|
Wallis -PETG Shit we de na di wɔl
| Material: | |
|---|---|
| advantej: | |
| Surface: | |
| Kwantiti: | |
Wallis embossed PETG sheet film na wan kɔstɔmayz dɛkɔretiv sɔfa matirial fɔ fɔnicha panɛl, kabinɛt domɔt, wodrɔb, wɔl panɛl, intɛriɔ domɔt, kɔnta, tebultɔp, rital fiks, ɛn dɛkɔretiv bod. Rays tɛkstɔr ad taktil dip ɛn vijual difrɛns we di PETG sɔfays de ɛp fɔ protɛkt kɔmpitabl laminated panɛl dɛn we dɛn de yuz nɔmal indo.
I de insay PETG ɛn rilat GAG/PETG kɔnfigyushɔn dɛn, di fim kin riprodyuz wud gren, lɛda, ston, fabrik, jɔyometrik, linya, ɛn kɔstɔm tɛkstɔr. Di wan dɛn we de mek fɔnicha, panɛl laminata, intɛriɔ kɔntrakta, ɔspitul saplay, shopfita, ɛn distribyushɔn kin sho di kɔlɔ, ɛmbos, tik, waid, fɔmat, sɔfa tritmɛnt, ɛn pak we dɛn nid fɔ mek dɛn prodakshɔn prɔses.
Rikwest wan Embossed PETG Film Sampul
Di tebul we de dɔŋ ya de sɔmariz di Wallis prodak rɛnj we de na di list naw. Faynal kɔnstrɔkshɔn, tik, dimɛnshɔn, tritmɛnt, ɛn prɔsesin kɔndishɔn fɔ kɔnfyus agens di aktual sabstret, adeziv, ikwipmɛnt, pat we dɔn dɔn, ɛn ɔda kwantiti.
| Di Prodak Nem | Dekorativ ɛmbos GAG / PETG film ɔ sheet |
|---|---|
| Matirial / Stayl | GAG / PETG film ɛn sheet kɔnfigyushɔn dɛn |
| Tik we i tik | 0,2–1,0 mm |
| Width we dɛn kin yuz ɔltɛm | 1250 mm, ɛn di ɔda wan dɛn; kɔstɔm dimɛnshɔn dɛn we dɛn kin kɔnfɔm |
| Kɔlɔ | Di kɔlɔ dɛn we dɛn mek fɔ yusɛf de |
| Tekstɔr we dɛn mek | Smɔl, ɛmbos, ɔ kɔstɔm tɛkstɔr |
| Patna Opshɔn dɛn | Wud, lɛda, ston, klos, jɔyometrik, linya, abstrakt, ɛn kɔstɔm dizayn dɛn |
| Aplikeshɔn dɛn | Fɛnichɔ panɛl, kabinɛt, domɔt, wɔl panɛl, rital fiks, ɛn dɛkɔretiv bod |
| Usay i kɔmɔt | Shanghai Wallis, we de na Chaena |
| Fɔ pak tin dɛn | Lus pak fɔ ɛni rol ɔ kɔstɔmayt ɛkspɔt pak |
Embossed PETG film na wan dekorativ thermoplastic surface film wit wan patɛn we dɛn mek fɔ rayz, we dɛn put insay, ɔ we gɛt tɛkstɔr bay wilful. Di ɛmbos de chenj aw di panɛl luk ɛn fil, we de mek wan flat bod ebul fɔ mek bak di tin dɛn we pɔsin kin si we gɛt fɔ du wit wud, lɛda, ston, klos we dɛn mek wit wud, kɔnkrit, fayn gren, ɔ wan jɔyometrik dizayn we gɛt brand.
PETG na glycol-modified copolyester we dɛn valyu fɔ taf, sɔfa klia, ɛn prɔsesin fleksibiliti. Dipen pan di we aw dɛn mek di prɔdak, di dɛkɔretiv sistɛm kin gɛt bak kɔlɔ, printin, wan funkshɔn sɔfays kɔtin, protɛktiv fim, ɔ bak tritmɛnt. Di wan dɛn we de bay fɔ kɔnfɔm di kɔmplit layt strɔkchɔ pas fɔ tek am se ɛvri PETG fim gɛt di sem sɔfa ɛn bonding pefɔmɛns.
Di bɛst tɛkstɔr dipen pan di stayl fɔ di fɔnicha, di panɛl saiz, layt, distans fɔ si, di nid fɔ klin, ɛn di kɔntakt we dɛn de op fɔ. Fayn ɛmbos de gi wan restrained taktil finish, we big ɔ dip patɛns de mek strɔng layt-ɛn-shado kɔntrast ɛn wan mɔ ɛksprɛsiv sɔfays.
| Tekstɔr Famili | Visual ɛn Taktil Ifɛkt | Tipik Aplikeshɔn | Ki Aprɔval Point |
|---|---|---|---|
| Wud Greyn | Linear ɔ natura gren we de ad dip we tan lɛk timba | Kabinɛt, wodrɔb, domɔt, panɛl dɛn na di wɔl, ɛn fɔnicha bod dɛn | Print-to-emboss alaynɛshɔn, gren dairekshɔn, ɛn panɛl maching |
| Tekstur we dɛn mek wit lɛda | Fayn pebbled ɔ strɔkchɔ taktil sɔfays | Lagz fɔnicha, kabinɛt aksɛn, ɔspitul, ɛn rital displei | Tekstɔr skel, glos, klin, ɛn wɛr pan kɔntakt eria dɛn |
| Ston ɔ Kɔnkrit | Mineral-inspired rilif wit visual dip ɛn irɛgyulariti | Wall panɛl, kɔnta, rital fiks, domɔt, ɛn stetmɛnt fɔnicha | Patna ripit, joyn apin, kɔlɔ, ɛn layt |
| Fabrik ɔ Woven | Sɔft vijual tɛkstɔr we dɛn mek bay we dɛn krɔs layn ɔ fayv | Wodrɔb, ɔfis fɔnicha, tin dɛn we de na di wɔl, ɛn di tin dɛn we de insay di ɔtel | Oriɛnteshɔn, dɔti ritɛnshɔn, klin, ɛn sim alaynɛshɔn |
| Jiometrik ɔ Kastɔm | Modan ripit rilif fɔ brand ɔ prodak difrɛns | Ritayl, ɛgzibishin, kɔmɛshɔnal intɛriɔ, ɛn kɔstɔm fɔnicha | Patna ɔna, ripit dimɛnshɔn, ɔriɛnteshɔn, ɛn tul fisibiliti |
Ɛmbos de gi panɛl dɛn fizik tɛkstɔr instead fɔ abop pan grafik dɛn nɔmɔ we dɛn print. Di aylayt, shado, ɛn tɔch rispɔns we kin kɔmɔt kin mek di fɔnicha fil mɔ difrɛn ɛn i kin mek dɛn tink se wud, lɛda, klos, ston, ɔ abstrakt dizayn dɛn dip mɔ.
PETG film kin ɛp fɔ protɛkt wan panɛl we gɛt laminated frɔm rutin skrat, stɛyn, finga prɛnt, abrashɔn, ɛn klin wear. Di tin we go mek di fim nɔ go ebul fɔ bia, dipen pan di we aw dɛn mek di fim, di we aw dɛn kɔt am, di we aw dɛn mek am, ɛn aw dɛn want fɔ yuz am, so di dɛsk, kɔnta, tebul, skul, ɔtel, rɛstɔrant, ɛn ɔda tin dɛn we dɛn kin yuz fɔ du tin we nɔ izi fɔ du, nid fɔ gɛt ripɔt tɛst.
Kɔlɔ ɛn ɛmbos we dɛn kin kɔntrol kin mek di wan dɛn we de mek di tin dɛn ebul fɔ kɔdinɛt di kabinɛt domɔt dɛn, di drɔwa frɔnt dɛn, di panɛl dɛn na di wɔl, di shelf dɛn, ɛn di tin dɛn we dɛn kin yuz fɔ mek di fɔnicha we mach. Samplε dεm we dεn apruv fכ difayn akseptabl kכla, glos, tεkschuכr dip, dεrekshכn, ripit, εn vishכnal tכlerεns.
Wallis kin tɔk bɔt kɔstɔm kɔlɔ, ɛmbos patɛn, glos lɛvɛl, sɔfa tritmɛnt, tik, waid, shit dimɛnshɔn, rol fɔmat, protɛktiv fim, bak tritmɛnt, ɛn ɛkspɔt pak. Fisibiliti ɛn minim ɔda rikwaymɛnt dɛn dipen pan di prɔpɔz spɛsifikɛshɔn ɛn tul.
Put ɛmbos PETG fim to kɔmpitabl kabinɛt domɔt, wodrɔb frɔnt, drɔwa fes, shelf, stɔrɔj fɔnicha, ɛn kɔdinɛt sayd panɛl. Tekstɔr kin ad natura karakta, wan fil we tan lɛk tɛkstayl, ɔ wan difrɛn mɔdan pɔtn to wan ɔda flat panɛl.
Embossed film kin gi dizayn valyu ɛn surface protɛkshɔn fɔ tebul, kɔnta, dɛsk, risepshɔn fɔnicha, ɛn ɔda wok surface. Kɔnfɛm skrach, stɛyn, impak, ɔt, kemikal, hajɛns, ɛn klin rikwaymɛnt fɔ di kɔnstrɔkshɔn we yu dɔn pik bifo yu spɛsifa am fɔ yuz ɔrizɔntal ɔltɛm.
Intɛriɔ domɔt dɛn, patishɔn dɛn, wɔl panɛl dɛn, bakgrɔn wɔl dɛn, ɛn dɛkɔretiv bod dɛn kin yuz ripit ɔ kɔdinɛt ɛmbos fɔ ad dip akɔdin to big say dɛn. Plan di tɛkstɔr dairekshɔn, patɛn ripit, jɔyn, layt, ɛn distans fɔ si bifo prodyuz.
Ɔtel fɔnicha, rɛstɔrant intɛriɔ, ɔfis panɛl, rital displei, shopfit, ɛgzibishin fiks, ɛn branded kɔmɛshɔn spɛs kin yuz kɔstɔm tɛkstɔr fɔ difrɛns sɔfays ɛn kɔdinɛt fɔnicha wit di wayda intɛriɔ kɔnsɛpt.
Flat lamination de bon di film to wan panɛl we dɛn dɔn pripia we de yuz wan kɔmpitabl adhesive, kɔntrol prɛshɔn, ɛn prɔses-spɛsifi k tɛmpracha. Di sabstret flat, klin, mɔstɔ kɔntinyu, adhesive kɔvarej, film tɛnsiɔn, prɛshɔn, kol, ɛn protɛktiv hanlin de afɛkt di say we dɛn dɔn dɔn.
Dɛn kin kɔt di gred dɛn we fit, shep, post-fɔm, tɛmmofɔm, ɔ rap rawnd kɔmpɔnɛnt dɛn we kɔmpitabl. Fɔmabiliti na gred- ɛn jɔyometri-dipɛndent: tik, tɛkstɔr dip, drɔ rɛsɛshɔn, kɔna rayus, tɛmpracha, adhesive, ɛn ikwipmɛnt sɛtin kin chenj di rizɔlt.
Usay dɛn de gi layt we de protɛkt, kip am na in ples tru di rayt kɔnvɔshɔn stej dɛn ɛn pul am akɔdin to di we aw dɛn dɔn gri fɔ du am. Klin di say dɛn we dɛn de wok, di rɔla dɛn, di tebul dɛn, di glɔv dɛn, ɛn di tin dɛn we dɛn pak, de ɛp fɔ mek prɛshɔn mak, dɔst, skrach, glos we nɔ de chenj, ɛn kɔntaminɛshɔn pan tin dɛn we gɛt tɛkstɔr.
Gi di sabstret tayp, panɛl dimɛnshɔn, sɔfayz kɔndishɔn, finish fɔnicha kɔmpɔnɛnt, instɔleshɔn ɛnvayrɔmɛnt, ɛkspɛkt kɔntakt, klin we fɔ klin, ɛn ɛni ɔt, humiditi, impak, faya, hajɛns, ɔ rigyuletɔri rikwaymɛnt.
Pik wan tɛkstɔr we dɔn de ɔ gi wan fizik sampul, drɔin, ɔ dijital rɛfrɛns. Difayn di embos dip, patɛn ripit, ɔriɛnteshɔn, kɔlɔ, glos, taktil fil, print alaynɛshɔn, ɛn panɛl-to-panɛl maching rikwaymɛnt dɛn.
Spɛsifik di tik, waid, rol ɔ shit fɔmat, protɛktiv layt, bak tritmɛnt, adeziv, lamin ɔ fɔm ikwipmɛnt, tɛmpracha, prɛshɔn, spid, saykl tɛm, kol, kɔt, ɛn edj prɔses.
Prɔses wan ripɔt sampul yuz di aktual sabstret, adhesive, ɛn prodakshɔn sɛtin. Inspek bonding, apinans, kɔlɔ, glos, ɛmbos ritɛnshɔn, fɔm bihayvya, edj, klin rispɔns, sɔfays rɛsistɛns, ɛn pefɔmɛns ɔnda di layt ɛn yuz kɔndishɔn we dɛn bin want.
Sheb di kwantiti, pak, dilivri kɔntri ɔ pɔt, target schedule, ɛn ɛni lɛbl ɔ kɔmplians nid. Dɔn Wallis kin ebul fɔ evalyu di spɛsifikɛshɔn, kɔstɔm tul, sampul arenjmɛnt, minim ɔda rikwaymɛnt, prodakshɔn rod, ɛn kot.
Klin di PETG sɔfays dɛn we dɛn dɔn ɛmbos yuz wan saf klos ɛn mild ditajɛnt, dɔn dray dɛn. Dip tɛkstɔr kin kip mɔ dɔst pas smol smol say dɛn, so dɛn fɔ tink bɔt fɔ klin akses we dɛn de pik. Nɔ yuz abrasive pad, bled, strɔng sɔlvɛnt, kɔnsɛntret kemikal, ɔt pasmak, ɛn wata we tinap pas dɛn dɔn tɛst di kɔnstrɔkshɔn we dɛn dɔn gri fɔ bil fɔ dɛn.
PETG na risaykul tɛmplastik usay fayn fɔ gɛda ɛn risaykul strim dɛn de. Risaykul fɔ wan kɔmplit fɔnicha panɛl dipen pan di fim kɔnstrɔkshɔn, kɔtin, protɛktiv layt, adeziv, sabstret, bak, edj matirial, ɛn lokal infrastukchɔ. Envayrɔmɛnt ɔ kɔmplians klem fɔ verify fɔ di ɛksaktɔl prodak we dɛn gi.
0.2–1.0 mm listed tiknes rεnj εn rεgulεr 1250 mm wit
Wud, lɛda, ston, klos, jɔyometrik, linya, ɛn kɔstɔm tɛkstɔr dɛn
PETG ɛn GAG/PETG film ɔ shit kɔnfigyushɔn dɛn
Kastom kɔlɔ, ɛmbos, glos, dimɛnshɔn, tritmɛnt, ɛn pak
Sɔlv fɔ kabinɛt, domɔt, wɔl panɛl, fɔnicha, rital, ɛn ɔspitul intɛriɔ
Sampul evalueshɔn sɔpɔt fɔ fɔnicha faktri, panɛl prɔsesɔ, kɔntrakta, ɛn distribyushɔn
Diskus Yu Embossed PETG Projek
Dɛn kin yuz am as ples fɔ dekɔret ɛn protɛkt pan kɔmpatib fɔnicha ɛn intɛriɔ panɛl dɛn, lɛk kabinɛt domɔt, wodrɔb, drɔwa, tebul, kɔnta, domɔt, wɔl panɛl, rital fiks, ɔtel fɔnicha, ɔfis panɛl, ɛn dɛkɔretiv bod.
di tiknes rεnj we dεn list na 0.2–1.0 mm εn di rεgulεr wit na 1250 mm. Kɔntakt Wallis fɔ kɔnfɔm di dimɛnshɔn dɛn we de, rol ɔ shit fɔmat, protɛktiv fim, kɔnstrɔkshɔn, ɛn fit fɔ yu prɔses.
Di dizayn dɛn we dɛn kin yuz na wud gren, lɛda, ston, kɔnkrit, klos, wev, jɔyometrik, linya, fayn gren, ɛn abstrakt tɛkstɔr. Kastom tul fisibiliti dipen pan di patɛn, ripit, dip, dimɛnshɔn, kɔnstrɔkshɔn, ɛn ɔda we dɛn nid.
Nɔ tink se i de adhesive insɛf. Indastrial dɛkɔretiv fim dɛn kin nid fɔ gɛt kɔmpitabl adhesive, bak tritmɛnt, ɛn kɔntrol lamination prɔses. Kɔnfɛm di kɔnstrɔkshɔn ɛn bonding rɛkɛmɔndeshɔn we dɛn dɔn gi fɔ di sabstret ɛn ikwipmɛnt.
Di gred dɛn we fit kin sɔpɔt fɔm ɔ rap, bɔt di pefɔmɛns dipen pan di fim kɔnstrɔkshɔn, tik, tɛkstɔr dip, pat jɔyometri, drɔ rɛtɛshɔn, rayus, adeziv, ikwipmɛnt, tɛmpracha, ɛn saykl. Dɛn nid fɔ tray fɔ mek di prodakshɔn bifo dɛn gri fɔ mek dɛn du am.
Skratch- ɛn stain-resistant opshɔn dɛn de, bɔt pefɔmɛns na kɔtin- ɛn kɔnstrɔkshɔn-spɛsifi k. Difayn di kɔntakt we dɛn de ɛkspɛkt, klin, kemikal, ɔt, abrashɔn, ɛn trafik lɛvɛl, dɔn tɛst di sampul we dɛn want fɔ tek ɔnda ripɔt kɔndishɔn dɛn.
Standart fɔnicha gred dɛn na fɔ yuz insay os mɔ. Ɔda aplikeshɔn dɛn nid fɔ kɔnfɔm ɛn tɛst di prɔjek-spɛsifi k UV stebiliti, wɛda, kɔlɔ ɛn glos ritɛnshɔn, tɛmpracha sayklɔs, adhesive durabiliti, sabstret bihayvya, ɛn ed siling.
Rimobul dipen pan di adhesive, bak tritmɛnt, sabstret, prɔses, savis tɛm, ɛn envayrɔmɛnt. Wan fɔnicha fim we gɛt strɔng bon kin pwɛl ɔ lɛf tin we lɛf na di panɛl we de ɔnda am, so dɛn nɔ fɔ prɛzɛnt am as kɔva we dɛn kin pul we dɛn nɔ tɛst am.
Gi di tɛkstɔr rɛfrɛns, kɔlɔ, glos, tiknɛs, waid, rol ɔ shit fɔmat, kwantiti, sabstret, adeziv, prɔsesin we, dɔn aplikeshɔn, pefɔmɛns rikwaymɛnt, pak, ɛn dilivri dɛstineshɔn. Di drɔin, foto, ɔ fizik sɛmpul dɛn kin ɛp fɔ mek di kɔstɔm patɛn dɛn klia.
