|
Wallis - PVC krataa
Wallis na ɔkyerɛwee
Popa PVC krataa
| Dodow: | |
|---|---|
Popa PVC Thermoforming Krataa a wɔde yɛ Blister Packaging
Wallis clear rigid PVC thermoforming krataa no yɛ nea wɔayɛ ama blister packs, clamshell packaging, trays, display covers ne amanne kwan so vacuum-formed afã horow. Ɛde nneɛma a wɔde kyerɛ a ɛda adi pefee, ne kɛse a wɔahyɛ so ne nea wɔde hyehyɛ nneɛma a wotumi de ho to so ma packaging converters, thermoforming factories, brand wuranom, distributors ne OEM manufacturers.
Mprempren nneɛma ahorow no betumi de ama wɔ nkratafa anaa nhoma mmobɔwee mu, a ne kɛse fi bɛyɛ 0.20mm kosi 3.00mm na ne tɛtrɛtɛ kodu 2050mm , a egyina grade, production feasibility ne order dodow so. Wobetumi aka nkyerɛkyerɛmu a emu da hɔ, tinted na wɔayɛ no sɛnea wɔpɛ ho asɛm ama mfiri ahorow a wɔde yɛ, cavity bun ne ahwehwɛde ahorow a wɔde di dwuma awiei.
Grade-selection note: Ɛnsɛ sɛ wɔde standard clear PVC ma retail ne industrial packaging kyerɛ sɛ ɛne aduan a wɔde di nkitaho, nnuru anaa aduruyɛ-mfiri hyia ara kwa. Si nhyehyeɛ a ɛfata, dwumadie a wɔde di dwuma awieeɛ, baabi a wɔrekɔ ne mprempren nkrataa a ɛfoa so no so dua ansa na wɔadi dwuma biara a wɔahyɛ ho mmara.
| Atadeɛ | Clear rigid PVC / unplasticized PVC formulation a wɔapaw ama thermoforming |
| Thickness Range a Ɛyɛ Fɛ | Bɛyɛ 0.20–3.00mm; sɛnea wobetumi anya no gyina abasobɔde ne ɔkwan a wɔfa so yɛ no so |
| Ntrɛwmu a Ɛsen Biara | Ɛkɔ 2050mm, ɛgyina ne kɛseɛ ne ne yɛ a wɔasi so dua |
| Nneɛma a Wɔde Ma no Format | Rolls, nkratafa a wɔatwa ne akɛse a wɔadan no sɛnea wɔpɛ |
| Nneɛma Titiriw a Wɔyɛ | Vacuum a wɔde yɛ, nhyɛso a wɔde yɛ, blister a wɔde yɛ, die-cutting, tintim ne nneɛma a wɔde kyekyere nneɛma mu nsakrae |
| B2B Nnwuma a Wɔyɛ | Nhwɛsode sɔhwɛ, amanne gauge ne trɛw, grade matching, export packaging ne bulk supply |
Bisa Thermoforming Nhwɛsode ne Quote
Popa PVC krataa na Roll Supply
Nneɛma a Wɔde Yɛ Thermoforming a Ɛda Hɔ
Thermoforming clear PVC krataa yɛ thermoplastic ade a ɛyɛ den a ɛyɛ mmerɛw bere a ɛyɛ hyew no, wɔde vacuum, nhyɛso anaa mfiri mmoa na ɛyɛ no sɛnea ɛbɛyɛ a ɛbɛbɔ nkuku, na ɛkora geometry a wɔayɛ no so bere a wɔahyɛ onwini akyi. Wɔtaa de nneɛma a ɛyɛ teateaa di dwuma de kyekyere nneɛma, bere a wobetumi de krataa a ɛyɛ den adi dwuma ama nkataso a wɔayɛ, tray ne mfiridwuma mu nneɛma.
Sɛnea wɔyɛ no yiye no gyina nea ɛboro krataa a wɔfrɛ no krataa no mu duru so. Nnuru a wɔde yɛ, molecule orientation, gauge tolerance, ɔhyew uniformity, mold temperature, draw ratio, plug-assist design, cooling ne trimming nyinaa nya ɔfasu kyekyɛ ne finished-part quality so nkɛntɛnso.
Clear PVC ma nkyerɛkyerɛmu a ɛda adi pefee ma nneɛma a wɔakyekyere. Ɛsɛ sɛ wɔpene haze, tint, surface gloss, flow lines ne efĩ so tia honam fam nhwɛsode efisɛ 'clear' betumi agyina hɔ ama optical gyinapɛn ahorow wɔ retail, industrial ne pharmaceutical dwumadie nyinaa mu.
Controlled gauge boa ma ɔhyew ne nneɛma a wɔtwetwe daa kɔ so. Deep cavities, sharp corners ne high draw ratios betumi ama local thinning aba, enti ɛsɛ sɛ wɔde starting thickness no de finished part geometry ne minimum-wall requirement di dwuma.
Stable sheet orientation ne ɔhyew brɛ shrinkage a wontumi nni so, wɛb distortion ne registration haw ahorow ase. Roll-fed packaging lines nso betumi ahwehwɛ sɛ ne tɛtrɛtɛ, anoano su ne winding tension a ɛkɔ so daa.
Nsunsuansoɔ adwumayɛ gyina PVC nhyehyɛɛ, ɔhyeɛ, ne kɛseɛ ne geometry a wɔayɛ so. Baabi a ɛho hia sɛ wɔde awɔw mu hyew di dwuma, ɛko tia nsu a ɛtɔ anaasɛ ahobammɔ a ɛbɔ kɛse no, ɛsɛ sɛ wɔsɔ grade ne ɔfã a wɔawie no hwɛ wɔ tebea horow a wɔde di dwuma ankasa no mu.
Packaging betumi ahwehwɛ UV tintim, screen tintim, folding, die-cutting, ɔhyew sealing, RF nsɔano, adhesive bonding anaa lidding compatibility. Ɛsɛ sɛ wosi adeyɛ biara so dua ma ɔfasu a wɔapaw ne nea wɔayɛ no sen sɛ wobesusuw sɛ efi base polymer no nkutoo mu.
Controlled Surface ne Optical Quality
Nneɛma a Wɔde Yɛ Volume Thermoforming
Nsɛm a edidi so yi bɔ mprempren nneɛma-kratafa ahorow no mua. Ɛsɛ sɛ wɔsi abodwokyɛre pɔtee, aniwa botaeɛ, mfiridwuma mu nneɛma, mmara a wɔdi so tebea ne sɔhwɛ akwan so dua ma grade ne adetɔ ahyɛdeɛ biara.
| Nneɛma a Wɔakyerɛkyerɛ | Mu |
|---|---|
| Aguade no Edin | Clear rigid PVC krataa / film ma thermoforming |
| Atadeɛ | Rigid PVC formulation a wɔpaw maa forming ne end-use grade a wɔhwehwɛ |
| Nneɛma a ɛyɛ den | Bɛyɛ 0.20–3.00mm; customized thickness a egyina si so dua |
| Ntrɛwmu a Ɛsen Biara | Ɛkɔ 2050mm, egyina gauge ne production ahwehwɛde so |
| Ahosuo | Ɛda adi pefee / ɛda adi pefee; tinted ne customized kɔla ahorow a ɛwɔ hɔ a ɛhyɛ MOQ ase |
| Ɔkwan a wɔfa so yɛ no | Krataa, nhoma mmobɔwee anaa nea wɔasakra no kɛse |
| Ani | Faako a ɛyɛ hyew a ɛyɛ torotoro; afoforo wie a egyina abasobɔde so |
| Nneɛma a wɔyɛ | Vacuum forming, pressure forming, die-cutting, printing, folding, sealing ne packaging nsakraeɛ wɔ sɔhwɛ akyi |
| Nnwuma a Wɔde Di Dwuma | Blister packs, clamshells, trays, retail packaging, aduruyɛ-mfiri a wɔde kyekyere nneɛma, nnuan a wɔapaw a wɔde kyekyere nneɛma ne mfiridwuma afã horow a wɔayɛ |
Wɔ nnwuma a wɔresusuw ɔkwan foforo a wɔbɛfa so asi PVC ananmu no, Wallis nso bobɔ din Popa PET Ɔhyew a Wɔde Yɛ Ɔhyew Krataa . Pene nneɛma biara a wɔde besi ananmu denam forming ne packaging-line sɔhwɛ ahorow so, ɛnyɛ denam krataa a wɔde fi ase no mu duru a ɛne ne ho hyia nkutoo so.
| Selection factor | Rigid PVC thermoforming krataa | PET thermoforming krataa | PETG thermoforming krataa |
|---|---|---|---|
| Nneɛma a wɔde yɛ adwuma ho nsɛm | Wɔde sini a ɛyɛ den a wɔde kyekyere nneɛma sini asi hɔ; formulation a wɔpaw ma stiffness ne draw suban | Polyester krataa a wɔde di dwuma wɔ nneɛma a wɔde kyekyere nneɛma a wɔde thermoformed a emu da hɔ mu; adwumayɛ gu ahorow wɔ abasobɔde ahorow mu | Copolyester taa paw baabi a forming ne toughness ahwehwɛde ahorow fa ne grade su ahorow ho |
| Nneɛma a wɔtaa de di dwuma | Retail blisters, clamshells, trays ne nneɛma a wɔde kyerɛ | Tray ahorow a emu da hɔ, retail blisters ne folding anaa formed packages | Complex hyehyɛe packaging, ɔyɛkyerɛ afã horow ne soronko afã horow |
| Tebea horow a wɔhyehyɛ | PVC -ahyehyee pɔtee, onwini ne nhyehyɛɛ sɔhwɛ | PET -specific drying anaa temperature controls sɛnea grade a wɔapaw no hwehwɛ | PETG -specific forming profile ne sɔhwɛ a wɔawie-ɔfã |
| Ntintim ne nsɔano | Ink, adhesive ne sealing compatibility hwehwɛ sɛ wogye tom | Ntintim ne nsɔano gyina ɔfasu a wɔayɛ ho adwuma ne sɛnea wɔahyehyɛ nneɛma a wɔde ahyɛ mu no so | Saa ara na: paw ink, bonding ne sealing nhyehyɛe sɛnea grade |
| Mmara a ɛfata a ɛfata | Bisa nkrataa a ɛkyerɛ aduan, aduruyɛ anaa nnuruyɛ mu abasobɔde pɔtee | Bisa aduan pɔtee bi a wɔde di nkitaho anaa nkrataa afoforo bere a ɛho hia no | Bisa mmara ho nkrataa a ɛfa nneɛma pɔtee bi ho bere a ɛho hia no |
| Gyinaesi a ɛfa adetɔ ho | Susuw gauge, forming consistency, pefeeyɛ, bo ne nsakrae nhyehyɛe ho | Fa toto pefeeyɛ, ɔkwan a wɔfa so yɛ, nwura ho dwumadie ne grade a ɛwɔ hɔ | Fa draw ahwehwɛde, bo ne finished-part adwumayɛ toto ho |
Clear PVC , PET ne PETG nyinaa betumi adi dwuma wɔ transparent formed packaging mu, nanso ɛnyɛ nneɛma a wotumi sesa . Paw a ɛfata no gyina mfiri nhyehyɛe, nneɛma a wɔde ahyɛ mu no nhyehyɛe, ɔkwan a wɔfa so sɔ nsɔano, mmara a wɔde di dwuma awiei ne nneɛma a adetɔfo no de di kan wɔ adetɔ mu so.
| Beae a Wɔpaw | Thin-Gauge Roll / Krataa | Thicker Thermoforming Krataa |
|---|---|---|
| Nneɛma a Wɔtaa Yɛ | Blisters, clamshells, tray nketewa ne form-fill-seal packaging | Ahobammɔ kataso, tray akɛse, panels ne mfiridwuma mu nneɛma a wɔayɛ |
| Mfiri a Wɔde Yɛ Adwuma | Mfiri a wɔde kyekyere nneɛma a wɔde roll-fed anaa sheet-fed a ɛyɛ kɛse | Mfiri a wɔde vacuum anaa nhyɛso yɛ a wɔde nkratafa ma |
| Nneɛma a Wɔde Di Dwuma a Ɛho Hia | Winding, wɛb tension, ano su, gauge consistency ne sealing | Ɔhyew biakoyɛ, sag, twetwe ratio, ɔfasu thickness, onwini ne trimming |
| Ɔkwan a Wɔfa so Kyerɛkyerɛ | Roll trɛw, roll tenten, core kɛse, gauge ne winding akwankyerɛ | Krataa nsusuwii, gauge, masking, orientation ne ɔfã geometry |
Wɔtaa paw Clear PVC ma nnwinnade, nkyerɛwee, nneɛma a wɔde boa, hardware, ɛlɛtrɔnik ne adetɔfo nneɛma a nneɛma a wotumi hu ne abura a wɔayɛ a ɛyɛ den ho hia. Ɛsɛ sɛ wɔka ɔkwan a wɔfa so siw ano, fold adwumayɛ ne anti-static ahwehwɛde ahorow ho asɛm wɔ asɛmmisa no mu.
Nnuruyɛ mu blister dwumadie hwehwɛ sɛ wɔde ahofama a ɛnyɛ plasticized packaging grade, controlled production environment ne mmara kwan so nkrataa a ɛfata. Ɛsɛ sɛ wɔsɔ nsuo ne oxygen akwansideɛ ahiadeɛ nso hwɛ ɛfiri sɛ ebia mono PVC rentumi mma akwansideɛ a ɛdɔɔso mma aduru biara.
Ebia aduruyɛ-mfiri a wɔde kyekyere nneɛma ho behia sɛ wɔde nsɔano a wɔagye atom, sterilization a ɛne ne ho hyia, ahotew ne biocompatibility ho nkrataa. Ɛsɛ sɛ wɔkyerɛ ɔkwan a wɔfa so de sterilization—te sɛ EtO, radiation anaa steam—ansa na wɔapaw nneɛma.
Aduan a wɔde kyekyere nneɛma hwehwɛ sɛ wɔyɛ aduan a wɔde di nkitaho a wɔagye atom ne nkrataa a wɔde bɛyɛ gua a wɔde kɔ baabi a wɔrekɔ no. Ɛsɛ sɛ wɔde aduan ko, bere a wɔde di nkitaho, ɔhyew, srade a ɛwɔ mu ne sɛ ebia ade no ne aduan di nkitaho tẽẽ ma ma wɔde yɛ adesuakuw no mu nhwehwɛmu.
Wobetumi asusuw PVC krataa a emu da hɔ a ɛyɛ den no ho ahwɛ sɛ ɛwɔ nkataso a ɛbɔ ho ban, tray a ɛwɔ mu, afã horow a wɔde kyerɛ ne mfiridwuma mu nneɛma a wɔapaw. Ɛsɛ sɛ wɔsɔ abɔnten so a ɛda adi, ɔhyew, nsunsuanso, ogyaframa adwumayɛ ne nnuru a ɛka ho hwɛ ma ɔsom tebea ankasa.
Akwahosan Ho Nneɛma a Wɔde Hyehyɛ Nneɛma Mu
Blister ne Tray a Wɔyɛ
Retail Product Nkyerɛkyerɛmu
| Akwammisa ho | Nsɛm a Wɔhwehwɛ Ansa na Wɔapaw Abasobɔde |
|---|---|
| Aduan a Wɔde Di Dwuma | Destination gua, aduan ko, nkitahodi tẽẽ anaa nea ɛnteɛ, ɔhyew ne bere tenten a wɔde di nkitaho |
| Nnuruyɛ mu Blister | Aduru su, akwanside botae, lidding foil, sealing window, mmara ahwehwɛde ne packaging line |
| Aduruyɛ Mfiri | Mfiri no su, ahotew, nneɛma a wɔde kata so, ɔkwan a wɔfa so yɛ sterilization, shelf-life validation ne destination gua |
| Mfiridwuma mu Nneɛma a Wɔde Gu Nneɛma Mu | Aguade no mu duru, anoano a ano yɛ nnam, nnuru a ɛda adi, ɔhyew a wɔde sie, nsɔano ne akwantu tebea |
Ɛsɛ sɛ wɔde mmara a wodi so no bata nneɛma a wɔde yɛ adwuma no mu grade pɔtee ne mprempren nkrataa a ɛfoa so no ho. Ɛnsɛ sɛ wɔde adansedie krataa a ɛfa aduru baako, ne kɛseɛ anaa beaeɛ a wɔyɛ no ho di dwuma ara kwa wɔ PVC nneɛma a emu da hɔ nyinaa so.
Kyerɛkyerɛ ɔfã a wɔawie no mu: Fa cavity bun, draw ratio, corner radii, ɔfasu-thickness botae, nsusuwii ne sɛnea wopɛ sɛ wode bedi dwuma ma.
Si nnwinnade no so dua: Ka sɛ ebia wɔde roll-fed anaasɛ sheet-fed na ɛma production na sɛ wɔde vacuum, pressure anaa plug-assist forming na edi dwuma.
Paw afiri a wɔde susuw nneɛma a wode fi ase: Bu nneɛma a ehia na ama ɔfasu no mu duru a ɛba fam koraa mu bere a woatrɛw awie no ho akontaa.
Fa nneɛma no yɛ nea ɛfata: Fa nkratafa anaa nhoma mmobɔwee sie na ma ɛyɛ nea ɛfata wɔ tebea horow a wɔahyɛ da ayɛ mu ansa na woabue.
Yɛ ɔhyew ho nsɛm: Fa ɔhyew afiri a ɛwɔ soro ne fam nhyehyɛe, bere a wɔde tra hɔ ne krataa no hyew si hɔ denam sɔhwɛ ahorow so.
Optimize forming ne cooling: Sesa vacuum, nhyɛso, plug kankan, nkuku hyew ne onwini bere.
Validate secondary operations: Hwɛ sɛnea wotwa, nsɔano, wotintim, wobobɔw, woboaboa ano na woyi berebuw fi mu.
Wɔpene nhwɛsoɔ a wɔde yɛ nneɛma so: Hwɛ sɛnea emu da hɔ, ɔfasuo mu nkyekyɛmu, ntwitwiridii, nkɛntɛnsoɔ, nsusuiɛ ne sɛdeɛ wɔde di dwuma awieeɛ no so ansa na wɔde ama dodoɔ.
Mfɛnsere a ɛteɛ a wɔde yɛ adwuma no gu ahorow sɛnea wɔayɛ, ne kɛse, mfiri no nhyehyɛe, ɔhyew afiri no su, kyinhyia ahoɔhare, nkuku geometry ne tebea horow a atwa yɛn ho ahyia. Heater setpoint nso nyɛ ade koro ne krataa no hyew ankasa. Esiane eyi nti, Wallis kamfo kyerɛ sɛ wofi ase fi grade a wɔapene so no akwankyerɛ a ɛfa sɛnea wɔyɛ nneɛma ho no so na wɔmfa sɔhwɛ ahorow a wɔahyɛ da ayɛ no mfɛnsere a wɔyɛ no yiye no nyɛ papa.
Nsɛnkyerɛnne a ɛkyerɛ sɛ ɔhyew a ɛnnɔɔso no betumi ayɛ nea enni mũ, emu adwennwen a ɛboro so anaasɛ nsɛm a ɛkɔ akyiri a ɛnyɛ yiye. Ɔhyew a ɛboro so betumi ama wɛb no ayɛ mmerɛw, ayɛ bata, gloss ayera, ahurututu, kɔla asakra anaasɛ ɔfasu no ayɛ mmerɛw a ɛnyɛ pɛpɛɛpɛ.
Sɛ worebɔ sintɔ bi ho amanneɛ a, kyɛ krataa no grade ne ne kɛse, lot nɔma, mfonini ahorow, nkuku mfonini, heater nhyehyɛe, krataa no hyew a wɔasusuw, bere a wɔde kyinhyia ne beae a ɔfã a ɛka no na ama wɔasiesie mfiridwuma mu ɔhaw ahorow ntɛmntɛm.
| Ɔhaw a wɔahu | Nea ebetumi de aba | Nea ɛsɛ sɛ wodi kan hwɛ sɛ ɛyɛ nokware |
|---|---|---|
| Cavity nkyerɛase a enni mũ | Krataa no hyew ankasa a ɛnnɔɔso, vacuum a ɛtwetwe, nhyɛso a ɛnnɔɔso anaasɛ bere tiaa a wɔde yɛ | Sua krataa no mu hyew; hwɛ vacuum akwan ne bere a wɔde yɛ adwuma |
| Ntwea a ɛyɛ tratraa anaa afasu a ɛyɛ mmerɛw | Draw ratio a ɛkorɔn, ntwea so nnam, gauge a ɛmfata anaa plug-assist geometry | Sua ɔfasu no mu duru a ɛba fam koraa; hwɛ cavity nsusuwii ne plug akwantu |
| Fitaa anaa adwennwen agyiraehyɛde ahorow | Draw a ɛboro so, awɔw a ɛyɛ, geometry a ano yɛ nnam anaasɛ PVC grade a ɛmfata | Hwɛ sɛnea ɔhyew no yɛ pɛ ne ne kɛse; fa toto abasobɔde nhwɛsode foforo ho |
| Sag a ɛboro so, a ɛbata ho anaasɛ ɛyɛ akisikuru | Ɔhyew a ɛboro so, tra a ɛtra hɔ kyɛ dodo, efĩ anaa adeyɛ/nneɛma a ɛnhyia | Hwɛ heater profile ne ɔhyew ankasa a ɛwɔ soro |
| Warping akyi demolding akyi | Onwini a ɛnyɛ pɛpɛɛpɛ, nneɛma a ɛkɔ so, nhyɛso a aka anaasɛ nea wɔatwitwa ntɛm | Hwɛ sɛ nkuku no yɛ nwini na gyae hyew |
| Mununkum, ahum anaasɛ nea emu nna hɔ a enye | Raw-material nsakrae, ɔfasu a ɛsɛe, ɔhyew a ɛboro so, condensation anaa efĩ | Hwɛ krataa a ɛba no mu na san yɛ sɔhwɛ a ɛma adwennwen sua |
| Nsɔano a wontumi mfa ho nto so anaasɛ ink a wɔatintim a ɛnyɛ papa a ɛbata ho | Surface treatment, ink/adhesive a ɛnhyia, nsɔano tebea a ɛnteɛ | Sɔ nsɔano/tintim nhyehyɛe a edi mũ no hwɛ denam abasobɔde a wɔapene so no so |
Mfomso koro no ara a ɛda adi sɛ ebetumi de nneɛma pii aba. Fa controlled process trial di dwuma sen sɛ wobɛsesa nhyehyɛe pii bere koro mu.
| Nneɛma a ɛyɛ den | Bɛyɛ 0.20–3.00mm, ɛgyina grade, format ne MOQ so |
| Trɛw ne Ne Tenten | Roll trɛw kɔ 2050mm na wɔadan krataa akɛseɛ a ɛgyina sɛ wɔayɛ no so dua |
| Kɔla ne Tint | Neutral pefee, bruu tint ne customized transparent anaa opaque kɔla ahorow a ɛhyɛ MOQ ase |
| Surface ne Ayaresa a Wɔde Yɛ Adwuma | Gloss, printing treatment, anti-static options anaa dwumadie foforɔ a ɛgyina grade a ɛwɔ hɔ so |
| Roll Nsiesiei a Wɔde Yɛ Adwuma | Core kɛse, roll tenten, winding akwankyerɛ, splice mmara ne pallet nhyehyɛe |
| Nneɛma a wɔde kyekyere nneɛma | PE ahobammɔ, nsu-resistant wrapping, cartons, nnua pallets ne amanne nkyerɛwde |
Ɛsɛ sɛ adetɔ ho nkyerɛkyerɛmu a mfaso wɔ so ka ne kɛse ne abodwokyɛre, asau trɛw, kɔla/tint, optical target, formability, roll direction, core size, packaging ne intended application . Bisa nneɛma nhwɛsode a ɛne tebea horow yi hyia.
| Inspection item | Verification a wɔkamfo kyerɛ | Nea enti a ɛho hia |
|---|---|---|
| Gauge ne cross-web profile | Micrometer anaa calibrated in-line thickness data wɔ mmeae a wɔapene so | Supports predictable ɔhyew, twetwe ne wie ɔfasu thickness |
| Sɛnea ɛte wɔ aniwa so | Honam fam nhwɛsode a wɔapene so, haze/transmission data sɛ ɛho hia a, aniwa a wɔde hwɛ sɛnea specks ne gels te | Ɛtew nneɛma a wɔde kyerɛ a ɛnkɔ so pɛpɛɛpɛ ne aniwa mu sintɔ ahorow a wontumi nnye ntom so |
| Dimensional tebea | Roll trɛw, krataa tenten, anoano trim, winding, flatness ne squareness | Ɛboa ma wɔkɔ so kyerɛw wɔn din na wɔde mfiri a wɔde ma aduan a ɔhaw biara nni ho |
| Forming sɔhwɛ | Run ananmusifo cavities ne botae ɔhyew ne nkuku nhyehyɛe; hwɛ baabi a ɛyɛ tratraa sen biara | Hwɛ sɛ forming adwumayɛ wɔ realistic geometry ase |
| Checks a wɔhyehyɛ akyi | Hwɛ ntwea so fitaa, adwennwen agyiraehyɛde, warping, mpaapaemu a ɛko tia ne stacking | Siw sintɔ ahorow a ɛbɛda adi bere a wɔretwitwa, wɔrehyehyɛ anaa wɔde rekɔma no ano |
| Ntintim ne nsɔano | Sɔ ink, tintim ayaresa, lidstock, adhesives ne seal ahoɔden hwɛ sɛ ɛfata a | Si so dua sɛ downstream processing no hyia |
| Grade ho nkrataa a wɔde kyerɛw | Hwɛ batch identity ne application-specific nkrataa a wɔabisa wɔ order no mu | Siw mfiridwuma mu nkyerɛwde a wɔde di dwuma ɔkwammɔne so wɔ dwumadie a wɔahyɛ ho mmara mu ano |
Sɛ wopɛ sɛ wodi nneɛma a wɔyɛ a, wo ne nea ɔde ma no nnye ɔkwan a wɔfa so susuw nneɛma, anohyeto a wɔde gye tom ne nhwɛsode a wɔde gyina so no nyɛ adwene. Nhwehwɛmu ahorow a edidi so yi yɛ mfiase a mfaso wɔ so; akontaabu mu abodwokyɛre pɔtee gyina abasobɔde ne apam a wɔapene so no so.
Thickness inspection: Hwɛ average gauge ne profile wɔ wɛb anaa krataa no nyinaa so.
Optical inspection: Hwɛ haze, transparency, tint, tuntum nsensanee, gels, nsensanee ne nsuo a ɛsen agyiraeɛhyɛdeɛ.
Dimensional control: Hwɛ sɛ ne tɛtrɛtɛ, ne tenten, ne ano yɛ papa, ne squareness ne roll winding.
Ɔhyew suban: Si so dua sɛ shrinkage, sag, forming mmuae ne cooling stability wɔ ananmusifo nnwinnade so.
Mfiri adwumayɛ: Sɔ nkɛntɛnso, tensile anaa nneɛma afoforo a ɛhwehwɛ wɔ dwumadie a wɔawie no hwɛ.
Nsakraeɛ nhwehwɛmu: Fa die-cutting, sealing, printing, folding ne de-nesting di dwuma wɔ baabi a ɛfata.
Nwoma: Si adansedie a ɛfa grade pɔtee bi ho, batch identification ne sɔhwɛ amanneɛbɔ a wɔapene so no so dua.
Wide specification range: Wobetumi aka Thin-gauge packaging film ne thicker thermoforming krataa.
Custom conversion: Wobetumi de rolls, sheets, widths, lengths ne packaging ahyia ne production ahiade.
Sample-first supply: Adetɔfo betumi asɔ forming, pefeeyɛ, sealing ne trimming ahwɛ ansa na bulk orders.
Dwumadie no mu nhwehwɛmu: Wɔsusu dwumadie a ɛtwa toɔ, mfiri, nkukuo ne mmara sodiɛ ahiadeɛ ho ansa na wɔakamfo abasobɔdeɛ akyerɛ.
Nneɛma a wɔde kyekyere nneɛma a wɔde kɔ amannɔne: Nneɛma a wɔde kyekyere nneɛma ho ban boa amanaman ntam nneɛma a wɔkora so ne akwantu.
B2B adwuma no mmoa: Ɛfata ma thermoformers, packaging converters, importers ne nneɛma kyekyɛfo.
Ɛsɛ sɛ production ne packing bɔ clear PVC ho ban fi mfutuma, nsensanee, nsuo, ɔhyew ne deformation ho. Nneɛma a wɔde roll no hia ahobammɔ a wɔhwɛ so wɔ winding ne anoano ho, bere a ɛsɛ sɛ wɔde nkratafa no boaboa ano petee na wɔbɔ ho ban na ama wɔatumi atew bere a wɔde remena no.
Clear PVC krataa Nneɛma a Wɔyɛ ne Nsakrae
Nneɛma a Wɔde Kɔ Amannɔne a Ɛbɔ Ho Ban
Sɛ worebisa ɔkwan foforo a, ka ade a wɔde kyekyere nneɛma, gua a wɔde kɔ, mfiri a wɔde yɛ nneɛma, nhyehyɛe a wɔde siesie nneɛma ne nkrataa a wɔhwehwɛ. Afei Wallis betumi asusuw krataa anaa sini abasobɔde a ɛfa ho no ho de ayɛ nhwɛsode sɔhwɛ.
Wallis nso de nneɛma ma pefee PET thermoforming nkrataa ma adetɔfo a wɔde toto rigid packaging substrates, ne nnuruyɛ PVC blister film ma nnwuma a ɛhwehwɛ pɔtee sɛ wɔde nnuru-packaging grade a wɔagye atom.
Finished product ne nnwuma a wɔde di dwuma awiei.
Nea ɛhwehwɛ sɛ ɛyɛ kɛse, ne tɛtrɛtɛ, ne tenten anaa ne roll nhyehyɛe.
Kɔla a emu da hɔ, tinted anaasɛ customized kɔla ahwehwɛde.
Thermoforming afiri su ne krataa anaa nhoma mmobɔwee trɛw a ɛsen biara.
Cavity bun, draw ratio, nkuku nsusuwii ne ɔfasu botae a ɛba fam koraa.
Printing, sealing, folding, die-cutting anaa anti-static ahwehwɛde ahorow.
Aduan, nnuruyɛ, aduruyɛ anaa ahwehwɛde afoforo a wɔde di so.
Ɔsram biara dodow, nhwɛsode kɛse ne nhyehyɛe a wɔhwɛ kwan sɛ wɔde bɛma.
Ɔkwan a wɔfa so de nneɛma gu, hyɛn gyinabea a wɔde kɔ ne aguadi ho nsɛm.
Ka Wo Thermoforming Dwumadi no ho asɛm
Mprempren kratafa no kyerɛw bɛyɛ 0.20–3.00mm. Sɛnea ɛwɔ hɔ no gyina grade, width, roll anaa sheet format ne order volume so, enti ɛsɛ sɛ wɔsi abodwokyɛre a wɔhwehwɛ no so dua wɔ quotation no mu.
Wɔakyerɛw ntrɛwmu a ɛkɔ 2050mm, a egyina ne kɛse, ne grade ne ne production confirmation so. Yɛsrɛ sɛ fa wɛb trɛw a wotumi de di dwuma ne edge-trimming ahwehwɛde no ma.
Ɔhyew biako biara nni hɔ a ɛfa PVC nnuru ne afiri biara ho. Ɛsɛ sɛ wɔde grade, thickness, heater system, mold ne cycle speed a wɔapaw no na ɛyɛ ɔhyew profile no. Ɔhyew ankasa a ɛwɔ krataa so no yɛ nea ntease wom sen ɔhyew a wɔde si hɔ no nkutoo.
Ɛsɛ sɛ wɔde aduan a wɔde di nkitaho a wɔahyɛ no den a wɔakyerɛw nkrataa a ɛfata nkutoo na edi dwuma. Ka gua a worekɔ, aduan ko, ɔhyew a wɔde di nkitaho ne bere tenten a wɔde di nkitaho bere a worebisa nneɛma no.
Ebia PVC sini a ɛyɛ den a wɔde yɛ nnuru a wɔde yɛ adwuma no bɛfata bere a wɔahyɛ mmara ne nneɛma a wɔde kyekyere nneɛma mu a wɔagye atom akyi. Ɛsɛ sɛ wɔsan hwɛ akwanside ahwehwɛde ahorow mu efisɛ ebia mono PVC behia PVDC anaa akwanside nhyehyɛe foforo ama nneɛma a ɛyɛ nwini.
Wobetumi de aduruyɛ mu nneɛma a wɔde kyekyere nneɛma ho grade a ɛfata adi dwuma sɛ wɔgye nsɔano, ahotew, sterilization ne mmara mu ahwehwɛde ahorow tom a. Ɛsɛ sɛ wɔda ɔkwan a wɔpɛ sɛ wɔfa so de sterilization adi ansa na wɔapaw grade.
Aane. Amanneɛbɔ thickness, trɛw, roll tenten, krataa dimensions, core kɛse, winding akwankyerɛ, kɔla ne packaging betumi asusuw sɛnea production feasibility ne MOQ.
Ebia wobetumi atintim na wɔasɔw ano denam ɔfasu no ho aduru ne ɔkwan a ɛfata a wɔfa so yɛ no so. Ɛsɛ sɛ wɔsɔ ink, adhesive, lidding material, sealing equipment ne final bond ahoɔden hwɛ ansa na wɔayɛ.
Fa nneɛma sie a wɔatoto mu, ayɛ nwunu na wɔabɔ ho ban afi owia hann, ɔhyew, mfutuma ne honam fam ɔsɛe ho. Ɛsɛ sɛ nkratafa kɔ so yɛ petee, na ɛsɛ sɛ wɔboa nhoma mmobɔwee no na wodi ho dwuma sɛnea emu duru ne nea ɛwɔ mu titiriw te.
Aane. Wɔkamfo nhwɛsode sɔhwɛ kyerɛ ma ɔhyew, forming bun, ɔfasu kyekyɛ, pefeeyɛ, shrinkage, trimming, sealing ne finished-part adwumayɛ.
Nea ɛtaa de ba ne draw ratio a ɛboro so, ɔhyew a ɛnyɛ pɛpɛɛpɛ, starting gauge a ɛmfata, sharp mold geometry, plug-assist design a enye ne forming ahoɔhare a ɛnteɛ. Ɛsɛ sɛ wɔyɛ nneɛma ne nnwinnade no yiye sɛ nhyehyɛe biako.
Fa dwumadie, grade anaa compliance ahwehwɛdeɛ, thickness, trɛw, format, dodoɔ, forming machine, part geometry, secondary processes, packaging ne destination ma.
Ebia PVC nneɛma a wɔde yɛ nneɛma a ɛyɛ den a ɛho tew, a wɔatew mu no betumi asan de adi dwuma denam PVC nsuten a ɛfata a wɔde san de di dwuma so. Nneɛma a wɔboaboa ano, hyehyɛ ne nea wogye tom wɔ gua awiei no gu ahorow wɔ ɔmantam biara mu. Ebia nneɛma a wɔde kyekyere nneɛma a wɔatintim, wɔakata so, afrafra anaasɛ efĩ wom no behia sɛ wodi ho dwuma foforo.
Ɛgyina abasobɔdeɛ ne baabi a wɔapene so no, adetɔfoɔ bɛtumi abisa mfiridwuma ho nsɛm krataa, batch identification, dimensional inspection records ne application-specific regulatory documents a ɛfa ho. Ɛsɛ sɛ wosi so dua sɛ ɛwɔ hɔ ma ade pɔtee a wɔde bɛkɔ ne nea wɔde bɛmena.
Wobetumi asusuw abasobɔde a ɛfata ho ama deep-draw cavities, nanso draw ratio, corner radii, starting gauge ne plug-assist design na ɛhwɛ ɔfasu kyekyɛ a etwa to no so. Ɛho hia sɛ wɔyɛ ananmusifo nkuku sɔhwɛ ansa na wɔapene dodow no so.
Wɔyɛ polymers ahorow a ɛsono sɛnea wɔyɛ no ne mfɛnsere a wɔde yɛ adwuma. Paw gyina ɔfã a wɔawie geometry, thickness, transparency ahwehwɛde, sealing kwan, mpɔtam hɔ packaging mmara ne mfiri ankasa. Wɔkamfo kyerɛ sɛ wɔnyɛ nhwɛsode a wɔde bɛsɔ ahwɛ wɔ nkyɛnkyɛn.
Di Wallis Plastic nkitaho na susuw PVC nkratafa anaa film rolls a emu da hɔ a ɛyɛ den ho ma blister packaging, clamshells, trays ne custom formed parts. Yɛn kuw no boa thermoforming adwumayɛbea ahorow, packaging converters, importers ne distributors ne nhwɛsode nhwehwɛmu, amanne specifications ne factory-direct B2B supply.
Bisa Nhwɛsode ne Factory Quote
