More Language

Morekisi  Inlay e laminiloeng esale pele bakeng sa Card

125KHz Inlay / 13.56MHz Inlay 
Indastering ea kajeno e ntseng e tsoela pele ea ho etsa likarete, RFID li-prelam sheet li fetohile karolo ea bohlokoa bakeng sa ho hlahisa likarete tsa boleng bo holimo. Maqephe ana a sebetsa e le sebopeho sa mantlha se kopanyang RFID li-inlay - li-chips le li-antenna tse kentsoeng - ho li-layers tse tšoarellang PVC , tse lumellang tlhahiso e ntle ea boima ba likarete tse se nang mabitso.

Moetsi ea ka Sehloohong oa Wallis Inlay e laminiloeng esale pele  Moetsi

 Mabapi le Inlay

Inlay ke bokahare ba karete, bo lipakeng tsa Filimi ea overlay s. Ho fapana le Filimi ea overlay (e sirelletsang bokaholimo), inlay e netefatsa bots'epehi ba karete 'me e ka boela ea beha theknoloji ea likarete tse bohlale joalo ka RFID chips le manakana.
Indastering ea likarete tse bohlale, ho na le mefuta e 'meli ea mantlha ea li-inlay:
Letlapa la mantlha Inlay s - Plain structural core bakeng sa likarete tse tloaelehileng.
RFID Prelam Inlay s – Lishiti tse koaletsoeng ka pele ka RFID lichipisi le manakana.
 125KHz Inlay   13.56MHz Inlay
 PVC PETG PC Inlay
 Pre- Inlay    Pre-prelam

Inlay ho Tlhahiso ea Likarete

PVC Letlapa la mantlha Inlay mts

Tlhaloso e Akaretsang

A PVC leqephe la mantlha ke karolo ea bohlokoa ea karete.
Hangata e arotsoe lipakeng tsa lifilimi tse peli Filimi ea overlay .
E etselitsoe bakeng sa durability, botsitso, le bonolo lamination.
 

RFID Prelam Inlay ts

Tlhaloso e Akaretsang

Sekhechana se kentsoeng pele se kopanya lenakana le chip ka har'a maqephe a PVC pele ho lamination.
E fana ka puisano e se nang mabitso bakeng sa likarete tsa sejoale-joale tse bohlale.
E etselitsoe ho tšoarella haholo le ho kenella ka mokhoa o se nang moeli tlhahisong ea ho qetela ea likarete.
 

125 kHz RFID Inlay s (Maqhubu a Tlase – LF )

Li-inlay tsa 125 kHz ke litharollo tsa maqhubu a tlase RFID tse sebelisoang haholo lits'ebetsong tse hlokang puisano ea nako e khuts'oane, e tšepahalang. Li sebetsa hantle libakeng tse nang le tšitiso ea tšepe kapa ea metsi moo maqhubu a phahameng a ka hlolehang.
 

13.56 MHz RFID Inlay s (Maqhubu a Phahameng – HF )

Li-inlay tsa 13.56 MHz ke litharollo tsa maqhubu a phahameng RFID , tse fanang ka bokhoni bo betere ba data le likarolo tsa ts'ireletso ho feta li-inlay tsa LF . Sena se ba etsa maemo a tloaelehileng bakeng sa litefo le litsamaiso tsa lipalangoang.
 

Mabapi le Wallis :Moetsi ea Tšeptjoang oa Boemo bo Phahameng Inlay

U ka etela fektheri ea Wallis naheng ea China, Mofani ea Phahameng ka ho Fetisisa le Moetsi
Shanghai Wallis Technology Co., Ltd. ke moetsi ea ka sehloohong le mofani oa tharollo ea sebetsanang ka ho khetheha le tlhahiso ea RFID li-inlay, Filimi ea overlay lisebelisoa, le lisebelisoa tsa ho etsa likarete. Ka boiphihlelo ba lilemo tsa theknoloji ea likarete tse bohlale, Wallis e iketselitse botumo bo matla ba ho fana ka lihlahisoa tse tšepahalang, tsa boleng bo holimo tse tšeptjoang ke bareki ba lefats'e.
 
Ha re le Wallis, re hlahisa mefuta e mengata ea li-inlay, ho kenyelletsa:
Letlapa la mantlha Inlay s bakeng sa meaho e tloaelehileng ea likarete
Antenna Inlay s (coil only, no chip) for flexible customization
RFID Prelam Inlay s with embedded chip and antenna for ready-to-laminate applications
 
Li-inlay tsa rona li fumaneha ka maqhubu a fapaneng - 125 kHz ( LF ), 13.56 MHz ( HF / NFC ), le UHF - ho finyella litlhoko tse fapaneng tsa' maraka, ho tloha taolong ea phihlello le boitsebahatso ho isa ho libanka, lipalangoang le lits'ebetso tse bohlale tsa ho lefa.
 

Wallis------ Lihlahisoa

Lihlahisoa tsa Wallis li tšeptjoa ke baetsi ba likarete, mekhatlo ea ’muso, libanka le liofisi tsa khatiso linaheng tse fetang 50.

Tšebeliso ea Inlay e laminiloeng esale pele bakeng sa Karete

Karete ea kamore
Karete ea Molebeli oa ho Kena
Karete ea Resin ea Epoxy
Karete ea chip
  • 3
  • 1
  • 2
Theko e utloahalang Ho feta 10 e nepahetseng line ea tlhahiso, ho le bonolo ho lemoha bongata ba thepa, ho u fa theko e ntle ka ho fetisisa.Mohala o fetang 10 o nepahetseng oa tlhahiso, ho le bonolo ho lemoha thepa e ngata, ho u fa theko e ntle ka ho fetisisa.
  • 3
  • 1
  • 2
Theko e utloahalang Ho feta 10 e nepahetseng line ea tlhahiso, ho le bonolo ho lemoha bongata ba thepa, ho u fa theko e ntle ka ho fetisisa.Mohala o fetang 10 o nepahetseng oa tlhahiso, ho le bonolo ho lemoha thepa e ngata, ho u fa theko e ntle ka ho fetisisa.
  • 3
  • 1
  • 2
Theko e utloahalang Ho feta 10 e nepahetseng line ea tlhahiso, ho le bonolo ho lemoha bongata ba thepa, ho u fa theko e ntle ka ho fetisisa.Mohala o fetang 10 o nepahetseng oa tlhahiso, ho le bonolo ho lemoha thepa e ngata, ho u fa theko e ntle ka ho fetisisa.

Tlhaloso ea SGS

 
SGS, k'hamphani ea machaba e nang le ntlo-kholo ea Switzerland e sebetsanang le lits'ebeletso tsa tlhahlobo, netefatso, tlhahlobo le setifikeiti. Ho lemoha ha SGS ho ka kenyelletsa bokhoni ba bona ba ho lemoha lintho tse fapaneng, litšila, kapa ho se tloaelehe ho lihlahisoa, thepa kapa tikoloho ba sebelisa mekhoa e tsoetseng pele ea tlhahlobo le mahlale. Sena se ka kenyelletsa liindasteri tse fapaneng tse kenyeletsang lijo, meriana, lik'hemik'hale, tikoloho le tse ling.

Ho hlahloba Tlaleho

  • 0
     
    485*295*0.1mm
  • 0
     
    485*295*0.15mm
  • 0
     
    485*295*0.32mm
  • 0
     
    485*295*0.76mm

Kutloisiso Inlay Leqephe

 

Letlapa la inlay ke ntho e sebelisoang ka ho khetheha ho etsa likarete (joalo ka likarete tsa ID, likarete tse bohlale, likarete tsa banka, likarete tsa botho, kapa likarete tsa RFID ). Hangata e sebetsa joalo ka sebopeho sa mantlha sa karete, e behiloeng lipakeng tsa lifilimi tsa Filimi ea overlay nakong ea lamination.

 

Letlapa la inlay le khetholla boholo ba mesebetsi le thepa ea bohlokoa ea karete, ho kenyelletsa le ho tšoarella, ho feto-fetoha ha maemo, 'me maemong a mang, ts'ebetso ea elektroniki haeba e kentsoe ka likarolo tsa RFID .

 

Mefuta ea Inlay Maqephe

Polasitiki PVC Inlay Maqephe
a Entsoe ka polasetiki e tloaelehileng PVC .
Sebeletsa e le motheo oa meralo ea karete ntle le ts'ebetso ea elektroniki.
Hangata e sebelisoa likareteng tse bonolo tse hatisitsoeng (likarete tsa botšepehi, likarete tsa liithuti, likarete tsa botho).

 

RFID / Ntle le ho Kopana Inlay Lipampiri

E na le li-antenna tsa koporo tse kentsoeng le li-microchips.
Numella theknoloji e se nang khokahanyo joalo ka 125KHz, 13.56MHz, kapa UHF maqhubu.
E sebelisoa ho likarete tsa taolo ea phihlello, likarete tsa lipalangoang, likarete tsa ho patala, le lihlahisoa tse lumelletsoeng ke NFC .

 

prelam e khethiloe ( prelam ) Inlay Lipampiri

Li-inlay tse lokiselitsoeng esale pele tse nang le li-antenna le li-chips tse seng li entsoe ka hare ho maqephe a PVC kapa PETG .
Fana ka matla a phahameng le ts'ebetso e bonolo haholoanyane (ho hatisa, ho phunya).
E sebelisoa haholo ho etsa likarete tsa indasteri.

 
 

Tsebiso ea Plain PVC Inlay Maqephe

 

Plain PVC Inlay Maqephe ke likarolo tsa mantlha tse sebelisoang ha ho etsoa likarete. Li entsoe ka thepa ea polyvinyl chloride ( PVC ) ntle le lisebelisoa tsa elektronike tse kang li-chips kapa li-antenna. Karolo ea bona e ka sehloohong ke ho sebetsa e le motheo oa moralo oa karete, ho fana ka matla, ho tšoarella, le sebaka se boreleli bakeng sa ho lamination, khatiso kapa motho ka mong.

Lipampiri tsena li behoa pakeng tsa lifilimi tsa Filimi ea overlay nakong ea ts'ebetso ea lamination, moo mocheso le khatello li kopanyang likarolo ho ba karete e phethiloeng.

 

Melemo ea Plain PVC Inlay Lishiti


E na le Litšenyehelo - Khetho e theko e tlaase ha e bapisoa le RFID kapa lisebelisoa tsa elektroniki.
E fapaneng - E loketse mefuta e mengata ea likarete, ho tloha ho li-ID ho ea ho likarete tsa papatso.
E tšoarella - E hana ho kobeha, ho petsoha, le ho apara letsatsi le letsatsi.
Customizable - E ka hlahisoa ka boholo bo fapaneng, botenya le mebala ho latela litlhoko tsa bareki.
E lumellana le Khatiso - E sebetsa hantle ka khatiso ea offset, khatiso ea skrine, khatiso ea digital, le lamination.
 

 

RFID / Contactless Inlay Maqephe ke eng?
 

RFID (Radio Frequency Identification) / Contactless Inlay Lipampiri ke maqephe a entsoeng ka ho khetheha a nang le likaroloana tsa elektronike tse kentsoeng—tse kang likhoele tsa manakana le li-microchips—tse lumellang likarete ho etsa puisano e se nang mohala.

Lipampiri tsena tsa inlay ke pelo e sebetsang ea likarete tse bohlale tse se nang mabitso, tse li nolofalletsang ho boloka le ho fetisa data ntle le ho kopana le 'mele. Li sebelisoa haholo taolong ea phihlello, lipalangoang, libankeng, le lits'ebetsong tsa NFC .

 

125KHz (Maqhubu a Tlase – LF )


Range: 2-10 cm (e khutšoanyane).
Lebelo la data: Boleng bo butle, bo lekanyeditsweng ba memori.
Tshebetso: E sebetsa hantle haufi le tšepe, metsi, le libaka tse thata.
Tšireletso: Ea motheo, eseng e patiloeng; e loketseng haholoanyane bakeng sa boitsebiso bo bonolo.
Litšenyehelo: Ka kakaretso li tlase ha li bapisoa le HF le UHF .

 

13.56MHz (Maqhubu a Phahameng – HF / NFC )


Bophahamo: ho fihlela ho 10 cm.
Lebelo la Boitsebiso: Lebelo ho feta LF , le ts'ehetsa polokelo ea data e rarahaneng.
Tshebetso: Ho leka-lekana hantle ha sebaka, lebelo le ts'ireletso.
Ts'ireletso: E ts'ehetsa encryption le netefatso (mohlala, MIFARE®, DESFire®).
Maemo: ISO /IEC 14443, ISO /IEC 15693, NFC .

 

UHF (860–960MHz, Ultra-High Frequency)


Range: Ho fihlela ho limithara tse 10 (bolelele ba mefuta).
Lebelo la data: Holimo haholo; e ka bala li-tag tse makholo ka nako e le 'ngoe.
Tshebetso: E molemo ka ho fetisisa bakeng sa ho bala le ho latedisa ka bongata, empa e sa tsitsang haufi le metsi/tshepe.
Tšireletso: E itekanetseng; mekhoa e mecha e ntlafatsa ts'ireletso empa e se matla joaloka HF bakeng sa tšebeliso ea lichelete.
Maemo: ISO /IEC 18000-6C (E PC Gen 2).

 

 

 

Lipampiri tsa prelam ke life ( prelam ) Inlay ?
 

prelam inated Inlay Li-Sheets, tseo hape li bitsoang Inlay e laminiloeng esale pele s, ke li-core sheets tse lokiselitsoeng esale pele tse seng li na le li-antenna tse kentsoeng le li-microchips, tse entsoeng ka laminated ka hare ho lisebelisoa tse tšoarellang tse kang PVC , PET , kapa PETG .

Li sebetsa e le motheo oa ho etsa likarete tse bohlale RFID , tse etsang hore mokhoa oa tlhahiso o sebetse hantle, o tsitsitse, hape o tšepahale. Sebakeng sa ho kopanya li-chips le li-antenna ka thoko, baetsi ba likarete ba ka sebelisa ka kotloloho li-inlays tsa prelam, ebe ba hatisa, ba phunya, le ho qeta likarete ka Filimi ea overlay s.

 

Lintlha tsa Bohlokoa tsa Inlay e laminiloeng esale pele Lipampiri


Sebopeho se Kopanetsoeng - Chip le antenna li entsoe pele ho laminated ka har'a lakane.
High Durability - E hana mocheso, khatello le ho kobeha nakong ea lamination.
Ts'ebetso e tsitsitseng - E netefatsa khokahano e nepahetseng ea chip-to-antenna.
Ts'ebetso e Bonolo - E nolofatsa mehato e meng ea tlhahiso ea likarete joalo ka ho hatisa, ho phunya le ho iketsetsa motho.
Customizable - E fumaneha ka boholo bo fapaneng, maqhubu (125KHz, 13.56MHz, UHF ), le meralo ea li-chip tse ngata.

 

    

Tšebelisano 'moho

Iteanye le rona
形状结合
形状结合备份
  • <span style='font-size:26px;'><strong>Wechat</strong></span>
  • <strong><span style='font-size:26px;'>Linkedin</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp</span></strong>

Inlay FAQ

  • Na PETG Filimi ea overlay e ea tšoarella, 'me na e sireletsa likarete ka nepo?

    Ee, PETG Filimi ea overlay s li sebetsa ka mefuta-futa 'me li ka sebelisoa mefuteng e fapaneng ea likarete. Ho sa tsotellehe hore na u etsa likarete tsa khoebo, likarete tsa boitsebiso, likarete tsa botho, kapa likarete tsa khoebo, PETG Filimi ea overlay s fana ka tšireletso le bentšitsoeng. Li boetse li lumellana le li-printer tsa inkjet le laser, tse etsang hore li tšoanelehe bakeng sa merero e mengata ea ho etsa likarete.

  • Na PETG Filimi ea overlay e ka sebelisoa mefuteng e fapaneng ea likarete?

    Ee, PETG Filimi ea overlay s li sebetsa ka mefuta-futa 'me li ka sebelisoa mefuteng e fapaneng ea likarete. Ho sa tsotellehe hore na u etsa likarete tsa khoebo, likarete tsa boitsebiso, likarete tsa botho, kapa likarete tsa khoebo, PETG Filimi ea overlay s fana ka tšireletso le bentšitsoeng. Li boetse li lumellana le li-printer tsa inkjet le laser, tse etsang hore li tšoanelehe bakeng sa merero e mengata ea ho etsa likarete.

  • PETG Filimi ea overlay ke eng, hona e sebelisoa joang ha ho etsoa likarete?

    PETG Filimi ea overlay ke filimi ea polasetiki e bonaletsang e sebelisoang ho etsa likarete ho matlafatsa ts'ebetso le botle ba eona. E sebelisoa holim'a likarete tse hatisitsoeng ho li sireletsa hore li se ke tsa senyeha ha li ntse li eketsa qetello e benyang, ea setsebi. Sena Filimi ea overlay se entsoe ka PETG (Polyethylene Terephthalate Glycol), polymer ea boleng bo holimo ea thermoplastic e tsebahalang ka ho hlaka le matla a eona.

    Lintlha tsa Bohlokoa:

    1. PETG Filimi ea overlay ke filimi ea polasetiki e bonaletsang.
    2. E ntlafatsa ho tšoarella ha karete le ponahalo.
    3. E entsoe ka PETG , thermoplastic e matla le e hlakileng.

  • PVC e ka sebelisoa hokae?

    1. PVC thepa ea likarete e sebelisoa bakeng sa likarete tsa boitsebiso, likarete tsa ho patala, likarete tsa botšepehi le meputso, likarete tsa limpho, likarete tsa liketsahalo le tsa litekete, likarete tsa linotlolo tsa hotele le likarete tsa lipalangoang.
    2. PVC likarete li fana ka nako e telele le ho feto-fetoha ha maemo bakeng sa ho tšoaroa khafetsa le ho taboha.
    3. Li ka kenyelletsa mekhoa e fapaneng ea theknoloji, joalo ka likhoele tsa makenete, li-chips tsa EMV, RFID / NFC , le libarcode kapa likhoutu tsa QR, ho ipapisitsoe le litlhoko tsa ts'ebeliso.

  • Melemo ea thepa ea karete ea lapeng ke efe?

    1. PET likarete li thusa tikolohong 'me li ka sebelisoa hape.
    2. Li tšoarella haholo 'me ha li khone ho taboha le ho taboha.
    3. PET lintho tse bonahalang li fana ka pepeneneng bakeng sa khatiso e hlakileng le e hlakileng.
    4. PET likarete li na le khanyetso e matla ea lik'hemik'hale, oli, le lihlapolli.

  • Likarete tsa PVC li entsoe ka eng?

    PVC likarete, tse tsejoang hape e le likarete tsa polyvinyl chloride, li entsoe haholo-holo ka mofuta oa polasetiki o bitsoang polyvinyl chloride. PVC ke polymer ea maiketsetso e sebelisoang haholo e tsebahalang ka ho tšoarella ha eona, ho tenyetseha, le ho hanyetsa mongobo le lik'hemik'hale. E sebelisoa hangata lits'ebetsong tse fapaneng, ho kenyelletsa likarete tsa ID, likarete tsa mokoloto, likarete tsa litho le likarete tsa phihlello.

  • U ka reka hokae Lisebelisoa tsa likarete ?

    WALLIS PLASTIC E fana ka tharollo ea sebaka se le seng bakeng sa mefuta eohle ea Lisebelisoa tsa likarete s, re fana ka litlhoko tse khethehileng tsa moreki e mong le e mong le ho fetola lisebelisoa ho tla le karete e khotsofatsang litlhoko tsa bona.

Fektheri FAQ

Qala Morero oa Hao le Rona

Sebelisa Qotsulo ea Rōna e Molemohali
Shanghai Wallis Technology Co., Ltd ke morekisi ea hloahloa ea nang le limela tse 7 ho fana ka Lipampiri tsa Plastiki, Filimi ea Plastiki, Lisebelisoa tsa Card Base, Mefuta Eohle ea Likarete, le Ts'ebeletso e Tloaelehileng ea ho Fapa ho Lihlahisoa tsa Plastiki tse Qetetsoeng.

Lihlahisoa

Lihokelo tse Potlakileng

Ikopanye
      sales@wallis-plastic.com
   +86 13584305752
  No.912 YeCheng Road, sebaka sa Jiading Industry, Shanghai
© COPYRIGHT 2026 SHANGHAI WALLIS TECHNOLOGY CO., LTD. LITOKELO TSOHLE LI SIRELELITSOE.