More Language

IWholesale  Prelam Inlay yeKhadi

125KHz Inlay/ 13.56MHz Inlay 
Kumashishini anamhlanje avela ngokukhawuleza okwenziwa kwamakhadi, amaphepha e-RFID prelam abe yinxalenye ebalulekileyo yokuvelisa amakhadi akumgangatho ophezulu. La maphepha asebenza njengesakhiwo esingundoqo esidibanisa i-RFID inlays - iitshiphusi ezifakwe ngaphakathi kunye ne-eriyali - kwimigangatho ye-PVC ehlala ixesha elide, evumela ukuveliswa kobunzima obusebenzayo bamakhadi angenakuqhagamshelwa.

Wallis-Ekhokelayo Prelam Inlay  Manufacturer

 Malunga Malunga ne-Inlay

I-inlay ngumaleko wangaphakathi womzimba wekhadi, ophakathi kwezinto ezingaphezulu. Ngokungafaniyo nesigqubuthelo (esikhusela umphezulu), i-inlay iqinisekisa ukuthembeka kolwakhiwo lwekhadi kwaye inokugcina itekhnoloji yekhadi le-smart elifana neetshiphusi ze-RFID kunye nee-eriyali.
Kwishishini lamakhadi e-smart, kukho iindidi ezimbini eziphambili zokufakwa kwe-inlay:
I-Core Sheet Inlays - I-Plain structural core yamakhadi aqhelekileyo.
I-RFID Prelam Inlays - Amaphepha angundoqo afakwe ngaphambili kunye ne-RFID chips kunye nee-eriyali.
 125KHz Inlay   13.56MHz Inlay
 PVC PETG PC Inlay
 I-Pre-Inlay    I-Pre-prelam

Inlay kwi-Card Manufacturing

PVC Core Sheet Inlays

Inkcazo ngokubanzi

I-PVC core sheet ngumzimba oyintloko wekhadi.
Ngokuqhelekileyo ifakwe phakathi kweefilimu ezimbini ezingaphezulu.
Yenzelwe ukuqina, uzinzo, kunye nokulula ukuthambisa.
 

RFID Prelam Inlays

Inkcazo ngokubanzi

I-inlay efakwe ngaphambili idibanisa i-eriyali kunye ne-chip ngaphakathi kwamaphepha e-PVC ngaphambi kokuba i-lamination.
Ibonelela ngonxibelelwano olungaqhagamshelwanga kumakhadi anamhlanje ahlakaniphile.
Yenzelwe ukuqina okuphezulu kunye nokufakwa ngaphandle komthungo kwimveliso yekhadi lokugqibela.
 

125 kHz RFID Inlays (I-Frequency ephantsi – LF)

I-125 kHz inlays zizisombululo ze-RFID eziphantsi-frequency ezisetyenziswa ngokubanzi kwizicelo ezifuna uluhlu olufutshane, unxibelelwano oluthembekileyo. Basebenza kakuhle kwiindawo ezinokuphazamiseka kwesinyithi okanye ulwelo apho amaza aphezulu anokusilela.
 

13.56 MHz RFID Inlays (High Frequency – HF)

I-13.56 MHz inlays zizisombululo ze-RFID eziphezulu ze-frequency, ezinikezela umthamo wedatha engcono kunye neempawu zokhuseleko kune-LF inlays. Oku kubenza umgangatho wentlawulo kunye neenkqubo zokuthutha.
 

Malunga neWallis :UMvelisi oThenjiweyo woMgangatho wokuLayika oPhezulu

Ungandwendwela umzi-mveliso waseWallis eTshayina, uMboneleli oPhezulu kunye noMvelisi
I-Shanghai Wallis Technology Co., Ltd. ngumenzi okhokelayo kunye nomboneleli wesisombululo okhethekileyo kwimveliso ye-RFID inlays, izinto ezingaphezulu, kunye nezixhobo zokwenza amakhadi. Ngeminyaka yobuchwephesha kwitekhnoloji yekhadi le-smart, iWallis izenzele igama eliqinileyo ngokuzisa iimveliso ezithembekileyo, ezikumgangatho ophezulu ezithenjwa ngabathengi behlabathi.
 
E-Wallis, sivelisa uluhlu olubanzi lwezinto ezifakwe ngaphakathi, ezibandakanya:
I-Core Sheet Inlays yezakhiwo zekhadi eziqhelekileyo
I-Antenna Inlays (ikhoyili kuphela, akukho chip) ukwenzela ukulungelelanisa okuguquguqukayo
I-RFID ye-Prelam Inlays kunye ne-chip edibeneyo kunye ne-eriyali ukwenzela ukulungelelaniswa kwezicelo.
 
Ukufakwa kwethu kufumaneka kwii-frequencies ezahlukeneyo - 125 kHz (LF), 13.56 MHz (HF / NFC), kunye ne-UHF - ukuhlangabezana neemfuno zeemarike ezahlukeneyo, ukusuka kulawulo lokufikelela kunye nokuchongwa ukuya kwiibhanki, ukuthutha, kunye neenkqubo zokuhlawula ezihlakaniphile.
 

Wallis------ Iimveliso

Iimveliso zaseWallis zithenjwa ngabavelisi bamakhadi, iiarhente zikarhulumente, iibhanki namaziko okushicilela kumazwe angaphezu kwama-50.

Ukusetyenziswa kwe-Prelam Inlay yeKhadi

Ikhadi legumbi
Ikhadi lokuGada lokungena
Ikhadi le-Epoxy Resin
Ikhadi leChip
  • 3
  • 1
  • 2
Ixabiso elinengqiqo Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle kakhulu.Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle.
  • 3
  • 1
  • 2
Ixabiso elinengqiqo Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle kakhulu.Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle.
  • 3
  • 1
  • 2
Ixabiso elinengqiqo Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle kakhulu.Ngaphezu kwe-10 yomgca wokuvelisa ochanekileyo, kulula ukuqonda ubuninzi bempahla, ukubonelela ngexabiso elihle.

Ukufunyanwa kwe-SGS

 
I-SGS, inkampani yezizwe ngezizwe enekomkhulu eSwitzerland egxile ekuhloleni, ekuqinisekiseni, ekuvavanyeni, nakwiinkonzo zesiqinisekiso. Ukufunyanwa kwe-SGS kunokubandakanya ngokukodwa amandla abo ekubhaqeni izinto ezahlukeneyo, ungcoliseko, okanye ukungaqhelekanga kwiimveliso, imathiriyeli, okanye imekobume kusetyenziswa iindlela zovavanyo olukwizinga eliphezulu kunye nobuchwepheshe. Oku kunokubandakanya uluhlu olubanzi lwamashishini kubandakanya ukutya, amayeza, iikhemikhali, okusingqongileyo, nokunye.

Ukuphonononga ingxelo

  • 0
     
    485*295*0.1mm
  • 0
     
    485*295*0.15mm
  • 0
     
    485*295*0.32mm
  • 0
     
    485*295*0.76mm

Ukuqonda i-Inlay Sheet

 

Ishiti langaphakathi lisisixhobo esiphakathi esilungiselelwe ngokukodwa esisetyenziswa ekwenzeni amakhadi (afana namakhadi esazisi, amakhadi ahlakaniphileyo, amakhadi ebhanki, amakhadi obulungu, okanye amakhadi eRFID). Ngokuqhelekileyo isebenza njengesiseko esisisiseko sekhadi, esibekwe phakathi kweefilimu ezigqithisiweyo ngexesha lokuqhawula.

 

Iphepha elifakwe kwi-inlay limisela imisebenzi emininzi ephambili yekhadi kunye neempawu, kubandakanya ukuqina, ukuguquguquka, kwaye kwezinye iimeko, ukusebenza kwe-elektroniki ukuba kufakwe kumacandelo e-RFID.

 

Iindidi zaMashiti afakweyo

Plain PVC Inlay Sheets
Yenziwe kwiplastiki PVC eqhelekileyo.
Khonza njengesiseko sekhadi ngaphandle komsebenzi we-elektroniki.
Ngokuqhelekileyo isetyenziswe kumakhadi aprintiweyo alula (amakhadi okunyaniseka, amakhadi omfundi, amakhadi obulungu).

 

I-RFID / Iishiti zokuNgena eziNgenamnxibelelwano

Ziqulathe ii-eriyali zethusi kunye neemicrochips.
Yenza itekhnoloji yoqhagamshelwano isebenze njenge-125KHz, 13.56MHz, okanye i-UHF frequencies.
Isetyenziswa kumakhadi olawulo lokufikelela, amakhadi othutho, amakhadi entlawulo, kunye neemveliso ezinikwe iNFC.

 

I-Prelaminated (Prelam) ii-Inlay Sheets

I-inlay ezilungiselelwe kwangaphambili kunye nee-eriyali kunye neetshiphusi ezisele zilayitiwe ngaphakathi kwe-PVC okanye i-PETG sheets.
Ukubonelela ngamandla aphezulu kunye nokuqhubekela phambili ngokulula ngakumbi (ukushicilela, ukubethelela).
Isetyenziswa ngokubanzi kwimveliso yekhadi loshishino.

 
 

Ukwazisa iPVC ePlain Inlay Sheets

 

I-PVC yePVC engenanto yaMaleko yimigangatho engundoqo esetyenziswa kwimveliso yamakhadi. Zenziwe nge-polyvinyl chloride (PVC) imathiriyeli ngaphandle kwezixhobo ze-elektroniki ezifana neetshiphusi okanye ii-eriyali. Indima yabo ephambili kukusebenza njengesiseko sekhadi, ukunika amandla, ukuqina, kunye nomphezulu ogudileyo wokuqhubela phambili ukulanyiswa, ukushicilela, okanye ukwenziwa komntu.

La maphepha afakwe phakathi kweefilimu ezigqithisiweyo ngexesha lenkqubo yokucoca, apho ubushushu kunye noxinzelelo ludibanisa iileyile kwikhadi eligqityiweyo.

 

Izinto eziluncedo kwiPVC ePlain yaMashiti okufakwayo


Ixabiso Elisebenzayo - Inketho efikelelekayo ngakumbi xa kuthelekiswa ne-RFID okanye i-electronic inlays.
Okuguquguqukayo-Izilungele iintlobo ezininzi zamakhadi, ukusuka kwii-ID ukuya kumakhadi okuthengisa.
Yomelele-Ukumelana nokugoba, ukuqhekeka, kunye nokunxiba kwemihla ngemihla.
I-Customizable -Inokuveliswa ngobukhulu obuhlukeneyo, ubukhulu, kunye nemibala ngokusekelwe kwiimfuno zabaxhasi.
Iyahambelana noShicilelo-Isebenza kakuhle kunye noshicilelo lwe-offset, ushicilelo lwesikrini, ushicilelo lwedijithali, kunye ne-lamination.
 

 

Yintoni i-RFID / i-Inlay Sheets engaQhagamshelwanga?
 

I-RFID (I-Radio Frequency Identification) / Ii-Spackless Inlay Sheets ziyilwe ngokukodwa amaphepha angundoqo aqulethe izinto ezifakwe kwi-elektroniki-ezifana neekhoyili ze-antenna kunye ne-microchips-ezivumela amakhadi ukuba enze unxibelelwano olungenacingo.

La maphepha afakwe kwi-inlay yintliziyo esebenzayo yamakhadi e-smart ngaphandle koqhagamshelwano, ebenza bakwazi ukugcina kunye nokuhambisa idatha ngaphandle koqhagamshelwano lomzimba. Zisetyenziswa ngokubanzi kulawulo lofikelelo, ezothutho, zebhanki, kunye nezicelo ze-NFC.

 

125KHz (Izandi eziphantsi – LF)


Uluhlu: 2-10 cm (uluhlu olufutshane).
Isantya seDatha: Imemori ecothayo, encinci.
Ukusebenza: Isebenza kakuhle kufutshane nentsimbi, amanzi, kunye neendawo ezinomngeni.
Ukhuseleko: Undoqo, hayi uguqulelo oluntsonkothileyo; ilungele ngakumbi ukuchonga okulula.
Iindleko: Ngokubanzi zisezantsi xa kuthelekiswa ne-HF kunye ne-UHF.

 

13.56MHz (Izakhelo eziPhezulu – HF / NFC)


Uluhlu: Ukuya kuthi ga kwi-10 cm.
Isantya seDatha: Ngokukhawuleza kune-LF, isekela ukugcinwa kwedatha eyinkimbinkimbi.
Ukusebenza: Ibhalansi elungileyo yoluhlu, isantya, kunye nokhuseleko.
Ukhuseleko: Ixhasa i-encryption kunye nokuqinisekiswa (umzekelo, i-MIFARE®, i-DESFire®).
Imigangatho: ISO/IEC 14443, ISO/IEC 15693, NFC.

 

UHF (860–960MHz, iFrequency ephezulu kakhulu)


Uluhlu: Ukuya kwi-10 yeemitha (uluhlu olude).
Isantya seDatha: Iphezulu kakhulu; inokufunda amakhulu ethegi ngexesha elinye.
Ukusebenza: Eyona nto ibhetele yokufunda isambuku kunye nokulandela umkhondo, kodwa izinzile kancinci kufutshane nolwelo/isinyithi.
Ukhuseleko: Phakathi; Iiprothokholi ezintsha ziphucula ukhuseleko kodwa azinamandla njenge-HF yokusetyenziswa kwemali.
Imigangatho: ISO/IEC 18000-6C (EPC Gen 2).

 

 

 

Yintoni i-Prelaminated (Prelam) Inlay Sheets?
 

I-Prelaminated Inlay Sheets, ekwabizwa ngokuba yi-Prelam Inlays, ngamakhadi aphambili asele elungiselelwe asele equlethe i-eriyali edibeneyo kunye ne-microchips, i-laminated ngaphakathi kwezinto eziphathekayo ezifana ne-PVC, i-PET, okanye i-PETG.

Basebenza njengesiseko esisebenzayo sokwenza amakhadi e-RFID ahlakaniphile, okwenza inkqubo yokuvelisa isebenze ngakumbi, izinzile kwaye ithembekile. Endaweni yokudibanisa iitshiphusi kunye nee-eriyali ngokwahlukeneyo, abavelisi bamakhadi banokusebenzisa ngokuthe ngqo ii-prelam inlays, emva koko baprinte, babethe, bagqibezele amakhadi ngokungaphezulu.

 

Iimpawu eziphambili ze-Prelam Inlay Sheets


Ulwakhiwo oluDityanisiweyo – I-Chip kunye ne-eriyali zi-laminated kwangaphambili ngaphakathi kwephepha.
Ukuqina okuphezulu - Ukuxhathisa ubushushu, uxinzelelo, kunye nokugoba ngexesha lokulanyiswa.
UkuSebenza okuZinzileyo -Ukuqinisekisa ukubophelela okufanelekileyo kwe-chip-to-antenna kunye nokulungelelaniswa.
Ukucutshungulwa ngokulula-Yenza lula amanye amanyathelo okuvelisa amakhadi njengokuprinta, ukubethelwa ngenqindi, kunye nokwenza umntu.
Customizable - Ifumaneka ngokobukhulu obahlukeneyo, amaza (125KHz, 13.56MHz, UHF), kunye noyilo lweetshiphu ezininzi.

 

    

Inkqubo yeNtsebenziswano

Qhagamshelana nathi
形状结合
形状结合备份
  • <span style='font-size:26px;'><strong>Wechat</strong></span>
  • <strong><span style='font-size:26px;'>Linkedin</span></strong>
  • <strong><span style='font-size:26px;'>WhatsApp</span></strong>

INlay FAQ

  • Ngaba i-PETG iyabekeka, kwaye ingaba ikhusela amakhadi ngokufanelekileyo?

    Ewe, ii-PETG ezingaphezulu ziyaguquguquka kwaye zinokusetyenziswa kwiindidi ezahlukeneyo zamakhadi. Nokuba wenza amakhadi eshishini, amakhadi esazisi, amakhadi obulungu, okanye amakhadi okurhweba, ii-PETG ezingaphezulu zibonelela ngokhuseleko kunye nocweyo olukhazimlisiweyo. Zikwahambelana zombini ii-inkjet kunye neeprinta ze-laser, ezizenza zilungele uluhlu olubanzi lweeprojekthi zokwenza amakhadi.

  • Ngaba i-PETG iyalekeka ingasetyenziswa kwiintlobo ezahlukeneyo zamakhadi?

    Ewe, ii-PETG ezingaphezulu ziyaguquguquka kwaye zinokusetyenziswa kwiindidi ezahlukeneyo zamakhadi. Nokuba wenza amakhadi eshishini, amakhadi esazisi, amakhadi obulungu, okanye amakhadi okurhweba, ii-PETG ezingaphezulu zibonelela ngokhuseleko kunye nocweyo olukhazimlisiweyo. Zikwahambelana zombini ii-inkjet kunye neeprinta ze-laser, ezizenza zilungele uluhlu olubanzi lweeprojekthi zokwenza amakhadi.

  • Yintoni i-PETG yokwaleka, kwaye isetyenziswa njani ekwenzeni amakhadi?

    Ukwaleka kwe-PETG yifilimu yeplastiki ecacileyo esetyenziswa ekwenzeni amakhadi ukuqinisa ukuqina kunye nobuhle. Isetyenziswa phezu kwamakhadi ashicilelweyo ukuwakhusela ekunxibeni nasekukrazuleni ngelixa wongeza i-glossy, isiphelo sobugcisa. Olu lwalekayo lwenziwe kwi-PETG (i-Polyethylene Terephthalate Glycol), i-polymer ekumgangatho ophezulu we-thermoplastic eyaziwa ngokucaca kunye namandla.

    Ulwazi oluphambili:

    1. Ukwaleka kwe-PETG yifilimu yeplastiki ecacileyo.
    2. Iphucula ukuqina kwekhadi kunye nenkangeleko.
    3. Yenziwe kwi-PETG, i-thermoplastic eyomeleleyo kwaye ecacileyo.

  • Ingasetyenziswa phi imathiriyeli yekhadi lePVC?

    1. Izinto zekhadi lePVC zisetyenziselwa ukuchongwa kwamakhadi, amakhadi okuhlawula, ukunyaniseka kunye nemivuzo yamakhadi, amakhadi esipho, amakhadi esiganeko kunye namatikiti, amakhadi asehotele, kunye namakhadi okuthutha.
    2. Amakhadi e-PVC anika ukuqina kunye nokuguquguquka kokuphathwa rhoqo kunye nokuguga.
    3. Banokubandakanya ubugcisa obahlukeneyo, njengemigca yemagnethi, iitshiphusi ze-EMV, iRFID/NFC, kunye neekhowudi zebhakhowudi okanye iikhowudi zeQR, ngokusekwe kwiimfuno zesicelo.

  • Ziziphi iingenelo zemathiriyeli yekhadi lesilo-qabane?

    1. Amakhadi e-PET alungele indalo kwaye ayarisayikilishwa.
    2. Zomelele kakhulu kwaye zixhathisa ukunxitywa kunye nokukrazula.
    3. Izinto ze-PET zibonelela ngokugqwesileyo ngokugqwesileyo kushicilelo olucacileyo noludlamkileyo.
    4. Amakhadi e-PET abonisa ukuchasana okunamandla kwiikhemikhali, i-oyile kunye nezinyibilikisi.

  • Amakhadi ePVC enziwe ngantoni?

    Amakhadi e-PVC, awaziwa ngokuba ngamakhadi e-polyvinyl chloride, enziwa ikakhulu kuhlobo lweplastiki ebizwa ngokuba yi-polyvinyl chloride. I-PVC yipolymer eyenziwe ngokubanzi esetyenziswa ngokubanzi eyaziwa ngokuhlala kwayo, ukuguquguquka, kunye nokumelana nokufuma kunye neekhemikhali. Iqhele ukusetyenziswa kwizicelo ezahlukeneyo, kubandakanya amakhadi esazisi, amakhadi okuthenga ngetyala, amakhadi obulungu, kunye namakhadi okufikelela.

  • Uzithenga phi izinto zeKhadi?

    I-WALLIS PLASTIC Ibonelela ngesisombululo esisodwa kuzo zonke iintlobo zeMathiriyeli yeKhadi, sijongana neemfuno ezithile zomthengi ngamnye kwaye sihlengahlengise izixhobo zokuza nekhadi elizalisekisa iimfuno zabo.

Factory FAQ

Qala iProjekthi yakho kunye nathi

Sebenzisa iNtelekelelo yethu yoBugcisa
I-Shanghai Wallis Technology Co., Ltd ngumboneleli oqeqeshiweyo onezityalo ezisi-7 ukunika iPhepha lePlastiki, iFilimu yePlastiki, iMaterial yeSiseko seKhadi, zonke iindidi zaMakhadi, kunye neNkonzo yokuFakwa ngokweSiko kwiiMveliso zePlastiki ezigqityiweyo.

Iimveliso

Amakhonkco aKhawulezayo

Qhagamshelana
      sales@wallis-plastic.com
+86    13584305752
  No.912 YeCheng Road, indawo Jiading Industry, Shanghai
© COPYRIGHT 2026 SHANGHAI WALLIS TECHNOLOGY CO.,LTD. ONKE AMALUNGELO AGCINIWE.