|
PVC
WALLIS
| mfasoɔ a wotumi de ho to so: | |
|---|---|
| Dodow: | |
Wallis de nnuru a ɛyɛ den PVC blister film ne krataa a ɛyɛ den ma tablet, capsule, vitamin, nutraceutical, mmoa ne akwahosan ho nneɛma a wɔapaw. Rigid PVC forming web no ma optical pefee, dimensional stability ne controlled thermoforming adwumayɛ ma amanne kwan so nnuru blister production.
Wallis nnuruyɛ PVC wɔ hɔ a ne kɛse bɛyɛ 0.15–0.80 mm ne ne tɛtrɛtɛ bɛyɛ 680 mm , a ɛwɔ hɔ a ɛyɛ mmerɛw, ɛyɛ kɔla, kɔla, ɛnyɛ hann, ɛhyerɛn ne nea ɛyɛ matte a wobetumi apaw sɛnea adwuma no ahwehwɛde te.
Wɔpaw plain rigid PVC titiriw wɔ baabi a ɛho hia sɛ wɔde thermoformability pa, pefeeyɛ, mfiri ahobammɔ ne ɛka a wɔbɔ no yiye na nnuru a wɔde yɛ no nhia sɛ wɔde nsu anaa oxygen akwanside a ɛkɔ anim. Ɛsɛ sɛ wɔde PVC /PVDC, PVC /PE/PVDC, PC TFE-based anaa nhyehyɛe afoforo a ɛwɔ akwanside a ɛkorɔn susuw nneɛma a ɛyɛ mmerɛw kɛse ho sɛnea stability data kyerɛ.
Nneɛma a edidi so yi gyina hɔ ma mprempren Wallis nneɛma ahorow a wɔtaa yɛ no. Ɛsɛ sɛ wɔsi nsɛm a etwa toɔ, abodwokyɛreɛ ne sɔhwɛ akwan so dua sɛdeɛ nnuru a wɔde kyekyere nneɛma a wɔapene soɔ ne adetɔ ho nkyerɛkyerɛmu teɛ.
| Parameter | Typical Nkyerɛkyerɛmu / Nsɛm a Wɔahyɛ no Nsow |
|---|---|
| Adwadeɛ | Nnuru a Ɛyɛ Den PVC Blister Film / PVC Krataa a Ɛyɛ Den |
| Atadeɛ | Rigid PVC a wɔayɛ ama nnuruyɛ mu blister packaging dwumadie |
| Nneɛma a ɛyɛ den | Bɛyɛ 0.15–0.80 mm |
| Ntrɛmu | Ɛkɔ bɛyɛ mm 680; customized slitting a ɛwɔ hɔ |
| Ahosuo | Transparent, tinted, kɔla anaasɛ opaque |
| Surface Finish a Wɔde Awie | Glossy, matte anaasɛ wɔayɛ no sɛnea wɔpɛ awie |
| Nsuo a Wɔtwetwe | Mprempren Wallis nkyerɛkyerɛmu lists ≤0.1%; si sɔhwɛ kwan a wɔfa so nya abasobɔde a wɔahyɛ no so dua |
| Ahoɔden a Wɔde Tensile | Mprempren Wallis nkyerɛkyerɛmu no kyerɛ ≥48 MPa; si akwankyerɛ ne sɔhwɛ kwan a wɔfa so yɛ no so dua ma abasobɔde a wɔahyɛ no |
| Nneɛma a wɔde yɛ ɔhyew | Wɔayɛ no ama nnuruyɛ mu blister thermoforming akwan a ɛne no hyia |
| Lidding a ɛne ne ho hyia | Nhyehyɛe ahorow a ɛne ne ho hyia betumi de aluminium a wɔde kata so a wɔde ɔhyew-nsɔano lacquer a wɔayɛ ama PVC adi dwuma. |
| Nneɛma a Wɔde Ma no Format | Nwoma mmobɔwee; krataafa ahorow a wɔasakra no gyina adwuma no so dua |
| Nnwuma a Wɔde Di Dwuma | Tablet, capsule, aduannuru, mmoa ne akwahosan ho akisikuru a wɔapaw |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Thickness, trɛw, kɔla, wie, roll dimensions, core kɛse ne export packaging |
Nnuru a Ɛyɛ Den PVC Blister Film
PVC Nnuru a wɔde kyekyere nneɛma ho Film
Pharmaceutical rigid PVC film yɛ thermoformable plastic forming web a wɔde yɛ cavities wɔ amanne kwan so blister packages mu. Wɔma ade no yɛ hyew, wɔyɛ no twa abura no geometry a wɔhwehwɛ no ho hyia, de nnuru no hyɛ mu ma na afei wɔde ade a wɔde kata so a ɛne no hyia kata so.
PVC ma blister cavity no nhyehyeɛ nnyinasoɔ. Ne kateeyɛ boa kotoku a wɔayɛ no ma ɛkɔ so kura ne nsusuwii mu bere a wɔrehyɛ mu ma, wɔakata so, wɔretwitwa, wɔde ahyɛ kartɔn mu, wɔde rekɔ ne sɛnea wɔde di dwuma no.
Clear PVC ma tablet anaa capsule no kɔ so da adi fa blister no mu, ɛboa aduru a wɔde hu ne aniwa nhwehwɛmu. Wobetumi nso aka PVC a ɛwɔ kɔla anaa nea ɛnyɛ hann ho asɛm wɔ baabi a ɛho hia sɛ wɔde aniwa mu nsonsonoe anaa hann di dwuma.
Wosusuw plain rigid PVC ho kɛse wɔ baabi a nnuru a wɔde yɛ nnuru no wɔ akwanside a ɛyɛ mmerɛw koraa na mfiridwumayɛfo a wɔyɛ nneɛma a wɔde kyekyere nneɛma ho no de thermoformability, pefeeyɛ, mfiri adwumayɛ ne ɛka a wɔbɔ no di kan.
Saa nsonsonoe yi ho hia bere a wɔrepaw nnuru a wɔde kyekyere nneɛma ho no. Nneɛma a ɛtwetwe nsu a ɛba fam no nkyerɛ ara kwa sɛ sini no ma akwanside kɛse bi ma nsu a ɛyɛ hyew a ɛbɛfa ade a wɔde ahyɛ mu no mu.
Nsu a wɔtwetwe no susuw nsu dodow a polymer no ankasa twetwe wɔ sɔhwɛ tebea bi a wɔakyerɛkyerɛ mu mu. Mprempren Wallis nkyerɛkyerɛmu no kyerɛ sɛ ɛsom bo ≤0.1% ma saa ade yi.
WVTR kyerɛkyerɛ sɛnea nsuo a ɛyɛ hyew fa ade a wɔde kyekyere nneɛma mu wɔ ɔhyew ne ɔhyew tebea a wɔakyerɛkyerɛ mu mu. Eyi yɛ metric a ɛfata kɛse bere a wosi gyinae sɛ ebia nnuru a wɔde yɛ akisikuru ma ahobammɔ a ɛfata ma aduru a ɛma nsu yɛ hyew no.
Plain PVC betumi afata ama nnuru a ɛyɛ den kakra a wobetumi anya nsu akwanside a ɛho hia no denam nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe a edi mũ ne nhyehyɛe a wɔagye atom a ɛbɛma wɔatumi agyina pintinn no so.
Nnuru a ɛyɛ nsuo a ɛhwɛ nsuo mu, ɛyɛ nsuo a ɛyɛ nwini kɛseɛ anaa oxygen a ɛyɛ mmerɛw no betumi ahia PVC /PVDC, PVC /PE/PVDC, PC sini a egyina TFE so, aluminium a ɛyɛ nwini anaa ɔdan foforɔ a ɛwɔ akwansideɛ a ɛkorɔn.
Thermoforming adwumayɛ yɛ ade titiriw biako nti a rigid PVC da so ara de di dwuma kɛse ma nnuru a wɔtaa de yɛ akisikuru. Nneɛma a wɔde yɛ adwuma, ɔhyew suban, nkuku nhyehyɛe ne mfiri nhyehyɛe bom yɛ adwuma de kyerɛ cavity a wɔawie no su.
Film no mu duru a ɛkɔ so daa no boa ma wɛb no yɛ hyew pɛpɛɛpɛ wɔ ne tɛtrɛtɛ mu, na ɛtew nsakrae a ɛda akisikuru no ntam na ɛboa aguadi mu nneɛma a wɔyɛ no pintinn.
Tebea horow a ɛfata a wɔde yɛ ade boa ma wonya abura a wɔakyerɛkyerɛ mu yiye a enni teateaa dodo, ɛkyinkyim anaasɛ adwennwen agyiraehyɛde a wɔmpɛ.
Abura a emu dɔ no hwehwɛ PVC sini no kɛse efisɛ ade no trɛw kɛse wɔ nkyɛnkyɛn ne ntwea so. Ɛsɛ sɛ adetɔfo de tablet anaa capsule no nsusuwii ne cavity depth ma bere a wɔresusuw PVC nkyerɛkyerɛmu foforo ho no.
Wobetumi asusuw nnuru PVC sini ahorow a ɛfata ho wɔ mfiri a ɛkyinkyini ne mpa a ɛyɛ tratraa a ɛma akisikuru so. Esiane sɛ ɛsono ɔhyew profiles, forming cycles ne web handling wɔ mfiri ahorow ntam nti, ɛsɛ sɛ grade a etwa to no fata wɔ production line ankasa no so.
Alu- PVC blister packaging a wɔtaa de di dwuma no taa de aluminium lidding foil a ɛkura heat-seal lacquer a wɔayɛ sɛ ɛbɛkyekyere PVC forming web no di dwuma. Enti ɛsɛ sɛ wɔsɔ PVC -ne-lidding nkabom a edi mũ no hwɛ sɛ packaging nhyehyɛe biako.
Ɛnyɛ aluminium foil biara na ɛde ɔhyew-nsɔano ade koro no ara na edi dwuma. Ɛsɛ sɛ adetɔfo de lidding-foil specification ankasa ma bere a wɔfata sɛ wɔyɛ PVC blister film foforo no.
Ɛsɛ sɛ wɔyɛ seal temperature optimized bom ne nhyɛso, tra bere ne production ahoɔhare. Mfɛnsere a wɔde di dwuma a mfaso wɔ so so wɔ mfaso sen sɛ wobɛfa no sɛ ɔhyew biako a wɔde hyɛ mu no yɛ adwuma wɔ nhama biara so.
Ɛsɛ sɛ wɔde adetɔfo no ankasa forming web, lidding material ne aguadi packaging tebea horow hwɛ seal ahoɔden, channels, leakage ne blister integrity nyinaa.
Rigid PVC betumi ama thermoforming suban a wɔahyɛ so ama tablet ne capsule blister cavities a wɔtaa de di dwuma bere a ne kɛse, nneɛma grade ne tebea a wɔde yɛ adwuma no hyia yiye.
Transparent PVC ma kwan ma wotumi hu afiri no pefee na ebetumi aboa ma wɔaboa nsa anaa afiri a wɔde hwɛ aniwa so wɔ tablets ne capsules ho.
Rigid structure no boa stable cavity dimensions bere a downstream filling, sealing, twa ne cartoning adwumayɛ.
PVC ma mfasoɔ a ɛwɔ so a ɛko tia nnuru pii a wɔtaa hyia wɔ berɛ a wɔde nneɛma a wɔde kyekyere nneɛma ho dwuma sɛdeɛ ɛteɛ no. Nanso ɛsɛ sɛ wɔhwehwɛ sɛnea ɛne nnuru pɔtee a wɔayɛ, nnuru a wɔde tew nneɛma ho anaa nneɛma foforo a ɛka bom no hyia wɔ baabi a ɛfata.
Wɔ formulations a enhia akwanside nhyehyɛe a ɛkɔ anim no, plain rigid PVC ma ɛkari pɛ a mfaso wɔ so wɔ formability, visibility, mfiri ahobammɔ ne nneɛma ho ka mu.
Wobetumi aka thickness, roll width, color, surface finish, core size ne roll configuration ho asɛm sɛnea blister afiri ne pack a wɔawie no te.
Wɔtaa susuw plain rigid PVC ma stable oral solid dosage products a amanne kwan so transparent thermoformed blister ma ahobammɔ a ɛdɔɔso.
PVC nso wobetumi ayɛ no capsule cavities. Ebia capsules akɛse bɛhwehwɛ sɛ wɔpaw film no mu duru ne tebea horow a ɛbɛhyehyɛ no yiye efisɛ cavity bun ma nneɛma no trɛw yɛ kɛse.
Vitamins ne nnuru a wɔde ka ho a ɛwɔ stability profile a ɛfata betumi de PVC blisters a ɛda adi anaasɛ ɛwɔ kɔla adi dwuma wɔ baabi a wonya nsu ne oxygen ahobammɔ a wɔhwehwɛ no denam nhyehyɛe a edi mũ a wɔde kyekyere nneɛma so no so.
Mmoa ho nnuru a wɔapaw, capsules ne nneɛma afoforo a wɔde dodow a ɛyɛ den ma nso betumi de PVC blister packaging a ɛyɛ den adi dwuma bere a wɔadi aduru pɔtee bi ho ahwehwɛde akyi.
Wobetumi nso asusuw Rigid PVC ho ama akwahosan ho nhyehyɛe a wɔapaw a ɛnyɛ sterile ne adetɔfo nneɛma a wɔde kyekyere nneɛma. Sterile aduruyɛ-mfiri a wɔde kyekyere nneɛma hwehwɛ sɛ wɔtew nneɛma, nkataso, nsɔano mudi mu kura ne sterilization a ɛne ne ho hyia no ho adanse soronko.
Tablet Blister Nneɛma a Wɔde Gu Nneɛma Mu
Capsule Blister Nneɛma a Wɔde Gu Nneɛma Mu
PVC kɛseɛ a ɛfata no gyina cavity geometry, product dimensions, kotokuo rigidity a wɔhwehwɛ ne blister-machine tebea so. Wallis de 0.15–0.80 mm a ɛtrɛw ma, nanso nnuru a wɔde yɛ akisikuru a wɔde di dwuma no taa de ɔfã a ɛfata ma ade pɔtee no nkutoo na edi dwuma.
Mpɛn pii no, tablet akɛse ne capsules hwehwɛ sɛ ɛwɔ abura akɛse na ebia ebehia PVC gauge soronko wɔ tablet nketewa ho.
Sɛnea ɛyɛ kɛse no mu dɔ ma ɛyɛ teateaa kɛse wɔ abura no fasu no so. Enti ɛsɛ sɛ wɔsɔ cavity ahoɔden a wɔawie no hwɛ sen sɛ wɔbɛpaw film afi nea wɔfrɛ no flat-film thickness nkutoo mu.
Mfiri ahorow a wɔde yɛ akisikuru de ɔhyew ne nea ɛyɛ kyinhyia ahorow di dwuma. Fa wo mprempren nneɛma no kɛse ne mfiri no mfonini ma bere a woresesa obi foforo a ɔde nneɛma ma no.
Ɛsɛ sɛ abura a etwa to no ma ahobammɔ a ɛdɔɔso wɔ nhyehyɛe mu bere a wɔde ahyɛ mu ma, wɔretoto mu, wɔde nneɛma a ɛto so abien ahyɛ mu ne bere a wɔde nneɛma a ɛho nhia nni dwuma.
| Nneɛma | a Wɔde Di Dwuma Mfaso Titiriw | Typical Selection Logic |
|---|---|---|
| Ɛyɛ katee PVC | Ɛda adi pefee, thermoformability ne ɛka a wɔbɔ no yiye | Nnuru a ɛyɛ den a akwanside a wɔhwehwɛ no sua koraa |
| PVC /PVDC a ɛwɔ hɔ | Nsu ne oxygen akwanside a ɛkɔ anim | Nneɛma a ɛma nsu anaa oxygen te a ɛhwehwɛ sɛ wɔde akisikuru a ɛda adi pefee |
| PVC /PE/PVDC na ɛyɛ adwuma | Barrier a wɔaka abom ne multilayer foforo a ɛyɛ anaasɛ nsɔano dwumadi | Forming ne akwanside ahwehwɛde ahorow a ɛyɛ den kɛse |
| PC TFE-Gyina Sini | Nsuo akwansideɛ a ɛkorɔn paa berɛ a ɛkura transparency | Nnuru a wɔde yɛ nnuru a ɛyɛ nwini kɛse |
| Aluminium a Ɛyɛ Nwini | Nsuo a ɛkorɔn paa, gas ne hann ahobanbɔ | Nnuru a ɛyɛ mmerɛw kɛse wɔ baabi a ɛho nhia sɛ wɔyɛ nea ɛda adi pefee |
Ɛnyɛ akwanside a ɛkorɔn sen biara nhyehyɛe no nyɛ nneɛma a wɔde kyekyere nneɛma a eye sen biara a wɔpaw. Ɛsɛ sɛ nhyehyɛe a ɛteɛ no di aduru no ahwehwɛde a ɛma ɛyɛ den no ho dwuma bere a ɛkari pɛ wɔ forming efficiency, blister size, line productivity ne total packaging cost.
Transparent PVC ma wotumi hu ade no kɛse na ɛfata wɔ baabi a ɛsɛ sɛ tablets anaa capsules kɔ so da adi denam blister a wɔawie no so.
Wobetumi aka amber, blue, green anaa tinted formulations afoforo ho asɛm ama nsonsonoe a ɛda aniwa so. Baabi a ade no te hann nka no, ɛsɛ sɛ wɔma hann a ɛfa asorɔkye tenten pɔtee bi ho ankasa no yɛ nokware sen sɛ wɔde wɔn ho bɛto kɔla a ɛte sɛ nea ɛwɔ hɔ nkutoo so.
Wobetumi ayɛ kɔla ahorow a ɛnyɛ hann wɔ baabi a ɛho nhia sɛ wotumi hu nneɛma no anaasɛ baabi a nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe hwehwɛ sɛ wɔde aniwa sie denneennen.
Gauge a ɛkɔ so daa boa ɔhyew a wotumi hyɛ ho nkɔm, hyehyɛ ne cavity rigidity wɔ production web no nyinaa so.
Stable roll winding ne web flatness boa ahotoso aduan, tension control ne kɔ so blister-machine adwumayɛ.
Ɛsɛ sɛ wɔhwɛ nnuru PVC a emu da hɔ sɛ efĩ, ahum, nsensanee tuntum, gel, nsensanee ne sintɔ afoforo a ebetumi aka nhwehwɛmu a wɔde aniwa hu anaasɛ sɛnea wɔawie nneɛma a wɔde ahyɛ mu no hwɛbea.
Ɛsɛ sɛ wɔde sɔhwɛ kwan a ɛfata no kyerɛ tensile, impact ne mfiridwuma ho ahwehwɛde afoforo wɔ baabi a ɛho hia kɛse ma adetɔfo no blister nsakrae nhyehyɛe no.
Ɛsɛ sɛ nnurutɔfoɔ hunu nnuruyɛ ho nwoma, monomer a aka, atutena ne baabi a wɔrekɔ-gua ahwehwɛdeɛ a ɛfa PVC grade pɔtee no ho sene sɛ wɔde wɔn ho bɛto 'nnuru grade' nkyerɛkyerɛmu a ɛyɛ generic nko ara so.
Ɛsɛ sɛ Supplier qualification gyina nkrataa a ɛfa product grade pɔtee ne production batch ho so. Ɛsɛ sɛ adetɔfo kyerɛkyerɛ mfiridwuma ne mmara ho nkrataa a wɔhwehwɛ mu ansa na wɔapene aguadi mu nneɛma a wɔde ma so.
Wallis krataafa a ɛwɔ hɔ mprempren no de PVC nkyerɛkyerɛmu krataa a edidi so yi ma. Ɛsɛ sɛ adetɔfo si so dua sɛ adansedi krataa no fa PVC grade ne batch pɔtee a wɔretɔ no ho.
Kratafa a ɛwɔ hɔ mprempren no nso kura PVDC nkyerɛkyerɛmu adansedi krataa. Esiane sɛ ade a ɛwɔ kratafa yi so no yɛ plain rigid PVC , ɛsɛ sɛ wɔfa PVDC krataa yi sɛ nea ɛfa ho nkutoo na ɛnyɛ sɛ COA ma plain PVC ade no.
Fa ade no tu mmirika fa ankasa forming mold ne packaging afiri no susuw cavity nsusuwii, ɔfasu thinning, wɛb suban ne aniwa sintɔ ahorow.
Fa production lidding foil no kyerɛ sealing-temperature, pressure ne dwell-time window a mfaso wɔ so.
Hwɛ unwinding, wɛb tracking, aduan, forming, sealing ne twa wɔ ananmusifo aguadi production ahoɔhare.
Ɛsɛ sɛ wɔpene plain PVC so wɔ baabi a ade a wɔawie no di nnuru no ahwehwɛde a wɔagye atom sɛ ɛbɛgyina pintinn no ho dwuma wɔ tebea horow a wɔhwehwɛ sɛ wɔde sie no mu nkutoo.
Wobetumi aka thickness ho asɛm wɔ manufacturing range a ɛwɔ hɔ no mu sɛnea cavity geometry, rigidity ne blister-machine ahwehwɛde ahorow te.
Wobetumi apaapae roll trɛw mu sɛnea blister nhyehyɛe ne nnwinnade nhyehyɛe te wɔ production trɛw a ɛwɔ hɔ no mu.
Wobetumi aka PVC a ɛyɛ transparent, tinted, colored ne opaque ho asɛm sɛnea nneɛma a wotumi hu ne branding ahwehwɛde ahorow te.
Wobetumi asusuw glossy, matte ne project-specific surface requirements sɛnea optical appearance ne downstream processing te.
Core diameter, roll tenten, maximum roll diameter, roll mu duru, winding akwankyerɛ ne packaging betumi akyerɛ sɛnea customer no line.
Kyerɛ sɛ ebia aduru a wɔde hyɛ akisikuru no mu, nnuru a wɔde hyɛ nipadua mu, aduannuru, mmoa ho nnuru anaa dodow foforo a wɔde ma na kyerɛ nsu, mframa pa anaa hann biara a wonim.
Fa film no mu duru a wɔhwehwɛ anaa nkyerɛkyerɛmu a wɔde di dwuma mprempren wɔ wo blister line no so ma.
Kyerɛ roll trɛw, trɛw tolerance, core diameter, maximum roll diameter ne winding akwankyerɛ.
Fa manufacturer, model, forming type ne normal production speed ma de boa nneɛma nhwehwɛmu.
Fa tablet anaa capsule kɛseɛ ne cavity a wɔawie no tenten, ne tɛtrɛtɛ ne ne bun ka ho wɔ baabi a ɛwɔ hɔ.
Kyerɛ lidding foil ne heat-seal lacquer a wɔde di dwuma mprempren sɛnea ɛbɛyɛ a wobetumi ahwɛ sɛnea sealing hyia.
Kyerɛ kɔla a ɛyɛ transparent, tinted anaa opaque ka ho ne glossy, matte anaa surface ahwehwɛde afoforo.
Fa gua a wɔrekɔ ne nnuru a wɔhwehwɛ, atutra, monomer a aka, DMF anaa adetɔfo pɔtee ho nkrataa a wɔhwehwɛ ma.
Mprempren Wallis nneɛma ho nsɛm kyerɛ MOQ a wɔtaa de di dwuma a ɛyɛ bɛyɛ kilogram 500. Ɛsɛ sɛ wɔsi sɔhwɛ-ahyɛdeɛ a ɛwɔ hɔ, free-sample nhyehyɛeɛ ne MOQ a ɛtwa toɔ no so dua sɛdeɛ ne kɛseɛ, ne tɛtrɛtɛ, ne kɔla ne ne yɛ nhyehyɛeɛ teɛ.
Nnuruyɛ mu akisikuru a wɔyɛ no daa hwehwɛ sɛ wɔhwɛ nneɛma no mu duru, ne soro su, roll winding ne forming suban. Ɛsɛ sɛ adetɔfoɔ a wɔresesa ɔdemafoɔ a ɔwɔ hɔ dada no de PVC sini foforɔ no toto ho denam cavity design, lidding foil ne production tebea koro no ara so ansa na wɔapene so.
Nnuruyɛ PVC Nneɛma a Wɔyɛ
Nnuru a wɔde kyekyere nneɛma ho sɔhwɛ adwumayɛbea
Wallis boa nnuru a wɔde kyekyere nneɛma a wɔdannan ne mfiridwuma mu adetɔfo a wɔde PVC nsusuwii a wɔayɛ no sɛnea wɔpɛ, nhoma mmobɔwee ho nkyerɛkyerɛmu, kɔla nkɔso, nhwɛsode ne nneɛma a wɔde kɔ amannɔne sɛnea adwuma no ahwehwɛde te.
Pharmaceutical rigid PVC yɛ thermoformable forming web a wɔde yɛ cavities ma tablets, capsules ne nneɛma afoforo a ɛfata wɔ amanne kwan so blister packaging mu.
Ne kɛse a ɛfata gyina aduru no kɛse, abura no mu dɔ, afiri ne blister rigidity a wɔhwehwɛ so. Wallis mprempren de bɛyɛ 0.15–0.80 mm ma, bere a ɛsɛ sɛ wɔpaw nea wɔde kyekyere nneɛma pɛpɛɛpɛ no denam sɔhwɛ a wɔde yɛ nneɛma so.
Mprempren Wallis nkyerɛkyerɛmu no kyerɛ ntrɛwmu a ɛkɔ bɛyɛ mm 680. Wobetumi aka slitting a wɔayɛ no sɛnea wɔpɛ ho asɛm sɛnea blister-machine ne web-layout ahwehwɛde ahorow te.
Plain PVC ma nsuo akwansideɛ a ɛsua koraa sɛ wɔde toto nnuruyɛ nhyehyɛeɛ a wɔatu ho ama a ɛwɔ akwansideɛ kɛseɛ ho a. Wɔtaa paw baabi a wobetumi de PVC akisikuru a wɔtaa de di dwuma no adi aduru no gyinabea ahwehwɛde ahorow ho dwuma.
Dabi, nsu a wɔtwetwe no kyerɛ nsu a ade no ankasa twetwe. Wɔde WVTR ne nneɛma a wɔawie no gyina pintinn wɔ ɔhyew ne ɔhyew tebea a wɔakyerɛkyerɛ mu mu na ɛsɔ nsuo akwansideɛ a ɛwɔ nnuru a wɔde kyekyere nneɛma mu no hwɛ yie.
Plain PVC ma pefeeyɛ, rigidity ne thermoformability. PVC /PVDC de PVDC akwanside a wɔde kata so a ɛma nsuo ne oxygen ahobanbɔ tu mpɔn kɛseɛ ma nnuru a wɔde yɛ nnuru a ɛyɛ mmerɛw kɛseɛ ka ho.
Ebia nnuru a wɔde yɛ nnuru a ɛyɛ nsuo a ɛyɛ nwini kɛseɛ anaasɛ ɛhwehwɛ sɛ ɛyɛ adwuma foforɔ no bɛhia akwansideɛ nhyehyɛeɛ a ɛyɛ den te sɛ PC TFE-based film anaa cold-form aluminium. Ɛsɛ sɛ paw no gyina nnuru a wɔde gyina pintinn ho nsɛm ne nneɛma a wɔde ahyɛ mu no ho nhyehyɛe so.
Aluminum aduru a wɔde kata so a wɔtaa de di dwuma no betumi de ɔhyew-nsɔano lacquer a wɔayɛ sɛ ɛbɛkyekyere PVC adi dwuma. Ɛsɛ sɛ wɔsɔ foil, lacquer ne PVC a wɔaka abom no hwɛ pɛpɛɛpɛ de si aguadi nsɔano mfɛnsere no so dua.
Wobetumi asusuw abasobɔde a ɛfata ho ama ahoɔhare kɛse a wɔde yɛ akisikuru, nanso sɛnea ɛne no hyia no gyina afiri no pɛpɛɛpɛ, sini no mu duru, ɔhyew ho nsɛm, abura no geometry, nhoma mmobɔwee nhyehyɛe ne nsɔano tebea so.
Wobetumi de mfiridwuma a ɛyɛ den abien no nyinaa asusuw PVC a ɛyɛ den a ɛfata ho. Esiane sɛ ɛsono sɛnea wɔma ɛyɛ hyew ne sɛnea wɔyɛ no nti, ɛsɛ sɛ wɔkyerɛw ahwehwɛde no wie wɔ mfiri a wɔpɛ sɛ wɔde di gua no so.
Aane. Wobetumi asusuw akwan a ɛda adi, tint, kɔla ne opaque a wɔpaw ho abom ne glossy, matte ne nneɛma afoforo a wɔhwehwɛ wɔ soro.
Kɔla nkutoo nkyerɛ sɛ nnuru a wɔde bɔ hann ho ban. Ɛsɛ sɛ nneɛma a ɛma hann no kyerɛ asorɔkye tenten a ɛfata ne nea ɛkɔ soro sen biara, na ɛsɛ sɛ wɔgye nneɛma a wɔawie no tom sɛnea ɛfata.
Sterile aduruyɛ-mfiri a wɔde kyekyere nneɛma hwehwɛ sɛ wɔma nneɛma no, nkataso nhyehyɛe, nsɔano no mudi mu kura, sterilization nhyehyɛe ne aduruyɛ-mfiri a wɔde kyekyere nneɛma ho ahwehwɛde ahorow a ɛfata no yɛ nokware wɔ ɔkwan soronko so. Ɛnsɛ sɛ wosusuw sɛ ɛfata fi asɛmfua nnuruyɛ PVC nkutoo mu.
Ɛgyina wo ahwehwɛdeɛ nhyehyɛeɛ so no, bisa mfiridwuma ho nsɛm krataa, batch COA ne pharmacopoeial, migration, residual monomer, regulatory anaa customer-specific documentation a ɛfata ma PVC grade no pɛpɛɛpɛ.
Mprempren Wallis nsɛm kyerɛ MOQ a wɔtaa de di dwuma a ɛyɛ bɛyɛ kilogram 500. MOQ a etwa to ne sɔhwɛ-ahyɛde a ɛwɔ hɔ no gyina ne kɛse, ne tɛtrɛtɛ, ne kɔla, ne soro ne mprempren adeyɛ nhyehyɛe so.
Aane. Wɔkamfo nhwɛsode sɔhwɛ kyerɛ ma thermoforming, aluminium-lidding compatibility, mfiri mmirikatu, cavity hwɛbea ne nneɛma su ansa na wɔapene aguadi mu.
Yɛsrɛ sɛ fa nnuru no, PVC kɛse, roll trɛw, core kɛse, kɔla, soro awie, blister-machine model, cavity dimensions, aluminium lidding specification, mmara ahwehwɛde ne akontaabu dodow a wɔbɛtɔ no ma.
Send Wallis wo PVC thickness, roll trɛw, blister-machine model, cavity dimensions, kɔla, lidding foil ne dodow a wɔhwɛ kwan sɛ wobɛtɔ. Yebetumi aka rigid PVC forming film a wɔde yɛ tablet, capsule, nutraceutical ne nnuru a wɔde yɛ blister packaging ho asɛm.
Sɛ woresesa nnuru PVC a wɔde ma dedaw a, fa mprempren TDS, COA anaa reference roll no ma sɛnea ɛbɛyɛ a wobetumi asusuw ne kɛse, emu da hɔ, thermoforming, sealing ne mfiri-running ahwehwɛde ahorow ho ansa na wɔayɛ no kɛse.
