PVC, PC ani PET Magnetic Stripe Films ka ɲɛsin karti dilanni ma

PVC, PC ani PET Magnetic Stripe Films ka ɲɛsin karti dilanni ma

Wallis bɛ PVC, PC ani PET magɛnni filimuw di karti dilannikɛlaw ma, karti hakilitigiw ka iziniw, lakana sɛbɛnnikɛlaw, fɛn caman tigɛlikɛlaw, fɛnw tilabagaw, ani OEM karti porozɛw. Filimu jɛlen bɛ karti lakanani dacogo, lamini siriyɔrɔ, ani magɛnni sɛrɛkili jɛlen fara ɲɔgɔn kan walasa ka magɛnni kartiw dilan ka ɲɛ.

HiCo ni LoCo magnetic stripe suganditaw bɛ sɔrɔ lotɛli kilisi kartiw, don kartiw, baarakɛlaw ka kartiw, tɔndenw ka kartiw, kantigiya kartiw, bolifɛn kartiw, ID kartiw, wariko kartiw, kado kartiw, ani hakili kartiw hybride. Fɛn minnu bɛ kɛ, u bonya, u ka sɛrɛkiliw wajibiya, u bonya, u jɔyɔrɔ, u kulɛri, u sɛbɛncogo, u dacogo, u foroko dilanni, ani u taamasiyɛnw bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Magnetic Stripe Film ka ɲɛfɔliw

Fɛnɲɛnɛmako labanw ka kan ka dafa ni fɛɛrɛko kunnafonisɛbɛn ye min dabɔra, ni stripe-position drawing ani production sample ye. Baara kɛcogo lakika bɛ bɔ magɛnni hakɛ la, karti jɔcogo, enki, finimugu, laminatɛri, encodeur ani kalanbaga.

Film min bɛ kɛ ni bande magnétique ye ka ɲɛsin karti dilanni ma, o ye mun ye?

Filimu min bɛ kɛ ni magɛnni ye, o ye karti baarakɛminɛn ye min bɛ baara kɛ, min kɔnɔ, sɛbɛnnikɛlan min bɛ se ka magɛnni kɛ. Walasa ka karti lamininenw dilan, a ka c’a la, o sɛrɛkili bɛ don sɛbɛnfura jɛlen dɔ kɔnɔ min bɛ karti sɛbɛnnen ɲɛda lakana ani ka magɛnni kunnafonidilan di.

Karti dilannikɛlaw bɛ magɛnni sɛrɛkili datugulan dalajɛ ni core sheets sɛbɛnnenw ye ani baarakɛminɛn wɛrɛw. O jɔli bɛ lamini ni funteni ni degun kɔrɔsilen ye, ka nɛnɛ, ka a sɔgɔ ka kɛ karti dafalenw ye, ka sɔrɔ ka kodɔn ani ka kalan kɛ.

Ni i ye magɛnni sɛrɛkili don dakun na, o bɛ se ka dɔ bɔ sɛrɛkili-dacogo danfaralenw na, ka sɛrɛkili-yɔrɔ-ko bɛnkan ɲɛ ani ka karti caman dilanni nɔgɔya.

PVC, PC ani PET Materiel Sugandili

PVC Magnétique Bande Film

PVC bɛ kɛ ka caya plastiki karti kɔrɔlenw na bawo a bɛ se ka sɛbɛnni kɛcogo ɲuman di, ka fɛn caman sɛgɛsɛgɛ, ka lamini kɛcogo sabatilen di ani ka fɛn caman dilan min musaka ka dɔgɔ.

PVC magnetic stripe overlay bɛ sugandi ka caya lotɛli kilisi kartiw kama, kado kartiw, kantigiya kartiw, tɔndenw ka kartiw, don kartiw, baarakɛlaw ka badgew ani jago karti porogaramuw bɛɛ lajɛlen kama.

PC Polikarbonati Magnétique Bande Film

Polikarɔbɔnati bɛ sugandi kariti jɔcogo la minnu bɛ mago ɲɛ fɛnw na minnu bɛ se ka sɔgɔsɔgɔ kosɛbɛ, ka funteni sabati, ka u hakɛ sabati ani ka bɛn ni mɔgɔya kɛcogo kɛrɛnkɛrɛnnenw ye.

PC magnetic stripe overlay bɛ se ka jateminɛ kɛ ka ɲɛsin mɔgɔ tɔgɔla sɛbɛnw ma minnu bɛ mɛn, gɔfɛrɛnaman ka seereyaw, bolifɛntigiyasɛbɛnw, baarakɛlaw ka karti lakananenw ani karti hybridew. Laser personalisation bɛ PC grade bɛnnen ni karti dilancogo ɲuman de wajibiya.

PET Film min bɛ kɛ ni bande magnétique ye

PET bɛ girinya ɲuman di a ma, ka a hakɛ sabati ani ka a kɛlɛ ni ji ni kemikaliya kɛcogo kɔrɔ ye. A bɛ se ka kɛ jagokɛla ka kartiw la minnu bɛ mɛn ani kartiw jɔcogo jɛlenw na.

PET magnetic stripe film ka kan ka bɛn ni core sheets, coatings, inks ani lamination cogoyaw ye minnu bɛ bɛn ɲɔgɔn ma. Karti dafalen ka se ka segin a cogo kɔrɔ la, o bɛ bɔ fɛnw bɛɛ la, a datugulenw, a nɔrɔlenw, a puwɛntiw, anteniw ani sigida lasegincogo.

HiCo ani LoCo Magnetic Stripe Kalansenw

LoCo Bande Magnétique

LoCo kɔrɔ ye ko fanga dɔgɔyali. Porozɛ ɲɛfɔli min bɛ kɛ ɲɔgɔn fɛ, o bɛ se 300 Oe ma. LoCo sɛrɛkiliw bɛ magɛnni fanga dɔgɔya de wajibiya sɛbɛnni kama, wa a ka c’a la, u bɛ kɛ lotɛli kilisi kartiw kama, waati dɔɔnin don kartiw, ko kɛlenw kartiw, laseli kartiw ani seereyaw minnu bɛ sɛbɛn kokura tuma caman.

LoCo kunnafoniw bɛ se ka nɔ bila nɔgɔya la kɛnɛma magɛnni barikamaw fɛ, o la, karti sigida ni baarakɛwaati makɔnɔnen ka kan ka jateminɛ.

HiCo Bandi Magnétique (Banda Magnétique).

HiCo kɔrɔ ye fanga-dafalenba ye. Porozɛ suganditaw bɛ se ka kɛ 2750 Oe, 3000 Oe walima 4000 Oe ɲɔgɔn ye. HiCo sɛrɛkiliw bɛ se ka magɛnni bɔli kɛ kasaara la, wa a ka c’a la, u bɛ sugandi kartiw kama minnu bɛ minɛ tuma caman na walima minnu bɛ baara kɛ ka mɛn.

Sɛbɛnw bɛ se ka kɛ baarakɛlaw ka kartiw, bolifɛnw kartiw, dondaw kartiw, tɔndenw ka kartiw, wariko kartiw ani mɔgɔya kartiw ye.

Cɛmancɛ ni magɛnni hakɛ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Fɛn kɛrɛnkɛrɛnnenw i n’a fɔ 600 Oe walima 650 Oe bɛ se ka sɔrɔ baarakɛcogo kɛrɛnkɛrɛnnenw kama. O kalasi ninnu man kan ka sugandi jatebɔ nafa dɔrɔn fɛ; u ka kan ka bɛn ni encodeur, reader, reriting requirement ani karti sigicogo kɔrɔ ye.

Kalanso ɲuman sugandicogo

LoCo sugandi kartiw kama minnu bɛ sɛbɛn kokura tuma caman na walima minnu si ka surun, yɔrɔ minnu na sistɛmu dabɔra kodɔnni kama min tɛ fanga dɔgɔya. Aw bɛ HiCo sugandi ni a ka kan ka kɛ ni a kunbɛncogo ɲuman ye kasaara la ani a tali kuntaalajan na. Aw bɛ bɛnkan sɛgɛsɛgɛ tuma bɛɛ ni encodeur ni reader laɲininen ye.

Filimu minnu bɛ kɛ ni magɛnni ye, olu bɛ baara kɛ cogo min na

Magɛnni-fɛnw bɛ sɔrɔ o sɛrɛkili la minnu bɛ se ka ɲɛsin encodeur (kodɔn) ma min bɛ bɛn ɲɔgɔn ma. Kodeli waati la, masin bɛ magɛnni jiginniw sigiyɔrɔma dɔ Dabɔ min bɛ kɔrɔsi min bɛ Bɛn ni kunnafonidilanw ye minnu ka kan ka Kɛ nizɛrikan na.

Ni karti dafalen bɛ sɔgɔsɔgɔ walima ka don kalankɛlan dɔ kɔnɔ min bɛ se ka baara kɛ, kalan kunkolo bɛ magɛnni jiginniw kɔlɔsi, k’u sɛmɛntiya ka kɛ kunnafoniw ye minnu bɛ baara kɛ ni doncogo, jatigila, tɔndenw, tikiti walima wariko siratigɛ ye min bɛ bɛn o ma.

Magɛnni sɛrɛkili ye sɛbɛnnikɛminɛn ye sanni ka kɛ lakana sira dafalen ye. Lakanali bɛ bɔ kunnafonidilanw cogoya la, kɔkanna dantigɛli, kalanbagaw kɔlɔsili, seereyaw ɲɛnabɔli ani puwɛnti walima nɛgɛjuru kɛlɛli fɛɛrɛ wɛrɛw.

Filimu min bɛ kɛ ni filimu ye min bɛ wele ko Magnetic Stripe Overlay Film

Film Base Transparent ye

PVC, PC walima PET basigilen filimu bɛ lakana yɔrɔ jɛlen di ani ka datugulan ka masinko, ɲɛnayeli ani funteni kɛcogo caman dantigɛ.

Lamination Bonding Layer (Lamini ka bɔgɔdaga).

Bonding coating standard walima strong bonding coating bɛ kɛ karti-contact fan fɛ. O fini bɛ datugulan dɛmɛ a ka nɔrɔ sɛbɛnfura sɛbɛnnenw na minnu bɛ bɛn ɲɔgɔn ma funteni ni tansiyɔn lamini waati la.

Layer min bɛ sɛbɛnni kɛ ni magnɛti ye

Magɛnni-yɔrɔ la, fɛnɲɛnɛmaw bɛ yen minnu dabɔra LoCo walima HiCo sɛbɛnni kɛcogo sugandilen kama. A dabɔcogo, a bonya ani a kelen-kelen bɛɛ bɛ nɔ bila kodɔn ni kalanjɛ ɲɔgɔndan na.

Lakanali Bandi Surface

Sɛrɛkili min bɛ ye, o bɛ magɛnni lamini lakana ka bɔ a minɛcogo kɔrɔ la, wa a bɛ se ka dilan ni kulɛri nɛrɛma, bulama, nɛgɛ walima kulɛriw ye minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Layidu walima Transfer Layer

Stripe constructions dɔw bɛ baara kɛ ni transfert ni release layers ye u dilanni waati. A jɔcogo tigitigi bɛ bɔ ni fɛn dilannen bɛ dilan i n’a fɔ magnetic overlay, transfer stripe walima cogo wɛrɛ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Nafa jɔnjɔn minnu bɛ sɔrɔ karti dilannikɛlaw fɛ

Overlay ni Magnétique Function intégré

Magɛnni sɛrɛkili bɛ don lakanani dakun na, o bɛ dɔ bɔ sɛrɛkili-dacogo danfaralen na karti sɛbɛnni kɔfɛ.

Lamination Bonding barikama

Datugulan bɛnnen bɛ filimu dɛmɛ ka siri ni karti-kɔri sɛbɛnw ye minnu sɛbɛnnen don, wa a bɛ se ka dɔ bɔ nɔrɔli barikama na, dakun kɔrɔtalen, bugunw ani layɛrɛw farali la ni lamini kɛcogo ɲuman kɛra.

Stripe Position min bɛ kɛ cogo kelen na

O sɛrɛkili bɛ se ka dilan ka kɛɲɛ ni sɛbɛnfura-labɛn ja ye min dabɔra, ka dɛmɛ don ka segin-ka-bɔnye kɛ lamini ni karti punching kɔfɛ.

Surface Protection min sɛbɛnnen don

O dacogo jɛlen bɛ ja sɛbɛnnenw, fotow, sɛbɛnniw, barɔdiw, nimɔrɔw ani logow lakana ka bɔ sɔgɔsɔgɔninjɛ, nɔgɔ, ji ani segin-ka-bɔnye la.

Fɛn caman sugandili

PVC, PC ani PET suganditaw b’a to sannikɛlaw bɛ se ka dakunw bɛn ni karti kɔnɔna suguya wɛrɛw ye, baarakɛcogo-ɲɛnamaya wajibiyalenw, mɔgɔya kɛcogo ani fɛn dilanni taabolo.

OEM ka fɛn dilanni sɛgɛsɛgɛli

A bonya, a bonya, a janya, a bɛ se ka kɛ ni jiribolo ye, a bonya, a jɔyɔrɔ, a kulɛri, a sanfɛla, a dacogo, a foroko ani a sɛbɛncogo bɛ se ka kɛ ka kɛɲɛ ni karti porogaramu suguya wɛrɛw ye.

Magnetic Stripe Film Baarakɛcogo

Hotel Key Kartiw

LoCo walima sistɛmu kɛrɛnkɛrɛnnenw ka magɛnni sɛrɛkiliw bɛ se ka kɛ lotɛli kartiw kama minnu bɛ kodɔn ani ka bɔ kokura ka kɛɲɛ ni dunanw ka sigiyɔrɔw ye. Bɛnkan ka kan ka lajɛ ni lotɛli dakun encodeur ani reader ye.

Sɔrɔcogo kɔlɔsili ani Baarakɛlaw ka kartiw

HiCo magnetic stripe films bɛ se ka jateminɛ baarakɛlaw ka kartiw kan, yɔrɔ doncogo kartiw, kalanso kartiw, taamakɛlaw ka seereyaw ani bolifɛnw jɔyɔrɔ-don porogaramuw minnu ka kan ka baara kɛ ni u ye tuma caman.

Mɔgɔya ni kantigiya kartiw

Fiyeerekɛlaw, farikoloɲɛnajɛyɔrɔw, kuluw, gafemarayɔrɔw, ɲɛnajɛyɔrɔw ani baarakɛlaw bɛ se ka baara kɛ ni magɛnni kartiw ye walasa ka kiliyanw dɔn, ka jatew lajɛ ani ka tɔndenw ɲɛnabɔ.

Kadow ni fɛnw laseli kartiw

PVC magnetic stripe overlay bɛnnen don tuma caman na kado kartiw, laseli kartiw, ko kɛlenw kartiw ani jago porogaramuw la minnu bɛ sara ka kɔn, minnu bɛ musaka caman kɛ ka caya.

Bololabaara ni Bilɛti Kartiw

Karti magɛnni bɛ se ka bolifɛnw jɔyɔrɔw, bilɛtiw, bolifɛnw sarali ani bolifɛnw bolicogo dɛmɛ minnu bɛ taa a fɛ ka baara kɛ ni swipe-card infrastructures ye minnu bɛ bɛn ɲɔgɔn ma.

Banki ni Nafolo Kartiw

HiCo magnetic stripe fɛnw bɛ se ka jateminɛ wariko kartiw kama. Karti dafalenw ka kan ka dibaga ka fɛɛrɛ, lakana, seereyaw ani wari saracogo-porogaramu wajibiyalenw dafa.

Karti Magnɛtiki ni Smart Hybride

Magnetic stripe baarakɛcogo bɛ se ka fara ɲɔgɔn kan ni contact chips ye, RFID walima NFC inlays, barcodes, QR codes, signature panneaux ani lakanafɛnw sɛbɛnnenw. Karti jɔcogo dafalen ka kan ka sɛgɛsɛgɛ sani a ka dilan jamaba la.

Film magnétique stripe correcte sugandicogo

1. Aw ye Karti ɲinini sɛbɛn dafa

A ɲɛfɔ ni karti bɛna kɛ jatigila ye, dondaw kɔlɔsili, tɔndenw, bolifɛnw, banki, dantigɛli, kado-karti walima karti hakilitigi ɲɔgɔndan.

2. Aw bɛ PVC, PC walima PET sugandi

Aw bɛ fɛnw dabɔ ni karti kɔnɔna ye, sɛbɛnnikɛlan tintin, lamini minɛnw, mɔgɔ yɛrɛ tacogo, baarakɛwaati makɔnɔnen ani poroze baarakɛnafolo bɛn ɲɔgɔn ma.

3. Aw bɛ HiCo walima LoCo sugandi

Coercivity (wajibiya) min wajibiyalen don encodeur ni reader (kalanbaga) la min bɛ yen, o dafa. Aw kana a miiri ko Oe hakɛ min ka bon, o bɛ bɛn a yɛrɛma sigida bɛɛ ma.

4. Aw bɛ Stripe Width ni Tracks ɲɛfɔ

A fɔ ni karti bɛ sira kelen, fila walima saba de wajibiya, ani ka sɛrɛkili bonya wajibiyalen ni sira kodelen jɔyɔrɔ di.

5. Aw bɛ ja dɔ di min bɛ kɛ ni jiribolo-yɔrɔ ye

Ja ka kan ka karti dafalen hakɛw jira, a sɛrɛkili bonya, a ni karti da la janya, karti ɲɛsincogo, sɛbɛnfura labɛncogo, tigɛcogo ani jɔyɔrɔ muɲuni.

6. Aw bɛ Coating ni Ink dafa

Aw bɛ sɛbɛnni kɛcogo, enki suguya, furakɛli kɛcogo, sɛbɛnni datugucogo ani karti-kɔnɔfɛnw di walasa finimugu jɔnjɔn walima fini barikama ka se ka jateminɛ.

7. Kɔrɔbɔli misaliw

Filimu kɔrɔbɔ ni a kɔnɔna sɛbɛnnen yɛrɛ ye, laminatɛri, punching machine, encoder, reader ani finished-card sɔnni sariyaw sanni a ka dilan caman na.

Karti Lamini ni a dilanni taabolo

Aw ye sɛbɛnw labɛn minnu bɛ wele ko Printed Core Sheets

Aw bɛ karti-kɔnɔna sɛbɛnw bɔ ni enki, ja walima furakɛli fɛɛrɛ dagalen ye, ni tɔgɔsɛbɛnni taamasiyɛnw ani karti labɛncogo ye.

Aw ye Overlay Orientation lajɛ

Aw bɛ fan datugulen, magɛnni sɛrɛkili fan, sɛrɛkili sira, ɲɛfɛla walima kɔfɛla ɲɛsincogo ani karti labɛncogo dafa sani aw ka u dalajɛ.

Aw bɛ Karti Layɛrɛw dalajɛ

Aw bɛ ɲɛfɛla datugulan, sɛbɛnnikɛlan kɔnɔna layɛrɛw, kɔnɔna inlay walima puce layer, kɔfɛla sɛbɛnnen ani kɔfɛ magnetic overlay dalajɛ ka kɛɲɛ ni ɲɔgɔn ye min dagalen don.

Laminate (Lamina) bɛ kɛ cogo la min dagalen don

Aw bɛ baara kɛ ni funteni, tansiyɔn, funteni waati, nɛnɛ waati, bɔli platiw ani stacking fɛɛrɛ bɛnnen ye min sigilen don misali sɛgɛsɛgɛli waati. Fɛn suguya wɛrɛw bɛ baarakɛcogo finɛtiri suguya wɛrɛw de wajibiya.

Aw bɛ sɛbɛnw nɛnɛ ani ka u cogoya

Nɛnɛ min bɛ kɔrɔsi, o bɛ dɛmɛ ka lamini sigicogo sabati ani ka dɔ bɔ warping, bubbles, deformation ani uneven bonding.

Punch ka Kartiw

Aw bɛ sɛbɛnfura lamininen sɔgɔ ka kɛ karti dafalenw ye ka a bonya, a bonya, a sɛrɛkili jɔyɔrɔ, a dakunw sirili, a flakɛ ani a ɲɛda cogoya lajɛ.

Encode ani Verifier (Sɛgɛsɛgɛli).

Magɛnni sira wajibiyalenw kodɔn ni fɛn dilanni encodeur ye, o kɔfɛ, aw bɛ kunnafoniw tiɲɛni sɛgɛsɛgɛ, ka swipe sira, taamasiyɛnw cogoya ani kalanbagaw ka bɛnkan sɛgɛsɛgɛ.

Jogoɲumanya kɔlɔsili ni a sɛgɛsɛgɛli

Filimu ni finiw sɛgɛsɛgɛli

• Fɛnɲɛnɛma ni coating-grade sɛgɛsɛgɛli.

• Sɛgɛsɛgɛli min bɛ kɛ a janya ni a bonya ni a bonya kan.

• Transparence, haze, gloss ani surface-finish sɛgɛsɛgɛli.

• Bugun, sɔgɔsɔgɔninjɛ, kurukuru, pinɛ ani nɔgɔ sɛgɛsɛgɛli.

• Coating uniformité ani coated-side identification.

• Kɔrɔbɔli lamination, flatness ani bonding jateminɛ.

Sɛgɛsɛgɛli min bɛ kɛ ni bandi magnétique ye

• HiCo walima LoCo ka kalasi dafalen.

• Sɛrɛkili bonya, a sigiyɔrɔ, a sira ani a dakun-jogo sɛgɛsɛgɛli.

• Surface tɛmɛsira, kulɛri ani ɲɛnayeli-dɛsɛ sɛgɛsɛgɛli.

• Stripe adhesion ani a ka se ka baarakɛcogo tiɲɛni kɛlɛ.

• Encoder sɛbɛnni ni kalanden sɛgɛsɛgɛli.

• Track configuration ani data-tiɲɛni sɛgɛsɛgɛli.

Finished-Karti Kɔrɔbɔli

• Finished-card hakɛw ni a bonya.

• Stripe jɔyɔrɔ ka kɛɲɛ ni karti da la.

• Surface (yɔrɔ) cogoya ani sɛbɛnni yecogo.

• Layɛrɛ nɔrɔli, dakun sirili ani delamination.

• Flatness, bending ani baarakɛcogo kɔrɔlen.

• Kodeli, kalan, swipe sira ani sistɛmu bɛnkan.

Sariyaw ni Karamɔgɔ ka bɛnkan

Magɛnni karti porozɛ minnu tɛ fanga dɔgɔya ani minnu fanga ka bon, olu bɛ se ka labɛn ani ka kɔrɔbɔ ka kɛɲɛ ni ISO/IEC 7811 yɔrɔw ye minnu bɛ tali kɛ o ko la, diɲɛ jamanaw ka ɲɔgɔnfaamu walima sariya labatoli sariyalen bɛ yɔrɔ minnu na.

Raw magnetic stripe film supply tɛ karti dafalen sariya labatoli sigi sen kan a yɛrɛma. Labatoli bɛ bɔ karti laban hakɛw la, sɛrɛkiliw sigiyɔrɔ, magɛnni cogoyaw, kodɔnni, jɔli, mɔgɔya ani karti sɛgɛsɛgɛli dafalen.

Sannikɛlaw ka kan ka encodeur, reader, track format, coercivity ani standard applicaption laɲininen di sani u ka production material komandi.

Foroko, mara ani diɲɛ kɔnɔ fɛnw cicogo

Filimu minnu bɛ kɛ ni magɛnni ye, olu ka kan ka lakana ka bɔ buguri, ji, sɔgɔsɔgɔninjɛ, kuruli, degun kojugu, funteni min tɛ se ka kunbɛn, tile yeelen tilennen ani magɛnni fanga barikamaw ma u marali ni u ta waati.

• PE filimu min bɛ mɔgɔ tanga walima kɔnɔna sirilan saniyalen.

• Kraft papier walima bɔrɔ datugulenw minnu tɛ ji bɔ.

• Kartɔn fla, kɛsu barikamaw, jirisunw walima palɛtiw.

• Nkɔni, dakun ani sanfɛla lakanani.

• Horizontal marali walasa ka dɔ bɔ deformation (dɔgɔyali) la.

• Fɛn min bɛ kɛ, a bonya, a jagoya, a sɛrɛkili siratigɛ ani a batch labels.

• Shipping marks customized, packing lists ani OEM taamasiyɛnw.

Mun na i bɛ Wallis sugandi ka kɛ i ka filimu dilanbaga ye min bɛ wele ko Magnetic Stripe Film?

Wallis bɛ kartiw di karti dilannikɛlaw ma, karti hakilitigiw ka iziniw ma, lakana sɛbɛnnikɛlaw ma, fɛn caman tigɛlikɛlaw ma, mɔgɔya dilanko tɔnw ma, karti feerelaw ma ani OEM kiliyanw ma diɲɛ fan bɛɛ.

• PVC, PC, PET ani o ɲɔgɔnna karti-fɛnw suganditaw.

• HiCo, LoCo ani magnetic grades minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Ladamuni janya, sɛbɛnfura hakɛ, sɛrɛkili bonya ani sɛrɛkili jɔyɔrɔ.

• Standard, strong-coated, laserable ani magnetic overlay sugandiliw.

• Misali dɛmɛni lamination, encoding ani kalanjɛ sɛgɛsɛgɛliw kama.

• OEM pakew, labeling ani batch traceability.

• Overlay, core sheet, RFID inlay ani karti fɛnw minnu bɛ tali kɛ o la, olu bɛ dilan yɔrɔ kelen na.

Ɲininkali minnu bɛ kɛ tuma caman na

Filimu min bɛ kɛ ni magɛnni ye, o bɛ kɛ mun na?

Filimu min bɛ kɛ ni magɛnni ye, o bɛ kunnafonidilan dɔ di min bɛ se ka kalan masin fɛ plastiki kartiw kan. Ni a donna fɛn dɔ kɔnɔ min datugulen don, a bɛ karti sɛbɛnnen ɲɛda fana lakana lamini waati la ani a kɔfɛ.

Danfara jumɛn bɛ PVC, PC ani PET magɛnni filimuw ni ɲɔgɔn cɛ?

PVC bɛ sugandi ka caya karti caman na minnu musaka ka dɔgɔ. PC bɛ kɛ ka ɲɛsin porozɛw ma minnu bɛ se ka muɲu kosɛbɛ ani minnu bɛ kɛ ka ɲɛsin mɔgɔ yɛrɛ ka baarakɛcogo kɛrɛnkɛrɛnnenw ma. PET bɛ fanga ɲuman ni hakɛ sabatili di jago walima kartiw jɔcogo jɛlenw ma minnu bɛ mɛn.

Fɛn jumɛn de bɛ mɛn ka tɛmɛ fɛn tɔw bɛɛ kan?

A ka c’a la, polikarbonati bɛ sugandi karti jɔli kama minnu bɛ mago ɲɛ kosɛbɛ fɛnw na minnu bɛ se ka fɛnw tiɲɛ ani minnu bɛ baara kɛ waati jan. Muɲuli laban bɛ bɔ hali bi fɛnw hakɛ la, karti jɔcogo la, a dacogo la, a laminicogo la ani a ka karti sɛgɛsɛgɛli dafalen na.

Danfara jumɛn bɛ HiCo ni LoCo cɛ?

LoCo sɛrɛkiliw bɛ magɛnni fanga dɔgɔya de wajibiya sɛbɛnni kama wa u ka teli ka kɛ kartiw ye minnu bɛ sɛbɛn kokura tuma caman na walima minnu si ka surun. HiCo sɛrɛkiliw bɛ kodɔn barikama de wajibiya ani u bɛ se ka u yɛrɛ tanga kosɛbɛ magɛnni bɔli ma kasaara la.

Yala Oe 300, Oe 600, Oe 2750 ani Oe 3000 bɛ sɔrɔ wa?

O jatedenw bɛ se ka jateminɛ ka kɛɲɛ ni poroze ka wajibiw ye. Sɔrɔli bɛ bɔ fɛnw na, sɛrɛkili bonya, kulɛri, sɔrɔcogo, hakɛ, encodeur ani kalanbaga ka bɛnkan.

Magɛnni sɛrɛkiliw bonya jumɛnw bɛ sɔrɔ?

A ka ca a la, a bonya ye 6,35mm, 8,4mm ani 12,7mm ye. Bonya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka jateminɛ ka kɛɲɛ ni siraw labɛncogo ye, karti dilanni ani u dilanni wajibiyalenw.

Yala sɛrɛkili jɔyɔrɔ bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Aw bɛ ja dɔ di min bɛ karti dafalen hakɛw jira, sɛrɛkili bonya, sɛrɛkili sira, yɔrɔjan ka bɔ karti da la, sɛbɛnfura labɛncogo, tigɛ taamasiɲɛw ani muɲuli.

Yala filimu bɛ se ka dilan sɛbɛnw ni sɛbɛnfuraw kɔnɔ wa?

Baro bɛ se ka kɛ sɛbɛnfura, slit-film ani roll cogoyaw kan. A laban sɔrɔli bɛ bɔ fɛn dilannenw na, u bonya, u dacogo, u sɛrɛkiliw jɔcogo, u minɛnw ani u komandi hakɛ.

Yala magnetic stripe film bɛ se ka fara ɲɔgɔn kan ni RFID walima contact puces ye wa?

Awɔ. Karti hybride bɛ se ka kɛ ni magnetic stripe ye ka fara contact puce kan, RFID walima NFC inlay, barcode, QR code walima signature panel. A jɔli dafalen ka kan ka kɔrɔbɔ sani a ka kɛ jamaba ye.

Yala o filimu bɛ bɛn karti kalanbaga bɛɛ ma wa?

Bɛnkan tɛ se ka dafa ni kalanden bɛɛ ye. Coercivity, stripe width, track location, encoding format, signal quality, card construction, encoder ani reader ka kan ka bɛn ɲɔgɔn ma ani ka kɔrɔbɔ.

Yala magnɛti sɛrɛkili kulɛri bɛ se ka kɛ ka kɛɲɛ ni i yɛrɛ sago ye wa?

Dugukolonɔn ni bulama ye sugandiliw ye minnu ka teli ka kɛ. Sanu, warijɛ, bulu, bilen ani kulɛri wɛrɛw bɛ se ka sɔrɔ ka kɛɲɛ ni magɛnni hakɛ ye, farikolo ta fan fɛ misali sɔnni, komandi hakɛ fitinin ani u dilanni seko.

Yala magnɛti sɛrɛkili bɛ karti lakanani di a yɛrɛ ma wa?

Ayi, magnɛti sɛrɛkili ye kunnafoniw sɛbɛncogo ye. Karti lakanani bɛ bɔ kunnafoni kodɔnlenw na, kɔkanna dantigɛli, kalanbagaw kɔlɔsili, seereyaw ɲɛnabɔli ani puce walima lakana fɛɛrɛ wɛrɛw.

Yala misaliw bɛ se ka sɛgɛsɛgɛ sani u ka kɛ caman ye wa?

Awɔ. Misaliw ka kan ka sɛgɛsɛgɛ ni sɛbɛnni bɛ bɛn ɲɔgɔn ma, ni lamini sirili bɛ ɲɔgɔn na, ni u bɛ sɛrɛkiliw jɔ, ni u bɛ punch tiɲɛni kɛ, ni u bɛ kodɔn, ni u bɛ kalan, ni u bɛ karti flakɛ ani u bɛ se ka kɛ karti dafalen ye.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw ye fɛn dilannenw, u janya, u sɛbɛnfura walima u wulicogo, HiCo walima LoCo hakɛ, u ka jagokɛcogo, u ka sɛrɛkiliw bonya, u jɔyɔrɔ ja, u kulɛri, u dacogo, u ka karti kɛcogo, u ka kodɔn, u kalanbaga, u hakɛ, u foroko ani u taayɔrɔ di.