|
silikon-nulénu si wotsɔna ƒoa nu
Wallis ye nye esia
| Agbɔsɔsɔ: | |
|---|---|
| Nusi wotsɔ wɔe: | |
| viɖe: | |
| Dɔwɔwɔ: | |
| Agbɔsɔsɔ: | |
Wallis wool silicone press pad for card lamination nye dzoxɔxɔ-tsitretsitsi cushioning nusi wowɔ na dɔwɔƒewo hot-press wɔwɔ PVC , PETG kple polycarbonate kaɖiwo. Fifia ƒe xɔtutua tsɔa silicone si te ŋu nɔa te ɖe dzoxɔxɔ nu kple alẽfu si wotsɔ lãfu wɔe si wotsɔ ƒoa lãe nu ƒu tsɔ doa alɔ nyaƒoɖeamenu mama si dzi wokpɔna le kaɖi ƒe lamination ƒe tsatsam enuenu me.
Available in 3mm, 5mm, 8mm and 10mm thicknesses , kple didime siwo wowɔ ɖe ɖoɖo nu, kpekpeme kple nɔnɔmewo, woate ŋu atsɔ pad la asɔ kple lamination plate vovovowo, card-sheet formats kple press configurations. Wallis ƒe nɔnɔme si li fifia ɖɔ dzoxɔxɔ ƒe tsitretsitsi vaseɖe abe 180°C ene na PVC , PETG kple PC kaɖi-lamination nɔnɔme siwo bɔ.
Dɔwɔwɔ siwo bɔ dometɔ aɖewoe nye gadzraɖoƒegbalẽviwo, ID gbalẽviwo, hamevinyenye ƒe agbalẽviwo, smart cardwo, kadodomanɔmee ƒe kaɖiwo, plastic kaɖi siwo le ƒuƒoƒo geɖe me kple Overlay film -film lamination. Alesi wotsɔa lãfu wɔe si wotsɔa lãfu wɔe la na be atike sia to vovo tso Wallis ƒe silicone ɖeɖeko kple silicone-fiberglass press-pad nuwɔna gbɔ.
Le dɔnyala B2B tiatia gome la, ele be nuƒlelawo nana laminator ƒe kpɔɖeŋu, dzoxɔxɔ-plate ƒe didime, fifia pad ƒe titrime, kaɖi nu, dzoxɔxɔ-press dzoxɔxɔ, nyaƒoɖeamenu, nɔƒe ɣeyiɣi, fafa nɔnɔmewo kple mɔkpɔkpɔ be ewɔwɔ ƒe tsatsam. Ele be woada nɔnɔme siawo kpɔ ɖekae tsɔ wu be woatia pad aɖe le eƒe titrime ko nu.
| Specification / Attribute | Standard / Tiatia si wowɔ ɖe ɖoɖo nu |
|---|---|
| Pad Nusiwo Wotsɔ Wɔe | Silicone + alẽfu si wotsɔa lãfu wɔe si te ŋu nɔa te ɖe dzoxɔxɔ nu ƒe gɔmeɖoanyi |
| Dzoxɔxɔ ƒe Tsitretsitsi | Esɔ na PVC , PETG kple PC kaɖi ƒe lamination ƒe dzoxɔxɔ tɔxɛwo — wogblɔ fifia be ade 180°C |
| Tiatiawɔblɔɖe ƒe Titrime | 3mm / 5mm / 8mm / 10mm ƒe didime; custom thickness li li le nudɔdɔ ɖesiaɖe me |
| Pad ƒe Agbɔsɔsɔme / Dzidzemewo | Wotrɔ asi le eŋu be wòasɔ ɖe lamination plate ƒe didime nu; OEM / ODM wodo alɔe |
| Nyaƒoɖeamenu ƒe Mama | Wotrɔ asi le eŋu be wòado alɔ nyaƒoɖeamenu mama si sɔ wu le pad si woate ŋu azã la ƒe anyigba dzi |
| Anyigba ƒe Kadodo | Silicone ƒe anyigba gbadza si woɖɔ be menye abrasive na card Overlay film s |
| Nusiwo nɔa anyi didina / Agbenɔƒe | Woate ŋu azãe ake na lamination cycles enuenu le dɔwɔwɔ kple beléle na nɔnɔme siwo sɔ me; wometa tsikpe ƒe agbenɔƒe tututu fifia o |
| Nugbɔ / Nɔnɔme | Dzogoe ene me alo esi wotso ɖe ɖoɖo nu be wòasɔ kple lamination plate la |
| Nudɔdɔ ƒe Agbɔsɔsɔ / MOQ | Axa si li fifia ƒo nu tso nudɔdɔ siwo te ŋu trɔna bɔbɔe le hatsotso suewo kple agbɔsɔsɔ gã me ŋu; ɖo kpe MOQ tututu dzi na nɔnɔme si nètia |
| Trɔ asi le eŋu & OEM / ODM | Trɔ asi le lolome, titrime, kpekpeme kple nɔnɔme le laminator nudidiwo nu |
Mɔ̃ɖaŋu ŋuti numekɔkɔ: Wallis ƒe adzɔnuwo ƒe nɔnɔme si li fifia ɖɔ pad sia be enye silicone si te ŋu nɔa te ɖe dzoxɔxɔ nu si wotsɔ ƒo ƒu kple alẽfu si wotsɔ lãfu wɔe ƒe gɔmeɖoanyi, gake meta alẽfu ƒe agbɔsɔsɔ si tututu, lãfu ƒe kpekpeme, silicone ƒe sesẽ, ƒuƒoƒo ƒe ɖoɖo tsitotsito, titrime dzi ɖuɖu, nutete gbugbɔgaxɔ alo asixɔxɔ si woɖo ɖe nutete te ɖaa o. Ele be nuƒlela siwo bia parameter siawo nabia mɔ̃ɖaŋununya ŋuti nyatakaka siwo ku ɖe model-koŋ ŋu.
Dzoxɔxɔ ƒe numekɔkɔ: anɔ abe 180°C ene ye nye asixɔxɔ si wota fifia na Wallis ƒe atike sia. Mègatsɔ hoʋlila aɖe ƒe 200°C alo 250°C ƒe nɔnɔmetata aɖɔlii o negbe ɖe dodokpɔ ŋuti nyatakaka siwo ɖo kpe xɔtutu sia tututu ƒe dzeside si kɔ wu dzi le Wallis si hafi.
Wool silicone card lamination pad nye hot-press cushion si sɔ ɖe se nu si wozãna le plastic-card press ƒe lamination stack me. Etsɔa silicone ƒe dzoxɔxɔ si te ŋu nɔa te ɖe dzoxɔxɔ nu kple alẽfu si wotsɔ lãfu wɔe ƒe cushioning nɔnɔmewo tsakana be wòakpe ɖe eŋu wòawɔ ɖe vovototo suesuesue siwo le card-stack ƒe titrime kple press nɔnɔmewo me dzi.
Silicone naa dzoxɔxɔ si te ŋu nɔa te ɖe elastomeric nu si le pad la me. Eƒe sesẽme, eƒe titrime kple eƒe nutete ƒe nɔnɔmewo kpɔa ŋusẽ ɖe alesi pad la wɔa nui le lamination ƒe nyaƒoɖeamenu me dzi.
Wool felt tsɔa avɔ si wotu ɖe akɔtaɖonu dzi kpena ɖe eŋu si ate ŋu ana mɔ̃ɖaŋununya nawɔ nu fafɛ wu silicone-tu aɖewo siwo ŋu wodo ŋusẽe. Eyata ele be woabu seselelãme ƒe ʋeʋẽ, tsi ƒe nɔnɔme kple ɣeyiɣi didi ƒe nutete ŋu le ewɔwɔ me.
Woɖoe be nuwo ƒokpli la nakpe ɖe wo ŋu woama agbalẽtamɔ̃ ƒe agba ɖe kaɖia ƒe ƒuƒoƒoa dzi esime wòle vovototo suesuesue siwo le nutoa me ƒe titrime ŋu wɔm. Ele be woabui be enye lamination ƒe nuɖaɖa bliboa ƒe akpa ɖeka tsɔ wu be wòanye egbɔkpɔnu si le eɖokui si na kaɖi ƒe gbagbã ɖesiaɖe.
Cushion si me felt le ate ŋu ana mɔ̃ɖaŋununya nawɔ nu wòafa wu silicone pad si sesẽ alo esi ŋu wodo ŋusẽe vevie wu. Esia ateŋu aɖe vi ne lamination stack la hiã fexexe bubu ɖe teƒea ƒe tɔtrɔ suewo ta.
Felt ƒe titrime kple eƒe kpekpeme ate ŋu akpɔ ŋusẽ ɖe alesi dzoxɔxɔ toa lamination stack bliboa me kabakabae dzi. Eyata ne wole tɔtrɔm tso pad bubu tutu dzi yi alẽfu-silicone pad dzi la, ele be woagbugbɔ aɖo kpe dzoxɔxɔ kple fafa ƒe mɔnu si li fifia dzi.
Nusiwo wotsɔ avɔ wɔe ate ŋu awɔ nu ɖe nudzraɖoƒe ƒe fafa ŋu le mɔ bubu nu wu silicon sesẽ. Na pad la naƒu eye wòanɔ dzadzɛ, vevietɔ le afisiwo wozãa kaɖi ƒe nu siwo te ŋu xɔa tsi, ink alo Overlay film s le.
Ka ɖesiaɖe si le gbadzaa, ke alo ɖiƒoƒo si le lamination stack la me ateŋu awɔ dzesi siwo woateŋu akpɔ. Lé ŋku ɖe felt ƒe goawo kple nusiwo woɖe ɖe go ŋu edziedzi eye nàɖe aŋekotoku siwo me ɖi le ɖa le wo wɔwɔ me ne ehiã.
Hot-press card lamination ƒoa dzoxɔxɔ, mɔ̃ ƒe nyaƒoɖeamenu kple fafa si dzi wokpɔna nu ƒu. Cushion pad la nɔa ɖoɖo sia me eye wòkpena ɖe stack la ŋu wòwɔa nu ɖe didime ƒe vovototo sue siwo le ƒuƒoƒoawo dome ŋu.
Layer siwo wota, RFID inlays, elektrɔnik akpa siwo wotsɔ de eme kple kaɖi ƒe wɔwɔme bubuwo ateŋu ahe tɔtrɔ suesuesue siwo le titrime vɛ. Akɔtaɖonu si wɔ ɖeka ate ŋu akpe ɖe ame ŋu be woaɖe nyaƒoɖeamenu si le teƒe ɖeka ŋutɔ dzi akpɔtɔ.
Pad ƒe didime kple eƒe titrime siwo wotia nyuie kpena ɖe ame ŋu be kadodo nanɔ anyi ɖaa wu le nyatamɔ̃ si woate ŋu azã la katã me. Pad siwo lolo akpa, siwo woxatsa, siwo me ɖi le alo esiwo womiã ate ŋu akpɔ ŋusẽ gbegblẽ ɖe dɔwɔwɔ sia dzi.
Lamination ƒe gbɔdzɔgbɔdzɔwo ateŋu atso ya si xaxa, tsidzadza, solvent ƒe léle ɖe te, platen ƒe dzoxɔxɔ si mesɔ o, nyaƒoɖeamenu si mesɔ o, ink-film ƒe titrime, Overlay film chemistry, cooling rate alo plate parallelism nyuie o hã gbɔ. Eyata ele be woatia cushion pad be wòanye dɔ bliboa ƒe akpa aɖe.
Wallis ŋlɔ 3mm, 5mm, 8mm kple 10mm ƒe titrime tiatia fifia. Titrime kpɔa ŋusẽ ɖe compressed stack ƒe kɔkɔme, nyaƒoɖeamenu ƒe fexexe kple ate ŋu anye dzoxɔxɔ ƒe ŋuɖoɖo si le nyadzɔdzɔŋlɔlawo ƒe ƒuƒoƒoa me.
Woate ŋu ada 3mm ƒe xɔtutu kpɔ le afisi agbalẽtamɔ̃a hiã be woatsɔ alẽfu-silicone-kplu si le tsɛ vie alo afisiwo aŋenu si dzi woda asi ɖo si li fifia zãa eƒe titrime ma tɔgbe le.
5mm pad naa cushioning ƒe titrime bubuwo eye ele be woaɖo kpe edzi ɖe laminator ƒe ʋuʋu, nyaƒoɖeamenu ƒe ɖoɖo kple dzoxɔxɔ-trɔtrɔ ƒe nɔnɔmetata ŋu.
8mm pad ate ŋu ana layer si goglo wu si wɔ ɖeka, gake etrɔa lamination-stack ƒe kɔkɔme bliboa hã. Kpɔ mɔ̃a ƒe ʋuʋu kple dzoxɔxɔ ƒe nɔnɔmewo dzi hafi nàtsɔ 8mm ƒe akpa si le tsɛ wu aɖɔli.
Ele be woatia 10mm xɔtutu ne woɖo kpe edzi be laminator la ateŋu axɔ titrime si dzi ɖe edzi eye be dzoxɔxɔ kple nyaƒoɖeamenu ƒe nɔnɔme si hiã la gakpɔtɔ nye nusi woateŋu aɖo vɔ ko.
Woate ŋu alé ŋku ɖe eƒe titrime si wowɔ ɖe ɖoɖo nu ŋu hena kaɖiwo ƒe agbalẽtamɔ̃ tɔxɛwo. Cushion ƒe kpɔɖeŋu si dzi woda asi ɖo xoxo alo nutata tsitotsito nana kpena ɖe ame ŋu be woaɖe vodada siwo le replacement-pad tiatia me dzi akpɔtɔ.
Wallis ƒe nɔnɔme si li fifia gblɔ be alẽfu silicone pad la sɔ na PVC , PETG kple PC kaɖi ƒe lamination ƒe dzoxɔxɔ tɔxɛ siwo ade 180°C.
Ele be nuƒlelawo nade vovototo dzoxɔxɔ si nɔa dɔ wɔm ɖaa kple dzoxɔxɔ si nu sẽ wu ɣeyiɣi kpui aɖe dome. Axa si li fifia metaa dzidzedzekpɔkpɔ vovovowo na nɔnɔme eve siawo o.
Dzoxɔxɔ aɖe si woɖo ɖi me aɖabaƒoƒo geɖe ate ŋu akpɔ ŋusẽ ɖe pad dzi le mɔ bubu nu wu alesi wòka asi eŋu kpuie. De hot-press dwell time kple cycle frequency ne èle mɔ̃ɖaŋununya ƒe kpeɖodzi biam.
Polycarbonate card lamination ate ŋu azã dzoxɔxɔ ƒe tsatsam siwo bia nu geɖe. Ne wò dɔwɔwɔ ŋutɔŋutɔ gogo alo wu dzoxɔxɔ ƒe seɖoƒe si wota fifia la, ɖo kpe ɖekawɔwɔ dzi hafi nàbia tsɔ wu be nàɖo ŋu ɖe PC dɔwɔwɔ ƒe nyagbɔgblɔ si wozãna le mɔ gbadza nu ɖeɖeko ŋu.
Silicone ƒe sesẽ kpɔa ŋusẽ ɖe deformation dzi le agbalẽtamɔ̃ ƒe agba te. Wallis ƒe axa si li fifia gblɔ be woateŋu atrɔ asi le density ŋu gake meta Shore A ƒe sesẽme ƒe asixɔxɔ tɔxɛ aɖeke na wool-silicone ƒe kpɔɖeŋu sia o.
Felt density kpɔa ŋusẽ ɖe cushioning, compression kple dzoxɔxɔ ƒe nuwɔna dzi. Ne nuƒlela aɖe le felt-silicone pad si li xoxo ɖɔlim la, ele be woatsɔ eƒe kpekpeme asɔ kple eƒe titrime kple eƒe sesẽme.
Le hot-press tsatsam enuenu megbe la, eƒe titrime ƒe bu tegbee ate ŋu aɖe cushioning ƒe dɔwɔwɔ dzi akpɔtɔ. Ele be Wallis natsɔ compression-set alo thickness-loss specification si wodzidze akpe ɖe eŋu ne ele.
Gahaya le nyadzɔdzɔŋlɔlawo ƒe tsatsam ɖesiaɖe megbe kpɔa ŋusẽ ɖe alesi woate ŋu agbugbɔe awɔ ɣeyiɣi didi dzi. Ele be kaɖi siwo ƒe lolome lolo ŋutɔ wɔlawo nabia nyatakaka siwo sɔ tso wo gbugbɔgaxɔ ŋu alo woawɔ wo wɔwɔ ƒe dodokpɔ ŋutɔŋutɔ.
Woateŋu azã lãfu silicone pads le hot-press lamination of printed PVC cores kple PVC Overlay film s na ID cards, hamevinyenye gbalẽviwo, gadzraɖoƒegbalẽviwo kple plastic-card nu bubuwo.
PETG kaɖi ƒe xɔtuɖoɖowo ateŋu azã alẽfu-silikon ƒe akɔtaɖonu si sɔ hã. Ele be woaɖo kpe dzoxɔxɔ, nyaƒoɖeamenu kple fafa ƒe ɖoɖowo dzi kple PETG ƒe wɔwɔme ŋutɔŋutɔ kple kaɖi ƒe ƒuƒoƒo.
PC kaɖi wɔwɔ bia dzoxɔxɔ ƒe dɔwɔwɔ si dzi wokpɔna. Kpe ɖe nyadzɔdzɔgbalẽ ƒe dzoxɔxɔ ŋutɔŋutɔ dzi le fifia si ade 180°C Wallis ƒe dzeside nu hafi nàzã ewɔwɔ.
Contactless-card kple RFID agbalẽwo ateŋu anye antennas, inlays kple teƒea ƒe xɔtuɖoɖo ƒe tɔtrɔ. Cushion si wɔ ɖeka ate ŋu akpe ɖe ame ŋu wòawɔ ɖe vovototo suesuesue siwo le titrime dzi le lamination ƒe tsatsam me.
Wallis ƒe axa si li fifia hã yɔ Overlay film -film lamination abe dɔwɔwɔ ene. Kpe ɖe stack ƒe ɖoɖo si tututu wowɔ kple pad la ƒe akpa si do ka kple plate alo release layer la dzi.
Multi-layer card structures ateŋu akpɔ viɖe tso cushioning si dzi wokpɔna me afisi lamination cycles enuenu bia be woama nyaƒoɖeamenu ɣesiaɣi.
| Pad Ƒomevi | General Construction | Safui Tiatia Teƒewo |
|---|---|---|
| Wool Silicone Nyadzɔdzɔdɔwɔƒe | Silicone si wotsɔ kpe ɖe alẽfu ŋu la wɔa nuvevi ame | Felt ƒe ʋeʋẽ, tsidzadza, lint, compression recovery, titrime kple dzoxɔxɔ |
| Silicone ƒe Nyadzɔdzɔdɔwɔƒe | Silicone-based pad si me alẽfu-felt ƒe xɔtutu si ŋu woƒo nu tsoe le axa sia mele o | Sesẽme, titrime, dzoxɔxɔ, nutete ƒe nuwɔna kple anyigba ƒe nɔnɔme |
| Silicone-Fiberglass ƒe Kplɔ̃ɖoƒe | Silicone si me wotsɔa fiberglass doa ŋusẽe | Ŋusẽdodo ƒe blibonyenye, titrime, sesẽme, anyigba ƒe nɔnɔme kple dzoxɔxɔ ƒe ŋuɖoɖo |
press-pad xɔtutu nyuitɔ kekeake aɖeke mele xexeame katã na laminator ɖesiaɖe o. Tsɔ candidate pads sɔ kple wo nɔewo to gakpo gbadzɛwo, kaɖi ƒe ƒuƒoƒo, dzoxɔxɔ, nyaƒoɖeamenu, dzoxɔxɔ ƒe ɣeyiɣi kple fafa ƒe ɖoɖo si wozãna le wò nuwɔwɔ ƒe mɔ̃a me la ke zazã me.
Na laminator wɔla, eƒe nɔnɔme kple eƒe ɖoɖo ne ele. Pad ƒe nɔnɔme alo foto siwo li xoxo hã ate ŋu akpe ɖe ame ŋu woade dzesi xɔtutu si hiã.
Na dzoxɔxɔ-gbadzɛ alo kasɛt ƒe didime kple kekeme, si me do ɖesiaɖe si woatsɔ aɖo teƒe, dzogoe ƒe didime, lãɖeɖe alo ʋuʋu ƒe nudidiwo hã le.
Ne èle pad si li xoxo ɖɔlim la, dzidze eƒe nɔnɔme gbãtɔ ne wonya tsɔ wu be nàdzidze pad si wozã si womiã vevie ko.
Tsɔ PVC , PETG , PC alo nu bubu eye nàde dzesi Overlay film , inlay alo ƒuƒoƒo tɔxɛwo le lamination stack la me.
Gblɔ dzoxɔxɔ si sɔ le dɔwɔwɔ me, dzoxɔxɔ si sɔ gbɔ wu, nyaƒoɖeamenu ƒe nyaƒoɖeamenu kple dzoxɔxɔ si nɔa anyi.
Ne èle pad ɖɔlim le nusiwo gblẽ ta la, ɖɔ kuxia ŋutɔŋutɔ abe nyaƒoɖeamenu ƒe dzesiwo, lamination si mesɔ o, pad ƒe nutete, ɖiƒoƒo alo eɖɔliɖɔli si gbɔ eme ene.
Do candidate pad la kpɔ kple production stack ŋutɔŋutɔ hafi nàtrɔ specification la to production line blibo dzi.
Ke, ink ƒe nugbagbevi siwo susɔ, adhesive alo card kakɛwo ate ŋu ava zu nyaƒoɖeamenu teƒewo le lamination me. Dzro pad la me eye nàkɔ eŋu le beléle na eƒe ɖoɖo si dzi woda asi ɖo nu.
Dzra pad la ɖo ɖe teƒe ƒuƒui eye nàƒo asa na tsidzadza si dzi womeɖu o, vevietɔ hafi nànya nutata si ƒe dzoxɔxɔ lolo.
Dzra agbalẽ gãwo ɖo gbadzaa le afisi wòanya wɔ le be nàɖe woƒe bɔbɔ, wo babla alo woƒe teƒeteƒewo ƒe tɔtrɔ si mèdi o dzi akpɔtɔ.
Trɔ alo nàgbugbɔ ada asɔ kple pads siwo ɖea nutete tegbee si gbɔ eme, felt si gblẽ, ɖiƒoƒo le anyigba dzi, silicone si sesẽ, nugbɔ ƒe gbegblẽ alo lamination ƒe dɔwɔwɔ si mewɔ ɖeka o.
Wallis ƒe axa si li fifia metaa lamination cycles ƒe xexlẽme si ŋu kakaɖedzi le o. Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si woanɔ anyi, nudzraɖoƒe, dzadzɛnyenye kple pad ƒe nɔnɔme dzi.
Wowu didime kple kekeme nu
Pad ƒe titrime
Titrime ƒe ɖekawɔwɔ le agbalẽa katã dzi
Nusi le gbadzaa
Cut-edge nɔnɔme nyui
Silicone ƒe anyigba ƒe nɔnɔme
Wool se le eɖokui me be nɔnɔme aɖe le ye ŋu
Layer bonding le afisi wòsɔ le
Ðiƒoƒo si woate ŋu akpɔ
Ka siwo me mekɔ o alo lãgbalẽ si gblẽ
Sesẽ alo ʋeʋẽ le afisi wogblɔe le
Dzoxɔxɔ-tsitretsitsi ƒe nudidi
Compression nuwɔna le afisi wogblɔe le
Do alo esiwo wotso ɖe ɖoɖo nu
Agbɔsɔsɔ kple nusiwo wobla ɖe wo ŋu
Ele be woalé ŋku ɖe eƒe titrime ŋu le teƒe geɖe le pad gãwo dzi ne didime ƒe ɖekawɔwɔ le vevie na dɔwɔwɔ.
Ele be woalé ŋku ɖe felt ƒe anyigba kple goawo ŋu be ɖiƒoƒo, nusiwo le gbadzaa alo nusiwo ate ŋu age ɖe lamination stack la me hã.
Dimensional inspection ɖeɖe mate ŋu aɖe dɔwɔwɔ ƒe ɖekawɔwɔ blibo afia o. Production-card dodokpɔ gakpɔtɔ nye kpeɖodzi mamlɛtɔ si ŋu viɖe le wu.
Woate ŋu atso padwo le lamination plate alo cassette ƒe didime si nuƒlela la na nu.
Woŋlɔ 3mm, 5mm, 8mm kple 10mm ƒe tiatia siwo wozãna ɖaa fifia, esime woate ŋu ato eƒe titrime bubuwo me le dɔa ƒe nudidiwo nu.
Wallis ƒe axa si li fifia gblɔ be woate ŋu atrɔ asi le density ŋu. Ne density alo hardness nye dɔwɔwɔ-vevie la, ɖe dzidzenu si wobia si woate ŋu adzidze le nuƒle ƒe nɔnɔmetata me.
Woate ŋu ato dzogoe ene me pads kple nɔnɔme siwo wotso ɖe ɖoɖo nu me na mɔ̃ siwo hiã dzogoe, do alo teƒe tɔxɛwo.
Wallis naa nusiwo wotsɔ wɔa kaɖiwo kple nusiwo wozãna tsɔ wɔa kaɖiwo na dukɔwo dome kaɖiwɔlawo. Nuƒlelawo ate ŋu aƒo mɔ̃ɖaŋununya ƒe nɔnɔmetatawo, pad ƒe kpɔɖeŋu siwo li xoxo kple ewɔwɔ ƒe nɔnɔmewo nu ƒu ne wole biabiam be woaɖɔli alo woatrɔ asi le wool-silicone press pads ŋu.
Le B2B nudɔdɔwo gome la, dɔwɔwɔ ŋuti nyaŋuɖoɖo ɖea vi wu ne elɔ kaɖia ƒe nu, laminator ƒe kpɔɖeŋu, pad ƒe titrime, nyaƒoɖeamenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple tsatsam siwo wowu enu ƒe xexlẽme ɖe eme. Nyatakaka siawo kpena ɖe ame ŋu be woɖea adzɔnuwo ƒe dɔwɔwɔ ɖa tso vovototo siwo le dɔwɔwɔ ƒe nɔnɔmewo me gbɔ.
Ele be woakpɔ alẽfu silicone pads ta tso tsidzadza, ɖiƒoƒo, babla, nugbɔ ƒe gbegblẽ kple nutete fũu akpa le wo dzadzraɖo kple dukɔwo dome ʋuɖoɖo me.
Ele be woabla aŋekotoku gãwo gbadzaa le afisi wòanya wɔ le be woaɖe woƒe nɔnɔme gbegblẽ dzi akpɔtɔ hafi woaɖo wo ɖe wo me.
Ne woblae nyuie ate ŋu akpe ɖe eŋu be alẽfu ƒe akpa si wotsɔ lãfu wɔe la naƒu le edzadzraɖo kple dukɔwo dome etsɔtsɔ yi teƒe bubuwo me.
Na ke, nu ɖaɖɛwo kple nusiwo wotsɔna ƒoa nu nate ɖa le silicone la ƒe anyime be woaɖe afɔku si le nusiwo gblẽ le wo ŋu me le lamination zazã emegbe me dzi akpɔtɔ.
Enye akɔtaɖonu si te ŋu nɔa te ɖe dzoxɔxɔ nu si wozãna le hot-press plastic-card lamination me. Wallis ƒe nuwɔna si li fifia tsɔa silicone kple alẽfu si wotsɔ lãfu wɔe ƒe gɔmeɖoanyi tsakana be wòana dzoxɔxɔ nate ŋu anɔ te ɖe dzoxɔxɔ nu eye wòana mɔ̃wo natsi tre ɖe eŋu.
Wallis ƒe nɔnɔme si li fifia ƒo nu tso silicone si te ŋu nɔa te ɖe dzoxɔxɔ nu si wotsɔ lãfu si wotsɔ lãfu wɔe ƒe gɔmeɖoanyi ŋu. Wometa layer ƒe ɖoɖo nyuitɔ kple nusiwo wotsɔ wɔe ɖe axa si li fifia dzi o.
Fifia ƒe adzɔnuwo ƒe kplɔ̃ gblɔ alesi wòsɔ na PVC , PETG kple PC kaɖi ƒe lamination ƒe dzoxɔxɔ tɔxɛwo vaseɖe abe 180°C ene. Ðo kpe dɔwɔwɔ ƒe nɔnɔme ŋutɔŋutɔ siwo yia edzi kple esiwo de ŋgɔ wu dzi hafi nàbia nu.
Ɛ̃. Woŋlɔ titrime ene siawo fifia, eye woate ŋu aƒo nu tso titrime si wowɔ ɖe ɖoɖo nu hã ŋu.
Tiatia nɔ te ɖe laminator, plate clearance, pad si dzi woda asi ɖo si li xoxo, card stack, sesẽ, dzoxɔxɔ kple nyaƒoɖeamenu dzi. Pad si le kpekpem wu la menyona le eɖokui si o.
Ɛ̃. Wallis doa alɔ didime, kekeme kple nɔnɔme siwo wowɔ ɖe ɖoɖo nu le lamination-plate ƒe nudidiwo nu.
Axa si li la gblɔ be woate ŋu atrɔ asi le density ŋu. Ele be nuƒlelawo nagblɔ taɖodzinu si woate ŋu adzidze ne kpekpeme alo sesẽme le vevie ŋutɔ le dɔwɔwɔ me.
Wometa Shore A ƒe sesẽme tɔxɛ aɖe na Wallis ƒe lãfu-silicone-kplu si li fifia o. Bia asixɔxɔ si sɔ na xɔtuɖoɖo si nètia ne ehiã be wòasesẽ le wò mɔ̃ɖaŋununya ƒe nɔnɔmetata me.
Ɛ̃. PVC card lamination nye dɔ vevi siwo Wallis yɔ la dometɔ ɖeka.
Ɛ̃. PETG hã le dɔwɔwɔ ƒe didime si li fifia me. Da kpe pad la dzi kple PETG lamination nuɖaɖa ŋutɔŋutɔ.
PC woŋlɔ kaɖi ƒe lamination be enye dɔwɔwɔ, gake ele be dɔwɔwɔ ƒe dzoxɔxɔ ŋutɔŋutɔ nanɔ ɖekawɔwɔ me kple pad la ƒe mɔ̃ɖaŋununya ƒe seɖoƒewo.
Woateŋu adae kpɔ na RFID kple smart-card lamination afisi cushioning hiã be woawɔ ɖe teƒea ƒe titrime ƒe tɔtrɔ suewo dzi le card ƒe wɔwɔme me.
Ɛ̃. Overlay film -film lamination le Wallis ƒe dɔwɔwɔ ŋuti nyatakaka siwo li fifia me tẽ.
Wool-silicone-nulénu siwo wotsɔa lãfu wɔe ƒe akpa aɖe le eme, gake silicone-silicone ɖeɖeko mezãa lãfu-silicone ƒe wɔwɔme si ŋu woƒo nu tsoe le axa sia o. Eyata woƒe nyaƒoɖeamenu ƒe fexexe, dzoxɔxɔ ƒe tɔtrɔ ƒe nuwɔna kple beléle na wo ƒe nudidiwo ate ŋu ato vovo.
Silicone-fiberglass-kpluwo zãa fiberglass ƒe ŋusẽdoame, gake atike sia ya zãa alẽfu si wotsɔ lãfu wɔe abe eƒe akpa si naa akɔtaɖonu ene. Ele be woada xɔtuɖoɖo eveawo kpɔ ɖe vovo hena woƒe titrime, woƒe sesẽme, dzoxɔxɔ ƒe ŋuɖoɖo kple woƒe nutete.
Wallis ƒe axa si li fifia metaa tsikpe ƒe xexlẽme si ŋu kakaɖedzi le o. Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, tsatsam ƒe ɣeyiɣi, pad ƒe titrime, beléle na edzadzraɖo kple edzadzraɖo dzi.
Tsɔ pad la ɖɔ li alo nàdae kpɔ ne eɖee fia be wote ɖe edzi tegbee akpa, silicone si sesẽ alo gblẽ, felt si me ɖi le, ka siwo me mekɔ o, nugbɔ gblẽ alo lamination ƒe wɔwɔme si le ɖiɖim.
Na wòanɔ dzadzɛ, wòaƒu eye wòanɔ gbadzaa, wòate ɖa tso nu ɖaɖɛwo, ɖiƒoƒo, fafa si dzi womate ŋu aɖu o kple dzoxɔxɔ si gbɔ eme gbɔ ne mèle ezãm o.
Axa si li fifia ƒo nu tso nudɔdɔ si te ŋu trɔna bɔbɔe na agbɔsɔsɔ suewo kple agbɔsɔsɔ gãwo ŋu gake metaa MOQ ɖeka si woɖo ɖi o. Kpe ɖe MOQ si li fifia dzi le lolome, titrime kple nudidi siwo wowɔ ɖe ɖoɖo nu nu.
Na laminator ƒe kpɔɖeŋu, agbalẽvi ƒe didime, pad ƒe titrime, agbɔsɔsɔ si hiã, kaɖi ƒe nu, dzoxɔxɔ-nyaƒoɖeamenu ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si nɔa anyi, pad ƒe nɔnɔme si li, do alo nɔnɔme tɔxɛwo kple teƒe si woatsɔe ayi.
Le afisi wòanya wɔ le la, pad ƒe kpɔɖeŋu si dzi woda asi ɖo xoxo alo nɔnɔmetata si me woɖe tsitotsito ate ŋu akpe ɖe Wallis ŋu wòada eƒe didime, eƒe titrime kple xɔtutu akpɔ na nusi woatsɔ aɖɔlii.
Èle alẽfu silicone press pad wɔla si ŋu kakaɖedzi le dim na card lamination ? Ðo Wallis wò laminator ƒe kpɔɖeŋu, pad ƒe didime, titrime, dɔwɔwɔ ƒe dzoxɔxɔ, kaɖi ƒe nu kple agbɔsɔsɔme hena mɔ̃ɖaŋununya me toto, kpɔɖeŋu dodokpɔ kple B2B dɔwɔƒe ƒe asixɔxɔ.
