|
Wallis - PETG Shit we de na di wɔl
Wallis bin de tɔk bɔt am
| Kɔlɔ: | |
|---|---|
| Matirial: | |
| Advantej: | |
| Kwantiti: | |
Wallis skrach-resistant PETG sheet fɔ MDF lamination na wan dɛkɔretiv fɔnicha sɔfa matirial we dɛn dɔn divɛlɔp fɔ kabinɛt domɔt, wodrɔb, fɔnicha frɔnt, wɔl panɛl, rital fiks, ɔfis fɔnicha, ɔtel fɔnicha, ɛn ɔda indo dɛkɔretiv bod dɛn.
I de insay ay-glos ɔ mat finish, klia ɔ kɔstɔmayz kɔlɔ, ɛn shit ɔ rol fɔmat, di PETG sɔfays de ɛp di wan dɛn we de mek fɔnicha fɔ mek panɛl dɛn we smɔl wit kɔntrol vijual kwaliti. Dɛn kin ebul fɔ evalyu di tin dɛn we nɔ de skrach, we nɔ de mek finga prɛnt, we nɔ gɛt stɛyn, we izi fɔ klin, ɛn ɔda tin dɛn we dɛn kin yuz fɔ mek di say we dɛn de, akɔdin to di gred we dɛn dɔn pik ɛn di we aw dɛn gri fɔ du di tɛst.
Wi kin tɔk bɔt tik, waid, lɔng, kɔlɔ, glos, kɔtin, baksayd tritmɛnt, protɛktiv fim, rol kɔr, lɛbl, ɛn ɛkspɔt pak fɔ MDF laminatɔ, kabinɛt faktri, dɛkɔretiv-bɔd prodyusɔ, fɔnicha brand, distribyushɔn, ɛn prɔjek kɔntrakta.
Rikwest wan PETG Lamineshɔn Sampul
| fɔ Aytem | Ditiɛl |
|---|---|
| Di Prodak Nem | Skrat-Resistant PETG Shit fɔ MDF ɛn Dɛkɔretiv-Panel Laminɛshɔn |
| Tin dɛn | PETG sheet ɔ fim; ekzak monolayεr, kכ-εkstrud, kכt, כ kכmכpכsit kכnstrכkshכn we de sכbjεkt to gred kכnfכmeshכn |
| Surface Finish na di wɔl | Ay glos ɔ mat; ɔda taktil ɛn glos opshɔn dɛn we de ɔnda di prɔdak divɛlɔpmɛnt |
| Tik we i tik | Dɛn mek am fɔ yusɛf; tipik sɔs-pej rɛnj 0.15–1.5mm |
| Fɔmat | Shit ɔ rol akɔdin to tik, waid, waynd, prɔsesin layn, ɛn pak we dɛn nid |
| Kɔlɔ | Klia, ful kɔlɔ, tinted kɔlɔ, mɛtal ifɛkt, pal ifɛkt, ɛn kɔstɔmayt kɔlɔ dɛn we dɛn kin sampul |
| Di Opshɔn dɛn fɔ di Surface | Skrach-rɛsistant, anti-finga prɛnt, stɛyn-rɛsistant, izi-klin, kemikal-rɛsistant, ɛn UV -rɛsistant opshɔn dɛn we de ɔnda gred ɛn tɛst kɔnfɔmeshɔn |
| Di Opshɔn dɛn we De Baksayd | Nɔ trit, korona-trit, praym, ɔ ɔda bak tritmɛnt mach to di adhesive ɛn lamination prɔses |
| Tipik Sabstret dɛn | MDF, patikyulabɔd, plai wud, PVC bod, ɛn ɔda kɔmpitabl dɛkɔretiv panɛl dɛn afta dɛn dɔn tɛst |
| Di we aw dɛn de du di wok | Flat lamination, hεt-εn-prεshכn prεsin, kכt, drilin, edj bεnd, εn sεlekt pכst-fכm prכsεs afta validεshכn |
| Aplikeshɔn dɛn | Kabinɛt domɔt, wodrɔb, fɔnicha frɔnt, wɔl panɛl, rital displei, ɔfis fɔnicha, ɔtel fɔnicha, ɛn kɔmɛshɔnal dɛkɔretiv panɛl |
| Kastamayzeshɔn | Tik, waid, lɔng, kɔlɔ, glos, kɔtin, baksayd tritmɛnt, protɛktiv fim, lɛbl, rol kɔr, ɛn pak |
Spɛsifikeshɔn not: Di sɔs pej list PETG , ay-glos ɛn mat finish, wan tipik 0.15–1.5mm tiknɛs rɛnj, shit ɔ rol fɔmat, klia ɛn kɔstɔmayz kɔlɔ, ɛn MDF ɔ dɛkɔretiv-bɔd laminɛshɔn. Eksakt dimɛnshɔn, hadnɛs, glos, kɔtin, adeziv, prɔses winda, MOQ, ɛn tolɛreshɔn nid prodak-grɛd kɔnfɔmeshɔn.
PETG Shit fɔ MDF Laminɛshɔn
PETG na glycol-modified polyester we dɛn kin yuz fɔ klia, kɔlɔ, ay-glos, mat, ɛn fɔmabl dɛkɔretiv sɔfays. Insay fɔnicha manufakchurin, dɛn kin bon PETG sheet ɔ film to MDF ɔ ɔda kɔmpatibl bɔd fɔ mek wan panɛl we dɔn dɔn wit wan kɔntrol dɛkɔretiv fes.
Di PETG layt de gi di kala we yu kin si, glos, tɛkstɔr, ɛn sɔfays protɛkshɔn. Dipen pan di prodakt gred, i kin inklud had kot, anti-finga prɛnt kɔtin, klia protɛktiv layt, print bak, kɔlɔ kɔr, ɔ ɔda kɔnstrɔkshɔn we gɛt bɔku layt.
Fɛnichɔ-sɔfayz prodakt dɛn kin diskrayb as PET , PETG , APET / PETG , ɔ GAG akɔdin to dɛn rɛsin ɛn layt strɔkchɔ. Dɛn nem ya nɔto intachɛnjɛbl pefɔmɛns garanti. Di wan dɛn we de bay fɔ kɔnfɔm di rayt layers, di kɔtin, tik, fɔm bihayvya, ɛn di bonding surface fɔ di prɔdak we dɛn dɔn pik.
MDF de gi wan smol ɛn mashinable bays fɔ flat fɔnicha kɔmpɔnɛnt dɛn. Faynal panɛl kwaliti dipen pan MDF density, fes smol smol, mɔstɔ kɔntinyu, tiknɛs tolɛreshɔn, sanding, klin, adhesive kɔvarej, prɛs, balansin, ed siling, ɛn stɔrɔj.
Di panɛl we dɔn dɔn kin inklud di PETG fes, adeziv, MDF kɔr, rivas-sayd balansin layt, edj bandin, protɛktiv fim, ɛn hadwae. Surface pefɔmans nɔmɔ nɔ de garanti di pefɔmɛns fɔ di kɔmplit kabinɛt domɔt ɔ dɛkɔretiv panɛl.
High-gloss PETG de mek wan riflektiv surface wit strɔng kala dip ɛn wan kɔntempɔral apinans. di ay glos de mek bak dכst, finga prεnt, skrach, sabstεrayt dεfεkt, adhesive patikyula, εn waviness mכr visible, so klin prodakshכn εn surface protεkshכn impɔtant.
Mat gred dεm de ridyus di layt we de riflekt εn i kin gi wan sכft vishכnal εn tכktil ifekt. Anti-finga prɛnt ɛn sɔft-tɔch pefɔmɛns dipen pan di kɔtin, kɔlɔ, glos lɛvɛl, di we aw dɛn de tɛst am, aw fɔ klin am, ɛn aw dɛn wɛr am.
Klia PETG kin lamin oba wan print, kala, mɛtal, wud-greyn, mabul, ɔ ɔda dɛkɔretiv layt. Dɛn fɔ chɛk di kɔmplit kɔnstrɔkshɔn fɔ si if i klia, i gɛt haz, di kɔlɔ we de chenj, di patikyula tin dɛn we dɔn trɔp, bɔbul dɛn, if i kɔmpit fɔ print, ɛn fɔ si if i gɛt adhesive.
Wi kin tɔk bɔt nyutral, bold, pal, mɛtal, tint, ɛn kɔstɔm sɔlid kɔlɔ dɛn. Apruv wan fizik PETG sampul ɛn finish laminated panɛl bikɔs skrin dɛn nɔ de riprodyuz glos, dip, tɛkstɔr, transparency, ɛn mɛtal ifɛkt dɛn kɔrɛkt wan.
Hεd-kכt PETG gred dεm kin impruv rεsistεns to layt skrat, klin mak, εn rutin abrashכn. Di aktual lɛvɛl fɔ difayn yuz wan stet pensil-hadnɛs, Erichsen, Martindale, stɛl-wul, ɔ ɔda tɛst pas wan jenɛral kɔmpiashɔn wit PVC .
PETG kin gi wan smol ay-glos ɔ mat sɔfays fɔ di mɔdan kabinɛt ɛn dɛkɔretiv panɛl dɛn. Fɔ mek i luk ɔltɛm, i nid fɔ kɔntrol di tik, kɔlɔ, glos, MDF pripia, adhesive aplikeshɔn, prɛshɔn, tɛmpracha, kol, ɛn protɛktiv hanlin.
Yu kin klin di fes we nɔ gɛt porous wit sɔft klos, klin wata, ɔ wan mild nyutral ditajɛnt. Stayn ɛn kemikal rɛsistɛns kin difrɛn bay di kɔtin, kɔlɔ, kemikal, kɔnsɛntreshɔn, tɛmpracha, kɔntakt tɛm, ɛn di we aw dɛn klin am.
Klia, opaque, ay-glos, mat, anti-finga prɛnt, pal, mɛtal, ɛn kɔstɔmayz opshɔn dɛn de alaw fɔnicha brand dɛn fɔ divɛlɔp kɔdinɛt prodak kɔllɛkshɔn. Avaylabl ɛn MOQ dipen pan di strɔkchɔ we yu dɔn pik, tik, kɔlɔ, kɔtin, ɛn dimɛnshɔn.
Wan prɛ-finish PETG sɔfays kin ridyus sɔm sprɛy, drɛy, sand, polish, ɛn kɔlɔ-ripa stej dɛn we gɛt fɔ du wit panɛl dɛn we dɛn dɔn lak. Aktual prodakshɔn efyushɔn dipen pan lamination yield, bod pripiamɛnt, adhesive, layn spid, mashining, edging, ɛn ɔda volyum.
| Ficha | Baya Bɛnifit ɛn Rikwayd Vɛrifikɛshɔn |
|---|---|
| Gret we nɔ de mek pɔsin skrach | I de ɛp fɔ ridyus di mak dɛn we pɔsin kin si na di say we pɔsin kin si; kɔnfɔm di ɛksaktɔl kɔtin, tɛst we, lod, saykl, ɛn akseptɛns valyu |
| Opshɔn dɛn we gɛt Ay-Glɔs ɛn Mat | Sɔpɔt difrɛn fɔnicha stayl dɛn; apruv fizik glos, tɛkstɔr, kɔlɔ, ɛn sɔfa-difɛkt standad |
| Anti-Finga Prɛnt Opshɔn | I kin ridyus di tɔch mak dɛn we pɔsin kin si pan di mat ɔ kɔt gred dɛn we dɛn dɔn pik; evaluate pan di intended kala ɔnda aktual laytin |
| Izi-Klin Sɔfays | Sɔpɔt di mentenɛns we dɛn kin du ɔltɛm; tɛst di tin dɛn we dɛn nid fɔ klin, stɛyn, disinfɛktan, di tɛm we pɔsin kin kɔntakt, ɛn di we aw fɔ was |
| Kastom Kɔlɔ ɛn Sayz dɛn | Sɔpɔt brand-spɛsifi k kɔllɛkshɔn ɛn prodakshɔn layn dɛn; kɔnfɔm kɔlɔ tolɛreshɔn, yuzabl dimɛnshɔn, MOQ, ɛn lida tɛm |
| Shit ɛn Rol Fɔmat dɛn | Sɔpɔt difrɛn laminatɔ ɛn prodakshɔn volyum dɛn; kɔnfɔm winding, kɔr, flatnɛs, rol tɛnsiɔn, shit skwea, ɛn pak |
| MDF Lamineshɔn we dɛn kin yuz | I fayn fɔ mek fɔnicha-panɛl prodakshɔn afta adhesive, baksayd tritmɛnt, prɛs saykl, balans layt, ɛn finish-panɛl validɛshɔn |
PETG Surface ɛn Laminated MDF Panɛl
Pensil hadnɛs kin gi yusful sɔfayz kɔmpiashɔn we di standad, pensil pripiamɛnt, angul, lod, kɔndishɔn, ɛn rizɔlt difinishɔn de fiks. Wan valyu frɔm ɔda PETG gred nɔ fɔ transfa to dis prodak we nɔ gɛt ripɔt we de mach.
Erichsen ɔ ɔda instrɔmɛnt skrach tɛst dɛn de aplay wan difayn stayl ɛn lod. Di tɛst kin ɛp fɔ kɔmpia di sɔfays dɛn we dɛn kɔt, bɔt dɛn fɔ tɔk bɔt di tɛst standad, lod, visible-damage krayteria, ɛn sampul kɔnstrɔkshɔn.
Martindale, stɛl-wul, klos-rɔb, ɛn klin-saykl tɛst dɛn de mɛzhɔ difrɛn we dɛn we pɔsin kin kɔntakt ɔltɛm. Fɔnicha brand dɛn fɔ pik wan we we de sho aw dɛn de op fɔ handle, klin, ɛn savis envayrɔmɛnt.
Test kɔfi, ti, ɔyl fɔ kuk, kɔsmɛtik, ink, tin dɛn fɔ klin na os, disinfɛktant, tin dɛn we dɛn mek wit rɔm, ɛn ɔda tin dɛn we gɛt fɔ du wit am bay we yu yuz di kɔnsɛntreshɔn we dɛn dɔn difayn, di tɛm we dɛn kin kɔntakt, di tɛmpracha, di we aw dɛn kin pul am, ɛn di krayteria fɔ aksept.
UV -resistant opshɔn dɛn kin ridyus kɔlɔ chenj ɔnda sɔm indo ɛksplɔshɔn kɔndishɔn dɛn we dɛn dɔn pik. Pɔfɔmɛnshɔn dipen pan rɛsin, pigmɛnt, kɔtin, adeziv, ɔt, layt sɔs, di tɛm we dɛn de ɛkspos, ɛn di we aw dɛn de tɛst am. Nɔ klem universal fade resistance if yu nɔ gɛt prodak-spɛsifi k data.
Evaluate di finish PETG -laminated MDF panɛl, nɔto jɔs di loose film. Adhesive kɔvarej, sabstret sɔpɔt, bod flatnɛs, laminɛshɔn prɛshɔn, kɔntaminɛshɔn, mashin, edj kwaliti, ɛn instɔleshɔn kin inflɔws di pefɔmɛns we dɛn obshɔb.
MDF na di praymar sabstεrayt we dεn dεskrεb fכ dis prodak. Yuz wan bod we smol ɛn stebul wit kɔntrol density, mɔstɔ, tik, ɛn fes kwaliti. Sand mak, fayv, dent, dɔst, ɛn nɔ ivin kin kam fɔ si tru wan say we gɛt ay glos.
Dɛn kin laminat patikyulabɔd afta dɛn dɔn sand am fayn fayn wan, ful-ɔp am, praym am, ɔ yuz fes we dɛn dɔn pripia. Bod porositi, surface integriti, adhesive absכpshכn, mכsichכ, εn edj kwaliti fכ evaluate.
Play wud ɛn bɔku layt bod dɛn kin fayn fɔ sɔm tin dɛn we di fes smol, flat, dray, ɛn i kɔmpitabl wit di adeziv. Dɛn fɔ chɛk di vinɛs jɔyn dɛn, di gren tɛligraf, di void dɛn, ɛn di panɛl muvmɛnt.
PVC bod ɛn ɔda injinɛri sabstret dɛn kin tink bɔt afta dɛn chɛk sɔfays ɛnaji, ɔt rɛsistɛns, dimɛnshɔnal stebiliti, adhesive kɔmpatibiliti, prɛshɔn, kol, ɛn ɛnd-yuz kɔndishɔn.
Big panɛl dɛn kin nid fɔ gɛt fayn balans sheet na di baksay fɔ mek di wɔp nɔ bɔku. Frɔnt PETG tik, rivas laminat, adeziv amɔnt, sabstret tik, mɔstɔ, prɛs saykl, kol, ɛn panɛl dimɛnshɔn fɔ disayn togɛda.
Kɔdinɛt ed-band kɔlɔ, glos, tik, adeziv, kɔna rayus, ɛn jɔyn dizayn wit di PETG fes. Prɔpa edj de ɛp fɔ protɛkt di panɛl kɔr bɔt i nɔ de mek di wan ol kɔmpɔnɛnt watapruf.
Alaw di PETG , MDF, adeziv, balansin matirial, ɛn edj band fɔ rich fayn wokshɔp kɔndishɔn bifo dɛn prosɛs am. Di difrɛns pan tɛmpracha ɛn mɔstɔ kin afɛkt di flat, adhesive wet, strɛs, ɛn warpage.
Sand ɛn klin di MDF akɔdin to di adhesive ɛn finish rikwaymɛnt dɛn. Rimov dɔst, fayv we nɔ tay, ɔyl, mɔs, dent, say dɛn we rayz, ɛn dɔti. If yu gɛt ay glos, yu nid fɔ tek tɛm pripia am mɔ.
Selekt wan adeziv we mach di PETG bak, sɔfayz tritmɛnt, MDF, ikwipmɛnt, layn spid, opin tɛm, aktiveshɔn tɛmpracha, prɛshɔn, kɔring, humiditi, ɔt target, ɛn kemikal ɛksplɔshɔn. Prayma ɔ korona tritmɛnt kin nid fɔ sɔm kɔnstrɔkshɔn dɛn.
di wam pasmak kin mek PETG , chenj di glos, mak di protεktiv film, כ mek di strεs we de insay, we if yu nכ hεt כ prεshכn i kin mek di bכnd wik. Establish wan validet prɔses winda wit di matirial ɛn adhesive spɔlayt dɛn.
Kip di panɛl flat ɛn sɔpɔt am fayn fayn wan we di adeziv ɛn laminat kol ɔ mɛn. Nɔ ivin kol, wan-sayd strɛs, stak prɛshɔn, ɛn fɔs mashin kin ɛp fɔ mek wɔp ɔ sɔfa mak.
Yuz shap, fayn tul dɛn ɛn stebul sɔpɔt fɔ ridyus di chip, mɛlt, krak, vaybreshɔn, ɛn skrach. Optimayz fid spid, spindl spid, tul jɔyometri, ɛkstrakshɔn, protɛktiv-film hanlin, ɛn ed-band aplikeshɔn.
Prodyuz wan ripɔt trayal yuz di aktual PETG , MDF, adeziv, prɛs, tɛmpracha, prɛshɔn, spid, kol, balansin layt, kɔt tul, ɛn edj band. Inspɛkt di adheshon, glos, kɔlɔ, patikyula, bɔbul, flat, skrat, wɔp, ɛn ed kwaliti.
Yu kin yuz ay-glos, mat, anti-finga prɛnt, ɛn kɔstɔmayz PETG sɔfays fɔ flat kichin frɔnt. Dɛn fɔ tɛst kɔmplit domɔt dɛn fɔ si if dɛn gɛt wam, humidity, ɔyl, stɛyn, kemikal fɔ klin, skrat, ed sial, ɛn adhesive durability.
Wodrɔb domɔt, drɔwa frɔnt, dresin tebul, bedsayd kabinɛt, ɛn stɔrɔj sistem kin yuz kɔdinɛt glos, mat, pal, mɛtal, ɔ sɔlid kɔlɔ dɛn. Di komponent dɛn we de nia fɔ yuz wan batch we dɛn dɔn gri fɔ ɛn kɔnsistɛns ɔriɛnteshɔn.
PETG -laminated MDF kin yuz fɔ sɔm sɛlɛkɛt rɛzidɛshɔnal, ɔfis, ɔtel, rital, ɛn kɔmɛshɔnal wɔl panɛl dɛn. Faya pefɔmɛns, jɔyn, fiks, ɛkspɛnshɔn, impak, klin, ɛn lokal bildin rikwaymɛnt dɛn fɔ evalyu sɛpret wan.
Displei kabinɛt, kɔnta, shelf, plinth, risepshɔn dɛsk, ɛn fiks dɛn we gɛt brand kin bɛnifit frɔm di kɔlɔ dɛn we dɛn kin kɔntrol ɛn di say dɛn we izi fɔ klin. Di say dɛn we pipul dɛn kin gɛt bɔku kɔntakt fɔ sho di tin dɛn we dɛn nid fɔ abrashɔn, kemikal, disinfɛktan, impak, ɛn fɔ mek dɛn ripɛnt.
Ɔfis kabinɛt, dɛsk, stɔrɔj yunit, ɔtel kesgud, rɛstɔrant fɔnicha, ɛn risepshɔn eria kin yuz PETG -laminated panɛl dɛn we dɛn dɔn kɔnfyus di wear, klin, stɛyn, ɔt, humiditi, ɛn impak pefɔmɛns we dɛn nid.
Fɛnichɔ ɛn Intɛriɔ Aplikeshɔn dɛn
PETG laminat, PVC film, akrilik laminat, melamin-fes bod, ɛn lak MDF de gi difrɛn kɔmbaynshɔn fɔ apia, fɔm, prɔses kɔmplisiti, ɛn sɔfayz pefɔmɛns. No matirial nɔ de we pas am ɔlsay na di wɔl; di sɛlɛkshɔn fɔ bi bay di ɛksaktɔ gred ɛn di tɛst dɛn we dɛn dɔn dɔn pan di panɛl.
| Selekshɔn Fakta | PETG Laminat | PVC Fɛnichɔ Film | Akrilik Laminat | Mɛlamin-Fɛs Bɔd | Lak MDF |
|---|---|---|---|---|---|
| Di Tipik Apɛndiks | Ay glos, mat, klia, sɔlid, pal, ɔ mɛtal ifɛkt akɔdin to gred | Brayt print, ɛmbos, mat, glos, wud-greyn, ɛn sɔlid-kɔlɔ rɛnj | Dip ay-glos, mat, sɔlid, mɛtal, ɔ transparent vijual ifɛkt dɛn | Sɔlid, wud, ston, print, tɛkstɔr, ɔ sinkroniz dɛkɔ pan bod we dɔn dɔn | Seamless solid kala wit konfigyurebl glos en speshal peint effekt |
| Skrach Pɔfɔmɛnshɔn | Dipen pan PETG strɔkchɔ, had kot, kɔlɔ, glos, ɛn tɛst we | dipεnd pan PVC fכmyuleshכn, tכp kot, εmbos, εn tεst mεtכd | Dipen pan PMMA gred, had kot, surface finish, ɛn test we | Dipen pan rɛsin, ɔvlay, tɛkstɔr, bod gred, ɛn aplikebul standad | Dipen pan di kɔtin kemistri, di kɔtin, di film bil, ɛn aplikeshɔn kwaliti |
| Di we aw dɛn de du di wok | Flat lamination ɛn sɛlɛkɛt post-fɔmin ɔ thermoforming akɔdin to gred | Flat lamination, profayl wrapping, ɛn mɛmbran prɛs akɔdin to gred | Primarily flat lamination, kot, edging, ɛn gred-spɛsifi k fɔm | Panɛl kɔt, drɔlin, routin, ɛn edj band | Sandin, praymin, sprɛy, mɛn, polish, inspekshɔn, ɛn ripɛnt |
| Dizayn Fleksibiliti | Klia, sɔlid, glos, mat, anti-finga prɛnt, mɛtal, pal, ɛn kɔstɔm kɔlɔ dɛn | Rili brayt print, kɔlɔ, tɛkstɔr, ɛmbos, ɛn fɔm opshɔn dɛn | Prɛmiɔm sɔlid kɔlɔ dɛn, transparent ifɛkt dɛn, mɛtalik dɛn, ɛn dip glos | Kɔlɛkshɔn-bɛs dɛkɔ, tɛkstɔr, bod tik, ɛn maching edj | Brayt kɔlɔ maching, gradient, pal, mɛtal, ɛn spɛshal pent ifɛkt |
| Ki Prodakshɔn Risk | Skrat, ɔt distɔrshɔn, bɔbul, adhesive mismatch, sabstret tɛligraf, ɛn wɔpej | Shrinkage, ed lifting, texture distortion, adhesive activation, ɛn fɔm difrɛns | Skrat, chip, krak, bɔbul, adhesive kɔmpatibiliti, ɛn panɛl balans | Chip, ed damej, mɔstɔ na ɛksplɔz kɔt, ɛn dɛkɔ maching | Dɔst, ɔrɛnj pil, kɔrɛkt, difrɛn kɔlɔ, polish, ɛn ripa kɔnsistɛns |
PETG nɔ gɛt klorin, bɔt dis tru tin nɔmɔ nɔ de pruv se panɛl we dɔn dɔn bɛtɛ pas di envayrɔmɛnt. Envayrɔmɛnt klem fɔ sɔpɔt bay prodak-spɛsifi k data fɔ kɔmpɔzishɔn, risaykul kɔntinyu, efyushɔn, ristrikt sɔbstans, manufakchurin, durabiliti, ɛn ɛnd-ɔf-layf opshɔn dɛn.
Risaykul-kɔntinɛnt gred dɛn kin de fɔ sɔm patikyula prɔdak strɔkchɔ ɛn kɔlɔ dɛn nɔmɔ. Rikwest di pasɛnt, matirial sɔs, chen-ɔf-kustodi infɔmeshɔn, pefɔmɛns difrɛns, ɛn verifyeshɔn we apɔynt to di ɛksaktɔ gred.
Indo efyushɔn dipen pan di PETG , kɔtin, printin, adeziv, MDF, balansin layt, edj bandin, ɛn manufakchurin prɔses. Test di komplit panɛl we di target makit nid fɔ gɛt fɔmal efyushɔn klasifikeshɔn.
PETG na tɛmplastik, bɔt prɛktikal risaykul fɔ wan laminated MDF kɔmpɔnɛnt dipen pan separeshɔn, adhesive, kɔtin, kɔlɔ, kɔntaminɛshɔn, kɔlɛkshɔn sistɛm, ɛn lokal infrastukchɔ. Nɔ tɔk bɔt di panɛl we dɔn dɔn as tin we pɔsin kin risaykul ɔlsay if yu nɔ gɛt rod we dɛn dɔn chɛk.
Di wan dɛn we de bay fɔ no di standad dɛn we dɛn nid REACH , RoHS , ebi-mɛtal, ristrikt-sɔbstans, efyushɔn, it-kɔntakt, faya, fɔnicha, ɔ bildin-matirial standad bifo dɛn ɔda. Ripɔt dɛn fɔ mach di rayt fɔmyulashɔn, kɔtin, tik, ɛn prodakshɔn tɛm usay i apɔynt.
Aprɔv PETG kɔlɔ, glos, tɛkstɔr, transparency, kɔtin, tik, ɛn sɔfa kwaliti pan wan fizik sampul. Dɔn apruv wan finish laminated MDF panɛl we dɛn mek wit di intended adhesive, pres, balansin layt, ɛn edj band.
Dɔst, fayv, adeziv patikyula, rɔla kɔntaminɛshɔn, dent, ɛn skrat kin rili si ɔnda ay glos. Mek di tin dɛn we yu de yuz, di tin dɛn we yu de yuz fɔ wok, di say dɛn we yu de wok, di klos dɛn, di rɔla dɛn, di tin dɛn we dɛn de yuz fɔ sheb di fim dɛn, ɛn di we aw dɛn de ol di fim dɛn we de protɛkt di fim dɛn klin.
Di spɛsifikɛshɔn dɛn fɔ bay fɔ difayn tik, waid, lɔng, difrɛn kɔlɔ, glos rɛnj, haz, transparency, sɔfa patikyula, blak spat, skrach, kɔtin dɛfɛkt, protɛktiv-film kwaliti, bak tritmɛnt, flatnɛs, waynd, ɛn pak.
Test initial ɛn kol bond trɛnk, ɔt ol, humiditi, wata ɛksplɔshɔn, edj liftin, kemikal kɔmpatibiliti, tɛmpracha sayklin, ɛn lɔng tɛm panɛl flatnɛs yuz di aktual prodakshɔn kɔnstrɔkshɔn.
Yuz matirial frɔm di sem apruv batch fɔ adjasent fɔnicha frɔnt usay i pɔsibul. Mentɛn kɔnsistɛns mashin dairekshɔn ɛn panɛl ɔriɛnteshɔn, mɔ fɔ mɛtal, pal, brɔsh, tint, ɛn ɔda dairekshɔn ifɛkt dɛn.
Wallis se i de ɔpres bɔku bɔku prodakshɔn fasiliti ɛn sapɔt PVC , PET / PETG , polycarbonate, akrilik, kad matirial, ɛn finish plastic prodak. Fɔ PETG fɔnicha-fim ɔda, di wan dɛn we de bay fɔ kɔnfɔm di prodakshɔn layn, di rɛsin strɔkchɔ, di rod fɔ kɔt, inspekshɔn plan, di traysabiliti, ɛn di dɔkyumentri we dɛn kin yuz fɔ di ɛksaktɔl prɔdak.
Sampul divɛlɔpmɛnt, kɔstɔmayz kɔlɔ maching, tik ɛn wit rivyu, lamineshɔn trayal, sɔfayz tɛst, rol ɔ shit pak, ɛn ɛkspɔt kɔdineshɔn kin tɔk bɔt fɔ lɔng tɛm B2B prɔjek dɛn.
B2B fɔnicha saplai: sɔpɔt fɔ MDF laminatɔ, kabinɛt faktri, fɔnicha manifakta, panɛl prodyusɔ, distribyushɔn, ɛn OEM brand.
Kastom sɔfays divɛlɔpmɛnt: ay glos, mat, anti-finga prɛnt, klia, sɔlid, pal, mɛtal, ɛn prɔjek-spɛsifi k kɔlɔ dɛn.
Fleksibul spesifikeshɔn dɛn: tik, dimɛnshɔn, rol ɔ shit fɔmat, kɔtin, baksayd tritmɛnt, protɛktiv fim, kɔr, lɛbl, ɛn pak.
Sampul ɛn trayal sɔpɔt: fizik sɔfayz sampul ɛn finish-panɛl tɛst bifo bɔlk prodakshɔn.
Kwaliti-kɔntrol planin: gri fɔ inspekshɔn krayteria fɔ dimɛnshɔn, kɔlɔ, glos, sɔfays dɛfɛkt, kɔtin, waynd, flatnɛs, ɛn pak.
Di Prɔdak Dokumɛnt dɛn we De
Wallis de saplae PETG shit ɛn fɔnicha fim to MDF laminatɔ, kabinɛt faktri, dɛkɔretiv-bɔd manifakta, fɔnicha brand, intɛriɔ-matirial distribyushɔn, ɛn prɔjek kɔntrakta. Sɔpɔt kin inklud spɛsifikɛshɔn rivyu, kɔlɔ sampling, trayal matirial, prodakshɔn kɔdineshɔn, inspekshɔn rikwaymɛnt, ɛn ɛkspɔt pak.
Di Kɔmni Ɛvride Ɔpreshɔn
Fɔ gɛt kɔrɛkt kot, gi di PETG ɔ kɔmpɔzit strɔkchɔ, tik, waid, lɔng, shit ɔ rol fɔmat, kɔlɔ rɛfrɛns, glos, tɛkstɔr, skrach tɛst, kɔtin, baksayd tritmɛnt, sabstret, adeziv, prɛs tayp, prodakshɔn spid, kwantiti, ples fɔ go, protɛktiv fim, kɔr, pak, ɛn dɔkyumɛnt dɛn we dɛn nid.
Fɔ wan nyu lamination layn, gi bak MDF gred ɛn tiknɛs, bod mɔstɔ, adhesive data, aplikeshɔn wet, tɛmpracha, prɛshɔn, dwɛl tɛm ɔ fid spid, kol, balansin layt, panɛl dimɛnshɔn, mashin, edj band, ɛn intended savis kɔndishɔn.
Na dekɔretiv polyɛsta sɔfays we dɛn de gi insay shit ɔ rol fɔmat ɛn bon am to MDF yuz wan kɔmpitabl adeziv ɛn kɔntrol lamination prɔses fɔ mek kabinɛt domɔt, fɔnicha frɔnt, wɔl panɛl, ɛn ɔda dɛkɔretiv bod dɛn.
Dɛn difrɛn pan rɛsin ɛn layt strɔkchɔ. PETG na glycol-modified polyester, we GAG kכmכn fכ dεskrεb wan kכ-εkstrud mכlti-layεr strכkchכ. Kɔnfɛm di ɛksaktɔ layers, sɔfayz kɔtin, bak, ɛn prɔsesin bihayvya fɔ di gred we yu dɔn pik.
I kin yuz fɔ kɔntinyu ɔ batch fɔnicha-panɛl prodakshɔn afta validet tik, waynd ɔ flatnɛs, baksayd tritmɛnt, adeziv, tɛmpracha, prɛshɔn, spid, kol, balans layt, mashin, ɛn kwaliti standad.
Di sɔs pej de list wan tipik kɔstɔmayz rɛnj we na 0.15–1.5mm. Faynal avaylabl dipen pan di PETG strɔkchɔ, sɔfayz kɔtin, kɔlɔ, wit, shit ɔ rol fɔmat, prodakshɔn ikwipmɛnt, MOQ, ɛn aplikeshɔn.
Yɛs, di sɔs infɔmeshɔn de sho di sheet ɛn rol fɔmat dɛn. Kɔnfɛm dimɛnshɔn, rol lɔng, kɔr dayamita, wayndin dairekshɔn, jɔyn alawɛns, flatnɛs, pak, ɛn mashin rikwaymɛnt.
Di pej de tɔk bɔt wan prɔdak we nɔ de skrach bɔt i nɔ de gi nɔmba raytin. Rikwest di ɛksaktɔl pensil-hadnɛs, Erichsen, Martindale, stɛl-wul, ɔ ɔda tɛst rizɔlt fɔ di prɔdak kɔd we yu dɔn pik.
No kɔmpiashɔn we de ɔlsay na di wɔl nɔ fayn. Skrach rεsistεns dipכnt pan di εksakεt PETG כ PVC fכmyuleshכn, kכt, glos, tεkschuכr, tiknes, tεst mεtכd, εn akseptans krayteria. Kɔmpia di sampul dɛn we dɛn dɔn tɛst ɔnda di sem we.
Yes, we di MDF smol, dray, stebul, ɛn klin ɛn di PETG bak, adeziv, tɛmpracha, prɛshɔn, tɛm fɔ de, kol, ɛn balans layt de kɔmpitabl. Wan prodakshɔn trayal nid fɔ de.
Adhesive selekshɔn dipen pan di PETG baksayd, MDF, ikwipmɛnt, layn spid, tɛmpracha, prɛshɔn, opin tɛm, ɔt target, humiditi, ɛn kemikal ɛksplɔshɔn. Kɔnsul di pɔsin we de gi di adeziv ɛn tɛst di kɔmplit kɔnstrɔkshɔn.
Bɔku big ɔ tin panɛl dɛn nid fɔ gɛt rivas-sayd balansin matirial fɔ ridyus di wɔp. Di kɔrɛkt balans dipen pan frɔnt PETG tik, rivas laminat, adeziv, MDF tik, mɔstɔ, prɛs saykl, ɛn panɛl saiz.
Yu kin yuz fayn gred fɔ indo flat kichin frɔnt afta yu dɔn tɛst di kɔmplit domɔt fɔ ɔt, humidity, stɛyn, kuk ɔyl, klin, skrach, ed sial, impak, ɛn adhesive durability.
Nɔ. Di PETG fes kin rɛsist insidɛntal mɔstɔ, bɔt di kɔmplit panɛl in mɔstɔ pefɔmɛns dipen pan di MDF, adhesive, balansin layt, edj band, jɔyn, kɔt, instɔleshɔn, ɛn ɛksplɔshɔn durayshɔn.
Wi kin tɔk bɔt di opshɔn dɛn we de agens finga prɛnt, mɔ fɔ mat ɔ spɛshal kɔt sɔfays. Evaluate di aktual kala ɛn glos ɔnda di prɔjek layt ɛn difayn di klin, wɛr, ɛn finga prɛnt tɛst.
Yɛs. Wi kin tɔk bɔt klia, sɔlid, tint, ay-glos, mat, pal, mɛtal, anti-finga prɛnt, ɛn ɔda opshɔn dɛn. Gi wan fizik rɛfrɛns ɛn apruv wan dɔn laminated sampul.
PETG na klorin-fri ɛn tɛmplastik, bɔt di envayrɔmɛnt pefɔmɛns dipen pan kɔmpɔzishɔn, risaykul kɔntinyu, efyushɔn, kɔtin, manufakchurin, savis layf, separeshɔn, kɔlɛkshɔn, ɛn lokal risaykul infrastukchɔ.
Yuz klin, saf maykrofayba klos wit wata ɔ wan mild nyutral ditajɛn. Nɔ yuz abrasive pad, paoda, stɛl wul, bled, shap tul, ɛn sɔlvɛnt we dɛn nɔ gri fɔ yuz. Test kɔmɛshɔnal klin dɛn pan di rayt gred fɔs.
Yɛs. Rikwest wan vijual sampul fɔ kala ɛn glos aprɔval ɛn inɔf trial matirial fɔ evaluate adhesive bonding, flatness, surface kwaliti, skrach, mashin, edj banding, klin, ɛn panɛl balans.
Di sɔs we dɛn dɔn ɔplod nɔ de tɔk bɔt wan fiks MOQ. MOQ dipen pan standad ɔ kɔstɔm kɔlɔ, tik, wit, shit ɔ rol fɔmat, kɔtin, baksayd tritmɛnt, protɛktiv fim, pak, ɛn prodakshɔn sɛtup.
Gi strɔkchɔ, tik, dimɛnshɔn, fɔmat, kɔlɔ, glos, kɔtin, skrach tɛst, baksayd tritmɛnt, MDF spɛsifikɛshɔn, adeziv, prɛs kɔndishɔn, kwantiti, ples fɔ go, protɛktiv fim, kɔr, pak, ɛn dɔkyumɛnt dɛn we dɛn nid.
