|
WLS-ABS we dɛn kɔl WLS
WALLIS
| Sayz: | |
|---|---|
| Tiknes: | |
| Kwantiti: | |
Wallis ABS dijital printin shit na wan tɛmplastik shit we de te, we nɔ de ambɔg impak we dɛn mek fɔ dijital printin, advatayzmɛnt displei, tɛmɔfɔmin, vaykum fɔm, ikwipmɛnt haus, bag shel, panɛl, protɔtayp ɛn kɔstɔmayz plastic fabrikeshɔn. I kɔmbayn rigiditi, tafnɛs ɛn prɔsesin fleksibiliti de mek ABS na prɛktikal matirial fɔ B2B printa, tɛmɔfɔma, sayn manifakta ɛn industrial plastic fabricatɔ.
ABS, ɔ acrylonitrile butadiene styrene , na opaque amorphous thermoplastic we de gi gud dimɛnshɔnal stebiliti, ay impak trɛnk ɛn fayn fayn fɔmabiliti. Dɛn kin print, kɔt, rout, drɔl, bon, thermoform ɛn mek di rayt gred dɛn to kɔmpɔnɛnt dɛn we dɔn fɔ kɔmɛshɔnal ɛn industrial aplikeshɔn dɛn.
Wallis de saplae wayt, blak ɛn kɔstɔmayt kɔlɔ ABS shit dɛn we tik lɛk 0.5–13 mm , wit standad 1220 × 2440 mm shit ɛn kɔstɔmayz dimɛnshɔn. Smɔl, tɛkstɔr, ɛmbos ɛn patɛn sɔfays dɛn de akɔdin to di prɔjek rikwaymɛnt dɛn. Printing kompitibiliti fɔ validet wit di intended printa, ink sistem ɛn surface spesifikeshɔn bifo mas prodakshɔn.
| Di Nem fɔ Prodak | ABS Sheet / ABS Dijital Printin Shit |
| Tin dɛn | Akrilonitril Butadiɛn Stayrin (ABS) . |
| Raw Material we dɛn kɔl | 100% Virgin ABS Material we yu go yuz |
| Kɔlɔ | Wait, blak ɔ kɔstɔmayt kɔlɔ |
| Tik we i tik | 0,5–13 mm |
| Standart Sayz | 1220 × 2440 mm |
| Maksimal Width we pɔsin kin gɛt | כp to lεk 2500 mm akɔdin to di prכdak dεskrεpshכn we de naw; wida spesifikeshɔn dɛn fɔ kɔnfɔm bifo yu ɔda |
| Lɔng | Customized akɔdin to di projɛkt rikwaymɛnt dɛn |
| Fɔmat fɔ di Sapɔt | Shit; rol avaylabl dipen pan tik, gred ɛn prodakshɔn fisibiliti |
| Sho | Smɔl, tɛkstɔr, ɛmbos ɔ patɛn |
| Fɔ print | Dijital printin we dɛn de print; UV ɛn skrin-printin fit fɔ kɔnfɔm wit di sɔfays ɛn ink sistem we yu dɔn pik |
| Di we aw dɛn de du di wok | Tɛmofɔmin, vaykum fɔm, kɔt, CNC routin, drɔlin, bɔnd ɛn fabrikeshɔn |
| Tipik Aplikeshɔn dɛn | Advatayzmɛnt displei, sayn kɔmpɔnɛnt dɛn, haus, bag shel, tre, panɛl, protɔtayp ɛn pat dɛn we dɛn mek na di industri |
Fɔ print ɔ thermoforming projɛkt, di wan dɛn we de bay fɔ spɛsifa bak di sheet flatnɛs we dɛn nid, kɔlɔ, sɔfays tɛkstɔr, tiknɛs tolɛreshɔn, dimɛnshɔnal tolɛreshɔn ɛn ɛni prɔjek-spɛsifi k impak, flame-retardant, UV ɔ ɔda funkshɔn rikwaymɛnt dɛn.
| Fɔmula fɔ Kwɛmyuɛl | (C8H8)x · (C4H6)y · (C3H3N)z |
| Glas Transishɔn Tɛmpratura | 105°C / 221°F |
| Tipik Injɛkshɔn Molding Tɛmpratura | 204–238°C / 400–460°F |
| Tɛmpratura we de mek di ɔt deflekshɔn | 98°C / 208°F na 0.46 MPa / 66 PSI |
| UL RTI we dɛn kɔl RTI | 60°C / 140°F |
| Tensile Strɔng we pɔsin kin gɛt | 46 MPa / 6600 PSI, di wan dɛn we de wok |
| Flɛkshɔnal Strɔng | 74 MPa / 10800 PSI |
| Spɛsifi k Graviti | 1.08 |
| Shrink Rate we yu de du | 0,5–0,7% pan di . |
Teknik not: Di valyu dɛn we de ɔp na rɛfrɛns prɔpati dɛn we dɛn rayt fɔ di ABS prodak we de naw. ABS pefɔmans kin difrɛn akɔdin to rɛsin gred, aditiv, kɔlɔ, shit tik, ɛkstrushɔn kɔndishɔn ɛn tɛst we. Fɔ injinɛri projɛkt, aks ɛn apruv di aplikebul prodak TDS ɔ gri spesifikeshɔn pas fɔ yuz jenɛrik ABS valyu dɛn as fayn dizayn limit.
Smɔl ABS sheet de gi wan yunifom sabstret fɔ print grafik, tɛks, logo ɛn advatayzmɛnt imej dɛn. Wait ABS na yusful speshali usay nyutral opaque bakgrɔn nid fɔ ay-kɔntrast grafik riprodakshɔn.
Print ABS kin kam togɛda wit kɔt, CNC routin, drɔlin, bɛnd, bond ɛn thermoforming fɔ mek displei pat dɛn we dɔn dɔn ɛn industrial kɔmpɔnɛnt dɛn. Dis kin mek di wan dɛn we de print ɛn di wan dɛn we de mek tin dɛn ebul fɔ muf frɔm flat print sheet to wan kɔstɔm tri-dimɛnshɔnal prodak.
Yu kin pik difrɛn bays kɔlɔ dɛn dipen pan di dizayn we dɛn print ɛn di ɛnd-yuz aplikeshɔn. Wait ABS na tin we dɛn kin pik fɔ grafik printin, we blak ɛn kɔstɔm kɔlɔ kin yusful fɔ industrial panɛl, haus ɛn branded kɔmpɔnɛnt dɛn.
Nɔto ɔl ABS sɔfays de biev di sem we wit ɛvri dijital ink. UV-curable, screen-printing ɛn ɔda ink dɛn kin nid difrɛn surface ɛnaji, ink kemistri ɔ prɛtritmɛnt. Di kɔstɔma dɛn fɔ tɛst ripɔt ABS sɛmpul dɛn yuz dɛn aktual printa ɛn ink bifo dɛn gri fɔ mek dɛn prodyuz bɔku bɔku wan.
Dɛn kin evalyu di rayt smol ABS gred fɔ UV dijital printin we dɛn kin yuz na advatayzmɛnt bod, kɔstɔm panɛl, sayn, displei ɛn branded kɔmpɔnɛnt dɛn. Bifo bulk prodakshɔn, verify ink wet, adheshon, curing, kala riprodakshɔn ɛn skrach pefɔmɛns pan di say we yu dɔn pik.
Yu kin yuz skrin printin fɔ logo, tɛks, grafik ɛn industrial mak we di ink sistem kɔmpitabl wit di ABS sabstret. Dɛn fɔ aks di wan dɛn we de gi ink usay dɛn gɛt kemikal ɔ spɛshal adheshon rikwaymɛnt dɛn.
Projek dεm we de print di sheet bifo fכm nid כda validεshכn bikɔs di artwok εn ink layt kin strεch we dεn de tεmכfכm. Print pozishɔn, ink fleksibiliti, fɔm dip, drɔ rɛsɛshɔn ɛn ɔt kɔndishɔn fɔ evalyu pan di aktual pat dizayn.
Print afta thermoforming kin fayn fɔ pat dɛn we gɛt say dɛn we pɔsin kin ebul fɔ go. Kɔmpleks kɔv ɛn dip kaviti kin mek i nɔ izi fɔ print, so dɛn fɔ pik di sikyud fɔ print akɔdin to di pat jɔyometri ɛn di ikwipmɛnt fɔ mek di printin.
ABS na wan we dɛn kin pik bɔku bɔku wan fɔ aplikeshɔn usay di komponent dɛn we dɛn print ɔ we dɛn mek nid fɔ gɛt mɔ taf pas bɔku brital plastic matirial dɛn. Impekt pefɔmɛns dipen pan di ABS gred, tɛmpracha, di tik we di wɔl tik ɛn di pat jɔyometri.
ABS sheet kin ɔt ɛn thermoformed to shel, tre, haus, bin, ikwipmɛnt kɔva ɛn ɔda tri-dimɛnshɔnal pat dɛn. I fɔm kwaliti dɛn de mek i yusful fɔ ɔl tu di protɔtayp ɛn kɔmɛshɔnal-skel manufakchurin.
ABS de gi yusful kɔmbaynshɔn fɔ stiffnɛs ɛn taf we de ɛp di pat dɛn we dɛn mek fɔ kip dɛn shep. Dimɛnshɔnal stebiliti impɔtant fɔ print panɛl, mashin kɔva, haus ɛn prɛsishɔn fabricated kɔmpɔnɛnt dɛn.
Dɛn kin saw, rout, drɔl, day kɔt, mashin ɛn bon di ABS sheet dɛn we fit yuz di prɔses dɛn we dɛn pik fɔ di gred ɛn tik. Dis prɔsesin fleksibiliti de sɔpɔt kɔstɔm sayn, protɔtayp, haus ɛn industrial fabricated pat.
Smɔl sɔfays dɛn yusful fɔ print ɛn grafik aplikeshɔn, we tɛkstɔr, ɛmbos ɛn pɔtn sɔfays kin gi dɛkɔretiv apinɛns, ridyus visible skrach ɔ spɛshal taktil ifɛkt.
ABS na wan we pipul sabi fɔ mentɛn yusful tafnɛs akɔdin to wan brayt savis rɛnj. Bɔt di impak pefɔmɛns ɛn lɔng tɛm savis tɛmpracha na gred-spɛsifi k ɛn dɛn fɔ chɛk am we di pat we dɔn dɔn go wok insay dimand tɛmpracha kɔndishɔn.
ABS de yuz bɔku bɔku wan as thermoforming sheet bikɔs i de kɔba fɔmabiliti wit impak rɛsistɛns ɛn rigiditi. We dɛn de mek di sheet fɔm, dɛn kin ɔt di shit to wan fayn fɔm tɛmpracha, shep am oba ɔ insay mold, kol am ɛn trim am insay di pat we dɔn dɔn.
Vaykum fɔm de drɔ ɔt ABS sheet agens wan mold we de yuz vaykum prɛshɔn. Dɛn kin yuz am fɔ haus, tre, bag shel, mashin kɔva, bin, panɛl ɛn protɔtayp kɔmpɔnɛnt dɛn.
Di korekt gred en tiknes dipen pan di kaviti dip, dro rεshכ, mold jכmetri, rikwayd wכl tik, pat dimεnshכn εn fainal mεkanikal rikwaymεnt. Dip-dro projɛkt dɛn fɔ validet wit prodakshɔn trayal.
Fɔm kɔndishɔn fɔ fala di ABS gred ɛn ikwipmɛnt rɛkɛmɔndeshɔn dɛn we dɛn dɔn pik. Pri-drying kin nid fɔ de insay sɔm prodakshɔn kɔndishɔn fɔ ridyus di mɔstɔ-rilayt sɔfays dɛfɛkt dɛn we dɛn de ɔt ɛn fɔm.
Yu kin yuz ABS sheet we dɛn kin print fɔ displei kɔmpɔnɛnt dɛn, advatayzmɛnt panɛl dɛn, pɔynt-ɔf-pɔchɛshɔn strɔkchɔ dɛn, prodak ɔlda dɛn ɛn kɔstɔmayz prɔmoshɔnal displei dɛn usay grafik ɛn strɔkchɔral rigiditi ɔl tu nid.
Impact-resistant ABS kin thermoformed ɔ fabricated insay mashin haus, inschrumɛnt panɛl, protɛktiv kɔva ɛn gad. Fɔ difayn di wok we dɛn nid fɔ du akɔdin to di mɛkanikal lod, ɔt ɛksplɔshɔn ɛn di opareshɔn ɛnvayrɔmɛnt.
ABS sheet de yuz fɔ fɔm stɔkɛs shel, stɔrɔj kes ɛn protɛktiv kɔntena bikɔs ɔf in balans fɔ stiffness, tofness, surface appearance ɛn thermoformability.
Yu kin yuz di rayt ABS gred fɔ intɛriɔ panɛl, bɔs-bɔdi kɔmpɔnɛnt, kɔva ɛn ɔda transpɔt aplikeshɔn dɛn. Bɔku tɛm, ɔtomotiv prɔjek dɛn nid fɔ gɛt kɔntrol flaym, UV, impak, tɛmpracha ɔ rigyuletɔri prɔpati ɛn dɛn fɔ yuz aplikeshɔn-spɛsifi k gred dɛn.
ABS yusful fɔ akitekchral mɔdel, prodak protɔtayp, mɔk-ap ɛn kɔstɔmayz fabricated pat bikɔs dɛn kin kɔt, mashin, bon ɛn thermoformed sheet dɛn to kɔmpleks shep dɛn.
ABS sheet kin bi vaykum fɔm insay trey, bin, insɛt ɛn riyuzable kɔntena usay dimɛnshɔnal stebiliti ɛn impak rɛsistɛns impɔtant.
Thermoformable ABS Sheet fɔ Mɔdel Pat dɛn
ABS Plastik Boks we dɛn mek wit tɛmɔfɔm
ABS injin kes we dɛn mek wit tɛmɔfɔm
Tɛl di saplay if di matirial go bi dijital print, UV print, skrin print ɔ yuz wit ɔda ink sistem. Printa mɔdel ɛn ink kemistri na yusful infɔmeshɔn we print adheshon impɔtant.
Wan smol ABS sɔfays na jɔs di lɔjik statin pɔynt fɔ ay-rɛzolushɔn grafik, we tɛkstɔr ɔ ɛmbos matirial dɛn kin lɛk fɔ dɛkɔretiv ɔ industrial aplikeshɔn dɛn. Surface texture kin afɛkt di we aw dɛn print ɛn di ink kɔntakt.
Tina sheet kin fayn fɔ layt grafik ɔ fɔm kɔmpɔnɛnt, we tik sheet kin gi inkris stiffness fɔ panɛl, haus ɛn strɔkchɔral pat. Pik gej bay di aplikeshɔn we dɔn dɔn pas fɔ print nɔmɔ.
Wait, blak ɛn kɔstɔmayt kɔlɔ dɛn de. Fɔ prɔjek dɛn we gɛt brand-kɔlɔ rikwaymɛnt, difayn wan aprɔv kɔlɔ rɛfrɛns ɔ mɛzhɔbal kɔlɔ target bifo mas prodakshɔn.
Tɛl Wallis if leta dɛn go kɔt di ABS we dɛn print, rout am, drɔ am, bon am, bɛn am ɔ mek am thermoform. Daunstrim prɔsesin kin inflɔws di gred we dɛn lɛk, tik, sɔfa ɛn printin sikyud.
Test printin, adheshon, curing, scratching en eni subsequent fabrication pan representativ sampul bifo apruv bulk matirial. Fɔ grafik dɛn we dɛn mek wit tɛm, tɛst bak aw di pikchɔ we dɛn print de biev we dɛn de ɔt ɛn strɛch.
| Surface | Tipik Yuz | Baya Kɔnsidɛreshɔn |
|---|---|---|
| Fayn | Dijital printin, grafik, sayn ɛn panɛl | Kɔnfɔm glos, ink adheshon ɛn surface klin |
| Tekstur we dɛn mek | Indastrial panɛl, haus ɛn dɛkɔretiv pat dɛn | Tekstɔr kin afɛkt di we aw di grafik de luk ɛn di ink kɔntakt |
| Dɛn dɔn ɛmbos am | Dekorativ komponent ɛn spɛshal fabricated pat dɛn | Konfam embos dip ɛn fit fɔ fɔm |
| Na patna | Branded ɔ dɛkɔretiv fabricated prodakt dɛn | Apruv fizik sɔfayz sampul bifo bɔlk prodakshɔn |
| Faktor | ABS | PVC | HIPS | Akrilik |
|---|---|---|---|---|
| Impekt Resistans fɔ mek yu nɔ gɛt ɛnitin fɔ du wit am | Ay | Dipen pan gred | Gud fɔ bɔku jenɛral aplikeshɔn dɛn | Mɔ rigid bɔt we yu kɔmpia am wit brit |
| Tɛmofɔmin we dɛn de mek | Eksɛlɛnt aplikeshɔn eria | Gret dɛn we fit fɔ gɛt | Kɔmɔn fɔ mek dɛn mek am we dɛn kɔl thermoform | I nid fɔ gɛt di rayt fɔm gred ɛn kɔndishɔn dɛn |
| Dijital Printin we dɛn de print | Di kɔmpatibiliti fɔ print dipen pan di tritmɛnt we dɛn de yuz fɔ mek di say we dɛn de, di ink sistem, di tɛknɔlɔji we di printa gɛt ɛn di gred; sεmpl tεst na rεkomεnd fכ כl di sabstεrayt dεm | |||
| Best ABS Yuz Kes | ABS na patikyula yusful usay printin ɔ dɛkɔreshɔn fɔ kam togɛda wit tafnɛs, thermoforming ɛn sɛkɔndari fabrication | |||
Wallis de sɔpɔt B2B projɛkt dɛn we nid kɔstɔmayz ABS shit fɔ print, advatayz, tɛmfɔmin ɛn industrial fabrikeshɔn. Di wan dɛn we de bay kin sɛn di tɛknikal rikwaymɛnt dɛn so dat dɛn go ebul fɔ rivyu di matirial spɛsifikɛshɔn dɛn bifo dɛn tek sampul ɛn bɔku bɔku prodakshɔn.
Tiknes frɔm lɛk 0.5–13 mm
Wait, blak ɛn kɔstɔmayt kɔlɔ dɛn
Standart 1220 × 2440 mm ɛn dimɛnshɔn dɛn we dɛn kɔstɔmayz
Smɔl, tɛkstɔr, ɛmbos ɛn patɛn sɔfays
Dijital-printin aplikeshɔn dɛn
Tɛmofɔmin ɛn vaykum-fɔmin prɔjɛkt dɛn
CNC kot, routin ɛn sɛkɔndari fabrikeshɔn
Kastamayz pak ɛn ɛkspɔt rikwaymɛnt dɛn
Sampul evalueshɔn bifo bɔlk prodakshɔn
Kɔnsistɛns impɔtant mɔ fɔ print ɛn thermoforming opareshɔn. Dipen pan di prodak spesifikeshɔn we dɛn gri pan, ABS shit kwaliti inspekshɔn kin inklud:
Tik ɛn tik tolɛreshɔn
Shit wit, lɔng ɛn dimɛnshɔnal tolɛreshɔn
Di kɔnsistɛns we di kɔlɔ dɛn gɛt
Surface gloss ɔ tɛkstɔr
Flatness ɛn warpage
Inspekshɔn fɔ skrat, kɔntaminɛshɔn ɛn difrɛns dɛn we pɔsin kin si
Impekt ɔ mɛkanikal prɔpati dɛn we dɛn spɛsifa
Thermoforming evalueshɔn fɔ aplikebul prɔjek dɛn
Printabiliti ɔ ink adhesion tɛst usay dɛn gri
Packaging ɛn prodakt aydentifikeshɔn
If wan prɔjek nid spɛshal impak trɛnk, flaym retinj, UV rɛsistɛns, kɔlɔ valyu, glos, sɔfays tɛkstɔr ɔ printin adheshon, bayer dɛn fɔ difayn di aplikebul tɛst we ɛn akseptans krayteria insay di bay spesifikeshɔn.
Dabl-kɔlɔ ABS shit de jɔyn kɔntrast sɔfa ɛn kɔr kɔlɔ fɔ engrav grafik, sayn, lɛbl, aydentifikeshɔn panɛl ɛn dɛkɔretiv fabricated prodak.
ABS Dabl Kɔlɔ Shit
Sɔlid-kɔlɔ ABS shit kin kɔstɔmayz fɔ print displei, thermoformed kɔmpɔnɛnt, ikwipmɛnt kɔva, dɛkɔretiv panɛl ɛn ɔda aplikeshɔn dɛn we nid kɔnsistɛns bays kɔlɔ.
ABS Sɔlid Kɔlɔ Sheet
Wallis de saplae ABS sheet fɔ printa, thermoforming faktri, advatayzmɛnt manifakta, plastic fabricator, distribyushɔn ɛn industrial bayer dɛn we nid stebul spɛsifikɛshɔn ɛn kɔstɔmayz matirial opshɔn.
Di kɔrɛnt prodakt spɛsifikɛshɔn kɔba lɛk 0.5–13 mm, we de alaw di wan dɛn we de bay fɔ pik difrɛn gej fɔ print panɛl, displei, thermoformed shel ɛn hevi-duti fabricated kɔmpɔnɛnt dɛn.
Yu kin jɔyn wayt, blak ɛn kɔstɔm kɔlɔ dɛn wit smol, tɛkstɔr, ɛmbos ɔ patɛn sɔfays akɔdin to di prodakt dizayn we dɔn dɔn.
ABS valyu fɔ prɔjek dɛn we nid ɔl tu di sɔfayz grafik ɛn fɔ mek am afta dat, we de alaw di wan dɛn we de mek fɔ yuz di matirial fɔ print displei ɛn bak fɔ yuz thermoformed industrial components.
Sampul tɛst de alaw bayer fɔ kɔnfɔm printin, ink adheshon, thermoforming, mashining, kala ɛn finish-pat pefɔmɛns bifo dɛn kɔmit to bulk prodakshɔn.
ABS dijital printin shit na wan opaque acrylonitrile butadiene styrene plastic sheet we dɛn kin yuz as sabstret we dɛn kin print ɛn we dɛn kin mek fɔ advatayz displei, panɛl, haus, sayn, protɔtayp ɛn thermoformed kɔmpɔnɛnt dɛn.
Yɛs. Smol ABS sheet kin fayn fɔ dijital printin, bɔt dɛn fɔ tɛst di printa ɛn ink kɔmpitibliti bikɔs di adheshon kin difrɛn akɔdin to di ink kemistri ɛn di kɔndishɔn we di ink de.
Dɛn kin ebul fɔ evalyu fayn ABS sɔfays fɔ UV dijital printin. Test ink wetin, adheshon, curing ɛn abrasion resistance yuz di intended printa ɛn UV ink bifo mas prodakshɔn.
Yɛs, dɛn kin print di ABS gred dɛn we kɔmpitabl wit skrin we dɛn pik di rayt ink sistem. Di wan dɛn we de gi ink fɔ kɔnfɔm di kemikal kɔmpitibliti ɛn di tin dɛn we dɛn nid fɔ adheshon.
Yɛs. Tɛmofɔmin ɛn vaykum fɔm na men aplikeshɔn fɔ ABS shit. I kin fɔm to trey, shɔɛl, haus, kɔva, bag pat ɛn kɔstɔm industrial kɔmpɔnɛnt dɛn.
I kin pɔsibul wit di kɔrɛkt ink ɛn fɔm prɔses, bɔt di pikchɔ we dɛn print kin strɛch we dɛn de fɔm. Di wan dɛn we de bay fɔ du trial yuz di aktual artwok, fɔm dip, tɛmpracha ɛn ink sistem.
di kכrant prodakt spεsifikεshכn de list aprכksimatli 0.5–13 mm tiknes. Kɔnfɛm di avaylabl fɔ di kɔlɔ, wit, sɔfa ɛn ɔda kwantiti we yu nid.
Wan standad saiz we dɛn rayt fɔ dis prɔdak na 1220 × 2440 mm. Dimɛnshɔn dɛn we dɛn kɔstɔmayz de akɔdin to di prodakshɔn fisibiliti.
Di kɔrɛnt ditayl spɛsifikɛshɔn de list maksimal wit we na lɛk 2500 mm. If yu nid fɔ gɛt wan wayd sheet, gi di rayt tik, kɔlɔ ɛn sɔfa so dat dɛn go kɔnfɔm se i de.
Yɛs. Wallis de gi yu wayt, blak ɛn kɔstɔmayt kɔlɔ dɛn. Fɔ prɔjek dɛn we nid prɛsis brand kɔlɔ, gi wan apruv rɛfrɛns ɔ kɔlɔ standad.
Di opshɔn dɛn we de naw inklud smol, tɛkstɔr, ɛmbos ɛn patɛn sɔfays. Di bɛst say dipen pan di printin, apinans, thermoforming ɛn finish-product rikwaymɛnt.
ABS kin kɔt, rout, drɔ ɛn mashin yuz fayn ikwipmɛnt ɛn tul. Prɔsɛsin paramita dɛn fɔ ajɔst akɔdin to di tik we di shit tik ɛn di tin dɛn we dɛn nid fɔ du wit di ed we dɔn dɔn.
Standard ABS nɔ fɔ ɔtomɛtik asum se i fayn fɔ lɔng tɛm ɔdasay UV ɛksplɔshɔn. Di projɛkt dɛn we de na do fɔ sho di wɛda ɛn UV we dɛn nid ɛn yuz wan aprɔpriet stebul, kɔt ɔ protɛkt gred usay nid de.
ABS gɛt yusful resistans to bɔku tin dɛn bɔt i nɔ de universally chemical resistant. di pefɔmans dipen pan di kayn kemikal, kɔnsɛntreshɔn, tɛmpracha, strɛs ɛn ɛksplɔshɔn tɛm, so dɛn kin rɛkɛmand fɔ du aplikeshɔn-spɛsifi k tɛst.
Gi tik, waid, lɔng, kɔlɔ, sɔfayz finish, printin we, thermoforming ɔ fabrication prɔses, kwantiti, rikwayd funkshɔnal prɔpati ɛn delivri dɛstineshɔn.
Yɛs. Sampul tɛst na rikɔmɛnd fɔ printin, UV ink adheshon, thermoforming, mashin ɛn ɔda prɔses-sɛnsitiv aplikeshɔn dɛn bikɔs di aktual pefɔmɛns dipen pan di kɔmplit prodakshɔn sistɛm.
Yu de luk fɔ wan rilibul ABS dijital printin shit manifakta fɔ UV printin, advatayzmɛnt displei, thermoforming ɔ kɔstɔm plastic fabrication? Send Wallis yu rikwayd tiknes, dimɛnshɔn, kɔlɔ, sɔfayz finish, printin we, prɔsesin rikwaymɛnt ɛn ɔda kwantiti fɔ matirial rivyu ɛn faktri prayz.
