|
silikon pad we dɛn kin yuz
Wallis we nem Wallis
| Sayz: | |
|---|---|
| Material: | |
| advantej: | |
| Aplikeshɔn: | |
| Kwantiti: | |
Wallis wul silikon prɛs pad fɔ kad laminɛshɔn na wan ɔt-rɛsistɛns kusɛn matirial we dɛn mek fɔ industrial ɔt-prɛs prodakshɔn fɔ PVC , PETG ɛn polikabɔnɛt kad dɛn. Di kɔnstrɔkshɔn we de naw de kɔba silikon we nɔ de ɔt wit wan wul felt kusɛn layt fɔ sɔpɔt kɔntrol prɛshɔn distribyushɔn di tɛm we dɛn de ripit kad lamineshɔn saykl dɛn.
Available in 3mm, 5mm, 8mm and 10mm thicknesses , wit kɔstɔmayz dimɛnshɔn, density ɛn shep, di pad kin mach to difrɛn lamination plet, kad-shit fɔmat ɛn prɛs kɔnfigyushɔn. Di kɔrɛnt Wallis spɛsifikɛshɔn de diskrayb ɔt rɛsistɛns te to lɛk 180°C fɔ tipik PVC , PETG ɛn PC kad-laminɛshɔn kɔndishɔn dɛn.
Tipik aplikeshɔn dɛn na bank kad, ID kad, mɛmbaship kad, smart kad, kɔntaktlɛs kad, mɔlti-layer plastic kad ɛn Overlay film -film lamination. Di wul-felt kusɛn strɔkchɔ de difrɛns dis prodak frɔm Wallis silikon-onli ɛn silikon-fayba glas prɛs-pad prodakt dɛn.
Fɔ profeshɔnal B2B sɛlɛkshɔn, di wan dɛn we de bay fɔ gi di laminatɔ mɔdel, di hitin-plet dimɛnshɔn, di tik we di pad tik naw, di kad matirial, di hot-prɛs tɛmpracha, prɛshɔn, di tɛm we dɛn de de, di kɔndishɔn fɔ kol ɛn di prodakshɔn saykl dɛn we dɛn de ɛkspɛkt. Dɛn paramita ya fɔ evalyu togɛda pas fɔ pik wan pad jɔs bay tik.
| Spɛsifikeshɔn / Atribyut | Stɛndad / Kastɔm Opshɔn |
|---|---|
| Matirial fɔ Pad | Silikɔn + wul filt bays we nɔ de ɔt |
| Risistɛns fɔ Ɔt | I fayn fɔ di tipik PVC , PETG ɛn PC kad laminɛshɔn tɛmpracha — we dɛn dɔn tɔk naw te i rich lɛk 180°C |
| Tiknɛs Opshɔn dɛn | 3mm / 5mm / 8mm / 10 mm, di wan dɛn we de wok. kɔstɔm tiknɛs de fɔ ɛni ɔda |
| Pad Sayz / Dimɛnshɔn dɛn | Customized fɔ mach lamination plet dimɛnshɔn dɛn; OEM / ODM sɔpɔt |
| Prɛshɔn Distribushɔn | Disain fɔ sɔpɔt mɔ yunifom prɛshɔn distribyushɔn akɔs di yuzable pad sɔfays |
| Surface Kontakt | Smol silikon surface we dεn dεskrεb as nכn-abrasive to kad Overlay film s |
| Durability / Layfspan fɔ lɔng tɛm | Riyuzable fɔ ripit lamination saykl ɔnda fayn prɔses ɛn mentenɛns kɔndishɔn; di ekzak saykl layf dεn nכ de pכblish naw |
| Edj / Shep | Rɛktangul ɔ kɔstɔm-kɔt shep fɔ mach di lamineshɔn plet |
| Ɔda Kwantiti / MOQ | Di pej we de naw de tɔk bɔt fleksibul smɔl-batch ɛn bɔlk ɔda; kɔnfɔm ɛksaktɔ MOQ fɔ di spɛsifikɛshɔn we yu dɔn pik |
| Kastamayzeshɔn & OEM / ODM | Kastom saiz, tiknes, density ɛn shep akɔdin to di laminator rikwaymɛnt dɛn |
Teknik klarifyeshɔn: di kɔrɛnt Wallis prodak spɛsifikɛshɔn de diskrayb dis pad as ɔt-rɛsistant silikon we dɛn kɔba wit wan wul filt bays, bɔt i nɔ de pablish di ɛksaktɔ wul kɔntinyu, fil densiti, silikon hadnɛs, ditayl layt ɔriɛnteshɔn, tiknɛs tolɛreshɔn, kɔmpreshɔn rikavari ɔ pɔrmanent kɔmpreshɔn-sɛt valyu. Baya dɛn we nid dɛn paramita ya fɔ aks fɔ mɔdel-spɛsifi k tɛknikal data.
Tɛmpratura klarifyeshɔn: lɛk 180°C na di valyu we dɛn dɔn pablish naw fɔ dis Wallis prodak. Nɔ riples am wit kɔmpitishɔn in 200°C ɔ 250°C spɛsifikɛshɔn pas Wallis gɛt tɛst data we kɔnfɔm di ay raytin fɔ dis ɛksaktɔ kɔnstrɔkshɔn.
Wan wul silikon kad lamineshɔn pad na wan kɔmpliant hot-prɛs kusɛn we dɛn kin yuz insay di lamineshɔn stak fɔ wan plastic-kad prɛs. I de kɔba di ɔt-rɛsistant bihayvya fɔ silikon wit di kusɛns kwaliti dɛn fɔ wul fel fɔ ɛp fɔ akɔmod smɔl difrɛns dɛn pan kad-stak tik ɛn prɛs kɔndishɔn.
Silikɔn de gi di ɔt-rɛsistant ɛlastomɛrik kɔmpɔnɛnt na di pad. I hadnɛs, tik ɛn kɔmpreshɔn kwaliti dɛn de inflɔws aw di pad de ansa ɔnda lamination prɛshɔn.
Wool felt ad wan tekstail-based cushioning layer we kin gi wan soft mechanical response pas sɔm reinforced silicon constructions. So dɛn fɔ tink bɔt di felt density, mɔstɔ kɔndishɔn ɛn lɔng tɛm kɔmpreshɔn we dɛn de prodyuz.
Di kɔmbaynshɔn na fɔ ɛp fɔ sheb prɛs lod akɔdin to di kad stak we i de akɔmod smɔl lokal tiknɛs difrɛns. I fɔ tek am as wan kɔmpɔnɛnt fɔ di kɔmplit lamination rɛsipɛkt pas fɔ bi wan standalɔn sɔlvishɔn fɔ ɛvri kad dɛfɛkt.
Wan kusɛn we gɛt filt kin gi wan mɛkanikal rispɔns we soft pas wan silikon pad we at ɔ we gɛt mɔ rɛinfɔs. Dis kin bi yusful we di lamination stak nid adishɔnal kɔmpɛnshɔn fɔ smɔl lokal vɛryushɔn.
Filt tik ɛn density kin inflɔws aw kwik ɔt de travul tru di kɔmplit lamination stak. We yu de chenj frɔm ɔda pad kɔnstrɔkshɔn to wul-silikon pad, so dɛn fɔ rivalidet di ɔt ɛn kol risɛp we de naw.
Tekstail-based matirial kin ansa difrɛn we to stɔrɔj humidity pas sɔlid silikon. Kip di pad dray ɛn klin, mɔ usay dɛn de yuz kad matirial, ink ɔ Overlay film s we nɔ de mek wata.
Ɛni fayv we lɔs, dɔst ɔ kɔntaminɛshɔn na di lamineshɔn stak kin mek mak dɛn we pɔsin kin si. Inspek di fil ed ɛn di say dɛn we de na do ɔltɛm ɛn pul di pad dɛn we gɛt dɔti frɔm di prodakshɔn we nid de.
Hot-pres kad lamination de kam togɛda tempɔret, mɛkanikal prɛshɔn ɛn kɔntrol kol. di kushכn pad de sidon insay dis sistεm εn i de εp di stak fכ rεspכnd to sכm dimεnshכnal difrεns bitwin layεr dεm.
Print layers, RFID inlays, embedded electronic components ɛn ɔda kad strɔkchɔ dɛn kin introduks smɔl tiknes vɛryushɔn. wan kompliant kushכn kin εp fכ ridyus di hεli lokalizεd prεshכn kכnsantreshכn.
Di pad dimɛnshɔn ɛn tik we dɛn pik kɔrɛkt wan de ɛp fɔ mek dɛn kɔntinyu fɔ kɔntakt mɔ kɔnsistɛns akɔdin to di prɛs eria we yu kin yuz. Ovasayz, fold, kɔntamin ɔ kɔmprɛs pad kin afɛkt dis wok bad bad wan.
Laminεshכn dεfεkt kin kכmכt bak frכm trap εya, mכsichכ, sכlvεnt rεtεnshכn, כnεvεn pletεn tεmprachכ, inkכrεkt prεshכn, ink-film tik, Overlay film kεmεstri, kol rεt כ pwεl plet paralelizm. So dɛn fɔ pik wan kusɛn pad as pat pan di kɔmplit prɔses.
Wallis naw de list 3mm, 5mm, 8mm ɛn 10mm tiknes opshɔn dɛn. Tiknes de afɛkt di kɔmprɛs stak ayt, prɛshɔn kɔmpɛnshɔn ɛn pɔtɛnɛshɛl di tɛmal rispɔns fɔ di prɛs asɛmbli.
Dɛn kin ebul fɔ evaluate 3mm kɔnstrɔkshɔn usay di prɛs nid fɔ gɛt rili tin wul-silikon kusɛn ɔ usay di pad we dɛn dɔn gri fɔ yuz de yuz di sem tik.
Wan 5mm pad de gi adishɔnal kusɛn tiknɛs ɛn i fɔ validet am agens di laminator kliarens, prɛshɔn sɛtin ɛn ɔt-transfa profayl.
Wan 8mm pad kin gi wan dip kɔmpliant layt, bɔt i kin chenj di tɔtal lamination-stack ayt bak. Kɔnfɛm di mashin kliarens ɛn di ɔt kɔndishɔn bifo yu riples wan tina pad wit wan 8mm vɛshɔn.
Wan 10mm kɔnstrɔkshɔn fɔ pik ɔl afta dɛn dɔn kɔnfyus se di laminatɔ kin akɔmod di tik we dɔn go ɔp ɛn di tɛmpracha ɛn prɛshɔn profayl we dɛn nid de kɔntinyu fɔ ajɔst.
Dɛn kin rivyu di kɔstɔm tik fɔ sɔm patikyula kad prɛs dɛn. Fɔ gi wan aprɔv kusɛn sampul we dɔn de ɔ ditayla drɔin de ɛp fɔ ridyus di riplesmɛnt-pad sɛlɛkshɔn mistek dɛn.
Di kɔrɛnt Wallis spɛsifikɛshɔn se di wul silikon pad fit fɔ tipik PVC , PETG ɛn PC kad laminɛshɔn tɛmpracha te to lɛk 180°C.
Di wan dɛn we de bay fɔ difrɛns bitwin wan kɔntinyu ɔpreshɔn tɛmpracha ɛn wan shɔt tɛm pik tɛmpracha. Di pej we de naw nɔ de pablish difrɛn raytin fɔ dɛn tu kɔndishɔn ya.
If yu put am na wan tɛmpracha fɔ sɔm minit, i kin afɛkt wan pad difrɛn we frɔm we yu kɔntakt am fɔ shɔt tɛm. Inklud hot-pres dwell time ɛn saykl frɛkuɛns we yu de aks fɔ tɛknikal kɔnfɔmeshɔn.
Polycarbonate kad lamination kin yuz dimand thermal saykl. If yu aktual prɔses de nia ɔ pas di tɛmpracha limit we dɛn dɔn pablish naw, kɔnfɔm kɔmpitibliti bifo yu ɔda pas fɔ abop pan di jenɛrik PC aplikeshɔn stetmɛnt nɔmɔ.
Silikɔn hadnɛs de afɛkt difɔmeshɔn ɔnda prɛs lod. Di Wallis pej we de naw se dɛn kin kɔstɔmayz di density bɔt i nɔ de pablish wan patikyula Shore A hadnɛs valyu fɔ dis wul-silikon mɔdel.
di fil dεnsiti de afekt di kushכn, kכmpreshכn εn tεmral bihayvya. If pɔsin we de bay de riples wan felt-silikon pad we dɔn de, dɛn fɔ kɔmpia di density togɛda wit di tik ɛn di hadnɛs.
Afta ripit hot-pres saykl, permanent tiknes loss kin ridyus kushioning pefomans. Wallis fɔ ad wan mɛzhɔd kɔmpreshɔn-sɛt ɔ tiknɛs-lɔs spɛsifikɛshɔn if i de.
Rikavεri afta εvri prεs saykl de infכlכw lכng tεm rεpεtabiliti. Di wan dɛn we de mek kad we gɛt bɔku bɔku kad fɔ aks fɔ di rikavari data we dɛn kin yuz ɔ fɔ du rial prodakshɔn trayal.
Yu kin yuz wul silikon pad fɔ hot-pres lamination fɔ print PVC kɔr ɛn PVC Overlay film s fɔ ID kad, mɛmbaship kad, bank kad ɛn ɔda plastic-kad prodak.
PETG kad strכkchכ dεm kin yuz wan kompitibl wul-silikon kushכn bak. Tempracha, prɛshɔn ɛn kol sɛtin fɔ validet wit di aktual PETG fɔmyulashɔn ɛn kad stak.
PC kad prodakshɔn nid fɔ kɔntrol tɛmal prɔsesin. Kɔnfɛm di aktual prɛs tɛmpracha agens di kɔrɛnt aprɔksimatli 180°C Wallis rɛytin bifo prodakshɔn yuz.
Kontaktlɛs-kad ɛn RFID shit kin gɛt ɛntena, inlay ɛn lokal strɔkchɔral vɛryushɔn. wan kompliant kushכn kin εp fכ akomoda sכm sכm tik difrεns dεm di tεm we di laminεshכn saykl de.
Di Wallis pej we de naw de list bak Overlay film -film lamination as aplikeshɔn. Kɔnfɛm di ɛksaktɔ stak sikyud ɛn us sɔfays pan di pad kɔntakt di plet ɔ rilis layt.
Multi-layer kad strɔkchɔ kin bɛnifit frɔm kɔntrol kusɛn usay ripit lamination saykl dɛn nid kɔnsistɛns prɛshɔn distribyushɔn.
| Pad Tayp | Jɛnɛral Kɔnstrɔkshɔn | Ki Sɛlɛkshɔn Point dɛn |
|---|---|---|
| Wool silikon pres pad | Silikɔn we dɛn jɔyn wit wul bin fil fɔ kusɛn | Felt density, moisture, lint, kompreshɔn rikavari, tik ɛn tɛmpracha |
| Silikɔn Prɛs Pad | Silikɔn-based pad we nɔ gɛt di wul-felt kɔnstrɔkshɔn we dɛn tɔk bɔt na dis pej | Hadnɛs, tik, tɛmpracha, kɔmpreshɔn bihayvya ɛn sɔfayz kɔndishɔn |
| Silikɔn-Fayba Glas Kusɛn | Silikɔn wit fayv glas riinfɔsmɛnt | Riinfɔsmɛnt intɛgriti, tiknɛs, hadnɛs, sɔfayz kɔndishɔn ɛn tɛmal rispɔns |
No universally best pres-pad konstrakshɔn nɔ de fɔ ɛvri laminator. Kɔmpia kandidet pad dɛn we yu de yuz di sem stɛl plet dɛn, kad stak, tɛmpracha, prɛshɔn, ɔt tɛm ɛn kol program we yu yuz na yu prodakshɔn layn.
Gi di laminator manifakta, mɔdel ɛn kɔnfigyushɔn if i de. Di pad spɛsifikɛshɔn ɔ foto dɛn we dɔn de kin ɛp bak fɔ no di kɔnstrɔkshɔn we dɛn nid.
Saplae di hitin-plet ɔ kasɛt lɔng ɛn waid, inklud ɛni posishun ol, kɔna rayus, kɔt-ɔut ɔ kliarens rikwaymɛnt.
If yu de riples wan pad we dɔn de, mɛzhɔ in ɔrijinal spɛsifikɛshɔn if yu no pas fɔ mɛzhɔ wan pad we dɛn dɔn yuz we dɛn dɔn kɔmprɛs bad bad wan nɔmɔ.
Spɛsifik PVC , PETG , PC ɔ ɔda matirial ɛn aydentify Overlay film , inlay ɔ spɛshal layt dɛn na di lamineshɔn stak.
Stet nɔmal ɔpreshɔn tɛmpracha, maksimal tɛmpracha, prɛs prɛshɔn ɛn ɔt dwɛl tɛm.
If yu de riples pad bikɔs ɔf difrɛns, diskrayb di rial prɔblɛm lɛk prɛshɔn mak, nɔ ivin lamineshɔn, pad kɔmpreshɔn, kɔntaminɛshɔn ɔ riplesmɛnt frɛkuɛns pasmak.
Test di kandidet pad wit di rial prodakshɔn stak bifo yu chenj di spesifikeshɔn akɔdin to wan ful prodakshɔn layn.
Dɔst, ink rɛsɛdyu, adeziv ɔ kad fragmɛnt kin bi prɛshɔn pɔynt dɛn we dɛn de lamin. Inspek ɛn klin di pad akɔdin to di mentenɛns prosidur we dɛn dɔn gri fɔ.
Stɔr di pad na say we dray ɛn avɔyd fɔ mek yu nɔ kɔntrol di mɔs, mɔ bifo yu prɛs saykl dɛn we gɛt ay tɛmpracha.
Stɔr big sheet dɛn flat usay i pɔsibul fɔ ridyus di bɛnd, fold ɔ lokal difɔmeshɔn we yu nɔ want.
Riples ɔ ri-evalyu pad dɛn we de sho pasmak pɔrmanent kɔmpreshɔn, filt we dɔn pwɛl, sɔfayz kɔntaminɛshɔn, silikon we dɔn at, edj damej ɔ we nɔ kɔnsistɛns lamineshɔn pefɔmɛns.
Di Wallis pej we de naw nɔ de pablish wan garanti nɔmba fɔ di lamination saykl dɛn. Savis layf dipen pan tɛmpracha, prɛshɔn, tɛm fɔ de, stɔrɔj, klin ɛn di pad spɛsifikɛshɔn.
Finished lɔng ɛn waid
Tik we pad tik
Tiknes kɔnsistɛns akɔdin to di sheet
Flat we pɔsin kin gɛt
Kɔt-ɛj kwaliti
Silikɔn sɔfays kɔndishɔn
Wool bin fil kondishɔn
Layer bonding usay i apɔynt
Kɔntaminɛshɔn we pɔsin kin si
Fayba dɛn we lɔs ɔ filt we dɔn pwɛl
Hadnɛs ɔ density usay dɛn spɛsifa
Di tin we dɛn nid fɔ mek i nɔ gɛt wam
Kɔmpreshɔn bihayvya usay dɛn spɛsifa am
Kastom ol ɔ kɔt-ɔut
Kwantiti ɛn di we aw dɛn pak am
Tiknes fɔ chɛk na bɔku pozishɔn dɛn akɔdin to big pad dɛn we dimɛnshɔnal kɔnsistɛns impɔtant to di aplikeshɔn.
Dɛn fɔ chɛk di say dɛn we dɛn kin fil ɛn di ed dɛn fɔ si if dɛn gɛt dɔti, fɔ mek dɛn nɔ gɛt ɛnitin fɔ du wit dɛn ɔ fɔ si if dɛn gɛt damej we kin go insay di lamineshɔn stak.
Dimenshɔnal inspekshɔn nɔmɔ nɔ go ebul fɔ sho kɔmplit prɔses kɔmpatibiliti. Prodakshɔn-kad tɛst stil bi di mɔs yusful fainal validɛshɔn.
Yu kin kɔt pad dɛn akɔdin to di lamineshɔn plet ɔ kasɛt dimɛnshɔn we di pɔsin we bay am gi.
Standard 3mm, 5mm, 8mm ɛn 10mm opshɔn dɛn de na di list naw, we dɛn kin rivyu ɔda tiknes dɛn akɔdin to wetin di prɔjek nid.
Di Wallis pej we de naw se dɛn kin kɔstɔmayz di density. If density ɔ hadness na prɔses-kritikal, difayn di rikwayd mɛzhɔbal paramita insay di bay spɛsifikɛshɔn.
Dɛn kin rivyu rɛktangul pad ɛn kɔstɔm-kat shep fɔ mashin dɛn we nid spɛshal kɔna, ol ɔ kliarens eria.
Wallis de saplae kad-matirial prodak ɛn kad-prɔdakshɔn kɔnsumabl to intanashɔnal kad manifakta dɛn. Di wan dɛn we de bay kin jɔyn di tɛknikal drɔin dɛn, di pad sɛmpul dɛn we dɔn de ɛn di prodakshɔn paramita dɛn we dɛn de aks fɔ riplesmɛnt ɔ kɔstɔmayz wul-silikon prɛs pad dɛn.
Fɔ B2B ɔda, pefɔmɛns fidbak kin yus mɔ we i inklud di kad matirial, laminatɔ mɔdel, pad tiknɛs, prɛs tɛmpracha, prɛshɔn ɛn nɔmba fɔ di saykl dɛn we dɛn dɔn dɔn. Dɛn ditil ya de ɛp fɔ separet di prodakt pefɔmɛns frɔm difrɛns dɛn na di prɔsesin kɔndishɔn dɛn.
Dɛn fɔ protɛkt di wul silikon pad dɛn frɔm mɔstɔ, kɔntaminɛshɔn, fold, ed damej ɛn kɔmpreshɔn pasmak we dɛn de kip ɛn intanashɔnal transpɔt.
Big pad dɛn fɔ pak flat usay i pɔsibul fɔ ridyus difɔmeshɔn bifo dɛn instɔl dɛn.
If yu rap am fayn fayn wan, dat kin ɛp fɔ mek di kɔmpɔnɛnt we dɛn mek wit wul dɔn dray we dɛn de kip am ɛn transpɔt am na ɔda kɔntri dɛn.
Kip dɔst, shap tin ɛn abrasive matirial fa frɔm di silikon sɔfa fɔ ridyus di risk fɔ difrɛns we yu de yuz lamination leta.
Na kusɛn we nɔ de wam we dɛn kin yuz fɔ mek plastic-kad lamination we dɛn kin yuz ɔt. Di Wallis prodak we de naw de kam togɛda silikon wit wan wul felt bays fɔ gi tɛmal rɛsistɛns ɛn mɛkanikal kusɛn.
Di Wallis spɛsifikɛshɔn we de naw de diskrayb silikon we nɔ de ɔt we dɛn jɔyn wit wan wul filt bays. Eksakt layt oriɛnteshɔn ɛn matirial kɔmpɔzishɔn nɔ de pablish na di pej we de naw.
Di prodak tebul we de naw de tɔk se i fit fɔ di tipik PVC , PETG ɛn PC kad laminɛshɔn tɛmpracha dɛn we go rich lɛk 180°C. Kɔnfɛm aktual kɔntinyu ɛn pik ɔpreshɔn kɔndishɔn bifo yu ɔda.
Yɛs. Dɛn 4 tik ya de na di list naw, ɛn wi kin tɔk bak bɔt kɔstɔm tik.
Selekshɔn dipen pan di laminator, plet kliarens, di apruv pad we de naw, kad stak, hadnɛs, tɛmpracha ɛn prɛshɔn. Pad we tik pasmak nɔ kin bɛtɛ ɔtomɛtik wan.
Yɛs. Wallis de sɔpɔt kɔstɔmayt lɔng, wit ɛn shep dɛn akɔdin to lamination-plet rikwaymɛnt dɛn.
Di pej we de naw se dɛn kin kɔstɔmayt di density. Baya dɛn fɔ spɛsifa wan mɛzhɔbal target we density ɔ hadnɛs na prɔses-kritikal.
Wan patikyula Shore A hadness nɔ de pablish fɔ di kɔrɛnt Wallis wul-silikon pad. Rikwest di aprɔpriet valyu fɔ di kɔnstrɔkshɔn we yu dɔn pik if dɛn nid fɔ mek i at na yu tɛknikal spɛsifikɛshɔn.
Yɛs. PVC kad lamination na wan pan di praymar aplikeshɔn dɛn we Wallis dɔn list.
Yɛs. PETG de inklud bak insay di aplikeshɔn rɛnj we de naw. Validate di pad wit di aktual PETG lamination resipi.
PC kad lamination de list as aplikeshɔn, bɔt di aktual prɔses tɛmpracha fɔ stil kɔmpitabl wit di pad in tɛknikal limit.
I kin evaluet fɔ RFID ɛn smat-kad lamination usay kusɛnin nid fɔ akɔmod smɔl lokal tiknes vɛryushɔn dɛn na di kad strɔkchɔ.
Yɛs. Overlay film -film lamination de klia wan insay di Wallis aplikeshɔn infɔmeshɔn we de naw.
Wool-silicone pads inklud wan felt cushioning component, we silicon-only pads nɔ de yuz di wul-felt strɔkchɔ we dɛn tɔk bɔt na dis pej. Dɛn prɛshɔn kɔmpɛnshɔn, ɔt-transfa bihayvya ɛn mentenɛns rikwaymɛnt dɛn kin difrɛn so.
Silikɔn-fayba glas pad dɛn de yuz fayv glas riinfɔsmɛnt, we dis prɔdak de yuz wul fil as in kusɛn komponent. Di tu kɔnstrɔkshɔn dɛn fɔ evalyu sɛpret fɔ tik, hadnɛs, tɛmal rispɔns ɛn kɔmpreshɔn.
Di Wallis pej we de naw nɔ de pablish wan garanti fɔ saykl kɔnt. Savis layf dipen pan tɛmpracha, prɛshɔn, saykl tɛm, pad tik, mentenɛns ɛn stɔrɔj.
Riples ɔ evalyu di pad we i sho se i gɛt bɔku bɔku pɔrmanent kɔmpreshɔn, silikon we dɔn at ɔ we dɔn pwɛl, filt we dɔn dɔti, fayv we dɔn lɔs, di edj we dɔn pwɛl ɔ we di lamineshɔn kɔnsistɛns de go dɔŋ.
Kip am klin, dray ɛn flat, fa frɔm tin dɛn we shap, dɔti, humidity we yu nɔ kɔntrol ɛn ɔt pasmak we yu nɔ de yuz am.
Di pej we de naw de tɔk bɔt fleksibul ɔda fɔ smɔl ɛn bɔlk kwantiti bɔt i nɔ de pablish wan fiks MOQ. Kɔnfɛm di MOQ we de naw akɔdin to di saiz, tik ɛn di tin dɛn we dɛn dɔn kɔstɔmayz.
Gi laminator model, plet dimɛnshɔn, pad tiknes, kwantiti we dɛn nid, kad matirial, hot-prɛs tɛmpracha, prɛshɔn, tɛm fɔ de, pad spɛsifikɛshɔn we de naw, kɔstɔm ol ɔ shep dɛn ɛn di delivri dɛstineshɔn.
We i pɔsibul, wan pad sampul we dɛn dɔn gri fɔ ɔ ditayla drɔin we dɔn de kin ɛp Wallis fɔ ebul fɔ no di dimɛnshɔn, tik ɛn kɔnstrɔkshɔn fɔ wan riplesmɛnt prodak.
Yu de luk fɔ wan rilibul wul silikon prɛs pad manifakta fɔ kad lamination ? Send Wallis yu laminator model, pad dimɛnshɔn, tiknes, opareshɔn tɛmpracha, kad matirial ɛn kwantiti fɔ tɛknikal rivyu, sampul tɛst ɛn B2B faktri prayz.
