|
Izini-direct rigid white PVC roll film for plastiki kartiw. Ladamuni, a bonya, a finman, a sanfɛla ani a sirili ka ɲɛsin offset sɛbɛnni ma, lamination, RFID inlays ani OEM karti caman cili ma.
core sɛbɛnfura
WALLIS ye baara kɛ
| Bonya: | |
|---|---|
| Kulɛri: | |
| A bonya: | |
| Hakɛ: . | |
Wallis rigid white PVC roll film for plastic cards ye PVC substrat opaque ye min bɛ se ka kɛ karti ye, min bɛ dilan walasa ka fɛn caman tigɛli, sɛbɛnni, lamination ani karti plastiki dilanni kɛ. A dabɔra karti dilannikɛlaw kama, sɛbɛnnikɛlanw, RFID inlay dilannikɛlaw ani karti-fɛnw tilabaga minnu bɛ basigi finman basigilen de wajibiya, a janya kɔlɔsilen, a flakɛ sabatilen ani batch baarakɛcogo min bɛ se ka da a kan.
O fɛnw bɛ se ka wuli ka kɛ karti sɛbɛnnenw kolomayɔrɔw ye banki kartiw, ID kartiw, lotɛli kilisi kartiw, kado kartiw, tɔndenw ka kartiw, baarakɛlaw ka badgew, don kartiw ani smart-card structures sugandilenw kama. Rollo bonya, a bonya, a finman, a opacity, a surface texture, corona treatment, winding direction, roll janya ani a foroko bɛ se ka baro kɛ ka kɛɲɛ ni sannikɛla ka sɛbɛnni ni a laminicogo ye.
Walasa ka baara kɛ ni dannaya ye, PVC hakɛ ka kan ka bɛn sɛbɛnni kɛcogo laɲininen ma. Offset walima silk-screen grades standards tɛ otomatiki di otomatiki la, absorbant coating min wajibiyalen don ji la inkjet systems fɛ. Sannikɛlaw ka kan ka sɛbɛnnikɛlan, tintin, lamini jɔcogo ani karti dafalenw ɲɛfɔcogo dɔn sani u ka sɔn misali ma.
| Paramɛtiri | Sɛgɛsɛgɛli min bɛ sɔrɔ |
|---|---|
| Minɛ | Film PVC karti finman gɛlɛn, opaque |
| Format de fourniture | Filimi min bɛ wuli; sɛbɛnw tigɛli ani ladamu tigɛ bɛ sɔrɔ poroze fɛ |
| A ka bon kosɛbɛ | Karti-kɔnɔna hakɛ minnu bɛ sɔrɔ tuma caman na, olu bɛ bɔ milimɛtɛrɛ 0,10 ɲɔgɔn na ka se milimɛtɛrɛ 0,85 ma; cogoya gɛlɛnw ka bon fo ka se milimɛtɛrɛ 1,50 ma ka kɛɲɛ ni rollability, width ani project confirmation ye |
| Ɲɛ | Kulɛri finman saniyalen, nɔnɔ finman, nɛnɛ finman, nɛrɛma, jɛlen walima ka kɛɲɛ ni a kɛcogo ye |
| Kɛnɛ | Matte walima texture kofɔlen; koronawirisi furakɛli ni sɛbɛnnikɛlan-kalan sugandilenw bɛ sɔrɔ |
| Sɛbɛnni kɛcogo minnu bɛ kɛ | Offset ani silk screen i n’a fɔ karti kalasi minnu bɛ kɛ tuma bɛɛ; UV, thermal transfer walima inkjet bɛ grade, ink ani minɛnw sɛgɛsɛgɛli de wajibiya |
| Jiginni-kɔnɔ-baarakɛcogo | Sɛbɛnni, lamini, punch, die tigɛ, karti fini ani RFID/NFC inlay structures sugandilenw |
| Custom Roll Data ye | Kuru bonya, kuru janya, kurukuru sira, a kɔnɔna cɛmancɛ, joli danw ani palɛti cogoya ka kɛɲɛ ni komandi ye |
| Baarakɛcogo minnu bɛ Kɛ cogoya la | ID, banki, kado, tɔnden, lotɛli kilisi, don, baarakɛla, RFID ani NFC kartiw |
| Misali ni MOQ | Misaliw bɛ sɔrɔ; MOQ ni sɛnɛcogo sariyaw bɛ bɔ a bonya, a bonya, a kulɛri ani a sanfɛla furakɛli la |
Nafama: 0,76mm bɛ tali kɛ tuma caman na ni CR80 karti dafalen janya tɔgɔlama ye. PVC core-film layɛrɛ kelen-kelen bɛɛ janya bɛnnen bɛ bɔ a jɔli dafalen na, i n’a fɔ core layers sɛbɛnnenw, overlays, adhesive layers, magnetic stripe ani inlay components.
PVC roll film finman gɛlɛn ye PVC substrat ye min bɛ to senna, min tɛ ye, min dilannen don walasa ka wuli ka kɛ plastiki-karti kɔnɔna layɛrɛw ye. A tɛ i n’a fɔ karti dafalen, filimu kurulen ye cɛmancɛfɛn ye min bɛ se ka sɛbɛn, ka tigɛ, ka sɛbɛn, ka lamini ani ka sɔgɔ ka kɛɲɛ ni sannikɛla ka karti jɔcogo n’a dilanni kɛcogo ye.
Rollo dilan bɛ se ka fɛnw baaracogo ɲɛ ani ka layini baarakɛcogo ɲɛ ka ɲɛsin fɛn caman tigɛlikɛlaw ma minnu bɛ ni roll-fed printing, coating, slitting walima lamination minɛnw ye. Sɛbɛnw dicogo bɛ se ka kɛ nafama ye kosɛbɛ offset pressew la, misali dilanni na walima karti iziniw na minnu bɛ baara kɛ ni sɛbɛnw cogoya jɔlenw ye. Wallis bɛ se ka baro kɛ fɛnw dilancogo bɛnnen kan ka da minɛnw ni san hakɛ kan.
Fɛn finman min bɛ kɔrɔsi, o bɛ danfara barikama dɛmɛ fotow, logow, barɔdiw, QR kodew, sɛbɛnni ɲumanw ani marka kulɛriw kama. Fɛnɲɛnɛma ni opacity ka kan ka sɔn ka kɛɲɛ ni misali ye min bɛ tali kɛ ɲɔgɔn na bawo karti porogaramu suguya wɛrɛw bɛ se ka kɛ sababu ye ka laɲiniw yecogo wɛrɛw wajibiya.
Surface texture ani corona furakɛli bɛ nɔ bila ji la, encre anchorage ani printed-ja stability. Dine hakɛ wajibiyalen bɛ bɔ tintiri sitɛmu ni sɛbɛnni kɛcogo la, o la, a ka ɲi ka surface-energie testing min bɛ na ani ka production print trial kɛ sani u ka sɔn kosɛbɛ.
A janya bɛ bɛn, a ka roll profile ani a ka waviness dɔgɔman bɛ se ka sɛbɛnni kɛ cogo kelen na, ka slitting, sheeting ani lamination kɛ. O fɛnw bɛ se ka dɛmɛ ka karti ni farikolo caman ɲɔgɔnnabɔli dɔgɔya, degun tɛ kelen ye, kurukuruni ani balo gɛlɛyaw la, hakɛ caman jiginni waati.
PVC gɛlɛn min bɛ se ka kɛ karti ye, o bɛ gɛlɛya di min ka kan ka kɛ walasa ka karti farikolo muɲu, k’a sɔrɔ a bɛ to ka baara kɛ ni sɛbɛnni, lamini ani punch ye. Furakɛcogo ni Vicat hakɛ ka kan ka sugandi ka kɛɲɛ ni lamini cycle laɲininen ye ani karti tali.
| Sɛbɛnni fɛɛrɛ | Ladililen Fɛnw wajibiyalenw | ka sɔnni sɛgɛsɛgɛli |
|---|---|---|
| Offset sɛbɛnni | PVC min bɛ se ka kɛ karti ye walima min furakɛra ni sɛbɛnni ye, ni a ka gɛlɛn ni a sanfɛla fanga bɛ kɔrɔsi | Enki nɔrɔli, a jalen, a dot definition ani a kari lamination kɔfɛ |
| Soie Écran Printing (Ecran de soie) min bɛ kɛ | Surface bɛ bɛn ni enki chimie sugandilen ye ani deposit thickness | Datugulan, furakɛli, nɔrɔli ani lamini sirili |
| Impression numérique UV (UV) ka baarakɛcogo | UV-printing grade dafara ka ɲɛsin imprimante, encre ani curing energy ma | Cross-hatch adhesion, flexibilité, kulɛri ani lamination bɛnkan |
| Ji-Based Inkjet min bɛ kɛ ni ji ye | Encre-receptive coating kɛrɛnkɛrɛnnen; ofset ordinaire PVC tɛ bɛn a yɛrɛma | A minɛcogo, a jalen teliya, a jibɔcogo ani a dacogo ni a datugucogo |
| Tɛmɛsira (Transfer) min bɛ kɛ ni funteni ye | Surface ni ribbon faralen ɲɔgɔn kan, o sɛgɛsɛgɛra ni kɔrɔbɔli ye | Transfer density, abrasion resistance ani kalanjɛ |
Sɛbɛnni kɔrɔbɔli ka kan ka baara kɛ ni sannikɛla ka tintin yɛrɛ ye, sɛbɛnnikɛlan sigicogo ani lamini kɔfɛ taabolo. Sɔn min sinsinnen bɛ sɛbɛnfura misali dɔrɔn kan min ma sɛbɛn, o tɛ karti dafalen baarakɛcogo jira.
| Sugandili Factor | Roll Film | sɛbɛn cogoya |
|---|---|---|
| Best Fit | Sɛbɛnni, finimugu, sɔgɔli, sɛbɛnfura walima fɛn caman tigɛli otomatiki la ka taa a fɛ | Offset sɛbɛnni min bɛ balo ni sɛbɛnw ye, prototyping ani lamination fixe-format |
| Sanni kunnafoniw kunbabaw | Bonya, janya, core ID, winding direction, maximum roll weight, joints ani edge quality | Janya, bonya, kɛnɛ, tigɛ muɲuli, sɛbɛnw pake kelen kɔnɔ ani palɛti cogoya |
| Faratiba minnu bɛ jogoɲumanya la | Telescoping, blocking, edge damage, gauge bands ani winding tension variation | Kurukuru, statiki, buguri, sɛbɛn-ni-sɛbɛn balili ani tigɛcogo caman ɲɔgɔnna |
PVC karti lamininen cogoya bɛ se ka kɛ ni datugulan jɛlen ye, PVC kɔnɔna sɛbɛnnen, kɔnɔbara finman walima RFID prelam inlay, dakun sɛbɛnnen filanan ani dakun filanan. Magnétique stripe, signature panneau, holographique security film walima contactless inlay components bɛ se ka don ɲɔgɔn na ka kɛɲɛ ni karti dilanni ye.
Lamini funteni, tansiyɔn ani sigi waati ka kan ka sigi sen kan kɔrɔbɔliw fɛ ni layɛrɛ stack dafalen ye. Labɛncogo ɲumanw bɛ bɔ PVC dilanni na, a lamini janya, a dacogo, a datugucogo, a datugucogo suguya, a laminicogo ani a nɛnɛcogo.
Aw bɛ laɲini karti, a laban janya, a layɛrɛ jɔcogo ani san ɲinini dafa.
Aw bɛ sɔn a bonya, a bonya, a kulɛri, a opacity, a sanfɛla ani a sɔgɔli cogoyaw ma.
Aw bɛ sɛbɛnni sɛgɛsɛgɛliw kɛ ni sɛbɛnnikɛlan ni tintiri yɛrɛyɛrɛ ye.
Aw bɛ karti dafalen lamini ani ka bond, curl ani appearance sɛgɛsɛgɛ.
Punch finiw kartiw ani ka baarakɛcogo walima muɲuli sɛgɛsɛgɛli dafa.
Aw bɛ sɔn sanu taamasiyɛn bolonɔbilalen dɔ ma ani fɛɛrɛko ɲɛfɔli sani a ka kɛ jamaba la.
A ka c’a la, PVC karti filimu gɛlɛnw dilanni kɔlɔsili bɛ tali kɛ fɛnɲɛnamafagalanw dilanni na, kalandriya walima u bɔli, a sanfɛla sɔgɔli, korona furakɛli, a janya sumani, a kulɛri ni a opasite sɛgɛsɛgɛli, a tigɛcogo, a sirili ani a lakanani pakew. Batch identification ka kan ka rolls dilenw siri ɲɔgɔn na ni sɛgɛsɛgɛli sɛbɛnw ye ani fɛn ɲɛfɔlenw ye minnu dabɔra.
| Sɛgɛsɛgɛli fɛn | Mun na a nafa ka bon | Sugged Confirmation |
|---|---|---|
| A bonya ni a Profil | A bɛ nɔ bila karti kulu janya la, lamination tansiyɔn na ani punching consistency la | Nafa tɔgɔlama, muɲuli ani cross-web profile bɛnna a kan ɲɛfɔli kɔnɔ |
| Fɛnɲɛnɛma, Kulɛri ani Opacity | A bɛ sɛbɛnnikɛlan-kulɛri yecogo ni dogocogo baarakɛcogo kɔlɔsi | Ɲɛjirali sariya walima minɛnw hakɛ min dabɔra |
| Surface Energie ani Texture (Surface Energie ani Texture) | A bɛ nɔ bila jisuma, baloli ani enki jɔli la | Dyne test ani surface reference ka kɛɲɛ ni sɛbɛnni hakɛ ye |
| Vicat ani Thermal Taamacogo | A bɛ lamination stable dɛmɛ ani ka dan sigi deformation | Grade sugandilen don sannikɛla ka lamination cycle ani karti suguya la |
| Roll Quality ye | A bɛ nɔ bila unwinding, web tracking ani automatique conversion na | Core, winding, edges, joints, blocking ani roll dɔnni sɛgɛsɛgɛra |
| Kɔrɔbɔli min kɛra ni karti ye min banna | A bɛ filimu, enki, overlay ani processus ka jɛɲɔgɔnya sabati | Printing, lamination, peel, curl, flexing ani baarakɛcogo sɛgɛsɛgɛliw i n’a fɔ a bɛ kɛ cogo min na |
PVC filimu finman bɛ se ka kɛ layɛrɛ sɛbɛnnenw ni jɔcogo ye sara-karti jɔli la minnu bɛ kɛ sababu ye ka yecogo kɔrɔsilen, lamini sabatilen ani punching tigitigi. Porozɛ kɛrɛnkɛrɛnnenw sɛgɛsɛgɛli ka kan ka kɛ magɛnni sɛrɛkili, puce ani sara-rɛzo wajibiyalenw na.
Basi finman bɛ ja, logo, sɛbɛnni, barɔdi ani donko-kɔlɔsili kunnafoniw dɛmɛ baarakɛlaw, kalanden, taamakɛlaw ani baarada ka kartiw kama.
PVC finman gɛlɛn bɛ sugandi kosɛbɛ karti porogaramuw kama minnu bɛ kɛ ni taamasiyɛn ye, yɔrɔ minnu na kulɛriw lasegincogo barikama, hakɛ bɔli musaka ka dɔgɔ ani don o don baarakɛcogo sabatili nafa ka bon.
Filimu bɛ se ka don karti jɔcogo sugandilenw kɔnɔ minnu tɛ ɲɔgɔn sɔrɔ ni RFID walima NFC prelam inlay ye min bɛ bɛn. Layɛrɛ laban kulu ka kan ka puce ni antɛni lakana ka sɔrɔ ka karti janya, a flakɛ ani kuran-baarakɛcogo laɲiniw dafa.
PVC kurulenw ka kan ka tanga ji ma, buguri ma, dakun tiɲɛni ma, tile yeelen tilennen ma, funteni kojugu ma ani fɛn caman tigɛli ma u marali ni u ta waati. Foroko bɛ se ka kɛ PE filimu ye, laban ɲɛda lakananenw, kɔnɔna barikamaw, kartɔnw walima palɛtiw, sɔgɔlifɛnw, sɛbɛnw ni minɛnw sirili ka kɛɲɛ ni kurukuru hakɛw ni cicogo ye.
Aw bɛ fɛnw mara u foroko fɔlɔ datugulen kɔnɔ fo ka se u baara ma ani ka a to kurukuruw ka ladamu u dilanni sigida la sani u ka da. A maracogo funteni, a marali waati ani a dalajɛli dan ka kan ka dafa fɛn dilannenw ɲɛfɔcogo kan walima a pakew dilanni cikan kan.
Fabrik-direct supply ka ɲɛsin karti dilannikɛlaw ma, fɛn caman tigɛlikɛlaw ani fɛnw tila-tilabagaw ma.
Ladamuni janya, bonya, kulɛri, opacity, surface treatment ani winding specifications.
PVC core sheet, overlay, magnetic stripe, holographie ani RFID/NFC fɛnw suganditaw minnu bɛ bɛn ɲɔgɔn ma.
Misali sɛgɛsɛgɛli ani sanu-sample sɔnni sani ka segin ka komandi caman kɛ.
Jagokɛlaw ka pakew, taamasiyɛnw ani fɛnw cicogo ɲɛnabɔli diɲɛ B2B sannikɛlaw ye.
Fɛɛrɛko baro min sinsinnen bɛ kiliyan ka sɛbɛnnikɛlan, tintin, laminatɛri ani karti jɔcogo kan.
| Waleyali | Karti suguya, karti porogaramu ani baarakɛyɔrɔ laɲininen |
| Fɛn minnu bɛ kɛ ka fɛnw ɲɛfɔ | A bonya, a bonya, a kulɛri, a opacity, a surface texture ani corona requirement |
| Roll Labɛncogo | Kuru janya walima a girinya, a kɔnɔna cɛmancɛ, a wulicogo ani a kuru hakɛ min ka bon kosɛbɛ |
| Sɛbɛnni kɛcogo | Offset, écran, UV numérique, encre walima thermal; imprimante ni enki kunnafoni ni a bɛ se ka kɛ yɔrɔ min na |
| Lamination Structure (Laminasiyɔn jɔcogo). | Overlay suguya, inlay, magnetic stripe, laɲini dafalen janya ani lamination cycle |
| Jagokɛlaw ka Donanw | Kɔrɔbɔli hakɛ, san ɲinini, taayɔrɔ, pakew ani sɛbɛnw wajibiyalenw |
A bɛ kɛ fɛn ye min bɛ se ka sɛbɛn walima min bɛ se ka jɔ karti plastiki lamininenw kɔnɔ, i n’a fɔ ID, tɔndenw, kado, lotɛli kilisi, banki, doncogo ani RFID/NFC karti jɔli sugandilenw.
A tɛ kɛ wajibi ye. 0,76mm ɲɔgɔn ye tɔgɔla janya ye min bɛ sɔrɔ CR80 karti dafalen na. A ka c’a la, PVC filimu layini kelen-kelen bɛɛ bɛ sugandi ka kɛ fɛn caman jɔli dɔ ye, o la, roll-film janya wajibiyalen ka kan ka jate ka bɔ karti kulu dafalen na.
Awɔ. Laada bonya, roll janya, winding direction, core diameter ani pakew bɛ se ka baro kɛ. A kɛcogo bɛ bɔ a bonya la, a dilanni bonya la, a tigɛcogo dantigɛli la ani a komandi hakɛ la.
PVC ofset walima siliki-screen gansan man kan ka miiri ko a bɛ baara kɛ ni inkjet imprimantew ye minnu bɛ bɔ ji la. A ka c’a la, sɛbɛnni min bɛ kɛ ni tintiri ye, o bɛ kɛ ni fɛn dɔ ye min bɛ se ka fɛnw minɛ, o min bɛ bɛn enki ma. Aw ye kunnafoni di sɛbɛnnikɛlan ni tintin kan ni aw bɛ misali ɲini.
Offset ni silk screen ka teli ka kɛ PVC ye min bɛ se ka kɛ karti ye. UV numérique, thermal transfer ani inkjet bɛ se ka jateminɛ ni grade ɲuman ni minɛn lakikaw ye. Sɛbɛnni bɛnkan ka kan ka sɔn lamini kɔfɛ, a man kan ka sɔn dɔrɔn sɛbɛnni kɔfɛ dɔrɔn.
Matɛriw ni sɛbɛnnikɛlanw minnu furakɛra ni korona ye, olu bɛ se ka dilan ka kɛɲɛ ni porozɛ ka ɲininiw ye. Surface-energie laɲini wajibiyalen ni sɛgɛsɛgɛli kɛcogo ka kan ka bɛn sani a ka dilan.
Awɔ. PVC karti filimu bɛ se ka lamini ni finimugu dafalenw ye minnu datugulen don walima minnu datugulen tɛ. Stack dafalen ka kan ka sɛgɛsɛgɛ ni a sirili fanga, a kurulen, a bugun, a sɛbɛnni kari ani a ka karti dafalen janya.
Ɔwɔ, ka ɲɛsin karti jɔli bɛnnenw ma. Layɛrɛ dilanni ni lamini cycle ka kan ka puce ni antenne lakana, wa a ka kan ka tiɲɛ ni baarakɛcogo sɛgɛsɛgɛli ye lamination ni punching kɔfɛ.
Sɛgɛsɛgɛli minnu bɛ kɛ tuma caman na, olu ye a bonya ni a ɲɛda cogoya, a bonya, a kulɛri, a opacity, a sanfɛla fanga, a kɛcogo, a ka Vicat grade, a roll edges, winding, joints, blocking, print adhesion ani finished-card lamination performance.
Baro bɛ se ka kɛ misaliw kan sɛbɛnni, lamini ani karti dilanni kɔrɔbɔliw kama. Sɔrɔli, misali hakɛ ani doni tali labɛnw bɛ bɔ hakɛ ni fɛn ɲɛfɔcogo wajibiyalen na.
MOQ bɛ bɔ a bonya la, a kurukuru bonya, a kulɛri, a sanfɛla furakɛli ani ni a ɲɛfɔcogo ye sariya ye walima ni a kɛra ka kɛɲɛ ni a yɛrɛ sago ye. Aw bɛ rollo labɛncogo wajibiyalen di sisan quotation dɔ kama.
Aw bɛ a mara ka datugu yɔrɔ saniyalen ni jalen na, yɔrɔ min ka jan tile yeelen tilennen na, funteni kojugu ani fɛn caman tigɛli. Aw bɛ sɛbɛnfura lakananenw mara u dakun tiɲɛni na ani ka a to u ka ladamu sani u ka sɛbɛn. Aw bɛ fura kɛrɛnkɛrɛnnenw maracogo ni a maracogo cikanw labato minnu bɛ sɔrɔ komandi fɛ.
Aw bɛ kuma Wallis fɛ n’aw ka karti ɲinini ye, sɛbɛnni kɛcogo, a janya wajibiyalen, a kurukuru bonya, a sanfɛla furakɛli, a hakɛ min bɛ kɛ san o san ani a taayɔrɔ. An ka jɛkulu bɛ se ka dɛmɛ don ka kɔrɔbɔli hakɛ dɔ dɔn ani ka B2B quotation labɛn PVC karti finman gɛlɛn filimu kama.
