|
kaad ho nsɛm
Wallis na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Nneɛma a wɔde yɛ: | |
| Dwumadi: | |
| Dodow: | |
Wallis kɔla PVC krataa a wɔde fitaa akata so yɛ kaad substrate a wotumi tintim a wɔayɛ ama sikakorabea kaad, sikasɛm kaad, ID kaad, smart card, access card, membership card ne laminated plastic card nhyehyɛe afoforo. Ɛka kɔla a ɛyɛ den PVC nnyinaso ne tintim fitaa a wɔahyɛ so bom sɛnea ɛbɛyɛ a wɔn a wɔyɛ no betumi anya mfonini beae a ɛhyerɛn bere a wɔkora kɔla soronko kaad no mu anaa ano.
Wobetumi ayɛ nneɛma no sɛnea wɔpɛ denam nnyinaso kɔla, fitaa a wɔde kata so, krataa no kɛse, krataa kɛse, ɔfasu awie ne tintim grade so. Sɛ wopɛ sɛ wotumi de ho to so sɛ wɔbɛyɛ nneɛma pii a, ɛsɛ sɛ wɔpaw abasobɔde pɔtee no sɛnea nhoma tintim mfiri, ink nhyehyɛe, Overlay film nhyehyɛe, lamination kyinhyia, chip anaa antenna nhyehyɛe ne kaad sɔhwɛ a etwa to ahwehwɛde ahorow te.
| Parameter | B2B Nkyerɛkyerɛmu |
|---|---|
| Atadeɛ | PVC kaad krataa a ɛyɛ den a ɛwɔ kɔla nnyinaso ne fitaa a wotumi tintim |
| Base Kɔla ahorow | Kɔla kɔkɔɔ, bruu, ahabammono, kɔkɔɔ ne amanne kɔla a egyina kɔla nkyerɛkyerɛmu a wɔapene so so |
| Nneɛma a wɔde kata so | White printing layer a wɔde tintim nhoma; ɛsɛ sɛ wosi coating coverage ne ɔfã biako anaa ɔfã abien nhyehyɛe so dua bere a wɔregye nhwɛsode no |
| Nneɛma a ɛyɛ den | Wɔayɛ no sɛnea wɔatintim layer, core nhyehyɛe, Overlay film nkabom ne botae a wɔawie-kaad no kɛse te |
| Krataa no Kɛse | Standard card-production sheet formats anaasɛ amanne kwan so nsusuwii a egyina tintim ne punching nhyehyɛe so |
| Ntintim Abasobɔde | Offset, silk screen anaa UV tintim grade a wɔapaw sɛnea ink ne nnwinnade te; dijitaal anaa inkjet a wɔde akata so a wɔahyira so hwehwɛ sɛ wosi so dua wɔ ɔkwan soronko so |
| Downstream Processing a Wɔde Di Dwuma | Ntintim, ɔhyew lamination, wu twa, punching, chip embedding, magnetic stripe nkabom ne kaad personalization |
| Nnwuma a Wɔde Di Dwuma | Sikakorabea kaad, credit ne debit card, ID card, access card, ahɔhodan kaad, asɔremma kaad, akyɛde kaad ne smart card a wɔayɛ no sɛnea wɔpɛ |
| Nhwɛsode a Wɔpene So | Ɛsɛ sɛ wɔpene kɔla, coating, print adhesion, lamination ne finished-card adwumayɛ so ansa na wɔayɛ no kɛse |
Kɔla fitaa PVC krataa yɛ kaad adeɛ a ɛyɛ adwuma pii a ɛwɔ kɔla a ɛyɛ den PVC substrate ne fitaa a ɛwɔ soro a wɔayɛ sɛ ɛbɛgye mfonini a wɔatintim. Kɔla nnyinaso no da so ara da adi wɔ mmeae a wɔapaw anaasɛ wɔ kaad no ano, bere a ade fitaa a wɔde kata so no ma akyi a ɛnyɛ afã biara ma ahyɛnsode ahorow, mfonini ahorow, nsɛm a ɛyɛ fɛ, barcode ahorow, ahobammɔ nsusuwii ne ahyɛnsode kɔla ahorow.
Wɔ laminated card nhyehyeɛ mu no, wɔtaa de krataa a wɔatintim no ne Overlay film s a ɛne no hyia na, baabi a ɛhia no, RFID inlay, contact-chip module area, magnetic stripe, signature panel anaa dwumadie layer foforɔ bom. Ɛsɛ sɛ wɔsɔ nneɛma a etwa to a wɔaka abom no hwɛ sɛ kaad a wɔaboaboa ano a edi mũ sen sɛ wɔbɛsɔ krataa a wɔde akata so no nkutoo ahwɛ.
| Nneɛma no su | Dwumadie | Titiriw Nteaseɛ a wɔpaw no mpɛn pii |
|---|---|---|
| Kɔla PVC Mfinimfini krataa | Ɛma nhyehyɛe ne kɔla a wotumi hu core anaa ano | Brand nsonsonoe, premium card anim anaasɛ wɔakyerɛkyerɛ mu kɔla layer |
| Kɔla PVC a wɔde White Coating ayɛ | Ɛde kɔla nnyinaso ne beae a ɛhyerɛn a wotumi tintim bom | Nnwuma a ɛhwehwɛ sɛ wɔde kɔla ayɛ substrate ne adwinni a wɔatintim no a wɔsan yɛ no pɛpɛɛpɛ |
| White a Wotumi tintim PVC krataa | Ɛma wonya tintim substrate fitaa a ɛyɛ pɛ | Standard card artwork a ɛho nhia sɛ wɔde kɔla core anaa beae a kɔla a ɛda adi |
| Inkjet anaa Digital Grade a wɔahyira so | Ɔde ade a wɔde kata so a wɔayɛ ama printa ne ink nhyehyɛe pɔtee bi di dwuma | Digitals adwumayɛ nhyehyɛe a entumi mfa offset anaa silk-screen surface a wɔtaa de di dwuma nni dwuma |
Sɛ wotintim tẽẽ wɔ saturated colored substrate so a, ebetumi asesa CMYK gyinapɛn ahorow na atew nsonsonoe so. Layer fitaa a wɔahyɛ so ma ɛyɛ nnyinaso a ɛnyɛ nea ɛfa biribiara ho kɛse, na ɛboa ma printa no san yɛ logos, mfonini ahorow, nsensanee fɛfɛ ne kaad mfonini ahorow a ɛsakra no daa.
Ade a wɔde kata so no betumi atew mfonini a wɔatintim no ne kɔla a ɛwɔ ase no ntam. Ɛsɛ sɛ wɔpene coating opacity, thickness ne coverage so tia adwinni ankasa no efisɛ kɔla ahorow ne mfonini ahorow hwehwɛ masking adwumayɛ soronko.
PVC nnyinaso a ɛwɔ kɔla betumi akɔ so ada adi wɔ kaad no ano anaasɛ wɔ mmeae a wɔahyɛ da ankata so a wɔayɛ no. Eyi ma wɔn a wɔde kaad ma ne wɔn a wɔyɛ kaad no tumi yɛ ade a ɛda nsow a wɔde aniwa hu a wɔmfa tintim akyi fitaa a ehia ma mfonini a ɛkɔ akyiri no mmɔ afɔre.
Ɛsɛ sɛ ade a wɔde akata so no kura ink a ɛbata ho no mu na ɛkɔ so bata PVC nnyinaso no ho wɔ ɔhyew ne nhyɛso akyi. Enti ɛsɛ sɛ sɔhwɛ a wɔpene so no ka tintim, ayaresa, Overlay film lamination, punching ne finished-card flex sɔhwɛ ho.
Nneɛma a wɔde yɛ nneɛma a ɛfata no gyina mfiridwuma a wɔde tintim nhoma ne ink nnuru so. Ɛnsɛ sɛ wɔde krataa a wɔaka ho asɛm sɛ offset printable no di dwuma ɔno ara sɛ ɛne inkjet a egyina nsu so, electrophotographic anaa UV dijitaal nhyehyɛe biara hyia. Wallis kamfo kyerɛ sɛ ɛsɛ sɛ wosi press model, ink brand, curing kwan ne tintim ahoɔhare a wɔhwɛ kwan no so dua ansa na woasiesie nhwɛsode.
| Printing Process | Nneɛma a Wɔhwehwɛ sɛ Wɔkamfo | Kyerɛ sɛ Wɔbɛgye Adi |
|---|---|---|
| Offset Nkyerɛwee | Controlled soro ahoɔden, coating smoothness ne ink anchorage | Ink a ɛyɛ den density, dot awo, drying, tape adhesion ne post-lamination peel sɔhwɛ |
| Silk Screen a Wɔde tintim nhoma | Nkitahodi ne solvent a wɔapaw anaa UV ink na ɛhwehwɛ sɛ wɔde kata so | Mesh-mark anim, ayaresa, adhesion ne resistance akyi lamination |
| UV Digitals Ntintim | Surface a ɛne printa, primer ne UV ink nhyehyɛe no hyia | Cross-hatch adhesion, bending, scratching ne Overlay film bonding |
| Inkjet a Wɔde tintim nhoma | Wɔyɛɛ ade a wɔahyira so a wɔde kata ink so maa ink nnuruyɛ | Mfonini no density, drying, nsuo a ɛko tia, smudging ne lamination compatibility |
| Ɔhyew anaa Personalization Printing | Awiei Overlay film ne soro wie a wɔapaw ama ankorankoro nhyehyɛe no | Ribbon a wɔde kɔ baabi foforo, abrasion, card-reader a wɔde di dwuma ne variable-data a ɛtra hɔ kyɛ |
Kaad a wɔde laminated a wɔtaa yɛ no betumi ayɛ krataa a ɛda adi pefee Overlay film , kɔla fitaa a wɔatintim PVC krataa, core anaa inlay layers biako anaa nea ɛboro saa, layer a ɛto so abien a wɔatintim ne akyi Overlay film . Dual-interface anaa contactless cards nso betumi ayɛ antenna ne chip inlay. Ɛsɛ sɛ wɔbom bu ade biara mu duru ho akontaa na ama wɔanya kaad a wɔawie a wɔakyerɛ no.
Anim a ɛda adi anaasɛ ɛyɛ adwuma Overlay film
Anim tintim fitaa-akata kɔla PVC krataa
PVC core, RFID prelam anaa dwumadie mfimfini layer
Akyi tintim krataa anaasɛ kɔla core layer
Akyi Overlay film a ɛwɔ magnetic stripe a wopɛ, signature panel anaa ahobammɔ afã
White-coated color PVC nkrataa no fata ma B2B card nhyehyɛe a ɛhwehwɛ sɛ wɔde tintim akyi a wɔahyɛ so a ɛka ho ne kɔla substrate anaa kɔla ano. Wobetumi ayɛ nneɛma no ama kaad a wɔtaa de di dwuma ne chip ne contactless structures nso wɔ system-level testing akyi.
Sikakorabea, sika a wɔde gye sika, debit ne prepaid cards
Sikasɛm nkrataa a ɛwɔ nkitahodi abien ne nea enni nkitahodi
Aban, adwumayɛfo ne sukuupɔn no ID nkrataa
Access control ne ahɔhodan mu safe nkrataa
Asɔremma, nokwaredi, VIP ne akyɛde nkrataa
Brand card ahorow a wɔayɛ no sɛnea wɔpɛ a wɔayɛ no kɔla ahorow
Wobetumi ayɛ kɔla ahorow a wɔde gyina so afi honam fam nkyerɛkyerɛmu, aduruyɛdan mu nhwɛsode a wɔapene so anaa kɔla mmara a wɔagye atom mu. Esiane sɛ PVC nhyehyeɛ, ɔfasuo awie ne kanea nya aniwa so nkɛntɛnsoɔ nti, ɛsɛ sɛ wɔkora adeyɛ nhwɛsoɔ a wɔapene so no so sɛ kɔla nkyerɛkyerɛmu ma ahyɛdeɛ a wɔsan yɛ.
Ɛsɛ sɛ adetɔfo kyerɛ sɛ ebia ade a wɔde kata so no yɛ beae a ɛyɛ pɛ anaasɛ wɔpaw, ɔfã biako anaa ɔfã abien, ne sɛ ebia ɛsɛ sɛ mmeae a wɔde kɔla nkata so no kɔ so da adi. Ɛsɛ sɛ wɔhwehwɛ adwinni a wɔkyerɛw din ne coating-edge tolerance bere a wɔregye nhwɛsode no.
Wobetumi aka Matte, smooth anaa project-specific finishes afoforo ho asɛm sɛnea printing ne lamination nhyehyɛe no te. Ɛsɛ sɛ wɔde ink, printa, Overlay film ne lamination parameters ankasa na ɛpene soro grade no so.
Ɛsɛ sɛ krataa no nsusuwii ne adetɔfo no press, collation ne punching nhyehyɛe hyia. Ɛsɛ sɛ RFQ no de krataa kɛse a wɔawie, aburow anaa mfiri akwankyerɛ bere a ɛfata, kaad matrix, dinkyerɛw agyiraehyɛde ne ano tebea a wogye tom ka ho.
| Inspection Item | Nea enti a ɛho hia | Ɔkwan a wɔfa so pene so |
|---|---|---|
| Base Kɔla | Ɛhwɛ sɛnea brand no te ne sɛnea wɔsan kra no so | Fa toto kɔla nhwɛsode a wɔde wɔn nsa ahyɛ ase no ho wɔ kanea tebea horow a wɔapene so mu |
| White Coating Kɔla ne Opacity | Ɛka adwini nsonsonoe ne masking a ɛwɔ kɔla nnyinaso no | Aniwa so ntotoho a wɔde project-specific kɔla anaa opacity susudua ka ho wɔ baabi a ɛho hia |
| Coating Adhesion a wɔde kata so | Ɛtew peeling so bere a wɔretintim, lamination ne card a wɔde di dwuma no | Tape, cross-hatch anaa peel sɔhwɛ a wɔapene so ansa na wɔayɛ lamination ne akyi |
| Nneɛma a Ɛyɛ Den ne Nea Ɛyɛ Petee | Boa tintim dinkyerɛw, collation ne awiei kaad thickness control | Multi-point thickness susuw ne flatness nhwehwɛmu |
| Ahoɔden a ɛwɔ soro ne Print Adhesion | Nkɛntɛnso wɔ wetting, drying ne image durability | Dyne anaasɛ wɔapene so sɛ wɔbɛsɔ ahwɛ wɔ soro a wɔde production-ink adhesion sɔhwɛ di akyi |
| Lamination Bonding a Wɔde Di Dwuma | Siw bubbles, edge lift ne layer mpaapaemu ano | Sɔ kaad a wɔaboaboa ano no nyinaa hwɛ wɔ ɔhyew, nhyɛso ne kyinhyia a wɔahyɛ da ayɛ no mu |
| Finished-Card Adwumayɛ a Wɔde Yɛ Adwuma | Si so dua sɛ adansi no nyinaa yɛ adwuma wɔ nsakrae akyi | Punching, bending, torsion, abrasion ne functional-card sɔhwɛ ahorow sɛnea ɛfata |
Fa kaad dwumadie a ɛtwa toɔ, layer stack, botaeɛ awie thickness, chip anaa antenna design, Overlay film type ne nhyehyɛeɛ a wɔayɛ ama personalization process ma.
Fa nnyinaso kɔla a wɔhwehwɛ, fitaa a wɔde kata so, tintim fael ne brand-kɔla botae ahorow a ɛho hia no ma. Kyerɛ sɛ ebia ɛsɛ sɛ mmeae a wɔde kɔla ayɛ no kɔ so da adi bere a wɔatintim awie no.
Fa nhwɛsode no tu mmirika wɔ press a wopɛ sɛ wode yɛ no so denam production ink, curing nhyehyɛe, Overlay film ne lamination cycle so. Hwɛ mfonini no density, coating adhesion, layer bonding ne card flatness.
Fa wo nsa hyɛ ase na fa krataa a wɔapene so ne kaad a wɔawie no sie sɛ nea wɔde gyina hɔ ma kɔla, nea wɔde kata so, nea efi mu ba a wɔatintim, lamination ne nhwehwɛmu a wɔsan kra.
Wallis de nneɛma a wɔde yɛ kaad ma wɔn a wɔyɛ, wɔn a wɔsakra nneɛma, wɔn a wɔka adwuma no bom ne wɔn a wɔkyekyɛ. Mmoa betumi ayɛ amanne nnyinaso kɔla, coating nkɔso, krataa-kɛse matching, nhwɛso ahosiesie, card-nhyehyɛe nhyehyɛe ne export packaging.
Amanne kɔla ne fitaa coating nkɔso a egyina nhwɛsode a wɔapene so
Nneɛma mmoa a wɔde tintim, Overlay film lamination ne kaad nsakrae
Project-specific krataa kɛseɛ, ne kɛseɛ ne ne soro a wɔpaw
Nhwɛsode ne Sika Nhwɛsode a wɔpene so ansa na wɔayɛ dodow
Export packaging ne B2B ahyɛde nhyehyɛe
Ɛsɛ sɛ krataa a wɔde hwɛ ne nneɛma a wɔde kyekyere nneɛma no bɔ nea wɔakata so no ho ban fi mfutuma, nsensanee, nsuo, akwansideɛ ne deformation ho. Wobetumi aka nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe ho asɛm sɛnea krataa no nsusuwii, nneɛma dodow a wɔkra, ɔkwan a wɔfa so de nneɛma ne adetɔfo nkyerɛwde a wɔhwehwɛ te.
| Nsɛm a Wɔhwehwɛ | a Wɔde Ma |
|---|---|
| Kaad a Wɔde Di Dwuma | Sikakorabea kaad, ID kaad, access card, asɔremma kaad, akyɛde krataa anaa adwuma foforo |
| Base PVC Kɔla | Kɔla koodu, honam fam nhwɛsode anaasɛ nkyerɛkyerɛmu a ɛwɔ hɔ dedaw a wɔapene so |
| White Coating a Wɔde Kata Nneɛma So | Afã biako anaa abien, full anaa selective coverage, hwehwɛ sɛ wie na opacity botae |
| Ɔkwan a Wɔfa so tintim nhoma | Press model, ink type, curing kwan ne dodow a wɔde tintim afã horow |
| Krataa no mu Nkyerɛkyerɛmu | Ne kɛse, ne tɛtrɛtɛ, ne tenten, ne dodow ne ne packing a wɔpɛ |
| Kaad a Wɔyɛ | Overlay film , core, inlay, magnetic stripe, chip ne nea etwa to a ɛyɛ den a wɔhwehwɛ |
| Nneɛma a Ɛfa Nneɛma Pa Ho | Kɔla a wɔde gyina ano, coating adhesion, soro ahoɔden, lamination ne finished-card sɔhwɛ ahorow |
Ɛyɛ PVC kaad substrate a ɛwɔ kɔla a ɛyɛ den a ɛwɔ soro layer fitaa a wotumi tintim. Kɔla nnyinaso no ma wohu kaad no, bere a fitaa a ɛwɔ so no boa adwinni a wɔsan yɛ a emu da hɔ na wotumi hyɛ ho nkɔm.
Base kɔla a ɛyɛ tumm anaa ɛyɛ ma betumi asesa CMYK gyinapɛn ahorow na atew nsonsonoe so. Layer fitaa kata kɔla a ɛwɔ ase no so na ɛma akyi a ɛnyɛ afã biara kɛse ma nsɛm, ahyɛnsode, mfonini ne ahobammɔ mfonini.
Wobetumi de offset grades ama, nanso ɛsɛ sɛ wɔde adetɔfo no ink ankasa, press, drying tebea, Overlay film ne lamination cycle sɔ krataa no hwɛ ansa na wɔayɛ no kɛse.
Ɛnyɛ nea ɛba ara kwa. Inkjet a wɔde nsu yɛ ne dijitaal nhyehyɛe ahorow bi hwehwɛ sɛ wɔde kata so a wɔatu ho ama a ɛgye ink. Ɛsɛ sɛ wosi printa no mfonini ne ink chemistry no so dua ansa na wɔapaw ade no grade.
Aane. Wobetumi ayɛ kɔla ahorow a wɔahyɛ da ayɛ afi kɔla mmara anaa honam fam nkyerɛkyerɛmu bi mu. Ɛsɛ sɛ wɔde nhwɛsode a wɔde wɔn nsa ahyɛ ase di dwuma sɛ gyinapɛn a wɔde yɛ nneɛma a wɔyɛ ne nea wɔsan kra.
Wobetumi aka ɔfã biako anaa ɔfã abien a wɔde kata so ho asɛm sɛnea kaad no nhyehyɛe ne sɛnea wɔatintim no te. Ɛsɛ sɛ wɔkyerɛkyerɛ coating coverage, registration ne surface ahwehwɛdeɛ mu wɔ RFQ no mu.
Ebia nneɛma a wɔde kata so a wɔpaw anaasɛ adwini a wɔayɛ no bɛma mmeae a wɔapaw a wɔde kɔla ayɛ no ada adi. Ɛsɛ sɛ wɔfa nhwɛsode ahorow so si coating hye ne print registration no so dua.
Wobetumi asusuw ho sɛ layer a wɔatintim wɔ dual-interface construction mu. Ɛsɛ sɛ wɔbom sɔ stack a edi mũ no hwɛ, a RFID inlay, Overlay film s, chip cavity ne lamination parameters ka ho.
Nhwehwɛmu a wɔkamfo kyerɛ no bi ne base kɔla, fitaa a wɔde kata so sunsuma ne opacity, thickness, flatness, coating adhesion, soro ahoɔden, print adhesion, lamination bonding ne finished-card mechanical tests.
Wobetumi asusuw nhwɛsode ahorow ho ama kɔla, ade a wɔde kata so, tintim ne lamination nhwehwɛmu. Nkɔso a wɔayɛ no sɛnea wɔpɛ no betumi ahwehwɛ adwinni, kɔla ahorow a wɔde gyina hɔ ma ne kaad-nhyehyɛe ho nsɛm ansa na wɔasiesie nhwɛsode.
Fa Sika Nhwɛsode a wɔde wɔn nsa ahyɛ ase sie na kyerɛkyerɛ ɔkwan a wɔapene so a wɔfa so de toto ho no mu. Ɛsɛ sɛ wɔhwɛ nneɛma a wɔkra no mpɛn pii no de toto base-color, coating ne finished-card reference koro no ara ho.
Fa application, base kɔla, coating coverage, tintim kwan, krataa nsusuwii, thickness, dodow, card-layer nhyehyɛe, sɔhwɛ gyinapɛn ne packaging ahwehwɛde ma.
Send Wallis wo kɔla nkyerɛkyerɛmu, coating ahwehwɛde, tintim kwan, krataa specification, card nhyehyɛe ne akontaabu dodow a wɔkra. Mfiridwuma ne adetɔn akuw no betumi asiesie adwuma pɔtee bi ho nneɛma ho nyansahyɛ ne nhyehyɛe a wɔde bɛyɛ nhwɛso.
