|
PET PE na ɛyɛ adwuma
WALLIS na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Kɛse: | |
| mfaso: | |
| Dodow: | |
Wallis de PET/EVOH/PE high-barrier composite sheet ne roll material ma nnuruyɛ, nhwehwɛmu, akwahosan ne nsuo a wɔde kyekyere nneɛma soronko ho dwumadie. Multilayer nhyehyeɛ no ka PET mfiridwuma mmoa, EVOH oxygen-akwansideɛ layer ne PE sealing layer bom de boa product ahobanbɔ, ɔhyew sealing ne downstream packaging nsakraeɛ.
Thickness, layer nhyehyɛe, roll trɛw, kɔla, opacity ne soro ahwehwɛde betumi customized sɛnea nnuru a wɔde yɛ, packaging afiri, forming nhyehyɛe, sealing tebea ne botae akwanside adwumayɛ.
Wɔ nnuruyɛ mu dwumadie mu no, ɛsɛ sɛ wɔde aduru ankasa, reagent anaa formulation a ɛka ho ne tebea a wɔahyɛ da ayɛ, ahyɛ mu ma, ahyɛ mu ma, sterilization, akwantuo ne akoraeɛ tebea no di dwuma de hwɛ sɛ ɛfata a ɛtwa toɔ. Enti ɛsɛ sɛ wɔkyerɛkyerɛ akwanside ne nea ɛne ne ho hyia ahwehwɛde ahorow mu ansa na wɔayɛ nneɛma pii.
PET ma mfiridwuma mmoa, dimensional stability ne nnyinaso a ɛfata ma packaging nsakrae. PET layer no boa ma composite no kɔ so kura ne nhyehyɛe mu wɔ winding, transport, forming ne filling adwumayɛ mu.
Wɔde EVOH ka ho titiriw sɛ oxygen ne gas akwanside a ɛkɔ soro. Ebetumi aboa ma oxygen a ɛkɔ nnuru anaa nneɛma a wɔde hwehwɛ yare a ɛyɛ mmerɛw mu no so atew bere a wɔayɛ nhyehyɛe a ɛwɔ ntoatoaso pii no yiye na wɔabɔ ho ban afi nneɛma a atwa yɛn ho ahyia a ɛka akwanside adwumayɛ ho no.
PE betumi ayɛ adwuma sɛ ade a ɛne no di nkitaho anaasɛ nea ɛkata so a egyina sɛnea wɔayɛ nneɛma a wɔde ahyɛ mu no so. Ɛboa ɔhyew a wɔde siw ano na ɛboa ma nsuo ntumi nkɔ mu berɛ a ɛboa ma wɔbɔ EVOH a ɛwɔ ntoatoasoɔ pii nhyehyɛeɛ no mu no ho ban.
Nsonsonoe a edidi so yi gyina hɔ ma nsɛm a wɔtaa yɛ a ɛfa Wallis ade yi ho mprempren. Ɛsɛ sɛ wɔsi nhyehyeɛ a ɛtwa toɔ, ne kɛseɛ ne adwumayɛ ho nsɛnkyerɛnneɛ so dua sɛdeɛ nnuruyɛ mu dwumadie a wɔahyɛ da ayɛ no teɛ.
| Parameter | Typical Nkyerɛkyerɛmu / Nsɛm a Wɔahyɛ no Nsow |
|---|---|
| Nhyehyɛeɛ | PET / EVOH / PE a wɔde nneɛma pii ayɛ |
| Ne Nyinaa a Ɛyɛ Den | Bɛyɛ 80–300 μm; customizable a egyina nhyehyɛe a etwa to so |
| Layer Range a ɛyɛ nea wɔtaa yɛ | PET 60-120 μm + EVOH 15-30 μm + PE 20-40 μm na ɛyɛ nea ɛwɔ hɔ; wobetumi asusuw nsusuwii afoforo ho |
| Roll no Trɛw | Bɛyɛ 30–1000 mm; customized widths a ɛwɔ hɔ a egyina sɛnea wɔayɛ no so dua |
| Kɔla / Opacity a ɛnyɛ nea ɛda adi | Transparent, tinted anaa customized opacity sɛnea product-ahobammɔ ahwehwɛde ahorow te |
| Oxygen Akwanside | Oxygen-akwanside adwumayɛ a ɛkorɔn a efi EVOH; ɛsɛ sɛ wɔde sɔhwɛ tebea horow kyerɛ OTR pɔtee |
| Nsuo Akwanside | Egyina PE layer, ne nyinaa nhyehyɛe, ne kɛse ne sɔhwɛ tebea horow so; si botae WVTR so dua bere a wɔrekyerɛkyerɛ mu |
| Ɔhyew a Wɔde Sie | PE nsɔano a wɔde hyɛ mu; ɛsɛ sɛ wɔde sealing window di dwuma wɔ adetɔfo no nnwinnade so |
| Forming / Nsakyeraeɛ | Thermoforming, cutting, sealing ne project-specific packaging nsakraeɛ a ɛgyina structure validation so |
| Ntintim / Agyiraehyɛde | Batch ho nsɛm, nna a ɛbɛtwam, ahyɛnsodeɛ ne agyiraeɛhyɛdeɛ foforɔ a ɛwɔ ink a ɛne no hyia ne surface treatment |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Layer nhyehyɛe, ne nyinaa kɛse, roll trɛw, kɔla, opacity, soro ne packaging |
Nnuru a wɔde yɛ PET/EVOH/PE Nwoma mmobɔwee
PET/EVOH/PE Nnuru a Wɔde Gu Nneɛma Mu
Ɛsɛ sɛ wɔde adwumayɛ ho ahwehwɛde a wotumi susuw na ɛkyerɛ akwanside a ɛkorɔn a wɔde kyekyere nneɛma sen sɛ wɔde nsɛmfua te sɛ 'very low permeability' nkutoo bedi dwuma. Nneɛma mmienu a ɛho hia ne Oxygen Transmission Rate (OTR) ne Water Vapor Transmission Rate (WVTR).
OTR kyerɛ oxygen dodow a ɛfa beae bi a wɔakyerɛkyerɛ mu wɔ nneɛma a wɔde kyekyere nneɛma mu bere tenten. Wɔ PET/EVOH/PE nhyehyɛe mu no, EVOH layer no titiriw na ɛma oxygen-akwanside adwumayɛ tu mpɔn.
WVTR kyerɛkyerɛ nsu-nsuo a ɛnam nneɛma a wɔde kyekyere nneɛma so no so. Nsuo adwumayɛ gyina multilayer adansiɛ a ɛdi mũ no so, a PE thickness ne structure parameters foforɔ ka ho.
Ɛsɛ sɛ wɔde OTR ne WVTR gyinapɛn toto ho bere a wonim sɔhwɛ no hyew, ɔhyew a ɛwɔ hɔ, nhwɛsode no mu duru ne ɔkwan a wɔfa so sɔ hwɛ nkutoo. Ɛsɛ sɛ adetɔfo nso ma emu da hɔ sɛ ebia wɔsusuw akwanside bo a wɔaka no wɔ nneɛma a ɛyɛ tratraa so anaasɛ wɔ ade a wɔayɛ so.
EVOH layer no boa ma oxygen a ɛfa ade a wɔde ahyɛ mu no so tew, na ɛma nhyehyɛe no fata ma nneɛma a oxidation control yɛ ade titiriw a wɔhwehwɛ wɔ nneɛma a wɔde ahyɛ mu no mu.
PE betumi ama ɔhyew-sealing interface a ɛho hia ma filling ne sealing nhyehyɛe pii. Ɛsɛ sɛ wɔde adetɔfoɔ no nnwinnade ne awareɛ nneɛma si hɔ ankasa seal-initiation temperature, seal ahoɔden, tra bere ne nhyɛsoɔ.
PET boa dimensional stability ne mfiridwuma mmoa bere a winding, converting, packaging ne akwantu. Awiei koraa no stiffness gyina PET thickness ne total multilayer adansi.
Nneɛma a wɔde yɛ nneɛma a ɛda adi pefee betumi ama wɔahu nneɛma a wɔyɛ no bere a wɔkura oxygen-akwanside a ɛwɔ mu no mu. Wobetumi aka adan a wɔde tinted anaa nea ɛnyɛ hann kɛse nso ho asɛm wɔ baabi a ɛho hia sɛ wɔhwɛ hann so foforo.
Layer thickness ne total structure betumi ayɛ nsakrae sɛnea akwanside botae ahorow, forming bun, sealing ahwehwɛde, product sensitivity ne packaging-line tebea horow.
Ɔhyew a wɔde siw ano yɛ nhyehyɛe no su sen sɛ ɛbɛyɛ ade din nkutoo. Seal adwumayɛ gyina PE grade, layer thickness, sealing temperature, tra bere, nhyɛso, mating web ne packaging-machine nhyehyɛe so.
Ɛsɛ sɛ adetɔfo de packaging-machine sealing temperature range a ɛwɔ hɔ dedaw, line ahoɔhare ne sealing pressure ma wɔ baabi a ɛwɔ hɔ.
Ɛsɛ sɛ wɔde lidding anaa mating material ankasa sɔ nsɔano ahoɔden hwɛ sen sɛ wɔbɛsɔ ahwɛ afi PET/EVOH/PE forming web nkutoo mu.
Ɛsɛ sɛ wɔhwehwɛ pack a wɔawie no mu hwɛ sɛ nsɔano no mudi mu kura ne nsuo a ɛretu wɔ tebea a wɔhwɛ kwan sɛ wɔde bɛhyɛ mu, de akɔ ne nneɛma a wɔde sie no mu.
Wobetumi ayɛ PET/EVOH/PE nneɛma a wɔabom ayɛ ama thermoforming ne nneɛma afoforo a wɔadan no nneɛma a wɔde kyekyere nneɛma. Forming adwumayɛ gyina ne nyinaa thickness, PET su, layer adhesion, ɔhyew profile ne draw bun.
Akwanside ahorow no yɛ tratraa bere a wɔtrɛw nneɛma mu bere a wɔreyɛ thermoforming no. Enti, wontumi nsusuw sɛ akwanside adwumayɛ a wɔsusuw wɔ nhoma mmobɔwee a ɛyɛ tratraa so no yɛ pɛ wɔ abura a wɔayɛ no fã a emu dɔ sen biara no.
Baabi a akwansideɛ adwumayɛ ho hia no, ɛsɛ sɛ adetɔfoɔ di package a wɔahyehyɛ no ho adanseɛ wɔ ananmusifoɔ forming tebea mu sene sɛ wɔde wɔn ho bɛto flat-sheet OTR anaa WVTR data nko ara so.
Fa thermoforming mfiri su, nkuku bun, line ahoɔhare ne hwɛ kwan sɛ forming-temperature window bere a woresusuw customized nhyehyɛe.
Wobetumi asusuw PET/EVOH/PE nhyehyeɛ ho ama nnuru nsuo a wɔde kyekyere nneɛma wɔ baabi a ɛhia sɛ oxygen akwansideɛ, nsɔano mudi mu kura ne nneɛma a ɛne ne ho hyia.
Nsuo a wɔde hwehwɛ yareɛ ne reagents betumi anya mfasoɔ afiri akwansideɛ kɛseɛ a wɔde kyekyere nneɛma mu, nanso ɛsɛ sɛ wɔde reagent no dodoɔ pɔtee ne tebea a wɔahyɛ da de sie no yɛ sɔhwɛ sɛ ɛne ne ho hyia.
Nneɛma a ɛyɛ mmerɛw sɛ oxidative degradation betumi ayɛ candidates ama packaging structures a EVOH oxygen-barrier layer wom, a ɛhyɛ shelf-life ne stability validation ase.
Wobetumi aka nneɛma a wɔde tinted anaa opaque ayɛ ho asɛm ama nneɛma a ɛhwehwɛ sɛ hann a wɔde fa so no so tew. Ɛsɛ sɛ wɔkyerɛkyerɛ asorɔkye tenten ahobammɔ a wɔhwehwɛ mu sɛnea nnuru a wɔayɛ no te.
Wobetumi nso asusuw akwanside nhyehyɛe ahorow a wɔayɛ no sɛnea wɔpɛ no ho ahwɛ sɛ vitamin, nsu a wɔde yɛ aduannuru, nneɛma a wɔde hwehwɛ yare ne akwahosan ho nneɛma afoforo a ɛhwehwɛ sɛ wɔhwɛ oxygen ne nsu a wɔde di dwuma so.
Vitamin anaa Nnuru a Ɛko Tia Ɔyare
Nnuruyɛ mu Nsu a Wɔde Di Dwuma
Diagnostic & Nnuru a Wɔde Yɛ Nhwehwɛmu
Ɛnsɛ sɛ wɔka PET/EVOH/PE ho asɛm sɛ ɛne nnuru API, solvent, reagent anaa formulation biara hyia wɔ amansan nyinaa mu. Product-contact suitability gyina PE layer pɔtee, additives, nnuru a ɛwɔ mu, dodow, pH, bere a wɔde sie ne ɔhyew so.
Ɛsɛ sɛ adetɔfo hwehwɛ sɛnea dimensional stability, swelling, extraction, seal integrity ne barrier retention bere a ɛne nnuru a wɔpɛ sɛ wɔyɛ no adi nkitaho akyi.
Baabi a mmara anaa nnuruyɛ mu su pa nhyehyɛeɛ hwehwɛ sɛ wɔtu kɔ baabi foforɔ, deɛ wɔyi firi mu, nsuo a ɛtumi firi mu anaa awuduru ho nhwehwɛmu no, ɛsɛ sɛ wɔkyerɛkyerɛ sɔhwɛ nhyehyɛeɛ a ɛfata mu ma nhyehyɛeɛ a wɔawie a wɔde kyekyere nneɛma.
Nneɛma a akwanside kɛse wom betumi aboa ahobammɔ a wɔde bɔ nneɛma ho ban, nanso ɛsɛ sɛ wɔde nnuru no nkwa nna a etwa to denam nnuruyɛfo no nhyehyɛe a ɛma nneɛma gyina pintinn no so si hɔ. Nneɛma a wɔde kyekyere nneɛma nkutoo ntumi nkyerɛ sɛ ɛbɛtra hɔ bere pɔtee bi.
Sterilization a ɛne ne ho hyia no gyina PET/EVOH/PE adansi pɔtee ne sterilization nhyehyɛe no so. Ɛnsɛ sɛ wobu ade bi sɛ ɛne autoclave, ɔhyew a ɛyɛ dry, radiation, ethylene oxide anaa akwan foforo a wɔfa so yɛ sterilization no hyia ara kwa a wonni ho adanse.
Ɛsɛ sɛ adetɔfo de sterilization mfiridwuma, ɔhyew, bere a wɔde da wɔn ho adi, nhyɛso ne kyinhyia dodow ma. Afei ɛsɛ sɛ wɔsɔ nneɛma a wɔawie no hwɛ sɛ ɛyɛ deformation, layer adhesion, seal ahoɔden, barrier retention ne product compatibility.
Nnuru a wɔde kyekyere nneɛma ho ahwehwɛde ahorow gu ahorow wɔ ɔman, aduru no su ne dodow a wɔde ma mu. Sɛ anka wɔde wɔn ho bɛto asɛm bi a ɛfa biribiara ho te sɛ 'nnuru a ɛne ne ho hyia so no,' ɛsɛ sɛ adetɔfoɔ kyerɛ mmara, nnuruyɛ anaa adetɔfoɔ su pa ahwehwɛdeɛ pɔtee a ɛfa adwuma no ho.
Nwoma a wɔhwehwɛ no betumi ayɛ nneɛma ho nkyerɛkyerɛmu, adansedie nkrataa a ɛkyerɛ sɛ wɔayɛ nhwehwɛmu, nsɛm a ɛfa nneɛma a wɔahyehyɛ ho, quality-system nkrataa, atutena ho sɔhwɛ anaa kyerɛwtohɔ foforɔ a egyina gua a wɔrekɔ ne nnuruyɛfoɔ no ahwehwɛdeɛ nhyehyɛeɛ so.
Wobetumi aka layer ratios ho asɛm sɛnea botae OTR, WVTR, total thickness, forming adwumayɛ ne heat-sealing ahwehwɛde ahorow te.
Wobetumi de roll dimensions atoto adetɔfo no packaging ne converting mfiri de atew slitting a ɛho nhia, handling ne nneɛma a wɔsɛe no so.
Wobetumi asusuw nhwɛsode ahorow ho ahwɛ akwanside adwumayɛ, ɔhyew-nsɔano nneyɛe, nea ɛyɛ, nsusuwii a ɛyɛ den ne nneɛma a ɛne ne ho hyia ansa na wɔayɛ aguadi.
Wallis boa nnuru a wɔde kyekyere nneɛma a wɔdannan nneɛma, nnuruyɛ mu nneɛma a wɔde kyekyere nneɛma, wɔn a wɔyɛ nhwehwɛmu ne mfiridwuma mu adetɔfo afoforo a wɔhwehwɛ nneɛma a wɔde kyekyere nneɛma a wɔayɛ no sɛnea wɔpɛ.
Nnuru a Wɔde Gu Nneɛma Mu Factory
Nnuru a Wɔde Gu Nneɛma Mu Nhwehwɛmu dan
Nnuruyɛ nneɛma a wɔde kyekyere nneɛma ho Production Line
Nnuru a wɔde kyekyere nneɛma ho Production Line
Kyerɛkyerɛ nnuru, nhwehwɛmu anaa akwahosan ho aduru ne ade a wɔde ahyɛ mu a wɔawie no mu.
Kyerɛ PET/EVOH/PE anaasɛ fa wo multilayer nhyehyɛe a ɛwɔ hɔ dedaw no ma sɛ wuhia ade a ɛne no sɛ anaasɛ ɛyɛ papa a.
Fa total thickness ne ankorankoro layer ahwehwɛde ahorow ma wɔ baabi a wɔakyerɛkyerɛ mu dedaw.
Fa botaeɛ akwansideɛ botaeɛ ka ho ne sɔhwɛ hyeɛ, nsuo a ɛyɛ nwini ne sɔhwɛ kwan wɔ baabiara a ɛbɛyɛ yie.
Kyerɛ roll trɛw a wɔhwehwɛ, roll diameter anaa mu duru ne core ahwehwɛde ahorow sɛnea packaging line no te.
Fa cavity dimensions, twetwe bun, forming nnwinnade ne adwumayɛ tebea sɛ ade no bɛyɛ thermoformed.
Fa mating material, seal temperature, pressure, tra bere ne line ahoɔhare ka ho sɛ wonim dedaw a.
Kyerɛ nnuru a wɔayɛ anaa nnuru a wɔde di nkitaho tebea horow a ɛsɛ sɛ wosusuw ho bere a wɔreyɛ sɔhwɛ a ɛne sɛ ɛne ne ho hyia no.
Sɛ ɛho hia sɛ wɔde sterilization di dwuma a, kyerɛ ɔkwan pɔtee a wɔfa so yɛ ne kyinhyia tebea horow sɛnea ɛbɛyɛ a wobetumi ahwɛ sɛnea nneɛma no fata.
Fa ɔman a worekɔ, gyinapɛn a wɔhwehwɛ ne nkrataa a wo mmarahyɛ anaa su pa kuw no hwɛ kwan ma.
Mprempren nneɛma ho nsɛm kyerɛ sɛ MOQ a wɔtaa fi ase bɛyɛ kilogram 500, ɛwom sɛ MOQ a etwa to no gyina layer nhyehyɛe a wɔayɛ no sɛnea wɔpɛ, ne nsusuwii ne nneɛma a wɔyɛ so.
Shanghai Wallis Technology de plastic krataa, kaad nneɛma ne nneɛma titiriw a wɔde kyekyere nneɛma ma amanaman ntam B2B adetɔfo. Wobetumi aka nnuru a wɔde kyekyere nneɛma ho adwuma ho asɛm sɛnea nhyehyɛe a wɔhwehwɛ, adwumayɛ, adeyɛ-kwan tebea ne adetɔfo a wɔfata ho nhyehyɛe te.
Customized multilayer nneɛma nkɔso
Thickness ne ntrɛwmu customization
Nhwɛsode mmoa ma packaging-line nhwehwɛmu
B2B ne OEM adwumayɛ mmoa
Nneɛma a wɔde kyekyere nneɛma a wɔde kɔ amannɔne ne amanaman ntam nneɛma a wɔde ma
Mfiridwuma ho nkyerɛkyerɛmu ho nkɔmmɔbɔ ansa na wɔayɛ no kɛse
PET/EVOH/PE yɛ multilayer plastic packaging nhyehyɛe a ɛka PET mfiridwuma su, EVOH oxygen-akwanside adwumayɛ ne PE layer ma sealing ne nsuo ahobammɔ bom. Wobetumi ayɛ nsakrae wɔ layer ratios no mu sɛnea packaging adwumayɛ a wɔhwehwɛ no te.
Wɔde EVOH di dwuma titiriw de ma oxygen ne gas akwanside adwumayɛ tu mpɔn. Ebetumi aboa ma wɔabɔ nneɛma a ɛte sɛ oxygen ho ban bere a wɔde ahyɛ nhyehyɛe a wɔayɛ no yiye a ɛwɔ ntoatoaso pii mu no.
Wɔpaw EVOH titiriw ma oxygen akwanside adwumayɛ. Moisture-barrier adwumayɛ gyina multilayer nhyehyɛe a edi mũ so, a PE ne ahobammɔ layers afoforo ka ho, wɔn kɛse ne sɔhwɛ tebea horow.
Mprempren Wallis nneɛma ahorow no kyerɛ bɛyɛ 80–300 μm ne nyinaa mu duru. Wobetumi aka adan a wɔayɛ no sɛnea wɔpɛ ho asɛm sɛnea akwanside, nhyehyɛe ne nsɔano ahwehwɛde ahorow te.
Mprempren kwan a ɛtaa ba no bɛyɛ 30–1000 mm. Trɛw a etwa to a ɛwɔ hɔ no gyina nhyehyɛe, ne kɛse ne nea wɔhwehwɛ so.
OTR a wɔhwehwɛ no gyina oxygen a ɛwɔ ade a wɔakyekyere no mu, shelf-life target ne package geometry so. Fa OTR a wɔde asi wɔn ani so no ka ho ne ɔhyew, nsuo a ɛyɛ nwini ne sɔhwɛ kwan sɛdeɛ ɛbɛyɛ a wɔbɛtumi de nneɛma atoto ho yie.
WVTR a wɔhwehwɛ no gyina nsuo a ɛwɔ aduru no mu ne baabi a wɔhwɛ kwan sɛ wɔbɛkora so. Ɛsɛ sɛ wɔkyerɛ sɔhwɛ hyew, ɔhyew ne package nhyehyɛe bom ne botae bo.
Wobetumi ayɛ adan a ɛfata ama thermoforming, nanso ɛsɛ sɛ wɔde nneɛma a wɔde ahyɛ mu no geometry ankasa ne tebea horow a wɔde yɛ nneɛma no susuw ɔhyew a wɔde yɛ, draw depth, layer adhesion ne barrier retention ho.
PE layer no betumi ama ɔhyew-sealing dwumadi. Ɛsɛ sɛ wɔde mating material ne ankasa filling ne sealing equipment di seal ahoɔden ne seal temperature di ho adanse.
Ɛnsɛ sɛ wɔka sɛ amansan nyinaa hyia wɔ nnuruyɛ mu nsu nyinaa ho. Nhyiamu gyina formulation, PE contact layer, concentration, pH, ɔhyew ne bere tenten a wɔde sie so. Wɔkamfo kyerɛ sɛ wɔnyɛ nhwehwɛmu a ɛfa nneɛma a wɔde di dwuma ho.
Ɛsɛ sɛ wosi sterilization compatibility so dua ma multilayer nhyehyɛe ne kyinhyia no pɛpɛɛpɛ. Fa sterilization temperature, pressure, bere tenten ne cycles dodow ma sɛnea ɛbɛyɛ a wobetumi asusuw ade no ne seal a wɔawie no ho.
Wobetumi aka adan a wɔde tinted anaasɛ customized-opacity structures ho asɛm. Ɛsɛ sɛ adetɔfo de hann ho banbɔ ho nkyerɛkyerɛmu a wɔhwehwɛ anaa nneɛma a wɔde yɛ nneɛma ho nsɛm ma de yɛ nhwehwɛmu.
Mmara sodi gyina nneɛma nhyehyɛe pɔtee, nnuru a wɔde di dwuma ne gua a wɔde kɔ so. Ɛsɛ sɛ adetɔfoɔ de mmara anaa nnuruyɛ ho ahwehwɛdeɛ a ɛfata ma sɛdeɛ ɛbɛyɛ a wɔbɛtumi ahwɛ nkrataa ne sɔhwɛ a ɛwɔ hɔ no mu ama aduru pɔtee no.
Wobetumi asusuw nhwɛsode ahorow ho de asusuw ne kɛse, akwanside adwumayɛ, ɔhyew a wɔde siw ano, thermoforming ne nea ɛne adetɔfo no nneɛma a wɔde kyekyere nneɛma ne nea wɔyɛ no hyia ho.
Mprempren nneɛma ho nsɛm kyerɛ sɛ dodow a wɔtaa fi ase bɛyɛ kilogram 500. Nsiesiei a wɔayɛ no sɛnea wɔpɛ, ne trɛw, kɔla ne ahwehwɛde afoforo betumi aka MOQ a etwa to no, enti ɛsɛ sɛ wosi so dua bere a wɔrefa asɛm aka no.
Yɛsrɛ sɛ fa packaging application, product type, ahwehwɛde nhyehyɛe, thickness, roll trɛw, target OTR ne WVTR, forming tebea horow, heat-seal tebea, sterilization nhyehyɛe, mmara ahwehwɛde ne akontaabu order dodow.
Send Wallis wo ahwehwɛde multilayer nhyehyɛe, thickness, roll trɛw, OTR / WVTR botae, forming nhyehyɛe, ɔhyew-sealing tebea horow, product-contact ahwehwɛde ne akontaabu atɔ dodow.
Sɛ woresesa nnuru a wɔde kyekyere nneɛma a ɛwɔ hɔ dedaw a, fa mprempren mfiridwuma ho nkyerɛkyerɛmu anaa nhwɛsode no mena sɛnea ɛbɛyɛ a wobetumi asusuw nhyehyɛe ne nneɛma a wɔde kyekyere nneɛma ho ahwehwɛde ahorow ho ansa na wɔayɛ no aguadi.
