Morekisi  Prelam Inlay bakeng sa Card

Mabapi le Wallis :Moetsi ea Tšeptjoang oa Inlay ea boleng bo holimo

Tlhaloso ea SGS

Ho hlahloba Tlaleho

Ho utloisisa Leqephe la Inlay

Letlapa la inlay ke thepa e mahareng e lokisitsoeng ka ho khetheha e sebelisoang ho etsa likarete (joalo ka likarete tsa ID, likarete tse bohlale, likarete tsa banka, likarete tsa litho, kapa likarete tsa RFID). Hangata e sebetsa e le sebopeho sa mantlha sa karete, e behiloeng lipakeng tsa lifilimi tse koahelang nakong ea lamination.

Leqephe la inlay le khetholla boholo ba mesebetsi le thepa ea bohlokoa ea karete, ho kenyelletsa le ho tšoarella, ho tenyetseha, 'me maemong a mang, ts'ebetso ea elektroniki haeba e kentsoe le likarolo tsa RFID.

Mefuta ea Maqephe a Inlay

Plain PVC Inlay Sheets
E entsoe ka polasetiki e tloaelehileng ea PVC.
Sebeletsa e le motheo oa meralo ea karete ntle le ts'ebetso ea elektroniki.
Hangata e sebelisoa ka likarete tse bonolo tse hatisitsoeng (likarete tsa botšepehi, likarete tsa liithuti, likarete tsa botho).

RFID / Maqephe a Inlay a sa Kopaneng

E na le li-antenna tsa koporo tse kentsoeng le li-microchips.
Numella theknoloji e se nang likhokahanyo joalo ka 125KHz, 13.56MHz, kapa maqhubu a UHF.
E sebelisoa ho likarete tsa taolo ea phihlello, likarete tsa lipalangoang, likarete tsa ho patala, le lihlahisoa tse lumelletsoeng ke NFC.

Prelaminated (Prelam) Inlay Sheets

Li-inlay tse lokiselitsoeng esale pele tse nang le li-antenna le li-chips tse seng li entsoe ka har'a maqephe a PVC kapa PETG.
Fana ka matla a phahameng le ts'ebetso e bonolo haholoanyane (ho hatisa, ho phunya).
E sebelisoa haholo ho etsa likarete tsa indasteri.

Hlahisa Lipampiri tsa Inlay tsa Plain PVC

Plain PVC Inlay Sheets ke likarolo tsa mantlha tse sebelisoang ha ho etsoa likarete. Li entsoe ka thepa ea polyvinyl chloride (PVC) ntle le lisebelisoa tsa elektronike tse kang li-chips kapa li-antenna. Karolo ea bona e ka sehloohong ke ho sebetsa e le motheo oa moralo oa karete, ho fana ka matla, ho tšoarella, le sebaka se boreleli bakeng sa ho lamination, khatiso kapa motho ka mong.

Lipampiri tsena li behoa pakeng tsa lifilimi tse koahelang nakong ea ts'ebetso ea lamination, moo mocheso le khatello li kopanyang lihlopha ho ba karete e phethiloeng.

Melemo ea Plain PVC Inlay Sheets

RFID / Contactless Inlay Sheets ke eng?
 

RFID (Radio Frequency Identification) / Contactless Inlay Sheets ke lipampiri tsa mantlha tse entsoeng ka ho khetheha tse nang le likarolo tsa elektronike tse kentsoeng—tse kang likhoele tsa manakana le li-microchips—tse lumellang likarete ho etsa puisano e se nang mohala.

Lipampiri tsena tsa inlay ke pelo e sebetsang ea likarete tse bohlale tse se nang mabitso, tse li nolofalletsang ho boloka le ho fetisa data ntle le ho kopana le 'mele. Li sebelisoa haholo taolong ea phihlello, lipalangoang, libankang le lits'ebetsong tsa NFC.

125KHz (Maqhubu a Tlase – LF)

Range: 2-10 cm (e khutšoanyane).
Lebelo la data: Boleng bo butle, bo lekanyeditsweng ba memori.
Tshebetso: E sebetsa hantle haufi le tšepe, metsi, le libaka tse thata.
Tšireletso: Ea motheo, eseng e patiloeng; e loketseng haholoanyane bakeng sa boitsebiso bo bonolo.
Litšenyehelo: Ka kakaretso li tlase ha li bapisoa le HF le UHF.

13.56MHz (Maqhubu a Phahameng – HF / NFC)

Bophahamo: ho fihlela ho 10 cm.
Lebelo la data: Ka potlako ho feta LF, e ts'ehetsa polokelo ea data e rarahaneng.
Tshebetso: Ho leka-lekana hantle ha sebaka, lebelo le ts'ireletso.
Ts'ireletso: E ts'ehetsa encryption le netefatso (mohlala, MIFARE®, DESFire®).
Maemo: ISO/IEC 14443, ISO/IEC 15693, NFC.

UHF (860–960MHz, Ultra-High Frequency)

Range: Ho fihlela ho limithara tse 10 (bolelele ba mefuta).
Lebelo la Data: Holimo haholo; e ka bala li-tag tse makholo ka nako e le 'ngoe.
Tshebetso: E molemo ka ho fetisisa bakeng sa ho bala le ho latedisa ka bongata, empa e sa tsitsang haufi le metsi/tshepe.
Tšireletso: E itekanetseng; mekhoa e mecha e ntlafatsa ts'ireletso empa e se matla joaloka HF bakeng sa tšebeliso ea lichelete.
Maemo: ISO/IEC 18000-6C (EPC Gen 2).

Maqephe a Inlay a Prelaminated (Prelam) ke afe?
 

Prelaminated Inlay Sheets, eo hape e bitsoang Prelam Inlays, ke lipampiri tsa mantlha tse lokiselitsoeng esale pele tse seng li na le li-antenna tse kentsoeng le li-microchips, tse entsoeng ka laminated ka hare ho thepa e tšoarellang joalo ka PVC, PET, kapa PETG.

Li sebetsa e le motheo o sebetsang oa ho etsa likarete tse bohlale tsa RFID, li etsa hore ts'ebetso ea tlhahiso e sebetse hantle, e tsitsitse ebile e ka tšeptjoa. Sebakeng sa ho kopanya li-chips le li-antenna ka thoko, baetsi ba likarete ba ka sebelisa li-inlay tsa prelam ka kotloloho, ebe ba li hatisa, ba li otla le ho qeta likarete ka li-overlays.

Lintlha tse ka Sehloohong tsa Prelam Inlay Sheets

Sebopeho se Kopanetsoeng - Chip le antenna li entsoe pele ho laminate ka har'a lakane.
High Durability - E hana mocheso, khatello le ho kobeha nakong ea lamination.
Ts'ebetso e tsitsitseng - E netefatsa khokahano e nepahetseng ea chip-to-antenna.
Ts'ebetso e Bonolo - E nolofatsa mehato e meng ea tlhahiso ea likarete joalo ka ho hatisa, ho phunya le ho iketsetsa motho.
Customizable - E fumaneha ka boholo bo fapaneng, maqhubu a fapaneng (125KHz, 13.56MHz, UHF), le meralo ea li-chip tse ngata.

Tšebelisano 'moho

Inlay FAQ

ea fektheri FAQ