Hard Coated Polikarbonɛt Shit | PC Sheet we nɔ de skrach

Di Had Kɔt Polikabɔnɛt Shit frɔm Wallis Plastik na wan ay-pafɔmɛnshɔn plastic panɛl we dɛn mek fɔ aplikeshɔn dɛn we nid bɛtɛ skrach rɛsistɛns, lɔng tɛm transparency, ɛn ɔdasayz impak trɛnk . Bay we yu aplay wan advans had kotin layt to prɛmiɔm polikabɔnɛt matirial, dis shit de impɔtant fɔ impɔtant sɔfays durabiliti we i de mentɛn di inhɛrɛnt trɛnk ɛn fleksibiliti fɔ PC shit dɛn.

We yu kɔmpia am wit standad polycarbonate sheet, had coated polycarbonate de gi lɔng savis layf, ridyus surface damej, ɛn bɛtɛ apinans ritɛnshɔn , mek am wan fayn chus fɔ industrial, akitekchral, ​​transpɔt, ɛn protɛktiv aplikeshɔn.

Sayz	1020*2040 1220*2440. Di wan dɛn we de wok
Tik we i tik	1-20mm na wan
Tɔk bɔt	Di wear resistance coating we gɛt karakta fɔ Wear ,heat acid ɛn alkali solvent resistance ɛn ect.
Karakta	1. Wear resistance 2. Skratch resistance 3. Hɛt,asid ɛn alkali resistans 4. Strɔng adaptabiliti

Item we dɛn de tɛst	Tul dɛn fɔ Tɛst	Di We dɛn fɔ Tɛst/Di Kɔndishɔn	Rizɔlt
VLT/transmitans we dɛn kin yuz	Di wan we de tɛst transmitans	Dairekt tɛst fɔ du am	90% .
Nɔ klia	Haze Mita we dɛn kin yuz	ASTM D1001 we de na di wɔl	<0.5% .
Adhesion we pɔsin kin gɛt	Testa we de bɔyl	30mins in Boiling wata	5B
Di at we pɔsin kin gɛt	Hardness Pensil Testa fɔ di tin dɛn we de apin	ASTM D3363 we yu de yuz	B-HB
Wear resistans fɔ wɛr	Stiɛl wul Wear resistans tɛstamɛnt	1000g/cm2,strok:3.3cm spid:40 saykl/min 200 saykl	Nɔ skrach nɔ de
I nɔ de mek wata pas	Testa we de bɔyl	Soak in wata 24h	Nɔ chenj nɔ de

Ki Ficha dɛn fɔ Had Kɔt Polikabɔnɛt Shit dɛn

1. Eksɛlɛnt Skrach Resistɛns

Di had kɔtin layt de gi strɔng protɛkshɔn agens di sɔfa abrashɔn, we de mek di sheet fayn fɔ pɔblik, industri, ɛn kɔmɛshɔn ɛnvayrɔmɛnt usay kɔntakt kin bɔku.

2. Ay Optik Klariti

Wit layt transmishɔn we go rich 92% , had kɔt polikabɔnɛt shit dɛn de mek shɔ se yu si klia wan, we de mek dɛn fayn fɔ glaz, protɛktiv kɔva, ɛn displei aplikeshɔn.

3. Supiriɔ Impɛkt Strɔng

Polikabɔnɛt na naturally impak resistant — te to 200 tɛm strɔng pas glas — we de gi fayn fayn sefty pefɔmɛns ivin ɔnda ekstrim kɔndishɔn.

4. UV Protɛkshɔn fɔ Yuz na do

Opshɔnal UV-rɛsistant kɔtin de mek i nɔ yɔlɔ, ol, ɛn di pefɔmɛns pwɛl, we de mek shɔ se i stebul fɔ lɔng tɛm we dɛn de yuz am na do.

5. Laytwet Bɔt Strɔng

Pan ɔl we i strɔng, polikabɔnɛt stil layt, we de mek i izi fɔ instɔl am ɛn i de ridyus di strɔkchɔral lod.

6. Kεmikכl & Hεt Rεsistεns

Di sɔfayz kɔtin nɔ de mek kɔmɔn kemikal dɛn, ditajɛnt dɛn, ɛn ay tɛmpracha, we de sɔpɔt fɔ yuz am na industrial ɛn tɛknikal ɛnvayrɔmɛnt dɛn.

Ficha dɛn fɔ Had Kɔt Polikabɔnɛt Shit dɛn

Aplikeshɔn fɔ Had Kɔt Polikabɔnɛt Shit dɛn

Ɔtomotiv Indastri

Di ɔtomotiv sɛktɔ de yuz bɔku bɔku Had Kɔt Polikabɔnɛt Skrach Rɛsistant Polikabɔnɛt Shit dɛn bikɔs dɛn layt ɛn impak-rɛsistant nature. Di wan dɛn we gɛt had-kɔt kin mek dɛn nɔ skrach fayn fayn wan, we kin mek dɛn fayn fɔ motoka winda, ɛdlayt kɔva, ɛn panɛl dɛn we de insay. Di we aw dɛn kin de fɔ lɔng tɛm kin mek shɔ se dɛn liv lɔng ivin we dɛn de drayv rɔf, ɛn dɛn kin mek dɛn kɔntinyu fɔ si ɛn sef.

Ilɛktronik Displei dɛn

Insay ilɛktronik divays dɛn, lɛk smart fon ɛn tablɛt, Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheets de wok as kɔva dɛn we de protɛkt pɔsin. We dɛn kɔt dɛn sheet dɛn ya tranga wan, dat kin mek shɔ se di displei dɛn stil klia ɛn nɔ skrach, ɛn dis kin mek di pɔsin we de yuz am gɛt mɔ ɛkspiriɛns ɛn di divays we go de fɔ lɔng tɛm.

Aw fɔ Yuz di Akitekchɔral

Di wan dɛn we de mek akitɔk ɛn di wan dɛn we de mek dizayn kin lɛk fɔ mek polycarbonate sheet dɛn kin chenj ɛn fɔ mek dɛn ebul fɔ du tin klia wan. Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheet kin fɛn yus insay skaylayt, ruf, ɛn dɛkɔretiv strɔkchɔ, we de gi ɔl tu di aesthetics ɛn resilience to envayrɔmɛnt ɛlimɛnt dɛn.

Hard Coated Polycarbonate Scratch Resistant Polycarbonate Sheets dɔn bi indispensable na difrɛn industri dɛm, we de gi wan blend fɔ durability, klia, ɛn versatility. Di aplikeshɔn fɔ had kɔtin de mek shɔ se dɛn sheet ya ebul fɔ bia wit chalenj ɛnvayrɔmɛnt, we de kɔntribyut to dɛn lɔng layf ɛn rilibiliti.

Wetin Mek Yu Pik Wallis Plastik Had Kɔt Polikabɔnɛt?

• Advans Kɔtin Tɛknɔlɔji we de mek shɔ se yu gɛt strɔng adheshon ɛn lɔng-last abrashɔn rɛsistɛns

• Strikt Kwaliti Kɔntrol wit optik, hadnɛs, ɛn durabiliti tɛst

• OEM & Custom Solutions fɔ tik, saiz, ɛn sɔfa tritmɛnt

• Stebul Saplai fɔ Ɔlsay Ɔda

• Prɔfɛshɔnal Tɛknikal Sɔpɔt & Afta-Sɛl Savis

Wallis Plastic de gi rilibul, kɔnsistɛns, ɛn skel sɔlvishɔn fɔ di glob ɔl kɔstɔma dɛn akɔdin to industrial, akitekchral, ​​ɛn kɔmɛshɔn sɛktɔ dɛn.

Wokshɔp & Tɛst Lab : .

Pɔpul bitwin kɔstɔma dɛn ɔlsay na di wɔl

Di wok we di kɔmni de du ɛvride

Di fidbak we di kɔstɔma dɛn kin gi

❓ Kwɛstyɔn dɛn we dɛn kin aks ɔltɛm (FAQ) .

Q1: Wetin na had koted polycarbonate?

A: Na polycarbonate sheet wit taf surface coating we de enhans in resistance to skrat, abrasion, ɛn kemikal, pan ɔl we i de mek i klia klia wan.

K2: Yu tink se dɛn kin mek dɛn sheet ya we gɛt tɛmɔfɔm ɔ bɛn?

A: Yɛs. Dɛn mek wi kɔtin fɔ kɔntinyu fɔ stebul we dɛn de mek di tɛmmofɔm. Duya kɔntakt wi fɔ bɛnd gaydlayn.

Q3: Dɛn fayn fɔ yuz na do?

A: Yɛs. Wit UV protɛkshɔn, wi sheet dɛn kin yuz na do fɔ pas 10 ia we nɔ gɛt bɔku yɔlɔ ɔ lɔs transparency.

Q4: A kin ɔda kɔstɔm saiz ɛn tik?

A: Na so i bi. Wi de gi yu kɔt-to-sayz ɛn CNC prɔsesin savis akɔdin to yu patikyula rikwaymɛnt dɛn.

Q5: Wetin na di minim oda kwantiti (MOQ)?

A: MOQ kin difrɛn bay tik ɛn saiz. Duya aks fɔ kot fɔ no mɔ.