|
Wallis -PETG Shit we de na di wɔl
| Material: | |
|---|---|
| advantej: | |
| Surface: | |
| Kwantiti: | |
Wallis wud ifɛkt PVC, PET, ɛn PETG lamination film na wan kɔstɔmayz dɛkɔretiv sɔfays sɔlvishɔn fɔ fɔnicha panɛl, kabinɛt domɔt, wodrɔb, wɔl panɛl, intɛriɔ domɔt, rital displei, ɛn dɛkɔretiv bod. I de rikriet natura wud gren we i de sɔpɔt efishɔnal flat laminɛshɔn, vaykum mɛmbran prɛs, profayl wrap, ɛn sɛlɛkɛt 3D fɔm prɔses.
Di wan dɛn we de mek fɔnicha, panɛl laminatɔ, intɛriɔ kɔntrakta, shɔpfitin saplay, ɛn distribyushɔn kin pik di fim matirial, wud pɔtn, sɔfayz finish, dimɛnshɔn, ɛn pefɔmɛns tritmɛnt fɔ dɛn prodakshɔn nid. Bikɔs PVC, PET, ɛn PETG gɛt difrɛn prɔsesin kwaliti dɛn, di fayn gred fɔ mach to di sabstret, adeziv, ikwipmɛnt, shep, ɛn ɛnd-yuz ɛnvayrɔmɛnt.
Rikwest Wud Greyn Film Samples
PVC, PET, ɛn PETG ɔl kin kɛr wud gren dɛkɔreshɔn, bɔt dɛn nɔ fɔ trit dɛn lɛk di sem tin. PVC na kɔmɔn we dɛn kin pik fɔ fleksibul rap ɛn mɛmbran prɛs, dɛn kin pik PET fɔ stebul dɛkɔretiv sɔfays ɛn flat-panɛl prodakshɔn, ɛn fayn PETG gred dɛn kin kɔba tafnɛs wit fɔm kapabiliti fɔ prɛmiɔm fɔnicha kɔmpɔnɛnt dɛn. Konfam di ekzak konstrakshɔn tru sampul tɛst bifo prodakshɔn.
| Matirial | Tipik Strɔng | Kɔmɔn Prɔsesin Fit | Suitabl Baya Prioriti |
|---|---|---|---|
| PVC Film we dɛn kɔl | Fleksibul, i nɔ de tek bɔku mɔni, ɛn i gɛt bɔku kɔlɔ, tɛkstɔr, ɛn finish | Vaykum mεmbran prεsin, profayl wrap, flat laminεshכn, εn shep kכmכpכnt dεm | Kɔmpleks profayl, brayt dizayn chuk, ɛn kɔst kɔntrol |
| PET Film we dɛn kɔl PET | Stebul surface appearance, klin finish, ɛn ripit dɛkɔreshɔn | Flat lamination ɛn kɔmpitabl profayl-rap aplikeshɔn dɛn | Kɔnsistɛns flat fɔnicha panɛl ɛn izi-keya sɔfays |
| PETG Film we de na di fim | Tafnɛs, sɔfa klia, ɛn gred-dipɛndent fɔm pefɔmɛns | Flat lamination, post-fɔmin, ɛn sɛlɛkɛt thermoforming ɔ 3D aplikeshɔn dɛn | Premium apinans, durability, ɛn fɔm fɔnicha kɔmpɔnɛnt dɛn |
Dis na jenɛral sɛlɛkshɔn gaydlayn pas fɔ gɛt garanti fɔ pefɔmɛns valyu. Film tik, bak ɔ prayma, kɔtin, adeziv, prɔsesin tɛmpracha, prɛshɔn, saykl tɛm, ɛn pat jɔyometri kin chenj di rizɔlt.
| Sɔntin | Wud effekt dekorativ lamination film |
|---|---|
| Di Tin dɛn we Yu Go Yuz fɔ Du | PVC, PET, PETG, ɛn aplikeshɔn-spɛsifi k maltilayer strɔkchɔ dɛn |
| Dizayn dɛn we dɛn mek wit wud | Ok, walnut, maple, tik, ash, grey wud, wud we dɛn dɔn wayt, dak wud, ɛn kɔstɔm rɛfrɛns dɛn |
| Di Finish dɛn we de na di Surface | Mat, ay glos, supa mat, smol, ɛmbos, sɔft-tɔch, anti-skrach, ɛn anti-finga prɛnt opshɔn dɛn |
| Di we aw dɛn de du di wok | Flat laminεshכn, vεkyum mεmbran prεsin, profayl wrap, pכst-fכm, εn kכmpatibl 3D fכm |
| Sabstret dɛn we Kɔmpatibl | MDF, patikyulabɔd, plai wud, PVC bod, PET bod, PETG panɛl, ɛn ɔda fɔnicha sabstret dɛn we dɛn dɔn tɛst |
| Aplikeshɔn dɛn | Kabinɛt, wodrɔb, intɛriɔ domɔt, wɔl panɛl, fɔnicha prɔfayl, rital fiks, ɛn dɛkɔretiv bod |
| Kastamayzeshɔn | Matirial, pɔtn, kɔlɔ, finish, tik, waid, rol lɔng, tritmɛnt, ɛn pak |
Wud ɛfɛkt lamineshɔn fim na wan dɛkɔretiv sɔfa matirial we dɛn print ɛn, usay dɛn nid am, dɛn kin ɛmbos am fɔ mek i gɛt di kɔlɔ, gren, ɛn tɔch karakta we natura timba gɛt. Di fim de bon to wan kɔmpitabl panɛl ɔ profayl fɔ mek wan finish fɔnicha sɔfays wit mɔ prɛdiktibɛl vijual kɔnsistɛns pas natura vinɛr.
Di wan dɛn we de mek di tin dɛn kin kɔdinɛt di kabinɛt domɔt dɛn, di drɔwa frɔnt dɛn, di shelf dɛn, di fɔnicha sayd dɛn, di domɔt dɛn, ɛn di wɔl panɛl dɛn bay we dɛn yuz di sem dizayn famili. Di matirial we dɛn pik ɛn di tritmɛnt we dɛn de trit di fim de sho aw di fim go luk, aw i go ebul fɔ chenj, aw i go biev we i de mek, aw i go biev, aw i go ebul fɔ mek i nɔ ebul fɔ du am, aw i go mek i fayn, ɛn aw i go kɔst.
Flat lamination de bon dekorativ film to wan pripia flat panɛl we de yuz wan kɔmpitabl adeziv, kɔntrol prɛshɔn, ɛn prɔses-spɛsifi k tɛmpracha. Dɛn kin yuz am fɔ kabinɛt panɛl, wodrɔb bod, wɔl panɛl, shelf, domɔt, ɛn fɔnicha kɔmpɔnɛnt dɛn we nid fɔ gɛt wanwɔd.
Vaykum mɛmbran prɛs de drɔ wan kɔmpitabl fleksibul film oba shep MDF domɔt ɛn mold panɛl dɛn. Matirial gred, film tiknes, prayma ɔ bak kɔtin, adeziv, grov dip, kɔna rayus, tɛmpracha, vaykum, ɛn saykl tɛm fɔ wok togɛda fɔ ajɔst stebul kɔvarej.
Profayl rap de kɔba molding, freym, domɔt profayl, ɛn linya fɔnicha kɔmpɔnɛnt dɛn. PETG ɔ ɔda fɔmabl gred dɛn we dɛn dɔn pik kin fit bak fɔ di post-fɔmin ɔ 3D kɔmpɔnɛnt dɛn. Di wan dɛn we de bay fɔ gi drɔin ɔ sampul bikɔs tayt kɔv, dip rɛs, shap kɔna, ɛn big dro rishɔ nid difrɛn fim bihayvya.
Print gren, kɔdinɛt ɛmbos, ɛn sɛlektable glos lɛvɛl kin riprodyuz ɔk, walnut, maple, tik, ash, ɛn kɔntempɔral wud ifɛkt dɛn. Nɔ lɛk natura vinɛa, dɛkɔretiv fim de sɔpɔt ripit patɛn ɛn kɔlɔ kɔntrol akɔdin to fɔnicha kɔllɛkshɔn ɛn big intɛriɔ prɔjɛkt dɛn.
Di fim we dɛn dɔn dɔn kin ɛp fɔ mek i nɔ skrach, stɛyn, finga prɛnt, mɔs, ɛn we i de wɛr ɛvride. Di rɛsistɛns kin difrɛn bay di tin dɛn we dɛn mek, di we aw dɛn kɔt am, di we aw dɛn mek am, ɛn di we aw dɛn mek am, so dɛn fɔ tɛst di dɛsk dɛn, kɔnta dɛn, kabinɛt domɔt dɛn, ɛn kɔmɛshɔnal fiks dɛn we dɛn kin yuz bad bad wan fɔ no if dɛn rial savis kɔndishɔn.
Bɔku bɔku fim matirial dɛn de mek di wan dɛn we de mek di fim balans fɔmabiliti, di we aw di wɔl de luk, di we aw i go te, di we aw di prɔses go kɔmpit, ɛn di badjɔt. Kastom kɔlɔ, print, ɛmbos, glos, dimɛnshɔn, bak, ɛn fɛnshɔnal tritmɛnt dɛn kin sɔpɔt difrɛn prɔdak layn dɛn ɛn rijinal dizayn prɛferɛns dɛn.
Wan fim we dɛn lamin fayn fayn wan de mek wan say we nɔ gɛt porous we nɔmal fɔ klin wit sɔft klos ɛn mild ditajɛnt. Dɛn fɔ avɔyd abrasive pad, shap tul, sɔlvɛnt, ɛn agresiv kemikal pas dɛn dɔn tɛst di patikyula fim gred fɔ dɛn.
Wud ifɛkt fim kin kɔba flat ɔ shep kabinɛt domɔt, wodrɔb frɔnt, drɔwa fes, shelf, batrum kabinɛt, intɛriɔ domɔt, ɛn kɔdinɛt sayd panɛl. di gred fכ sεlekt fכ di flat laminεshכn we dεn pik, mεmbran prεs, כ wrap prכsεs.
Aplay di fim to kɔmpitabl wɔl panɛl, patishɔn, siling ditil, bakgrɔn wɔl, ɔtel fɔnicha, apatmɛnt intɛriɔ, ɔfis fit-ɔut, ɛn dɛkɔretiv bod sistem fɔ introduks wam timba ifɛkt dɛn we yu nɔ yuz natura vinɛa ɔlsay na di prɔjek.
Ritayl shelf, displei kaunta, stoa fiks, sayn panɛl, ɛgzibishin stand, ɛn branded intɛriɔ kin yuz kɔdinɛt wud gren fim fɔ skel prodakshɔn, izi riplesmɛnt, ɛn kɔnsistɛns vijual prɛzɛnteshɔn akɔdin to bɔku say dɛn.
Gi di sabstret tayp, panɛl dimɛnshɔn, sɔfayz kɔndishɔn, grov dip, kɔna rayus, profayl jɔyometri, dɔn aplikeshɔn, ɛn indo savis ɛnvayrɔmɛnt. Drawing ɔ fizik sɛmpul dɛn kin yus mɔ fɔ shep ɛn 3D pat dɛn.
Spɛsifik if dɛn go yuz di fim fɔ flat lamination, vaykum mɛmbran prɛs, profayl wrap, post-fɔmin, ɔ ɔda prɔses. Inklud di kayn adeziv, mashin, tɛmpracha rɛnj, prɛshɔn ɔ vaykum, layn spid, ɛn saykl tɛm we i de.
Pik wan pɔtn we dɔn de ɔ sɛn wan fizik wud sampul, kɔlɔ rɛfrɛns, ɔ dizayn fayl. Difayn di glos, ɛmbos, taktil ifɛkt, skrach rɛsistɛns, anti-finga prɛnt tritmɛnt, stɛyn rɛsistɛns, ɛn klin rikwaymɛnt.
Rɔn di sampul pan di aktual sabstret, adeziv, ɛn prodakshɔn ikwipmɛnt. Chek di bonding, gren alaynɛshɔn, kɔlɔ, glos, strɛch, edj kɔvarej, kɔna difinishɔn, rikavari, sɔfays rɛsistɛns, ɛn apinans afta i dɔn kol bifo yu apruv di spɛsifikɛshɔn.
Sheb di tik, waid, rol lɔng, kwantiti, pak, kɔntri ɔ pɔt we dɛn nid, ɛn di tɛm we dɛn want fɔ du am. Dɔn Wallis kin ebul fɔ evalyu di matirial gred, di kɔstɔmayshɔn skɔp, sampul rod, minim ɔda rikwaymɛnt, ɛn kot.
Di kɔrɛnt fɔnicha kɔlɛkshɔn dɛn de yuz wud ifɛkt fɔ ad wam we dɛn nɔ sakrifays di mɔdan prodakshɔn efyushɔn. Di dairekshɔn dɛn we pipul dɛn lɛk na gren we nɔ klia, sɔfays we nɔ gɛt bɔku glos, kɔdinɛt tɛkstɔr, natura kɔlɔ, ɛn funkshɔnal finish we de ridyus finga prɛnt we pɔsin kin si ɔ smɔl say mak dɛn.
Minimalist furniture wit klin layn ɛn mat ɔk ifɛkt
Dak walnut ɛn smok timba fɔ prɛmiɔm intɛriɔ
Grey ɛn waytwɔsh wud fɔ kɔntempɔral spɛs
Sinkroniz print ɛn ɛmbos fɔ strɔng vijual dip
Sɔft-tɔch, anti-finga prɛnt, ɛn skrach-rɛsistant sɔfays opshɔn dɛn
Kɔdinɛt fim dɛn fɔ kabinɛt, domɔt, wɔl panɛl, ɛn rital fiks
Savis layf dipen pan di kɔmplit sistɛm pas di dɛkɔretiv fim nɔmɔ. Film gred, kotin, sabstret kwaliti, surface pripia, adeziv, ikwipmɛnt sɛtin, ed siling, instɔleshɔn, klin, ɔt, humidity, san layt, ɛn ɛvride wear ɔl de afɛkt lɔng tɛm apinans ɛn bonding.
Dekorativ film kin ridyus dimand fɔ natura vinɛs ɛn ɛp manifakta dɛn fɔ yuz ɛnjinia panɛl sabstret dɛn fayn fayn wan. PET ɛn PETG na risaykul tɛmplastik usay di rayt kɔlekɛshɔn ɛn risaykul strim dɛn de, bɔt risaykul fɔ wan finish laminated panɛl dipen pan in sabstret, adeziv, kɔtin, kɔnstrɔkshɔn, ɛn lokal infrastukchɔ. Envayrɔmɛnt ɔ kɔmplians klem fɔ kɔnfɔm fɔ di ɛksaktɔl spɛsifikɛshɔn we dɛn gi.
PVC, PET, PETG, ɛn aplikeshɔn-spɛsifi k fim opshɔn dɛn
Rialistik wud gren dizayn fɔ flat ɛn shep fɔnicha kɔmpɔnɛnt dɛn
Gred fכ flat laminεshכn, mεmbran prεsin, profayl wrap, εn sεlekt 3D fכm
Mat, glos, ɛmbos, smol, sɔft-tɔch, anti-skrach, ɛn anti-finga prɛnt finish
Kastom patɛn, kɔlɔ, dimɛnshɔn, sɔfa tritmɛnt, ɛn pak
Sampul evalueshɔn sɔpɔt fɔ fɔnicha faktri, panɛl prɔsesɔ, kɔntrakta, ɛn distribyushɔn
Tɔk bɔt Yu Fɛnichɔ Fim Projɛkt
PVC na tin we dɛn kin pik fɔ fleksibiliti, mɛmbran prɛs, ɛn profayl wrap. Bɔku tɛm dɛn kin yuz PET fɔ stebul dɛkɔretiv sɔfays ɛn flat lamination. Suitabl PETG gred dɛn jɔyn tafnɛs, klia, ɛn fɔm pefɔmɛns. Di bɛst chus dipen pan di shep, prɔses, sabstret, pefɔmɛns target, ɛn badjɛt.
Nɔ. Fɔmabiliti de dipen pan gred ɛn kɔnstrɔkshɔn. Dip profayl, tayt rayus, kɔna, ɛn big drɔ rɛsɛshɔn nid kɔmpitabl film, tik, adeziv, ikwipmɛnt, ɛn prɔses sɛtin. Send di pat drɔin ɔ sampul fɔ evalueshɔn ɛn tɛst di fim we dɛn want fɔ mek bifo dɛn prodyuz am.
Kɔmɔn sabstret dɛn na MDF, patikyulabɔd, plai wud, PVC bod, PET bod, PETG panɛl, ɛn ɔda fɔnicha matirial dɛn we dɛn dɔn pripia. Adhesive compatibility, surface cleanliness, flatness, moisture content, porosity, ɛn prɔses kɔndishɔn dɛn fɔ verify tru wan trayal.
I kin pɔsibul we di say we de naw strɔkchɔ fayn, klin, dray, smol, ɛn i kɔmpitabl wit di adeziv. Ol kotin, gris, dɔst, damej, ed dɛn we lɔs, ɔ say dɛn we nɔ ivin kin ridyus di kwaliti fɔ bond, so i nid fɔ pripia ɛn tray fɔ adheshon smɔl.
Di fim surface kin resist rutin moisture ɛn skrat, bɔt i nɔ kɔmplit watapruf ɔ skrat-pruf as finish panɛl sistem. Mɔstɔ kin go insay tru di ed dɛn, di jɔyn dɛn, ɔ say dɛn we dɔn pwɛl. Yuz wan kɔmpitabl sabstret, adeziv, bak, ɛn sial ed dɛn, ɛn pik di rɛsistɛns gred fɔ di aplikeshɔn.
Standart fɔnicha gred dɛn na fɔ yuz insay os mɔ. Ɔda projɛkt dɛn nid fɔ kɔnfɔm ɛn tɛst fɔ UV stebiliti, wɛda, tɛmpracha sayklɔs, wata ɛksplɔshɔn, adeziv durabiliti, sabstret bihayvya, ɛn ed siling fɔ di patikyula ples ɛn di savis layf we dɛn de ɛkspɛkt.
Wap di say wit sɔft damp klos ɛn mild ditajɛnt, dɔn dray am. Nɔ yuz abrasive pad, bled, strɔng sɔlvɛnt, kɔnsɛntret kemikal, ɛn wata we de tinap fɔ lɔng tɛm pas dɛn dɔn tɛst di film we dɛn gi yu fɔ dɛn kɔndishɔn dɛn de.
Yɛs. Wallis kin tɔk bɔt matirial, wud patɛn, kɔlɔ, glos, ɛmbos, taktil ifɛkt, tik, waid, rol lɔng, funkshɔnal sɔfa tritmɛnt, bak, ɛn pak. Kastom fisibiliti dipen pan di target spesifikeshɔn ɛn ɔda rikwaymɛnt.
Gi di fim matirial if yu no, wud dizayn, finish, dimɛnshɔn, kwantiti, sabstret, adeziv, prɔsesin we, pat jɔyometri, pefɔmɛns rikwaymɛnt, pak, ɛn dilivri dɛstineshɔn. Fɔto, drɔin, fizik sɛmpul, ɛn di mashin sɛtin dɛn we de naw de ɛp Wallis fɔ advays wan opshɔn we fit mɔ.
