|
Lamination Ga Kplu
Wallis ye nye esia
| Nusi wotsɔ wɔe: | |
|---|---|
| Anyigba: | |
| viɖe: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis custom patterned card lamination steel plate nye gakpo si mexɔ dzo o ƒe nyadzɔdzɔgbalẽ si wowɔ pɛpɛpɛ si wowɔ be woatsɔ atsyɔ̃ɖoɖo, nuŋɔŋlɔ alo etɔxɛ ƒe anyigba ƒe nɔnɔmewo ayi PVC , PETG , PC , ABS , RFID kple laminated card sheets bubu siwo sɔ dzi le hot-press wɔwɔ me.
To vovo na gakpo si mexɔ dzo o si wotsɔ ɖoa atsyɔ̃e dzro si wozãna tsɔ blaa xɔtuɖaŋuwoe la, wotrɔ asi le adzɔnu sia ŋu koŋ be wòanye kaɖi laminator ƒe kpeɖeŋutɔ . Ga si wotsɔ nɔnɔmetata wɔe la doa ka kple gotagome kaɖi ƒe ƒuƒoƒoa le lamination me ale be woate ŋu agbugbɔ nuŋɔŋlɔ si wotia la awɔ ɖe kaɖi ƒe agbalẽvi si wowu enu dzi hafi aƒoe, awɔe wòanye ame ŋutɔ tɔ alo awɔ dɔ le anyime.
Wallis doa alɔ nɔnɔme siwo wowɔ ɖe ɖoɖo nu, A3, A4 kple mɔ̃ tɔxɛ ƒe agbalẽvi ƒe didime, agbalẽvi ƒe titrime geɖe kple anyigba ƒe nuwuwu vovovowo na kaɖi dɔwɔƒewo, RFID inlay wɔlawo, smart-card wɔlawo kple kaɖi-nuawo mamalawo. Wallis lamination plate ƒe nɔnɔmewo koŋue nye 0.6 mm, 0.8 mm kple 1.0 mm , kple nɔnɔme bubuwo le mɔ̃ɖaŋununya ƒe kpeɖodzi te.
| Specification | Wallis Tiatia | Nuƒlela ƒe Kpeɖodzi |
|---|---|---|
| Nu si wowɔ | Dekɔnu Kpɔɖeŋu Kpekpeɖeŋugbalẽvi Lamination Stainless Steel Plɛti | Na kaɖia ƒe nuwuwu alo nufiame kpɔɖeŋu si wobia |
| Nu | Ga si mexɔ dzo o | Ele be woagblɔ gakpo ƒe dzesi alo eƒe sesẽ nenye be nuƒle ƒe dzidzenua kpɔ ŋusẽ ɖe edzi |
| Ŋkume | Embossed / textured / kpɔɖeŋu tɔxɛ | Da asi ɖe kpɔɖeŋu ƒe geometry, goglome kple nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi dzi |
| Kpɔɖeŋu ƒe Tiatiawɔblɔɖe | Grid, ƒutsotsoe, diamond, ati, aklala, seda, nuku kple nuŋɔŋlɔ siwo wowɔ ɖe ɖoɖo nu le alesi wòate ŋu adzɔe nu | Na kpɔɖeŋu ƒe kpɔɖeŋu, nutata alo nuwuwu-kaɖi ƒe nufiame |
| Tiatiawɔblɔɖe ƒe Titrime | 0.6 mm / 0.8 mm / 1.0 mm ƒe didime; nyatakaka bubu siwo ŋu woate ŋu aɖo kpee | Tsɔ laminator si li fifia kple press-stack ƒe nɔnɔme sɔ kple wo nɔewo |
| Plɛti ƒe Agbɔsɔsɔme | A4 / A3 / mɔ̃-koŋ ƒe lolome si wowɔ ɖe ɖoɖo nu | Wokafu didime kple kekeme pɛpɛpɛ ɖe A3/A4 nyagbɔgblɔwo ɖeɖeko teƒe |
| Axa Siwo Wowɔ Kpɔɖeŋu | Woate ŋu ada axa ɖeka alo axa eve ƒe kpɔɖeŋu xɔtutu kpɔ | Kpɔe ɖa be akpa evea siaa hiã be woawu enu ɖekae alo ato vovo |
| Edge ƒe Atikewɔwɔ | Nugbɔ siwo le gbadzaa, siwo wotso eye woɖe ɖa le wo ŋu; dzogoedzidɔdamɔnu si wowɔ ɖe ɖoɖo nu li | Na dzogoe ƒe didime alo nɔnɔmetata le afisi wòhiã le |
| Film si Kpɔa Ame Ta | Woate ŋu agblɔ film si kpɔa ame ta le anyigba dzi be woaɖoe ɖe amewo | Ðo kpe film ƒomevi kple eɖeɖe ƒe nudidiwo dzi |
| Nusi sɔ kple Kaadi ƒe nɔnuwo s | PVC , PETG , PC , ABS kple kaɖi ƒe wɔwɔme siwo wowɔ ɖekae siwo sɔ | Da kpe dzoxɔxɔ, nyaƒoɖeamenu kple asiɖeɖe le nuwɔna ŋu kple kaɖi ƒe ƒuƒoƒo ŋutɔŋutɔ |
| Dɔbiagbalẽviwo | Ame ŋutɔ ƒe agbalẽvi, hamevinyenye ƒe agbalẽvi, nunana gbalẽvi, ID gbalẽvi, RFID agbalẽvi, etɔxɛ gbalẽvi kple kaɖi ƒe ŋgɔdonya gbalẽviwo | Ele be woada asi ɖe nuŋɔŋlɔ mamlɛtɔ dzi le laminated card si wowɔ vɔ la dzi |
| OEM Trɔ asi le eŋu | Kpɔɖeŋu, lolome, titrime, nugbɔ ƒe atikewɔwɔ, ametakpɔnu film, nubabla kple dzeside | Dɔwɔnu alo ɖoɖowɔwɔ ate ŋu awɔ dɔ ɖe nuŋɔŋlɔ yeye siwo wowɔ ɖe ɖoɖo nu dzi |
| Ɣeyiɣi si Woatsɔ Akplɔ Amewoe | Woyɔ nya tso kpɔɖeŋu, didime, agbɔsɔsɔ kple tɔtrɔ ɖe nɔnɔme ŋu nu | Ðo kpe edzi le mɔ̃ɖaŋununya ƒe nɔnɔmetatawo ƒe mɔɖeɖe vɔ megbe |
Mɔfiame si ku ɖe eŋu: Ele be woagblɔ kaɖi-lamination-gbadzɛwo le laminator ƒe dɔwɔwɔ ƒe teƒe ŋutɔŋutɔ kple press-stack ƒe nɔnɔme si ŋu woda asi ɖo nu. Le adzɔnuwo ƒe hatsotso sia gome la, 0.6 mm, 0.8 mm kple 1.0 mm ye nye titrime vevitɔ siwo ŋu woƒo nu tsoe, esime ele be agbalẽvi ƒe didime kple kekeme nasɔ kple asisi la ƒe mɔ̃ tɔxɛ ƒe nudidiwo.
A patterned card lamination steel plate nye gakpo si mexɔ dzo o ƒe nyadzɔdzɔgbalẽ si woate ŋu azã ake si ŋu wokpɔa ŋusẽ ɖo le embossed alo textured contact surface. Wotsɔe dea kaɖi-laminator bibi aɖe ƒe hot-press stack me be wòawɔ atsyɔ̃ɖoɖo ƒe nɔnɔme aɖe koŋ ɖe plastic card-gbadzɛ aɖe ƒe gota gome.
Ne wodo dzo na kaɖi ƒe nu veviwo, Overlay film s kple ƒuƒoƒo bubuwo hezi wo dzi la, kaɖi ƒe nu si le gota la doa ka kple gakpo si ŋu nɔnɔmetata le. Le dɔwɔwɔ ƒe nɔnɔme siwo sɔ me la, anyigbaa kplɔa agbalẽa ƒe nɔnɔme ɖo eye wòléa nukpɔkpɔ alo asikaka nɔnɔme ma me ɖe asi le fafa vɔ megbe.
Gakpo ƒe nɔnɔmetata nye anyigba ƒe nɔnɔme ŋutɔŋutɔ tsɔ wu be wòanye nutata si wota. Nɔnɔmetatawo kple amadedewo tsoa agbalẽtata ƒe ƒuƒoƒoa me, esime gakpoa kpɔa ŋusẽ ɖe anyigba ƒe nɔnɔme, eƒe keklẽ kple asikaka eŋu ƒe dzedzeme dzi.
Zi geɖe la, xɔtuɖaŋu ƒe gakpo si mexɔ dzo o ye nyea xɔtunu si wotsɔ ɖo atsyɔ̃e si wowɔ vɔ la ŋutɔ. Card lamination steel plate nye dɔwɔnu si wozãna enuenu tsɔ wɔa plastic card sheets boŋ.
Nuku nyuiwo ƒe nuŋɔŋlɔ ate ŋu ana kaɖi ƒe akpa si woate ŋu aka asi le nu ŋu le mɔ si menya kpɔna dzea sii bɔbɔe o kple esi me mekɔna tututu o evɔ maɖu nutata siwo wota dzi o. Kpɔɖeŋu siawo sɔ na hamevinyenye ƒe agbalẽviwo, agbalẽvi siwo ƒe ŋkɔ woŋlɔ kple nu bubu siwo hiã be woawɔ nusiwo womede dzesii o.
Nusiwo wotsɔ seda alo aklala wɔe la naa nukpɔkpɔ ƒe nɔnɔme si wotsɔa mɔfiame alo lãgbalẽ lɔ̃na. Wozãa agbalẽvi ƒomevi mawo tɔgbe hã le RFID inlay kple prelam dɔwɔwɔ tiatia aɖewo me afisi wòhiã be woawɔ anyigba si dzi woate ŋu akpɔ ŋusẽ ɖo si le gbadzaa.
Ati, ati-ku kple organic textures ateŋu atsɔ atsyɔ̃ɖoɖo ƒe dzesidenu sesẽ aɖe akpe ɖe hamevinyenye, nunana, boblododo kple nuƒoƒoƒu ƒe agbalẽvi siwo wowɔ ɖe ɖoɖo nu ŋu.
Woateŋu ada grid, diamond, wave kple geometric structure bubu siwo wogbugbɔ gblɔna kpɔ na branded alo specialty cards afisi anyigba ƒe nɔnɔme nye nukpɔkpɔ ƒe nɔnɔme ƒe akpa aɖe.
Woate ŋu adzro kpɔɖeŋu yeyewo me to nufiamegbalẽvi, agbalẽvi si wowɔ vɔ, ŋutilã me nɔnɔme ƒe kpɔɖeŋu alo aɖaŋu ƒe susu zazã me. Ele be woaɖo kpe dɔwɔnu ƒe ŋutete, kpɔɖeŋu gbugbɔgawɔ, goglome, lolome kple MOQ dzi hafi woawɔ tɔtrɔ ɖe ɖoɖo nu.
| Steel Plate Type | Surface Character | Dɔwɔwɔ si bɔ |
|---|---|---|
| Ahuhɔ̃e / Ultra Glossy | Anyigba si le gbadzaa si wokɔ nyuie ŋutɔ | Plastik-kaɖi siwo klẽna ŋutɔ |
| Matte Nyui aɖe | Low-reflection nyui nuŋɔŋlɔ | ID, hamevinyenye kple asitsatsa ƒe agbalẽvi siwo hiã be woawɔ anyigba si dzi womeƒoa nu le o |
| Matte si ƒe amadede nye aŋutiɖiɖi | Nuwɔwɔ si me kɔ wu si dzena wu | Etɔxɛe asikaka kaɖi ƒe anyigbawo |
| Ɖetsi | Mɔfiame nyui alo nɔnɔme si wolɔ̃ | RFID prelam, inlays kple ame ŋutɔ ƒe kaɖi ƒe dɔwɔwɔ |
| Kpɔɖeŋu Tɔxɛ | Atsyɔ̃ɖoɖo ƒe nɔnɔme si woɖe fia abe nuku, ati, grid, diamond alo custom pattern | Plastik-kaɖi siwo wowɔ na ame ŋutɔ eye woŋlɔ ŋkɔ na wo |
Ele be nuŋɔŋlɔa nanɔ ɖeka le nukpɔkpɔ me le agbalẽvi ƒe teƒe si woate ŋu azã la katã. Vovototo siwo le kpɔɖeŋu ƒe goglome alo gɔmesese me ate ŋu ana vovototo siwo woate ŋu akpɔ le agbalẽvi siwo woƒo tso teƒe vovovowo le agbalẽ ɖeka ma ke si wotsɔ lãgbalẽ wɔe la dome.
Ke, nu suesuesuewo, nusiwo susɔ, ʋuʋudedi kple ʋuʋudedi siwo womedi o ate ŋu atrɔ ayi plastic la dzi le lamination me. Eyata agbawo me toto kple wo ŋu kɔklɔ nye mɔnu vevi siwo wozãna tsɔ léa ŋku ɖe woƒe nyonyome ŋu.
Gbadzaƒe si li ke kpena ɖe ame ŋu be kadodo nɔa anyi ɖaa le lamination stack la me. Plɛti si wotro ate ŋu awɔ akpa aɖe le nyaƒoɖeamenu si mesɔ o, anyigba ƒe nɔnɔme ƒe tɔtrɔ kple kaɖi-gbalẽvi ƒe emetsonu siwo meli ke o me.
Nugbɔ siwo wowu enu nyuie la ɖea afɔku si li be ʋuƒo ɖaɖɛwo nagblẽ nu le kaɖiwo, akɔtaɖonuwo, dɔwɔlawo alo nusiwo wotsɔ wɔa nu siwo te ɖe wo nɔewo ŋu la dzi kpɔtɔna.
Card lamination plates nye dɔwɔnu siwo woate ŋu azã ake. Subɔsubɔ ƒe agbenɔƒe ŋutɔŋutɔ nɔ te ɖe agbalẽa ƒe nusiwo wotsɔ wɔe, eƒe anyigba ƒe nɔnɔme, dzoxɔxɔ, nyaƒoɖeamenu, dzadzɛnyenye mɔnu, eŋudɔwɔwɔ kple seɖoƒe si dzi woda asi ɖo be wòado na kaɖi si wowɔ vɔ la dzi.
PVC nye nusiwo wozãna wu kple patterned lamination steel plates dometɔ ɖeka. Dɔbiagbalẽviwo dometɔ aɖewoe nye hamevinyenye ƒe agbalẽvi, nuteƒewɔwɔ ƒe agbalẽvi, nunana gbalẽvi, mɔɖeɖe ƒe agbalẽvi, boblododo gbalẽvi kple plastic gbalẽvi tɔxɛwo.
Woateŋu atsɔ PETG kaɖigbalẽviwo hã ada agbalẽvi siwo ŋu nɔnɔmetata le la kpɔ. Ele be lamination ƒe nuɖaɖaa nasɔ kple PETG core, Overlay film kple agbalẽtata ƒe ɖoɖo si wotia.
PC kaɖiwo ateŋu abia lamination ƒe dzoxɔxɔ kple nyaƒoɖeamenu ƒe nɔnɔme vovovowo tso PVC si bɔ gbɔ. Eyata ele be woaɖo kpe plate ƒe sɔsɔ dzi ɖe PC wɔwɔ ƒe tsatsam ŋutɔŋutɔ nu.
Woateŋu azã kpɔɖeŋu kple seda ƒe lamination plates le RFID kaɖi kple prelam dɔwɔwɔ tiatia siwo me wotsɔa inlays, antennas kple gota kaɖi nuawo ƒoa ƒu ɖekae le dzoxɔxɔ kple nyaƒoɖeamenu si dzi wokpɔna te.
Woateŋu ado ABS kple nu geɖe ƒe kaɖi ƒe wɔwɔme siwo sɔ hã kpɔ. Ele be nuƒlelawo nada asi ɖe nuawo ƒe ƒuƒoƒo bliboa dzi tsɔ wu be woatsɔe be dɔwɔwɔ sɔ le PVC , PETG , PC kple ABS dome.
Dzra kaɖi ƒe agbalẽvi siwo wota, nu veviwo, Overlay film s, RFID inlays kple ƒuƒoƒo bubuwo ɖe ɖoɖo nu le kaɖi ƒe wɔwɔme si dzi woda asi ɖo nu.
Kpɔ gakpoawo ƒe gowo ɖa be nu suesuesuewo, ɖiƒoƒo wo, ʋuʋudediwo, ʋuʋudediwo kple dzesi bubu siwo mèdi o hafi woawɔe ƒe hatsotso ɖesiaɖe.
De kaɖigbalẽwo lamination-gbadzɛawo dome ɖekae kple alẽfu, silicone alo cushion nu bubu siwo hiã le laminator ƒe ɖoɖo nu.
Ƒu du lamination ƒe tsatsam si dzi woda asi ɖo la. Ele be dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woatsɔ anɔ anyi la nawɔ ɖe kaɖia ƒe nuzazãwo ƒe nɔnɔme kple ewɔwɔ ƒe nuɖaɖa si ŋu woda asi ɖo dzi.
Fafa si dzi wokpɔna kpena ɖe aŋekaɖigbalẽvia ŋu wòli ke eye wòléa anyigba ƒe nɔnɔme si wotsɔ yi teƒe bubu la ta hafi ɖea agbaa le eme.
Lé ŋku ɖe nuŋɔŋlɔ ƒe ɖekawɔwɔ, gbadzaƒe, kuɖɔ, anyigba ƒe nɔnɔme madeamedziwo, asiɖeɖe le nu ŋu ƒe nuwɔna kple tata ƒe dzedzeme ŋu hafi laminated sheet la naʋu ayi punching alo personalization dzi.
Ne ehiã be nàgbugbɔ kaɖi ƒe nɔnɔme si li xoxo la, ɖo kaɖi alo gakpo ƒe kpɔɖeŋu si dzi woda asi ɖo ɖe afisi wòanya wɔ le. Nufiame ŋutɔŋutɔ naa nyatakaka siwo me kɔ wu tso goglome, keklẽ kple asikaka ame ŋu ƒe nɔnɔme ŋu wu foto ɖeɖeko.
Le kpɔɖeŋu yeye siwo wowɔ gome la, na motif si gbugbɔna, didime, kpɔɖeŋu ƒe mɔfiame kple nukpɔkpɔ ƒe ŋusẽkpɔɖeamedzi si nèdi. Mɔ̃ɖaŋununya me toto ɖenɛ fiana nenye be woate ŋu awɔ aɖaŋua abe lamination plate ene.
Ele be woawɔ mɔfiame ƒe nɔnɔmetatawo abe seda, aklala, ƒutsotsoe alo atikutsetse ene ɖe alesi woɖoe be woatsɔ agbalẽvia aɖoe nu. Ele be woaɖo kpe esia dzi hafi woawɔ agbalẽvi siwo wowɔ ɖe ɖoɖo nu.
Mɔnu si ŋu kakaɖedzi le wu si dzi woato ada asi ɖe edzi enye be woatsɔ kpɔɖeŋu gbadzɛa awɔ laminate na asisi la ƒe PVC , PETG , PC ŋutɔŋutɔ alo kaɖi ƒe wɔwɔme bubu eye woatsɔ nɔnɔme si wowu enu la asɔ kple dzidzenu si woɖo taɖodzinu na.
Tso nya me nenye be nudidia nye nuku si menya kpɔna dzea sii bɔbɔe o, seda ƒe nɔnɔme, aklala ƒe ŋusẽkpɔɖeamedzi, geometri ƒe nɔnɔme, ati ƒe nɔnɔme alo atsyɔ̃ɖoɖo ƒe anyigba si wowɔ ɖe ɖoɖo nu.
Na plate ƒe didime alo laminator ƒe dɔwɔƒe si li fifia. Milimeta ƒe didime pɛpɛpɛ nyo wu nuŋlɔɖi siwo wozãna le mɔ gbadza nu abe A3 alo A4 ene.
Wallis ŋlɔ 0.6 mm, 0.8 mm kple 1.0 mm na eƒe card-lamination gakpo ƒe agbalẽ ƒe didime. Zã agbalẽvi ƒe nɔnɔme si sɔ kple laminator stack si ŋu woda asi ɖo negbe ɖe woda asi ɖe tɔtrɔ aɖe dzi le mɔ̃ɖaŋununya me hafi.
Gblɔ nenye be kaɖia zãa PVC , PETG , PC , ABS , RFID prelam alo xɔtutu bubu ale be woate ŋu awɔ ɖoɖo ɖe ewɔwɔ dodokpɔ si sɔ ŋu.
Ne woazã gakpoa ƒe akpa eveawo la, gblɔ nenye be wohiã nɔnɔmetata siwo sɔ, nɔnɔme vovovowo alo nɔnɔmetata ɖeka kple ɖeka si woatsɔ awɔ dɔ bubu.
Dzoxɔxɔ, nyaƒoɖeamenu, dzoxɔxɔ ƒe ɣeyiɣi, fafa ƒe tsatsam, cushion pad kple stack ƒe ɖoɖowɔwɔ kpena ɖe dɔwɔwɔ ƒe nɔnɔme ŋu.
Zã kpɔɖeŋu gbadzɛ le laminator ŋutɔŋutɔ me nàtsɔ aɖo kpe kpɔɖeŋu ƒe asitɔtrɔ, kaɖi ƒe asiɖeɖe le eŋu, anyigba ƒe dzedzeme kple didime ƒe liƒo dzi hafi nàda asi ɖe ewɔwɔ le agbɔsɔsɔ gã me dzi.
| Issue | Steel Plate Kpɔ | Nu Bubuwo ɖa |
|---|---|---|
| Kpɔɖeŋu si Mesɔ O ƒe Trɔtrɔ | Kpɔ texture ɖekawɔwɔ kple plate flatness ɖa | Nyaƒoɖeamenu ƒe ɖekawɔwɔ, cushion pads kple agbalẽ ƒe titrime |
| Dzesi Siwo Womekpɔ Mɔ Na O le Anyigba Dzi | Lé ŋku ɖe ʋuʋudedi, ʋuʋudedi kple nu suesuesuewo ŋu | Ðiƒoƒo si le kaɖiwo ƒe ƒuƒoƒo me |
| Kpekpeɖeŋugbalẽvi ƒe Kpekpeɖeŋunana | Kpɔ agbaa ƒe dzadzɛnyenye kple eƒe gowo ƒe nɔnɔme ɖa | Overlay film atikewɔwɔ, dzoxɔxɔ kple fafa |
| Agbalẽvi ƒe Warpage | Kpɔe ɖa be agbalẽa ƒe gbadzaƒe le gbadzaa hã | Dzoxɔxɔ, fafa, nyaƒoɖeamenu kple nusiwo wotsɔ wɔe ƒe ɖeɖeɖa |
| Kpɔɖeŋu si Gbɔdzɔ akpa | Kpɔ kpɔɖeŋu ƒe goglome kple agbalẽa ƒe vuvu ɖa | Dzoxɔxɔ, nyaƒoɖeamenu, Overlay film ƒe wɔwɔme kple fafa |
| Kpɔɖeŋua Sesẽ akpa | Ðo kpe agbalẽa ƒe nɔnɔme si nètia dzi | Lamination nuɖaɖa kple plastic anyigba dzi ŋuɖoɖo |
Ga gbadzɛ siwo ŋu wowɔ nɔnɔmetata ɖo la hiã be woakpɔ nu nyuie wu ga gbadzɛ dzrowo elabena woate ŋu agbugbɔ awɔ nusi gblẽ le wo ŋu ɖesiaɖe ɖe agbalẽvi si wowɔ vɔ la dzi. Le nudɔdɔ ƒe ɖoɖo si dzi woda asi ɖo nu la, ŋkuléle ɖe nu ŋu ate ŋu anye:
Plɛti ƒe titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu
Didime kple kekeme
Plɛti ƒe gbadzaƒe
Kpɔɖeŋu ƒomevi kple kpɔɖeŋu ƒe mɔfiame
Texture consistency le teƒe si woate ŋu azã la katã
Anyigba ƒe ʋuʋudedi, ʋuʋudedi kple ɖiƒoƒo
Axa ɖeka alo akpa eve ƒe nuwuwu
Edge deburring kple dzogoe ƒe nɔnɔme
Ametakpɔnu film ƒe nɔnɔme le afisi wogblɔe le
Kpɔɖeŋu lamination emetsonu le afisi wòhiã le
Nubablɛwo kple agbalẽviwo ƒe dzeside
Ga si wotsɔ nɔnɔmetata wɔe ate ŋu adze ato vovo hafi wotsɔe yi PVC alo PETG dzi kple emegbe. Le ɖoɖo siwo me dzedzeme le vevie gome la, lé gakpo si dzi woda asi ɖo kple kaɖi ƒe kpɔɖeŋu si wowɔ vɔ siaa ɖe te be woanye nusiwo woatsɔ awɔe.
Ele be woakpɔ kpɔɖeŋu ƒe anyigbawo ta tso ga kple ga ƒe tutu, woƒe ƒoƒo kple ɖiƒoƒo le wo tsɔtsɔ yi teƒe bubuwo me. Woate ŋu agblɔ ametakpɔnu film, separators kple rigid export packaging le nudɔdɔ ƒe nudidiwo nu.
Ðe ke kple nusiwo susɔ ɖe ewɔwɔ me ɖa to mɔnu si sɔ kple gakpo si mexɔ dzo o kple anyigba si dzi wowɔ nɔnɔmetata ɖo la zazã me. Ðiƒoƒo si wogblẽ ɖe nɔnɔme nyui me ate ŋu atrɔ ayi agbalẽvi la dzi emegbe.
Abrasive polishing ateŋu atrɔ nuku nyuiwo, seda alo matte ƒe nɔnɔme tegbee. Ele be dzadzɛnyenye naɖe ɖiƒoƒo ɖa evɔ womatrɔ asi le eƒe nɔnɔme si dzi woda asi ɖo ŋu o.
Dzra agbawo ɖo ɖe nusiwo le gbadzaa siwo le gbadzaa dzi be woaɖe afɔku si le be woabɔbɔ wo kple woƒe nɔnɔme ƒe gbegblẽ dzi akpɔtɔ. Ƒo asa na nuƒoƒoƒu si dzi womeɖu o le afisi mo siwo ŋu nɔnɔmetata le la ƒoa ga bubuwo tẽe.
Ne ʋuʋudedi, ʋuʋudedi alo akpa aɖe si vuvu dze enuenu le agbalẽvi siwo wotsɔ lãgbalẽ wɔe dzi la, ele be woalé ŋku ɖe agbalẽvi si ŋu dɔlélea le ŋu ahadzrae ɖo le afisi wòanya wɔ le alo aɖɔlii.
Kluviwo, amedzrodzeƒewo, kamedefefewɔƒewo kple hameviwo ƒe ɖoɖowo ate ŋu azã asikaka nu ŋu alo atsyɔ̃ɖoɖo ƒe nuŋɔŋlɔwo atsɔ ade vovototo kaɖi ƒe adzɔnuwo ƒe nyonyome dome.
Nudzraƒewo kple nunanagbalẽvi siwo ŋu ŋkɔ le ate ŋu atsɔ nutata siwo wota kple anyigba ƒe nɔnɔme ŋutɔŋutɔ aƒo ƒui be wòana kaɖia ƒe dzedzeme nato vovo wu.
Kpekpeɖeŋugbalẽvi ƒe nuŋɔŋlɔ siwo wowɔ ɖe ɖoɖo nu ate ŋu ado ŋusẽ nukpɔkpɔ ƒe dzeside na boblododo, wɔnawo kple asisiwo ƒe nuwɔwɔ aduadu ƒe ɖoɖowo.
RFID mɔɖeɖe, amedzrodzeƒe kple sukuxɔ me kaɖiwo ateŋu azã nuŋɔŋlɔ ƒe nuwuwu tiatia ne kaɖi mamlɛtɔ tutu kple ame ŋutɔ ƒe tɔtrɔ ƒe ɖoɖoa sɔ.
Atsyɔ̃ɖoɖo ƒe nɔnɔmewo ɖea vi ŋutɔ na agbalẽvi siwo ƒe tata seɖoƒe li na, siwo woate ŋu aƒo ƒu kple esiwo wowɔ etɔxɛe le afisiwo asikaka nu ŋu ƒe dzedzeme nye nusi wowɔ ƒe asixɔxɔ ƒe akpa aɖe.
Woate ŋu ada seda alo gakpo siwo ŋu woŋlɔ nu ɖo hã kpɔ na RFID inlay kple prelam sheet dɔwɔwɔ tiatia siwo hiã be woawɔ anyigba tɔxɛ aɖe le lamination megbe.
Wallis naa PVC , PETG kple PC kaɖi ƒe agbalẽviwo, Overlay film s, RFID inlays, lamination steel plates, wool pads, silicone pads kple nusiwo do ƒome kplii hena dɔnyala bibiwo ƒe kaɖiwo wɔwɔ.
Ahuhɔ̃e si le keklẽm, matte, seda kple anyigba siwo ƒe nɔnɔme wowɔ ɖe ɖoɖo nu la ɖea mɔ na kaɖiwɔlawo be woato agbalẽvi siwo wowɔ vɔ ƒe nɔnɔme vovovowo vɛ to agbalẽvi ƒe nɔnɔme siwo sɔ na nu ɖesiaɖe zazã me.
Woate ŋu alé ŋku ɖe mɔ̃a ƒe didime tɔxɛwo ŋu le lamination-dɔwɔnu siwo li nu tsɔ wu be woazi nuƒlela dzi be wòaxɔ agbalẽvi ƒe nɔnɔme ɖeka si wozãna ɖaa.
Nuƒlelawo ateŋu atsɔ ŋutilã me kpɔɖeŋuwo, agbalẽvi siwo li xoxo alo kpɔɖeŋu ƒe susuwo aɖo ɖa hena mɔ̃ɖaŋununya ƒe dodokpɔ ne matte alo seda ƒe nuwuwu si wozãna ɖaa meɖo dɔa ƒe nudidi gbɔ o.
Kpɔɖeŋu lamination ɖea mɔ na nuƒlelawo be woaɖo kpe kpɔɖeŋu ƒe asitɔtrɔ, kaɖi ƒe asiɖeɖe le eŋu, anyigba ƒe nyonyome kple ɖekawɔwɔ kple wɔwɔ ƒe ɖoɖo siwo li fifia dzi.
Wallis doa alɔ kaɖi dɔwɔƒewo, RFID wɔlawo, kaɖi-nuawo mamalawo kple B2B asisi bubu siwo hiã be woagbugbɔ awɔ kpɔɖeŋu, didime kple nubablɛ ƒe nɔnɔmewo.
Wallis wɔa dɔ kple dukɔwo dome kaɖi wɔlawo, nuwo mamalawo kple smart-card wɔwɔ dɔwɔƒewo siwo naa kaɖi ƒe nuzazãwo kple lamination accessories na ewɔwɔ ƒe nudidi vovovowo.
Asitsalawo ƒe nyaŋuɖoɖo naa nyatakaka bubuwo tso subɔsubɔdɔa kple nuƒle ŋuti nuteƒekpɔkpɔ ŋu. Le mɔ̃ɖaŋununya ƒe mɔɖeɖe ta la, ele kokoko be nuƒlelawo nadze na patterned lamination plates to dimensional inspection, surface comparison kple card-lamination dodokpɔ ŋutɔŋutɔwo zazã me.
Enye gakpo si mexɔ dzo o ƒe laminator gbadzɛ si ƒe akpa si dzi wokpɔna si ƒe nɔnɔme le si trɔa nɔnɔme ŋutɔŋutɔ aɖe ɖe PVC , PETG , PC alo plastic card ƒe anyigba bubu si sɔ dzi le hot-press lamination me.
Ao, zi geɖe la, wozãa gakpo si mexɔ dzo o si wotsɔ xɔtuɖaŋu wɔe abe atsyɔ̃ɖonu si wowu enu ene. Adzɔnu sia nye dɔwɔnu si woate ŋu azã ake si wozãna le kaɖi ƒe laminator me tsɔ wɔa nuŋɔŋlɔ ɖe plastik kaɖiwo dzi.
Wallis ƒe kaɖi-lamination gakpo gbadzɛ ƒe hatsotso koŋ lɔ 0.6 mm, 0.8 mm kple 1.0 mm. Ele be woatsɔ nudidi bubuwo aɖo ɖa be woaɖo kpe wo dzi le mɔ̃ɖaŋununya me.
Woate ŋu ada agbalẽvi bubuwo ƒe titrime kpɔ na laminator ƒe nɔnɔme tɔxɛwo, gake 0.6 mm, 0.8 mm kple 1.0 mm ye nye tiatia vevitɔ siwo ŋu woƒo nu tsoe na kaɖi-lamination nuwɔna sia. Kpe ɖe eƒe titrime bubu ɖesiaɖe dzi hafi nàbia.
Ɛ̃. Woate ŋu ato A3, A4 kple kaɖi-lamination plate ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu me. Wokafu milimeta ƒe didime pɛpɛpɛ elabena mɔ̃wo ƒe nɔnɔme ate ŋu ato vovo le laminator wɔlawo dome.
Ɛ̃. Na wò agbalẽvi si li xoxo alo laminator ƒe kpɔɖeŋu kple dɔwɔwɔ ƒe didime ƒe didime, kekeme kple titrime pɛpɛpɛ.
Woate ŋu ada nuŋɔŋlɔ siwo wowɔ ɖe ɖoɖo nu la kpɔ le kpɔɖeŋu ƒe sesẽme, gbugbɔgagblɔ ƒe didime, goglome kple dɔwɔnu ƒe ŋutete nu. Wokafui be woawɔ nufiame ŋutɔŋutɔ alo aɖaŋunuwɔwɔ ƒe faɛl.
Tiatia ate ŋu anye matte, seda, aklala, nuku, ati, grid, wave, diamond kple nuŋɔŋlɔ bubu siwo wowɔ ɖe ɖoɖo nu, le ewɔwɔ ƒe ŋutete kple kpɔɖeŋu ƒe mɔɖeɖe nu.
Woate ŋu ada agbalẽvi siwo ƒe nɔnɔmetata le axa eve la akpɔ. Kpɔe ɖa be akpa evea siaa hiã nɔnɔmetata ɖeka, nɔnɔme vovovo eve alo nɔnɔmetata kple nu bubu siwo wotsɔ wu enu ƒe ƒuƒoƒo.
Ɛ̃. PVC kaɖi wɔwɔ nye dɔwɔwɔ veviwo dometɔ ɖeka na special-pattern lamination plates. Do agbalẽvi la kpɔ kple Overlay film , agbalẽtata kple lamination ƒe ɖoɖo siwo woɖo hafi woawɔe le agbɔsɔsɔ gã me.
Woateŋu atsɔ PETG kaɖi ƒe wɔwɔmewo ada agbalẽvi siwo sɔ la kpɔ. Esi PETG dɔwɔwɔ ƒe nɔnɔmewo ateŋu ato vovo tso PVC gbɔ ta la, ele be woado anyigba mamlɛtɔa kpɔ to PETG nu ŋutɔŋutɔwo zazã me.
Wallis ŋlɔ PC ɖe kaɖi ƒe nu siwo sɔ dome na eƒe lamination plate ƒe hatsotso. Ele be woaɖo kpe agbalẽvi ƒe nɔnɔmetata dzi le dzoxɔxɔ, nyaƒoɖeamenu kple fafa ƒe nɔnɔme siwo wozã na PC xɔtutu si woɖo be woawɔ la nu.
Woateŋu azã seda kple textured plate xɔtutu tiatia aɖewo na RFID inlay alo prelam sheet dɔwɔwɔwo. Ele be woatsɔ nyaƒoɖeamenu kple cushion ƒe ɖoɖo asɔ kple inlay kple antenna ƒe nɔnɔme.
Zi geɖe la, kpɔɖeŋua doa ka kple kaɖia Overlay film alo gotagome ƒuƒoƒoa tsɔ wu be wòaŋlɔ nuŋlɔtsi si wota la tẽ. Nusiwo do tso eme mamlɛawo nɔ te ɖe kaɖi ƒe wɔwɔme bliboa, Overlay film ƒe titrime, kpɔɖeŋu ƒe goglome kple lamination ƒe nuɖaɖa dzi.
Ao, ele be nɔnɔmetata ƒe goglome nasɔ kple nukpɔkpɔ si woɖo be wòawɔ kple plastik-nu. Nuŋɔŋlɔ si sesẽ akpa ate ŋu atrɔ alesi wotae alo awɔ anyigba si mesɔ na ame ŋutɔ ƒe nɔnɔme si le anyime o.
Nusiwo sɔ kple inkjet, dzoxɔxɔ ƒe asitɔtrɔ, amadede sublimation, laser engraving alo ame ŋutɔ ƒe nɔnɔmetata bubuwo nɔ te ɖe anyigba ƒe nɔnɔme kple kaɖi ƒe wɔwɔme dzi. Do ame ŋutɔ ƒe nɔnɔme si nèdi be yeawɔ la kpɔ le kaɖi si wotsɔ laminated wɔ vɔ la dzi.
Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, dzadzɛnyenye, anyigba ƒe vuvu, nudzraɖoƒe kple eŋudɔwɔwɔ dzi. Ne atikeawo ƒe nɔnɔme kple lɔlɔ̃ ɖe edzi ƒe dzidzenu siwo sɔ da asi ɖe edzi ko hafi wòle be woagblɔ ɣeyiɣi si woɖo ɖi ƒe agbenɔƒe.
Zã dzadzɛnyenyemɔnu si sɔ kple gakpo si mexɔ dzo o kple eƒe nɔnɔme. Ƒo asa na abrasive polishing si ate ŋu atrɔ nɔnɔme si dzi wokpɔna, eye nàɖe nu suesuesuewo ɖa le do nyuiwo me hafi nàgazãe ake.
Woate ŋu agblɔ ametakpɔnu film be wòaɖe anyigba ƒe ʋuʋu kple ɖiƒoƒo dzi akpɔtɔ le etsɔtsɔ me. Ðo kpe ametakpɔnu-film ƒe wɔwɔme si hiã dzi ne èle ga home biam.
Wokafua kpɔɖeŋu dodokpɔ, vevietɔ na nuŋɔŋlɔ siwo wowɔ ɖe ɖoɖo nu. Zã kpɔɖeŋu gbadzɛ si me kaɖi ƒe nu ŋutɔŋutɔwo kple laminator le tsɔ da asi ɖe kpɔɖeŋu ƒe asitɔtrɔ kple anyigba ƒe nyonyome dzi.
MOQ nɔ te ɖe agbalẽvi ƒe lolome, nɔnɔme, titrime, nenye be dɔwɔnu yeyewo hiã kple tɔtrɔ bliboe dzi. Ðo kpe MOQ si sɔ dzi na ewɔwɔ kple kpɔɖeŋu ƒe nudɔdɔ siwo sɔ hafi nàwɔ nudɔdɔa.
Ɣeyiɣi si woatsɔ awɔ dɔe nɔ te ɖe nenye be kpɔɖeŋua li alo esi wowɔ yeyee, agbalẽvi ƒe didime, agbɔsɔsɔme kple ewɔwɔ ƒe ɖoɖowɔɖi dzi. Woyɔa ɣeyiɣi mamlɛtɔ ne woda asi ɖe nɔnɔme si woɖo ɖi dzi vɔ.
Na agbalẽvi ƒe didime, kekeme, titrime, kpɔɖeŋu si hiã alo nufiame kpɔɖeŋu, axa ɖeka alo eve ƒe nuwuwu, laminator ƒe kpɔɖeŋu, kaɖi ƒe nu, dɔwɔwɔ ƒe nɔnɔmewo, agbɔsɔsɔme, nugbɔ ƒe nudidiwo, babla kple teƒe si woatsɔe ayi.
Èle kaɖi lamination gakpo gbadzɛ wɔla si ŋu kakaɖedzi le si ŋu kakaɖedzi le si wowɔ ɖe ɖoɖo nu dim na PVC , PETG } , PC , RFID alo ame ŋutɔ ƒe kaɖi wɔwɔ? Ðo Wallis wò agbalẽvi ƒe didimewo, titrime, nɔnɔme ƒe kpɔɖeŋu, laminator ƒe kpɔɖeŋu, kaɖi ƒe nu kple nudɔdɔ ƒe agbɔsɔsɔ hena mɔ̃ɖaŋununya me dzodzro, kpɔɖeŋu kple dɔwɔƒe-tsã ƒe asixɔxɔ.
