|
Wallis -PVC Krataa a Wɔde Di Dwuma
Wallis na ɔkyerɛwee
| Kɔla: | |
|---|---|
| Kɛse: | |
| Ade: | |
| mfaso: | |
| Dwumadi: | |
| Dodow: | |
Wallis PVC ntade template krataa yɛ plastic ade a ɛyɛ den a wɔayɛ ama ntade nsusuwso yɛ, ntade twitwa akwankyerɛ, sewing template ne reusable production stencils. Ne nkratafa nhyehyɛe a ɛyɛ den no boa wɔn a wɔyɛ ntade no ma wɔde nsusuwso ahorow kɔ baabi foforo mpɛn pii bere a wɔretwitwa ntama na wɔresiesie ntama no.
Wɔyɛ no kɛseɛ firi 0.05 mm kɔsi 6.0 mm, Wallis rigid PVC krataa no bɛtumi de ama wɔ standard sizes a 700 × 1000 mm, 915 × 1830 mm ne 1220 × 2440 mm ka ho, ne nsusuiɛ a wɔahyɛ da ayɛ. Transparent, translucent ne opaque options wɔ hɔ a glossy, matte anaa frosted surfaces.
Wɔ ntadehyɛ adwumayɛbea ahorow a wɔyɛ adwumaden, adan a wɔde nsusuwso yɛ ne ntade ayɛfo fam no, ɛsɛ sɛ wɔpaw krataa no ho nkyerɛkyerɛmu a ɛfata sɛnea nsusuwso no kɛse te, sɛnea wɔpɛ, ɔkwan a wɔfa so twa, sɛnea ɛda adi pefee, nea wɔhwehwɛ sɛ wɔde agyiraehyɛde hyɛ ne mpɛn dodow a wɔhwɛ kwan sɛ wɔbɛsan de adi dwuma no te. Wɔkamfo kyerɛ sɛ wɔnyɛ nhwɛsode sɔhwɛ bere a wɔde ɔkwan foforo a wɔfa so twitwa nneɛma a ɛyɛ kɛse anaa nea wɔde twa ade reba no.
| Parameter | Nkyerɛkyerɛmu |
|---|---|
| Adwadeɛ | PVC Atade Template Krataa / Rigid PVC Krataa |
| Atadeɛ | PVC / Polyvinyl Chloride a wɔde yɛ nneɛma |
| Nneɛma a Wɔde Ma no Format | Sheet / Roll Sɛnea Wɔakyerɛ no |
| Nneɛma a ɛyɛ den | 0.05 mm–6.0 mm |
| Standard Sizes a Wɔde Di Dwuma | 700 × 1000 mm, 915 × 1830 mm, 1220 × 2440 mm anaasɛ Wɔayɛ no sɛnea wɔpɛ |
| Ahosuo | Kɔla Ahorow, Clear anaa Opaque |
| Nneɛma a wɔyɛ no pefee | Nhumu / Translucent / Opaque |
| Ani | Glossy / Matte / Nsukyenee a ɛyɛ hyew |
| Ntade a Wɔde Di Dwuma | Ntade Nhwɛso Nhwɛsode, Ntama Twitwa Akwankyerɛ, Nwene Nhwɛsode, Ntade Stencils ne Nhwɛso-Pia Nnwinnade |
| Nnwuma Afoforo a Wɔde Di Dwuma | Vacuum Forming, Packaging, Nhoma Nkataso, Nnaka a Wɔbobɔw ne Plastic Converting Applications Afoforo |
| Nneɛma a wɔyɛ no sɛnea wɔpɛ | Thickness, Sheet Size, Kɔla, Transparency ne Surface Finish |
PVC ntadeɛ nsusuiɛ krataa yɛ plastic krataa a ɛyɛ den anaa ɛyɛ den fã a wɔde yɛ ntadeɛ nsusuiɛ a wɔtumi de di dwuma bio, akwankyerɛ a wɔde twa ne stencils a wɔde yɛ nneɛma. Sɛ wɔyɛ ntadeɛ nhyehyɛɛ bi na wɔpene so wie a, wɔbɛtumi de ne nsusuiɛ akɔ PVC mu ma enti wɔbɛtumi de nhyehyɛɛ korɔ no ara adi dwuma mpɛn pii berɛ a wɔreyɛ ntadeɛ.
Sɛ wɔde toto bere tiaa mu krataa anaa krataa a wɔde yɛ nsusuwso ho a, plastic nsusuwso ma ano a ɛyɛ den na ɛfata yiye ma mmeae a wɔyɛ nneɛma a ɛsɛ sɛ wɔhyɛ ɔkwan anaa ade koro no ara agyirae anaa wotwa mpɛn pii.
PVC a ɛda adi no ho wɔ mfaso titiriw bere a ɛsɛ sɛ adwumayɛfo hu ntama agyiraehyɛde, aburow kwankyerɛ, nsusuwso a wɔatintim anaa mmeae a ɛne ne ho hyia wɔ nsusuwso no ase no. Wobetumi apaw nkrataa a ɛyɛ translucent ne opaque nso bere a ɛho nhia sɛ wotumi hu denam template no so.
Sɛ wɔdan nsusuwso bi ma ɛyɛ PVC nsusuwso a ɛyɛ den wie a, wɔn a wɔyɛ adwuma no betumi ahwehwɛ nsusuwii koro no ara mu anaasɛ wɔde asi hɔ mpɛn pii. Eyi boa ma nneɛma a wɔyɛ no akuw ahorow no kɔ so yɛ pɛ na ɛtew nsakrae a ɛbata bere tiaa mu nhyehyɛe ahorow a asɛe anaasɛ akyinkyim ho no so.
PVC a ɛyɛ mmerɛw ma wɔn a wɔyɛ adwuma no hu ntama a ɛwɔ nsusuwso no ase no. Eyi betumi ayɛ nea mfaso wɔ so bere a woresiesie checks, stripes, printed motifs, reference marks anaa nneɛma afoforo a wotumi hu ansa na woadi akyi anaasɛ woatwitwa.
Wobetumi de plastic nsusuwso a ɛyɛ den asie na wɔasan de adi dwuma ama nneɛma a wɔkra mpɛn pii, ntade afã horow a wɔahyɛ da ayɛ ne sɛnea wɔyɛ no mpɛn pii, na ɛtew hia a ehia sɛ wɔsan yɛ bere tiaa mu nsusuwso akwankyerɛ ahorow bere biara no so.
Wobetumi de nsusuwso nɔma, akɛse, nwene ho nkyerɛkyerɛmu, aburow akwankyerɛ, notches ne nkyerɛkyerɛmu ho nsɛm aka nsusuwso ahorow ho denam agyiraehyɛde, tintim anaa nkyerɛwee akwan a ɛne ne ho hyia so.
Template dwumadie ahodoɔ hwehwɛ sɛ wɔyɛ nsakraeɛ ne kateeyɛ ahodoɔ. Wallis de 0.05–6.0 mm nneɛma ahorow a ɛtrɛw ma enti adetɔfo betumi apaw nneɛma sɛnea ankasa nhwɛso-yɛ ne fabrication nhyehyɛe.
Wobetumi adan PVC nkratafa ayɛ no master patterns a wotumi de di dwuma bio ama ntade, trako, jacket, ntade, ntade ne ntade afoforo. Wobetumi akyerɛw nsusuwso a wɔawie no din na wɔde asie ma wɔayɛ no mpɛn pii.
Nsusuwii a ɛyɛ den betumi ayɛ honam fam akwankyerɛ ama nsaano agyiraehyɛde ne twitwa adwuma a wɔapaw, aboa adwumayɛfo ma wɔadi nhyehyɛe a ɛkɔ so daa akyi bere a wɔreyɛ ntama afã horow a wɔtaa yɛ no.
Wobetumi nso ayɛ PVC templates ama sewing-position references, kotokuo, kɔla, cuffs, labels, decorative stitching ne ntadeɛ dwumadie foforɔ a wɔahyɛ da ayɛ.
Nnwumayɛbea ahorow betumi ayɛ stencil ahorow a wotumi de di dwuma bio a wɔde besisi ahyɛnsode ahorow, nkyerɛwde ahorow, bɔton ahorow, ntokuru, kotoku ne ntade ho nsɛm afoforo wɔ baabi a ɛho hia sɛ wɔde si hɔ mpɛn pii.
Wobetumi de nsusuwso a wɔapene so no akɔ PVC nneɛma a ɛyɛ den kɛse mu de asie wɔ ntadeyɛ dwumadibea ahorow, nhwɛso dan ahorow ne nneɛma a wɔyɛ ho nhwɛso nhomakorabea ahorow.
PVC a ɛyɛ den ma wonya nsusuwso ano a ɛyɛ den sen krataa nneɛma a wɔtaa de di dwuma, na ɛma ɛfata ma ntade adwumayɛbea ahorow a wodi nneɛma a wɔyɛ ho nhyehyɛe koro no ara ho dwuma mpɛn pii na wɔhwehwɛ mu.
Nsiesiei a ɛyɛ den no boa ma nsusuwso ahorow no kɔ so yɛ nea wɔahyɛ da ayɛ bere a wɔde sie sɛnea ɛsɛ na wɔde nsusuwso-dan mu di dwuma mpɛn pii no. Ɛsɛ sɛ wɔpaw ne kɛse a ɛfata ma nsusuwii akɛse anaa nneɛma a wɔde di dwuma a ɛhwehwɛ sɛ ɛyɛ den kɛse.
Wobetumi de mfiri atwitwa PVC nkratafa na wɔayɛ no ntade a wɔde ayɛ ntama, curves, openings, notches ne pattern ho nsɛm afoforo. Ɛsɛ sɛ wɔpaw ɔkwan a wɔfa so twa no sɛnea krataa no mu duru ne anoano pɛpɛɛpɛ a wɔhwehwɛ te.
Nkratafa a ɛyɛ transparent, translucent ne opaque ma pattern makers flexibility sɛ wɔbɛpaw ntama a wotumi hu kɛse ne nsonsonoe a emu yɛ den a wɔde aniwa hu wɔ template categories ntam.
Wobetumi apaw glossy, matte ne frosted surfaces sɛnea handling, visibility ne marking ahwehwɛde ahorow te. Ɛsɛ sɛ adetɔfo de ɔfasu a wɔapaw no sɔ kyerɛwdua, ink anaa tintim akwan hwɛ ansa na wɔayɛ no kɛse.
Nkratafa nsusuwii a wɔahyɛ da ayɛ ne nea wɔayɛ no sɛnea wɔpɛ no ma ntade adwumayɛbea ahorow tumi de nneɛma a wɔde yɛ nneɛma no hyia kɛse ne wɔn nsusuwii nsusuwii ne nnwinnade a wɔde twa nneɛma no, na ɛboa ma wɔtew nneɛma a wɔde twitwa nneɛma a ɛho nhia so.
Wallis de PVC a ɛtrɛw a ɛyɛ den fi 0.05 mm kosi 6.0 mm ma. Nanso, ɛnsɛ sɛ wɔkyerɛ range no nyinaa ase sɛ ɛfata pɛpɛɛpɛ ma ntade-nsusuwii biara. Gauge a ɛfata no gyina nsakrae a wɔhwehwɛ, stiffness, template dimensions ne ɔkwan a wɔfa so twa so.
PVC a ɛyɛ tratraa ma wotumi yɛ nsakrae kɛse na emu duru sua. Wobetumi asusuw ho wɔ baabi a nhwɛso no nhia katee kɛse ne baabi a ɛnyɛ den sɛ wobedi ho dwuma anaasɛ roll-format supply ho hia kɛse.
Wɔ master patterns a wotumi san de di dwuma ho no, ɛsɛ sɛ adetɔfo paw ne kɛse a ɛma anoano yɛ den sɛnea ɛsɛ ma tracing ne di dwuma bere a ɛda so ara yɛ nea mfaso wɔ so ma twa ne sie.
Ebia template akɛse anaa fixtures a ɛhwehwɛ sɛ ɛyɛ den kɛse behia PVC krataa a ɛyɛ den. Ɛsɛ sɛ wosusuw template nsusuwii, ɔkwan a wɔfa so sie ne nnwinnade a wɔde twa nneɛma ho ansa na wɔapaw gauges a emu yɛ duru.
Sɛ wo adwumayɛbea no resakra afi cardboard, plastic foforo anaa PVC gauge soronko so a, sɔhwɛ nhwɛsode ahorow betumi aboa ma wɔahu sɛnea ɛkari pɛ yiye wɔ rigidity, cutting speed, edge quality, weight ne cost ntam.
Nsusuwii a ɛda adi pefee ma wɔn a wɔyɛ adwuma no hu ntama a ɛwɔ krataa no ase, a mfaso wɔ so bere a wɔde nsensanee, nhwehwɛmu, mfonini a wɔatintim, ntama no sintɔ anaa nkyerɛkyerɛmu agyiraehyɛde a ɛwɔ hɔ dedaw no hyia no.
Nneɛma a ɛyɛ hann ma wotumi hu fã bi bere a ɛma ɛyɛ mmerɛw sɛ wobehu nsonsonoe a ɛda ntama no ani ntam no. Ebetumi ama wɔanya apam a mfaso wɔ so wɔ nea wotumi hu ne nea wotumi hu ntam.
Opaque ne kɔla templates betumi aboa adwumayɛbea ahorow ma wɔahyehyɛ nsusuwso ahorow denam ntade su, kɛse, dwumadibea anaa ɔkwan a wɔfa so yɛ adwuma wɔ baabi a ɛho nhia sɛ wɔde see-through alignment.
Ɛdenam ne kɛse so no, wobetumi de mfiri a ɛfata a wɔde twa nneɛma adi dwuma de ayɛ PVC a ɛyɛ den no ho adwuma. Nkratafa a ɛyɛ tratraa ne nkratafa a ɛyɛ den a emu yɛ duru hwehwɛ sɛ wɔde nnwinnade ahorow di dwuma, enti ɛsɛ sɛ wɔde ɔkwan a wɔfa so twa no ne gauge a wɔapaw no hyia.
Wobetumi de CNC mfiri adi dwuma ama PVC gauges a ɛyɛ den a ɛfata bere a ntade adwumayɛbea ahorow hwehwɛ sɛ wɔsan yɛ curves, slots, openings anaasɛ template geometry a ɛyɛ den kɛse. Ɛsɛ sɛ wɔyɛ nnwinnade no yiye ma PVC ne ano a wɔhwehwɛ no wie.
Wobetumi de nsusuwso din, ntade akɛse, aburow akwankyerɛ, nwene ho nkyerɛkyerɛmu ne nneɛma a wɔyɛ ho mmara aka ho denam kyerɛwdua, ink, nkyerɛwde anaa tintim akwan a ɛne no hyia so. Sɔ adhesion ne akenkan hwɛ wɔ glossy, matte anaa frosted a wɔapaw no so.
PVC templates betumi ayɛ fabricated ne alignment ntokuru, positioning agyiraehyɛde, sewing notches ne afoforo reference features a ɛhwehwɛ wɔ ntadeyɛ nhyehyɛe.
| Template Material | Mfaso Titiriw | a Ɛsɛ sɛ Wosusuw Ho |
|---|---|---|
| PVC Krataa a ɛyɛ den | Reusable, nsu-resistant, ɛwɔ hɔ transparent, ɛnyɛ den sɛ wobɛsesa | Ɛsɛ sɛ ne kɛse ne ɔkwan a wɔfa so twa ne stiffness a wɔhwehwɛ no hyia |
| Krataa a wɔde ayɛ krataa | Mfitiaseɛ ka a ɛba fam na ɛnyɛ den sɛ wɔde nsa twitwa | Nsonsonoe ne ne nsusuwii betumi asɛe ntɛmntɛm bere a wɔde di dwuma mpɛn pii anaasɛ nsu a ɛyɛ nwini no |
| Dadeɛ | High rigidity na ɛyɛ den anoano | Nea emu yɛ duru na mpɛn pii no ɛyɛ den sɛ wɔbɛsesa anaasɛ wɔbɛyɛ |
Wɔ ntadeyɛ mu no, wobetumi asan de ntade nhyehyɛe a wɔapene so adi dwuma wɔ ahyɛde ahorow pii a wɔde yɛ ntade mu. Honam fam nsusuwso a ɛtra hɔ kyɛ ma pattern-room ne cutting-room akuw nya nkyerɛkyerɛmu a ɛyɛ pintinn a wobetumi akyerɛw, ahyehyɛ na wɔagye bere a wɔayɛ ɔkwan koro no ara bio no.
Wobetumi nso atew nsusuwso ahorow no mu denam ne kɛse, ɔkwan a wɔfa so yɛ no nɔma, ntama su anaa sɛnea wɔde di dwuma so. PVC a ɛwɔ kɔla ne nea ɛnyɛ hann a wɔpaw betumi aboa ma wɔayɛ nhyehyɛe a wɔde aniwa hu, bere a wobetumi de nkratafa a ɛda adi pefee asie ama dwumadie a ɛhwehwɛ sɛ wɔde ntama hyia pɛpɛɛpɛ.
Enti wɔ ntadeɛ adwumayɛbea akɛseɛ fam no, ɛnyɛ PVC boɔ nko ara ne adetɔ gyinapɛn a ɛho hia, na mmom ne kɛseɛ a ɛkɔ so pɛpɛɛpɛ, nkratafa nsusuiɛ, nea ɛda adi pefee, ne soro tebea, ntwitwa suban ne nea wɔsan yɛ wɔ nneɛma a wɔkra ntam nso.
Kyerɛ sɛ ebia wɔde PVC no bɛyɛ ntadeɛ a ɛyɛ nwonwa, akwankyerɛ a wɔde twa, nwene a wɔde pam, stencil a wɔde si baabi anaa ntadeɛ a wɔyɛ no foforɔ.
Paw ne kɛse sɛnea wɔhwehwɛ sɛ ɛyɛ mmerɛw, ɛyɛ den, template nsusuwii, mpɛn dodow a wɔde di dwuma ne nnwinnade a wɔde twa. Wallis nneɛma nyinaa trɛw fi 0.05 mm kosi 6.0 mm.
Nkratafa akɛse a wɔahyɛ da ayɛ no bi ne 700 × 1000 mm, 915 × 1830 mm ne 1220 × 2440 mm. Wobetumi asusuw nsusuwii ahorow a wɔayɛ no sɛnea wɔpɛ ho bere a nkrataa a wɔahyɛ da ayɛ no ma nneɛma a wɔsɛe no boro so no.
Paw nneɛma a ɛda adi bere a ntama a ɛne ne ho hyia ho hia, nneɛma a ɛyɛ hann ma wotumi hu fã bi anaasɛ nneɛma a ɛnyɛ hann na ɛwɔ kɔla bere a nhwɛsode a wobehu no yɛ ade titiriw.
Glossy, matte ne frosted surfaces wɔ su ahorow a ɛsono sɛnea wohu ne sɛnea wodi ho dwuma. Sɛ wɔbɛtintim anaa wɔbɛhyɛ nsusuwso ahorow agyirae a, sɔ ink anaa ɔkwan a wɔfa so hyɛ agyirae a woapaw no hwɛ wɔ ɔfasu a wɔhwehwɛ no so.
Ka kyerɛ Wallis sɛ ebia wɔde nsa bɛtwitwa nneɛma no, wɔde mfiri atwitwa, wɔde bɛfa kwan so anaasɛ wɔde mfiri a wɔde yɛ nsusuwso a wɔde wɔn ankasa yɛ adwuma bedi dwuma. Eyi boa ma nneɛma a wɔakyerɛkyerɛ mu no ne ɔkwan a wɔfa so yɛ no hyia.
Sɛ wopɛ B2B asɛm a wɔafa aka a ɛyɛ nokware a, yɛsrɛ wo fa nsɛm a edidi so yi ma bere biara a ɛwɔ hɔ:
PVC a ɛyɛ den a wɔhwehwɛ
Krataa kɛse anaa nhoma mmobɔwee nsusuwii a wɔhwehwɛ
Transparent, translucent anaa opaque ahwehwɛde
Kɔla a wɔhwehwɛ
Glossy, matte anaasɛ frosted soro
Garment template anaasɛ application foforo a etwa to
Manual, mfiri anaa CNC twa kwan
Ntintim, agyiraehyɛde anaa engraving ahwehwɛde
Dodow a wɔhwehwɛ
Destination gua so
Nneɛma a wɔde kyekyere nneɛma a wɔde kɔ amannɔne ho ahwehwɛde ahorow
Sɛ woresesa atadeɛ-nsusuiɛ adeɛ a ɛwɔ hɔ dada a, sɛ wode nhwɛsoɔ anaa mprempren nkyerɛkyerɛmu bɛma a, ɛbɛboa ama woahu ne kɛseɛ, ne denden, ne ho a ɛda adi ne ne soro su a wɔhwehwɛ no pɛpɛɛpɛ.
Wallis de PVC krataa a efi 0.05 mm kosi 6.0 mm ma, na ɛma wɔn a wɔyɛ ntade no nya akwan horow pii a wɔbɛfa so ayɛ nsusuwso a ɛyɛ mmerɛw, nsusuwso a ɛyɛ den a wotumi san de di dwuma ne plastic-kratafa afoforo a wɔde di dwuma.
Nsusuwii a ɛwɔ hɔ a ɛyɛ gyinapɛn no bi ne 700 × 1000 mm, 915 × 1830 mm ne 1220 × 2440 mm, a ɛwɔ akɛse a wɔayɛ no sɛnea wɔpɛ sɛnea adwuma no ahwehwɛde te.
Transparent, translucent na opaque PVC ma ntade adwumayɛbea ahorow no yɛ nea ɛyɛ mmerɛw kɛse bere a wɔrepaw nneɛma a wɔde bɛyɛ alignment, identification ne pattern nhyehyɛe no.
Wobetumi apaw glossy, matte ne frosted surfaces sɛnea di dwuma, agyiraehyɛde, tintim ne aniwa ahwehwɛde ahorow.
Wo ntade-nsusuwii a wode di dwuma, ne kɛse, ne nsusuwii, nea ɛda adi, ne soro ne ɔkwan a wɔfa so yɛ adwuma a wode ma no ma Wallis tumi susuw PVC nkyerɛkyerɛmu a ɛfata kɛse ho ma sɔhwɛ a wɔde yɛ nneɛma.
Ɛsɛ sɛ wɔbɔ PVC ntade nsusuwso nkrataa ho ban fi soro a ɛbɛtwetwe, anoano a ɛbɛsɛe, asɛe ne efĩ bere a wɔde sie na wɔde rekɔ amanaman ntam no. Wobetumi aka nneɛma a wɔde kyekyere nneɛma ho ahwehwɛde ho asɛm sɛnea krataa no kɛse, ne kɛse, ne dodow a wɔkra ne ɔkwan a wɔfa so de mena no te.
PVC ntadeɛ nsusuiɛ krataa yɛ plastic krataa a ɛyɛ den anaa ɛyɛ den fã a wɔde yɛ ntadeɛ nsusuiɛ a wɔtumi de di dwuma bio, ntama twitwa akwankyerɛ, sewing template ne production stencils.
PVC ma ano a ɛyɛ den, a nsu ntumi nkɔ mu ma nsusuwii ahorow a wɔde di dwuma mpɛn pii, hwehwɛ na wɔkora so. Cardboard da so ara betumi ayɛ nea mfaso wɔ so ama bere tiaa mu nhwɛso ahorow anaa nkɔso mmirikatu tiawa.
Mprempren Wallis kyerɛw PVC krataa a ne kɛse yɛ 0.05 mm kosi 6.0 mm. Nea eye sen biara a ɛyɛ den ma atade nsusuwso gyina kateeyɛ a wɔhwehwɛ, krataa no nsusuwii, ɔkwan a wɔfa so twa ne mpɛn dodow a wɔde di dwuma so.
Nsusuwii a wɔahyɛ da ayɛ no bi ne 700 × 1000 mm, 915 × 1830 mm ne 1220 × 2440 mm. Wobetumi nso aka akɛse a wɔahyɛ da ayɛ ho asɛm sɛnea nhwɛso no nsusuwii ne nneɛma a wɔyɛ no ahwehwɛde ahorow te.
Aane. Wallis de PVC a ɛda adi, ɛyɛ hann na ɛnyɛ nea ɛda adi pefee ma. Nkratafa a ɛda adi no ho wɔ mfaso titiriw bere a ɛsɛ sɛ adwumayɛfo de ntama nsensanee, checks, prints anaa reference marks hyia template no.
Kɔla ahorow wɔ hɔ sɛnea mprempren nneɛma no ho nkyerɛkyerɛmu te. Wobetumi nso de kɔla asiesie nsusuwso ahorow sɛnea ntade kɛse, ɔkwan a wɔfa so yɛ, ɔkwan a wɔfa so yɛ anaasɛ adwumayɛbea a wɔyɛ nneɛma.
Wallis kyerɛw PVC a ɛyɛ glossy, matte ne frosted. Paw nea wobɛwie no sɛnea nea ɛda adi, sɛnea wodi ho dwuma, agyiraehyɛde ne tintim ahwehwɛde ahorow te.
Aane. Wobetumi de nsusuwso nɔma, akɛse, aburow akwankyerɛ, agyiraehyɛde a wɔde hyia ne nneɛma a wɔyɛ ho nsɛm aka ho denam agyiraehyɛde, nkyerɛwde, tintim anaa nkyerɛwee a ɛfata so. Sɔ ɔkwan a wɔapaw a wɔfa so hyɛ agyirae no hwɛ wɔ ɔfasu a wɔhwehwɛ no so kan.
PVC gauges a ɛyɛ den a ɛfata betumi de mfiri atwa CNC anaasɛ wɔde afa kwan so. Ɛsɛ sɛ wɔpaw nnwinnade, aduan dodow ne ɔkwan a wɔfa so yɛ adwuma sɛnea nneɛma no kɛse ne anoano su a wɔhwehwɛ te.
Aane. Wobetumi ayɛ ntade nsusuwso a wɔde ntokuru a ɛne ne ho hyia, nwene ho nkyerɛkyerɛmu, notches, mmeae a wɔde si baabi ne nneɛma afoforo a wɔhwehwɛ wɔ ntade a wɔyɛ no mu.
PVC templates fata sɛ wɔde di dwuma mpɛn pii bere a krataa no mu duru ne ɔkwan a wɔfa so yɛ no fata ma dwumadie no. Ɔsom nkwa nna ankasa gyina sɛnea wodi ho dwuma, wotwa nkitahodi, nneɛma a wɔkora so ne nsusuwso nhyehyɛe so.
Fa templates sie baabi a ɛho tew na kwati ɔhyew a ɛho nhia, benkum anaa adesoa a emu yɛ duru a ɛnyɛ pɛpɛɛpɛ. Wobetumi de nsusuwso akɛse asie petee anaasɛ wɔde agyina so sɛnea ne kɛse ne sɛnea ɛyɛ den te.
Standard laser cutting mpɛn pii no ɛnyɛ ɔkwan a wɔpɛ sɛ wɔfa so yɛ adwuma ma PVC efisɛ ɔhyew PVC betumi ama corrosive ne asiane decomposition nneɛma. Ɛsɛ sɛ wosusuw mfiri a wɔde twa, die cutting anaa CNC routing a ɛfata ho mmom sɛnea ɛho hia ne template design.
PVC yɛ ade a wɔde yɛ thermoplastic, nanso sɛnea wɔbɛsan de adi dwuma ankasa no gyina mpɔtam hɔ nneɛma a wɔboaboa ano ne nea wɔsan de di dwuma, nneɛma a wɔyɛ ne efĩ so. Ɛsɛ sɛ adetɔfo a wɔwɔ ahwehwɛde sɛ wɔde nneɛma a wɔde di dwuma bio no si ɔkwan a ɛwɔ hɔ a wɔfa so de nneɛma foforo di dwuma wɔ wɔn mpɔtam hɔ gua so no so dua.
Aane. Wɔ standard sheet dimensions akyi no, wobetumi aka customized sizes ho asɛm sɛnea ntade nhwɛso dimensions, cutting equipment ne material-utilization ahwehwɛde ahorow te.
Wɔ ntade-nsusuwii adwuma foforo ho no, wɔkamfo nhwɛsode nhwehwɛmu kyerɛ sɛnea ɛbɛyɛ a adwumayɛbea no betumi asɔ rigidity, transparency, marking, cutting quality ne handling ahwɛ ansa na wɔapaw production specification a etwa to.
Yɛsrɛ sɛ fa ahwehwɛde thickness, krataa kɛse, transparency, kɔla, soro wie, twa kwan, atade-template application, order dodow ne destination gua. Saa nsɛm yi boa Wallis ma osiesie nsɛm a wɔakyerɛkyerɛ mu ne nsɛm a wɔafa aka a ɛfata kɛse.
