|
Laminashɔn Stiɛl Plɛt
Wallis we nem Wallis
| Material: | |
|---|---|
| Surface: | |
| advantej: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis kɔstɔm patɛn kad laminɛshɔn stɛl plet na prɛsishɔn stenlɛs stiɛl prɛs plet we dɛn mek fɔ transfa dɛkɔretiv, tɛkstɔr ɔ spɛshal sɔfa patɛn pan PVC , PETG , PC , ABS , RFID ɛn ɔda kɔmpitabl laminɛt kad shit dɛn we dɛn de prodyuz ɔt-prɛs.
Dis prodak nɔ tan lɛk ɔdinari dɛkɔretiv stenlɛs stiɛl sheet we dɛn kin yuz fɔ akitɔk kladin, dɛn mek dis prɔdak spɛshal wan as kad laminatɔ aksesɔri . Di patɛn stɛl sɔfays kɔntakt di ɔta kad layt we dɛn de lamin so di tɛkstɔr we dɛn dɔn pik kin riprodyuz pan di kad shit we dɔn bifo bifo dɛn panch, pɔsnalayz ɔ dɔŋstrim prɔsesin.
Wallis de sɔpɔt kɔstɔmayz patɛn, A3, A4 ɛn mashin-spɛsifi k plet dimɛnshɔn, bɔku plet tik ɛn difrɛn sɔfayz finish fɔ kad faktri, RFID inlay manifakta, smat-kad prodyusɔ ɛn kad-matirial distribyushɔn. Kɔrɛnt Wallis lamineshɔn plet spɛsifikɛshɔn dɛn fɔs inklud 0.6 mm, 0.8 mm ɛn 1.0 mm , wit ɔda spɛsifikɛshɔn dɛn we de ɔnda tɛknikal kɔnfɔmeshɔn.
| Spesifikasi | Wallis Opshɔn | Baya Kɔnfɔmeshɔn |
|---|---|---|
| Sɔntin | Kastom patern kad lamination stenles stiel plet | Gi di kad finish ɔ rɛfrɛns sampul we dɛn nid |
| Tin dɛn | Steinlɛs stiɛl we dɛn mek | Stiɛl gred ɔ hadnɛs fɔ spɛsifa if na di standad fɔ bay kɔntrol am |
| Sho | Embossed / tekstur / spɛshal patɛn | Apruv patɛn jɔyometri, dip ɛn vijual ifɛkt |
| Patna Opshɔn dɛn | Grid, wev, dayamɔn, tik, linin, silk, gren ɛn kɔstɔmayz tɛkstɔr dɛn we de ɔnda fisibiliti | Gi patna sampul, artwok ɔ finish-kad rɛfrɛns |
| Tiknɛs Opshɔn dɛn we De Naw | 0,6 mm / 0,8 mm / 1,0 mm; ɔda spɛsifikɛshɔn dɛn we dɛn kin kɔnfɔm | Match laminator we de naw ɛn prɛs-stak dizayn |
| Plɛt Sayz | A4 / A3 / kɔstɔmayz mashin-spɛsifi k saiz | Eksakt lεngth εn width dεn rεkomεnd insted כnli A3/A4 tεminכlכji |
| Sayd dɛn we gɛt Patɛn | Dɛn kin ebul fɔ evalyu singl-sayd ɔ tu-sayd patɛn kɔnstrɔkshɔn | Kɔnfɛm if ɔl tu di say dɛn nid di sem ɔ difrɛn finish |
| Edj Tritmɛnt we dɛn kin du | Smɔl, trim ɛn deburred ed dɛn; kɔstɔmayt kɔna tritmɛnt de | Gi kɔna rayus ɔ drɔ usay nid de |
| Fim we de protɛkt pɔsin | Surface protective film kin spɛsifa fɔ shipmɛnt | Kɔnfɛm di kayn fim ɛn di tin dɛn we dɛn nid fɔ pul |
| Kompatibl Card material s | PVC , PETG , PC , ABS ɛn kɔmpitabl kɔmpɔzit kad strɔkchɔ dɛn | Validate tempɔret, prɛshɔn ɛn rilis bihayvya wit di aktual kad stak |
| Aplikeshɔn dɛn | Pɔsnalayz kad, mɛmbaship kad, gift kad, ID kad, RFID kad, spɛshal kad ɛn kad prelam shit | Faynal tɛkstɔr fɔ apruv pan di finish laminated kad |
| OEM Kastamayzeshɔn | Patna, saiz, tik, ed tritmεnt, protεktiv film, pak εn lεbul | Tul ɔ sɛtup kin aplay to nyu kɔstɔm tɛkstɔr |
| Lid Taym | Kot akɔdin to patɛn, dimɛnshɔn, kwantiti ɛn kɔstɔmayshɔn | Konfam afta teknikol spesifikeshɔn aprɔval |
Spɛsifikeshɔn klarifyeshɔn: Di fɔs vɛshɔn fɔ dis pej bin list akitekchral stenlɛs stiɛl dimɛnshɔn dɛn lɛk 1000 × 2000 mm ɛn 1220 × 2440 mm togɛda wit 0.3–2.0 mm tiknes. Dɛn spɛsifikɛshɔn dɛn de kɔrɛkt mɔ klos to jenɛral dɛkɔretiv stenlɛs stiɛl shit prodak dɛm. Fɔ dis kad-lamination prodak, di wan dɛn we de bay fɔ yuz di aktual lamination-mashin plet saiz ɛn di aplikebul Wallis kad-plet spesifikeshɔn.
Wan patɛn kad laminɛshɔn stɛl plet na wan stenlɛs stiɛl prɛs plet we dɛn kin yuz bak wit wan kɔntrol ɛmbos ɔ tɛkstɔr kɔntakt sɔfays. Dɛn kin instɔl am insay di hot-prɛs stak fɔ wan pɔshɔnal kad laminatɔ fɔ mek wan patikyula dɛkɔretiv tɛkstɔr na di ɔda say na wan plastic kad sheet.
We dɛn ɔt ɛn prɛs kad kɔr shit, Overlay film s ɛn ɔda layers, di kad matirial we de na do kin kɔntakt di stɛl plet we gɛt patɛn. כnda fayn prכsεs kכndishכn dεm, di sכfayz de fala di plet tεkschur εn i de rεtεn da vishכnal כ tכktil kכrakt de afta i kol.
Wan stɛl-plet pɔtn na fizik sɔfays tɛkstɔr pas fɔ print at wok. Grafik ɛn kɔlɔ dɛn kɔmɔt frɔm di printin layt, we di stɛl plet de inflɔws sɔfayz rilif, riflekshɔn ɛn taktil apinans.
Akitekchɔral ɛmbos stenlɛs stiɛl na nɔmal wan di finish dɛkɔretiv bildin matirial sɛf. Kad lamination stɛl plet na insted na prodakshɔn tul we dɛn kin yuz bɔku tɛm fɔ mek plastic kad sheet.
Fayn-grɛyn tɛkstɔr kin mek wan subtil taktil ɛn lɔw-riflɛkshɔn kad sɔfays we nɔ de dominate print artwok. Dɛn patɛns ya fayn fɔ mɛmbaship kad, branded kad ɛn ɔda prɔdak dɛn we nid ɔndastated tɛkstɔr.
Silk- ɔ linin-stayl sɔfays dɛn de mek dairekshɔn ɔ wev vijual tɛkstɔr. di sem kayn plet tכp dεm dεn de yuz bak insay sεlekt RFID inlay εn prelam aplikεshכn usay dεn nid fכ kכntrol rכf sεf.
Tri, wud-gren ɛn ɔrganik tɛkstɔr kin ad wan strɔng dɛkɔretiv aydentiti to kɔstɔmayz mɛmbaship, gift, prɔmoshɔnal ɛn kɔlektif kad dɛn.
Grid, dayamɔn, wev ɛn ɔda ripit jɔyometrik strɔkchɔ dɛn kin evalyu fɔ branded ɔ spɛshal kad usay di sɔfayz patɛn fɔm pat pan di vijual dizayn.
Yu kin tɔk bɔt nyu patɛns yuz rɛfrɛns plet, kad we dɔn dɔn, fizik tɛkstɔr sampul ɔ dizayn kɔnsɛpt. Tulin fisibiliti, patɛn ripit, dip, saiz ɛn MOQ fɔ kɔnfɔm bifo kɔstɔm divɛlɔpmɛnt.
| Stiel Plɛt Tayp | Surface Karakta | Tipik Aplikeshɔn |
|---|---|---|
| Miro / Ultra Glossy we yu kin yuz | Smɔl say we dɛn dɔn polish fayn fayn wan | Plastik kad dɛn we gɛt ay glos |
| Fayn Mat | Low-riflekshɔn fayn tɛkstɔr | ID, mɛmbaship ɛn kɔmɛshɔnal kad dɛn we nid fɔ gɛt muted surface |
| Kɔs Kɔs Mat | Mɔ visible rɔf tɛkstɔr | Speshal taktil kad surfaces |
| Silk | Fayn dairekshɔn ɔ wev tɛkstɔr | RFID prelam, inlays ɛn pɔsnalayz kad aplikeshɔn dɛn |
| Speshal Patna | Difayn dɛkɔretiv tɛkstɔr lɛk gren, tik, grid, dayamɔn ɔ kɔstɔm pɔtn | Plastik kad dɛn we dɛn mek fɔ yusɛf ɛn we gɛt brand |
Tekstɔr fɔ kɔntinyu fɔ bi kɔnsistɛns we yu de si akɔdin to di plet eria we yu kin yuz. Varieshɔn insay di patɛn dip ɔ difinishɔn kin prodyuz visible difrɛns bitwin kad dɛn we dɛn panch frɔm difrɛn pozishɔn dɛn na di sem laminated sheet.
Dɔst, patikyula, rεsidεnt, dεnt εn skrach dεm we yu nכ want kin tכn pan di plastic sεf we dεn de laminεshכn. So fɔ inspekshɔn ɛn klin di plet na impɔtant tin dɛn fɔ kɔntrol di kwaliti.
Stebul flatnɛs de ɛp fɔ mek dɛn kɔntinyu fɔ kɔntakt kɔnsistɛns insay di lamination stak. Wan wɔp plet kin kɔntribyut to nɔ ivin prɛshɔn, sɔfayz chenj ɛn nɔ stebul kad-shit rizɔlt.
Di ed dɛn we dɛn dɔn dɔn fayn fayn wan de ridyus di risk fɔ mek shap bɔr dɛn pwɛl kad sheet dɛn, kusɛn pad dɛn, ɔpreshɔn ɔ prodakshɔn matirial dɛn we de nia dɛn.
Kad lamineshɔn plet dɛn na prodakshɔn tul dɛn we dɛn kin yuz bak. Aktual savis layf dipen pan plet matirial, surface texture, hot, prɛshɔn, klin we, handel ɛn di akseptabl wear limit fɔ di finish kad.
PVC na wan pan di mכst kכmכn mεtirial dεm we dεn kin yuz wit patεn laminεshכn stεl plet dεm. Di aplikeshɔn dɛn na mɛmbaship kad, lɔyalti kad, gift kad, akses kad, prɔmoshɔnal kad ɛn spɛshal plastic kad.
Plɛt dɛn we gɛt patɛn kin evalyu bak wit PETG kad sheet dɛn. Di lamineshɔn rɛsipɛkt fɔ mach to di PETG kɔr, Overlay film ɛn printin strɔkchɔ we yu dɔn pik.
PC kad kin nid difrɛn laminɛshɔn tɛmpracha ɛn prɛshɔn kɔndishɔn frɔm kɔvɛnshɔnal PVC . Plɛt kɔmpatibiliti fɔ so kɔnfyus agens di aktual PC prodakshɔn saykl.
Patna ɛn silk laminɛshɔn plet dɛn kin yuz insay sɔm sɛlɛkɛt RFID kad ɛn prelam aplikeshɔn usay inlay, ɛntena ɛn ɔta kad matirial dɛn kin lamin togɛda ɔnda kɔntrol ɔt ɛn prɛshɔn.
Kɔmpatibl ABS ɛn mɔlti-matirial kad strɔkchɔ dɛn kin tɛst bak. Baya dɛn fɔ validet di ɔl matirial stak pas fɔ asum di sem pefɔmɛns akɔs PVC , PETG , PC ɛn ABS .
Align print kad sheet, kor matirial, Overlay film s, RFID inlay ɛn ɔda layers akɔdin to di aprɔv kad kɔnstrɔkshɔn.
Chek di stɛl sɔfays fɔ patikyula, kɔntaminɛshɔn, skrat, dent ɛn ɔda mak dɛn we yu nɔ want bifo ɛvri prodakshɔn batch.
Put kad sheet bitwin di lamineshɔn plet dɛn togɛda wit di wul, silikon ɔ ɔda kusɛn matirial dɛn we yu nid akɔdin to di laminatɔ kɔnfigyushɔn.
Rɔn di aprɔv lamineshɔn saykl. Tɛmpratura, prɛshɔn ɛn tɛm fɔ de fɔ fala di kad matirial spɛsifikɛshɔn ɛn validet prodakshɔn rɛsipɛkt.
Kontrol kol de ɛp fɔ stebul di plastic kad shit ɛn kip di transfa sɔfa patɛn bifo yu ɔndo.
Inspek di tɛkstɔr kɔnsistɛns, flatnɛs, bɔbul, sɔfays dɛfɛkt, rilis bihayvya ɛn print apinans bifo di laminated sheet muf to panch ɔ pɔsnalayzeshɔn.
If yu nid fɔ riprodyuz wan kad tɛkstɔr we dɔn de, sɛn wan aprɔv kad ɔ stɛl plet sampul usay i pɔsibul. Wan fyzikal rεfrεns de gi klia infכmeshכn bכt dip, glos εn taktil kכrakt pas fכto nכmכ.
Fɔ nyu patɛn dɛn we dɛn dɔn disayn, gi di ripit motif, dimɛnshɔn, patɛn ɔriɛnteshɔn ɛn di vijual ifɛkt we yu want. Teknik rivyu de disayd if dɛn kin mek di dizayn as lamination plet.
Dairekshɔn patɛn lɛk silk, linin, wev ɔ wud gren fɔ alaynɛd to di kad ɔriɛnteshɔn we dɛn want. Dis fɔ kɔnfyus bifo dɛn mek kɔstɔm plet.
Di aprɔval we dɛn kin abop pan pas ɔl na fɔ laminate di kɔstɔma in rial PVC , PETG , PC ɔ ɔda kad strɔkchɔ yuz di sampul plet ɛn kɔmpia di tɛkstɔr we dɔn wit di target standad.
Disid if di rikwaymɛnt na subtil gren, silk tɛkstɔr, linin ifɛkt, jɔyometrik pɔtn, wud tɛkstɔr ɔ kɔstɔm dɛkɔretiv sɔfays.
Gi di plet dimɛnshɔn dɛn we de naw ɔ di laminator wok eria. Eksakt milimita dimɛnshɔn dɛn bɛtɛ pas jenɛrik diskripshɔn dɛn lɛk A3 ɔ A4.
Wallis naw de list 0.6 mm, 0.8 mm ɛn 1.0 mm fɔ in kad-laminɛshɔn stɛl plet rɛnj. Yuz di sem plet spɛsifikɛshɔn we di validet laminatɔ stak gɛt pas nɔmɔ dɛn tek tɛm apruv chenj.
Stet if di kad de yuz PVC , PETG , PC , ABS , RFID prelam ɔ ɔda kɔnstrɔkshɔn so dɛn kin plan fɔ du fayn prodakshɔn tɛst.
If dɛn go yuz ɔl tu di say dɛn na di stɛl plet, tɔk if dɛn nid di sem patɛn, difrɛn patɛn ɔ wan patɛn ɛn wan ɔda we fɔ dɔn.
Tεmpratura, prεshכn, hεt tεm, kol saykl, kushכn pad εn stak kכnfigureshכn de εp fכ evaluate di wok envayroment.
Yuz wan sampul plet na di aktual laminator fɔ verify patɛn transfa, kad rilis, surface apinans ɛn dimɛnshɔnal stebiliti bifo yu apruv mas prodakshɔn.
| Isyu | Stilin Plɛt Chɛk | Ɔda Tin dɛn |
|---|---|---|
| Transfa Pɔtn we Nɔ Ivin | Chek tekscha yunifom ɛn plet flatnɛs | Prɛshɔn yunifom, kusɛn pad ɛn shit tik |
| Mak dɛn we de na di wɔl we yu nɔ bin de ɛkspɛkt | Inspek skrat, dent ɛn patikyula | Kontaminɛshɔn insay kad stak |
| Kad we de stik | Chek di plet klin ɛn di kɔndishɔn na di say we di plet de | Overlay film fכmyuleshכn, tεmprachכ εn kol |
| Sheet Warpage we dɛn kɔl | Verifay di plet we flat | Hɛt, kol, prɛshɔn ɛn matirial shrinkage |
| Patna Tu Wik | Chek di dip patna ɛn di we aw di plet dɔn wɛr | Tεmprachכ, prεshכn, Overlay film fכmyuleshכn εn kol |
| Patna Tu Strɔng | Kɔnfɛm di plet tɛkstɔr we yu dɔn pik | Lamination resipi ɛn plastic sɔfays rispɔns |
Stilin plet dɛn we gɛt patɛn nid fɔ gɛt tayt kɔntrol fɔ si pas ɔdinari flat mɛtal sheet dɛn bikɔs dɛn kin mek ɛnitin we nɔ fayn na di kad we dɛn dɔn dɔn. Dipen pan di ɔda spɛsifikɛshɔn we dɛn dɔn gri fɔ, inspekshɔn kin inklud:
Plɛt tik ɛn tik tolɛreshɔn
Di lɔng ɛn di waid
Di plet we flat
Patna tayp ɛn patɛn ɔriɛnteshɔn
Tekschɔ kɔnsistɛns akɔdin to di yuzabl eria
Surface skrat, dent ɛn kɔntaminɛshɔn
Wan- ɔ tu-sayd finish
Edj deburring ɛn kɔna kɔndishɔn
Protektiv film kondishɔn usay dɛn spɛsifa
Sampul lamination rizulyt usay dɛn nid am
Pakɛj ɛn plet aydentifikeshɔn
Wan patɛn stɛl sɔfays kin luk difrɛn bifo ɛn afta dɛn transfa am pan PVC ɔ PETG . Fɔ program dɛn we rili impɔtant fɔ mek yu luk, mentɛn ɔl tu wan aprɔv stɛl plet ɛn wan finish-kad sampul as prodakshɔn rɛfrɛns.
Patna sɔfays fɔ protɛkt frɔm mɛtal-to-mɛtal rɔb, impak ɛn kɔntaminɛshɔn we dɛn de transpɔt. Protektiv film, separator ɛn rigid ɛkspɔt pak kin spɛsifa akɔdin to ɔda rikwaymɛnt.
Rimov dɔst ɛn prodakshɔn rɛsɛdyu yuz wan we we kɔmpitabl wit di stenlɛs stiɛl ɛn patɛn sɔfays. Kɔntaminɛshɔn we dɛn lɛf insay fayn fayn tɛkstɔr kin leta transfa to di kad sheet.
Abrasive polishing kin chenj fayn gren, silk ɔ mat patɛn fɔ ɔltɛm. We yu klin am, yu fɔ pul di dɔti we yu nɔ chenj di we aw dɛn dɔn gri fɔ mek am.
Stɔr plet dɛn pan klin, flat sɔpɔt fɔ ridyus di risk fɔ bɛn ɛn fɔ pwɛl di patɛn. Nɔ stak we yu nɔ kɔntrol usay fes dɛn we gɛt patɛn de rɔb dairekt pan ɔda mɛtal sɔfays dɛn.
We skrach, dent ɔ sɛkshɔn we dɔn pwɛl de apia bɔku tɛm pan kad dɛn we dɛn dɔn lamin, dɛn fɔ inspɛkt di plet we afɛkt ɛn ripɛnt usay i pɔsibul ɔ riples am.
Klɔb, ɔtel, jim ɛn mɛmbaship program kin yuz taktil ɔ dɛkɔretiv tɛkstɔr fɔ difrɛns prɛmiɔm kad prɔdak dɛn.
Ritayl ɛn branded gift kad kin jɔyn print artwok wit fizik surface patɛn fɔ mek wan mɔ difrɛn kad apinɛns.
Kastɔm kad tɛkstɔr kin riinfɔs vijual branding fɔ prɔmoshɔnal, ivin ɛn kɔstɔma-ɛnjɛjmɛnt program dɛn.
RFID akses, ɔtel ɛn kampus kad dɛn kin yuz sɔm tɛkstɔr finish dɛn we di fayn kad kɔnstrɔkshɔn ɛn pɔsnalayzeshɔn prɔses kɔmpitabl.
Dɛkɔretiv patɛn dɛn rili yusful fɔ limited-ɛdyushɔn, kɔlektif ɛn spɛshal kad usay taktil apia de fɔm pat pan di prɔdak valyu.
Silk ɔ tɛkstɔr stɛl plet dɛn kin evalyu bak fɔ sɛlɛkɛt RFID inlay ɛn prelam shit aplikeshɔn dɛn we nid wan patikyula sɔfays afta laminɛshɔn.
Wallis de saplae PVC , PETG ɛn PC kad shit, Overlay film s, RFID inlay, lamineshɔn stɛl plet, wul pad, silikon pad ɛn rilat matirial fɔ pɔshɔnal kad manufakchurin.
Miro glos, mat, silk ɛn kɔstɔmayz patɛn sɔfays alaw kad manifakta dɛn fɔ divɛlɔp difrɛn finish-kad tɛkstɔr yuz plet spɛsifikɛshɔn dɛn we fit fɔ ɛni prɔdak.
Dɛn kin rivyu di mashin-spɛsifi k dimɛnshɔn dɛn akɔdin to di lamineshɔn ikwipmɛnt dɛn we de naw instead fɔ fos di pɔsin we bay fɔ adopt wan standad plet fɔmat.
Di wan dɛn we de bay kin sɛn fizik sɛmpul dɛn, kad dɛn we dɔn de ɔ pɔtn kɔnsɛpt fɔ tɛknikal ɛvalueshɔn we wan standad mat ɔ silk finish nɔ mit di prɔjek rikwaymɛnt.
Sampul lamination alaw bayer fɔ verify patɛn transfa, kad rilis, surface kwaliti ɛn kɔmpatibiliti wit di prodakshɔn sɛtin dɛn we de naw.
Wallis de sɔpɔt kad faktri, RFID manifakta, kad-matirial distribyushɔn ɛn ɔda B2B kɔstɔma dɛn we nid fɔ ripit patɛn, dimɛnshɔn ɛn pak spɛsifikɛshɔn.
Wallis de wok wit intanashɔnal kad manifakta dɛn, matirial distribyushɔn ɛn smat-kad prodakshɔn kɔmni dɛn we de saplae kad matirial ɛn lamination aksesɔri fɔ difrɛn prodakshɔn rikwaymɛnt dɛn.
Di fidbak we di kɔstɔma dɛn kin gi kin gi ɔda infɔmeshɔn bɔt di savis ɛn ɛkspiriɛns fɔ bay tin dɛn. Fɔ tɛknikal aprɔval, di wan dɛn we de bay fɔ stil kwalifay patɛn lamineshɔn plet dɛn we de yuz dimɛnshɔnal inspekshɔn, sɔfays kɔmpiashɔn ɛn aktual kad-lamineshɔn tɛst dɛn.
Na stenlɛs stiɛl laminatɔ plet wit kɔntrol tɛkstɔr sɔfays we de transfa wan fizik patɛn pan PVC , PETG , PC ɔ ɔda kɔmpatibl plastic kad sɔfays we dɛn de du ɔt-prɛs laminɛshɔn.
Nɔ, dɛn kin yuz akitɔkchral ɛmbos stenlɛs stiɛl as di dɔn fɔ dekɔret panɛl. Dis prodak na wan tin we dɛn kin yuz bak fɔ mek tin dɛn we dɛn kin yuz insay kad laminatɔ fɔ mek tɛkstɔr pan plastic kad dɛn.
Wallis in kɔrɛnt kad-laminɛshɔn stɛl plet rɛnj prɛmiamli list 0.6 mm, 0.8 mm ɛn 1.0 mm. Dɛn fɔ sɛn ɔda tin dɛn we dɛn nid fɔ mek dɛn kɔnfyus dɛn wit di tɛknikal.
Dat rεnj bin apia na di pej bifo tכgeda wit di akitekchכral shit dimεnshכn εn aplikεshכn dεm. I nɔ fɔ yuz am as di praymari kad-lamineshɔn plet spɛsifikɛshɔn pas Wallis sɛpret kɔnfɔm dɛn tiknes dɛn de fɔ dis ɛksaktɔl prodak.
Yɛs. A3, A4 ɛn kɔstɔmayz kad-lamineshɔn plet fɔmat dɛn kin rivyu. Eksakt milimita dimɛnshɔn dɛn kin rikɔmɛnd bikɔs di mashin fɔmat kin difrɛn bitwin di wan dɛn we de mek laminatɔ.
Yɛs. Gi di rayt lɔng, waid ɛn tik fɔ yu plet we de naw ɔ di laminatɔ mɔdel ɛn di dimɛnshɔn dɛn we de wok.
Kastom tɛkstɔr dɛn kin evalyu akɔdin to patɛn kɔmplisiti, ripit dimɛnshɔn, dip ɛn tul fisibiliti. I fayn fɔ yuz fizik rɛfrɛns ɔ dizayn fayl.
Di opshɔn dɛn kin inklud mat, silk, linin, gren, tik, grid, wɛv, dayamɔn ɛn ɔda kɔstɔmayz tɛkstɔr dɛn, we yu go ebul fɔ prodyuz naw ɛn di sampul aprɔval.
Dɛn kin ebul fɔ evalyu plet dɛn we gɛt patɛn we gɛt tu sayd. Kɔnfɛm if ɔl tu di say dɛn nid di sem pɔtn, tu difrɛn patɛn ɔ wan kɔmbaynshɔn fɔ pɔtn ɛn ɔda finish dɛn.
Yɛs. PVC kad prodakshɔn na wan pan di men aplikeshɔn fɔ spɛshal-patɛn lamineshɔn plet dɛn. Test di plet wit di intended Overlay film , printin ɛn lamination sɛtin bifo bulk prodakshɔn.
Dɛn kin ebul fɔ evaluate fayn plet dɛn wit PETG kad strɔkchɔ dɛn. Bikɔs PETG prɔsesin kɔndishɔn kin difrɛn frɔm PVC , di fayn sɔfa fɔ tɛst yuz di aktual PETG matirial dɛn.
Wallis list PC bitwin di kompitibul kad matirial fɔ in lamineshɔn plet rɛnj. Di plet spɛsifikɛshɔn fɔ validet agens di tɛmpracha, prɛshɔn ɛn kol kɔndishɔn dɛn we dɛn yuz fɔ di PC kɔnstrɔkshɔn we dɛn bin want.
Selekt silk ɛn tɛkstɔr plet kɔnstrɔkshɔn dɛn kin yuz fɔ RFID inlay ɔ prelam shit aplikeshɔn dɛn. Prɛshɔn ɛn kusɛn kɔnfigyushɔn fɔ mach to di inlay ɛn ɛntena dizayn.
Di patɛn nɔmal fɔ kɔntakt di kad Overlay film ɔ ɔdasay layt pas fɔ engrav di ink we dɛn print dairekt wan. Faynal risal dipכnt pan di komplit kad strכkchכ, Overlay film tik, patεn dip εn laminεshכn rεsipi.
Nɔ, dip pat pan di pat fɔ mach di vijual ɛfɛkt we dɛn want ɛn di plastic matirial. Tɛkstɔr we strɔng pasmak kin chenj di we aw dɛn print ɔ mek wan sɔfa we nɔ fayn fɔ pɔsnalayz dɔŋ di strim.
Kompatibiliti wit inkjet, thermal transfer, dye sublimation, laser engraving ɔ ɔda pɔsnalayzeshɔn we dɛn de yuz, dipen pan di surface texture ɛn kad kɔnstrɔkshɔn. Test di intended pɔsnalayzeshɔn prɔses pan di finish laminated kad.
Savis layf dipen pan tɛmpracha, prɛshɔn, klin, sɔfays wear, stɔrɔj ɛn handel. Wan fiks saykl layf fɔ jɔs tɔk we dɛn sɔpɔt am bay di aplikebul prodak spɛsifikɛshɔn ɛn akseptɛns krayteria.
Yuz wan we fɔ klin we go gri wit di stenlɛs stiɛl ɛn di we aw dɛn mek am. Nɔ abrasive polishing we go chenj di pɔtn we dɛn de kɔntrol, ɛn pul di patikyula tin dɛn we de na fayn fayn grov dɛn bifo yu yuz am bak.
Protektiv film kin spɛsifa fɔ ridyus sɔfays skrach ɛn kɔntaminɛshɔn we dɛn de transpɔt. Kɔnfɛm di prɔtɛktiv-film strɔkchɔ we yu nid we yu de aks fɔ kot.
I fayn fɔ mek dɛn tɛst sampul, mɔ fɔ di tɛkstɔr dɛn we dɛn dɔn kɔstɔmayz. Yuz di sampul plet wit di aktual kad matirial ɛn laminator fɔ apruv patɛn transfa ɛn sɔfayz kwaliti.
MOQ dipen pan plet saiz, patna, tik, if nyu tul nid ɛn tɔtal kɔstɔmayshɔn. Standard ɛn sampul rikwaymɛnt fɔ kɔnfɔm wit Wallis bifo yu ɔda.
Lid tεm dipכnt pan if di patεn de כ nyu divεlכpmεnt, plet dimεnshכn, kwantiti εn prodakshכn schedule. Dɛn kin kot di las tɛm afta dɛn dɔn gri fɔ di spɛsifikɛshɔn.
Gi plet lɔng, wit, tik, patɛn ɔ rɛfrɛns sampul we dɛn nid, singl- ɔ dabl-sayd finish, laminatɔ mɔdel, kad matirial, opareshɔn kɔndishɔn, kwantiti, edj rikwaymɛnt, pak ɛn dilivri dɛstineshɔn.
Yu de luk fɔ wan rilibul kɔstɔm patɛn kad lamineshɔn stɛl plet manifakta fɔ PVC , PETG , PC , RFID ɔ pɔsnalayz kad prodakshɔn? Send Wallis yu plet dimɛnshɔn, tiknes, tɛkstɔr sampul, laminatɔ mɔdel, kad matirial ɛn ɔda kwantiti fɔ tɛknikal ɛvalueshɔn, sampul ɛn faktri-dayrɛkt prayz.
