Laada LF / HF / UHF Kɔrɔlen PVC RFID Inlay prelam Sɛbɛn

Laadalata Labɛn LF , HF ani UHF jɛlen PVC RFID Inlay prelam Sɛbɛn

Wallis transparent PVC RFID inlay prelam sheets dilannen don ka ɲɛsin smart card dilannikɛlaw ma minnu tɛ se ka ɲɔgɔn sɔrɔ, minnu bɛ antɛni labɛncogo caman wajibiya, puwɛnti sigicogo kɔrɔsilen ani lamination baarakɛcogo dafalen. Porozɛ labɛncogo minnu bɛ sɔrɔ, olu ye LF 125kHz, HF 13.56MHz, NFC ani UHF 860–960MHz fɛɛrɛw ye minnu bɛ kɛ ka don kartiw, dantigɛlisɛbɛnw, tɔndenw ka kartiw, lotɛli kartiw, nafolo kartiw ani RFID baarakɛminɛn wɛrɛw.

Prelam sɛbɛn kelen-kelen bɛɛ bɛ RFID puce ni antenne sugandilenw fara ɲɔgɔn kan PVC layɛrɛ jɛlenw kɔnɔ walima minnu bɛ kɛnɛya tilancɛ la sanni karti laban ka tigɛli kɛ. Layidu, sɛbɛnfura hakɛ, a janya, antɛni jateminɛcogo, puce jɔyɔrɔ ani karti fɔcogo bɛ se ka labɛn sannikɛla ka punching baarakɛminɛn lamini na, sɛbɛnnikɛlan ka seko ni dɔnko baara, laminatɛri ani kalanbaga sitɛmu.

LF , HF ani UHF ye arajo fɛɛrɛw ye minnu tɛ kelen ye sanni ka kɛ fɛn kelen bɔcogo ye minnu bɛ se ka ɲɔgɔn falen. Walasa ka quotation dannamɔgɔ sɔrɔ, sannikɛlaw ka kan ka frequency wajibiyalenw dɔn, protocole, chip model, reader model, target read range ani karti jɔli dafalen sani sample production ka kɛ.

Fɛɛrɛko ɲɛfɔli

RFID Inlay prelam sɛbɛn ɲɛnama ye mun ye?

RFID prelam ye cɛmancɛ-yɔrɔ baarakɛta ye min bɛ kɛ ka karti plastiki dilan min tɛ ɲɔgɔn sɔrɔ. Puce, antenne ani bonding structure bɛ datugu plastiki layɛrɛw ni ɲɔgɔn cɛ, ka sɛbɛn sabatilen dɔ dilan min bɛ se ka fara ɲɔgɔn kan ni sɛbɛnfura sɛbɛnnenw ye ani lakanani Film overlay s sanni ka punch laban kɛ.

Kartiw sigicogo min bɛ kɛ cogoya la

• Sanfɛ lakanani Film overlay walima layɛrɛ min bɛ se ka sɛbɛn

• PVC prelam layɛrɛ jɛlen

• RFID puce ani antɛni min bɛ bɛn ɲɔgɔn ma

• Jiginni PVC layɛrɛ ani sɛbɛnfura sɛbɛnnen min bɛ se ka kɛ

• Back Film overlay walima baarakɛcogo karti layɛrɛ

Transparent PVC bɛ a to antɛni ni kɔnɔna jɔli ka kɛ karti yelen dilancogo dɔ ye. Ikomi antɛni bɛ to ka ye, a labɛncogo, a nɔrɔcogo, a yɔrɔ saniyacogo ani a puwɛnti jɔyɔrɔ nafa ka bon kɛrɛnkɛrɛnnenya la karti jɛlenw na minnu ka bon kosɛbɛ.

LF , HF walima UHF Teknoloji ɲuman sugandi

Frequency sugandili ka kan ka da kalanbagaw ka infrastructure ani application protocole kan. Karti min dabɔra LF dondaw kɔlɔsili kama, o tɛna baara kɛ a yɛrɛma ni HF / NFC kalanbaga ye, wa UHF tuguni karti bɛ antɛni ni kɔrɔbɔli sigida wɛrɛ de wajibiya ka bɔ karti surun na.

Custom Layout Engineering ka ɲɛsin Kartiw dilanni ma

Sannikɛla ka punch ni sɛbɛnni kɛcogo bɛn

Inlay matrix ka kan ka bɛn kiliyan ka seko ni dɔnko walew bilali ma, a tɔgɔ sɛbɛnni taamasiyɛnw, punching die ani karti ɲɛsincogo. Labɛn minnu bɛ kɛ ka kɛɲɛ ni sariya ye i n’a fɔ 3×8, 3×7 ani 4×5, olu bɛ se ka dilan, k’a sɔrɔ labɛncogo ladamulenw bɛ ja dimensionnel walima karti-yɔrɔ file min dabɔra, o de wajibiya.

Puce ni Antenna jɔyɔrɔ kɔrɔsi

Puce jɔyɔrɔ ka kan ka a yɛrɛ tanga embossing zones ma, magnétique stripes, signature panneaux, contact modules, punch lines ani critique imprimé elements. Walasa ka dilancogo jɛlenw kɛ, antɛni sira yelen fana ka kan ka lajɛ ka kɛɲɛ ni seko ni dɔnko baara ye.

Design for Finished Karti janya

prelam janya ye karti jɔli dafalen yɔrɔ kelen dɔrɔn ye. Sɛbɛn sɛbɛnnenw, Film overlay s, nɔrɔlenw, puwɛntiw ani lakana layɛrɛw minnu bɛ se ka sugandi, olu ka kan ka don a kɔnɔ ni lamini laban janya jatebɔ bɛ kɛ.

Nafa jɔnjɔn minnu bɛ sɔrɔ fɛn dilanni na

Precise Inlay Jiginni

Antɛni ni puwɛnti bilali kɔrɔsilen bɛ kiliyan dɛmɛ ka a tɔgɔ sɛbɛnni mara ni sɛbɛnni, lamini ani punch ye. Dimension wajibiyalenw ka kan ka ɲɛfɔ layidu ja dabɔlen kan ani ka sɛgɛsɛgɛli kɛ misali dilanni senfɛ.

Karti dilancogo jɛlen seko

Prelam transparent walima semi transparent bɛ se ka kɛ sababu ye ka karti dilancogo yelenw kɛ ni fɛɛrɛ ye. PVC layɛrɛw saniya, nɔrɔlen cogoya min bɛ kɔrɔsi ani antɛni siratigɛ basigilen bɛ dɛmɛ ka karti dafalen dilan min ka bon kosɛbɛ.

Lamination ni Conversion (Lamini ni fɛn caman tigɛli) bɛnkan

Prelam bɛ se ka don ɲɔgɔn na ni PVC sɛbɛnni sɛbɛnw ye minnu bɛ bɛn ɲɔgɔn ma ani Film overlay s. Lamini funteni, tansiyɔn, sigi waati ani nɛnɛ kɛcogo ka kan ka dafa kɔrɔbɔliw fɛ bawo sigicogo ɲumanw bɛ bɔ karti jɔli ni minɛnw na.

Porozɛ dɛmɛni min bɛ kɛ ni fɛn caman ye ani min bɛ kɛ ni ɲɔgɔn ye

Fɛnɲɛnɛma kelen-kelen ni ɲɔgɔndan sugandilenw bɛ se ka labɛn. Karti hybride bɛ ɛntɛrinɛti wɛrɛw de wajibiya bawo antɛni fila bɛ se ka ɲɔgɔn sɔrɔ, ka ɲɔgɔn sɔrɔ karti yɔrɔ la walima ka nɔ bila kalan kɛcogo la lamination kɔfɛ.

OEM Sɛnɛfɛnw dilanni kunnafoniw

Sannikɛlaw bɛ se ka sɛbɛnw tɔgɔw fɔ, karti-yɔrɔ nimɔrɔw, tɔgɔsɛbɛnni taamasiyɛn nɛrɛmaw, pakew hakɛw ani palɛti sɛbɛnw. Encoding walima UID data handling ka kan ka ɲɛfɔ danfara la, data cogoya, lakana wajibiyalenw ani keys kunkanbaaraw sen bɛ o la.

Sɛbɛnni, Lamini ani Karti caman tigɛli ɲɛminɛni

Printing Surface ka kan ka dafa

Prelam sɛbɛn dɔw dabɔra ka to karti kɔnɔ ani ka datugu ni PVC sɛbɛnw ye minnu sɛbɛnnen don u dan na. Direct offset, UV walima digital printing ka kan ka fɔ dɔrɔn ni surface treatment ni ink system sugandilen sɛgɛsɛgɛra walasa ka a nɔrɔ.

RF baarakɛcogo ka kan ka sɛgɛsɛgɛ Lamination kɔfɛ

Antɛni rezɔn ni kalan hakɛ bɛ se ka Changé prelam kɛlen kɔ ka fara ɲɔgɔn kan ni Film overlay s ye, nɛgɛ enkiw, papiye, magɛnni fɛnw walima ɛntɛrinɛti yɔrɔw minnu bɛ a kɛrɛfɛ. Sɔn sɛgɛsɛgɛli ka kan ka baara kɛ ni karti laban jɔli ye ani sannikɛla ka fɛn dilanni kalanbaga.

Punching Registration ka kan ka sɛgɛsɛgɛ

Sani a ka kɛ jamaba ye, kiliyan ka kan ka seko ni dɔnko baara sɛbɛnni, karti fɔcogo, antɛni bɔli ani puwɛnti yɔrɔ sɛgɛsɛgɛ punching baarakɛminɛn yɛrɛ kan. Ja min bɛ kɛ ni jatebɔ ye, o dɔrɔn tɛ se ka kɛ fɛn dilanni kɔrɔbɔli dafalen nɔ na.

Jogoɲumanya kɔlɔsili ani misali sɔnni

B2B komandiw ta fan fɛ, misali min dabɔra, o ka kan ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ ka ɲɛsin a labɛncogo, a cogoya, a bonya ani RF baarakɛcogo ma. Sɛgɛsɛgɛli sariyaw ka kan ka bɛn sani u ka dilan, kɛrɛnkɛrɛnnenya la, antɛni dilanni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani minnu bɛ kɛ ni fɛn caman ye.

Sanu misali taabolo ladilikan

1. Frequency, protocole, puce, reader ani encoding wajibiyalenw dafa.

2. Aw bɛ sɔn sɛbɛnfura ja, karti matirili, antɛni sira ani puce coordinates ma.

3. Aw bɛ prelam sɛbɛnw misali dilan ani ka kuran baarakɛcogo sɛgɛsɛgɛ.

4. Lamina ni sannikɛla ka karti jɔcogo dafalen ye.

5. Karti dafalenw punch ani k’u kɔrɔbɔ kalanbagaw ka sigida laɲininen kan.

6. Aw bɛ sɔn Sanu Sample ni batch sɔnni sariyaw ma minnu sɛbɛnnen don.

Aplikasi minnu bɛ kɛ

Sɔrɔcogo kɔlɔsili ani jamalajɛ kartiw

LF walima HF prelam sɛbɛnw bɛ se ka labɛn baarakɛlaw ka se sɔrɔli kama, kalanso dɔnni, nali ani gɛrɛɲɔgɔnna ciyɛn siratigɛ la. Kalanbaga ka protocol sigilen ka kan ka dafa sani puce sugandili ka kɛ.

NFC ani Mɔgɔw ​​ka Kartiw

HF / NFC inlays bɛ se ka dɛmɛ don nizɛri jɛɲɔgɔnya la, tɔndenw dɔnni ani jagokɛcogo hakilitigi sugandilenw ni puce hakilijagabɔ, NDEF wajibiyalen ani smartfon walima kalanbaga bɛnkan ɲɛfɔra.

Lotɛli ni jatigila kartiw

Lotɛli ka kartiw ka kan ka bɛn lock system kɔrɔlen ka frequency, chip, memory structure ani lakana cogoya ma. HF walima NFC puce jɛrɛn tɛ se ka kɛ a yɛrɛma ni lotɛli dakun bɛɛ ye.

UHF Identifikasiyɔn ni tugu-tugu-kartiw

UHF karti inlays bɛ se ka dilan ka ɲɛsin yɔrɔjan dɔnni ma, mobili sɔrɔli ani nafolo baarakɛcogo. Baara kɛcogo bɛ bɔ marabolow ka frequency band la, kalanbaga fanga, antɛni ɲɛsincogo ani fɛnw minnu bɛ karti dafalen lamini.

Mun na Wallis bɛ sugandi ka ɲɛsin RFID prelam sɛbɛnw ma?

• Layidu dɛmɛni min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye : karti matiriyali, antɛni sira, puce jɔyɔrɔ ani sɛbɛn hakɛ bɛ se ka lajɛ OEM porozɛw kama.

• RFID fɛɛrɛ caman : LF , HF / NFC , UHF ani ɲɔgɔndan sugandilenw bɛ se ka baro kɛ.

• Karti minɛnw seko jɛlen : PVC jɔli jɛlenw ni jɛlen tilalenw bɛ sɔrɔ fɛɛrɛ yelenw dilanni kama.

• Karti fɛnw jɛ-ka-baara : PVC sɛbɛnw, Film overlay s ani karti jiginni dɛmɛ dafalen bɛnni bɛ se ka kɛ ɲɔgɔn fɛ.

• Sɔn min sinsinnen bɛ misali kan : fɛɛrɛbɔ misaliw bɛ se ka jateminɛ walasa ka lamini, punch ani kalanbagaw ka bɛn ɲɔgɔn ma sani u ka kɛ jamana kɔnɔ.

• Jagokɛlaw ka foroko : sɛbɛnw lakanani, kartɔn pakew, taamasiyɛnw ani palɛti suganditaw bɛ se ka ɲɛfɔ diɲɛ jamanaw ka komandiw kama.

Sugandili minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• LF , HF / NFC , UHF walima fɛnɲɛnamafagalanw ka fɛnɲɛnamafagalanw sigicogo min dagalen don

• Puce model sugandilen sannikɛla ka protocole ni kalanden ka

• Kupu nɛgɛ, nɛgɛ min bɛ don a kɔnɔ walima antenne etched dilancogo

• 3×8, 3×7, 4×5 walima sɛbɛnw labɛncogo dafalen

• Ladamu sɛbɛn hakɛw, a bonya ani a karti fɔcogo

• Yeecogo jɛlen, tilancɛ jɛlen walima frosted transparent yecogo

• Sɛbɛnni taamasiyɛnw, karti-yɔrɔ nimɔrɔw ani OEM taamasiyɛnw

• Sheet, carton ani export pallet pakew

Foroko ni Dugukolo kan fɛnw cicogo

RFID prelam sɛbɛnw ka kan ka lakana ka bɔ kuruli la, ka nɔgɔ, ka bɔ ji la ani ka masinw ka degun sɔrɔ u tali waati. Pake hakɛ, danfaralanw, anti-static wajibiyalenw, kartɔn taamasiyɛnw ani palɛti cogoya bɛ se ka dafa ka kɛɲɛ ni sɛbɛn hakɛ ye ani sannikɛla ka sɔrɔcogo ye.

Kunnafoni minnu ka kan ka kɛ walasa ka B2B Quotation teliya

Ɲininkali minnu bɛ kɛ tuma caman na

RFID inlay prelam sɛbɛn bɛ kɛ mun na?

O ye karti plastiki min tɛ ɲɔgɔn sɔrɔ, o cɛmancɛ-yɔrɔ baarakɛta ye. Puce ni antenne bɛ sɛbɛn in kɔnɔ, wa a bɛ lamini ni sɛbɛnnikɛlan sɛbɛnw ni Film overlay s ye ka sɔrɔ ka punch kɛ karti dafalenw na.

RFID frequences jumɛnw bɛ se ka di?

Porozɛ suganditaw ye LF 125kHz, HF 13,56MHz, NFC ani UHF 860–960MHz ye. Dual-frequency walima hybrid structures sugandilenw fana bɛ se ka jateminɛ.

Yala LF , HF ani UHF puwɛntiw bɛ se ka bila ɲɔgɔn nɔ na wa?

Ayi, u bɛ baara Kɛ ni frequence, protocole, antenne ani reader systems (fɔkanw) suguya wɛrɛw ye. Puce ni antenna ka kan ka sugandi ka kɛɲɛ ni infrastructure laɲininen ye.

Yala sɛbɛnfura labɛncogo ni a puce jɔyɔrɔ bɛ se ka kɛ ka kɛɲɛ ni i yɛrɛ sago ye wa?

Awɔ. Layidu, sɛbɛnfura hakɛ, karti fɔcogo, antɛni jateminɛcogo ani puce coordinates bɛ se ka labɛn ka bɔ ja hakɛlama dɔ la ani ka bɔ ja dilancogo misali la min dagalen don.

Yala prelam transparent bɛ se ka sɛbɛn directement wa?

A bɛ bɔ surface grade sugandilen na ani ink system. Karti jɔcogo caman bɛ baara kɛ ni PVC sɛbɛnw ye minnu sɛbɛnnen don u dan na prelam kan. Sɛbɛnni tilennen ka kan ka dafa ni enki nɔrɔli sɛgɛsɛgɛli ye.

A janya jumɛn bɛ sɔrɔ?

Sisan fura kunnafoniw bɛ 0,30–0,76mm jira. Prelam janya ɲuman bɛ bɔ puce cavity, antenne, Film overlay s ani karti dafalen janya wajibiyalen na.

Yala aw bɛ se ka RFID prelam kɛ min bɛ kɛ ni frequency fila ye wa?

LF + HF , LF + UHF walima HF + UHF sigicogo sugandilenw bɛ se ka lajɛ. A kɛcogo bɛ bɔ antɛni jɛɲɔgɔnya la, karti yɔrɔ sɔrɔlen, puce jɔyɔrɔw ani karti laɲinilen janya.

RF baarakɛcogo bɛ sɛgɛsɛgɛ cogo di?

Kɔrɔbɔli bɛ se ka kɛ antɛni tɛmɛsira ye, puce jaabi ani porozɛ kɛrɛnkɛrɛnnen kalanbagaw sɛgɛsɛgɛli. Sɔn laban fana ka kan ka karti punchedw kɔrɔbɔ lamination kɔfɛ ni sannikɛla ka kalankɛminɛn ye.

Yala UHF kalanni yɔrɔjanw bɛ garanti wa?

Kalan yɔrɔjan bɛ bɔ puwɛnti sɛgɛsɛgɛli la, antɛni dilanni, marabolo bandi, kalanbaga fanga, a ɲɛsincogo ani a laminifɛnw. Laɲini yɔrɔ dɔ ka kan ka tiɲɛ ni karti laban jɔli ye.

Yala o fɛnw bɛ se ka kɛ lotɛli ka kilisi kartiw ye wa?

Ɔwɔ, ni puce ni protocole bɛ bɛn lotɛli lock system ma. Lock brand, encoder ani karti specification min bɛ yen, olu ka kan ka di walasa ka bɛnkan lajɛ.

Yala puwɛntiw bɛ se ka kodɔn sani u ka ci wa?

Kodeli bɛ Se ka Fɔ ka Kɛɲɛ ni puce (puce) ni porozɛ ye. Kunnafonidila ka kan ka kunnafonidilanw cogoya, kilisi, UID minɛcogo, dakun datugucogo ani lakana kunkankow ɲɛfɔ.

Mun ka kan ka sɛgɛsɛgɛ sani ka komandi kɛ ka caya?

Sannikɛlaw ka kan ka sɛbɛnfura hakɛw, sɛbɛnni walima Film overlay bɛnkan, lamini, punch sɛbɛnni, karti flakɛli ani RF baarakɛcogo kɔrɔbɔ kalanbaga laɲininen kan. Sanuman min dabɔra, o ka kan ka kɛ batch reference ye.