Bi kariti dilanni baara min bɛ ka yiriwa teliya la, RFID prelam sɛbɛnw kɛra fɛn nafamaba ye walasa ka karti hakilitigi ɲumanw dilan. O sɛbɛnw bɛ kɛ fɛnba ye min bɛ RFID inlays — embedded chips and antennes — fara ɲɔgɔn kan ka kɛ PVC layers muɲulenw ye, o bɛ sira di ka kartiw dilan ka ɲɛ jamaba la minnu tɛ ɲɔgɔn sɔrɔ.
Inlay ye karti farikolo kɔnɔna ye, min bɛ Film overlay s cɛ. A tɛ i n’a fɔ Film overlay (min bɛ sanfɛla lakana), inlay bɛ karti jɔcogo dafalen sabati ani a bɛ se ka karti hakilitigi fɛɛrɛw fana bila i n’a fɔ RFID puwɛntiw ni antɛniw.
Karti hakilitigiw ka baarakɛyɔrɔ la, inlay suguya belebele fila bɛ yen: Core sheet Inlay s – Plain structural core for standard cards. RFID Prelam Inlay s – Kori sɛbɛnw minnu bɛ lamini ka kɔn ni RFID puwɛntiw ni antɛniw ye.
125KHz Inlay 13,56MHz Inlay
PVC PETG PC Inlay
Sani ka kɛ Inlay Sani ka kɔn ka kɛ
Inlay ka Karti dilanni na
PVC Core sheet Inlay s. Bamako, Mali
Ɲɛfɔli caman
PVC core sheet ye karti farikoloba ye.
A ka c’a la, a bɛ sandwich Film overlay filimu fila cɛ.
A dabɔra walasa ka muɲu, ka sabati, ani ka lamini nɔgɔya.
RFID Prelam Inlay s
Ɲɛfɔli caman
Inlay prelaminated bɛ antɛni ni puce dɔ fara ɲɔgɔn kan PVC sɛbɛnw kɔnɔ ka sɔrɔ ka lamination kɛ.
A bɛ kumaɲɔgɔnya kɛ min tɛ se ka ɲɔgɔn sɔrɔ bi karti hakilitigiw kama.
A dabɔra walasa ka muɲu kosɛbɛ ani ka don karti laban dilanni na cogo la min tɛ fɛn tiɲɛ.
125 kHz RFID Inlay s (Fɛrɛnkan dɔgɔman – LF ) .
125 kHz inlays ye RFID furaw ye minnu ka dɔgɔn, minnu bɛ kɛ ka caya baarakɛminɛnw na minnu bɛ kumaɲɔgɔnya kɛ waati kunkurunnin kɔnɔ, min bɛ se ka da a kan. U bɛ baara kɛ ka ɲɛ sigidaw la, nɛgɛ walima jilama bɛ yɔrɔ minnu na, yɔrɔ minnu na, fɔkan minnu ka bon, olu bɛ se ka dɛsɛ.
13,56 MHz RFID Inlay s (Fɛrɛnkanba – HF ) .
13,56 MHz inlays ye RFID furaw ye minnu bɛ se ka caya, minnu bɛ kunnafonidilanw seko ni lakana fɛɛrɛ ɲumanw di ka tɛmɛ LF inlays kan. O b’u kɛ sariya ye sarali ni tɛmɛsira siratigɛ la.
Shanghai Wallis Technology Co., Ltd. ye fɛn dilanni ni furakɛli ɲɛmɔgɔba ye min ka baara ɲɛsinnen bɛ RFID inlays, Film overlay fɛnw, ani karti dilanni minɛnw dilanni ma. Ni san caman dɔnniya ye karti hakilitigi fɛɛrɛbɔ la, Wallis ye tɔgɔba sɔrɔ ka ɲɛsin fɛnw dili ma minnu bɛ se ka da u kan, minnu ka ɲi kosɛbɛ, diɲɛ cikɛlaw dalen bɛ minnu na.
Wallis la, an bɛ inlay suguya caman dilan, i n’a fɔ: Core sheet Inlay s for standard card structures Antenna Inlay s (coil only, no chip) for flexible customization RFID Prelam Inlay s with embedded puce and antenna for ready-to-laminate applications
An ka inlays bɛ sɔrɔ frequences (fɔkanw) danfaralenw na – 125 kHz ( LF ), 13.56 MHz ( HF / NFC ), ani UHF – walasa ka sugu mago suguya caman ɲɛ, k’a ta dondaw kɔlɔsili n’u dɔnni na ka se bankiw, bolifɛnw, ani wari saracogo hakilitigiw ma.
Wallis------ Fɛn minnu bɛ kɛ
Wallis ka fɛn dilannenw bɛ da karti dilannikɛlaw fɛ, gɔfɛrɛnaman ka baarakɛyɔrɔw fɛ, bankiw fɛ ani sɛbɛnnikɛlaw fɛ jamana 50 ni kɔ kɔnɔ.
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.
Sɔngɔ bɛnnen Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.Ka tɛmɛ 10 kan fɛn dilanni sira tigitigi kan, min ka nɔgɔn ka fɛn caman sɔrɔ, ka sɔngɔ ɲuman di aw ma.
SGS, o ye jamana caman ka baarakɛda ye min sigiyɔrɔba bɛ Suwisi jamana na, min ka baara ɲɛsinnen bɛ sɛgɛsɛgɛli, sɛgɛsɛgɛli, sɛgɛsɛgɛli ani seereyaw baara ma. SGS Detection bɛ se ka kɛ kɛrɛnkɛrɛnnenya la u ka sekow ye ka fɛn suguya caman, nɔgɔw, walima fɛn suguya caman dɔn fɛn dilannenw, fɛnw walima sigidaw la ni sɛgɛsɛgɛli fɛɛrɛw ni fɛɛrɛ kɔrɔw ye. O bɛ se ka kɛ izini caman ye i n’a fɔ dumuni, furakɛli, kemikɛli, sigida, ani fɛn wɛrɛw.
Rapport min bɛ sɛgɛsɛgɛli kɛ
485*295*0,1mm ye
485*295*0,15mm ye
485*295*0,32mm ye
485*295*0,76mm ye
Faamuyali Inlay Sɛbɛn
Inlay sheet ye cɛmancɛfɛn ye min labɛnna kɛrɛnkɛrɛnnenya la, min bɛ kɛ karti dilanni na (i n’a fɔ ID kartiw, smart cards, banki kartiw, tɔndenw ka kartiw, walima RFID kartiw). A ka c’a la, a bɛ kɛ i n’a fɔ karti kɔnɔna jɔcogo, min bɛ bila Film overlay filimuw cɛ lamini waati.
Inlay sheet bɛ karti ka baarakɛcogo jɔnjɔn caman n’a nafaw dantigɛ, i n’a fɔ a muɲuli, a bɛ se ka fɛn caman sɛgɛsɛgɛ, ani a dɔw la, a bɛ se ka baara kɛ ni ɛntɛrinɛti ye ni a donna ni RFID yɔrɔw ye.
Inlay Sɛbɛn suguyaw
PVC Inlay Sɛbɛn gansanw dilannen don ni PVC plastiki jɔnjɔn ye. Aw bɛ kɛ karti jɔcogo basigilen ye ni ɛntɛrinɛti baara tɛ. A ka ca a la, a bɛ kɛ karti sɛbɛnnen nɔgɔmanw na (kantigiya kartiw, kalandenw ka kartiw, tɔndenw ka kartiw).
RFID / Contactless Inlay Sɛbɛnw
Kupu antɛniw ni mikropuce (mikɔrɔpuce) minnu bɛ don a kɔnɔ, olu bɛ sɔrɔ a kɔnɔ. Aw bɛ se ka fɛɛrɛw tigɛ minnu tɛ ɲɔgɔn sɔrɔ i n’a fɔ 125KHz, 13.56MHz, walima UHF fɔkanw. A bɛ baara kɛ ni dondaw kɔlɔsili kartiw ye, bolifɛnw kartiw, wari sarali kartiw, ani NFC -seginfɛnw na.
prelam inated ( prelam ) Inlay Sɛbɛnw
Inlays minnu labɛnna ka kɔn ni antɛniw ni puwɛntiw ye minnu lamininen don kaban PVC walima PETG sɛbɛnw kɔnɔ. Aw bɛ fanga caman di ani ka baara wɛrɛw nɔgɔya (sɛbɛnni, punching). A bɛ kɛ kosɛbɛ izini ka karti dilanni na.
jirali PVC Inlay Sɛbɛn jɛlenw
Plain PVC Inlay Sɛbɛnw ye basigilenw ye minnu bɛ kɛ karti dilanni na. U dilannen don ni polivinili kuloridi ( PVC ) fɛn ye min tɛ ni ɛntɛrinɛti yɔrɔ si ye i n’a fɔ puwɛnti walima antɛni. U jɔyɔrɔ fɔlɔ ye ka kɛ karti jɔcogo jusigilan ye, ka fanga di, ka muɲu, ani ka yɔrɔ nɔgɔlen di walasa ka lamini wɛrɛ kɛ, ka sɛbɛnni kɛ, walima ka kɛ mɔgɔ yɛrɛ ta ye.
O sɛbɛnw bɛ bila Film overlay filimuw ni ɲɔgɔn cɛ lamini kɛcogo la, yɔrɔ min na funteni ni degun bɛ layiniw fara ɲɔgɔn kan ka kɛ karti dafalen ye.
Nafa minnu bɛ PVC Inlay sɛbɛnw na
Muɲu – Sugandili min sɔngɔ ka nɔgɔn ni i y’a suma ni RFID walima ɛntɛrinɛti inlays ye. Versatile – A bɛnnen don karti suguya caman ma, k’a ta IDw la ka taa a bila promotion kartiw la. A bɛ mɛn – A bɛ se ka kɔrɔta, ka kari, ani ka don o don sɛgɛn. A bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye – A bɛ se ka dilan ni bonya, a bonya, ani a kulɛriw tɛ kelen ye ka kɛɲɛ ni kiliyanw magow ye. A bɛ bɛn ni sɛbɛnni ye – A bɛ baara kɛ ka ɲɛ ni offset sɛbɛnni ye, ɛkran sɛbɛnni, nizɛri sɛbɛnni, ani lamination.
RFID / Contactless Inlay Sɛbɛnw ye mun ye?
RFID (Radio Frequency Identification) / Contactless Inlay Sɛbɛnw ye sɛbɛn kolomaw ye minnu dilannen don kɛrɛnkɛrɛnnenya la, minnu kɔnɔ, ɛntɛrinɛti yɔrɔw bɛ don u kɔnɔ—i n’a fɔ antɛni bobinew ani mikropucew—minnu b’a to kartiw bɛ se ka kumaɲɔgɔnya kɛ ni telefɔni ye.
O inlay sheets ye karti hakilitigiw dusukun baarakɛta ye minnu tɛ ɲɔgɔn sɔrɔ, o b’a to u bɛ se ka kunnafoniw mara ani k’u ci k’a sɔrɔ u ma ɲɔgɔn sɔrɔ farikolo la. U bɛ baara kɛ kosɛbɛ dondaw kɔlɔsili, bolifɛnw, banki, ani NFC baarakɛcogo la.
125KHz (Fɛrɛnkan dɔgɔman – LF ) .
A janya: santimɛtɛrɛ 2–10 (a janya ka surun). Donanw teliya: A bɛ kɛ dɔɔni dɔɔni, hakilijagabɔ seko danma. Baara kɛcogo: A bɛ baara kɛ ka ɲɛ nɛgɛ, ji ani sigida gɛlɛnw kɛrɛfɛ. Lakanali: Basic, a tɛ siri; a bɛnnen don kosɛbɛ dantigɛli nɔgɔman ma. Musaka: A ka c’a la, a ka dɔgɔ ni HF ani UHF .
13,56MHz (Fɛrɛnkanba – HF / NFC ) .
A bɛ se ka kɛ santimɛtɛrɛ 10 ye. Donanw teliya: A teliya ka tɛmɛ LF kan, a bɛ kunnafonidilanw maracogo gɛlɛnw dɛmɛ. Baara kɛcogo: Balan ɲuman min bɛ kɛ ni yɔrɔ ye, a teliya ani a lakanani. Lakanali: A bɛ dɛmɛ don kodɔn & dantigɛli (misali la, MIFARE®, DESFire®). Sariyasunw: ISO /IEC 14443, ISO /IEC 15693, NFC .
UHF (860–960MHz, Fɛrɛnkan min ka bon kosɛbɛ)
A janya: A bɛ se mɛtɛrɛ 10 ma (a janya). Donanw teliya: A ka bon kosɛbɛ; bɛ se ka taamasiyɛn kɛmɛ caman kalan siɲɛ kelen. Baara kɛcogo : A ka fisa ka kalan caman kɛ ani ka tugu ɲɔgɔn kɔ, nka a tɛ sabati kosɛbɛ jilama/nɛgɛ kɛrɛfɛ. Lakanali: A bɛ dantɛmɛ; protocol kura bɛ lakana yiriwa nka u barika man bon i n’a fɔ HF wariko baara kama. Sariyasunw: ISO /IEC 18000-6C (E PC Jɛnkulu 2).
prelam inated ( prelam ) Inlay Sɛbɛnw ye mun ye?
prelam inated Inlay Sɛbɛnw, n’u bɛ wele fana ko Inlay prélaminé s, olu ye karti kɔnɔna sɛbɛnw ye minnu labɛnna ka kɔn, antɛniw ni mikropuwɛntiw bɛ minnu kɔnɔ kaban, minnu lamininen don fɛnw kɔnɔ minnu bɛ mɛn i n’a fɔ PVC , PET , walima PETG
U bɛ kɛ baarakɛyɔrɔ ye RFID karti hakilitigiw dilanni na, ka kɛ sababu ye ka baara kɛcogo ɲɛ, ka sabati, ani ka da a kan. Sani u ka puwɛntiw ni antɛniw fara ɲɔgɔn kan, karti dilannikɛlaw bɛ se ka baara kɛ ni prelam inlays ye k’a ɲɛsin u ma, o kɔfɛ, ka kartiw sɛbɛn, ka u punch, ka u ban ni Film overlay s ye.
Inlay prélaminé Sɛbɛnw ka fɛn kolomaw
Integrated Structure – Puce ni antenne bɛ kɔn ka lamini sɛbɛn kɔnɔ. A bɛ mɛn kosɛbɛ – A bɛ se ka funteni, degun, ani kurukuruni kunbɛn lamini waati. Baara sabatili – A bɛ a to puwɛnti ni antɛni sirili ni ɲɔgɔn cɛ ka ɲɛ. Baara nɔgɔn – A bɛ karti dilanni fɛɛrɛ wɛrɛw nɔgɔya i n’a fɔ sɛbɛnni, punching, ani personalization. A bɛ se ka ladilan – A bɛ sɔrɔ hakɛw, frequences (125KHz, 13.56MHz, UHF ), ani puce caman dilancogo la.
Ɔwɔ, PETG Film overlay s bɛ se ka kɛ fɛn caman ye, wa u bɛ se ka kɛ karti suguya caman kan. I mana viziti kartiw dilan, ID kartiw, tɔndenw ka kartiw, walima jago kartiw, PETG Film overlay s bɛ layɛrɛ lakanani ni polisilen di. U bɛ bɛn fana ni inkjet ni laser sɛbɛnnikɛlanw ye, o b’a to u bɛnnen don karti dilanni baara caman ma.
Ɔwɔ, PETG Film overlay s bɛ se ka kɛ fɛn caman ye, wa u bɛ se ka kɛ karti suguya caman kan. I mana viziti kartiw dilan, ID kartiw, tɔndenw ka kartiw, walima jago kartiw, PETG Film overlay s bɛ layɛrɛ lakanani ni polisilen di. U bɛ bɛn fana ni inkjet ni laser sɛbɛnnikɛlanw ye, o b’a to u bɛnnen don karti dilanni baara caman ma.
PETG Film overlay ye plastiki filimu jɛlen ye min bɛ kɛ kariti dilanni na walasa ka muɲuli ni cɛɲi sabati. A bɛ kɛ karti sɛbɛnnenw kan walasa k’u tanga sɛgɛn ni tiɲɛni ma ka sɔrɔ ka fini dɔ fara a kan min bɛ manamana, min bɛ kɛ ni baarakɛla ŋana ye. Nin Film overlay in dilannen don ni PETG (Polyethylene Terephthalate Glycol) ye, o ye polimɛri ye min ka ɲi kosɛbɛ, min bɛ dɔn a jɛlen n’a fanga fɛ.
Kunnafoni jɔnjɔnw:
PETG Film overlay ye plastiki filimu jɛlen ye.
A bɛ karti muɲuli ni a yecogo ɲɛ.
A dilannen don ni PETG , n’o ye thermoplastique barikama ye ani min jɛlen don.
PVC karti minɛnw bɛ kɛ ka ɲɛsin mɔgɔya kartiw ma, wari sarali kartiw, kantigiya ni sara kartiw, kado kartiw, ko kɛlenw ni tikiti kartiw, lotɛli kilisi kartiw, ani bolifɛnw kartiw.
PVC kartiw bɛ muɲuli ni fɛn caman di walasa ka u minɛ tuma caman na ani ka u sɛgɛn.
U bɛ se ka fɛɛrɛ suguya caman don u kɔnɔ, i n’a fɔ magɛnni sɛrɛkiliw, EMV puwɛntiw, RFID / NFC , ani barɔdi walima QR kode, ka da baarakɛcogo wajibiyalenw kan
PVC kartiw, n’a bɛ fɔ fana ko polivinili kuloridi kartiw, olu bɛ dilan fɔlɔ ni plastiki sugu dɔ ye min bɛ wele ko polivinili kuloridi. PVC ye polimɛri sintetiki ye min bɛ kɛ ka caya, min lakodɔnnen don a ka muɲuli, a bɛ se ka wuli, ani a bɛ se ka ji ni kemikɛlifɛnw kɛlɛ. A bɛ kɛ ka caya baarakɛminɛn suguya caman na, i n’a fɔ ID kartiw, kartiw, tɔndenw ka kartiw ani don kartiw.
WALLIS PLASTIC A bɛ fura kelen di Karti minɛn s suguya bɛɛ ma, an bɛ kiliyan kelen-kelen bɛɛ ka ɲinini kɛrɛnkɛrɛnnenw ɲɛnabɔ ani ka fɛnw bɛrɛbɛn walasa ka na ni karti ye min b’u magow ɲɛ.
Shanghai Wallis Technology Co., Ltd ye baarakɛla ŋana ye min bɛ ni izini 7 ye walasa ka Plastiki sɛbɛnw, Plastiki filimu, Karti Base Material, Karti suguya bɛɛ, ani Custom Fabrication Service di Plastiki fɛn dilannenw ma.
