | Di ɔrijinal 2.3–3.9 W/m²·°C valyu tan lɛk se na U-valyu rɛnj we nɔ gɛt ɛnitin fɔ du wit am |
| Flɛkshɔnal Strɔng | N/mm⊃2, ɛn di ɔda wan dɛn; | Na lɛk 100 pipul dɛn | Kɔnfɛm tɛst standad ɛn prodakshɔn gred |
| Modulus fɔ Ɛlastisiti | MPa | Na lɛk 2400 pipul dɛn | Yuzful fɔ injinɛri diflɛkshɔn kɔlkyulɛshɔn |
| Tensile Strɔng we pɔsin kin gɛt | N/mm⊃2, ɛn di ɔda wan dɛn; | ≥60 | Kɔnfɛm tɛst standad ɛn prodakshɔn gred |
| Ridyus di Sawnd | dB | Projek-Spɛsifi k | Rikways wan stet akostik tɛst standad, tiknes ɛn kɔmplit instɔleshɔn asɛmbli |
Ɛnjinia valyu dɛn nɔ fɔ transfa ɔtomɛtik bitwin difrɛn shit kɔlɔ dɛn, UV gred dɛn, risaykul-kɔntinɛnt fɔmyulashɔn dɛn ɔ sɔfayz patɛn dɛn. Rikwest di fainal TDS fɔ di ɛksaktɔl prodak kɔnfigyushɔn.
Solid Embossed Diamond Tekstur Polikabonayt Shit
Diamant tekstur PC Surface
Panel PC Panel we gɛt tɛkstɔr we gɛt kɔlɔ
Daymɔnd ɛmbos polikabɔnɛt na sɔlid PC shit we gɛt wan ripit rayz ɔ rɛs dayamɔn-shep sɔfa patɛn. Di tɛkstɔr nɔmal fɔ fɔm di tɛm we dɛn de ɛkstrushɔn di shit, we de mek wan intagreted sɔfays pas wan sɛpret print dɛkɔretiv layt.
We layt rich di tɛkstɔr sɔfays, di dayamɔn jɔyometri kin chenj di dairekshɔn fɔ transmishɔn ɛn riflekshɔn. Dis kin mek layt we saf ɛn we de ɔlsay pas wan panɛl we smol smol transparent ɛn i kin mek di tin dɛn we de biɛn di sheet nɔ kin si klia wan.
Di tɛkstɔr sɔfays de skata layt we de kam insay bɔku dairekshɔn dɛn, we de ridyus kɔnsɛntret brayt spat dɛn ɛn mek layt ifɛkt fɔ skaylayt, patishɔn, dɛkɔretiv panɛl ɛn layt kɔmpɔnɛnt dɛn we soft.
We yu kɔmpia am wit wan smol glos sɔfays, dayamɔn ɛmbos de ridyus dairekt spɛkul riflɛkshɔn ɛn i kin ɛp fɔ kɔntrol harsh glare na brayt layt akitɔk ɔ intɛriɔ ɛnvayrɔmɛnt.
Di sɔfa patɛn de chenj di ditil dɛn we pɔsin kin si biɛn di panɛl we i stil de transmit layt. So i yusful fɔ patishɔn, domɔt, prayvet skrin ɛn dɛkɔretiv glazing usay kɔmplit opasiti nɔ nid.
Daymɔnd pɔtn dɛn de ad dip, riflɛkshɔn ɛn vijual muvmɛnt to di sɔfa, we de alaw di sheet fɔ wok lɛk ɔl tu injinɛri glazing matirial ɛn dɛkɔretiv akitekchral panɛl.
Sɔlid polycarbonate de gi ay impak resistans fɔ glazing, patishɔn, mashin gad ɛn protɛktiv panɛl. I nɔ kin izi fɔ brok pas ɔdinari glas fɔ brok shap shap pat dɛn we denja afta we i ambɔg am aksidɛnt.
wit wan density we de arawnd 1.2g/cm³, polycarbonate na signifyant layt pas glas. Dis kin ridyus transpɔt wet, manual handling difikulti ɛn strɔkchɔral lod.
Daymɔnd tɛkstɔr de gi vijual skrinin ɛn saf layt we nɔ de prodyuz wan kɔmplit opaque wɔl, we de mek i fayn fɔ ɔfis, batrum, pɔblik bildin ɛn rital intɛriɔ.
Wallis de sɔpɔt klia, opal, brɔnz, blu, grɛn, ɔrɛnj ɛn rɛd opshɔn dɛn we gɛt difrɛn tik ɛn panɛl dimɛnshɔn fɔ di prɔjek-spɛsifi k vijual ɛn pefɔmɛns rikwaymɛnt dɛn.
Dɛn kin kɔt, drɔl, rout, kol bɛn ɛn thermoformed di rayt PC gred dɛn. Dis de gi fabricators mɔ fleksibiliti fɔ kɔstɔm sayn, kɔba strɔkchɔ, protɛktiv panɛl ɛn akitɔkchral kɔmpɔnɛnt dɛn.
Kɔ-ɛkstrud UV-protɛkt kɔnfigyushɔn dɛn de ɛp fɔ ridyus yɔlɔ ɛn dɛgradɛshɔn we dɛn de ɛksplɔz na do. Di prɔjek dɛn we de na do fɔ yuz di kɔrɛkt UV gred ɛn instɔl di say we dɛn protɛkt we de fes di san.
Diamond PC Sheet Pɔfɔmɛnshɔn
Dekorativ Tekstur PC Panel
| Kɔmpiashɔn | Daymɔnd Tekstɔr PC | Smɔl Klia PC |
|---|---|---|
| Visual Clarity we pɔsin kin si | Distorted view fɔ sɛmi-prayvesi | Klia si-thru visibiliti |
| Di Distribyushɔn fɔ Layt | I de mek layt skata ɛn skata | Fɔs, i de transmit layt dairekt wan |
| Glare we yu de si | Ridyus di dairekt glare | Mɔ spɛkul riflɛkshɔn |
| Aw a luk | Dekorativ patɛn surface | Klin di say we flat |
| Tipik Aplikeshɔn dɛn | Patishɔn, dɛkɔretiv glaz, difyuza, kanopi ɛn prayvet panɛl | Sefty glazing, mashin gad, winda ɛn klia protɛktiv panɛl |
Daymɔnd tɛkstɔr panɛl dɛn de alaw natura ɔ atifishal layt fɔ pas tru we dɛn de mek ditayli visibiliti nɔ klia, we de mek dɛn fayn fɔ ɔfis patishɔn, batrum skrin, rum divayda ɛn sɛmi-prayvet pɔblik ples.
Di ɛmbos sɔfays de difyuz di de layt we de kam ɛn ɛp fɔ ridyus kɔnsɛntret glare. Yu kin tink bɔt gred dɛn we gɛt UV fɔ skaylayt ɛn ruf-layt aplikeshɔn dɛn we de ɔnda strɔkchɔral ɛn instɔleshɔn rikwaymɛnt dɛn.
Laytwɛt tɛkstɔr polycarbonate de gi impak-resistant shelta we i de alaw difyuz de layt insay ɛntrɛ, patio, wokay ɛn kɔmɛshɔnal kɔba eria.
Di dayamɔn sɔfays kin yuz as dɛkɔretiv ɛlimɛnt na wɔl panɛl, domɔt, atrium, rital intɛriɔ, fɔnicha ɛn branded ɛnvayrɔmɛnt.
Tekschɔ PC panɛl dɛn de gi wan difrɛn bakgrɔn ɔ layt-difyuz sɔfays fɔ sayn dɛn, ɛgzibishin displei, pɔynt-ɔf-sɛl fiks ɛn layt dɛkɔretiv kɔmpɔnɛnt dɛn.
Impact-resistant solid PC kin yuz fɔ protɛktiv barɛri ɛn ikwipmɛnt ɛnklɔzhɔ usay ful optik transparency nɔ nid. Dɛn fɔ chɛk if di mashin-gad fit fɔ du am agens di sefty standad ɛn impak rɛytin we dɛn nid.
UV-protɛkt tɛkstɔr panɛl dɛn kin tink bɔt fɔ sɔm agrikalchɔral glazing usay layt difyushɔn de bɛnifit. Krop-layt we dɛn nid, di tik we di shit tik ɛn di tɛmral pefɔmɛns fɔ di patikyula grinhaus dizayn.
Aplikeshɔn dɛn fɔ Daymɔnd Tɛkschɔ PC Sheet
Tin sheet dɛn kin yuz fɔ dɛkɔretiv ɔvlay, sayn ɛn sɔpɔt panɛl, we tik sheet de gi mɔ stiffness fɔ patishɔn, protɛktiv panɛl ɛn big akitɔkchral kɔmpɔnɛnt dɛn. Faynal tiknes fɔ pik yuz panɛl dimɛnshɔn, sɔpɔt spɛshal ɛn lod rikwaymɛnt.
Klia ɔ layt tint gred dɛn de gi mɔ de layt, we opal, brɔnz ɛn dak kɔlɔ dɛn de gi mɔ prayvet pat ɛn layt transmishɔn we pɔsin kin si smɔl. Rikwest fizik sampul usay kɔlɔ ɔ prayvet pefɔmɛns impɔtant.
Intɛriɔ panɛl dɛn nɔ kin nid di sem UV protɛkshɔn lɛk aw fɔ mek glas na do. Di aplikeshɔn dɛn we de na do fɔ spɛsifa wan-sayd ɔ tu-sayd UV protɛkshɔn ɛn mek shɔ se dɛn instɔl di say we dɛn protɛkt to di say we di san go de.
Prayvesi dipen pan dayamɔn saiz, tɛkstɔr dip, shit kɔlɔ, panɛl tik, layt dairekshɔn ɛn distans fɔ si. Sampul evalueshɔn na rikɔmɛnd bifo big patishɔn ɔ prayvet-skrin prɔjek.
Tɛl Wallis if dɛn go kɔt di shit, drɔl am, CNC routed am, kol bɛnt am, thermoformed am, print am ɔ bonded am. Fabrikeshɔn tɛst kin nid fɔ kɔmpleks shep ɛn prɔjɛkt dɛn we gɛt fɔ du wit di we aw pɔsin de luk.
Kɔnfɛm if di ɛmbos sɔfays fɔ fes di sayd we pɔsin kin si, sayd we dɛn protɛkt ɔ insay sayd na di instɔleshɔn. Oriɛnteshɔn kin afɛkt aw yu luk, aw yu de klin ɛn aw yu de si yu prayvet pat.
Yu kin kɔt dayamɔn polikabɔnɛt yuz fayn fayn tut saw bled ɔ CNC tul dɛn we dɛn mek fɔ plastic. Di sheet fɔ ful-ɔp fɔ sɔpɔt fɔ ridyus di vaybreshɔn ɛn di ed chip.
Yuz shap drɔl dɛn we fayn fɔ polycarbonate ɛn avɔyd fɔ prɛs ɔ ɔt pasmak. Di ol dɛn we dɛn kin yuz fɔ fast na do fɔ gɛt inof kliarens fɔ mek dɛn ebul fɔ mek di ples wam.
Sɔm sheet tiknes kin kol kɔba insay wan aprɔpriet minim bɛnd rayus. If yu bɛnd tayt pasmak, i kin mek yu strɛs, distɔrshɔn ɔ yu kin krak fɔ lɔng tɛm.
Polycarbonate kin thermoformed afta aprɔpriet drying ɛn kɔntrol ɔt. Dip fɔm kin strɛch ɔ visually disstort di dayamɔn tɛkstɔr, so i rεkomεnd fɔ evaluate prototype.
Ink, adhesive ɛn sialant sistem fɔ tɛst fɔ kɔmpitibliti wit polycarbonate. Agresiv sɔlvɛnt kin mek strɛs krak ɔ sɔfa damej.
Polikabכnet de εkspכnd lεk 0.065mm pan wan mita fכ εvri 1°C tεmprachכ chenj. Fram, ol ɛn ed kliarens fɔ alaw fɔ muv instead fɔ rigidly klem di panɛl.
Na wan sayd UV-protɛkt sheet, di mak protɛkt say fɔ fes san layt. Kip di identifying protective film in ples te dεn kכnfכm di orientation.
Fasteners we dɛn tayt pasmak kin mek lokal strɛs, krak ɔ visible panɛl distɔrshɔn. Yuz kɔmpatib wash ɛn gasket fɔ sheb prɛshɔn.
Dɛn fɔ kɔnfyus se di silin ɛn adeziv dɛn se dɛn kɔmpitabl wit polikabɔnɛt ɛn dɛn nɔ gɛt sɔlvɛnt ɔ plastizayza we kin atak di shit.
Klin PC panɛl dɛn we gɛt tɛkstɔr yuz klin wata, mild polycarbonate-compatible ditargent ɛn wan saf klos ɔ spɔnj. Nɔ yuz abrasive pad, shap skrap ɛn agresiv sɔlvɛnt klin.
Bikɔs dɔti kin gɛda insay di ɛmbos sɔfa patɛn, rins di pat dɛn we nɔ tay bifo yu was. Nɔ put prɛshɔn pasmak we go skrach di tɛkstɔr we rayz.
Virgin polycarbonate resin opshɔn dɛn
1–20mm tiknes rεnj
Widths op to 2100mm
Kastom kot lɔng ɛn panɛl dimɛnshɔn
Klia, opal, brɔnz, blu, grɛn, ɔrɛnj ɛn rɛd kɔlɔ dɛn
UV-protɛkt ɔda gred dɛn
Layt-difyuz ɛn prayvet tɛkstɔr
CNC, kot, drɔlin ɛn thermoforming sɔpɔt
Sampul evalueshɔn bifo bɔlk prodakshɔn
Kastom protɛktiv film ɛn pak
OEM / ODM saplae fɔ distribyushɔn ɛn prɔjek bayer dɛn
Kwaliti inspekshɔn fɔ tɛkstɔr polikabɔnɛt kin inklud dimɛnshɔnal mɛzhɔmɛnt, sɔfa-patɛn inspekshɔn, layt transmishɔn, haz, impak pefɔmɛns, UV ol ɛn ɛvalueshɔn fɔ apia.
Transmittans & Haz we de mek pɔsin gɛt
Taber Abrasion Tɛsta fɔ di wan dɛn we de wok
Sɔl Sprɛy Tɛsta
UV Wɛda Tɛsta
Tik we dɛn nid
Wid ɛn lɔng we dɛn nid
Ful sheet ɔ panɛl dɛn we dɛn kɔt to saiz
Kɔlɔ we dɛn nid
Kwantiti we dɛn nid
Aplikeshɔn insay os ɔ na do
Wan-sayd ɔ tu-sayd UV protɛkshɔn
Layt transmishɔn ɔ prayvet lɛvɛl we dɛn nid
Tekstur sayd oriɛnteshɔn
Di tin dɛn we dɛn nid fɔ kɔt, drɔ, bɛnd ɔ thermoforming
Faya-pɔfɔmɛnshɔn rikwaymɛnt
Projek lokeshɔn ɛn savis tɛmpracha
Protektiv-film rikwaymɛnt
Di tin dɛn we dɛn nid fɔ pak ɛn sɛn di tin dɛn
Wallis de saplae tɛkstɔr polikabɔnɛt shit to kɔnstrɔkshɔn-matirial distribyushɔn, glazing kɔntrakta, sayn manifakta, displei faktri, intɛriɔ kɔntrakta ɛn industrial panɛl fabricatɔ.
Di Kɔmni Ɛvride Ɔpreshɔn
Wallis de sɔpɔt sampul kɔnfɔmeshɔn, spɛsifikɛshɔn rivyu, kɔstɔm dimɛnshɔn, pak ɛn prɔjek kɔmyunikeshɔn fɔ intanashɔnal polikabɔnɛt-shit bayer dɛn.
Na wan sɔlid polikabɔnɛt shit wit wan intagreted dayamɔn-shep sɔfays tɛkstɔr. Di tɛkstɔr de difyuz layt, ridyus glare, gi sɛmi-prayvesi ɛn ad wan dɛkɔretiv vijual ifɛkt.
Wallis naw de list tiknes frɔm 1–20mm . Di tiknes we gɛt tɛkstɔr kin dipen pan di kɔlɔ, di panɛl wit ɛn di minim prodakshɔn kwantiti, so di ɛksaktɔl spɛsifikɛshɔn fɔ kɔnfɔm bifo yu ɔda.
Di standad wit dɛn we de naw inklud 1220mm, 1560mm, 1820mm ɛn 2100mm . Wi kin tɔk bak bɔt di panɛl wit we dɛn kɔt di kɔstɔm.
Naw, Wallis de list klia, grɛn, opal, brɔnz, blu, ɔrɛnj ɛn rɛd. Kastɔm kɔlɔ dɛn kin de bay di kwantiti we dɛn mek ɛn di tin dɛn we dɛn nid fɔ mek di kɔlɔ mach.
I nɔmal fɔ gi sɛmi-prayvesi pas fɔ gi kɔmplit opasiti. Prayvet pat kin difrɛn wit di dip we di tɛkstɔr de, di kɔlɔ, di say we di layt de, di distans we yu de si ɛn di distans bitwin di panɛl ɛn di tin dɛn we de biɛn am.
Di dayamɔn patɛn de skata layt pas fɔ riflɛsɛ ɔ transmit am na wan kɔnsɛntret dairekshɔn. Dis kin mek i tan lɛk se i saf ɛn i kin skata.
Di pej we de naw de sho lɛk 50% fɔ di gred we dɛn sho. Aktual transmishɔn kin difrɛn bad bad wan wit tik, kɔlɔ, dayamɔn patɛn ɛn UV fɔmyulashɔn, so aks fɔ data fɔ di ɛksaktɔ kɔnfigyushɔn.
Yɛs, we dɛn pik di rayt gred we gɛt UV ɛn instɔl am kɔrɛkt wan. Kɔnfɛm if di sheet gɛt wan sayd ɔ tu sayd UV protɛkshɔn ɛn instɔl di sayd we dɛn protɛkt to di san layt.
I kin tek ples fɔ glas insay bɔku dɛkɔretiv, prayvet ɛn impak-rɛsistant glazing aplikeshɔn dɛn. Strukchɔral dizayn, faya rikwaymɛnt, optik ɛkspɛkteshɔn ɛn bildin rigyuleshɔn fɔ stil chɛk fɔ ɛni prɔjek.
Yɛs. I kin kɔt, CNC routed ɛn drɔl yuz fayn plastic-prosɛsin tul dɛn. Di sheet fɔ sɔpɔt fayn ɛn di ol dɛn we de na do fɔ alaw fɔ muv wit wam.
Sɔm kɔnfigyushɔn dɛn kin kol kɔba insay wan aprɔpriet minim rayus. Di rayus we dɛn nid dipen pan di tik we di shit tik, di ɔriɛnteshɔn ɛn di kɔndishɔn fɔ instɔleshɔn.
Polycarbonate kin thermoformed afta suitable drying ɛn kɔntrol ɔt. Fɔm kin strɛch ɔ distɔrj di dayamɔn tɛkstɔr, so dɛn fɔ tɛst wan protɔtayp bifo dɛn prodyuz am bɔku bɔku wan.
Fɔ wan-sayd UV sheet dɛn we de na do, di say we dɛn protɛkt wit UV fɔ fes di san layt. Tekstɔ ɔriɛnteshɔn fɔ pik akɔdin to aw i luk, prayvet pat, klin ɛn di prɔjek dizayn.
di tεkschur kin mek sכm sכm mak dεm nכ de fכ si pas pan wan smol smol glos surface, bכt standad polycarbonate nכ skrach-pruf. Wan sɛpret had-kɔt gred nid fɔ de usay ay abrashɔn rɛsistɛns impɔtant.
Yuz klin wata, mild polycarbonate-compatible ditargent ɛn wan saf klos we nɔ de abrasive. Rinse di dɔst bifo yu was ɛn avɔyd agresiv sɔlvɛnt ɔ abrasive klin pad.
Yɛs. Dɛn kin tɔk bɔt di dimɛnshɔn dɛn we dɛn kin kɔt akɔdin to di tik, di wit, kwantiti, di tolɛreshɔn ɛn di tin dɛn we dɛn nid fɔ mek.
Yɛs. Sampul evalueshɔn na rikɔmɛnd fɔ kɔnfɔm kɔlɔ, tɛkstɔr, prayvet pat, layt difyushɔn, tik ɛn fabrikeshɔn kɔmpatibiliti bifo bɔlk prodakshɔn.
Gi di tik, waid, lɔng, kɔlɔ, kwantiti, yuz insay ɔ na do, UV-sayd rikwaymɛnt, prayvet ɔ layt-transmishɔn target, fabrication rikwaymɛnt ɛn pak we.
Yu de luk fɔ dayamɔn ɛmbos polikabɔnɛt shit manifakta fɔ ruf, patishɔn, prayvet skrin, sayn, dɛkɔretiv glaz ɔ industrial panɛl? Wallis de saplae sɔlid tɛkstɔr PC sheet dɛn insay kɔstɔmayz tiknɛs, kɔlɔ ɛn dimɛnshɔn fɔ B2B prɔjek dɛn.
Send yu tiknes, panɛl saiz, kɔlɔ, kwantiti, UV rikwaymɛnt ɛn aplikeshɔn fɔ gɛt wan fayn prodak rɛkɔmɛndishɔn, sampul ɛn faktri kot.
