I loko o ka ʻoihana hana kāleka e ulu wikiwiki nei, ua lilo nā pepa prelam RFID i mea pono no ka hana ʻana i nā kāleka akamai kiʻekiʻe. ʻO kēia mau pepa ke kumu nui e hoʻohui ai i nā inlays RFID - nā ʻāpana i hoʻopili ʻia a me nā antenna - i loko o nā papa PVC paʻa, e ʻae ai i ka hana nui o nā kāleka contactless.
ʻO kahi inlay ka papa o loko o kahi kino kāleka, aia ma waena o nā uhi. ʻAʻole like me kahi overlay (e pale ana i ka ʻili), hōʻoia ka inlay i ka paʻa o ke kāleka a hiki ke hoʻopaʻa i ka ʻenehana kāleka akamai e like me RFID chips a me nā antennas.
I loko o ka ʻoihana kāleka akamai, ʻelua ʻano nui o ka inlays: Core Sheet Inlays – Plain structural core no nā kāleka maʻamau. RFID Prelam Inlays - ʻO nā pepa kumu i hoʻopaʻa mua ʻia me nā pahu RFID a me nā antenna.
125KHz Inlay 13.56MHz Inlay
PVC PETG PC Inlay
Pre-Inlay Pre-prelam
Hoʻokomo i loko o ka hana kāleka
Hoʻokomo ʻia ka pepa kumu PVC
ʻO ka wehewehe nui
ʻO ka pepa kumu PVC ke kino nui o ke kāleka.
Hoʻopili pinepine ʻia ma waena o ʻelua kiʻiʻoniʻoni overlay.
Hoʻolālā ʻia no ka lōʻihi, kūpaʻa, a me ka lamination maʻalahi.
RFID Prelam Inlays
Ka wehewehe nui
Hoʻohui ʻia kahi inlay prelaminated i kahi antenna a me ka chip i loko o nā pepa PVC ma mua o ka lamination.
Hāʻawi i ke kamaʻilio pili ʻole no nā kāleka akamai hou.
Hoʻolālā ʻia no ka lōʻihi kiʻekiʻe a me ka hoʻopili ʻole ʻana i ka hana kāleka hope.
125 kHz RFID Inlays (Ka pinepine haʻahaʻa – LF)
ʻO 125 kHz inlays he haʻahaʻa haʻahaʻa haʻahaʻa RFID i hoʻohana nui ʻia i nā noi e koi ana i ke kamaʻilio pōkole a hilinaʻi. Hana maikaʻi lākou i nā kaiapuni me ka metala a i ʻole ka wai keakea kahi e hāʻule ai nā alapine kiʻekiʻe.
13.56 MHz RFID Inlays (Ke alapine kiʻekiʻe – HF)
ʻO nā inlays 13.56 MHz he mau hoʻonā RFID kiʻekiʻe, e hāʻawi ana i ka nui o ka ʻikepili a me nā hiʻohiʻona palekana ma mua o nā inlays LF. Hoʻolilo kēia iā lākou i mea maʻamau no ka uku a me nā ʻōnaehana transit.
ʻO Shanghai Wallis Technology Co., Ltd. kahi mea hana alakaʻi a me ka hāʻawi ʻana i ka hoʻoponopono i ka hana ʻana i nā inlays RFID, nā mea uhi, a me nā lako hana kāleka. Me nā makahiki o ka ʻike i ka ʻenehana kāleka akamai, ua kūkulu ʻo Wallis i kahi inoa kaulana no ka hāʻawi ʻana i nā huahana hilinaʻi, kūlana kiʻekiʻe i hilinaʻi ʻia e nā mea kūʻai aku honua.
Ma Wallis, hana mākou i kahi ākea o nā inlays, ʻo ia hoʻi: Core Sheet Inlays no nā hale kāleka maʻamau Antenna Inlays (coil wale nō, ʻaʻohe chip) no ka hana maʻalahi RFID Prelam Inlays me ka chip i hoʻopili ʻia a me nā antenna no nā noi mākaukau-e-laminate.
Loaʻa kā mākou inlays i nā alapine like ʻole - 125 kHz (LF), 13.56 MHz (HF/NFC), a me UHF - no ka hoʻokō ʻana i nā pono mākeke like ʻole, mai ka ʻae ʻana a me ka ʻike ʻana i ka waihona kālā, ka halihali, a me nā ʻōnaehana uku akamai.
Wallis------ Huahana
Ua hilinaʻi ʻia nā huahana Wallis e nā mea hana kāleka, nā keʻena aupuni, nā panakō, a me nā keʻena paʻi paʻi ma 50 mau ʻāina.
ʻO SGS, kahi hui multinational i hoʻokumu ʻia ma Switzerland e loea i ka nānā ʻana, hōʻoia, hoʻāʻo, a me nā lawelawe hōʻoia. Hiki i ka SGS Detection ke hoʻopili pono i ko lākou hiki ke ʻike i nā mea like ʻole, nā mea haumia, a i ʻole nā mea ʻino i nā huahana, nā mea, a i ʻole nā kaiapuni e hoʻohana ana i nā ʻano hoʻokolohua holomua a me nā ʻenehana. Hiki i kēia ke hoʻopili i kahi ākea o nā ʻoihana e pili ana i ka meaʻai, nā lāʻau lapaʻau, nā kemika, ke kaiapuni, a me nā mea hou aku.
Hoike Nana
485*295*0.1mm
485*295*0.15mm
485*295*0.32mm
485*295*0.76mm
Ka hoomaopopo ana i ka Pepa Inlay
ʻO ka pepa inlay kahi mea i hoʻomākaukau kūikawā ʻia i hoʻohana ʻia i ka hana kāleka (e like me nā kāleka ID, kāleka akamai, kāleka panakō, kāleka lālā, a i ʻole kāleka RFID). Hoʻohana maʻamau ia ma ke ʻano he kumu nui o ke kāleka, waiho ʻia ma waena o nā kiʻiʻoniʻoni overlay i ka wā lamination.
Hoʻoholo ka pepa inlay i nā hana koʻikoʻi a me nā waiwai o ke kāleka, me ka lōʻihi, ka maʻalahi, a ma kekahi mau mea, ka hana uila inā hoʻokomo ʻia me nā mea RFID.
Nā ʻano o nā Pepa Inlay
Nā Pepa Inlay PVC Maʻemaʻe i hana ʻia mai ka plastik PVC maʻamau. E lawelawe ma ke ʻano he kumu hoʻolālā o ke kāleka me ka ʻole o ka hana uila. Hoʻohana maʻamau i nā kāleka paʻi maʻalahi (kāleka kūpaʻa, kāleka haumāna, kāleka lālā).
RFID / Pepa Hoʻokomo ʻole i pili
Loaʻa nā antenna keleawe i hoʻokomo ʻia a me nā microchips. E ho'ā i ka ʻenehana pili ʻole e like me 125KHz, 13.56MHz, a i ʻole UHF alapine. Hoʻohana ʻia i nā kāleka hoʻokele komo, nā kāleka kaʻa, nā kāleka uku, a me nā huahana NFC.
Nā Pepa Hoʻomoe Prelamated (Prelam).
ʻO nā inlay i hoʻomākaukau mua ʻia me nā antennas a me nā pahu i hoʻopaʻa ʻia i loko o nā pepa PVC a i ʻole PETG. Hāʻawi i ka ikaika kiʻekiʻe a me ka maʻalahi o ka hana hou ʻana (paʻi, kuʻi). Hoʻohana nui ʻia i ka hana kāleka ʻoihana.
Hoʻolauna i nā Pepa Inlay PVC
ʻO nā Pepa Inlay PVC Plain nā papa kumu kumu i hoʻohana ʻia i ka hana kāleka. Hana ʻia lākou mai ka polyvinyl chloride (PVC) me ka ʻole o nā mea uila e like me nā chips a i ʻole nā antenna. ʻO kā lākou hana nui ka hana ʻana ma ke ʻano he kumu hoʻokumu o kahi kāleka, e hāʻawi ana i ka ikaika, ka lōʻihi, a me ka ʻili maʻemaʻe no ka lamination hou, paʻi ʻana, a pilikino paha.
Hoʻonoho ʻia kēia mau ʻāpana ma waena o nā kiʻiʻoniʻoni overlay i ka wā o ka lamination, kahi e hoʻohui ai ka wela a me ke kaomi i nā papa i kahi kāleka paʻa.
ʻO nā pono o ka Plain PVC Inlay Sheets
Kūʻai-Effective - He koho ʻoi aku ka maikaʻi e hoʻohālikelike ʻia me RFID a i ʻole nā inlays uila. Versatile - He kūpono no nā ʻano kāleka he nui, mai nā ID a i nā kāleka hoʻolaha. Paʻa - Paʻa i ke kulou ʻana, ka haki ʻana, a me ka lole i kēlā me kēia lā. Hoʻopilikino - Hiki ke hana ʻia i nā nui like ʻole, nā mānoanoa, a me nā kala e pili ana i nā pono o ka mea kūʻai aku. Kūpono me ka Paʻi - Hana maikaʻi me ka paʻi offset, paʻi pale, paʻi kikohoʻe, a me ka lamination.
He aha ka RFID / Contactless Inlay Pepa?
ʻO RFID (Radio Frequency Identification) / Contactless Inlay Sheets ua hoʻolālā kūikawā ʻia nā pepa kumu i loaʻa nā ʻāpana uila i hoʻokomo ʻia—e like me nā antenna coils a me nā microchips—e hiki ai i nā kāleka ke hana i ke kamaʻilio uea.
ʻO kēia mau pepa inlay ka puʻuwai hana o nā kāleka akamai contactless, hiki iā lākou ke mālama a hoʻouna i ka ʻikepili me ka ʻole o ka pili kino. Hoʻohana nui ʻia lākou i ka mana komo, ka lawe ʻana, ka waihona kālā, a me nā noi NFC.
125KHz (Ka pinepine haʻahaʻa – LF)
Ka laulā: 2–10 cm (pōkole). Ka wikiwiki o ka ʻikepili: lohi, hiki ke hoʻomanaʻo ʻia. Hana: Hana maikaʻi ma kahi o ka metala, ka wai, a me nā kaiapuni paʻakikī. Palekana: Kumu, ʻaʻole i hoʻopili ʻia; kūpono no ka ʻike maʻalahi. Uku: He haʻahaʻa haʻahaʻa ma mua o ka HF a me UHF.
13.56MHz (Ke alapine kiʻekiʻe – HF / NFC)
Laulā: A hiki i 10 cm. Ka wikiwiki ʻikepili: ʻoi aku ka wikiwiki ma mua o LF, kākoʻo i ka mālama ʻikepili paʻakikī. Hana: Ke kaulike maikaʻi o ka laulā, ka wikiwiki, a me ka palekana. Palekana: Kākoʻo i ka hoʻopunipuni a me ka hōʻoia (e laʻa, MIFARE®, DESFire®). Nā Kūlana: ISO/IEC 14443, ISO/IEC 15693, NFC.
UHF (860–960MHz, ʻAha Kiʻekiʻe Loa)
Māhele: A hiki i 10 mika (ka lōʻihi). Kiʻekiʻe loa; hiki ke heluhelu i nā haneli he nui i ka manawa hoʻokahi. Hana: ʻOi aku ka maikaʻi no ka heluhelu nui ʻana a me ka nānā ʻana, akā ʻoi aku ka paʻa ma kahi kokoke i nā wai/metala. Palekana: Kaulike; hoʻomaikaʻi nā protocols hou i ka palekana akā ʻaʻole ikaika e like me HF no ka hoʻohana kālā. Nā Kūlana: ISO/IEC 18000-6C (EPC Gen 2).
He aha nā Pepa Inlay Prelaminated (Prelam)?
ʻO nā Pepa Inlay Prelaminated, i kapa ʻia ʻo Prelam Inlays, he mau pepa kāleka i hoʻomākaukau mua ʻia i loaʻa i nā antenna i hoʻokomo ʻia a me nā microchips, laminated i loko o nā mea paʻa e like me PVC, PET, a i ʻole PETG.
Hana lākou ma ke ʻano he kumu hana no ka hana ʻana i nā kāleka akamai RFID, e hana i ke kaʻina hana i ʻoi aku ka maikaʻi, kūpaʻa, a me ka hilinaʻi. Ma kahi o ka hui ʻana i nā ʻāpana a me nā antenna kaʻawale, hiki i nā mea hana kāleka ke hoʻohana pololei i nā inlay prelam, a laila paʻi, kuʻi, a hoʻopau i nā kāleka me nā uhi.
ʻO nā hiʻohiʻona nui o nā Pepa Inlay Prelam
Hoʻohui Hoʻohui - Hoʻopili mua ʻia ka Chip a me ka antenna i loko o ka lau. Paʻa Kiʻekiʻe - Kū'ē i ka wela, ke kaomi, a me ka piko i ka wā lamination. Hana Paʻa - E hōʻoia i ka hoʻopili pono ʻana i ka chip-to-antenna a me ka alignment. ʻO ka hana maʻalahi - Hoʻomaʻamaʻa i nā hana hana kāleka hou aʻe e like me ka paʻi ʻana, ke kuʻi, a me ka pilikino. Hoʻopilikino - Loaʻa i nā nui like ʻole, nā alapine (125KHz, 13.56MHz, UHF), a me nā hoʻolālā multi-chip.
ʻAe, hiki ke hoʻohana ʻia nā overlay PETG ma nā ʻano kāleka like ʻole. Inā ʻoe e hana nei i nā kāleka ʻoihana, nā kāleka ID, nā kāleka lālā, a i ʻole nā kāleka kālepa, hāʻawi ʻo PETG overlays i kahi papa pale a poni ʻia. Hoʻopili pū lākou me nā mea paʻi inkjet a me ka laser, e kūpono iā lākou no kahi ākea o nā papahana hana kāleka.
ʻAe, hiki ke hoʻohana ʻia nā overlay PETG ma nā ʻano kāleka like ʻole. Inā ʻoe e hana nei i nā kāleka ʻoihana, nā kāleka ID, nā kāleka lālā, a i ʻole nā kāleka kālepa, hāʻawi ʻo PETG overlays i kahi papa pale a poni ʻia. Hoʻopili pū lākou me nā mea paʻi inkjet a me ka laser, e kūpono iā lākou no kahi ākea o nā papahana hana kāleka.
ʻO PETG overlay kahi kiʻiʻoniʻoni plastic transparent i hoʻohana ʻia i ka hana kāleka e hoʻomaikaʻi ai i ka lōʻihi a me ka aesthetics. Hoʻohana ʻia ia ma luna o nā kāleka i paʻi ʻia e pale iā lākou mai ka ʻaʻahu a me ka waimaka i ka wā e hoʻohui ai i kahi hoʻopau nani. Hana ʻia kēia overlay mai PETG (Polyethylene Terephthalate Glycol), kahi polymer thermoplastic kiʻekiʻe i ʻike ʻia no kona māmā a me ka ikaika.
ʻIkepili Koʻikoʻi:
ʻO ka uhi ʻana o PETG he kiʻiʻoniʻoni plastic transparent.
Hoʻonui ia i ka lōʻihi o ke kāleka a me ke ʻano.
Hana ʻia mai PETG, kahi thermoplastic ikaika a maopopo.
Hoʻohana ʻia nā mea kāleka PVC no nā kāleka ʻike, nā kāleka uku, nā kāleka kūpaʻa a me nā makana, nā kāleka makana, nā hanana a me nā kāleka kiʻi, nā kāleka kī hōkele, a me nā kāleka halihali.
Hāʻawi nā kāleka PVC i ka lōʻihi a me ka maʻalahi no ka lawelawe pinepine ʻana a me ka ʻaʻahu a me ka waimaka.
Hiki iā lākou ke hoʻohui i nā ʻenehana like ʻole, e like me nā kaha magnetic, EMV chips, RFID/NFC, a me nā barcode a i ʻole QR code, e pili ana i nā koi noi.
ʻO nā kāleka PVC, i ʻike ʻia he kāleka polyvinyl chloride, i hana mua ʻia mai kahi ʻano plastic i kapa ʻia he polyvinyl chloride. ʻO PVC kahi polymer synthetic i hoʻohana nui ʻia i ʻike ʻia no kona kūpaʻa, ka maʻalahi, a me ke kūpaʻa ʻana i ka makū a me nā kemika. Hoʻohana maʻamau ia i nā noi like ʻole, me nā kāleka ID, nā kāleka hōʻaiʻē, nā kāleka lālā, a me nā kāleka komo.
WALLIS PLASTIC Hāʻawi i ka hopena hoʻokahi no nā ʻano mea kāleka āpau, mālama mākou i nā koi kikoʻī o kēlā me kēia mea kūʻai aku a hoʻololi i nā mea e loaʻa ai kahi kāleka e hoʻokō ai i kā lākou pono.
ʻO Shanghai Wallis Technology Co., Ltd he mea hoʻolako ʻoihana me nā mea kanu 7 e hāʻawi i nā Pepa Plastic, Plastic Film, Kāleka Base Material, Nā ʻano Kāleka āpau, a me ka lawelawe hana hana maʻamau i nā huahana plastik pau.
