|
Inlay/ Prelam ye
Wallis ye baara kɛ
| Bonya: | |
|---|---|
| Puce: | |
| Hakɛ: . | |
Wallis dual-frequency RFID TK4100 + F08 inlay prelam sheet ye baarakɛminɛn ye min bɛ se ka kɛ fɛn ye min bɛ se ka kɛ fɛn dilannikɛlaw ye minnu bɛ se ka don ɲɔgɔndan, baarakɛlaw ka ID, kalanso, tɔndenw, lotɛli ani sitɛmu caman ka kartiw dilan. A bɛ yɛrɛmahɔrɔnyalen ni LF 125kHz TK4100 seere yɛrɛmahɔrɔnyalen fara ɲɔgɔn kan HF 13.56MHz F08 seere karti labɛncogo kelen kɔnɔ, o b’a to karti dafalen bɛ se ka jɛɲɔgɔnya kɛ ni kalanbagaw ka fɛnsɔrɔsiraw fila ye minnu bɛ bɛn ɲɔgɔn ma.
LF ni HF sɛrɛkiliw bɛ to danfara la : frequency kelen-kelen bɛɛ n’a ka puce, antenne walima coil don, protocole kɛcogo ani kalanden ka bɛnkan. Walasa ka fɛn caman dilan ka da a kan, puwɛntiw ɲɛfɔli, kalanbaga modɛliw, antɛni jɔyɔrɔ, sɛbɛnfura labɛncogo, karti jɔcogo dafalen ani laɲini kalan kɛcogo ka kan ka dafa ka sɔrɔ ka baarakɛminɛnw ni caman lamini.
| Paramɛtiriw | ɲɛfɔli ɲɛfɔli ani B2B dantigɛli yɔrɔ |
|---|---|
| Fɛn dilannen suguya | Dual-frequency RFID inlay prelam sheet walasa ka kɔfɛla lamination, sɛbɛnni, punching ani karti personalisation. |
| Combination standard (Fɛɛrɛbɔcogo) min bɛ wele ko Standard | LF 125kHz TK4100 + HF 13,56MHz F08. Bamako, Mali. Aw bɛ puwɛnti dilabaga tigitigi, hakilijagabɔcogo, UID cogoya ani kalanbaga/sistɛmu wajibiyalenw dafa sanni ɲɛfɔli sɛbɛn kan. |
| Layidu minnu bɛ sɔrɔ | 2×5 (A4), 3×7, 3×8 ani sɛbɛnw matiriyali wɛrɛw minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Sɛbɛn laban hakɛw, karti fɔcogo, dakunw, tɔgɔsɛbɛnni taamasiyɛnw ani punch ɲɛminɛcogo ka kan ka tugu ja la min dagalen don. |
| Reference Prelam ka bonya | 0,55–0,60mm ɲɔgɔn bɛ LF + HF jɔcogo la sisan. Tiɲɛ na, a janya ni a muɲuni bɛ bɔ puce pake la, antenne jɔli la, substrat ani karti laban stack la. |
| Basi Materiel (Basi Materiel). | PVC i n’a fɔ sugandili sariyalen; karti substrat wɛrɛw minnu bɛ bɛn ɲɔgɔn ma, olu bɛ se ka jateminɛ ka kɛɲɛ ni lamini sigicogo ni porozɛ ka ɲininiw ye. |
| Antena LF ye | A ka c’a la, joginda nɛgɛbere min dilannen don 125kHz puce ni kalanbaga sigida sugandilen kama. |
| Antena HF ye | Etched walima embedded antenna design tuned ka ɲɛsin 13.56MHz puce sugandilen ma, karti stack ani kalanbaga sigida. |
| Kɛnɛ | Blank prelaminated functional core, min laɲini ye ka fara ɲɔgɔn kan ni core sheets ye minnu bɛ se ka sɛbɛn ani/walima transparent overlays. |
| Ka kɛɲɛ ni mɔgɔw sago ye | Puce faralen ɲɔgɔn kan, antɛni jateminɛcogo, a labɛncogo, a bonya, a sɛbɛnfura hakɛ, a tɔgɔ sɛbɛnni taamasiyɛnw, a fɛnw jɔcogo, a foroko ni a sɛbɛnni. |
| Misali la Sɔn | Ɛntɛrinɛti misaliw ni Sanuman misaliw bɛ ladilikan di sani u ka kɛ jamaba la. Sɔrɔli, hakɛ ani doni tali bɛ dafa porozɛ kelen-kelen bɛɛ la. |
LF 125kHz TK4100 Inlay jɔcogo
HF 13.56MHz F08 Inlay jɔcogo
RFID prelam min bɛ kɛ ni frequency fila ye, o ye cɛmancɛ sɛbɛn ye min dilannen don ni lamini ye, min kɔnɔ, sɛrɛkili yɛrɛmahɔrɔnyalen fila bɛ sɔrɔ minnu tɛ ɲɔgɔn sɔrɔ karti jɔyɔrɔ kelen-kelen bɛɛ la. TK4100 sɛrɛkili bɛ baara kɛ ni 125kHz proximity-reader baarakɛminɛnw ye minnu bɛ bɛn ɲɔgɔn ma, k’a sɔrɔ F08 sɛrɛkili bɛ baara kɛ ni 13.56MHz kalanni sitɛmuw ye minnu bɛ bɛn ɲɔgɔn ma.
Ka sɛrɛkili fila ninnu fara ɲɔgɔn kan karti farikolo kelen kɔnɔ, o nafa ka bon ni jɛkulu dɔ ka kan ka LF sɔrɔcogo kɔrɔ dɔ mara k’a sɔrɔ a bɛ HF baarakɛminɛn danfaralen dɔ fara a kan. A tɛ protocole walima database fila ninnu fara ɲɔgɔn kan. Karti dibaga ka kan ka seere kelen-kelen bɛɛ tɔgɔ sɛbɛn ani k’a ɲɛnabɔ o cogo la min bɛ bɛn o ma.
TK4100 bɛ sugandi tuma caman na i n’a fɔ kalan dɔrɔn dantigɛlisɛbɛn 125kHz gɛrɛɲɔgɔnna kalanbagaw kama minnu bɛ bɛn ɲɔgɔn ma. A ka c’a la, a bɛ kɛ ni sistɛmu bɛ dantigɛli nimɔrɔ jɔlen dɔ kalan sanni ka baarakɛminɛnw kunnafoniw mara. Biti cogoya tigitigi, facility-code handling ani reader compatibilité ka kan ka dafa ni access-control integrator ye.
F08 bɛ kɛ ka caya i n’a fɔ 13,56MHz hakilijagabɔlan min tɛ ɲɔgɔn sɔrɔ, sitɛmuw kɔnɔ minnu bɛ bɛn ɲɔgɔn ma. Sannikɛla ka kan ka F08 bɔko tigitigi, hakilijagabɔ labɛnni, kilisi, UID minɛcogo, seko ni dɔnko kunnafoniw ani mɔgɔya kɛcogo sɛmɛntiya. 13,56MHz baarakɛ-fɛrɛnkan dɔrɔn tɛ a jira ko a bɛ se ka baara kɛ ni telefɔni seleke naani ye, NFC baarakɛminɛnw, MIFARE tɔgɔla-sitɛmuw walima ISO/IEC 14443 kalanbaga bɛɛ.
Smart-card daɲɛw la, a ka c’a la, dual frequency kɔrɔ ye arajo sitɛmu fila ye minnu tɛ ɲɔgɔn sɔrɔ i n’a fɔ LF + HF. A ka c’a la, dual interface bɛ tali kɛ contact puce kan ka fara contactless interface kan. Baara kɛ ni daɲɛ ɲuman ye ja, quotations ani sistɛm sɛbɛnw kɔnɔ walasa ka sanni filiw bali.
| Fɛn | TK4100 Kɛrɛfɛ | F08 Kɛrɛfɛ |
|---|---|---|
| Fiɲɛturukala | 125kHz LF ye | 13,56MHz HF ye |
| Jɔrɔ min bɛ kɛ cogoya la | Fixed-ID proximity credential (ID jɔlen) min bɛ se ka kɛ sababu ye ka don walima ka na kalanbagaw bɛ se ka baara kɛ ɲɔgɔn fɛ. | Hakilila-sɛbɛn kalan/sɛbɛnni HF karti baarakɛminɛnw kama minnu bɛ bɛn ɲɔgɔn ma. |
| Kalanbagaw ka kunnafoniw wajibiyalen don | Karamɔgɔ ka taamasiyɛn/modɛli, kunnafonidilanw cogoya min bɛ dɛmɛ, karti nimɔrɔ makɔnɔnen ani kalan janya laɲini. | Karamɔgɔ ka taamasiyɛn/modɛli, protocole, memory/key wajibiyalenw, UID politiki ani jagokɛcogo makɔnɔnen. |
| Mɔgɔya kɛcogo | A ka c’a la, a sinsinnen bɛ izini-porogaramu taamasiyɛn kan; a sɛgɛsɛgɛ ni sistɛmu bɛ nimɔrɔ suguya kɛrɛnkɛrɛnnen dɔ wajibiya. | A bɛ se ka kɛ ko sekɔtiri porogaramuw, kilisi, kunnafonidilanw walima bɔlikɛla fan fɛ tɔgɔ sɛbɛnni. |
| Lakanali jɔyɔrɔfalen | A bɛnnen don porozɛw ma minnu bɛ sɔn LF ka seereyaw basigilen kalanni dɔrɔn ma. | A bɛnnen don, o bɛ bɔ puce tigitigi ni lakana sariya la. Porozɛ kura walima lakanaba ka kan ka puce lakananen dɔ jira min dabɔra. |
| Telefɔni ka baarakɛcogo | Telefɔni seleke naani jɔnjɔnw tɛ 125kHz gɛrɛɲɔgɔnna seereyaw kalan cogoya la. | Aw kana a miiri ko smartfon bɛ se ka baara kɛ ɲɔgɔn fɛ; ka puce tigitigi, protocole ani telefɔni baarakɛminɛn laɲinitaw sɛgɛsɛgɛ. |
Antɛni fila minnu bilalen bɛ karti finman kelen kɔnɔ, olu bɛ se ka nɔ bila rezɔn na, kalan yɔrɔjan, lamination kɛcogo ani punching clearance. O la, antɛni jateminɛ ka kan ka dilan i n’a fɔ karti jɔcogo kelen min bɛ ɲɔgɔn kan sanni ka inlay yɛrɛmahɔrɔnyalen fila fara ɲɔgɔn kan k’a sɔrɔ u ma tiɲɛni kɛ.
LF bobine ni HF antɛni ka kan ka bila yɔrɔ la walasa ka jɛɲɔgɔnya ɲininenw dɔgɔya ani ka yɔrɔ jɛlenw to karti dawolo la, contact modules, magnetic stripes, signature panneaux, dingɛw walima die-cut features kɛrɛnkɛrɛnnenw kama. A dilanni ka kan ka kɔrɔbɔ ni karti dafalenw kulu yɛrɛ ye bawo layɛrɛ sɛbɛnnenw, dakunw ani fɛn minnu bɛ se ka fɛnw minɛ minnu bɛ kɛrɛfɛ, olu bɛ se ka nɔ bila RF baarakɛcogo la.
Puce pakew sigiyɔrɔw bɛ se ka kɛ sababu ye ka sigida kɔnɔna na, cushioning layers walima controlled material build-up. Chip-area dilancogo jugu bɛ se ka kɛ sababu ye ka bɔgɔbɔgɔ, fiɲɛ minɛ, ka sɛbɛnni tiɲɛ, ka delamination walima punch tiɲɛni kɛ. Ja min dabɔra, o ka kan ka puwɛnti koordinatɛriw ni sigida janya min yamaruyara, o jira.
Karti min bɛ kalan ka ɲɛ tabali kalanbaga kelen kan, o bɛ se ka baara kɛ cogo wɛrɛ la dondaw kalanbaga kan min sigilen bɛ kogo kan, lotɛli da tugulen, turnstile walima bololabaarakɛlan kan. Misali kartiw ka kan ka kɔrɔbɔ kalanbaga modɛli bɛɛ kan minnu bɛ bilali kɔnɔ, k’a ta ɲɛsincogo caman na ani lamini laban kɔfɛ.
HF Kalanbaga ka baarakɛminɛn
RFID baarakɛcogo misali
Prelam labɛn ka kan ka bɛn kiliyan ka sɛbɛnnikɛlanw ma, laminatɛri, kolɛri fɛɛrɛ, punching baarakɛminɛn ani fini-karti ɲɛsincogo. Layidu tɔgɔ i n’a fɔ 3×8 tɛ Se ka bɔli Bɔ; ja min bɛ kɛ ni hakɛ ye, o de wajibiyalen don.
| Ja Item Kunnafoni | ka dafa |
|---|---|
| Sɛbɛnw cogoya | Sɛbɛn bɛɛ lajɛlen bonya n’a janya, matiriyali, kariti fɔcogo, dakunw dakunw ani balo sira. |
| Karti jɔyɔrɔ | Karti labɛncogo dafalen, nkɔni radiyali, punching centerline ani ɲɛfɛ/kɔfɛ orientation. |
| LF ka sɛrɛkili | Bobine hakɛw, a jiginniw, a puwɛnti jɔyɔrɔ, a ɲɛminɛcogo ani a lakananen yɔrɔ min tɛ tigɛ. |
| HF ka sɛrɛkili | Antɛni labɛncogo, bridge/chip jɔyɔrɔ, tuning laɲini ani yɔrɔ lakananen min tɛ tigɛ. |
| I tɔgɔ sɛbɛnni | Optique taamasiyɛnw, punching taamasiyɛnw, sɛbɛnni sɛbɛnni taamasiyɛnw ani X/Y jiginni min bɛ se ka kɛ. |
| Fɛn wɛrɛw minnu bɛ yen | Contact-module cavity, magnetic stripe zone, signature panneau, foto yɔrɔ, slot hole walima custom shape. |
| Kartiw ka Stack | Kori min bɛ se ka sɛbɛn, prelam, overlays, adhesives, total target thickness ani layers sequence. |
RFID Hybride Karti jɔcogo dafalen
Layout min bɛ kɛ ni fɛn fila ye
LF ni HF puce references wajibiyalenw di, kalanbagaw ka misaliw, karti-nimɔrɔ cogoya, porogaramuw wajibiyalenw ani sɔnni yɔrɔjan. Aw kana sɔn puce dɔ ma min sinsinnen bɛ frequency dɔrɔn kan.
Aw bɛ sɛbɛn hakɛ, matiriyali, karti fɔcogo, antɛni cogoya, puce coordinates, inscription marks, punching direction ani full layer stack dafa.
Prelam sɛbɛnw ni karti dafalenw kɔrɔbɔ. Aw bɛ puwɛnti baarakɛcogo lajɛ, antɛni jaabi, yɔrɔ flakɛli, lamini bɛnkan, yecogo yecogo ani kalanbaga baarakɛcogo.
Funteni, tansiyɔn, sigi waati, funteni hakɛ ani nɛnɛ cogoyaw ka kan ka labɛn ni substrat ni overlay sugandilen ye. Funteni walima degun kojugu bɛ se ka antɛni lamaga, ka puce yɔrɔ tiɲɛ walima ka RF tuning Changer.
Sanuman misali bolonɔbilalen ka kan ka karti cogoya, a bonya, ɛntɛrinɛti kɛcogo ani kalanbaga ka baarakɛcogo min bɛ sɔn ka kɛ, o ɲɛfɔ walasa ka batch sɛgɛsɛgɛli kɛ kɔfɛ.
Baara kɛ ni lotɛli dɔnni ni bɛnkanw ye minnu bɛ tali kɛ misali tacogo la walasa ka tugu-tugu ɲɔgɔn kɔ ka bɔ puwɛntiw ni antɛniw na ka tɛmɛn prelam dilanni fɛ, karti laminini fɛ ani u dicogo laban fɛ.
| Sɛgɛsɛgɛli | Fɛn min ka kan ka lajɛ | Etape recommandé |
|---|---|---|
| Puce Identité (Dɔnniya min bɛ Puce) la | LF/HF puce reference tigitigi, UID walima serial data, lot traceability ani puce tiɲɛni yelen. | Components incoming ani prelam dafalen. |
| Antenna ka dafalenya | Tɛmɛsira, siriyɔrɔw, bobine ɲɛminɛcogo ani antɛni nafamafɛnw. | Sani prelamination ka kɛ ani a kɔfɛ. |
| RF Jaabi | LF ni HF bɛ baara kɛ u yɛrɛma, laɲini kalanden bɛnkan, ɲɛsincogo ani kalan-yɔrɔjan finɛtiri. | Bare prelam ani karti fini. |
| Kɛrɛnkɛrɛnnenya la, ɲɔgɔndɛmɛ | Aw ye a sɛgɛsɛgɛ ko ni aw ye kalanden kelen baara, o tɛ kɛwalew lawuli minnu tɛ sɔn ka kɛ kafoda filanan kɔnɔ. | Ɛntɛrinɛti misali ani Sanu misali. |
| Layidu talenw Sɛbɛnni | Puce ni antenne jɔyɔrɔ ka kɛɲɛ ni X/Y coordinates ye, punch line ani no-cut zones. | Production lot bɛɛ. |
| Masina ka jogo ɲuman | Fɛnɲɛnɛma hakɛ, a bonya, a flakɛ, a bugunw, a nɔgɔli, a sigida puce bump ani a sanfɛla tiɲɛni. | Prelam bɔli sɛgɛsɛgɛli. |
| Lamination Résultat | Peel resistance, warpage, card thickness, edge quality ani chip-area cogoya. | Finished-karti tiɲɛni. |
| Mɔgɔya kɛcogo | LF nimɔrɔ minɛcogo ɲuman, HF hakilijagabɔ/kilisi baarakɛcogo ani kunnafonidilanw sɛbɛnni. | Issuer walima system-integrator ka tiɲɛni. |
TK4100 + F08 faralen ɲɔgɔn kan, o bɛnnen don kosɛbɛ yɔrɔ min na kalanden sigida fila minnu bɛ yen, olu ka kan ka dɛmɛ sɔrɔ seere farikoloma kelen kɔnɔ ani o sitɛmu fila bɛɛ sɛgɛsɛgɛra ka kɛɲɛ ni puwɛnti sugandilenw ye.
Baarakɛlaw ni baarakɛlaw ka karti minnu bɛ baara kɛ ni LF dondaw kɔrɔw ye ani HF baarakɛminɛn danfaralen.
Kanpaɲi, kulu walima nafolo mara karti minnu bɛ seereyaw sigicogo fila fara ɲɔgɔn kan minnu bɛ bɛn ɲɔgɔn ma.
Waati-taama ni so-sɔrɔ-poroze minnu bɛ LF ni HF danfaralanw de wajibiya.
Kɔnɔnafili porozɛ minnu kɔnɔ jɛkulu dɔ bɛ ka wuli ka bɔ 125kHz kalanbagaw la ka taa 13,56MHz infrastructures la.
OEM smart-card production yɔrɔ min na karti izini bɛ sɛbɛnni, lamination ani punching kɛcogo dafalen kɔlɔsi.
Lotɛli dakunw, bolifɛnw, wari sarali, gɔfɛrɛnaman ka seereyaw walima sistɛmu wɛrɛw minnu bɛ kɔrɔsi, bɛnkan ni lakanani sɔnni ka kan ka bɔ sistɛmu tigi fɛ. Frequency match kelen tɛ bɔli kɛ.
| Porozɛ mago bɛ | sira min bɛ se ka kɛ, | Setigiya nafama |
|---|---|---|
| LF Identification basigilen | TK4100 walima LF ka seereyaw wɛrɛ min dabɔra kalan dɔrɔn kama. | Kalanbaga ka kunnafoniw cogoya ni karti-nimɔrɔ wajibiyalenw dafa. |
| LF Sɛbɛnni min bɛ se ka sɛbɛn | LF puce sɛbɛnnen min bɛ bɛn o ma, o bɛ se ka jateminɛ. | Porogaramu baarakɛminɛnw, hakilijagabɔ, tɔgɔlasɛbɛn/lakanani ani sariya siratigɛ la yamaruyaw dafa. |
| Karti hakilijagabɔ HF Legacy | F08 walima 13.56MHz hakilijagabɔ-puce wɛrɛ min dagalen don sistɛmu fɛ. | Kɔlɔsili, UID kɛcogo, hakilijagabɔ karti ani kalanbaga ka firimiwɛriw dafa. |
| Porozɛ kura HF min ɲɛsinnen bɛ Lakanali ma | Aw bɛ bi puwɛnti lakananen dɔ jira min sɔnna sistɛmu tigi fɛ. | Aw bɛ kriptografi, kilisi ɲɛnabɔli, ɲɛnamaya kɛcogo ani seereyaw wajibiyalenw ɲɛfɔ sani antɛni dilanni ka kɛ. |
| Telefɔni-Tap Marketing | NFC Forum-compatible puce dɔ sugandi min dabɔra smartfon ka jɛɲɔgɔnya kama. | Kɔrɔbɔli iOS ni Android minɛnw laɲinitaw kan; aw kana a miiri ko F08 bɛ bɛn ɲɔgɔn ma. |
| Tracking min bɛ yɔrɔ jan | UHF faralen ɲɔgɔn kan, o bɛ se ka kɛ ɛntɛrinɛti ye i n’a fɔ ɲɔgɔndan kɛcogo wɛrɛ. | Mara, kalanbaga, antɛni ɲɛsincogo ani RF sɛgɛsɛgɛli karti dafalenw de wajibiyalen don. |
RFID prelam sɛbɛnw ka kan ka lakana ka bɔ kuruli la, kuran bɔli la, degun yɔrɔw la, nɛnɛba la, nɔgɔ ma ani funteni min tɛ kɔrɔsi. Foroko ɲɛfɔli ka kan ka bɛn sɛbɛn hakɛ ma, puce profile, cicogo ani lot traceability wajibiyalen.
Aw bɛ baara kɛ ni fɛn sanumanw ye minnu bɛ ɲɔgɔn cɛ walima minnu bɛ mɔgɔ tanga walasa ka dɔ bɔ yɔrɔ sɔgɔsɔgɔninjɛ ni fɛnɲɛnamafagalanw tali la.
Aw bɛ sɛbɛnw to u ka kɛ fla ye ani ka u yɔrɔ bɛɛ dɛmɛ u tali waati.
Aw bɛ fɛn dilanni yɔrɔw fara ɲɔgɔn kan ani ka puwɛnti faralen ɲɔgɔn kan, u labɛncogo, u hakɛ ani u sɛgɛsɛgɛli cogoya dɔn.
Aw bɛ a to fɛnw ka balansi sɔrɔ sɛnɛyɔrɔ la sani u ka lamini ni u maracogo ni u ka baarakɛyɔrɔ cogoyaw tɛ kelen ye kosɛbɛ.
Wallis bɛ karti iziniw, RFID ɲɛnabɔbagaw ani fɛnw tila-tilabagaw dɛmɛ ni porozɛw ka puwɛntiw bɛnkan ye, antɛni kɛcogo ladamulen, sɛbɛnw labɛncogo labɛnni ani kariti ni fɛnw jɛli. Laɲini ye ka prelam sigicogo dɔ di min bɛ se ka tiɲɛ sannikɛla ka kalanden yɛrɛ ka kalanbaga ni lamini sigida la.
Ɲɛfɔli min ɲɛsinnen bɛ ɛntɛrinɛti ma : puce, antenne, reader, layout ani card stack bɛ lajɛ ɲɔgɔn fɛ.
Layidu tacogo dɛmɛni : matiriyaliw, hakɛw, tɔgɔsɛbɛnni taamasiyɛnw ani puce coordinates bɛ se ka tugu sannikɛla ka baarakɛminɛnw kɔ.
Fɛnɲɛnɛmaw faralen ɲɔgɔn kan : sɛbɛnw ni dakunw minnu bɛ se ka sɛbɛn, olu bɛ bɛn ɲɔgɔn ma, o bɛ se ka baro kɛ karti jɔcogo dafalen kama.
Sample-led qualification : injiniyɛri misaliw ni Golden Sample sɔnni bɛ dɔ bɔ jamaba dilanni farati la.
B2B sɛbɛnw : ja, fɛn dilannenw ɲɛfɔli, lotɛli dɔnni ani sɛgɛsɛgɛli wajibiyalenw bɛ se ka bɛn sanni yamaruya ma.
| Kunnafoni wajibiyalenw | Misali walima ɲɛfɔli |
|---|---|
| LF Puce ani Kalanbaga | TK4100 walima a wɛrɛ; kalanden ka taamasiyɛn/modɛli; bɔli/karti-nimɔrɔ cogoya wajibiyalen. |
| HF Puce ani Kalanbaga | F08 bɔko tigitigi walima a wɛrɛ; kalanden ka taamasiyɛn/modɛli; protocole, keys, memory ani UID wajibiyalenw. |
| Laɲini baara kɛcogo | Kalan yɔrɔjan/kɔrɔlen, ɲɛsincogo ani kɔrɔbɔli sigicogo frequency kelen-kelen bɛɛ la. |
| Ja min bɛ sɛbɛnfura kan | Bonya bɛɛ lajɛlen, a labɛncogo, karti fɔcogo, punch taamasiyɛnw, balo sira ani karti ɲɛsincogo. |
| Karti Stack dafalen | Core sheets, overlays, adhesives, layers imprimés ani target total thickness. |
| Karti ka baarakɛcogo wɛrɛw | Magnétique stripe, contact puce, signature panneau, slot, yɔrɔ jɛlen walima cogoya kɛrɛnkɛrɛnnen. |
| Kunnafoni minnu bɛ komandi kan | Misali hakɛ, jateminɛ hakɛ, pakew, taayɔrɔ ani sɛbɛnw wajibiyalenw. |
O ye karti-kɔnɔna ye min dafalen don, min kɔnɔ, 125kHz TK4100 sɛrɛkili ni 13,56MHz F08 sɛrɛkili danfaralen bɛ karti jɔyɔrɔ kelen-kelen bɛɛ la. Kɔfɛ, o sɛbɛn bɛ fara ɲɔgɔn kan ni layɛrɛw ni fɛnw ye minnu bɛ se ka sɛbɛn, ka lamini ani ka punch kɛ ka kɛ karti dafalenw ye.
Ayi, u ye puwɛnti yɛrɛmahɔrɔnyalenw ye minnu ka antɛni jɔcogo, u ka fɔcogo ani u ka kunnafonidilanw kɛcogo danfaralen don. LF ni HF ka seereyaw bɛ sɛbɛn ani ka ɲɛnabɔ u danma.
TK4100 bɛ sugandi caman na i n’a fɔ LF dɔnniyasɛbɛn min bɛ kalan dɔrɔn. Ni LF baarakɛcogo sɛbɛnnen wajibiyalen don, i ka kalanden, porogaramu minɛnw ani puce wɛrɛ min dagalen don, o ɲɛfɔ sani i ka quotation (fɔlikan) di.
F08 ni MIFARE Classic bɛ se ka baara kɛ ni 13.56MHz baarakɛminɛnw sigida kɔrɔw ye minnu bɛ tali kɛ ɲɔgɔn na, nka u man kan ka jira iko puce taamasiyɛn kelen. Puce dilabaga tigitigi, protocole kɛcogo, hakilijagabɔ, kilisi, UID wajibiyalenw ani kalanbaga ka bɛnkan dafa.
Ayi, baara kɛli ni 13,56MHz ye, o tɛ kɛ sababu ye ka puce (puce) kɛ a yɛrɛma ni NFC telefɔniw bɛɛ ye. Telefɔni seleke naani bɛnkan bɛ bɔ puce ni protocole tigitigi la, telefɔni minɛnw, baarakɛminɛnw ani baarakɛminɛnw.
A bɛ se ka jateminɛ dɔrɔn ni lotɛli dakun dilannikɛla walima sistɛmu integrateur ye puce, protocole, UID/key kɛcogo ani kalanbagaw ka bɛnkan wajibiyalenw dafa. Lotɛliw ka sigidaw tɛ ɲɔgɔn falen-falen ka da frequency dɔrɔn kan.
Kana a miiri ko o don. Sarali ni seereyaw porozɛ minnu bɛ lakana kosɛbɛ, olu bɛ puwɛntiw de wajibiya minnu dagalen don sistɛmu fɛ, kriptografi, seereyaw, mɔgɔya kɔlɔsili ani karti dafalen sɛgɛsɛgɛli. Puce plateforme min lakananen don kosɛbɛ, o bɛ se ka kɛ wajibi ye.
Awɔ. Sɛbɛn hakɛw, karti matiriyali, antɛni jateminɛ, puce coordinates, sɛbɛnni taamasiyɛnw, a janya ani karti ɲɛsincogo bɛ se ka labɛn ka bɔ ja fɛɛrɛbɔlen dɔ la min dabɔra.
Sisan, nin LF + HF prelam in ka jateminɛ hakɛ bɛ se milimɛtɛrɛ 0,55–0,60 ma. A bonya ni muɲuli lakika bɛ bɔ ɛntɛrinɛti yɔrɔw la, antɛni jɔli, substrat ani karti laban wajibiyalenw.
Aw bɛ frequence fila bɛɛ kɔrɔbɔ u yɛrɛma laɲini kalanbaga bɛɛ kan, o kɔ aw bɛ segin o kan sɛbɛnni, lamini, punch ani personalization kɔfɛ. Aw bɛ karti janya fana, a warpage, chip-area flatness, peeling ani antenne jɔyɔrɔ sɛgɛsɛgɛ.
Porozɛ in bɛ se ka baro kɛ i n’a fɔ prelam-only supply walima i n’a fɔ karti-materiel structure coordinated min kɔnɔ, printable core sheets and overlays bɛ sɔrɔ. Layɛrɛ bɛɛ ka kan ka se ka kɛ ɲɔgɔn fɛ sani u ka kɛ caman ye.
Aw bɛ puwɛntiw ɲɛfɔli tigitigiw, kalanbagaw ka misaliw, protocole ni kunnafoniw wajibiyalenw, layidu ja, antɛni/puce coordinates, thickness and dimensional tolerances, RF sɔnni sariyaw, pakew, sɛgɛsɛgɛli bolodacogo ani Golden Sample min dabɔra.
