|
Wallis -PETG Shit we de na di wɔl
| Kɔlɔ: | |
|---|---|
| Sayz: | |
| advantej: | |
| Kwantiti: | |
Wallis kala wata wev mɛtal PETG film na wan kɔstɔmayz dɛkɔretiv sɔfays fim fɔ fɔnicha panɛl, wɔl panɛl, kabinɛt domɔt, rital displei, ɔtel intɛriɔ, ɛn branded kɔmɛshɔnal spɛs. I kɔlɔ mɛtal layt ɛn flɔ ripɛl tɛkstɔr de intarakt wit layt fɔ mek dip, muvmɛnt, ɛn wan prɛmiɔm tri-dimɛnshɔnal apinans.
Di film na fɔ lamin ɔ ɔda we fɔ prosɛs pan wan kɔmpatib sabstret; i nɔto sɔlid wata-ripul mɛtal sheet. Di wan dɛn we de mek fɔnicha, panɛl laminatɔ, intɛriɔ kɔntrakta, shɔpfita, dizayna, ɛn distribyushɔn kin spɛsifa di kɔlɔ, wev ifɛkt, glos, dimɛnshɔn, saplai fɔmat, ɛn sɔfayz tritmɛnt fɔ dɛn prɔjek ɛn prodakshɔn prɔses.
Rikwest wan Mɛtalik PETG Film Sampul
Yuz di ɔvaviu fɔ di prɔdak we de dɔŋ ya fɔ pripia fɔ aks kwɛstyɔn. Faynal dimɛnshɔn, kɔnstrɔkshɔn, pefɔmɛns, ɛn prɔsesin kɔndishɔn fɔ kɔnfyus wit Wallis agens di aktual sabstret, adeziv, ikwipmɛnt, finish pat, ɛn ɔda kwantiti.
| Sɔntin | Kɔlɔ wata wev mɛtal PETG dekɔretiv film |
|---|---|
| Brand / Mɔdel | Wallis / Wallis PETG Sheet we de na di wɔl |
| Base Material | PETG dekorativ film |
| Ifɛkt we de mek pɔsin dekɔret | Kɔlɔ mɛtal apinans wit wata wev ɔ ripɛl tɛkstɔr |
| Kɔlɔ ɛn Finish | Kastom mɛtal kɔlɔ, tinted ifɛkt, glos lɛvɛl, mat ifɛkt, ɛn spɛshal finish |
| Fɔmat fɔ di Sapɔt | Tik, waid, rol lɔng, ɔ sheet dimɛnshɔn dɛn we dɛn kɔstɔmayz we dɛn kɔnfyus |
| Sabstret dɛn we Kɔmpatibl | MDF, patikyulabɔd, PVC bod, PET bod, ɛn ɔda tɛst dɛkɔretiv panɛl sabstret dɛn |
| Di we aw dɛn de du di wok | Panel lamination, cutting, ɛn gred-dipɛndent fɔm ɔ rap |
| Aplikeshɔn dɛn | Fɛnichɔ panɛl, kabinɛt domɔt, wɔl fiks, rital fiks, ɔtel intɛriɔ, displei panɛl, ɛn kɔstɔm instɔleshɔn |
| Kastamayzeshɔn | Kɔlɔ, wev tɛkstɔr, glos, dimɛnshɔn, tritmɛnt, saplai fɔmat, ɛn ɛkspɔt pak |
PETG, ɔ glycol-modified polyethylene terephthalate, na thermoplastic polyester we dɛn valyu fɔ taf, surface klia, ɛn prɔsesin fleksibiliti. Insay dis prodak, PETG de kɛr wan kɔlɔ mɛtal dɛkɔretiv ifɛkt ɛn wata-inspired tɛkstɔr we dɛn kin laminate to wan kɔmpitabl panɛl fɔ transfɔm in visible surface.
Di ripɛl patɛn de chenj aw layt ɛn shado de travul akɔdin to di panɛl. Frɔm wan angle di say we de ɔp kin tan lɛk se i kol ɛn i kin sho saful saful; frɔm ɔda wan, di aylayt dɛn kin muv akɔdin to di wev dɛn ɛn mek di panɛl luk dip ɔ mɔ dinamik. Di rizulyt we dɛn kin si kin dipen pan di ripɛl skel, ɔriɛnteshɔn, mɛtal kɔlɔ, glos, layt dairekshɔn, distans fɔ si, ɛn di tin dɛn we de rawnd.
Mɛtal kɔlɔ de introduks kɔntrol riflɛkshɔn ɛn vijual richnɛs we nɔ nid fɔ gɛt sɔlid mɛtal sɔfays. Yu kin tɔk bɔt silva, gold, brɔnz, ros-gold, smɔl smɔl champagne, blu, ɛn ɔda tin dɛn we dɛn kin yuz fɔ tint fɔ mek dɛn go kɔdinɛt wit fɔnicha, layt, sayn, ɔ wan brand palet.
Di wata wev patɛn de ad ɔrganik muvmɛnt to ɔdasay flat fɔnicha ɛn wɔl panɛl dɛn. I kin mek wan strɔng fokal pɔynt pan risepshɔn dɛsk, ficha wɔl, rital displei, kabinɛt frɔnt, ba panɛl, ɛn ɔspitul intɛriɔ we yu de yuz wan ripit dɛkɔretiv fim sɔfays.
Dairekshɔn spɔtlayt dɛn de ɛmpɛsh brayt aylayt ɛn mɔ dramatik shado, we brayt difyuz layt de mek wan soft shimmer. Dizayn dɛn fɔ rivyu ful-sayz sɛmpul dɛn ɔnda di kɔlɔ tɛmpracha we dɛn bin want, di braytnɛs, di angul fɔ si, ɛn di we aw dɛn fɔ instɔl am bifo dɛn gi dɛn las aprɔval.
Di wan dɛn we de bay we de luk fɔ wata ripɛl finish kin mit ɔl tu di dɛkɔretiv PETG fim ɛn ɛmbos stenlɛs-stiɛl ɔ mɛtal sheet dɛn. Dɛn de mek rilayt vijual tim dɛn bɔt dɛn na difrɛn prodak sistɛm ɛn dɛn fɔ spɛsifa dɛn akɔdin to di instɔleshɔn, prɔsesin, strɔkchɔral, faya, ɛkstirian, ɛn kɔmplians rikwaymɛnt dɛn.
| Disishɔn Faktɔ | Wata Wev PETG Film | Wata Ripple Mɛtal Sheet |
|---|---|---|
| Tayp fɔ Prodakt | Dekorativ surface film fɔ lamination pan wan kɔmpitabl sabstret | Embossed ɔ fɔm dɛkɔretiv mɛtal panɛl |
| Struktrɔ we dɛn dɔn dɔn | Pɔfɔmɛnshɔn dipen pan fim, adeziv, sabstret, bak, ɛn edj dɛn | Metal panɛl prɔpati dɛn dipen pan alɔy, tiknɛs, finish, ɛn sɔpɔt sistɛm |
| Di we aw dɛn de du di wok | Panel lamination, kɔt, ɛn kɔmpitabl fɔm ɔ rap | Metal kɔt, bɛnd, fabrication, fastening, ɔ spɛshal instɔleshɔn |
| Kastamayzeshɔn | Fleksibul kɔlɔ, tint, glos, wev apinans, ɛn saplai dimɛnshɔn | Metal alɔy, panɛl gej, ripɛl dip, kɔlɔ kɔtin, ɛn fabrikeshɔn |
| Tipik Fit we dɛn kin yuz | Fɛnichɔ, kabinɛt, rital, ɛn laytwɛt intɛriɔ dɛkɔretiv panɛl dɛn | Akitekchɔral mɛtal wɔl, siling, kladin, ɛn tin dɛn we dɛn mek |
Yuz di fim pan kɔmpatib kabinɛt frɔnt, wodrɔb aksɛn, drɔwa fes, fɔnicha sayd panɛl, risepshɔn kɔnta, tebul, ɛn ficha kɔmpɔnɛnt dɛn. Fɔ dimand ɔrizɔntal sɔfays, kɔnfɔm skrach, stɛyn, ɔt, ɛn kemikal rɛsistɛns wit di intended finish ɛn yuz kɔndishɔn dɛn.
Wata wev mɛtal panɛl dɛn kin ad atmosfɛs to ɔtel lɔbi, rɛstɔrant, ba, klab, ɔfis, risepshɔn eria, apatmɛnt insay, ɛn rezidenshɛl ficha wɔl. Fɔ kɔdinɛt di wef dairekshɔn ɛn layt plan kin mek panɛl dɛn we de nia de rid as wan kɔntinyu dizayn.
Displei kaunta, shelf, prodak bakdrop, brand wɔl, sayn panɛl, ɛgzibishin bɔt, ɛn stoa fiks kin yuz mɛtal PETG fim fɔ mek wan mɛmbaful fokal sɔfays ɛn kɔdinɛt kɔlɔ dɛn akɔdin to bɔku rital ples dɛn.
Dizayn dɛn kin spɛsifa di fim fɔ di art panɛl dɛn, di displei ficha dɛn, dɛkɔretiv patishɔn dɛn, ikwipmɛnt kɔva dɛn, ɛn ɛgzibishin ɛnvayrɔmɛnt dɛn usay dɛn nid fɔ mek wan kɔlɔ mɛtal ripɛl apinɛns. Kɔnfɛm fɔm limit ɛn ɛni faya, ilɛktrik, impak, ɔ pɔblik-spɛs we dɛn nid fɔ di asɛmbli we dɛn dɔn dɔn.
Di fim de gi kɔmpatibl fɔnicha ɛn intɛriɔ panɛl dɛn wan mɛtal ripɛl apinans we nɔ mek di say we pɔsin kin si frɔm wan sɔlid ɛmbos mɛtal shit. Dis kin gi mɔ fridɔm fɔ pik di sabstret, fɔ kɔdinɛt di kɔlɔ, fɔ prodyuz panɛl, ɛn fɔ riples di strateji.
PETG de gi wan taf dɛkɔretiv sɔfays fɔ nɔmal indo panɛl yuz. Nɔmal wan, dɛn kin klin di fim wit saf klos, wata, ɛn ditajɛnt we nɔ gɛt wan bɔt. Eksakt skrach, stɛyn, impak, ɔt, ɛn kemikal rɛsistɛns dipen pan di kɔtin ɛn kɔnstrɔkshɔn ɛn dɛn fɔ validet am fɔ di aplikeshɔn.
Di kɔlɔ ɛn tɛkstɔr we dɛn kin kɔntrol kin ɛp di wan dɛn we de mek panɛl fɔ kɔdinɛt fɔnicha, di ficha dɛn na di wɔl, ɛn di rital fiks dɛn akɔdin to wan prɔdak layn ɔ intɛriɔ projɛkt we gɛt bɔku say dɛn. Samplε dεm we dεn apruv fכ difayn akseptabl kכla, glos, wev orientεshכn, εn apinεns tכlerεns.
Wallis kin tɔk bɔt kɔstɔm mɛtal kɔlɔ, tint ifɛkt, wata wev apin, glos ɔ mat finish, tik, waid, rol lɔng, sheet saiz, funkshɔnal tritmɛnt, ɛn pak. Kastom fisibiliti ɛn minim ɔda rikwaymɛnt dɛn dipen pan di spesifikeshɔn we dɛn aks fɔ.
Sheb di sabstret, panɛl dimɛnshɔn, edj kɔnstrɔkshɔn, instɔleshɔn ples, layt we dɛn de ɛkspɛkt, distans fɔ si, di we aw dɛn de klin, trafik lɛvɛl, ɛn ɛni ɔt, humiditi, impak, faya, ɔ rigyuletɔri rikwaymɛnt.
Gi wan kɔlɔ rɛfrɛns ɛn no if di prɔjek nid subtil shimmer ɔ strɔng riflɛkshɔn. Kɔnfɛm di ripɛl skel, di tɛkstɔr dairekshɔn, glos lɛvɛl, panɛl-to-panɛl alaynɛshɔn, ɛn akseptabl apinɛns ɔnda di layt we dɛn want.
Spɛsifik di adeziv sistɛm, di prɛparashɔn fɔ di sɔfays, di ikwipmɛnt fɔ lamin, tɛmpracha, prɛshɔn, layn spid, fɔ kol, fɔ kɔt, ɛn ɛnitin we dɛn nid fɔ mek ɔ rap. Dɛn fɔ tek tɛm ol di tin dɛn we dɛn dɔn mek wit mɛtal ɛn we gɛt tɛkstɔr fɔ mek dɛn nɔ gɛt mak, distɔrshɔn, kɔntaminɛshɔn, ɔ fɔ mek dɛn nɔ bon di sem we.
Laminate di proposed film to di aktual sabstret yuz prodakshɔn sɛtin. Rivyu bonding, kala, wev difinishɔn, glos, alaynɛshɔn, edj kwaliti, klin rispɔns, rɛsistɛns rikwaymɛnt, ɛn apinɛns ɔnda prɔjek layt bifo yu apruv bɔlk prodakshɔn.
Gi di dimɛnshɔn dɛn we dɛn nid, di saplai fɔmat, kwantiti, pak, di delivri kɔntri ɔ pɔt, ɛn di tɛm we dɛn want fɔ du am. Dɔn Wallis kin kɔnfɔm di kɔstɔmayshɔn fisibiliti, sampul arenjmɛnt, prodakshɔn rikwaymɛnt, ɛn kot.
Klin di say we yu dɔn dɔn wit sɔft klos ɛn mild ditajɛnt, dɔn dray am. Nɔ yuz abrasive pad, bled, strɔng sɔlvɛnt, kɔnsɛntret kemikal, ɔt pasmak, ɛn wata we de tinap fɔ lɔng tɛm pas dɛn dɔn tɛst di rayt fim ɛn di panɛl kɔnstrɔkshɔn we dɔn dɔn fɔ dɛn kɔndishɔn dɛn de.
PETG na risaykul tɛmplastik usay dɛn gɛt fayn kɔlekɛshɔn ɛn risaykul strim dɛn. Risayklɛbiliti fɔ di kɔmplit dɛkɔretiv panɛl dipen pan di fim, mɛtal layt, kɔtin, adeziv, sabstret, bak, edj matirial, ɛn lokal infrastukchɔ. Di kɔmplians ɔ envayrɔmɛnt klem fɔ kɔnfyus fɔ di ɛksaktɔl prodak we dɛn gi pas fɔ tek am frɔm di polima nem nɔmɔ.
Kɔlɔ mɛtal wata wev ifɛkt fɔ difrɛn dɛkɔretiv panɛl dɛn
PETG surface fɔ furniture, wall panels, retail fixtures, ɛn kɔmɛshɔnal intɛriɔ
Kastom mɛtal kɔlɔ, tint, ripɛl tɛkstɔr, glos, ɛn funkshɔn tritmɛnt
Tik, waid, rol lɔng, sheet saiz, ɛn pak we dɛn kɔstɔmayt
Sɔlv fɔ MDF, patikyulabɔd, PVC bod, PET bod, ɛn kɔmpitabl panɛl dɛn
Sampul evalueshɔn sɔpɔt fɔ panɛl faktri, manifakta, kɔntrakta, ɛn distribyushɔn
Tɔk bɔt Yu Mɛtalik Panɛl Projɛkt
I de kɔba wan kɔlɔ mɛtal apinans wit wan flɔ wata wev tɛkstɔr pan wan PETG dɛkɔretiv sɔfays. Di ripɛl dɛn kin chenj di layt we dɛn kin riflekt ɛn mek di muvmɛnt ɛn dip we pɔsin kin si we dɛn laminate di fim to panɛl we kɔmpitabl.
Nɔ, na PETG dɛkɔretiv fim we dɛn mek fɔ yuz wit kɔmpitabl sabstret ɛn adeziv sistɛm. Sɔlid stenlɛs-stiɛl ɔ mɛtal ripɛl shit dɛn gɛt difrɛn wet, fɔ mek, instɔleshɔn, strɔkchɔral, faya, wɛda, ɛn kɔmplians kwaliti dɛn.
Pɔtɛnɛshɛl sabstret dɛn inklud MDF, patikyulabɔd, PVC bod, PET bod, fɔnicha panɛl, wɔl panɛl, ɛn ɔda dekɔretiv bod dɛn we dɛn dɔn pripia. Di kɔmpatibiliti dipen pan di kwaliti fɔ di sɔfa, adeziv, di ikwipmɛnt, di kɔndishɔn fɔ di prɔses, ɛn di we aw dɛn de yuz am ɛnd, so i fayn fɔ mek dɛn tray fɔ mek di prodakshɔn.
Spɔtlayt dɛn kin mek aylayt ɛn shado dɛn we de muv strɔng, ɛn difyuz layt kin mek yu shayn saf. Rivyu wan ful-sayz sampul yuz di layt pozishɔn we yu want, di bim angle, di kɔlɔ tɛmpracha, di braytnɛs, di panɛl ɔriɛnteshɔn, ɛn di distans fɔ si.
Di fim kin mek pɔsin nɔ gɛt skrach, stɛyn, ɛn mɔstɔ we dɛn kin du ɔltɛm, bɔt i nɔto tin we nɔ go pwɛl ɔ i nɔto kɔmplit watapruf sistem. Di rɛsistɛns dipen pan di kɔtin ɛn kɔnstrɔkshɔn, we wata kin rich di sabstret tru jɔyn, ed, damej, ɔ instɔleshɔn we nɔ fayn.
Standart dɛkɔretiv gred dɛn na dɛn fɔs fɔ indo panɛl ɛn protɛkt ɛnvayrɔmɛnt. Yuz na do nid fɔ kɔnfɔm ɛn tɛst di prɔjek-spɛsifi k fɔ UV stebiliti, wɛda, mɛtal kɔlɔ stebiliti, tɛmpracha sayklin, adhesive durabiliti, sabstret bihayvya, ɛn ed siling.
Yɛs. Wallis kin tɔk bɔt mɛtal kɔlɔ, tint, aw wata wev de luk, glos, mat ɔ spɛshal finish, tik, waid, rol lɔng, sheet dimɛnshɔn, sɔfa tritmɛnt, ɛn pak. Fisibiliti dipen pan di target spesifikeshɔn ɛn ɔda rikwaymɛnt.
Yuz di aktual sabstret, adeziv, ikwipmɛnt, ɛn prodakshɔn sɛtin. Chek adheshon, apinans, kala, glos, ripple difinishɔn, oriɛnteshɔn, kɔt ɛn edj kwaliti, klin rispɔns, rikwayd sɔfays rɛsistɛns, ɛn di panɛl we dɔn ɔnda di prɔjek laytin.
Gi di mɛtal kɔlɔ rɛfrɛns, ripɛl ifɛkt, glos, dimɛnshɔn, saplai fɔmat, kwantiti, sabstret, adeziv, prɔsesin we, finish aplikeshɔn, pefɔmɛns rikwaymɛnt, pak, ɛn dilivri dɛstineshɔn. Projekt pikchɔ ɔ drɔin dɛn kin ɛp fɔ mek di vijual rizɔlt we yu want klia.
