12mm UV -Resistant Anti-Skrat Polikabɔnɛt fɔ Padel Kɔt

12mm UV -Resistant Anti-Skrat Polycarbonate sheet fɔ Padel Kɔt

Wallis 12mm UV -resistant anti-scratch polycarbonate sheet na wan had-koted transparent PC panɛl we dɛn divɛlɔp fɔ padel kɔt wɔl projɛkt, ɔda spɔt ɛnklɔzhɔ, sefty glazing ɛn ɔda ay-impakt transparent protɛkshɔn aplikeshɔn dɛn. I de kɔba di impak trɛnk we sɔlid polycarbonate gɛt wit wan wear-resistant surface coating we dɛn mek fɔ impɔtant skrach, abrasion, kemikal ɛn ɔda wɛda resistans.

Di klia gred we de naw de gi lɛk 90% visible layt transmishɔn wit listed haze dɔŋ 0.5% . Standart ɛn kɔstɔmayz dimɛnshɔn dɛn inklud 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm ɛn 1995 × 2495 mm, we di wayda prodak famili kin saplae frɔm 1–50 mm tiknes akɔdin to di prɔjek rikwaymɛnt dɛn.

Fɔ padel kɔt manifakta ɛn spɔt-fasiliti kɔntrakta dɛn, di 12mm opshɔn de gi wan transparent, shatter-resistant panɛl sɔlvishɔn wit UV protɛkshɔn ɛn had sɔfays kɔtin. Faynal suitability fɔ bi evalyu as pat pan di kɔmplit kɔt sistɛm, inklud panɛl stiffness, freym dizayn, fastening, bol ribaund, thermal expansion, wind lod ɛn aplikebul lokal ɔ fedareshɔn rikwaymɛnt.

UV -Resistant Anti-Skratch Had-Kɔt Polycarbonate sheet

12mm Padel Kot Polycarbonate sheet na wan Glans

Impɔtant: 12mm tik nɔmɔ nɔ de gi garanti fɔ mek dɛn fala wan patikyula padel kɔt standad ɔ tɛnament homologation. Faynal panɛl dimɛnshɔn, freym spɛshal, fastɛns sistɛm, strɔkchɔral lod, sɔfayz bihayvya ɛn bɔl ribaund fɔ validet fɔ di kɔmplit kɔt dizayn.

Di Spɛsifikeshɔn dɛn fɔ di Prodak

Had-Kɔtin Pɔfɔmɛnshɔn Tɛst Rizɔlt

Di valyu dɛn we de dɔŋ ya na di Wallis kɔtin tɛst data we de na di list naw. Baya dɛn we nid kɔntrakt tɛknikal spɛsifikɛshɔn fɔ aks fɔ di aplikebul TDS, tɛst ripɔt ɛn aprɔv prodakshɔn sampul fɔ di gred we dɛn ɔda.

Wetin Mek Yu fɔ Yuz Had-Kɔt Polikabɔnɛt fɔ Padel Kɔt Projɛkt?

High Impact Resistance we gɛt ay impak

Dɛn pik sɔlid polikabɔnɛt fɔ transparent sefty aplikeshɔn bikɔs ɔf in ay impak rɛsistɛns ɛn shata-rɛsistant bihayvya. Fɔ spɔt ɛnvayrɔmɛnt, dis kin ridyus di risk fɔ denja panɛl fragmɛnt we yu kɔmpia am wit brittle glazing matirial.

UV Protɛkshɔn fɔ Instɔlɛshɔn dɛn we de na do

Ɔda transparent polycarbonate nid UV protɛkshɔn bikɔs lɔng tɛm solar ɛksplɔshɔn kin ɔda we afɛkt optik apinans ɛn matirial pefɔmɛns. Di UV -resistant kɔnstrɔkshɔn na fɔ impɔtant wɛda pefɔmɛns fɔ ɛksplɔz spɔt ɛn glazing aplikeshɔn dɛn.

Anti-Skratch Had Kɔtin

Standard polycarbonate na rili izi fɔ skrach. Wan had surface coating de improve abrasion resistance wen yu de klin, handel en ripit yus, ep transparent kot panɛl dem ritain klia visibiliti fɔ lɔng.

Ay Optik Klariti

Di klia sampul we de na di list naw gɛt lɛk 90% visible layt transmishɔn ɛn haz dɔŋ 0.5%, we de sɔpɔt transparent kɔt ɛnklɔzhɔ usay pleya, spɛkta ɛn kamɛra visibiliti impɔtant.

Kεmikכl εn Wata Resistεns

Dɛn mek di had kɔtin fɔ mek i nɔ ebul fɔ bia wit di envayrɔmɛnt ɛn di kɔmɔn kɔndishɔn dɛn we dɛn kin klin. Dɛn fɔ stil chɛk if di kemikal dɛn kɔmpitabl bifo dɛn yuz strɔng klin, sɔlvɛnt ɔ mentenɛns kemikal.

Dimenshɔn dɛn fɔ di Panɛl we dɛn mek fɔ di kɔstɔm

Wallis kin saplae standad shit ɔ projɛkt-spɛsifi k dimɛnshɔn akɔdin to padel kɔt freym jɔyometri, ol pozishɔn ɛn instɔleshɔn rikwaymɛnt. Di wan dɛn we de bay fɔ gi drɔin bifo dɛn prodyuz fɔ prɔjek dɛn we nɔto standad.

Advantej fɔ 12mm Had-Kɔt PC Shit

Padel Court Wall Pɔfɔmɛnshɔn Rikwaymɛnt dɛn

Wan transparent wɔl panɛl fɔ wan padel kɔt nɔ kin jɔs evalyu bay matirial trɛnk. Di kɔmplit ɛnklɔzhɔ fɔ gi stebul jɔyometri, wan smol ples fɔ ple ɛn prɛdiktibɛl bɔl ribaund we i de kɔntinyu fɔ sef fɔ di pleya kɔntakt.

Bol Ribaund Kɔnsistɛns

Polikabɔnɛt stiffnɛs, panɛl dimɛnshɔn, sɔpɔt spɛshal ɛn fastɛns de inflɔws aw di wɔl de biev we bɔl hit am. Baya dɛn we de divɛlɔp kɔmpitishɔn ɔ kɔmɛshɔnal kɔt fɔ validet ribaund bihayvya pan di asɛmbli we dɔn dɔn pas fɔ tek am se tik nɔmɔ de sho di pefɔmɛns.

Panel Flatness ɛn Surface Smoothness

Di say we dɛn de ple fɔ de flat ɛn smɔl afta dɛn dɔn instɔl am. Frɛm tolɛreshɔn, fastɛns prɛshɔn ɛn tɛmal muvmɛnt fɔ kɔntrol fɔ avɔyd panɛl bow pasmak ɔ lokal difɔmeshɔn.

Strukchɔral Ɛnjinia

Di kɔt wɔl dɛn we de na do na pat pan wan strɔkchɔral sistɛm we de ɛkspos to briz, tɛmpracha chenj, pleya kɔntakt ɛn ripit impak. So di kɔt manifakta ɔ strɔkchɔral injinia fɔ rivyu panɛl dimɛnshɔn, sɔpɔt spɛshal, ol, fastɛns ɛn stɛl-frɛm dizayn.

Fɛdareshɔn ɛn Lokal Kɔmplians

If di kɔt na fɔ rɛgyulatɛd kɔmpitishɔn, klab sɛtifikeshɔn ɔ pɔblik yus, kɔnfɔm di aplikebul fedareshɔn, homologation, bildin-kɔd ɛn sefty rikwaymɛnt dɛn bifo yu apruv polikabɔnɛt as di las wɔl matirial.

12mm Polycarbonate vs Tempered Glass fɔ Padel Kɔt dɛn

Padel Kɔt Aplikeshɔn dɛn

Transparent Padel Kɔt Wall Panel dɛn

Di 12mm had-koted PC shit kin evalyu fɔ transparent padel wɔl sistɛm usay ay impak rɛsistɛns, klia visibiliti ɛn ɔda wɛda protɛkshɔn nid fɔ de. Panɛl dimɛnshɔn ɛn fiks ditil fɔ bi ɛnjinɛri fɔ di patikyula kɔt strɔkchɔ.

Panoramic ɛn Kastɔm ​​Kɔt Projɛkt dɛn

Big transparent wɔl eria dɛn nid fɔ tek tɛm kɔntrol di panɛl deflekshɔn ɛn sɔpɔt spɛshal. Fɔ panoramik dizayn, gi di kɔmplit stɛl-frɛm drɔin, panɛl dimɛnshɔn, fiks pozishɔn ɛn di kɔt standad we dɛn nid bifo dɛn gri fɔ di las matirial.

Di Spɔt Enklɔzhɔ dɛn we De na do

Bifo padel, UV -resistant had-coated PC kin yuz fɔ transparent barɛri ɛn protɛktiv panɛl dɛn na spɔt fasiliti usay impɔk ɔltɛm, ɛksplɔshɔn na do ɛn visibiliti impɔtant.

Instɔlɛshɔn Kɔnsidɛreshɔn fɔ 12mm PC Kɔt Panɛl dɛn

Alaw fɔ Tɛmral Ɛkspɛnshɔn

Polikabɔnɛt de bɔku ɛn kɔntrakt wit di tɛmpracha. Ɔl, chanɛl, fastɛns ɛn freym kliarens fɔ disayn wit di rayt muvmɛnt alawɛns pas fɔ klem di panɛl rigid wan we nɔ gɛt ɛkspɛnshɔn spɛs.

Kontrol Panel Diflεkshɔn

Panɛl stiffness de afɛkt ɔl tu di apinɛns ɛn di bɔl ribaund. Fram spays ɛn fastɛns fɔ stɔp fɔ muv pasmak we yu de avɔyd lokal strɛs kɔnsɛntreshɔn rawnd ol dɛn we dɛn dɔn drɔ.

Yuz Fasteners ɛn Gasket dɛn we Fayn

Mɛkanikal fiksin sistem dɛn fɔ sheb prɛshɔn ivin. Kכmpatibl was, gasket εn fכm mεtirial kin εp fכ mek kכnsantreyt lod, ratlin εn dayrεkt mεtal-to- PC strεs.

Protekt di Had-Kɔt Sɔfays

Kip protɛktiv mask in ples we yu de transpɔt, drɔl ɛn instɔleshɔn ɛnisay we i pɔsibul. Nɔ drɛg tul ɔ hadwɔd akɔdin to di say we dɛn kɔt.

Aw fɔ Pik PC Shit fɔ Padel Kɔt Projɛkt

1. Kɔnfɛm Kɔt Tayp ɛn Aplikeshɔn Stɛndad

Tɛl Wallis if di prɔjek na ɛnjɔymɛnt kɔt, kɔmɛshɔnal klab kɔt, panoramik kɔt, tɛmporari instɔleshɔn ɔ kɔmpitishɔn projɛkt. Dɛn fɔ no di lokal ɛn fedareshɔn rikwaymɛn dɛn we dɛn kin yuz bifo dɛn gri fɔ mek di wɔl matirial.

2. Gi Panɛl Dimɛnshɔn dɛn

Gi di panɛl we dɔn dɔn wit ɛn ayt pas fɔ gi di raw sheet saiz nɔmɔ. Big panɛl dɛn kin biev difrɛn frɔm smɔl panɛl dɛn ɛn dɛn kin nid difrɛn strɔkchɔral sɔpɔt.

3. Kɔnfɔm 12mm ɔ Ɔda Tiknɛs

Pan ɔl we 12mm na di targeted spesifikeshɔn na dis prodak pej, Wallis list wan wayda 1–50mm rɛnj. Faynal tiknes fɔ bi frɔm strɔkchɔral dizayn, sɔpɔt spɛshal, ribaund rikwaymɛnt ɛn sefty kɔlkyulɛshɔn.

4. Kɔnfɛm Wan-Sayd ɔ Tu-Sayd Had Kɔtin

Fɔ wan kɔt wɔl we de sho di pleya dɛn, bɔl dɛn, klin ɛn ɔda kɔndishɔn dɛn na ɔl tu di say dɛn, sho us say dɛn nid fɔ gɛt had kɔt ɛn UV protɛkshɔn. Kɔnfɛm di ɛksaktɔl kɔtin kɔnstrɔkshɔn bifo yu mek di bɔlk ɔda.

5. Gi Ɔl ɛn Ɛj Ditiɛl

If panɛl dɛn nid fɔ drɛl ol, slot, CNC mashin ɔ edj prɔsesin, gi wan dimɛnshɔn drɔin we de sho ol dayamita, sɛnta distans, edj distans ɛn tolɛreshɔn rikwaymɛnt.

6. Tɔk bɔt di Klaymat we De na do

Gi di projɛkt ples, tɛmpracha rɛnj, UV ɛksplɔshɔn, humiditi ɛn briz ɛnvayrɔmɛnt so dat dɛn go ebul fɔ evalyu di kɔtin ɛn instɔleshɔn rikwaymɛnt dɛn mɔ kɔrɛkt wan.

Atikul Aplikeshɔn dɛn fɔ Anti-Skratch Polycarbonate sheet

Di sem kɔmbaynshɔn fɔ transparency, impak resistans ɛn abrasion-resistant kɔtin yusful insay industrial, kɔmɛshɔnal ɛn protɛktiv glazing aplikeshɔn usay ɔdinari polycarbonate kin skrach tu izi.

Manufakchurin ɛn Kwaliti Kɔntrol

Had-koted polycarbonate fɔ spɔt ɛn sefty glazing nid fɔ kɔntrol ɔl tu di bays PC sheet ɛn di koting prɔses. Wallis de du projɛkt-bɛs inspekshɔn fɔ sɔpɔt kɔnsistɛns optik ɛn sɔfayz pefɔmɛns.

• Tiknes ɛn dimɛnshɔnal inspekshɔn

• Visible layt transmishɔn ɛn haz inspekshɔn

• UV aksɛleret ɛj ɛvalueshɔn

• Impekt resistans evalueshɔn

• Abrashɔn ɛn skrach rɛsistɛns tɛst

• Had-kɔtin adheshon tɛst

• Inspekshɔn fɔ di we aw di wɔl de luk

• Projek-spɛsifi k sampul verifyeshɔn bifo bɔlk saplai

Wokshɔp ɛn Had-Kɔtin Prodakshɔn

Klin ɛn Mentɛnans fɔ Had-Kɔt PC Panɛl dɛn

Yuz Tul dɛn fɔ Klin we Nɔ De Abrasive

Yuz saf klos, klin wata ɛn klin prɔdak dɛm we dɛn kɔnfyus se i kɔmpitabl wit polycarbonate ɛn di had kɔtin. Nɔ yuz abrasive pads we kin pwɛl di transparent surface smɔl smɔl.

Kɔnfɛm Kwɛmyuɛl Kɔmpatibiliti

Nɔ tink se ɔl di glas klin ɔ sɔlvɛnt fayn fɔ polikabɔnɛt. If dɛn nid strɔng klin, disinfɛktan ɔ kemikal fɔ pul grafiti, tɛst dɛn pan sampul ɔ aks fɔ rɛkɛmɔndeshɔn fɔ di kemikal-kɔmpatibiliti fɔs.

Inspek Fasteners ɛn Panel Muvmɛnt

Di kɔt mentenɛns fɔ inklud fɔ inspɛkt panɛl fiksin, gasket, freym muvmɛnt ɛn sɔfays damej. Lus hadwae ɔ muvmɛnt pasmak kin afɛkt di panɛl sef ɛn ple bihayvya ivin if di sheet insɛf nɔ pwɛl.

Kastom Manufakchurin fɔ Padel Kɔt Bilda dɛn

Wallis de sɔpɔt kɔt manifakta dɛn, spɔt-ikwipmɛnt kɔmni dɛn, distribyushɔn ɛn prɔjek kɔntrakta dɛn we nid kɔstɔmayz had-kɔt polikabɔnɛt panɛl dɛn.

• 12mm padel kot panɛl suplai

• 1–50mm kɔstɔmayt tiknɛs rɛnj

• Kastom sheet ɛn finish panɛl dimɛnshɔn dɛn

• Kla ɛn kɔstɔmayt kɔlɔ dɛn

• UV -resistant sɔfayz tritmɛnt

• Had anti-skrat kɔtin

• Projek-spɛsifi k kɔtin-sayd kɔnfigyushɔn

• CNC mashin ɛn drɔlin rikwaymɛnt dɛn

• Sampul tɛst we dɛn de du

• Kastɔm ​​protɛktiv masking

• Ekspɔt pakej dɛn

• OEM / projɛkt-bɛs saplai

Infɔmeshɔn we Yu Nid fɔ Wan Kɔt Kɔt

• Kot tayp ɛn target makit

• Rikwayd panɛl tik

• Finished panɛl wit ɛn ayt

• Kwantiti we dɛn nid

• Fram spacing ɛn sɔpɔt dizayn

• Hol dayamita ɛn ol pozishɔn dɛn

• Wan-sayd ɔ tu-sayd kɔtin rikwaymɛnt

• UV ɛksplɔshɔn ɛn ɔda klaymat

• Rikwayd layt transmishɔn ɔ haz target

• Spɔt, bildin ɔ sefty standad we dɛn kin yuz

• Di we aw dɛn kin pak di tin dɛn

• CAD / PDF drɔin usay i de

Globɛl B2B Saplai

Wallis de saplae had-coted polycarbonate sheets to padel court manifacturers, spot-fasiliti suplaiers, transparent sefty-glazing kompini, ikwipment manifakta en distributors we nid customized outdoor and impact-resistant panels.

Di Kɔmni Ɛvride Ɔpreshɔn

Di Fidbak we di Kastamɔ dɛn kin gi

Wallis de fos pan stebul shit kwaliti, projɛkt kɔmyunikeshɔn, sampul verifyeshɔn ɛn rispɔnsiv sapɔt sɔpɔt fɔ intanashɔnal polikabɔnɛt shit bayer dɛn.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 12mm Padel Court PC Sheet

Dis prodakt na PET sheet ɔ polycarbonate sheet?

Dis prodak na polikabɔnɛt / PC shit , nɔto PET . Di kɔrɛnt prodak mɔdel, tɛknikal kɔntinyu ɛn matirial diskripshɔn ɔl de tɔk bɔt had-kɔt polikabɔnɛt.

12mm polycarbonate na otomatik apruv fo padel kot?

Nɔ, na tik nɔmɔ nɔ de sho if pɔsin fɔ fala di lɔ. Di kɔmplit wɔl sistɛm fɔ evalyu fɔ stiffness, bol ribaund, surface smoothness, mawntin, strɔkchɔral sefty ɛn aplikebul lokal ɔ kɔmpitishɔn rikwaymɛnt.

Wetin na di layt transmishɔn fɔ di klia PC sheet?

di sεmpl we dεn tεst we de na di list naw de sho lεk 90% visible lait transmishכn . Faynal valyu dɛn fɔ kɔnfyus fɔ di prodakshɔn tik, kɔtin ɛn kɔlɔ we dɛn ɔda.

Wetin na di listed haze value?

Di tɛst tebul we de naw de sho di haz dɔŋ 0.5% . Baya dɛn we nid kɔntrakt ɔptik spɛsifikɛshɔn fɔ aks fɔ di aplikebul tɛst ripɔt fɔ di batch we dɛn dɔn ɔda ɔ di sampul we dɛn dɔn gri fɔ.

Wetin mek di sheet nid fɔ gɛt anti-skrach kɔtin?

Polikabɔnɛt gɛt fayn fayn impak rɛsistɛns bɔt in say we dɛn nɔ trit kin skrach izi wan pas glas. Wan had kɔtin de mek di abrashɔn rɛsistɛns bɛtɛ we dɛn de klin, kɔntakt bɔl, instɔleshɔn ɛn nɔmal ɔpreshɔn.

UV protɛkshɔn nid fɔ de fɔ di padel kɔt dɛn we de na do?

UV protεkshכn imכtant fכ autdoor polycarbonate biכs fכ lכng tεm san layt kin כda we kin kכntribyut fכ yכlכ εn chenj in optik כ mεkanikal pεrformεns.

Yu tink se dɛn kin kɔt ɔl tu di say dɛn na di polikabɔnɛt we at fɔ kɔt?

Had-kɔtin kɔnfigyushɔn fɔ kɔnfɔm akɔdin to di prɔjek. If ɔl tu di say dɛn go de na di pleya dɛn, bɔl dɛn, klin ɔ wɛda, tɔk klia wan se dɛn nid fɔ protɛkt di say dɛn we tu sayd we yu de aks fɔ di kot.

Wallis kin kɔstɔmayt di panɛl dimɛnshɔn dɛn?

Yɛs. Wallis list standad saiz inklud 1020 × 2040 mm, 1220 × 2440 mm, 1995 × 1995 mm ɛn 1995 × 2495 mm, wit kɔstɔm dimɛnshɔn dɛn we de akɔdin to prodakshɔn fisibiliti.

Yu tink se dɛn kin drɔ di PC sheet ɔ CNC mashin?

Yes, dɛn kin mek polycarbonate wit mashin wit fayn tul dɛn ɛn prɔsesin paramita dɛn. Fɔ padel projɛkt, gi di ɛksaktɔl ol dayamita, pozishɔn ɛn edj distans bikɔs fastening jɔyometri afɛkt strɔkchɔral pefɔmɛns.

Yu tink se di panɛl nid ples fɔ mek i go ebul fɔ mek di ples wam?

Yɛs. Polikabɔnɛt de chenj di dimɛnshɔn wit di tɛmpracha. Di mawntin sistem fɔ gi di rayt kliarens ɛn nɔ fɔ klem di shit so tayt dat di tɛmal muvmɛnt go mek i strɛs pasmak.

12mm PC sheet kin tinap fɔ bɔl impak ɛn pleya kɔntakt?

Polikabɔnɛt gɛt ay impak rɛsistɛns, bɔt di pefɔmɛns fɔ wan padel wɔl dipen pan di kɔmplit panɛl-ɛn-frɛm asɛmbli. Panɛl saiz, sɔpɔt spɛshal, fiks dizayn ɛn ripit lod kɔndishɔn fɔ di aktual kɔt.

Yu tink se polycarbonate go gɛt di sem bɔl ribaund lɛk glas?

Nɔto ɔtomɛtik wan. Polikabɔnɛt gɛt difrɛn stiffness kwaliti frɔm glas. Di kɔmplit wɔl sistɛm fɔ disayn ɛn tɛst fɔ ajɔst di ribaund bihayvya we dɛn nid fɔ di padel aplikeshɔn we dɛn want.

Yu tink se dɛn kin yuz di sheet we ebi ebi ren de kam ɛn we di wɛda de na do?

Di UV -resistant had-coated gred na fɔ ɔda aplikeshɔn dɛn, bɔt di kɔmplit instɔleshɔn fɔ akɔn bak fɔ di briz lod, drenaj, tɛmal muvmɛnt, fastɛns ɛn di klaymat na di projɛkt ples.

Di anti-skrat kɔtin nɔ de skrach ɔltogɛda?

No surface nɔ fɔ de diskraib as kɔmplit skrach-pruf. di had kotin de impruv skrach εn abrashכn rεsistεns bכku we yu kכmpεr wit we dεn nכ trit PC , bכt abraziv tul dεm, san, agresiv klin כ shap tin dεm kin stil damej di sכfa.

Aw dɛn fɔ klin di polikabɔnɛt panɛl dɛn we gɛt had kɔt?

Yuz sɔft nɔ-abrasive klin matirial ɛn klin dɛn we dɛn dɔn kɔnfyus se i kɔmpitabl wit polycarbonate ɛn di had kɔtin. Nɔ yuz abrasive pad ɛn agresiv sɔlvɛnt dɛn we dɛn nɔ chɛk.

Wallis kin gi sampul bifo bulk prodakshɔn?

Yɛs. Sampul evalueshɔn na rikɔmɛnd fɔ chɛk optik klia, kɔtin kwaliti, skrach rɛsistɛns, mashin bihayvya ɛn kɔmpatibiliti wit di kɔstɔma in padel kɔt dizayn bifo bɔlk prodakshɔn.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi di tik we dɛn nid, di panɛl dimɛnshɔn dɛn we dɛn dɔn dɔn, kwantiti, layout fɔ di ol, fɔ drɔ di freym, di tin we dɛn nid fɔ kɔt-sayd, di klaymat we dɛn nid, di klaymat we dɛn nid, di kɔt standad we dɛn kin yuz ɛn ɛni optik ɔ strɔkchɔral we dɛn nid.

Rikwest 12mm Padel Kɔt Polycarbonate sheet Sampul dɛn

Yu de luk fɔ 12mm had-kɔt polikabɔnɛt shit spɔlayt fɔ padel kɔt ? Wallis de gi UV -resistant anti-scratch PC panɛl, kɔstɔm saiz ɛn projɛkt-bɛs prɔsesin fɔ kɔt manifakta dɛn, spɔt-fasiliti kɔntrakta dɛn ɛn transparent sefty-glazing spɔlayt dɛn.

Send yu panɛl drɔin, tiknɛs, kwantiti, ol layout, kɔtin rikwaymɛnt ɛn target makit fɔ gɛt wan fayn matirial rɛkɔmɛndishɔn, sampul ɛn faktri kot.